arch/m68knommu/platform/5307/config.c

   1 /***************************************************************************/
   2
   3 /*
   4  *      linux/arch/m68knommu/platform/5307/config.c
   5  *
   6  *      Copyright (C) 1999-2002, Greg Ungerer (gerg@snapgear.com)
   7  *      Copyright (C) 2000, Lineo (www.lineo.com)
   8  */
   9
  10 /***************************************************************************/
  11
  12 #include <linux/kernel.h>
  13 #include <linux/param.h>
  14 #include <linux/init.h>
  15 #include <linux/io.h>
  16 #include <asm/machdep.h>
  17 #include <asm/coldfire.h>
  18 #include <asm/mcfsim.h>
  19 #include <asm/mcfuart.h>
  20 #include <asm/mcfwdebug.h>
  21
  22 /***************************************************************************/
  23
  24 /*
  25  *      Some platforms need software versions of the GPIO data registers.
  26  */
  27 unsigned short ppdata;
  28 unsigned char ledbank = 0xff;
  29
  30 /***************************************************************************/
  31
  32 static struct mcf_platform_uart m5307_uart_platform[] = {
  33         {
  34                 .mapbase        = MCF_MBAR + MCFUART_BASE1,
  35                 .irq            = 73,
  36         },
  37         {
  38                 .mapbase        = MCF_MBAR + MCFUART_BASE2,
  39                 .irq            = 74,
  40         },
  41         { },
  42 };
  43
  44 static struct platform_device m5307_uart = {
  45         .name                   = "mcfuart",
  46         .id                     = 0,
  47         .dev.platform_data      = m5307_uart_platform,
  48 };
  49
  50 static struct platform_device *m5307_devices[] __initdata = {
  51         &m5307_uart,
  52 };
  53
  54 /***************************************************************************/
  55
  56 static void __init m5307_uart_init_line(int line, int irq)
  57 {
  58         if (line == 0) {
  59                 writeb(MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI1, MCF_MBAR + MCFSIM_UART1ICR);
  60                 writeb(irq, MCF_MBAR + MCFUART_BASE1 + MCFUART_UIVR);
  61                 mcf_clrimr(MCFINTC_UART0);
  62         } else if (line == 1) {
  63                 writeb(MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI2, MCF_MBAR + MCFSIM_UART2ICR);
  64                 writeb(irq, MCF_MBAR + MCFUART_BASE2 + MCFUART_UIVR);
  65                 mcf_clrimr(MCFINTC_UART1);
  66         }
  67 }
  68
  69 static void __init m5307_uarts_init(void)
  70 {
  71         const int nrlines = ARRAY_SIZE(m5307_uart_platform);
  72         int line;
  73
  74         for (line = 0; (line < nrlines); line++)
  75                 m5307_uart_init_line(line, m5307_uart_platform[line].irq);
  76 }
  77
  78 /***************************************************************************/
  79
  80 static void __init m5307_timers_init(void)
  81 {
  82         /* Timer1 is always used as system timer */
  83         writeb(MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI3,
  84                 MCF_MBAR + MCFSIM_TIMER1ICR);
  85
  86 #ifdef CONFIG_HIGHPROFILE
  87         /* Timer2 is to be used as a high speed profile timer  */
  88         writeb(MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL7 | MCFSIM_ICR_PRI3,
  89                 MCF_MBAR + MCFSIM_TIMER2ICR);
  90 #endif
  91 }
  92
  93 /***************************************************************************/
  94
  95 void m5307_cpu_reset(void)
  96 {
  97         local_irq_disable();
  98         /* Set watchdog to soft reset, and enabled */
  99         __raw_writeb(0xc0, MCF_MBAR + MCFSIM_SYPCR);
 100         for (;;)
 101                 /* wait for watchdog to timeout */;
 102 }
 103
 104 /***************************************************************************/
 105
 106 void __init config_BSP(char *commandp, int size)
 107 {
 108 #if defined(CONFIG_NETtel) || \
 109     defined(CONFIG_SECUREEDGEMP3) || defined(CONFIG_CLEOPATRA)
 110         /* Copy command line from FLASH to local buffer... */
 111         memcpy(commandp, (char *) 0xf0004000, size);
 112         commandp[size-1] = 0;
 113 #endif
 114
 115         mach_reset = m5307_cpu_reset;
 116         m5307_timers_init();
 117
 118 #ifdef CONFIG_BDM_DISABLE
 119         /*
 120          * Disable the BDM clocking.  This also turns off most of the rest of
 121          * the BDM device.  This is good for EMC reasons. This option is not
 122          * incompatible with the memory protection option.
 123          */
 124         wdebug(MCFDEBUG_CSR, MCFDEBUG_CSR_PSTCLK);
 125 #endif
 126 }
 127
 128 /***************************************************************************/
 129
 130 static int __init init_BSP(void)
 131 {
 132         m5307_uarts_init();
 133         platform_add_devices(m5307_devices, ARRAY_SIZE(m5307_devices));
 134         return 0;
 135 }
 136
 137 arch_initcall(init_BSP);
 138
 139 /***************************************************************************/