drivers/ide/cy82c693.c

   1 /*
   2  *  Copyright (C) 1998-2000 Andreas S. Krebs (akrebs@altavista.net), Maintainer
   3  *  Copyright (C) 1998-2002 Andre Hedrick <andre@linux-ide.org>, Integrator
   4  *  Copyright (C) 2007-2010 Bartlomiej Zolnierkiewicz
   5  *
   6  * CYPRESS CY82C693 chipset IDE controller
   7  *
   8  * The CY82C693 chipset is used on Digital's PC-Alpha 164SX boards.
   9  */
  10
  11 #include <linux/module.h>
  12 #include <linux/types.h>
  13 #include <linux/pci.h>
  14 #include <linux/ide.h>
  15 #include <linux/init.h>
  16
  17 #include <asm/io.h>
  18
  19 #define DRV_NAME "cy82c693"
  20
  21 /*
  22  *      NOTE: the value for busmaster timeout is tricky and I got it by
  23  *      trial and error!  By using a to low value will cause DMA timeouts
  24  *      and drop IDE performance, and by using a to high value will cause
  25  *      audio playback to scatter.
  26  *      If you know a better value or how to calc it, please let me know.
  27  */
  28
  29 /* twice the value written in cy82c693ub datasheet */
  30 #define BUSMASTER_TIMEOUT       0x50
  31 /*
  32  * the value above was tested on my machine and it seems to work okay
  33  */
  34
  35 /* here are the offset definitions for the registers */
  36 #define CY82_IDE_CMDREG         0x04
  37 #define CY82_IDE_ADDRSETUP      0x48
  38 #define CY82_IDE_MASTER_IOR     0x4C
  39 #define CY82_IDE_MASTER_IOW     0x4D
  40 #define CY82_IDE_SLAVE_IOR      0x4E
  41 #define CY82_IDE_SLAVE_IOW      0x4F
  42 #define CY82_IDE_MASTER_8BIT    0x50
  43 #define CY82_IDE_SLAVE_8BIT     0x51
  44
  45 #define CY82_INDEX_PORT         0x22
  46 #define CY82_DATA_PORT          0x23
  47
  48 #define CY82_INDEX_CHANNEL0     0x30
  49 #define CY82_INDEX_CHANNEL1     0x31
  50 #define CY82_INDEX_TIMEOUT      0x32
  51
  52 /*
  53  * set DMA mode a specific channel for CY82C693
  54  */
  55
  56 static void cy82c693_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive)
  57 {
  58         const u8 mode = drive->dma_mode;
  59         u8 single = (mode & 0x10) >> 4, index = 0, data = 0;
  60
  61         index = hwif->channel ? CY82_INDEX_CHANNEL1 : CY82_INDEX_CHANNEL0;
  62
  63         data = (mode & 3) | (single << 2);
  64
  65         outb(index, CY82_INDEX_PORT);
  66         outb(data, CY82_DATA_PORT);
  67
  68         /*
  69          * note: below we set the value for Bus Master IDE TimeOut Register
  70          * I'm not absolutely sure what this does, but it solved my problem
  71          * with IDE DMA and sound, so I now can play sound and work with
  72          * my IDE driver at the same time :-)
  73          *
  74          * If you know the correct (best) value for this register please
  75          * let me know - ASK
  76          */
  77
  78         data = BUSMASTER_TIMEOUT;
  79         outb(CY82_INDEX_TIMEOUT, CY82_INDEX_PORT);
  80         outb(data, CY82_DATA_PORT);
  81 }
  82
  83 static void cy82c693_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
  84 {
  85         struct pci_dev *dev = to_pci_dev(hwif->dev);
  86         int bus_speed = ide_pci_clk ? ide_pci_clk : 33;
  87         const unsigned long T = 1000000 / bus_speed;
  88         unsigned int addrCtrl;
  89         struct ide_timing t;
  90         u8 time_16, time_8;
  91
  92         /* select primary or secondary channel */
  93         if (hwif->index > 0) {  /* drive is on the secondary channel */
  94                 dev = pci_get_slot(dev->bus, dev->devfn+1);
  95                 if (!dev) {
  96                         printk(KERN_ERR "%s: tune_drive: "
  97                                 "Cannot find secondary interface!\n",
  98                                 drive->name);
  99                         return;
 100                 }
 101         }
 102
 103         ide_timing_compute(drive, drive->pio_mode, &t, T, 1);
 104
 105         time_16 = clamp_val(t.recover - 1, 0, 15) |
 106                   (clamp_val(t.active - 1, 0, 15) << 4);
 107         time_8 = clamp_val(t.act8b - 1, 0, 15) |
 108                  (clamp_val(t.rec8b - 1, 0, 15) << 4);
 109
 110         /* now let's write  the clocks registers */
 111         if ((drive->dn & 1) == 0) {
 112                 /*
 113                  * set master drive
 114                  * address setup control register
 115                  * is 32 bit !!!
 116                  */
 117                 pci_read_config_dword(dev, CY82_IDE_ADDRSETUP, &addrCtrl);
 118
 119                 addrCtrl &= (~0xF);
 120                 addrCtrl |= clamp_val(t.setup - 1, 0, 15);
 121                 pci_write_config_dword(dev, CY82_IDE_ADDRSETUP, addrCtrl);
 122
 123                 /* now let's set the remaining registers */
 124                 pci_write_config_byte(dev, CY82_IDE_MASTER_IOR, time_16);
 125                 pci_write_config_byte(dev, CY82_IDE_MASTER_IOW, time_16);
 126                 pci_write_config_byte(dev, CY82_IDE_MASTER_8BIT, time_8);
 127         } else {
 128                 /*
 129                  * set slave drive
 130                  * address setup control register
 131                  * is 32 bit !!!
 132                  */
 133                 pci_read_config_dword(dev, CY82_IDE_ADDRSETUP, &addrCtrl);
 134
 135                 addrCtrl &= (~0xF0);
 136                 addrCtrl |= (clamp_val(t.setup - 1, 0, 15) << 4);
 137                 pci_write_config_dword(dev, CY82_IDE_ADDRSETUP, addrCtrl);
 138
 139                 /* now let's set the remaining registers */
 140                 pci_write_config_byte(dev, CY82_IDE_SLAVE_IOR, time_16);
 141                 pci_write_config_byte(dev, CY82_IDE_SLAVE_IOW, time_16);
 142                 pci_write_config_byte(dev, CY82_IDE_SLAVE_8BIT, time_8);
 143         }
 144         if (hwif->index > 0)
 145                 pci_dev_put(dev);
 146 }
 147
 148 static void __devinit init_iops_cy82c693(ide_hwif_t *hwif)
 149 {
 150         static ide_hwif_t *primary;
 151         struct pci_dev *dev = to_pci_dev(hwif->dev);
 152
 153         if (PCI_FUNC(dev->devfn) == 1)
 154                 primary = hwif;
 155         else {
 156                 hwif->mate = primary;
 157                 hwif->channel = 1;
 158         }
 159 }
 160
 161 static const struct ide_port_ops cy82c693_port_ops = {
 162         .set_pio_mode           = cy82c693_set_pio_mode,
 163         .set_dma_mode           = cy82c693_set_dma_mode,
 164 };
 165
 166 static const struct ide_port_info cy82c693_chipset __devinitdata = {
 167         .name           = DRV_NAME,
 168         .init_iops      = init_iops_cy82c693,
 169         .port_ops       = &cy82c693_port_ops,
 170         .host_flags     = IDE_HFLAG_SINGLE,
 171         .pio_mask       = ATA_PIO4,
 172         .swdma_mask     = ATA_SWDMA2,
 173         .mwdma_mask     = ATA_MWDMA2,
 174 };
 175
 176 static int __devinit cy82c693_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 177 {
 178         struct pci_dev *dev2;
 179         int ret = -ENODEV;
 180
 181         /* CY82C693 is more than only a IDE controller.
 182            Function 1 is primary IDE channel, function 2 - secondary. */
 183         if ((dev->class >> 8) == PCI_CLASS_STORAGE_IDE &&
 184             PCI_FUNC(dev->devfn) == 1) {
 185                 dev2 = pci_get_slot(dev->bus, dev->devfn + 1);
 186                 ret = ide_pci_init_two(dev, dev2, &cy82c693_chipset, NULL);
 187                 if (ret)
 188                         pci_dev_put(dev2);
 189         }
 190         return ret;
 191 }
 192
 193 static void __devexit cy82c693_remove(struct pci_dev *dev)
 194 {
 195         struct ide_host *host = pci_get_drvdata(dev);
 196         struct pci_dev *dev2 = host->dev[1] ? to_pci_dev(host->dev[1]) : NULL;
 197
 198         ide_pci_remove(dev);
 199         pci_dev_put(dev2);
 200 }
 201
 202 static const struct pci_device_id cy82c693_pci_tbl[] = {
 203         { PCI_VDEVICE(CONTAQ, PCI_DEVICE_ID_CONTAQ_82C693), 0 },
 204         { 0, },
 205 };
 206 MODULE_DEVICE_TABLE(pci, cy82c693_pci_tbl);
 207
 208 static struct pci_driver cy82c693_pci_driver = {
 209         .name           = "Cypress_IDE",
 210         .id_table       = cy82c693_pci_tbl,
 211         .probe          = cy82c693_init_one,
 212         .remove         = __devexit_p(cy82c693_remove),
 213         .suspend        = ide_pci_suspend,
 214         .resume         = ide_pci_resume,
 215 };
 216
 217 static int __init cy82c693_ide_init(void)
 218 {
 219         return ide_pci_register_driver(&cy82c693_pci_driver);
 220 }
 221
 222 static void __exit cy82c693_ide_exit(void)
 223 {
 224         pci_unregister_driver(&cy82c693_pci_driver);
 225 }
 226
 227 module_init(cy82c693_ide_init);
 228 module_exit(cy82c693_ide_exit);
 229
 230 MODULE_AUTHOR("Andreas Krebs, Andre Hedrick, Bartlomiej Zolnierkiewicz");
 231 MODULE_DESCRIPTION("PCI driver module for the Cypress CY82C693 IDE");
 232 MODULE_LICENSE("GPL");