arch/arm/mach-s3c2440/mach-osiris.c

   1 /* linux/arch/arm/mach-s3c2440/mach-osiris.c
   2  *
   3  * Copyright (c) 2005-2008 Simtec Electronics
   4  *      http://armlinux.simtec.co.uk/
   5  *      Ben Dooks <ben@simtec.co.uk>
   6  *
   7  * This program is free software; you can redistribute it and/or modify
   8  * it under the terms of the GNU General Public License version 2 as
   9  * published by the Free Software Foundation.
  10 */
  11
  12 #include <linux/kernel.h>
  13 #include <linux/types.h>
  14 #include <linux/interrupt.h>
  15 #include <linux/list.h>
  16 #include <linux/timer.h>
  17 #include <linux/init.h>
  18 #include <linux/gpio.h>
  19 #include <linux/device.h>
  20 #include <linux/sysdev.h>
  21 #include <linux/serial_core.h>
  22 #include <linux/clk.h>
  23 #include <linux/i2c.h>
  24 #include <linux/io.h>
  25
  26 #include <linux/i2c/tps65010.h>
  27
  28 #include <asm/mach/arch.h>
  29 #include <asm/mach/map.h>
  30 #include <asm/mach/irq.h>
  31
  32 #include <mach/osiris-map.h>
  33 #include <mach/osiris-cpld.h>
  34
  35 #include <mach/hardware.h>
  36 #include <asm/irq.h>
  37 #include <asm/mach-types.h>
  38
  39 #include <plat/cpu-freq.h>
  40 #include <plat/regs-serial.h>
  41 #include <mach/regs-gpio.h>
  42 #include <mach/regs-mem.h>
  43 #include <mach/regs-lcd.h>
  44 #include <plat/nand.h>
  45 #include <plat/iic.h>
  46
  47 #include <linux/mtd/mtd.h>
  48 #include <linux/mtd/nand.h>
  49 #include <linux/mtd/nand_ecc.h>
  50 #include <linux/mtd/partitions.h>
  51
  52 #include <plat/gpio-cfg.h>
  53 #include <plat/clock.h>
  54 #include <plat/devs.h>
  55 #include <plat/cpu.h>
  56
  57 /* onboard perihperal map */
  58
  59 static struct map_desc osiris_iodesc[] __initdata = {
  60   /* ISA IO areas (may be over-written later) */
  61
  62   {
  63           .virtual      = (u32)S3C24XX_VA_ISA_BYTE,
  64           .pfn          = __phys_to_pfn(S3C2410_CS5),
  65           .length       = SZ_16M,
  66           .type         = MT_DEVICE,
  67   }, {
  68           .virtual      = (u32)S3C24XX_VA_ISA_WORD,
  69           .pfn          = __phys_to_pfn(S3C2410_CS5),
  70           .length       = SZ_16M,
  71           .type         = MT_DEVICE,
  72   },
  73
  74   /* CPLD control registers */
  75
  76   {
  77           .virtual      = (u32)OSIRIS_VA_CTRL0,
  78           .pfn          = __phys_to_pfn(OSIRIS_PA_CTRL0),
  79           .length       = SZ_16K,
  80           .type         = MT_DEVICE,
  81   }, {
  82           .virtual      = (u32)OSIRIS_VA_CTRL1,
  83           .pfn          = __phys_to_pfn(OSIRIS_PA_CTRL1),
  84           .length       = SZ_16K,
  85           .type         = MT_DEVICE,
  86   }, {
  87           .virtual      = (u32)OSIRIS_VA_CTRL2,
  88           .pfn          = __phys_to_pfn(OSIRIS_PA_CTRL2),
  89           .length       = SZ_16K,
  90           .type         = MT_DEVICE,
  91   }, {
  92           .virtual      = (u32)OSIRIS_VA_IDREG,
  93           .pfn          = __phys_to_pfn(OSIRIS_PA_IDREG),
  94           .length       = SZ_16K,
  95           .type         = MT_DEVICE,
  96   },
  97 };
  98
  99 #define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK
 100 #define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
 101 #define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
 102
 103 static struct s3c24xx_uart_clksrc osiris_serial_clocks[] = {
 104         [0] = {
 105                 .name           = "uclk",
 106                 .divisor        = 1,
 107                 .min_baud       = 0,
 108                 .max_baud       = 0,
 109         },
 110         [1] = {
 111                 .name           = "pclk",
 112                 .divisor        = 1,
 113                 .min_baud       = 0,
 114                 .max_baud       = 0,
 115         }
 116 };
 117
 118 static struct s3c2410_uartcfg osiris_uartcfgs[] __initdata = {
 119         [0] = {
 120                 .hwport      = 0,
 121                 .flags       = 0,
 122                 .ucon        = UCON,
 123                 .ulcon       = ULCON,
 124                 .ufcon       = UFCON,
 125                 .clocks      = osiris_serial_clocks,
 126                 .clocks_size = ARRAY_SIZE(osiris_serial_clocks),
 127         },
 128         [1] = {
 129                 .hwport      = 1,
 130                 .flags       = 0,
 131                 .ucon        = UCON,
 132                 .ulcon       = ULCON,
 133                 .ufcon       = UFCON,
 134                 .clocks      = osiris_serial_clocks,
 135                 .clocks_size = ARRAY_SIZE(osiris_serial_clocks),
 136         },
 137         [2] = {
 138                 .hwport      = 2,
 139                 .flags       = 0,
 140                 .ucon        = UCON,
 141                 .ulcon       = ULCON,
 142                 .ufcon       = UFCON,
 143                 .clocks      = osiris_serial_clocks,
 144                 .clocks_size = ARRAY_SIZE(osiris_serial_clocks),
 145         }
 146 };
 147
 148 /* NAND Flash on Osiris board */
 149
 150 static int external_map[]   = { 2 };
 151 static int chip0_map[]      = { 0 };
 152 static int chip1_map[]      = { 1 };
 153
 154 static struct mtd_partition __initdata osiris_default_nand_part[] = {
 155         [0] = {
 156                 .name   = "Boot Agent",
 157                 .size   = SZ_16K,
 158                 .offset = 0,
 159         },
 160         [1] = {
 161                 .name   = "/boot",
 162                 .size   = SZ_4M - SZ_16K,
 163                 .offset = SZ_16K,
 164         },
 165         [2] = {
 166                 .name   = "user1",
 167                 .offset = SZ_4M,
 168                 .size   = SZ_32M - SZ_4M,
 169         },
 170         [3] = {
 171                 .name   = "user2",
 172                 .offset = SZ_32M,
 173                 .size   = MTDPART_SIZ_FULL,
 174         }
 175 };
 176
 177 static struct mtd_partition __initdata osiris_default_nand_part_large[] = {
 178         [0] = {
 179                 .name   = "Boot Agent",
 180                 .size   = SZ_128K,
 181                 .offset = 0,
 182         },
 183         [1] = {
 184                 .name   = "/boot",
 185                 .size   = SZ_4M - SZ_128K,
 186                 .offset = SZ_128K,
 187         },
 188         [2] = {
 189                 .name   = "user1",
 190                 .offset = SZ_4M,
 191                 .size   = SZ_32M - SZ_4M,
 192         },
 193         [3] = {
 194                 .name   = "user2",
 195                 .offset = SZ_32M,
 196                 .size   = MTDPART_SIZ_FULL,
 197         }
 198 };
 199
 200 /* the Osiris has 3 selectable slots for nand-flash, the two
 201  * on-board chip areas, as well as the external slot.
 202  *
 203  * Note, there is no current hot-plug support for the External
 204  * socket.
 205 */
 206
 207 static struct s3c2410_nand_set __initdata osiris_nand_sets[] = {
 208         [1] = {
 209                 .name           = "External",
 210                 .nr_chips       = 1,
 211                 .nr_map         = external_map,
 212                 .options        = NAND_SCAN_SILENT_NODEV,
 213                 .nr_partitions  = ARRAY_SIZE(osiris_default_nand_part),
 214                 .partitions     = osiris_default_nand_part,
 215         },
 216         [0] = {
 217                 .name           = "chip0",
 218                 .nr_chips       = 1,
 219                 .nr_map         = chip0_map,
 220                 .nr_partitions  = ARRAY_SIZE(osiris_default_nand_part),
 221                 .partitions     = osiris_default_nand_part,
 222         },
 223         [2] = {
 224                 .name           = "chip1",
 225                 .nr_chips       = 1,
 226                 .nr_map         = chip1_map,
 227                 .options        = NAND_SCAN_SILENT_NODEV,
 228                 .nr_partitions  = ARRAY_SIZE(osiris_default_nand_part),
 229                 .partitions     = osiris_default_nand_part,
 230         },
 231 };
 232
 233 static void osiris_nand_select(struct s3c2410_nand_set *set, int slot)
 234 {
 235         unsigned int tmp;
 236
 237         slot = set->nr_map[slot] & 3;
 238
 239         pr_debug("osiris_nand: selecting slot %d (set %p,%p)\n",
 240                  slot, set, set->nr_map);
 241
 242         tmp = __raw_readb(OSIRIS_VA_CTRL0);
 243         tmp &= ~OSIRIS_CTRL0_NANDSEL;
 244         tmp |= slot;
 245
 246         pr_debug("osiris_nand: ctrl0 now %02x\n", tmp);
 247
 248         __raw_writeb(tmp, OSIRIS_VA_CTRL0);
 249 }
 250
 251 static struct s3c2410_platform_nand __initdata osiris_nand_info = {
 252         .tacls          = 25,
 253         .twrph0         = 60,
 254         .twrph1         = 60,
 255         .nr_sets        = ARRAY_SIZE(osiris_nand_sets),
 256         .sets           = osiris_nand_sets,
 257         .select_chip    = osiris_nand_select,
 258 };
 259
 260 /* PCMCIA control and configuration */
 261
 262 static struct resource osiris_pcmcia_resource[] = {
 263         [0] = {
 264                 .start  = 0x0f000000,
 265                 .end    = 0x0f100000,
 266                 .flags  = IORESOURCE_MEM,
 267         },
 268         [1] = {
 269                 .start  = 0x0c000000,
 270                 .end    = 0x0c100000,
 271                 .flags  = IORESOURCE_MEM,
 272         }
 273 };
 274
 275 static struct platform_device osiris_pcmcia = {
 276         .name           = "osiris-pcmcia",
 277         .id             = -1,
 278         .num_resources  = ARRAY_SIZE(osiris_pcmcia_resource),
 279         .resource       = osiris_pcmcia_resource,
 280 };
 281
 282 /* Osiris power management device */
 283
 284 #ifdef CONFIG_PM
 285 static unsigned char pm_osiris_ctrl0;
 286
 287 static int osiris_pm_suspend(struct sys_device *sd, pm_message_t state)
 288 {
 289         unsigned int tmp;
 290
 291         pm_osiris_ctrl0 = __raw_readb(OSIRIS_VA_CTRL0);
 292         tmp = pm_osiris_ctrl0 & ~OSIRIS_CTRL0_NANDSEL;
 293
 294         /* ensure correct NAND slot is selected on resume */
 295         if ((pm_osiris_ctrl0 & OSIRIS_CTRL0_BOOT_INT) == 0)
 296                 tmp |= 2;
 297
 298         __raw_writeb(tmp, OSIRIS_VA_CTRL0);
 299
 300         /* ensure that an nRESET is not generated on resume. */
 301         s3c2410_gpio_setpin(S3C2410_GPA(21), 1);
 302         s3c_gpio_cfgpin(S3C2410_GPA(21), S3C2410_GPIO_OUTPUT);
 303
 304         return 0;
 305 }
 306
 307 static int osiris_pm_resume(struct sys_device *sd)
 308 {
 309         if (pm_osiris_ctrl0 & OSIRIS_CTRL0_FIX8)
 310                 __raw_writeb(OSIRIS_CTRL1_FIX8, OSIRIS_VA_CTRL1);
 311
 312         __raw_writeb(pm_osiris_ctrl0, OSIRIS_VA_CTRL0);
 313
 314         s3c_gpio_cfgpin(S3C2410_GPA(21), S3C2410_GPA21_nRSTOUT);
 315
 316         return 0;
 317 }
 318
 319 #else
 320 #define osiris_pm_suspend NULL
 321 #define osiris_pm_resume NULL
 322 #endif
 323
 324 static struct sysdev_class osiris_pm_sysclass = {
 325         .name           = "mach-osiris",
 326         .suspend        = osiris_pm_suspend,
 327         .resume         = osiris_pm_resume,
 328 };
 329
 330 static struct sys_device osiris_pm_sysdev = {
 331         .cls            = &osiris_pm_sysclass,
 332 };
 333
 334 /* Link for DVS driver to TPS65011 */
 335
 336 static void osiris_tps_release(struct device *dev)
 337 {
 338         /* static device, do not need to release anything */
 339 }
 340
 341 static struct platform_device osiris_tps_device = {
 342         .name   = "osiris-dvs",
 343         .id     = -1,
 344         .dev.release = osiris_tps_release,
 345 };
 346
 347 static int osiris_tps_setup(struct i2c_client *client, void *context)
 348 {
 349         osiris_tps_device.dev.parent = &client->dev;
 350         return platform_device_register(&osiris_tps_device);
 351 }
 352
 353 static int osiris_tps_remove(struct i2c_client *client, void *context)
 354 {
 355         platform_device_unregister(&osiris_tps_device);
 356         return 0;
 357 }
 358
 359 static struct tps65010_board osiris_tps_board = {
 360         .base           = -1,   /* GPIO can go anywhere at the moment */
 361         .setup          = osiris_tps_setup,
 362         .teardown       = osiris_tps_remove,
 363 };
 364
 365 /* I2C devices fitted. */
 366
 367 static struct i2c_board_info osiris_i2c_devs[] __initdata = {
 368         {
 369                 I2C_BOARD_INFO("tps65011", 0x48),
 370                 .irq    = IRQ_EINT20,
 371                 .platform_data = &osiris_tps_board,
 372         },
 373 };
 374
 375 /* Standard Osiris devices */
 376
 377 static struct platform_device *osiris_devices[] __initdata = {
 378         &s3c_device_i2c0,
 379         &s3c_device_wdt,
 380         &s3c_device_nand,
 381         &osiris_pcmcia,
 382 };
 383
 384 static struct clk *osiris_clocks[] __initdata = {
 385         &s3c24xx_dclk0,
 386         &s3c24xx_dclk1,
 387         &s3c24xx_clkout0,
 388         &s3c24xx_clkout1,
 389         &s3c24xx_uclk,
 390 };
 391
 392 static struct s3c_cpufreq_board __initdata osiris_cpufreq = {
 393         .refresh        = 7800, /* refresh period is 7.8usec */
 394         .auto_io        = 1,
 395         .need_io        = 1,
 396 };
 397
 398 static void __init osiris_map_io(void)
 399 {
 400         unsigned long flags;
 401
 402         /* initialise the clocks */
 403
 404         s3c24xx_dclk0.parent = &clk_upll;
 405         s3c24xx_dclk0.rate   = 12*1000*1000;
 406
 407         s3c24xx_dclk1.parent = &clk_upll;
 408         s3c24xx_dclk1.rate   = 24*1000*1000;
 409
 410         s3c24xx_clkout0.parent  = &s3c24xx_dclk0;
 411         s3c24xx_clkout1.parent  = &s3c24xx_dclk1;
 412
 413         s3c24xx_uclk.parent  = &s3c24xx_clkout1;
 414
 415         s3c24xx_register_clocks(osiris_clocks, ARRAY_SIZE(osiris_clocks));
 416
 417         s3c24xx_init_io(osiris_iodesc, ARRAY_SIZE(osiris_iodesc));
 418         s3c24xx_init_clocks(0);
 419         s3c24xx_init_uarts(osiris_uartcfgs, ARRAY_SIZE(osiris_uartcfgs));
 420
 421         /* check for the newer revision boards with large page nand */
 422
 423         if ((__raw_readb(OSIRIS_VA_IDREG) & OSIRIS_ID_REVMASK) >= 4) {
 424                 printk(KERN_INFO "OSIRIS-B detected (revision %d)\n",
 425                        __raw_readb(OSIRIS_VA_IDREG) & OSIRIS_ID_REVMASK);
 426                 osiris_nand_sets[0].partitions = osiris_default_nand_part_large;
 427                 osiris_nand_sets[0].nr_partitions = ARRAY_SIZE(osiris_default_nand_part_large);
 428         } else {
 429                 /* write-protect line to the NAND */
 430                 s3c2410_gpio_setpin(S3C2410_GPA(0), 1);
 431         }
 432
 433         /* fix bus configuration (nBE settings wrong on ABLE pre v2.20) */
 434
 435         local_irq_save(flags);
 436         __raw_writel(__raw_readl(S3C2410_BWSCON) | S3C2410_BWSCON_ST1 | S3C2410_BWSCON_ST2 | S3C2410_BWSCON_ST3 | S3C2410_BWSCON_ST4 | S3C2410_BWSCON_ST5, S3C2410_BWSCON);
 437         local_irq_restore(flags);
 438 }
 439
 440 static void __init osiris_init(void)
 441 {
 442         sysdev_class_register(&osiris_pm_sysclass);
 443         sysdev_register(&osiris_pm_sysdev);
 444
 445         s3c_i2c0_set_platdata(NULL);
 446         s3c_nand_set_platdata(&osiris_nand_info);
 447
 448         s3c_cpufreq_setboard(&osiris_cpufreq);
 449
 450         i2c_register_board_info(0, osiris_i2c_devs,
 451                                 ARRAY_SIZE(osiris_i2c_devs));
 452
 453         platform_add_devices(osiris_devices, ARRAY_SIZE(osiris_devices));
 454 };
 455
 456 MACHINE_START(OSIRIS, "Simtec-OSIRIS")
 457         /* Maintainer: Ben Dooks <ben@simtec.co.uk> */
 458         .boot_params    = S3C2410_SDRAM_PA + 0x100,
 459         .map_io         = osiris_map_io,
 460         .init_irq       = s3c24xx_init_irq,
 461         .init_machine   = osiris_init,
 462         .timer          = &s3c24xx_timer,
 463 MACHINE_END