drivers/platform/x86/intel_mid_thermal.c

   1 /*
   2  * intel_mid_thermal.c - Intel MID platform thermal driver
   3  *
   4  * Copyright (C) 2011 Intel Corporation
   5  *
   6  * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
   7  *
   8  * This program is free software; you can redistribute it and/or modify
   9  * it under the terms of the GNU General Public License as published by
  10  * the Free Software Foundation; version 2 of the License.
  11  *
  12  * This program is distributed in the hope that it will be useful, but
  13  * WITHOUT ANY WARRANTY; without even the implied warranty of
  14  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.        See the GNU
  15  * General Public License for more details.
  16  *
  17  * You should have received a copy of the GNU General Public License along
  18  * with this program; if not, write to the Free Software Foundation, Inc.,
  19  * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
  20  *
  21  * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  22  * Author: Durgadoss R <durgadoss.r@intel.com>
  23  */
  24
  25 #define pr_fmt(fmt) "intel_mid_thermal: " fmt
  26
  27 #include <linux/module.h>
  28 #include <linux/init.h>
  29 #include <linux/err.h>
  30 #include <linux/param.h>
  31 #include <linux/device.h>
  32 #include <linux/platform_device.h>
  33 #include <linux/slab.h>
  34 #include <linux/pm.h>
  35 #include <linux/thermal.h>
  36
  37 #include <asm/intel_scu_ipc.h>
  38
  39 /* Number of thermal sensors */
  40 #define MSIC_THERMAL_SENSORS    4
  41
  42 /* ADC1 - thermal registers */
  43 #define MSIC_THERM_ADC1CNTL1    0x1C0
  44 #define MSIC_ADC_ENBL           0x10
  45 #define MSIC_ADC_START          0x08
  46
  47 #define MSIC_THERM_ADC1CNTL3    0x1C2
  48 #define MSIC_ADCTHERM_ENBL      0x04
  49 #define MSIC_ADCRRDATA_ENBL     0x05
  50 #define MSIC_CHANL_MASK_VAL     0x0F
  51
  52 #define MSIC_STOPBIT_MASK       16
  53 #define MSIC_ADCTHERM_MASK      4
  54 /* Number of ADC channels */
  55 #define ADC_CHANLS_MAX          15
  56 #define ADC_LOOP_MAX            (ADC_CHANLS_MAX - MSIC_THERMAL_SENSORS)
  57
  58 /* ADC channel code values */
  59 #define SKIN_SENSOR0_CODE       0x08
  60 #define SKIN_SENSOR1_CODE       0x09
  61 #define SYS_SENSOR_CODE         0x0A
  62 #define MSIC_DIE_SENSOR_CODE    0x03
  63
  64 #define SKIN_THERM_SENSOR0      0
  65 #define SKIN_THERM_SENSOR1      1
  66 #define SYS_THERM_SENSOR2       2
  67 #define MSIC_DIE_THERM_SENSOR3  3
  68
  69 /* ADC code range */
  70 #define ADC_MAX                 977
  71 #define ADC_MIN                 162
  72 #define ADC_VAL0C               887
  73 #define ADC_VAL20C              720
  74 #define ADC_VAL40C              508
  75 #define ADC_VAL60C              315
  76
  77 /* ADC base addresses */
  78 #define ADC_CHNL_START_ADDR     0x1C5   /* increments by 1 */
  79 #define ADC_DATA_START_ADDR     0x1D4   /* increments by 2 */
  80
  81 /* MSIC die attributes */
  82 #define MSIC_DIE_ADC_MIN        488
  83 #define MSIC_DIE_ADC_MAX        1004
  84
  85 /* This holds the address of the first free ADC channel,
  86  * among the 15 channels
  87  */
  88 static int channel_index;
  89
  90 struct platform_info {
  91         struct platform_device *pdev;
  92         struct thermal_zone_device *tzd[MSIC_THERMAL_SENSORS];
  93 };
  94
  95 struct thermal_device_info {
  96         unsigned int chnl_addr;
  97         int direct;
  98         /* This holds the current temperature in millidegree celsius */
  99         long curr_temp;
 100 };
 101
 102 /**
 103  * to_msic_die_temp - converts adc_val to msic_die temperature
 104  * @adc_val: ADC value to be converted
 105  *
 106  * Can sleep
 107  */
 108 static int to_msic_die_temp(uint16_t adc_val)
 109 {
 110         return (368 * (adc_val) / 1000) - 220;
 111 }
 112
 113 /**
 114  * is_valid_adc - checks whether the adc code is within the defined range
 115  * @min: minimum value for the sensor
 116  * @max: maximum value for the sensor
 117  *
 118  * Can sleep
 119  */
 120 static int is_valid_adc(uint16_t adc_val, uint16_t min, uint16_t max)
 121 {
 122         return (adc_val >= min) && (adc_val <= max);
 123 }
 124
 125 /**
 126  * adc_to_temp - converts the ADC code to temperature in C
 127  * @direct: true if ths channel is direct index
 128  * @adc_val: the adc_val that needs to be converted
 129  * @tp: temperature return value
 130  *
 131  * Linear approximation is used to covert the skin adc value into temperature.
 132  * This technique is used to avoid very long look-up table to get
 133  * the appropriate temp value from ADC value.
 134  * The adc code vs sensor temp curve is split into five parts
 135  * to achieve very close approximate temp value with less than
 136  * 0.5C error
 137  */
 138 static int adc_to_temp(int direct, uint16_t adc_val, unsigned long *tp)
 139 {
 140         int temp;
 141
 142         /* Direct conversion for die temperature */
 143         if (direct) {
 144                 if (is_valid_adc(adc_val, MSIC_DIE_ADC_MIN, MSIC_DIE_ADC_MAX)) {
 145                         *tp = to_msic_die_temp(adc_val) * 1000;
 146                         return 0;
 147                 }
 148                 return -ERANGE;
 149         }
 150
 151         if (!is_valid_adc(adc_val, ADC_MIN, ADC_MAX))
 152                 return -ERANGE;
 153
 154         /* Linear approximation for skin temperature */
 155         if (adc_val > ADC_VAL0C)
 156                 temp = 177 - (adc_val/5);
 157         else if ((adc_val <= ADC_VAL0C) && (adc_val > ADC_VAL20C))
 158                 temp = 111 - (adc_val/8);
 159         else if ((adc_val <= ADC_VAL20C) && (adc_val > ADC_VAL40C))
 160                 temp = 92 - (adc_val/10);
 161         else if ((adc_val <= ADC_VAL40C) && (adc_val > ADC_VAL60C))
 162                 temp = 91 - (adc_val/10);
 163         else
 164                 temp = 112 - (adc_val/6);
 165
 166         /* Convert temperature in celsius to milli degree celsius */
 167         *tp = temp * 1000;
 168         return 0;
 169 }
 170
 171 /**
 172  * mid_read_temp - read sensors for temperature
 173  * @temp: holds the current temperature for the sensor after reading
 174  *
 175  * reads the adc_code from the channel and converts it to real
 176  * temperature. The converted value is stored in temp.
 177  *
 178  * Can sleep
 179  */
 180 static int mid_read_temp(struct thermal_zone_device *tzd, unsigned long *temp)
 181 {
 182         struct thermal_device_info *td_info = tzd->devdata;
 183         uint16_t adc_val, addr;
 184         uint8_t data = 0;
 185         int ret;
 186         unsigned long curr_temp;
 187
 188
 189         addr = td_info->chnl_addr;
 190
 191         /* Enable the msic for conversion before reading */
 192         ret = intel_scu_ipc_iowrite8(MSIC_THERM_ADC1CNTL3, MSIC_ADCRRDATA_ENBL);
 193         if (ret)
 194                 return ret;
 195
 196         /* Re-toggle the RRDATARD bit (temporary workaround) */
 197         ret = intel_scu_ipc_iowrite8(MSIC_THERM_ADC1CNTL3, MSIC_ADCTHERM_ENBL);
 198         if (ret)
 199                 return ret;
 200
 201         /* Read the higher bits of data */
 202         ret = intel_scu_ipc_ioread8(addr, &data);
 203         if (ret)
 204                 return ret;
 205
 206         /* Shift bits to accommodate the lower two data bits */
 207         adc_val = (data << 2);
 208         addr++;
 209
 210         ret = intel_scu_ipc_ioread8(addr, &data);/* Read lower bits */
 211         if (ret)
 212                 return ret;
 213
 214         /* Adding lower two bits to the higher bits */
 215         data &= 03;
 216         adc_val += data;
 217
 218         /* Convert ADC value to temperature */
 219         ret = adc_to_temp(td_info->direct, adc_val, &curr_temp);
 220         if (ret == 0)
 221                 *temp = td_info->curr_temp = curr_temp;
 222         return ret;
 223 }
 224
 225 /**
 226  * configure_adc - enables/disables the ADC for conversion
 227  * @val: zero: disables the ADC non-zero:enables the ADC
 228  *
 229  * Enable/Disable the ADC depending on the argument
 230  *
 231  * Can sleep
 232  */
 233 static int configure_adc(int val)
 234 {
 235         int ret;
 236         uint8_t data;
 237
 238         ret = intel_scu_ipc_ioread8(MSIC_THERM_ADC1CNTL1, &data);
 239         if (ret)
 240                 return ret;
 241
 242         if (val) {
 243                 /* Enable and start the ADC */
 244                 data |= (MSIC_ADC_ENBL | MSIC_ADC_START);
 245         } else {
 246                 /* Just stop the ADC */
 247                 data &= (~MSIC_ADC_START);
 248         }
 249         return intel_scu_ipc_iowrite8(MSIC_THERM_ADC1CNTL1, data);
 250 }
 251
 252 /**
 253  * set_up_therm_channel - enable thermal channel for conversion
 254  * @base_addr: index of free msic ADC channel
 255  *
 256  * Enable all the three channels for conversion
 257  *
 258  * Can sleep
 259  */
 260 static int set_up_therm_channel(u16 base_addr)
 261 {
 262         int ret;
 263
 264         /* Enable all the sensor channels */
 265         ret = intel_scu_ipc_iowrite8(base_addr, SKIN_SENSOR0_CODE);
 266         if (ret)
 267                 return ret;
 268
 269         ret = intel_scu_ipc_iowrite8(base_addr + 1, SKIN_SENSOR1_CODE);
 270         if (ret)
 271                 return ret;
 272
 273         ret = intel_scu_ipc_iowrite8(base_addr + 2, SYS_SENSOR_CODE);
 274         if (ret)
 275                 return ret;
 276
 277         /* Since this is the last channel, set the stop bit
 278          * to 1 by ORing the DIE_SENSOR_CODE with 0x10 */
 279         ret = intel_scu_ipc_iowrite8(base_addr + 3,
 280                         (MSIC_DIE_SENSOR_CODE | 0x10));
 281         if (ret)
 282                 return ret;
 283
 284         /* Enable ADC and start it */
 285         return configure_adc(1);
 286 }
 287
 288 /**
 289  * reset_stopbit - sets the stop bit to 0 on the given channel
 290  * @addr: address of the channel
 291  *
 292  * Can sleep
 293  */
 294 static int reset_stopbit(uint16_t addr)
 295 {
 296         int ret;
 297         uint8_t data;
 298         ret = intel_scu_ipc_ioread8(addr, &data);
 299         if (ret)
 300                 return ret;
 301         /* Set the stop bit to zero */
 302         return intel_scu_ipc_iowrite8(addr, (data & 0xEF));
 303 }
 304
 305 /**
 306  * find_free_channel - finds an empty channel for conversion
 307  *
 308  * If the ADC is not enabled then start using 0th channel
 309  * itself. Otherwise find an empty channel by looking for a
 310  * channel in which the stopbit is set to 1. returns the index
 311  * of the first free channel if succeeds or an error code.
 312  *
 313  * Context: can sleep
 314  *
 315  * FIXME: Ultimately the channel allocator will move into the intel_scu_ipc
 316  * code.
 317  */
 318 static int find_free_channel(void)
 319 {
 320         int ret;
 321         int i;
 322         uint8_t data;
 323
 324         /* check whether ADC is enabled */
 325         ret = intel_scu_ipc_ioread8(MSIC_THERM_ADC1CNTL1, &data);
 326         if (ret)
 327                 return ret;
 328
 329         if ((data & MSIC_ADC_ENBL) == 0)
 330                 return 0;
 331
 332         /* ADC is already enabled; Looking for an empty channel */
 333         for (i = 0; i < ADC_CHANLS_MAX; i++) {
 334                 ret = intel_scu_ipc_ioread8(ADC_CHNL_START_ADDR + i, &data);
 335                 if (ret)
 336                         return ret;
 337
 338                 if (data & MSIC_STOPBIT_MASK) {
 339                         ret = i;
 340                         break;
 341                 }
 342         }
 343         return (ret > ADC_LOOP_MAX) ? (-EINVAL) : ret;
 344 }
 345
 346 /**
 347  * mid_initialize_adc - initializing the ADC
 348  * @dev: our device structure
 349  *
 350  * Initialize the ADC for reading thermistor values. Can sleep.
 351  */
 352 static int mid_initialize_adc(struct device *dev)
 353 {
 354         u8  data;
 355         u16 base_addr;
 356         int ret;
 357
 358         /*
 359          * Ensure that adctherm is disabled before we
 360          * initialize the ADC
 361          */
 362         ret = intel_scu_ipc_ioread8(MSIC_THERM_ADC1CNTL3, &data);
 363         if (ret)
 364                 return ret;
 365
 366         if (data & MSIC_ADCTHERM_MASK)
 367                 dev_warn(dev, "ADCTHERM already set");
 368
 369         /* Index of the first channel in which the stop bit is set */
 370         channel_index = find_free_channel();
 371         if (channel_index < 0) {
 372                 dev_err(dev, "No free ADC channels");
 373                 return channel_index;
 374         }
 375
 376         base_addr = ADC_CHNL_START_ADDR + channel_index;
 377
 378         if (!(channel_index == 0 || channel_index == ADC_LOOP_MAX)) {
 379                 /* Reset stop bit for channels other than 0 and 12 */
 380                 ret = reset_stopbit(base_addr);
 381                 if (ret)
 382                         return ret;
 383
 384                 /* Index of the first free channel */
 385                 base_addr++;
 386                 channel_index++;
 387         }
 388
 389         ret = set_up_therm_channel(base_addr);
 390         if (ret) {
 391                 dev_err(dev, "unable to enable ADC");
 392                 return ret;
 393         }
 394         dev_dbg(dev, "ADC initialization successful");
 395         return ret;
 396 }
 397
 398 /**
 399  * initialize_sensor - sets default temp and timer ranges
 400  * @index: index of the sensor
 401  *
 402  * Context: can sleep
 403  */
 404 static struct thermal_device_info *initialize_sensor(int index)
 405 {
 406         struct thermal_device_info *td_info =
 407                 kzalloc(sizeof(struct thermal_device_info), GFP_KERNEL);
 408
 409         if (!td_info)
 410                 return NULL;
 411
 412         /* Set the base addr of the channel for this sensor */
 413         td_info->chnl_addr = ADC_DATA_START_ADDR + 2 * (channel_index + index);
 414         /* Sensor 3 is direct conversion */
 415         if (index == 3)
 416                 td_info->direct = 1;
 417         return td_info;
 418 }
 419
 420 /**
 421  * mid_thermal_resume - resume routine
 422  * @pdev: platform device structure
 423  *
 424  * mid thermal resume: re-initializes the adc. Can sleep.
 425  */
 426 static int mid_thermal_resume(struct platform_device *pdev)
 427 {
 428         return mid_initialize_adc(&pdev->dev);
 429 }
 430
 431 /**
 432  * mid_thermal_suspend - suspend routine
 433  * @pdev: platform device structure
 434  *
 435  * mid thermal suspend implements the suspend functionality
 436  * by stopping the ADC. Can sleep.
 437  */
 438 static int mid_thermal_suspend(struct platform_device *pdev, pm_message_t mesg)
 439 {
 440         /*
 441          * This just stops the ADC and does not disable it.
 442          * temporary workaround until we have a generic ADC driver.
 443          * If 0 is passed, it disables the ADC.
 444          */
 445         return configure_adc(0);
 446 }
 447
 448 /**
 449  * read_curr_temp - reads the current temperature and stores in temp
 450  * @temp: holds the current temperature value after reading
 451  *
 452  * Can sleep
 453  */
 454 static int read_curr_temp(struct thermal_zone_device *tzd, unsigned long *temp)
 455 {
 456         WARN_ON(tzd == NULL);
 457         return mid_read_temp(tzd, temp);
 458 }
 459
 460 /* Can't be const */
 461 static struct thermal_zone_device_ops tzd_ops = {
 462         .get_temp = read_curr_temp,
 463 };
 464
 465 /**
 466  * mid_thermal_probe - mfld thermal initialize
 467  * @pdev: platform device structure
 468  *
 469  * mid thermal probe initializes the hardware and registers
 470  * all the sensors with the generic thermal framework. Can sleep.
 471  */
 472 static int mid_thermal_probe(struct platform_device *pdev)
 473 {
 474         static char *name[MSIC_THERMAL_SENSORS] = {
 475                 "skin0", "skin1", "sys", "msicdie"
 476         };
 477
 478         int ret;
 479         int i;
 480         struct platform_info *pinfo;
 481
 482         pinfo = kzalloc(sizeof(struct platform_info), GFP_KERNEL);
 483         if (!pinfo)
 484                 return -ENOMEM;
 485
 486         /* Initializing the hardware */
 487         ret = mid_initialize_adc(&pdev->dev);
 488         if (ret) {
 489                 dev_err(&pdev->dev, "ADC init failed");
 490                 kfree(pinfo);
 491                 return ret;
 492         }
 493
 494         /* Register each sensor with the generic thermal framework*/
 495         for (i = 0; i < MSIC_THERMAL_SENSORS; i++) {
 496                 pinfo->tzd[i] = thermal_zone_device_register(name[i],
 497                                 0, initialize_sensor(i), &tzd_ops, 0, 0, 0, 0);
 498                 if (IS_ERR(pinfo->tzd[i]))
 499                         goto reg_fail;
 500         }
 501
 502         pinfo->pdev = pdev;
 503         platform_set_drvdata(pdev, pinfo);
 504         return 0;
 505
 506 reg_fail:
 507         ret = PTR_ERR(pinfo->tzd[i]);
 508         while (--i >= 0)
 509                 thermal_zone_device_unregister(pinfo->tzd[i]);
 510         configure_adc(0);
 511         kfree(pinfo);
 512         return ret;
 513 }
 514
 515 /**
 516  * mid_thermal_remove - mfld thermal finalize
 517  * @dev: platform device structure
 518  *
 519  * MLFD thermal remove unregisters all the sensors from the generic
 520  * thermal framework. Can sleep.
 521  */
 522 static int mid_thermal_remove(struct platform_device *pdev)
 523 {
 524         int i;
 525         struct platform_info *pinfo = platform_get_drvdata(pdev);
 526
 527         for (i = 0; i < MSIC_THERMAL_SENSORS; i++)
 528                 thermal_zone_device_unregister(pinfo->tzd[i]);
 529
 530         kfree(pinfo);
 531         platform_set_drvdata(pdev, NULL);
 532
 533         /* Stop the ADC */
 534         return configure_adc(0);
 535 }
 536
 537 #define DRIVER_NAME "msic_sensor"
 538
 539 static const struct platform_device_id therm_id_table[] = {
 540         { DRIVER_NAME, 1 },
 541         { }
 542 };
 543
 544 static struct platform_driver mid_thermal_driver = {
 545         .driver = {
 546                 .name = DRIVER_NAME,
 547                 .owner = THIS_MODULE,
 548         },
 549         .probe = mid_thermal_probe,
 550         .suspend = mid_thermal_suspend,
 551         .resume = mid_thermal_resume,
 552         .remove = __devexit_p(mid_thermal_remove),
 553         .id_table = therm_id_table,
 554 };
 555
 556 static int __init mid_thermal_module_init(void)
 557 {
 558         return platform_driver_register(&mid_thermal_driver);
 559 }
 560
 561 static void __exit mid_thermal_module_exit(void)
 562 {
 563         platform_driver_unregister(&mid_thermal_driver);
 564 }
 565
 566 module_init(mid_thermal_module_init);
 567 module_exit(mid_thermal_module_exit);
 568
 569 MODULE_AUTHOR("Durgadoss R <durgadoss.r@intel.com>");
 570 MODULE_DESCRIPTION("Intel Medfield Platform Thermal Driver");
 571 MODULE_LICENSE("GPL");