?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
switch sysfs to ->evict_inode()
[linux-2.6/linux-acpi-2.6/ibm-acpi-2.6.git] / drivers / net / sky2.c
blob7985165e84fc4ed6ca6ce5fceb8e60d54dca0b5d
1 /*
2 * New driver for Marvell Yukon 2 chipset.
3 * Based on earlier sk98lin, and skge driver.
4 *
5 * This driver intentionally does not support all the features
6 * of the original driver such as link fail-over and link management because
7 * those should be done at higher levels.
8 *
9 * Copyright (C) 2005 Stephen Hemminger <shemminger@osdl.org>
10 *
11 * This program is free software; you can redistribute it and/or modify
12 * it under the terms of the GNU General Public License as published by
13 * the Free Software Foundation; either version 2 of the License.
14 *
15 * This program is distributed in the hope that it will be useful,
16 * but WITHOUT ANY WARRANTY; without even the implied warranty of
17 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
18 * GNU General Public License for more details.
19 *
20 * You should have received a copy of the GNU General Public License
21 * along with this program; if not, write to the Free Software
22 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
23 */
24
25 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
26
27 #include <linux/crc32.h>
28 #include <linux/kernel.h>
29 #include <linux/module.h>
30 #include <linux/netdevice.h>
31 #include <linux/dma-mapping.h>
32 #include <linux/etherdevice.h>
33 #include <linux/ethtool.h>
34 #include <linux/pci.h>
35 #include <linux/ip.h>
36 #include <linux/slab.h>
37 #include <net/ip.h>
38 #include <linux/tcp.h>
39 #include <linux/in.h>
40 #include <linux/delay.h>
41 #include <linux/workqueue.h>
42 #include <linux/if_vlan.h>
43 #include <linux/prefetch.h>
44 #include <linux/debugfs.h>
45 #include <linux/mii.h>
46
47 #include <asm/irq.h>
48
49 #if defined(CONFIG_VLAN_8021Q) || defined(CONFIG_VLAN_8021Q_MODULE)
50 #define SKY2_VLAN_TAG_USED 1
51 #endif
52
53 #include "sky2.h"
54
55 #define DRV_NAME "sky2"
56 #define DRV_VERSION "1.28"
57
58 /*
59 * The Yukon II chipset takes 64 bit command blocks (called list elements)
60 * that are organized into three (receive, transmit, status) different rings
61 * similar to Tigon3.
62 */
63
64 #define RX_LE_SIZE 1024
65 #define RX_LE_BYTES (RX_LE_SIZE*sizeof(struct sky2_rx_le))
66 #define RX_MAX_PENDING (RX_LE_SIZE/6 - 2)
67 #define RX_DEF_PENDING RX_MAX_PENDING
68
69 /* This is the worst case number of transmit list elements for a single skb:
70 VLAN:GSO + CKSUM + Data + skb_frags * DMA */
71 #define MAX_SKB_TX_LE (2 + (sizeof(dma_addr_t)/sizeof(u32))*(MAX_SKB_FRAGS+1))
72 #define TX_MIN_PENDING (MAX_SKB_TX_LE+1)
73 #define TX_MAX_PENDING 1024
74 #define TX_DEF_PENDING 127
75
76 #define TX_WATCHDOG (5 * HZ)
77 #define NAPI_WEIGHT 64
78 #define PHY_RETRIES 1000
79
80 #define SKY2_EEPROM_MAGIC 0x9955aabb
81
82 #define RING_NEXT(x,s) (((x)+1) & ((s)-1))
83
84 static const u32 default_msg =
85 NETIF_MSG_DRV | NETIF_MSG_PROBE | NETIF_MSG_LINK
86 | NETIF_MSG_TIMER | NETIF_MSG_TX_ERR | NETIF_MSG_RX_ERR
87 | NETIF_MSG_IFUP | NETIF_MSG_IFDOWN;
88
89 static int debug = -1; /* defaults above */
90 module_param(debug, int, 0);
91 MODULE_PARM_DESC(debug, "Debug level (0=none,...,16=all)");
92
93 static int copybreak __read_mostly = 128;
94 module_param(copybreak, int, 0);
95 MODULE_PARM_DESC(copybreak, "Receive copy threshold");
96
97 static int disable_msi = 0;
98 module_param(disable_msi, int, 0);
99 MODULE_PARM_DESC(disable_msi, "Disable Message Signaled Interrupt (MSI)");
100
101 static DEFINE_PCI_DEVICE_TABLE(sky2_id_table) = {
102 { PCI_DEVICE(PCI_VENDOR_ID_SYSKONNECT, 0x9000) }, /* SK-9Sxx */
103 { PCI_DEVICE(PCI_VENDOR_ID_SYSKONNECT, 0x9E00) }, /* SK-9Exx */
104 { PCI_DEVICE(PCI_VENDOR_ID_SYSKONNECT, 0x9E01) }, /* SK-9E21M */
105 { PCI_DEVICE(PCI_VENDOR_ID_DLINK, 0x4b00) }, /* DGE-560T */
106 { PCI_DEVICE(PCI_VENDOR_ID_DLINK, 0x4001) }, /* DGE-550SX */
107 { PCI_DEVICE(PCI_VENDOR_ID_DLINK, 0x4B02) }, /* DGE-560SX */
108 { PCI_DEVICE(PCI_VENDOR_ID_DLINK, 0x4B03) }, /* DGE-550T */
109 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4340) }, /* 88E8021 */
110 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4341) }, /* 88E8022 */
111 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4342) }, /* 88E8061 */
112 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4343) }, /* 88E8062 */
113 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4344) }, /* 88E8021 */
114 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4345) }, /* 88E8022 */
115 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4346) }, /* 88E8061 */
116 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4347) }, /* 88E8062 */
117 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4350) }, /* 88E8035 */
118 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4351) }, /* 88E8036 */
119 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4352) }, /* 88E8038 */
120 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4353) }, /* 88E8039 */
121 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4354) }, /* 88E8040 */
122 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4355) }, /* 88E8040T */
123 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4356) }, /* 88EC033 */
124 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4357) }, /* 88E8042 */
125 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x435A) }, /* 88E8048 */
126 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4360) }, /* 88E8052 */
127 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4361) }, /* 88E8050 */
128 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4362) }, /* 88E8053 */
129 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4363) }, /* 88E8055 */
130 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4364) }, /* 88E8056 */
131 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4365) }, /* 88E8070 */
132 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4366) }, /* 88EC036 */
133 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4367) }, /* 88EC032 */
134 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4368) }, /* 88EC034 */
135 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4369) }, /* 88EC042 */
136 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x436A) }, /* 88E8058 */
137 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x436B) }, /* 88E8071 */
138 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x436C) }, /* 88E8072 */
139 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x436D) }, /* 88E8055 */
140 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4370) }, /* 88E8075 */
141 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4380) }, /* 88E8057 */
142 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4381) }, /* 88E8059 */
143 { 0 }
144 };
145
146 MODULE_DEVICE_TABLE(pci, sky2_id_table);
147
148 /* Avoid conditionals by using array */
149 static const unsigned txqaddr[] = { Q_XA1, Q_XA2 };
150 static const unsigned rxqaddr[] = { Q_R1, Q_R2 };
151 static const u32 portirq_msk[] = { Y2_IS_PORT_1, Y2_IS_PORT_2 };
152
153 static void sky2_set_multicast(struct net_device *dev);
154
155 /* Access to PHY via serial interconnect */
156 static int gm_phy_write(struct sky2_hw *hw, unsigned port, u16 reg, u16 val)
157 {
158 int i;
159
160 gma_write16(hw, port, GM_SMI_DATA, val);
161 gma_write16(hw, port, GM_SMI_CTRL,
162 GM_SMI_CT_PHY_AD(PHY_ADDR_MARV) | GM_SMI_CT_REG_AD(reg));
163
164 for (i = 0; i < PHY_RETRIES; i++) {
165 u16 ctrl = gma_read16(hw, port, GM_SMI_CTRL);
166 if (ctrl == 0xffff)
167 goto io_error;
168
169 if (!(ctrl & GM_SMI_CT_BUSY))
170 return 0;
171
172 udelay(10);
173 }
174
175 dev_warn(&hw->pdev->dev,"%s: phy write timeout\n", hw->dev[port]->name);
176 return -ETIMEDOUT;
177
178 io_error:
179 dev_err(&hw->pdev->dev, "%s: phy I/O error\n", hw->dev[port]->name);
180 return -EIO;
181 }
182
183 static int __gm_phy_read(struct sky2_hw *hw, unsigned port, u16 reg, u16 *val)
184 {
185 int i;
186
187 gma_write16(hw, port, GM_SMI_CTRL, GM_SMI_CT_PHY_AD(PHY_ADDR_MARV)
188 | GM_SMI_CT_REG_AD(reg) | GM_SMI_CT_OP_RD);
189
190 for (i = 0; i < PHY_RETRIES; i++) {
191 u16 ctrl = gma_read16(hw, port, GM_SMI_CTRL);
192 if (ctrl == 0xffff)
193 goto io_error;
194
195 if (ctrl & GM_SMI_CT_RD_VAL) {
196 *val = gma_read16(hw, port, GM_SMI_DATA);
197 return 0;
198 }
199
200 udelay(10);
201 }
202
203 dev_warn(&hw->pdev->dev, "%s: phy read timeout\n", hw->dev[port]->name);
204 return -ETIMEDOUT;
205 io_error:
206 dev_err(&hw->pdev->dev, "%s: phy I/O error\n", hw->dev[port]->name);
207 return -EIO;
208 }
209
210 static inline u16 gm_phy_read(struct sky2_hw *hw, unsigned port, u16 reg)
211 {
212 u16 v;
213 __gm_phy_read(hw, port, reg, &v);
214 return v;
215 }
216
217
218 static void sky2_power_on(struct sky2_hw *hw)
219 {
220 /* switch power to VCC (WA for VAUX problem) */
221 sky2_write8(hw, B0_POWER_CTRL,
222 PC_VAUX_ENA | PC_VCC_ENA | PC_VAUX_OFF | PC_VCC_ON);
223
224 /* disable Core Clock Division, */
225 sky2_write32(hw, B2_Y2_CLK_CTRL, Y2_CLK_DIV_DIS);
226
227 if (hw->chip_id == CHIP_ID_YUKON_XL && hw->chip_rev > CHIP_REV_YU_XL_A1)
228 /* enable bits are inverted */
229 sky2_write8(hw, B2_Y2_CLK_GATE,
230 Y2_PCI_CLK_LNK1_DIS | Y2_COR_CLK_LNK1_DIS |
231 Y2_CLK_GAT_LNK1_DIS | Y2_PCI_CLK_LNK2_DIS |
232 Y2_COR_CLK_LNK2_DIS | Y2_CLK_GAT_LNK2_DIS);
233 else
234 sky2_write8(hw, B2_Y2_CLK_GATE, 0);
235
236 if (hw->flags & SKY2_HW_ADV_POWER_CTL) {
237 u32 reg;
238
239 sky2_pci_write32(hw, PCI_DEV_REG3, 0);
240
241 reg = sky2_pci_read32(hw, PCI_DEV_REG4);
242 /* set all bits to 0 except bits 15..12 and 8 */
243 reg &= P_ASPM_CONTROL_MSK;
244 sky2_pci_write32(hw, PCI_DEV_REG4, reg);
245
246 reg = sky2_pci_read32(hw, PCI_DEV_REG5);
247 /* set all bits to 0 except bits 28 & 27 */
248 reg &= P_CTL_TIM_VMAIN_AV_MSK;
249 sky2_pci_write32(hw, PCI_DEV_REG5, reg);
250
251 sky2_pci_write32(hw, PCI_CFG_REG_1, 0);
252
253 sky2_write16(hw, B0_CTST, Y2_HW_WOL_ON);
254
255 /* Enable workaround for dev 4.107 on Yukon-Ultra & Extreme */
256 reg = sky2_read32(hw, B2_GP_IO);
257 reg |= GLB_GPIO_STAT_RACE_DIS;
258 sky2_write32(hw, B2_GP_IO, reg);
259
260 sky2_read32(hw, B2_GP_IO);
261 }
262
263 /* Turn on "driver loaded" LED */
264 sky2_write16(hw, B0_CTST, Y2_LED_STAT_ON);
265 }
266
267 static void sky2_power_aux(struct sky2_hw *hw)
268 {
269 if (hw->chip_id == CHIP_ID_YUKON_XL && hw->chip_rev > CHIP_REV_YU_XL_A1)
270 sky2_write8(hw, B2_Y2_CLK_GATE, 0);
271 else
272 /* enable bits are inverted */
273 sky2_write8(hw, B2_Y2_CLK_GATE,
274 Y2_PCI_CLK_LNK1_DIS | Y2_COR_CLK_LNK1_DIS |
275 Y2_CLK_GAT_LNK1_DIS | Y2_PCI_CLK_LNK2_DIS |
276 Y2_COR_CLK_LNK2_DIS | Y2_CLK_GAT_LNK2_DIS);
277
278 /* switch power to VAUX if supported and PME from D3cold */
279 if ( (sky2_read32(hw, B0_CTST) & Y2_VAUX_AVAIL) &&
280 pci_pme_capable(hw->pdev, PCI_D3cold))
281 sky2_write8(hw, B0_POWER_CTRL,
282 (PC_VAUX_ENA | PC_VCC_ENA |
283 PC_VAUX_ON | PC_VCC_OFF));
284
285 /* turn off "driver loaded LED" */
286 sky2_write16(hw, B0_CTST, Y2_LED_STAT_OFF);
287 }
288
289 static void sky2_gmac_reset(struct sky2_hw *hw, unsigned port)
290 {
291 u16 reg;
292
293 /* disable all GMAC IRQ's */
294 sky2_write8(hw, SK_REG(port, GMAC_IRQ_MSK), 0);
295
296 gma_write16(hw, port, GM_MC_ADDR_H1, 0); /* clear MC hash */
297 gma_write16(hw, port, GM_MC_ADDR_H2, 0);
298 gma_write16(hw, port, GM_MC_ADDR_H3, 0);
299 gma_write16(hw, port, GM_MC_ADDR_H4, 0);
300
301 reg = gma_read16(hw, port, GM_RX_CTRL);
302 reg |= GM_RXCR_UCF_ENA | GM_RXCR_MCF_ENA;
303 gma_write16(hw, port, GM_RX_CTRL, reg);
304 }
305
306 /* flow control to advertise bits */
307 static const u16 copper_fc_adv[] = {
308 [FC_NONE] = 0,
309 [FC_TX] = PHY_M_AN_ASP,
310 [FC_RX] = PHY_M_AN_PC,
311 [FC_BOTH] = PHY_M_AN_PC | PHY_M_AN_ASP,
312 };
313
314 /* flow control to advertise bits when using 1000BaseX */
315 static const u16 fiber_fc_adv[] = {
316 [FC_NONE] = PHY_M_P_NO_PAUSE_X,
317 [FC_TX] = PHY_M_P_ASYM_MD_X,
318 [FC_RX] = PHY_M_P_SYM_MD_X,
319 [FC_BOTH] = PHY_M_P_BOTH_MD_X,
320 };
321
322 /* flow control to GMA disable bits */
323 static const u16 gm_fc_disable[] = {
324 [FC_NONE] = GM_GPCR_FC_RX_DIS | GM_GPCR_FC_TX_DIS,
325 [FC_TX] = GM_GPCR_FC_RX_DIS,
326 [FC_RX] = GM_GPCR_FC_TX_DIS,
327 [FC_BOTH] = 0,
328 };
329
330
331 static void sky2_phy_init(struct sky2_hw *hw, unsigned port)
332 {
333 struct sky2_port *sky2 = netdev_priv(hw->dev[port]);
334 u16 ctrl, ct1000, adv, pg, ledctrl, ledover, reg;
335
336 if ( (sky2->flags & SKY2_FLAG_AUTO_SPEED) &&
337 !(hw->flags & SKY2_HW_NEWER_PHY)) {
338 u16 ectrl = gm_phy_read(hw, port, PHY_MARV_EXT_CTRL);
339
340 ectrl &= ~(PHY_M_EC_M_DSC_MSK | PHY_M_EC_S_DSC_MSK |
341 PHY_M_EC_MAC_S_MSK);
342 ectrl |= PHY_M_EC_MAC_S(MAC_TX_CLK_25_MHZ);
343
344 /* on PHY 88E1040 Rev.D0 (and newer) downshift control changed */
345 if (hw->chip_id == CHIP_ID_YUKON_EC)
346 /* set downshift counter to 3x and enable downshift */
347 ectrl |= PHY_M_EC_DSC_2(2) | PHY_M_EC_DOWN_S_ENA;
348 else
349 /* set master & slave downshift counter to 1x */
350 ectrl |= PHY_M_EC_M_DSC(0) | PHY_M_EC_S_DSC(1);
351
352 gm_phy_write(hw, port, PHY_MARV_EXT_CTRL, ectrl);
353 }
354
355 ctrl = gm_phy_read(hw, port, PHY_MARV_PHY_CTRL);
356 if (sky2_is_copper(hw)) {
357 if (!(hw->flags & SKY2_HW_GIGABIT)) {
358 /* enable automatic crossover */
359 ctrl |= PHY_M_PC_MDI_XMODE(PHY_M_PC_ENA_AUTO) >> 1;
360
361 if (hw->chip_id == CHIP_ID_YUKON_FE_P &&
362 hw->chip_rev == CHIP_REV_YU_FE2_A0) {
363 u16 spec;
364
365 /* Enable Class A driver for FE+ A0 */
366 spec = gm_phy_read(hw, port, PHY_MARV_FE_SPEC_2);
367 spec |= PHY_M_FESC_SEL_CL_A;
368 gm_phy_write(hw, port, PHY_MARV_FE_SPEC_2, spec);
369 }
370 } else {
371 /* disable energy detect */
372 ctrl &= ~PHY_M_PC_EN_DET_MSK;
373
374 /* enable automatic crossover */
375 ctrl |= PHY_M_PC_MDI_XMODE(PHY_M_PC_ENA_AUTO);
376
377 /* downshift on PHY 88E1112 and 88E1149 is changed */
378 if ( (sky2->flags & SKY2_FLAG_AUTO_SPEED) &&
379 (hw->flags & SKY2_HW_NEWER_PHY)) {
380 /* set downshift counter to 3x and enable downshift */
381 ctrl &= ~PHY_M_PC_DSC_MSK;
382 ctrl |= PHY_M_PC_DSC(2) | PHY_M_PC_DOWN_S_ENA;
383 }
384 }
385 } else {
386 /* workaround for deviation #4.88 (CRC errors) */
387 /* disable Automatic Crossover */
388
389 ctrl &= ~PHY_M_PC_MDIX_MSK;
390 }
391
392 gm_phy_write(hw, port, PHY_MARV_PHY_CTRL, ctrl);
393
394 /* special setup for PHY 88E1112 Fiber */
395 if (hw->chip_id == CHIP_ID_YUKON_XL && (hw->flags & SKY2_HW_FIBRE_PHY)) {
396 pg = gm_phy_read(hw, port, PHY_MARV_EXT_ADR);
397
398 /* Fiber: select 1000BASE-X only mode MAC Specific Ctrl Reg. */
399 gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 2);
400 ctrl = gm_phy_read(hw, port, PHY_MARV_PHY_CTRL);
401 ctrl &= ~PHY_M_MAC_MD_MSK;
402 ctrl |= PHY_M_MAC_MODE_SEL(PHY_M_MAC_MD_1000BX);
403 gm_phy_write(hw, port, PHY_MARV_PHY_CTRL, ctrl);
404
405 if (hw->pmd_type == 'P') {
406 /* select page 1 to access Fiber registers */
407 gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 1);
408
409 /* for SFP-module set SIGDET polarity to low */
410 ctrl = gm_phy_read(hw, port, PHY_MARV_PHY_CTRL);
411 ctrl |= PHY_M_FIB_SIGD_POL;
412 gm_phy_write(hw, port, PHY_MARV_PHY_CTRL, ctrl);
413 }
414
415 gm_phy_write(hw, port, PHY_MARV_EXT_ADR, pg);
416 }
417
418 ctrl = PHY_CT_RESET;
419 ct1000 = 0;
420 adv = PHY_AN_CSMA;
421 reg = 0;
422
423 if (sky2->flags & SKY2_FLAG_AUTO_SPEED) {
424 if (sky2_is_copper(hw)) {
425 if (sky2->advertising & ADVERTISED_1000baseT_Full)
426 ct1000 |= PHY_M_1000C_AFD;
427 if (sky2->advertising & ADVERTISED_1000baseT_Half)
428 ct1000 |= PHY_M_1000C_AHD;
429 if (sky2->advertising & ADVERTISED_100baseT_Full)
430 adv |= PHY_M_AN_100_FD;
431 if (sky2->advertising & ADVERTISED_100baseT_Half)
432 adv |= PHY_M_AN_100_HD;
433 if (sky2->advertising & ADVERTISED_10baseT_Full)
434 adv |= PHY_M_AN_10_FD;
435 if (sky2->advertising & ADVERTISED_10baseT_Half)
436 adv |= PHY_M_AN_10_HD;
437
438 } else { /* special defines for FIBER (88E1040S only) */
439 if (sky2->advertising & ADVERTISED_1000baseT_Full)
440 adv |= PHY_M_AN_1000X_AFD;
441 if (sky2->advertising & ADVERTISED_1000baseT_Half)
442 adv |= PHY_M_AN_1000X_AHD;
443 }
444
445 /* Restart Auto-negotiation */
446 ctrl |= PHY_CT_ANE | PHY_CT_RE_CFG;
447 } else {
448 /* forced speed/duplex settings */
449 ct1000 = PHY_M_1000C_MSE;
450
451 /* Disable auto update for duplex flow control and duplex */
452 reg |= GM_GPCR_AU_DUP_DIS | GM_GPCR_AU_SPD_DIS;
453
454 switch (sky2->speed) {
455 case SPEED_1000:
456 ctrl |= PHY_CT_SP1000;
457 reg |= GM_GPCR_SPEED_1000;
458 break;
459 case SPEED_100:
460 ctrl |= PHY_CT_SP100;
461 reg |= GM_GPCR_SPEED_100;
462 break;
463 }
464
465 if (sky2->duplex == DUPLEX_FULL) {
466 reg |= GM_GPCR_DUP_FULL;
467 ctrl |= PHY_CT_DUP_MD;
468 } else if (sky2->speed < SPEED_1000)
469 sky2->flow_mode = FC_NONE;
470 }
471
472 if (sky2->flags & SKY2_FLAG_AUTO_PAUSE) {
473 if (sky2_is_copper(hw))
474 adv |= copper_fc_adv[sky2->flow_mode];
475 else
476 adv |= fiber_fc_adv[sky2->flow_mode];
477 } else {
478 reg |= GM_GPCR_AU_FCT_DIS;
479 reg |= gm_fc_disable[sky2->flow_mode];
480
481 /* Forward pause packets to GMAC? */
482 if (sky2->flow_mode & FC_RX)
483 sky2_write8(hw, SK_REG(port, GMAC_CTRL), GMC_PAUSE_ON);
484 else
485 sky2_write8(hw, SK_REG(port, GMAC_CTRL), GMC_PAUSE_OFF);
486 }
487
488 gma_write16(hw, port, GM_GP_CTRL, reg);
489
490 if (hw->flags & SKY2_HW_GIGABIT)
491 gm_phy_write(hw, port, PHY_MARV_1000T_CTRL, ct1000);
492
493 gm_phy_write(hw, port, PHY_MARV_AUNE_ADV, adv);
494 gm_phy_write(hw, port, PHY_MARV_CTRL, ctrl);
495
496 /* Setup Phy LED's */
497 ledctrl = PHY_M_LED_PULS_DUR(PULS_170MS);
498 ledover = 0;
499
500 switch (hw->chip_id) {
501 case CHIP_ID_YUKON_FE:
502 /* on 88E3082 these bits are at 11..9 (shifted left) */
503 ledctrl |= PHY_M_LED_BLINK_RT(BLINK_84MS) << 1;
504
505 ctrl = gm_phy_read(hw, port, PHY_MARV_FE_LED_PAR);
506
507 /* delete ACT LED control bits */
508 ctrl &= ~PHY_M_FELP_LED1_MSK;
509 /* change ACT LED control to blink mode */
510 ctrl |= PHY_M_FELP_LED1_CTRL(LED_PAR_CTRL_ACT_BL);
511 gm_phy_write(hw, port, PHY_MARV_FE_LED_PAR, ctrl);
512 break;
513
514 case CHIP_ID_YUKON_FE_P:
515 /* Enable Link Partner Next Page */
516 ctrl = gm_phy_read(hw, port, PHY_MARV_PHY_CTRL);
517 ctrl |= PHY_M_PC_ENA_LIP_NP;
518
519 /* disable Energy Detect and enable scrambler */
520 ctrl &= ~(PHY_M_PC_ENA_ENE_DT | PHY_M_PC_DIS_SCRAMB);
521 gm_phy_write(hw, port, PHY_MARV_PHY_CTRL, ctrl);
522
523 /* set LED2 -> ACT, LED1 -> LINK, LED0 -> SPEED */
524 ctrl = PHY_M_FELP_LED2_CTRL(LED_PAR_CTRL_ACT_BL) |
525 PHY_M_FELP_LED1_CTRL(LED_PAR_CTRL_LINK) |
526 PHY_M_FELP_LED0_CTRL(LED_PAR_CTRL_SPEED);
527
528 gm_phy_write(hw, port, PHY_MARV_FE_LED_PAR, ctrl);
529 break;
530
531 case CHIP_ID_YUKON_XL:
532 pg = gm_phy_read(hw, port, PHY_MARV_EXT_ADR);
533
534 /* select page 3 to access LED control register */
535 gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 3);
536
537 /* set LED Function Control register */
538 gm_phy_write(hw, port, PHY_MARV_PHY_CTRL,
539 (PHY_M_LEDC_LOS_CTRL(1) | /* LINK/ACT */
540 PHY_M_LEDC_INIT_CTRL(7) | /* 10 Mbps */
541 PHY_M_LEDC_STA1_CTRL(7) | /* 100 Mbps */
542 PHY_M_LEDC_STA0_CTRL(7))); /* 1000 Mbps */
543
544 /* set Polarity Control register */
545 gm_phy_write(hw, port, PHY_MARV_PHY_STAT,
546 (PHY_M_POLC_LS1_P_MIX(4) |
547 PHY_M_POLC_IS0_P_MIX(4) |
548 PHY_M_POLC_LOS_CTRL(2) |
549 PHY_M_POLC_INIT_CTRL(2) |
550 PHY_M_POLC_STA1_CTRL(2) |
551 PHY_M_POLC_STA0_CTRL(2)));
552
553 /* restore page register */
554 gm_phy_write(hw, port, PHY_MARV_EXT_ADR, pg);
555 break;
556
557 case CHIP_ID_YUKON_EC_U:
558 case CHIP_ID_YUKON_EX:
559 case CHIP_ID_YUKON_SUPR:
560 pg = gm_phy_read(hw, port, PHY_MARV_EXT_ADR);
561
562 /* select page 3 to access LED control register */
563 gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 3);
564
565 /* set LED Function Control register */
566 gm_phy_write(hw, port, PHY_MARV_PHY_CTRL,
567 (PHY_M_LEDC_LOS_CTRL(1) | /* LINK/ACT */
568 PHY_M_LEDC_INIT_CTRL(8) | /* 10 Mbps */
569 PHY_M_LEDC_STA1_CTRL(7) | /* 100 Mbps */
570 PHY_M_LEDC_STA0_CTRL(7)));/* 1000 Mbps */
571
572 /* set Blink Rate in LED Timer Control Register */
573 gm_phy_write(hw, port, PHY_MARV_INT_MASK,
574 ledctrl | PHY_M_LED_BLINK_RT(BLINK_84MS));
575 /* restore page register */
576 gm_phy_write(hw, port, PHY_MARV_EXT_ADR, pg);
577 break;
578
579 default:
580 /* set Tx LED (LED_TX) to blink mode on Rx OR Tx activity */
581 ledctrl |= PHY_M_LED_BLINK_RT(BLINK_84MS) | PHY_M_LEDC_TX_CTRL;
582
583 /* turn off the Rx LED (LED_RX) */
584 ledover |= PHY_M_LED_MO_RX(MO_LED_OFF);
585 }
586
587 if (hw->chip_id == CHIP_ID_YUKON_EC_U || hw->chip_id == CHIP_ID_YUKON_UL_2) {
588 /* apply fixes in PHY AFE */
589 gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 255);
590
591 /* increase differential signal amplitude in 10BASE-T */
592 gm_phy_write(hw, port, 0x18, 0xaa99);
593 gm_phy_write(hw, port, 0x17, 0x2011);
594
595 if (hw->chip_id == CHIP_ID_YUKON_EC_U) {
596 /* fix for IEEE A/B Symmetry failure in 1000BASE-T */
597 gm_phy_write(hw, port, 0x18, 0xa204);
598 gm_phy_write(hw, port, 0x17, 0x2002);
599 }
600
601 /* set page register to 0 */
602 gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 0);
603 } else if (hw->chip_id == CHIP_ID_YUKON_FE_P &&
604 hw->chip_rev == CHIP_REV_YU_FE2_A0) {
605 /* apply workaround for integrated resistors calibration */
606 gm_phy_write(hw, port, PHY_MARV_PAGE_ADDR, 17);
607 gm_phy_write(hw, port, PHY_MARV_PAGE_DATA, 0x3f60);
608 } else if (hw->chip_id == CHIP_ID_YUKON_OPT && hw->chip_rev == 0) {
609 /* apply fixes in PHY AFE */
610 gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 0x00ff);
611
612 /* apply RDAC termination workaround */
613 gm_phy_write(hw, port, 24, 0x2800);
614 gm_phy_write(hw, port, 23, 0x2001);
615
616 /* set page register back to 0 */
617 gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 0);
618 } else if (hw->chip_id != CHIP_ID_YUKON_EX &&
619 hw->chip_id < CHIP_ID_YUKON_SUPR) {
620 /* no effect on Yukon-XL */
621 gm_phy_write(hw, port, PHY_MARV_LED_CTRL, ledctrl);
622
623 if (!(sky2->flags & SKY2_FLAG_AUTO_SPEED) ||
624 sky2->speed == SPEED_100) {
625 /* turn on 100 Mbps LED (LED_LINK100) */
626 ledover |= PHY_M_LED_MO_100(MO_LED_ON);
627 }
628
629 if (ledover)
630 gm_phy_write(hw, port, PHY_MARV_LED_OVER, ledover);
631
632 }
633
634 /* Enable phy interrupt on auto-negotiation complete (or link up) */
635 if (sky2->flags & SKY2_FLAG_AUTO_SPEED)
636 gm_phy_write(hw, port, PHY_MARV_INT_MASK, PHY_M_IS_AN_COMPL);
637 else
638 gm_phy_write(hw, port, PHY_MARV_INT_MASK, PHY_M_DEF_MSK);
639 }
640
641 static const u32 phy_power[] = { PCI_Y2_PHY1_POWD, PCI_Y2_PHY2_POWD };
642 static const u32 coma_mode[] = { PCI_Y2_PHY1_COMA, PCI_Y2_PHY2_COMA };
643
644 static void sky2_phy_power_up(struct sky2_hw *hw, unsigned port)
645 {
646 u32 reg1;
647
648 sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON);
649 reg1 = sky2_pci_read32(hw, PCI_DEV_REG1);
650 reg1 &= ~phy_power[port];
651
652 if (hw->chip_id == CHIP_ID_YUKON_XL && hw->chip_rev > CHIP_REV_YU_XL_A1)
653 reg1 |= coma_mode[port];
654
655 sky2_pci_write32(hw, PCI_DEV_REG1, reg1);
656 sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
657 sky2_pci_read32(hw, PCI_DEV_REG1);
658
659 if (hw->chip_id == CHIP_ID_YUKON_FE)
660 gm_phy_write(hw, port, PHY_MARV_CTRL, PHY_CT_ANE);
661 else if (hw->flags & SKY2_HW_ADV_POWER_CTL)
662 sky2_write8(hw, SK_REG(port, GPHY_CTRL), GPC_RST_CLR);
663 }
664
665 static void sky2_phy_power_down(struct sky2_hw *hw, unsigned port)
666 {
667 u32 reg1;
668 u16 ctrl;
669
670 /* release GPHY Control reset */
671 sky2_write8(hw, SK_REG(port, GPHY_CTRL), GPC_RST_CLR);
672
673 /* release GMAC reset */
674 sky2_write8(hw, SK_REG(port, GMAC_CTRL), GMC_RST_CLR);
675
676 if (hw->flags & SKY2_HW_NEWER_PHY) {
677 /* select page 2 to access MAC control register */
678 gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 2);
679
680 ctrl = gm_phy_read(hw, port, PHY_MARV_PHY_CTRL);
681 /* allow GMII Power Down */
682 ctrl &= ~PHY_M_MAC_GMIF_PUP;
683 gm_phy_write(hw, port, PHY_MARV_PHY_CTRL, ctrl);
684
685 /* set page register back to 0 */
686 gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 0);
687 }
688
689 /* setup General Purpose Control Register */
690 gma_write16(hw, port, GM_GP_CTRL,
691 GM_GPCR_FL_PASS | GM_GPCR_SPEED_100 |
692 GM_GPCR_AU_DUP_DIS | GM_GPCR_AU_FCT_DIS |
693 GM_GPCR_AU_SPD_DIS);
694
695 if (hw->chip_id != CHIP_ID_YUKON_EC) {
696 if (hw->chip_id == CHIP_ID_YUKON_EC_U) {
697 /* select page 2 to access MAC control register */
698 gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 2);
699
700 ctrl = gm_phy_read(hw, port, PHY_MARV_PHY_CTRL);
701 /* enable Power Down */
702 ctrl |= PHY_M_PC_POW_D_ENA;
703 gm_phy_write(hw, port, PHY_MARV_PHY_CTRL, ctrl);
704
705 /* set page register back to 0 */
706 gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 0);
707 }
708
709 /* set IEEE compatible Power Down Mode (dev. #4.99) */
710 gm_phy_write(hw, port, PHY_MARV_CTRL, PHY_CT_PDOWN);
711 }
712
713 sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON);
714 reg1 = sky2_pci_read32(hw, PCI_DEV_REG1);
715 reg1 |= phy_power[port]; /* set PHY to PowerDown/COMA Mode */
716 sky2_pci_write32(hw, PCI_DEV_REG1, reg1);
717 sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
718 }
719
720 /* Enable Rx/Tx */
721 static void sky2_enable_rx_tx(struct sky2_port *sky2)
722 {
723 struct sky2_hw *hw = sky2->hw;
724 unsigned port = sky2->port;
725 u16 reg;
726
727 reg = gma_read16(hw, port, GM_GP_CTRL);
728 reg |= GM_GPCR_RX_ENA | GM_GPCR_TX_ENA;
729 gma_write16(hw, port, GM_GP_CTRL, reg);
730 }
731
732 /* Force a renegotiation */
733 static void sky2_phy_reinit(struct sky2_port *sky2)
734 {
735 spin_lock_bh(&sky2->phy_lock);
736 sky2_phy_init(sky2->hw, sky2->port);
737 sky2_enable_rx_tx(sky2);
738 spin_unlock_bh(&sky2->phy_lock);
739 }
740
741 /* Put device in state to listen for Wake On Lan */
742 static void sky2_wol_init(struct sky2_port *sky2)
743 {
744 struct sky2_hw *hw = sky2->hw;
745 unsigned port = sky2->port;
746 enum flow_control save_mode;
747 u16 ctrl;
748
749 /* Bring hardware out of reset */
750 sky2_write16(hw, B0_CTST, CS_RST_CLR);
751 sky2_write16(hw, SK_REG(port, GMAC_LINK_CTRL), GMLC_RST_CLR);
752
753 sky2_write8(hw, SK_REG(port, GPHY_CTRL), GPC_RST_CLR);
754 sky2_write8(hw, SK_REG(port, GMAC_CTRL), GMC_RST_CLR);
755
756 /* Force to 10/100
757 * sky2_reset will re-enable on resume
758 */
759 save_mode = sky2->flow_mode;
760 ctrl = sky2->advertising;
761
762 sky2->advertising &= ~(ADVERTISED_1000baseT_Half|ADVERTISED_1000baseT_Full);
763 sky2->flow_mode = FC_NONE;
764
765 spin_lock_bh(&sky2->phy_lock);
766 sky2_phy_power_up(hw, port);
767 sky2_phy_init(hw, port);
768 spin_unlock_bh(&sky2->phy_lock);
769
770 sky2->flow_mode = save_mode;
771 sky2->advertising = ctrl;
772
773 /* Set GMAC to no flow control and auto update for speed/duplex */
774 gma_write16(hw, port, GM_GP_CTRL,
775 GM_GPCR_FC_TX_DIS|GM_GPCR_TX_ENA|GM_GPCR_RX_ENA|
776 GM_GPCR_DUP_FULL|GM_GPCR_FC_RX_DIS|GM_GPCR_AU_FCT_DIS);
777
778 /* Set WOL address */
779 memcpy_toio(hw->regs + WOL_REGS(port, WOL_MAC_ADDR),
780 sky2->netdev->dev_addr, ETH_ALEN);
781
782 /* Turn on appropriate WOL control bits */
783 sky2_write16(hw, WOL_REGS(port, WOL_CTRL_STAT), WOL_CTL_CLEAR_RESULT);
784 ctrl = 0;
785 if (sky2->wol & WAKE_PHY)
786 ctrl |= WOL_CTL_ENA_PME_ON_LINK_CHG|WOL_CTL_ENA_LINK_CHG_UNIT;
787 else
788 ctrl |= WOL_CTL_DIS_PME_ON_LINK_CHG|WOL_CTL_DIS_LINK_CHG_UNIT;
789
790 if (sky2->wol & WAKE_MAGIC)
791 ctrl |= WOL_CTL_ENA_PME_ON_MAGIC_PKT|WOL_CTL_ENA_MAGIC_PKT_UNIT;
792 else
793 ctrl |= WOL_CTL_DIS_PME_ON_MAGIC_PKT|WOL_CTL_DIS_MAGIC_PKT_UNIT;
794
795 ctrl |= WOL_CTL_DIS_PME_ON_PATTERN|WOL_CTL_DIS_PATTERN_UNIT;
796 sky2_write16(hw, WOL_REGS(port, WOL_CTRL_STAT), ctrl);
797
798 /* Disable PiG firmware */
799 sky2_write16(hw, B0_CTST, Y2_HW_WOL_OFF);
800
801 /* block receiver */
802 sky2_write8(hw, SK_REG(port, RX_GMF_CTRL_T), GMF_RST_SET);
803 }
804
805 static void sky2_set_tx_stfwd(struct sky2_hw *hw, unsigned port)
806 {
807 struct net_device *dev = hw->dev[port];
808
809 if ( (hw->chip_id == CHIP_ID_YUKON_EX &&
810 hw->chip_rev != CHIP_REV_YU_EX_A0) ||
811 hw->chip_id >= CHIP_ID_YUKON_FE_P) {
812 /* Yukon-Extreme B0 and further Extreme devices */
813 sky2_write32(hw, SK_REG(port, TX_GMF_CTRL_T), TX_STFW_ENA);
814 } else if (dev->mtu > ETH_DATA_LEN) {
815 /* set Tx GMAC FIFO Almost Empty Threshold */
816 sky2_write32(hw, SK_REG(port, TX_GMF_AE_THR),
817 (ECU_JUMBO_WM << 16) | ECU_AE_THR);
818
819 sky2_write32(hw, SK_REG(port, TX_GMF_CTRL_T), TX_STFW_DIS);
820 } else
821 sky2_write32(hw, SK_REG(port, TX_GMF_CTRL_T), TX_STFW_ENA);
822 }
823
824 static void sky2_mac_init(struct sky2_hw *hw, unsigned port)
825 {
826 struct sky2_port *sky2 = netdev_priv(hw->dev[port]);
827 u16 reg;
828 u32 rx_reg;
829 int i;
830 const u8 *addr = hw->dev[port]->dev_addr;
831
832 sky2_write8(hw, SK_REG(port, GPHY_CTRL), GPC_RST_SET);
833 sky2_write8(hw, SK_REG(port, GPHY_CTRL), GPC_RST_CLR);
834
835 sky2_write8(hw, SK_REG(port, GMAC_CTRL), GMC_RST_CLR);
836
837 if (hw->chip_id == CHIP_ID_YUKON_XL &&
838 hw->chip_rev == CHIP_REV_YU_XL_A0 &&
839 port == 1) {
840 /* WA DEV_472 -- looks like crossed wires on port 2 */
841 /* clear GMAC 1 Control reset */
842 sky2_write8(hw, SK_REG(0, GMAC_CTRL), GMC_RST_CLR);
843 do {
844 sky2_write8(hw, SK_REG(1, GMAC_CTRL), GMC_RST_SET);
845 sky2_write8(hw, SK_REG(1, GMAC_CTRL), GMC_RST_CLR);
846 } while (gm_phy_read(hw, 1, PHY_MARV_ID0) != PHY_MARV_ID0_VAL ||
847 gm_phy_read(hw, 1, PHY_MARV_ID1) != PHY_MARV_ID1_Y2 ||
848 gm_phy_read(hw, 1, PHY_MARV_INT_MASK) != 0);
849 }
850
851 sky2_read16(hw, SK_REG(port, GMAC_IRQ_SRC));
852
853 /* Enable Transmit FIFO Underrun */
854 sky2_write8(hw, SK_REG(port, GMAC_IRQ_MSK), GMAC_DEF_MSK);
855
856 spin_lock_bh(&sky2->phy_lock);
857 sky2_phy_power_up(hw, port);
858 sky2_phy_init(hw, port);
859 spin_unlock_bh(&sky2->phy_lock);
860
861 /* MIB clear */
862 reg = gma_read16(hw, port, GM_PHY_ADDR);
863 gma_write16(hw, port, GM_PHY_ADDR, reg | GM_PAR_MIB_CLR);
864
865 for (i = GM_MIB_CNT_BASE; i <= GM_MIB_CNT_END; i += 4)
866 gma_read16(hw, port, i);
867 gma_write16(hw, port, GM_PHY_ADDR, reg);
868
869 /* transmit control */
870 gma_write16(hw, port, GM_TX_CTRL, TX_COL_THR(TX_COL_DEF));
871
872 /* receive control reg: unicast + multicast + no FCS */
873 gma_write16(hw, port, GM_RX_CTRL,
874 GM_RXCR_UCF_ENA | GM_RXCR_CRC_DIS | GM_RXCR_MCF_ENA);
875
876 /* transmit flow control */
877 gma_write16(hw, port, GM_TX_FLOW_CTRL, 0xffff);
878
879 /* transmit parameter */
880 gma_write16(hw, port, GM_TX_PARAM,
881 TX_JAM_LEN_VAL(TX_JAM_LEN_DEF) |
882 TX_JAM_IPG_VAL(TX_JAM_IPG_DEF) |
883 TX_IPG_JAM_DATA(TX_IPG_JAM_DEF) |
884 TX_BACK_OFF_LIM(TX_BOF_LIM_DEF));
885
886 /* serial mode register */
887 reg = DATA_BLIND_VAL(DATA_BLIND_DEF) |
888 GM_SMOD_VLAN_ENA | IPG_DATA_VAL(IPG_DATA_DEF);
889
890 if (hw->dev[port]->mtu > ETH_DATA_LEN)
891 reg |= GM_SMOD_JUMBO_ENA;
892
893 if (hw->chip_id == CHIP_ID_YUKON_EC_U &&
894 hw->chip_rev == CHIP_REV_YU_EC_U_B1)
895 reg |= GM_NEW_FLOW_CTRL;
896
897 gma_write16(hw, port, GM_SERIAL_MODE, reg);
898
899 /* virtual address for data */
900 gma_set_addr(hw, port, GM_SRC_ADDR_2L, addr);
901
902 /* physical address: used for pause frames */
903 gma_set_addr(hw, port, GM_SRC_ADDR_1L, addr);
904
905 /* ignore counter overflows */
906 gma_write16(hw, port, GM_TX_IRQ_MSK, 0);
907 gma_write16(hw, port, GM_RX_IRQ_MSK, 0);
908 gma_write16(hw, port, GM_TR_IRQ_MSK, 0);
909
910 /* Configure Rx MAC FIFO */
911 sky2_write8(hw, SK_REG(port, RX_GMF_CTRL_T), GMF_RST_CLR);
912 rx_reg = GMF_OPER_ON | GMF_RX_F_FL_ON;
913 if (hw->chip_id == CHIP_ID_YUKON_EX ||
914 hw->chip_id == CHIP_ID_YUKON_FE_P)
915 rx_reg |= GMF_RX_OVER_ON;
916
917 sky2_write32(hw, SK_REG(port, RX_GMF_CTRL_T), rx_reg);
918
919 if (hw->chip_id == CHIP_ID_YUKON_XL) {
920 /* Hardware errata - clear flush mask */
921 sky2_write16(hw, SK_REG(port, RX_GMF_FL_MSK), 0);
922 } else {
923 /* Flush Rx MAC FIFO on any flow control or error */
924 sky2_write16(hw, SK_REG(port, RX_GMF_FL_MSK), GMR_FS_ANY_ERR);
925 }
926
927 /* Set threshold to 0xa (64 bytes) + 1 to workaround pause bug */
928 reg = RX_GMF_FL_THR_DEF + 1;
929 /* Another magic mystery workaround from sk98lin */
930 if (hw->chip_id == CHIP_ID_YUKON_FE_P &&
931 hw->chip_rev == CHIP_REV_YU_FE2_A0)
932 reg = 0x178;
933 sky2_write16(hw, SK_REG(port, RX_GMF_FL_THR), reg);
934
935 /* Configure Tx MAC FIFO */
936 sky2_write8(hw, SK_REG(port, TX_GMF_CTRL_T), GMF_RST_CLR);
937 sky2_write16(hw, SK_REG(port, TX_GMF_CTRL_T), GMF_OPER_ON);
938
939 /* On chips without ram buffer, pause is controled by MAC level */
940 if (!(hw->flags & SKY2_HW_RAM_BUFFER)) {
941 /* Pause threshold is scaled by 8 in bytes */
942 if (hw->chip_id == CHIP_ID_YUKON_FE_P &&
943 hw->chip_rev == CHIP_REV_YU_FE2_A0)
944 reg = 1568 / 8;
945 else
946 reg = 1024 / 8;
947 sky2_write16(hw, SK_REG(port, RX_GMF_UP_THR), reg);
948 sky2_write16(hw, SK_REG(port, RX_GMF_LP_THR), 768 / 8);
949
950 sky2_set_tx_stfwd(hw, port);
951 }
952
953 if (hw->chip_id == CHIP_ID_YUKON_FE_P &&
954 hw->chip_rev == CHIP_REV_YU_FE2_A0) {
955 /* disable dynamic watermark */
956 reg = sky2_read16(hw, SK_REG(port, TX_GMF_EA));
957 reg &= ~TX_DYN_WM_ENA;
958 sky2_write16(hw, SK_REG(port, TX_GMF_EA), reg);
959 }
960 }
961
962 /* Assign Ram Buffer allocation to queue */
963 static void sky2_ramset(struct sky2_hw *hw, u16 q, u32 start, u32 space)
964 {
965 u32 end;
966
967 /* convert from K bytes to qwords used for hw register */
968 start *= 1024/8;
969 space *= 1024/8;
970 end = start + space - 1;
971
972 sky2_write8(hw, RB_ADDR(q, RB_CTRL), RB_RST_CLR);
973 sky2_write32(hw, RB_ADDR(q, RB_START), start);
974 sky2_write32(hw, RB_ADDR(q, RB_END), end);
975 sky2_write32(hw, RB_ADDR(q, RB_WP), start);
976 sky2_write32(hw, RB_ADDR(q, RB_RP), start);
977
978 if (q == Q_R1 || q == Q_R2) {
979 u32 tp = space - space/4;
980
981 /* On receive queue's set the thresholds
982 * give receiver priority when > 3/4 full
983 * send pause when down to 2K
984 */
985 sky2_write32(hw, RB_ADDR(q, RB_RX_UTHP), tp);
986 sky2_write32(hw, RB_ADDR(q, RB_RX_LTHP), space/2);
987
988 tp = space - 2048/8;
989 sky2_write32(hw, RB_ADDR(q, RB_RX_UTPP), tp);
990 sky2_write32(hw, RB_ADDR(q, RB_RX_LTPP), space/4);
991 } else {
992 /* Enable store & forward on Tx queue's because
993 * Tx FIFO is only 1K on Yukon
994 */
995 sky2_write8(hw, RB_ADDR(q, RB_CTRL), RB_ENA_STFWD);
996 }
997
998 sky2_write8(hw, RB_ADDR(q, RB_CTRL), RB_ENA_OP_MD);
999 sky2_read8(hw, RB_ADDR(q, RB_CTRL));
1000 }
1001
1002 /* Setup Bus Memory Interface */
1003 static void sky2_qset(struct sky2_hw *hw, u16 q)
1004 {
1005 sky2_write32(hw, Q_ADDR(q, Q_CSR), BMU_CLR_RESET);
1006 sky2_write32(hw, Q_ADDR(q, Q_CSR), BMU_OPER_INIT);
1007 sky2_write32(hw, Q_ADDR(q, Q_CSR), BMU_FIFO_OP_ON);
1008 sky2_write32(hw, Q_ADDR(q, Q_WM), BMU_WM_DEFAULT);
1009 }
1010
1011 /* Setup prefetch unit registers. This is the interface between
1012 * hardware and driver list elements
1013 */
1014 static void sky2_prefetch_init(struct sky2_hw *hw, u32 qaddr,
1015 dma_addr_t addr, u32 last)
1016 {
1017 sky2_write32(hw, Y2_QADDR(qaddr, PREF_UNIT_CTRL), PREF_UNIT_RST_SET);
1018 sky2_write32(hw, Y2_QADDR(qaddr, PREF_UNIT_CTRL), PREF_UNIT_RST_CLR);
1019 sky2_write32(hw, Y2_QADDR(qaddr, PREF_UNIT_ADDR_HI), upper_32_bits(addr));
1020 sky2_write32(hw, Y2_QADDR(qaddr, PREF_UNIT_ADDR_LO), lower_32_bits(addr));
1021 sky2_write16(hw, Y2_QADDR(qaddr, PREF_UNIT_LAST_IDX), last);
1022 sky2_write32(hw, Y2_QADDR(qaddr, PREF_UNIT_CTRL), PREF_UNIT_OP_ON);
1023
1024 sky2_read32(hw, Y2_QADDR(qaddr, PREF_UNIT_CTRL));
1025 }
1026
1027 static inline struct sky2_tx_le *get_tx_le(struct sky2_port *sky2, u16 *slot)
1028 {
1029 struct sky2_tx_le *le = sky2->tx_le + *slot;
1030
1031 *slot = RING_NEXT(*slot, sky2->tx_ring_size);
1032 le->ctrl = 0;
1033 return le;
1034 }
1035
1036 static void tx_init(struct sky2_port *sky2)
1037 {
1038 struct sky2_tx_le *le;
1039
1040 sky2->tx_prod = sky2->tx_cons = 0;
1041 sky2->tx_tcpsum = 0;
1042 sky2->tx_last_mss = 0;
1043
1044 le = get_tx_le(sky2, &sky2->tx_prod);
1045 le->addr = 0;
1046 le->opcode = OP_ADDR64 | HW_OWNER;
1047 sky2->tx_last_upper = 0;
1048 }
1049
1050 /* Update chip's next pointer */
1051 static inline void sky2_put_idx(struct sky2_hw *hw, unsigned q, u16 idx)
1052 {
1053 /* Make sure write' to descriptors are complete before we tell hardware */
1054 wmb();
1055 sky2_write16(hw, Y2_QADDR(q, PREF_UNIT_PUT_IDX), idx);
1056
1057 /* Synchronize I/O on since next processor may write to tail */
1058 mmiowb();
1059 }
1060
1061
1062 static inline struct sky2_rx_le *sky2_next_rx(struct sky2_port *sky2)
1063 {
1064 struct sky2_rx_le *le = sky2->rx_le + sky2->rx_put;
1065 sky2->rx_put = RING_NEXT(sky2->rx_put, RX_LE_SIZE);
1066 le->ctrl = 0;
1067 return le;
1068 }
1069
1070 static unsigned sky2_get_rx_threshold(struct sky2_port* sky2)
1071 {
1072 unsigned size;
1073
1074 /* Space needed for frame data + headers rounded up */
1075 size = roundup(sky2->netdev->mtu + ETH_HLEN + VLAN_HLEN, 8);
1076
1077 /* Stopping point for hardware truncation */
1078 return (size - 8) / sizeof(u32);
1079 }
1080
1081 static unsigned sky2_get_rx_data_size(struct sky2_port* sky2)
1082 {
1083 struct rx_ring_info *re;
1084 unsigned size;
1085
1086 /* Space needed for frame data + headers rounded up */
1087 size = roundup(sky2->netdev->mtu + ETH_HLEN + VLAN_HLEN, 8);
1088
1089 sky2->rx_nfrags = size >> PAGE_SHIFT;
1090 BUG_ON(sky2->rx_nfrags > ARRAY_SIZE(re->frag_addr));
1091
1092 /* Compute residue after pages */
1093 size -= sky2->rx_nfrags << PAGE_SHIFT;
1094
1095 /* Optimize to handle small packets and headers */
1096 if (size < copybreak)
1097 size = copybreak;
1098 if (size < ETH_HLEN)
1099 size = ETH_HLEN;
1100
1101 return size;
1102 }
1103
1104 /* Build description to hardware for one receive segment */
1105 static void sky2_rx_add(struct sky2_port *sky2, u8 op,
1106 dma_addr_t map, unsigned len)
1107 {
1108 struct sky2_rx_le *le;
1109
1110 if (sizeof(dma_addr_t) > sizeof(u32)) {
1111 le = sky2_next_rx(sky2);
1112 le->addr = cpu_to_le32(upper_32_bits(map));
1113 le->opcode = OP_ADDR64 | HW_OWNER;
1114 }
1115
1116 le = sky2_next_rx(sky2);
1117 le->addr = cpu_to_le32(lower_32_bits(map));
1118 le->length = cpu_to_le16(len);
1119 le->opcode = op | HW_OWNER;
1120 }
1121
1122 /* Build description to hardware for one possibly fragmented skb */
1123 static void sky2_rx_submit(struct sky2_port *sky2,
1124 const struct rx_ring_info *re)
1125 {
1126 int i;
1127
1128 sky2_rx_add(sky2, OP_PACKET, re->data_addr, sky2->rx_data_size);
1129
1130 for (i = 0; i < skb_shinfo(re->skb)->nr_frags; i++)
1131 sky2_rx_add(sky2, OP_BUFFER, re->frag_addr[i], PAGE_SIZE);
1132 }
1133
1134
1135 static int sky2_rx_map_skb(struct pci_dev *pdev, struct rx_ring_info *re,
1136 unsigned size)
1137 {
1138 struct sk_buff *skb = re->skb;
1139 int i;
1140
1141 re->data_addr = pci_map_single(pdev, skb->data, size, PCI_DMA_FROMDEVICE);
1142 if (pci_dma_mapping_error(pdev, re->data_addr))
1143 goto mapping_error;
1144
1145 dma_unmap_len_set(re, data_size, size);
1146
1147 for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) {
1148 skb_frag_t *frag = &skb_shinfo(skb)->frags[i];
1149
1150 re->frag_addr[i] = pci_map_page(pdev, frag->page,
1151 frag->page_offset,
1152 frag->size,
1153 PCI_DMA_FROMDEVICE);
1154
1155 if (pci_dma_mapping_error(pdev, re->frag_addr[i]))
1156 goto map_page_error;
1157 }
1158 return 0;
1159
1160 map_page_error:
1161 while (--i >= 0) {
1162 pci_unmap_page(pdev, re->frag_addr[i],
1163 skb_shinfo(skb)->frags[i].size,
1164 PCI_DMA_FROMDEVICE);
1165 }
1166
1167 pci_unmap_single(pdev, re->data_addr, dma_unmap_len(re, data_size),
1168 PCI_DMA_FROMDEVICE);
1169
1170 mapping_error:
1171 if (net_ratelimit())
1172 dev_warn(&pdev->dev, "%s: rx mapping error\n",
1173 skb->dev->name);
1174 return -EIO;
1175 }
1176
1177 static void sky2_rx_unmap_skb(struct pci_dev *pdev, struct rx_ring_info *re)
1178 {
1179 struct sk_buff *skb = re->skb;
1180 int i;
1181
1182 pci_unmap_single(pdev, re->data_addr, dma_unmap_len(re, data_size),
1183 PCI_DMA_FROMDEVICE);
1184
1185 for (i = 0; i < skb_shinfo(skb)->nr_frags; i++)
1186 pci_unmap_page(pdev, re->frag_addr[i],
1187 skb_shinfo(skb)->frags[i].size,
1188 PCI_DMA_FROMDEVICE);
1189 }
1190
1191 /* Tell chip where to start receive checksum.
1192 * Actually has two checksums, but set both same to avoid possible byte
1193 * order problems.
1194 */
1195 static void rx_set_checksum(struct sky2_port *sky2)
1196 {
1197 struct sky2_rx_le *le = sky2_next_rx(sky2);
1198
1199 le->addr = cpu_to_le32((ETH_HLEN << 16) | ETH_HLEN);
1200 le->ctrl = 0;
1201 le->opcode = OP_TCPSTART | HW_OWNER;
1202
1203 sky2_write32(sky2->hw,
1204 Q_ADDR(rxqaddr[sky2->port], Q_CSR),
1205 (sky2->flags & SKY2_FLAG_RX_CHECKSUM)
1206 ? BMU_ENA_RX_CHKSUM : BMU_DIS_RX_CHKSUM);
1207 }
1208
1209 /* Enable/disable receive hash calculation (RSS) */
1210 static void rx_set_rss(struct net_device *dev)
1211 {
1212 struct sky2_port *sky2 = netdev_priv(dev);
1213 struct sky2_hw *hw = sky2->hw;
1214 int i, nkeys = 4;
1215
1216 /* Supports IPv6 and other modes */
1217 if (hw->flags & SKY2_HW_NEW_LE) {
1218 nkeys = 10;
1219 sky2_write32(hw, SK_REG(sky2->port, RSS_CFG), HASH_ALL);
1220 }
1221
1222 /* Program RSS initial values */
1223 if (dev->features & NETIF_F_RXHASH) {
1224 u32 key[nkeys];
1225
1226 get_random_bytes(key, nkeys * sizeof(u32));
1227 for (i = 0; i < nkeys; i++)
1228 sky2_write32(hw, SK_REG(sky2->port, RSS_KEY + i * 4),
1229 key[i]);
1230
1231 /* Need to turn on (undocumented) flag to make hashing work */
1232 sky2_write32(hw, SK_REG(sky2->port, RX_GMF_CTRL_T),
1233 RX_STFW_ENA);
1234
1235 sky2_write32(hw, Q_ADDR(rxqaddr[sky2->port], Q_CSR),
1236 BMU_ENA_RX_RSS_HASH);
1237 } else
1238 sky2_write32(hw, Q_ADDR(rxqaddr[sky2->port], Q_CSR),
1239 BMU_DIS_RX_RSS_HASH);
1240 }
1241
1242 /*
1243 * The RX Stop command will not work for Yukon-2 if the BMU does not
1244 * reach the end of packet and since we can't make sure that we have
1245 * incoming data, we must reset the BMU while it is not doing a DMA
1246 * transfer. Since it is possible that the RX path is still active,
1247 * the RX RAM buffer will be stopped first, so any possible incoming
1248 * data will not trigger a DMA. After the RAM buffer is stopped, the
1249 * BMU is polled until any DMA in progress is ended and only then it
1250 * will be reset.
1251 */
1252 static void sky2_rx_stop(struct sky2_port *sky2)
1253 {
1254 struct sky2_hw *hw = sky2->hw;
1255 unsigned rxq = rxqaddr[sky2->port];
1256 int i;
1257
1258 /* disable the RAM Buffer receive queue */
1259 sky2_write8(hw, RB_ADDR(rxq, RB_CTRL), RB_DIS_OP_MD);
1260
1261 for (i = 0; i < 0xffff; i++)
1262 if (sky2_read8(hw, RB_ADDR(rxq, Q_RSL))
1263 == sky2_read8(hw, RB_ADDR(rxq, Q_RL)))
1264 goto stopped;
1265
1266 netdev_warn(sky2->netdev, "receiver stop failed\n");
1267 stopped:
1268 sky2_write32(hw, Q_ADDR(rxq, Q_CSR), BMU_RST_SET | BMU_FIFO_RST);
1269
1270 /* reset the Rx prefetch unit */
1271 sky2_write32(hw, Y2_QADDR(rxq, PREF_UNIT_CTRL), PREF_UNIT_RST_SET);
1272 mmiowb();
1273 }
1274
1275 /* Clean out receive buffer area, assumes receiver hardware stopped */
1276 static void sky2_rx_clean(struct sky2_port *sky2)
1277 {
1278 unsigned i;
1279
1280 memset(sky2->rx_le, 0, RX_LE_BYTES);
1281 for (i = 0; i < sky2->rx_pending; i++) {
1282 struct rx_ring_info *re = sky2->rx_ring + i;
1283
1284 if (re->skb) {
1285 sky2_rx_unmap_skb(sky2->hw->pdev, re);
1286 kfree_skb(re->skb);
1287 re->skb = NULL;
1288 }
1289 }
1290 }
1291
1292 /* Basic MII support */
1293 static int sky2_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
1294 {
1295 struct mii_ioctl_data *data = if_mii(ifr);
1296 struct sky2_port *sky2 = netdev_priv(dev);
1297 struct sky2_hw *hw = sky2->hw;
1298 int err = -EOPNOTSUPP;
1299
1300 if (!netif_running(dev))
1301 return -ENODEV; /* Phy still in reset */
1302
1303 switch (cmd) {
1304 case SIOCGMIIPHY:
1305 data->phy_id = PHY_ADDR_MARV;
1306
1307 /* fallthru */
1308 case SIOCGMIIREG: {
1309 u16 val = 0;
1310
1311 spin_lock_bh(&sky2->phy_lock);
1312 err = __gm_phy_read(hw, sky2->port, data->reg_num & 0x1f, &val);
1313 spin_unlock_bh(&sky2->phy_lock);
1314
1315 data->val_out = val;
1316 break;
1317 }
1318
1319 case SIOCSMIIREG:
1320 spin_lock_bh(&sky2->phy_lock);
1321 err = gm_phy_write(hw, sky2->port, data->reg_num & 0x1f,
1322 data->val_in);
1323 spin_unlock_bh(&sky2->phy_lock);
1324 break;
1325 }
1326 return err;
1327 }
1328
1329 #ifdef SKY2_VLAN_TAG_USED
1330 static void sky2_set_vlan_mode(struct sky2_hw *hw, u16 port, bool onoff)
1331 {
1332 if (onoff) {
1333 sky2_write32(hw, SK_REG(port, RX_GMF_CTRL_T),
1334 RX_VLAN_STRIP_ON);
1335 sky2_write32(hw, SK_REG(port, TX_GMF_CTRL_T),
1336 TX_VLAN_TAG_ON);
1337 } else {
1338 sky2_write32(hw, SK_REG(port, RX_GMF_CTRL_T),
1339 RX_VLAN_STRIP_OFF);
1340 sky2_write32(hw, SK_REG(port, TX_GMF_CTRL_T),
1341 TX_VLAN_TAG_OFF);
1342 }
1343 }
1344
1345 static void sky2_vlan_rx_register(struct net_device *dev, struct vlan_group *grp)
1346 {
1347 struct sky2_port *sky2 = netdev_priv(dev);
1348 struct sky2_hw *hw = sky2->hw;
1349 u16 port = sky2->port;
1350
1351 netif_tx_lock_bh(dev);
1352 napi_disable(&hw->napi);
1353
1354 sky2->vlgrp = grp;
1355 sky2_set_vlan_mode(hw, port, grp != NULL);
1356
1357 sky2_read32(hw, B0_Y2_SP_LISR);
1358 napi_enable(&hw->napi);
1359 netif_tx_unlock_bh(dev);
1360 }
1361 #endif
1362
1363 /* Amount of required worst case padding in rx buffer */
1364 static inline unsigned sky2_rx_pad(const struct sky2_hw *hw)
1365 {
1366 return (hw->flags & SKY2_HW_RAM_BUFFER) ? 8 : 2;
1367 }
1368
1369 /*
1370 * Allocate an skb for receiving. If the MTU is large enough
1371 * make the skb non-linear with a fragment list of pages.
1372 */
1373 static struct sk_buff *sky2_rx_alloc(struct sky2_port *sky2)
1374 {
1375 struct sk_buff *skb;
1376 int i;
1377
1378 skb = netdev_alloc_skb(sky2->netdev,
1379 sky2->rx_data_size + sky2_rx_pad(sky2->hw));
1380 if (!skb)
1381 goto nomem;
1382
1383 if (sky2->hw->flags & SKY2_HW_RAM_BUFFER) {
1384 unsigned char *start;
1385 /*
1386 * Workaround for a bug in FIFO that cause hang
1387 * if the FIFO if the receive buffer is not 64 byte aligned.
1388 * The buffer returned from netdev_alloc_skb is
1389 * aligned except if slab debugging is enabled.
1390 */
1391 start = PTR_ALIGN(skb->data, 8);
1392 skb_reserve(skb, start - skb->data);
1393 } else
1394 skb_reserve(skb, NET_IP_ALIGN);
1395
1396 for (i = 0; i < sky2->rx_nfrags; i++) {
1397 struct page *page = alloc_page(GFP_ATOMIC);
1398
1399 if (!page)
1400 goto free_partial;
1401 skb_fill_page_desc(skb, i, page, 0, PAGE_SIZE);
1402 }
1403
1404 return skb;
1405 free_partial:
1406 kfree_skb(skb);
1407 nomem:
1408 return NULL;
1409 }
1410
1411 static inline void sky2_rx_update(struct sky2_port *sky2, unsigned rxq)
1412 {
1413 sky2_put_idx(sky2->hw, rxq, sky2->rx_put);
1414 }
1415
1416 static int sky2_alloc_rx_skbs(struct sky2_port *sky2)
1417 {
1418 struct sky2_hw *hw = sky2->hw;
1419 unsigned i;
1420
1421 sky2->rx_data_size = sky2_get_rx_data_size(sky2);
1422
1423 /* Fill Rx ring */
1424 for (i = 0; i < sky2->rx_pending; i++) {
1425 struct rx_ring_info *re = sky2->rx_ring + i;
1426
1427 re->skb = sky2_rx_alloc(sky2);
1428 if (!re->skb)
1429 return -ENOMEM;
1430
1431 if (sky2_rx_map_skb(hw->pdev, re, sky2->rx_data_size)) {
1432 dev_kfree_skb(re->skb);
1433 re->skb = NULL;
1434 return -ENOMEM;
1435 }
1436 }
1437 return 0;
1438 }
1439
1440 /*
1441 * Setup receiver buffer pool.
1442 * Normal case this ends up creating one list element for skb
1443 * in the receive ring. Worst case if using large MTU and each
1444 * allocation falls on a different 64 bit region, that results
1445 * in 6 list elements per ring entry.
1446 * One element is used for checksum enable/disable, and one
1447 * extra to avoid wrap.
1448 */
1449 static void sky2_rx_start(struct sky2_port *sky2)
1450 {
1451 struct sky2_hw *hw = sky2->hw;
1452 struct rx_ring_info *re;
1453 unsigned rxq = rxqaddr[sky2->port];
1454 unsigned i, thresh;
1455
1456 sky2->rx_put = sky2->rx_next = 0;
1457 sky2_qset(hw, rxq);
1458
1459 /* On PCI express lowering the watermark gives better performance */
1460 if (pci_find_capability(hw->pdev, PCI_CAP_ID_EXP))
1461 sky2_write32(hw, Q_ADDR(rxq, Q_WM), BMU_WM_PEX);
1462
1463 /* These chips have no ram buffer?
1464 * MAC Rx RAM Read is controlled by hardware */
1465 if (hw->chip_id == CHIP_ID_YUKON_EC_U &&
1466 hw->chip_rev > CHIP_REV_YU_EC_U_A0)
1467 sky2_write32(hw, Q_ADDR(rxq, Q_TEST), F_M_RX_RAM_DIS);
1468
1469 sky2_prefetch_init(hw, rxq, sky2->rx_le_map, RX_LE_SIZE - 1);
1470
1471 if (!(hw->flags & SKY2_HW_NEW_LE))
1472 rx_set_checksum(sky2);
1473
1474 if (!(hw->flags & SKY2_HW_RSS_BROKEN))
1475 rx_set_rss(sky2->netdev);
1476
1477 /* submit Rx ring */
1478 for (i = 0; i < sky2->rx_pending; i++) {
1479 re = sky2->rx_ring + i;
1480 sky2_rx_submit(sky2, re);
1481 }
1482
1483 /*
1484 * The receiver hangs if it receives frames larger than the
1485 * packet buffer. As a workaround, truncate oversize frames, but
1486 * the register is limited to 9 bits, so if you do frames > 2052
1487 * you better get the MTU right!
1488 */
1489 thresh = sky2_get_rx_threshold(sky2);
1490 if (thresh > 0x1ff)
1491 sky2_write32(hw, SK_REG(sky2->port, RX_GMF_CTRL_T), RX_TRUNC_OFF);
1492 else {
1493 sky2_write16(hw, SK_REG(sky2->port, RX_GMF_TR_THR), thresh);
1494 sky2_write32(hw, SK_REG(sky2->port, RX_GMF_CTRL_T), RX_TRUNC_ON);
1495 }
1496
1497 /* Tell chip about available buffers */
1498 sky2_rx_update(sky2, rxq);
1499
1500 if (hw->chip_id == CHIP_ID_YUKON_EX ||
1501 hw->chip_id == CHIP_ID_YUKON_SUPR) {
1502 /*
1503 * Disable flushing of non ASF packets;
1504 * must be done after initializing the BMUs;
1505 * drivers without ASF support should do this too, otherwise
1506 * it may happen that they cannot run on ASF devices;
1507 * remember that the MAC FIFO isn't reset during initialization.
1508 */
1509 sky2_write32(hw, SK_REG(sky2->port, RX_GMF_CTRL_T), RX_MACSEC_FLUSH_OFF);
1510 }
1511
1512 if (hw->chip_id >= CHIP_ID_YUKON_SUPR) {
1513 /* Enable RX Home Address & Routing Header checksum fix */
1514 sky2_write16(hw, SK_REG(sky2->port, RX_GMF_FL_CTRL),
1515 RX_IPV6_SA_MOB_ENA | RX_IPV6_DA_MOB_ENA);
1516
1517 /* Enable TX Home Address & Routing Header checksum fix */
1518 sky2_write32(hw, Q_ADDR(txqaddr[sky2->port], Q_TEST),
1519 TBMU_TEST_HOME_ADD_FIX_EN | TBMU_TEST_ROUTING_ADD_FIX_EN);
1520 }
1521 }
1522
1523 static int sky2_alloc_buffers(struct sky2_port *sky2)
1524 {
1525 struct sky2_hw *hw = sky2->hw;
1526
1527 /* must be power of 2 */
1528 sky2->tx_le = pci_alloc_consistent(hw->pdev,
1529 sky2->tx_ring_size *
1530 sizeof(struct sky2_tx_le),
1531 &sky2->tx_le_map);
1532 if (!sky2->tx_le)
1533 goto nomem;
1534
1535 sky2->tx_ring = kcalloc(sky2->tx_ring_size, sizeof(struct tx_ring_info),
1536 GFP_KERNEL);
1537 if (!sky2->tx_ring)
1538 goto nomem;
1539
1540 sky2->rx_le = pci_alloc_consistent(hw->pdev, RX_LE_BYTES,
1541 &sky2->rx_le_map);
1542 if (!sky2->rx_le)
1543 goto nomem;
1544 memset(sky2->rx_le, 0, RX_LE_BYTES);
1545
1546 sky2->rx_ring = kcalloc(sky2->rx_pending, sizeof(struct rx_ring_info),
1547 GFP_KERNEL);
1548 if (!sky2->rx_ring)
1549 goto nomem;
1550
1551 return sky2_alloc_rx_skbs(sky2);
1552 nomem:
1553 return -ENOMEM;
1554 }
1555
1556 static void sky2_free_buffers(struct sky2_port *sky2)
1557 {
1558 struct sky2_hw *hw = sky2->hw;
1559
1560 sky2_rx_clean(sky2);
1561
1562 if (sky2->rx_le) {
1563 pci_free_consistent(hw->pdev, RX_LE_BYTES,
1564 sky2->rx_le, sky2->rx_le_map);
1565 sky2->rx_le = NULL;
1566 }
1567 if (sky2->tx_le) {
1568 pci_free_consistent(hw->pdev,
1569 sky2->tx_ring_size * sizeof(struct sky2_tx_le),
1570 sky2->tx_le, sky2->tx_le_map);
1571 sky2->tx_le = NULL;
1572 }
1573 kfree(sky2->tx_ring);
1574 kfree(sky2->rx_ring);
1575
1576 sky2->tx_ring = NULL;
1577 sky2->rx_ring = NULL;
1578 }
1579
1580 static void sky2_hw_up(struct sky2_port *sky2)
1581 {
1582 struct sky2_hw *hw = sky2->hw;
1583 unsigned port = sky2->port;
1584 u32 ramsize;
1585 int cap;
1586 struct net_device *otherdev = hw->dev[sky2->port^1];
1587
1588 tx_init(sky2);
1589
1590 /*
1591 * On dual port PCI-X card, there is an problem where status
1592 * can be received out of order due to split transactions
1593 */
1594 if (otherdev && netif_running(otherdev) &&
1595 (cap = pci_find_capability(hw->pdev, PCI_CAP_ID_PCIX))) {
1596 u16 cmd;
1597
1598 cmd = sky2_pci_read16(hw, cap + PCI_X_CMD);
1599 cmd &= ~PCI_X_CMD_MAX_SPLIT;
1600 sky2_pci_write16(hw, cap + PCI_X_CMD, cmd);
1601 }
1602
1603 sky2_mac_init(hw, port);
1604
1605 /* Register is number of 4K blocks on internal RAM buffer. */
1606 ramsize = sky2_read8(hw, B2_E_0) * 4;
1607 if (ramsize > 0) {
1608 u32 rxspace;
1609
1610 netdev_dbg(sky2->netdev, "ram buffer %dK\n", ramsize);
1611 if (ramsize < 16)
1612 rxspace = ramsize / 2;
1613 else
1614 rxspace = 8 + (2*(ramsize - 16))/3;
1615
1616 sky2_ramset(hw, rxqaddr[port], 0, rxspace);
1617 sky2_ramset(hw, txqaddr[port], rxspace, ramsize - rxspace);
1618
1619 /* Make sure SyncQ is disabled */
1620 sky2_write8(hw, RB_ADDR(port == 0 ? Q_XS1 : Q_XS2, RB_CTRL),
1621 RB_RST_SET);
1622 }
1623
1624 sky2_qset(hw, txqaddr[port]);
1625
1626 /* This is copied from sk98lin 10.0.5.3; no one tells me about erratta's */
1627 if (hw->chip_id == CHIP_ID_YUKON_EX && hw->chip_rev == CHIP_REV_YU_EX_B0)
1628 sky2_write32(hw, Q_ADDR(txqaddr[port], Q_TEST), F_TX_CHK_AUTO_OFF);
1629
1630 /* Set almost empty threshold */
1631 if (hw->chip_id == CHIP_ID_YUKON_EC_U &&
1632 hw->chip_rev == CHIP_REV_YU_EC_U_A0)
1633 sky2_write16(hw, Q_ADDR(txqaddr[port], Q_AL), ECU_TXFF_LEV);
1634
1635 sky2_prefetch_init(hw, txqaddr[port], sky2->tx_le_map,
1636 sky2->tx_ring_size - 1);
1637
1638 #ifdef SKY2_VLAN_TAG_USED
1639 sky2_set_vlan_mode(hw, port, sky2->vlgrp != NULL);
1640 #endif
1641
1642 sky2_rx_start(sky2);
1643 }
1644
1645 /* Bring up network interface. */
1646 static int sky2_up(struct net_device *dev)
1647 {
1648 struct sky2_port *sky2 = netdev_priv(dev);
1649 struct sky2_hw *hw = sky2->hw;
1650 unsigned port = sky2->port;
1651 u32 imask;
1652 int err;
1653
1654 netif_carrier_off(dev);
1655
1656 err = sky2_alloc_buffers(sky2);
1657 if (err)
1658 goto err_out;
1659
1660 sky2_hw_up(sky2);
1661
1662 /* Enable interrupts from phy/mac for port */
1663 imask = sky2_read32(hw, B0_IMSK);
1664 imask |= portirq_msk[port];
1665 sky2_write32(hw, B0_IMSK, imask);
1666 sky2_read32(hw, B0_IMSK);
1667
1668 netif_info(sky2, ifup, dev, "enabling interface\n");
1669
1670 return 0;
1671
1672 err_out:
1673 sky2_free_buffers(sky2);
1674 return err;
1675 }
1676
1677 /* Modular subtraction in ring */
1678 static inline int tx_inuse(const struct sky2_port *sky2)
1679 {
1680 return (sky2->tx_prod - sky2->tx_cons) & (sky2->tx_ring_size - 1);
1681 }
1682
1683 /* Number of list elements available for next tx */
1684 static inline int tx_avail(const struct sky2_port *sky2)
1685 {
1686 return sky2->tx_pending - tx_inuse(sky2);
1687 }
1688
1689 /* Estimate of number of transmit list elements required */
1690 static unsigned tx_le_req(const struct sk_buff *skb)
1691 {
1692 unsigned count;
1693
1694 count = (skb_shinfo(skb)->nr_frags + 1)
1695 * (sizeof(dma_addr_t) / sizeof(u32));
1696
1697 if (skb_is_gso(skb))
1698 ++count;
1699 else if (sizeof(dma_addr_t) == sizeof(u32))
1700 ++count; /* possible vlan */
1701
1702 if (skb->ip_summed == CHECKSUM_PARTIAL)
1703 ++count;
1704
1705 return count;
1706 }
1707
1708 static void sky2_tx_unmap(struct pci_dev *pdev, struct tx_ring_info *re)
1709 {
1710 if (re->flags & TX_MAP_SINGLE)
1711 pci_unmap_single(pdev, dma_unmap_addr(re, mapaddr),
1712 dma_unmap_len(re, maplen),
1713 PCI_DMA_TODEVICE);
1714 else if (re->flags & TX_MAP_PAGE)
1715 pci_unmap_page(pdev, dma_unmap_addr(re, mapaddr),
1716 dma_unmap_len(re, maplen),
1717 PCI_DMA_TODEVICE);
1718 re->flags = 0;
1719 }
1720
1721 /*
1722 * Put one packet in ring for transmit.
1723 * A single packet can generate multiple list elements, and
1724 * the number of ring elements will probably be less than the number
1725 * of list elements used.
1726 */
1727 static netdev_tx_t sky2_xmit_frame(struct sk_buff *skb,
1728 struct net_device *dev)
1729 {
1730 struct sky2_port *sky2 = netdev_priv(dev);
1731 struct sky2_hw *hw = sky2->hw;
1732 struct sky2_tx_le *le = NULL;
1733 struct tx_ring_info *re;
1734 unsigned i, len;
1735 dma_addr_t mapping;
1736 u32 upper;
1737 u16 slot;
1738 u16 mss;
1739 u8 ctrl;
1740
1741 if (unlikely(tx_avail(sky2) < tx_le_req(skb)))
1742 return NETDEV_TX_BUSY;
1743
1744 len = skb_headlen(skb);
1745 mapping = pci_map_single(hw->pdev, skb->data, len, PCI_DMA_TODEVICE);
1746
1747 if (pci_dma_mapping_error(hw->pdev, mapping))
1748 goto mapping_error;
1749
1750 slot = sky2->tx_prod;
1751 netif_printk(sky2, tx_queued, KERN_DEBUG, dev,
1752 "tx queued, slot %u, len %d\n", slot, skb->len);
1753
1754 /* Send high bits if needed */
1755 upper = upper_32_bits(mapping);
1756 if (upper != sky2->tx_last_upper) {
1757 le = get_tx_le(sky2, &slot);
1758 le->addr = cpu_to_le32(upper);
1759 sky2->tx_last_upper = upper;
1760 le->opcode = OP_ADDR64 | HW_OWNER;
1761 }
1762
1763 /* Check for TCP Segmentation Offload */
1764 mss = skb_shinfo(skb)->gso_size;
1765 if (mss != 0) {
1766
1767 if (!(hw->flags & SKY2_HW_NEW_LE))
1768 mss += ETH_HLEN + ip_hdrlen(skb) + tcp_hdrlen(skb);
1769
1770 if (mss != sky2->tx_last_mss) {
1771 le = get_tx_le(sky2, &slot);
1772 le->addr = cpu_to_le32(mss);
1773
1774 if (hw->flags & SKY2_HW_NEW_LE)
1775 le->opcode = OP_MSS | HW_OWNER;
1776 else
1777 le->opcode = OP_LRGLEN | HW_OWNER;
1778 sky2->tx_last_mss = mss;
1779 }
1780 }
1781
1782 ctrl = 0;
1783 #ifdef SKY2_VLAN_TAG_USED
1784 /* Add VLAN tag, can piggyback on LRGLEN or ADDR64 */
1785 if (sky2->vlgrp && vlan_tx_tag_present(skb)) {
1786 if (!le) {
1787 le = get_tx_le(sky2, &slot);
1788 le->addr = 0;
1789 le->opcode = OP_VLAN|HW_OWNER;
1790 } else
1791 le->opcode |= OP_VLAN;
1792 le->length = cpu_to_be16(vlan_tx_tag_get(skb));
1793 ctrl |= INS_VLAN;
1794 }
1795 #endif
1796
1797 /* Handle TCP checksum offload */
1798 if (skb->ip_summed == CHECKSUM_PARTIAL) {
1799 /* On Yukon EX (some versions) encoding change. */
1800 if (hw->flags & SKY2_HW_AUTO_TX_SUM)
1801 ctrl |= CALSUM; /* auto checksum */
1802 else {
1803 const unsigned offset = skb_transport_offset(skb);
1804 u32 tcpsum;
1805
1806 tcpsum = offset << 16; /* sum start */
1807 tcpsum |= offset + skb->csum_offset; /* sum write */
1808
1809 ctrl |= CALSUM | WR_SUM | INIT_SUM | LOCK_SUM;
1810 if (ip_hdr(skb)->protocol == IPPROTO_UDP)
1811 ctrl |= UDPTCP;
1812
1813 if (tcpsum != sky2->tx_tcpsum) {
1814 sky2->tx_tcpsum = tcpsum;
1815
1816 le = get_tx_le(sky2, &slot);
1817 le->addr = cpu_to_le32(tcpsum);
1818 le->length = 0; /* initial checksum value */
1819 le->ctrl = 1; /* one packet */
1820 le->opcode = OP_TCPLISW | HW_OWNER;
1821 }
1822 }
1823 }
1824
1825 re = sky2->tx_ring + slot;
1826 re->flags = TX_MAP_SINGLE;
1827 dma_unmap_addr_set(re, mapaddr, mapping);
1828 dma_unmap_len_set(re, maplen, len);
1829
1830 le = get_tx_le(sky2, &slot);
1831 le->addr = cpu_to_le32(lower_32_bits(mapping));
1832 le->length = cpu_to_le16(len);
1833 le->ctrl = ctrl;
1834 le->opcode = mss ? (OP_LARGESEND | HW_OWNER) : (OP_PACKET | HW_OWNER);
1835
1836
1837 for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) {
1838 const skb_frag_t *frag = &skb_shinfo(skb)->frags[i];
1839
1840 mapping = pci_map_page(hw->pdev, frag->page, frag->page_offset,
1841 frag->size, PCI_DMA_TODEVICE);
1842
1843 if (pci_dma_mapping_error(hw->pdev, mapping))
1844 goto mapping_unwind;
1845
1846 upper = upper_32_bits(mapping);
1847 if (upper != sky2->tx_last_upper) {
1848 le = get_tx_le(sky2, &slot);
1849 le->addr = cpu_to_le32(upper);
1850 sky2->tx_last_upper = upper;
1851 le->opcode = OP_ADDR64 | HW_OWNER;
1852 }
1853
1854 re = sky2->tx_ring + slot;
1855 re->flags = TX_MAP_PAGE;
1856 dma_unmap_addr_set(re, mapaddr, mapping);
1857 dma_unmap_len_set(re, maplen, frag->size);
1858
1859 le = get_tx_le(sky2, &slot);
1860 le->addr = cpu_to_le32(lower_32_bits(mapping));
1861 le->length = cpu_to_le16(frag->size);
1862 le->ctrl = ctrl;
1863 le->opcode = OP_BUFFER | HW_OWNER;
1864 }
1865
1866 re->skb = skb;
1867 le->ctrl |= EOP;
1868
1869 sky2->tx_prod = slot;
1870
1871 if (tx_avail(sky2) <= MAX_SKB_TX_LE)
1872 netif_stop_queue(dev);
1873
1874 sky2_put_idx(hw, txqaddr[sky2->port], sky2->tx_prod);
1875
1876 return NETDEV_TX_OK;
1877
1878 mapping_unwind:
1879 for (i = sky2->tx_prod; i != slot; i = RING_NEXT(i, sky2->tx_ring_size)) {
1880 re = sky2->tx_ring + i;
1881
1882 sky2_tx_unmap(hw->pdev, re);
1883 }
1884
1885 mapping_error:
1886 if (net_ratelimit())
1887 dev_warn(&hw->pdev->dev, "%s: tx mapping error\n", dev->name);
1888 dev_kfree_skb(skb);
1889 return NETDEV_TX_OK;
1890 }
1891
1892 /*
1893 * Free ring elements from starting at tx_cons until "done"
1894 *
1895 * NB:
1896 * 1. The hardware will tell us about partial completion of multi-part
1897 * buffers so make sure not to free skb to early.
1898 * 2. This may run in parallel start_xmit because the it only
1899 * looks at the tail of the queue of FIFO (tx_cons), not
1900 * the head (tx_prod)
1901 */
1902 static void sky2_tx_complete(struct sky2_port *sky2, u16 done)
1903 {
1904 struct net_device *dev = sky2->netdev;
1905 unsigned idx;
1906
1907 BUG_ON(done >= sky2->tx_ring_size);
1908
1909 for (idx = sky2->tx_cons; idx != done;
1910 idx = RING_NEXT(idx, sky2->tx_ring_size)) {
1911 struct tx_ring_info *re = sky2->tx_ring + idx;
1912 struct sk_buff *skb = re->skb;
1913
1914 sky2_tx_unmap(sky2->hw->pdev, re);
1915
1916 if (skb) {
1917 netif_printk(sky2, tx_done, KERN_DEBUG, dev,
1918 "tx done %u\n", idx);
1919
1920 dev->stats.tx_packets++;
1921 dev->stats.tx_bytes += skb->len;
1922
1923 re->skb = NULL;
1924 dev_kfree_skb_any(skb);
1925
1926 sky2->tx_next = RING_NEXT(idx, sky2->tx_ring_size);
1927 }
1928 }
1929
1930 sky2->tx_cons = idx;
1931 smp_mb();
1932 }
1933
1934 static void sky2_tx_reset(struct sky2_hw *hw, unsigned port)
1935 {
1936 /* Disable Force Sync bit and Enable Alloc bit */
1937 sky2_write8(hw, SK_REG(port, TXA_CTRL),
1938 TXA_DIS_FSYNC | TXA_DIS_ALLOC | TXA_STOP_RC);
1939
1940 /* Stop Interval Timer and Limit Counter of Tx Arbiter */
1941 sky2_write32(hw, SK_REG(port, TXA_ITI_INI), 0L);
1942 sky2_write32(hw, SK_REG(port, TXA_LIM_INI), 0L);
1943
1944 /* Reset the PCI FIFO of the async Tx queue */
1945 sky2_write32(hw, Q_ADDR(txqaddr[port], Q_CSR),
1946 BMU_RST_SET | BMU_FIFO_RST);
1947
1948 /* Reset the Tx prefetch units */
1949 sky2_write32(hw, Y2_QADDR(txqaddr[port], PREF_UNIT_CTRL),
1950 PREF_UNIT_RST_SET);
1951
1952 sky2_write32(hw, RB_ADDR(txqaddr[port], RB_CTRL), RB_RST_SET);
1953 sky2_write8(hw, SK_REG(port, TX_GMF_CTRL_T), GMF_RST_SET);
1954 }
1955
1956 static void sky2_hw_down(struct sky2_port *sky2)
1957 {
1958 struct sky2_hw *hw = sky2->hw;
1959 unsigned port = sky2->port;
1960 u16 ctrl;
1961
1962 /* Force flow control off */
1963 sky2_write8(hw, SK_REG(port, GMAC_CTRL), GMC_PAUSE_OFF);
1964
1965 /* Stop transmitter */
1966 sky2_write32(hw, Q_ADDR(txqaddr[port], Q_CSR), BMU_STOP);
1967 sky2_read32(hw, Q_ADDR(txqaddr[port], Q_CSR));
1968
1969 sky2_write32(hw, RB_ADDR(txqaddr[port], RB_CTRL),
1970 RB_RST_SET | RB_DIS_OP_MD);
1971
1972 ctrl = gma_read16(hw, port, GM_GP_CTRL);
1973 ctrl &= ~(GM_GPCR_TX_ENA | GM_GPCR_RX_ENA);
1974 gma_write16(hw, port, GM_GP_CTRL, ctrl);
1975
1976 sky2_write8(hw, SK_REG(port, GPHY_CTRL), GPC_RST_SET);
1977
1978 /* Workaround shared GMAC reset */
1979 if (!(hw->chip_id == CHIP_ID_YUKON_XL && hw->chip_rev == 0 &&
1980 port == 0 && hw->dev[1] && netif_running(hw->dev[1])))
1981 sky2_write8(hw, SK_REG(port, GMAC_CTRL), GMC_RST_SET);
1982
1983 sky2_write8(hw, SK_REG(port, RX_GMF_CTRL_T), GMF_RST_SET);
1984
1985 /* Force any delayed status interrrupt and NAPI */
1986 sky2_write32(hw, STAT_LEV_TIMER_CNT, 0);
1987 sky2_write32(hw, STAT_TX_TIMER_CNT, 0);
1988 sky2_write32(hw, STAT_ISR_TIMER_CNT, 0);
1989 sky2_read8(hw, STAT_ISR_TIMER_CTRL);
1990
1991 sky2_rx_stop(sky2);
1992
1993 spin_lock_bh(&sky2->phy_lock);
1994 sky2_phy_power_down(hw, port);
1995 spin_unlock_bh(&sky2->phy_lock);
1996
1997 sky2_tx_reset(hw, port);
1998
1999 /* Free any pending frames stuck in HW queue */
2000 sky2_tx_complete(sky2, sky2->tx_prod);
2001 }
2002
2003 /* Network shutdown */
2004 static int sky2_down(struct net_device *dev)
2005 {
2006 struct sky2_port *sky2 = netdev_priv(dev);
2007 struct sky2_hw *hw = sky2->hw;
2008
2009 /* Never really got started! */
2010 if (!sky2->tx_le)
2011 return 0;
2012
2013 netif_info(sky2, ifdown, dev, "disabling interface\n");
2014
2015 /* Disable port IRQ */
2016 sky2_write32(hw, B0_IMSK,
2017 sky2_read32(hw, B0_IMSK) & ~portirq_msk[sky2->port]);
2018 sky2_read32(hw, B0_IMSK);
2019
2020 synchronize_irq(hw->pdev->irq);
2021 napi_synchronize(&hw->napi);
2022
2023 sky2_hw_down(sky2);
2024
2025 sky2_free_buffers(sky2);
2026
2027 return 0;
2028 }
2029
2030 static u16 sky2_phy_speed(const struct sky2_hw *hw, u16 aux)
2031 {
2032 if (hw->flags & SKY2_HW_FIBRE_PHY)
2033 return SPEED_1000;
2034
2035 if (!(hw->flags & SKY2_HW_GIGABIT)) {
2036 if (aux & PHY_M_PS_SPEED_100)
2037 return SPEED_100;
2038 else
2039 return SPEED_10;
2040 }
2041
2042 switch (aux & PHY_M_PS_SPEED_MSK) {
2043 case PHY_M_PS_SPEED_1000:
2044 return SPEED_1000;
2045 case PHY_M_PS_SPEED_100:
2046 return SPEED_100;
2047 default:
2048 return SPEED_10;
2049 }
2050 }
2051
2052 static void sky2_link_up(struct sky2_port *sky2)
2053 {
2054 struct sky2_hw *hw = sky2->hw;
2055 unsigned port = sky2->port;
2056 static const char *fc_name[] = {
2057 [FC_NONE] = "none",
2058 [FC_TX] = "tx",
2059 [FC_RX] = "rx",
2060 [FC_BOTH] = "both",
2061 };
2062
2063 sky2_enable_rx_tx(sky2);
2064
2065 gm_phy_write(hw, port, PHY_MARV_INT_MASK, PHY_M_DEF_MSK);
2066
2067 netif_carrier_on(sky2->netdev);
2068
2069 mod_timer(&hw->watchdog_timer, jiffies + 1);
2070
2071 /* Turn on link LED */
2072 sky2_write8(hw, SK_REG(port, LNK_LED_REG),
2073 LINKLED_ON | LINKLED_BLINK_OFF | LINKLED_LINKSYNC_OFF);
2074
2075 netif_info(sky2, link, sky2->netdev,
2076 "Link is up at %d Mbps, %s duplex, flow control %s\n",
2077 sky2->speed,
2078 sky2->duplex == DUPLEX_FULL ? "full" : "half",
2079 fc_name[sky2->flow_status]);
2080 }
2081
2082 static void sky2_link_down(struct sky2_port *sky2)
2083 {
2084 struct sky2_hw *hw = sky2->hw;
2085 unsigned port = sky2->port;
2086 u16 reg;
2087
2088 gm_phy_write(hw, port, PHY_MARV_INT_MASK, 0);
2089
2090 reg = gma_read16(hw, port, GM_GP_CTRL);
2091 reg &= ~(GM_GPCR_RX_ENA | GM_GPCR_TX_ENA);
2092 gma_write16(hw, port, GM_GP_CTRL, reg);
2093
2094 netif_carrier_off(sky2->netdev);
2095
2096 /* Turn off link LED */
2097 sky2_write8(hw, SK_REG(port, LNK_LED_REG), LINKLED_OFF);
2098
2099 netif_info(sky2, link, sky2->netdev, "Link is down\n");
2100
2101 sky2_phy_init(hw, port);
2102 }
2103
2104 static enum flow_control sky2_flow(int rx, int tx)
2105 {
2106 if (rx)
2107 return tx ? FC_BOTH : FC_RX;
2108 else
2109 return tx ? FC_TX : FC_NONE;
2110 }
2111
2112 static int sky2_autoneg_done(struct sky2_port *sky2, u16 aux)
2113 {
2114 struct sky2_hw *hw = sky2->hw;
2115 unsigned port = sky2->port;
2116 u16 advert, lpa;
2117
2118 advert = gm_phy_read(hw, port, PHY_MARV_AUNE_ADV);
2119 lpa = gm_phy_read(hw, port, PHY_MARV_AUNE_LP);
2120 if (lpa & PHY_M_AN_RF) {
2121 netdev_err(sky2->netdev, "remote fault\n");
2122 return -1;
2123 }
2124
2125 if (!(aux & PHY_M_PS_SPDUP_RES)) {
2126 netdev_err(sky2->netdev, "speed/duplex mismatch\n");
2127 return -1;
2128 }
2129
2130 sky2->speed = sky2_phy_speed(hw, aux);
2131 sky2->duplex = (aux & PHY_M_PS_FULL_DUP) ? DUPLEX_FULL : DUPLEX_HALF;
2132
2133 /* Since the pause result bits seem to in different positions on
2134 * different chips. look at registers.
2135 */
2136 if (hw->flags & SKY2_HW_FIBRE_PHY) {
2137 /* Shift for bits in fiber PHY */
2138 advert &= ~(ADVERTISE_PAUSE_CAP|ADVERTISE_PAUSE_ASYM);
2139 lpa &= ~(LPA_PAUSE_CAP|LPA_PAUSE_ASYM);
2140
2141 if (advert & ADVERTISE_1000XPAUSE)
2142 advert |= ADVERTISE_PAUSE_CAP;
2143 if (advert & ADVERTISE_1000XPSE_ASYM)
2144 advert |= ADVERTISE_PAUSE_ASYM;
2145 if (lpa & LPA_1000XPAUSE)
2146 lpa |= LPA_PAUSE_CAP;
2147 if (lpa & LPA_1000XPAUSE_ASYM)
2148 lpa |= LPA_PAUSE_ASYM;
2149 }
2150
2151 sky2->flow_status = FC_NONE;
2152 if (advert & ADVERTISE_PAUSE_CAP) {
2153 if (lpa & LPA_PAUSE_CAP)
2154 sky2->flow_status = FC_BOTH;
2155 else if (advert & ADVERTISE_PAUSE_ASYM)
2156 sky2->flow_status = FC_RX;
2157 } else if (advert & ADVERTISE_PAUSE_ASYM) {
2158 if ((lpa & LPA_PAUSE_CAP) && (lpa & LPA_PAUSE_ASYM))
2159 sky2->flow_status = FC_TX;
2160 }
2161
2162 if (sky2->duplex == DUPLEX_HALF && sky2->speed < SPEED_1000 &&
2163 !(hw->chip_id == CHIP_ID_YUKON_EC_U || hw->chip_id == CHIP_ID_YUKON_EX))
2164 sky2->flow_status = FC_NONE;
2165
2166 if (sky2->flow_status & FC_TX)
2167 sky2_write8(hw, SK_REG(port, GMAC_CTRL), GMC_PAUSE_ON);
2168 else
2169 sky2_write8(hw, SK_REG(port, GMAC_CTRL), GMC_PAUSE_OFF);
2170
2171 return 0;
2172 }
2173
2174 /* Interrupt from PHY */
2175 static void sky2_phy_intr(struct sky2_hw *hw, unsigned port)
2176 {
2177 struct net_device *dev = hw->dev[port];
2178 struct sky2_port *sky2 = netdev_priv(dev);
2179 u16 istatus, phystat;
2180
2181 if (!netif_running(dev))
2182 return;
2183
2184 spin_lock(&sky2->phy_lock);
2185 istatus = gm_phy_read(hw, port, PHY_MARV_INT_STAT);
2186 phystat = gm_phy_read(hw, port, PHY_MARV_PHY_STAT);
2187
2188 netif_info(sky2, intr, sky2->netdev, "phy interrupt status 0x%x 0x%x\n",
2189 istatus, phystat);
2190
2191 if (istatus & PHY_M_IS_AN_COMPL) {
2192 if (sky2_autoneg_done(sky2, phystat) == 0 &&
2193 !netif_carrier_ok(dev))
2194 sky2_link_up(sky2);
2195 goto out;
2196 }
2197
2198 if (istatus & PHY_M_IS_LSP_CHANGE)
2199 sky2->speed = sky2_phy_speed(hw, phystat);
2200
2201 if (istatus & PHY_M_IS_DUP_CHANGE)
2202 sky2->duplex =
2203 (phystat & PHY_M_PS_FULL_DUP) ? DUPLEX_FULL : DUPLEX_HALF;
2204
2205 if (istatus & PHY_M_IS_LST_CHANGE) {
2206 if (phystat & PHY_M_PS_LINK_UP)
2207 sky2_link_up(sky2);
2208 else
2209 sky2_link_down(sky2);
2210 }
2211 out:
2212 spin_unlock(&sky2->phy_lock);
2213 }
2214
2215 /* Special quick link interrupt (Yukon-2 Optima only) */
2216 static void sky2_qlink_intr(struct sky2_hw *hw)
2217 {
2218 struct sky2_port *sky2 = netdev_priv(hw->dev[0]);
2219 u32 imask;
2220 u16 phy;
2221
2222 /* disable irq */
2223 imask = sky2_read32(hw, B0_IMSK);
2224 imask &= ~Y2_IS_PHY_QLNK;
2225 sky2_write32(hw, B0_IMSK, imask);
2226
2227 /* reset PHY Link Detect */
2228 phy = sky2_pci_read16(hw, PSM_CONFIG_REG4);
2229 sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON);
2230 sky2_pci_write16(hw, PSM_CONFIG_REG4, phy | 1);
2231 sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
2232
2233 sky2_link_up(sky2);
2234 }
2235
2236 /* Transmit timeout is only called if we are running, carrier is up
2237 * and tx queue is full (stopped).
2238 */
2239 static void sky2_tx_timeout(struct net_device *dev)
2240 {
2241 struct sky2_port *sky2 = netdev_priv(dev);
2242 struct sky2_hw *hw = sky2->hw;
2243
2244 netif_err(sky2, timer, dev, "tx timeout\n");
2245
2246 netdev_printk(KERN_DEBUG, dev, "transmit ring %u .. %u report=%u done=%u\n",
2247 sky2->tx_cons, sky2->tx_prod,
2248 sky2_read16(hw, sky2->port == 0 ? STAT_TXA1_RIDX : STAT_TXA2_RIDX),
2249 sky2_read16(hw, Q_ADDR(txqaddr[sky2->port], Q_DONE)));
2250
2251 /* can't restart safely under softirq */
2252 schedule_work(&hw->restart_work);
2253 }
2254
2255 static int sky2_change_mtu(struct net_device *dev, int new_mtu)
2256 {
2257 struct sky2_port *sky2 = netdev_priv(dev);
2258 struct sky2_hw *hw = sky2->hw;
2259 unsigned port = sky2->port;
2260 int err;
2261 u16 ctl, mode;
2262 u32 imask;
2263
2264 /* MTU size outside the spec */
2265 if (new_mtu < ETH_ZLEN || new_mtu > ETH_JUMBO_MTU)
2266 return -EINVAL;
2267
2268 /* MTU > 1500 on yukon FE and FE+ not allowed */
2269 if (new_mtu > ETH_DATA_LEN &&
2270 (hw->chip_id == CHIP_ID_YUKON_FE ||
2271 hw->chip_id == CHIP_ID_YUKON_FE_P))
2272 return -EINVAL;
2273
2274 /* TSO, etc on Yukon Ultra and MTU > 1500 not supported */
2275 if (new_mtu > ETH_DATA_LEN && hw->chip_id == CHIP_ID_YUKON_EC_U)
2276 dev->features &= ~(NETIF_F_TSO|NETIF_F_SG|NETIF_F_ALL_CSUM);
2277
2278 if (!netif_running(dev)) {
2279 dev->mtu = new_mtu;
2280 return 0;
2281 }
2282
2283 imask = sky2_read32(hw, B0_IMSK);
2284 sky2_write32(hw, B0_IMSK, 0);
2285
2286 dev->trans_start = jiffies; /* prevent tx timeout */
2287 napi_disable(&hw->napi);
2288 netif_tx_disable(dev);
2289
2290 synchronize_irq(hw->pdev->irq);
2291
2292 if (!(hw->flags & SKY2_HW_RAM_BUFFER))
2293 sky2_set_tx_stfwd(hw, port);
2294
2295 ctl = gma_read16(hw, port, GM_GP_CTRL);
2296 gma_write16(hw, port, GM_GP_CTRL, ctl & ~GM_GPCR_RX_ENA);
2297 sky2_rx_stop(sky2);
2298 sky2_rx_clean(sky2);
2299
2300 dev->mtu = new_mtu;
2301
2302 mode = DATA_BLIND_VAL(DATA_BLIND_DEF) |
2303 GM_SMOD_VLAN_ENA | IPG_DATA_VAL(IPG_DATA_DEF);
2304
2305 if (dev->mtu > ETH_DATA_LEN)
2306 mode |= GM_SMOD_JUMBO_ENA;
2307
2308 gma_write16(hw, port, GM_SERIAL_MODE, mode);
2309
2310 sky2_write8(hw, RB_ADDR(rxqaddr[port], RB_CTRL), RB_ENA_OP_MD);
2311
2312 err = sky2_alloc_rx_skbs(sky2);
2313 if (!err)
2314 sky2_rx_start(sky2);
2315 else
2316 sky2_rx_clean(sky2);
2317 sky2_write32(hw, B0_IMSK, imask);
2318
2319 sky2_read32(hw, B0_Y2_SP_LISR);
2320 napi_enable(&hw->napi);
2321
2322 if (err)
2323 dev_close(dev);
2324 else {
2325 gma_write16(hw, port, GM_GP_CTRL, ctl);
2326
2327 netif_wake_queue(dev);
2328 }
2329
2330 return err;
2331 }
2332
2333 /* For small just reuse existing skb for next receive */
2334 static struct sk_buff *receive_copy(struct sky2_port *sky2,
2335 const struct rx_ring_info *re,
2336 unsigned length)
2337 {
2338 struct sk_buff *skb;
2339
2340 skb = netdev_alloc_skb_ip_align(sky2->netdev, length);
2341 if (likely(skb)) {
2342 pci_dma_sync_single_for_cpu(sky2->hw->pdev, re->data_addr,
2343 length, PCI_DMA_FROMDEVICE);
2344 skb_copy_from_linear_data(re->skb, skb->data, length);
2345 skb->ip_summed = re->skb->ip_summed;
2346 skb->csum = re->skb->csum;
2347 pci_dma_sync_single_for_device(sky2->hw->pdev, re->data_addr,
2348 length, PCI_DMA_FROMDEVICE);
2349 re->skb->ip_summed = CHECKSUM_NONE;
2350 skb_put(skb, length);
2351 }
2352 return skb;
2353 }
2354
2355 /* Adjust length of skb with fragments to match received data */
2356 static void skb_put_frags(struct sk_buff *skb, unsigned int hdr_space,
2357 unsigned int length)
2358 {
2359 int i, num_frags;
2360 unsigned int size;
2361
2362 /* put header into skb */
2363 size = min(length, hdr_space);
2364 skb->tail += size;
2365 skb->len += size;
2366 length -= size;
2367
2368 num_frags = skb_shinfo(skb)->nr_frags;
2369 for (i = 0; i < num_frags; i++) {
2370 skb_frag_t *frag = &skb_shinfo(skb)->frags[i];
2371
2372 if (length == 0) {
2373 /* don't need this page */
2374 __free_page(frag->page);
2375 --skb_shinfo(skb)->nr_frags;
2376 } else {
2377 size = min(length, (unsigned) PAGE_SIZE);
2378
2379 frag->size = size;
2380 skb->data_len += size;
2381 skb->truesize += size;
2382 skb->len += size;
2383 length -= size;
2384 }
2385 }
2386 }
2387
2388 /* Normal packet - take skb from ring element and put in a new one */
2389 static struct sk_buff *receive_new(struct sky2_port *sky2,
2390 struct rx_ring_info *re,
2391 unsigned int length)
2392 {
2393 struct sk_buff *skb;
2394 struct rx_ring_info nre;
2395 unsigned hdr_space = sky2->rx_data_size;
2396
2397 nre.skb = sky2_rx_alloc(sky2);
2398 if (unlikely(!nre.skb))
2399 goto nobuf;
2400
2401 if (sky2_rx_map_skb(sky2->hw->pdev, &nre, hdr_space))
2402 goto nomap;
2403
2404 skb = re->skb;
2405 sky2_rx_unmap_skb(sky2->hw->pdev, re);
2406 prefetch(skb->data);
2407 *re = nre;
2408
2409 if (skb_shinfo(skb)->nr_frags)
2410 skb_put_frags(skb, hdr_space, length);
2411 else
2412 skb_put(skb, length);
2413 return skb;
2414
2415 nomap:
2416 dev_kfree_skb(nre.skb);
2417 nobuf:
2418 return NULL;
2419 }
2420
2421 /*
2422 * Receive one packet.
2423 * For larger packets, get new buffer.
2424 */
2425 static struct sk_buff *sky2_receive(struct net_device *dev,
2426 u16 length, u32 status)
2427 {
2428 struct sky2_port *sky2 = netdev_priv(dev);
2429 struct rx_ring_info *re = sky2->rx_ring + sky2->rx_next;
2430 struct sk_buff *skb = NULL;
2431 u16 count = (status & GMR_FS_LEN) >> 16;
2432
2433 #ifdef SKY2_VLAN_TAG_USED
2434 /* Account for vlan tag */
2435 if (sky2->vlgrp && (status & GMR_FS_VLAN))
2436 count -= VLAN_HLEN;
2437 #endif
2438
2439 netif_printk(sky2, rx_status, KERN_DEBUG, dev,
2440 "rx slot %u status 0x%x len %d\n",
2441 sky2->rx_next, status, length);
2442
2443 sky2->rx_next = (sky2->rx_next + 1) % sky2->rx_pending;
2444 prefetch(sky2->rx_ring + sky2->rx_next);
2445
2446 /* This chip has hardware problems that generates bogus status.
2447 * So do only marginal checking and expect higher level protocols
2448 * to handle crap frames.
2449 */
2450 if (sky2->hw->chip_id == CHIP_ID_YUKON_FE_P &&
2451 sky2->hw->chip_rev == CHIP_REV_YU_FE2_A0 &&
2452 length != count)
2453 goto okay;
2454
2455 if (status & GMR_FS_ANY_ERR)
2456 goto error;
2457
2458 if (!(status & GMR_FS_RX_OK))
2459 goto resubmit;
2460
2461 /* if length reported by DMA does not match PHY, packet was truncated */
2462 if (length != count)
2463 goto len_error;
2464
2465 okay:
2466 if (length < copybreak)
2467 skb = receive_copy(sky2, re, length);
2468 else
2469 skb = receive_new(sky2, re, length);
2470
2471 dev->stats.rx_dropped += (skb == NULL);
2472
2473 resubmit:
2474 sky2_rx_submit(sky2, re);
2475
2476 return skb;
2477
2478 len_error:
2479 /* Truncation of overlength packets
2480 causes PHY length to not match MAC length */
2481 ++dev->stats.rx_length_errors;
2482 if (net_ratelimit())
2483 netif_info(sky2, rx_err, dev,
2484 "rx length error: status %#x length %d\n",
2485 status, length);
2486 goto resubmit;
2487
2488 error:
2489 ++dev->stats.rx_errors;
2490 if (status & GMR_FS_RX_FF_OV) {
2491 dev->stats.rx_over_errors++;
2492 goto resubmit;
2493 }
2494
2495 if (net_ratelimit())
2496 netif_info(sky2, rx_err, dev,
2497 "rx error, status 0x%x length %d\n", status, length);
2498
2499 if (status & (GMR_FS_LONG_ERR | GMR_FS_UN_SIZE))
2500 dev->stats.rx_length_errors++;
2501 if (status & GMR_FS_FRAGMENT)
2502 dev->stats.rx_frame_errors++;
2503 if (status & GMR_FS_CRC_ERR)
2504 dev->stats.rx_crc_errors++;
2505
2506 goto resubmit;
2507 }
2508
2509 /* Transmit complete */
2510 static inline void sky2_tx_done(struct net_device *dev, u16 last)
2511 {
2512 struct sky2_port *sky2 = netdev_priv(dev);
2513
2514 if (netif_running(dev)) {
2515 sky2_tx_complete(sky2, last);
2516
2517 /* Wake unless it's detached, and called e.g. from sky2_down() */
2518 if (tx_avail(sky2) > MAX_SKB_TX_LE + 4)
2519 netif_wake_queue(dev);
2520 }
2521 }
2522
2523 static inline void sky2_skb_rx(const struct sky2_port *sky2,
2524 u32 status, struct sk_buff *skb)
2525 {
2526 #ifdef SKY2_VLAN_TAG_USED
2527 u16 vlan_tag = be16_to_cpu(sky2->rx_tag);
2528 if (sky2->vlgrp && (status & GMR_FS_VLAN)) {
2529 if (skb->ip_summed == CHECKSUM_NONE)
2530 vlan_hwaccel_receive_skb(skb, sky2->vlgrp, vlan_tag);
2531 else
2532 vlan_gro_receive(&sky2->hw->napi, sky2->vlgrp,
2533 vlan_tag, skb);
2534 return;
2535 }
2536 #endif
2537 if (skb->ip_summed == CHECKSUM_NONE)
2538 netif_receive_skb(skb);
2539 else
2540 napi_gro_receive(&sky2->hw->napi, skb);
2541 }
2542
2543 static inline void sky2_rx_done(struct sky2_hw *hw, unsigned port,
2544 unsigned packets, unsigned bytes)
2545 {
2546 if (packets) {
2547 struct net_device *dev = hw->dev[port];
2548
2549 dev->stats.rx_packets += packets;
2550 dev->stats.rx_bytes += bytes;
2551 dev->last_rx = jiffies;
2552 sky2_rx_update(netdev_priv(dev), rxqaddr[port]);
2553 }
2554 }
2555
2556 static void sky2_rx_checksum(struct sky2_port *sky2, u32 status)
2557 {
2558 /* If this happens then driver assuming wrong format for chip type */
2559 BUG_ON(sky2->hw->flags & SKY2_HW_NEW_LE);
2560
2561 /* Both checksum counters are programmed to start at
2562 * the same offset, so unless there is a problem they
2563 * should match. This failure is an early indication that
2564 * hardware receive checksumming won't work.
2565 */
2566 if (likely((u16)(status >> 16) == (u16)status)) {
2567 struct sk_buff *skb = sky2->rx_ring[sky2->rx_next].skb;
2568 skb->ip_summed = CHECKSUM_COMPLETE;
2569 skb->csum = le16_to_cpu(status);
2570 } else {
2571 dev_notice(&sky2->hw->pdev->dev,
2572 "%s: receive checksum problem (status = %#x)\n",
2573 sky2->netdev->name, status);
2574
2575 /* Disable checksum offload */
2576 sky2->flags &= ~SKY2_FLAG_RX_CHECKSUM;
2577 sky2_write32(sky2->hw, Q_ADDR(rxqaddr[sky2->port], Q_CSR),
2578 BMU_DIS_RX_CHKSUM);
2579 }
2580 }
2581
2582 static void sky2_rx_hash(struct sky2_port *sky2, u32 status)
2583 {
2584 struct sk_buff *skb;
2585
2586 skb = sky2->rx_ring[sky2->rx_next].skb;
2587 skb->rxhash = le32_to_cpu(status);
2588 }
2589
2590 /* Process status response ring */
2591 static int sky2_status_intr(struct sky2_hw *hw, int to_do, u16 idx)
2592 {
2593 int work_done = 0;
2594 unsigned int total_bytes[2] = { 0 };
2595 unsigned int total_packets[2] = { 0 };
2596
2597 rmb();
2598 do {
2599 struct sky2_port *sky2;
2600 struct sky2_status_le *le = hw->st_le + hw->st_idx;
2601 unsigned port;
2602 struct net_device *dev;
2603 struct sk_buff *skb;
2604 u32 status;
2605 u16 length;
2606 u8 opcode = le->opcode;
2607
2608 if (!(opcode & HW_OWNER))
2609 break;
2610
2611 hw->st_idx = RING_NEXT(hw->st_idx, hw->st_size);
2612
2613 port = le->css & CSS_LINK_BIT;
2614 dev = hw->dev[port];
2615 sky2 = netdev_priv(dev);
2616 length = le16_to_cpu(le->length);
2617 status = le32_to_cpu(le->status);
2618
2619 le->opcode = 0;
2620 switch (opcode & ~HW_OWNER) {
2621 case OP_RXSTAT:
2622 total_packets[port]++;
2623 total_bytes[port] += length;
2624
2625 skb = sky2_receive(dev, length, status);
2626 if (!skb)
2627 break;
2628
2629 /* This chip reports checksum status differently */
2630 if (hw->flags & SKY2_HW_NEW_LE) {
2631 if ((sky2->flags & SKY2_FLAG_RX_CHECKSUM) &&
2632 (le->css & (CSS_ISIPV4 | CSS_ISIPV6)) &&
2633 (le->css & CSS_TCPUDPCSOK))
2634 skb->ip_summed = CHECKSUM_UNNECESSARY;
2635 else
2636 skb->ip_summed = CHECKSUM_NONE;
2637 }
2638
2639 skb->protocol = eth_type_trans(skb, dev);
2640
2641 sky2_skb_rx(sky2, status, skb);
2642
2643 /* Stop after net poll weight */
2644 if (++work_done >= to_do)
2645 goto exit_loop;
2646 break;
2647
2648 #ifdef SKY2_VLAN_TAG_USED
2649 case OP_RXVLAN:
2650 sky2->rx_tag = length;
2651 break;
2652
2653 case OP_RXCHKSVLAN:
2654 sky2->rx_tag = length;
2655 /* fall through */
2656 #endif
2657 case OP_RXCHKS:
2658 if (likely(sky2->flags & SKY2_FLAG_RX_CHECKSUM))
2659 sky2_rx_checksum(sky2, status);
2660 break;
2661
2662 case OP_RSS_HASH:
2663 sky2_rx_hash(sky2, status);
2664 break;
2665
2666 case OP_TXINDEXLE:
2667 /* TX index reports status for both ports */
2668 sky2_tx_done(hw->dev[0], status & 0xfff);
2669 if (hw->dev[1])
2670 sky2_tx_done(hw->dev[1],
2671 ((status >> 24) & 0xff)
2672 | (u16)(length & 0xf) << 8);
2673 break;
2674
2675 default:
2676 if (net_ratelimit())
2677 pr_warning("unknown status opcode 0x%x\n", opcode);
2678 }
2679 } while (hw->st_idx != idx);
2680
2681 /* Fully processed status ring so clear irq */
2682 sky2_write32(hw, STAT_CTRL, SC_STAT_CLR_IRQ);
2683
2684 exit_loop:
2685 sky2_rx_done(hw, 0, total_packets[0], total_bytes[0]);
2686 sky2_rx_done(hw, 1, total_packets[1], total_bytes[1]);
2687
2688 return work_done;
2689 }
2690
2691 static void sky2_hw_error(struct sky2_hw *hw, unsigned port, u32 status)
2692 {
2693 struct net_device *dev = hw->dev[port];
2694
2695 if (net_ratelimit())
2696 netdev_info(dev, "hw error interrupt status 0x%x\n", status);
2697
2698 if (status & Y2_IS_PAR_RD1) {
2699 if (net_ratelimit())
2700 netdev_err(dev, "ram data read parity error\n");
2701 /* Clear IRQ */
2702 sky2_write16(hw, RAM_BUFFER(port, B3_RI_CTRL), RI_CLR_RD_PERR);
2703 }
2704
2705 if (status & Y2_IS_PAR_WR1) {
2706 if (net_ratelimit())
2707 netdev_err(dev, "ram data write parity error\n");
2708
2709 sky2_write16(hw, RAM_BUFFER(port, B3_RI_CTRL), RI_CLR_WR_PERR);
2710 }
2711
2712 if (status & Y2_IS_PAR_MAC1) {
2713 if (net_ratelimit())
2714 netdev_err(dev, "MAC parity error\n");
2715 sky2_write8(hw, SK_REG(port, TX_GMF_CTRL_T), GMF_CLI_TX_PE);
2716 }
2717
2718 if (status & Y2_IS_PAR_RX1) {
2719 if (net_ratelimit())
2720 netdev_err(dev, "RX parity error\n");
2721 sky2_write32(hw, Q_ADDR(rxqaddr[port], Q_CSR), BMU_CLR_IRQ_PAR);
2722 }
2723
2724 if (status & Y2_IS_TCP_TXA1) {
2725 if (net_ratelimit())
2726 netdev_err(dev, "TCP segmentation error\n");
2727 sky2_write32(hw, Q_ADDR(txqaddr[port], Q_CSR), BMU_CLR_IRQ_TCP);
2728 }
2729 }
2730
2731 static void sky2_hw_intr(struct sky2_hw *hw)
2732 {
2733 struct pci_dev *pdev = hw->pdev;
2734 u32 status = sky2_read32(hw, B0_HWE_ISRC);
2735 u32 hwmsk = sky2_read32(hw, B0_HWE_IMSK);
2736
2737 status &= hwmsk;
2738
2739 if (status & Y2_IS_TIST_OV)
2740 sky2_write8(hw, GMAC_TI_ST_CTRL, GMT_ST_CLR_IRQ);
2741
2742 if (status & (Y2_IS_MST_ERR | Y2_IS_IRQ_STAT)) {
2743 u16 pci_err;
2744
2745 sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON);
2746 pci_err = sky2_pci_read16(hw, PCI_STATUS);
2747 if (net_ratelimit())
2748 dev_err(&pdev->dev, "PCI hardware error (0x%x)\n",
2749 pci_err);
2750
2751 sky2_pci_write16(hw, PCI_STATUS,
2752 pci_err | PCI_STATUS_ERROR_BITS);
2753 sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
2754 }
2755
2756 if (status & Y2_IS_PCI_EXP) {
2757 /* PCI-Express uncorrectable Error occurred */
2758 u32 err;
2759
2760 sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON);
2761 err = sky2_read32(hw, Y2_CFG_AER + PCI_ERR_UNCOR_STATUS);
2762 sky2_write32(hw, Y2_CFG_AER + PCI_ERR_UNCOR_STATUS,
2763 0xfffffffful);
2764 if (net_ratelimit())
2765 dev_err(&pdev->dev, "PCI Express error (0x%x)\n", err);
2766
2767 sky2_read32(hw, Y2_CFG_AER + PCI_ERR_UNCOR_STATUS);
2768 sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
2769 }
2770
2771 if (status & Y2_HWE_L1_MASK)
2772 sky2_hw_error(hw, 0, status);
2773 status >>= 8;
2774 if (status & Y2_HWE_L1_MASK)
2775 sky2_hw_error(hw, 1, status);
2776 }
2777
2778 static void sky2_mac_intr(struct sky2_hw *hw, unsigned port)
2779 {
2780 struct net_device *dev = hw->dev[port];
2781 struct sky2_port *sky2 = netdev_priv(dev);
2782 u8 status = sky2_read8(hw, SK_REG(port, GMAC_IRQ_SRC));
2783
2784 netif_info(sky2, intr, dev, "mac interrupt status 0x%x\n", status);
2785
2786 if (status & GM_IS_RX_CO_OV)
2787 gma_read16(hw, port, GM_RX_IRQ_SRC);
2788
2789 if (status & GM_IS_TX_CO_OV)
2790 gma_read16(hw, port, GM_TX_IRQ_SRC);
2791
2792 if (status & GM_IS_RX_FF_OR) {
2793 ++dev->stats.rx_fifo_errors;
2794 sky2_write8(hw, SK_REG(port, RX_GMF_CTRL_T), GMF_CLI_RX_FO);
2795 }
2796
2797 if (status & GM_IS_TX_FF_UR) {
2798 ++dev->stats.tx_fifo_errors;
2799 sky2_write8(hw, SK_REG(port, TX_GMF_CTRL_T), GMF_CLI_TX_FU);
2800 }
2801 }
2802
2803 /* This should never happen it is a bug. */
2804 static void sky2_le_error(struct sky2_hw *hw, unsigned port, u16 q)
2805 {
2806 struct net_device *dev = hw->dev[port];
2807 u16 idx = sky2_read16(hw, Y2_QADDR(q, PREF_UNIT_GET_IDX));
2808
2809 dev_err(&hw->pdev->dev, "%s: descriptor error q=%#x get=%u put=%u\n",
2810 dev->name, (unsigned) q, (unsigned) idx,
2811 (unsigned) sky2_read16(hw, Y2_QADDR(q, PREF_UNIT_PUT_IDX)));
2812
2813 sky2_write32(hw, Q_ADDR(q, Q_CSR), BMU_CLR_IRQ_CHK);
2814 }
2815
2816 static int sky2_rx_hung(struct net_device *dev)
2817 {
2818 struct sky2_port *sky2 = netdev_priv(dev);
2819 struct sky2_hw *hw = sky2->hw;
2820 unsigned port = sky2->port;
2821 unsigned rxq = rxqaddr[port];
2822 u32 mac_rp = sky2_read32(hw, SK_REG(port, RX_GMF_RP));
2823 u8 mac_lev = sky2_read8(hw, SK_REG(port, RX_GMF_RLEV));
2824 u8 fifo_rp = sky2_read8(hw, Q_ADDR(rxq, Q_RP));
2825 u8 fifo_lev = sky2_read8(hw, Q_ADDR(rxq, Q_RL));
2826
2827 /* If idle and MAC or PCI is stuck */
2828 if (sky2->check.last == dev->last_rx &&
2829 ((mac_rp == sky2->check.mac_rp &&
2830 mac_lev != 0 && mac_lev >= sky2->check.mac_lev) ||
2831 /* Check if the PCI RX hang */
2832 (fifo_rp == sky2->check.fifo_rp &&
2833 fifo_lev != 0 && fifo_lev >= sky2->check.fifo_lev))) {
2834 netdev_printk(KERN_DEBUG, dev,
2835 "hung mac %d:%d fifo %d (%d:%d)\n",
2836 mac_lev, mac_rp, fifo_lev,
2837 fifo_rp, sky2_read8(hw, Q_ADDR(rxq, Q_WP)));
2838 return 1;
2839 } else {
2840 sky2->check.last = dev->last_rx;
2841 sky2->check.mac_rp = mac_rp;
2842 sky2->check.mac_lev = mac_lev;
2843 sky2->check.fifo_rp = fifo_rp;
2844 sky2->check.fifo_lev = fifo_lev;
2845 return 0;
2846 }
2847 }
2848
2849 static void sky2_watchdog(unsigned long arg)
2850 {
2851 struct sky2_hw *hw = (struct sky2_hw *) arg;
2852
2853 /* Check for lost IRQ once a second */
2854 if (sky2_read32(hw, B0_ISRC)) {
2855 napi_schedule(&hw->napi);
2856 } else {
2857 int i, active = 0;
2858
2859 for (i = 0; i < hw->ports; i++) {
2860 struct net_device *dev = hw->dev[i];
2861 if (!netif_running(dev))
2862 continue;
2863 ++active;
2864
2865 /* For chips with Rx FIFO, check if stuck */
2866 if ((hw->flags & SKY2_HW_RAM_BUFFER) &&
2867 sky2_rx_hung(dev)) {
2868 netdev_info(dev, "receiver hang detected\n");
2869 schedule_work(&hw->restart_work);
2870 return;
2871 }
2872 }
2873
2874 if (active == 0)
2875 return;
2876 }
2877
2878 mod_timer(&hw->watchdog_timer, round_jiffies(jiffies + HZ));
2879 }
2880
2881 /* Hardware/software error handling */
2882 static void sky2_err_intr(struct sky2_hw *hw, u32 status)
2883 {
2884 if (net_ratelimit())
2885 dev_warn(&hw->pdev->dev, "error interrupt status=%#x\n", status);
2886
2887 if (status & Y2_IS_HW_ERR)
2888 sky2_hw_intr(hw);
2889
2890 if (status & Y2_IS_IRQ_MAC1)
2891 sky2_mac_intr(hw, 0);
2892
2893 if (status & Y2_IS_IRQ_MAC2)
2894 sky2_mac_intr(hw, 1);
2895
2896 if (status & Y2_IS_CHK_RX1)
2897 sky2_le_error(hw, 0, Q_R1);
2898
2899 if (status & Y2_IS_CHK_RX2)
2900 sky2_le_error(hw, 1, Q_R2);
2901
2902 if (status & Y2_IS_CHK_TXA1)
2903 sky2_le_error(hw, 0, Q_XA1);
2904
2905 if (status & Y2_IS_CHK_TXA2)
2906 sky2_le_error(hw, 1, Q_XA2);
2907 }
2908
2909 static int sky2_poll(struct napi_struct *napi, int work_limit)
2910 {
2911 struct sky2_hw *hw = container_of(napi, struct sky2_hw, napi);
2912 u32 status = sky2_read32(hw, B0_Y2_SP_EISR);
2913 int work_done = 0;
2914 u16 idx;
2915
2916 if (unlikely(status & Y2_IS_ERROR))
2917 sky2_err_intr(hw, status);
2918
2919 if (status & Y2_IS_IRQ_PHY1)
2920 sky2_phy_intr(hw, 0);
2921
2922 if (status & Y2_IS_IRQ_PHY2)
2923 sky2_phy_intr(hw, 1);
2924
2925 if (status & Y2_IS_PHY_QLNK)
2926 sky2_qlink_intr(hw);
2927
2928 while ((idx = sky2_read16(hw, STAT_PUT_IDX)) != hw->st_idx) {
2929 work_done += sky2_status_intr(hw, work_limit - work_done, idx);
2930
2931 if (work_done >= work_limit)
2932 goto done;
2933 }
2934
2935 napi_complete(napi);
2936 sky2_read32(hw, B0_Y2_SP_LISR);
2937 done:
2938
2939 return work_done;
2940 }
2941
2942 static irqreturn_t sky2_intr(int irq, void *dev_id)
2943 {
2944 struct sky2_hw *hw = dev_id;
2945 u32 status;
2946
2947 /* Reading this mask interrupts as side effect */
2948 status = sky2_read32(hw, B0_Y2_SP_ISRC2);
2949 if (status == 0 || status == ~0)
2950 return IRQ_NONE;
2951
2952 prefetch(&hw->st_le[hw->st_idx]);
2953
2954 napi_schedule(&hw->napi);
2955
2956 return IRQ_HANDLED;
2957 }
2958
2959 #ifdef CONFIG_NET_POLL_CONTROLLER
2960 static void sky2_netpoll(struct net_device *dev)
2961 {
2962 struct sky2_port *sky2 = netdev_priv(dev);
2963
2964 napi_schedule(&sky2->hw->napi);
2965 }
2966 #endif
2967
2968 /* Chip internal frequency for clock calculations */
2969 static u32 sky2_mhz(const struct sky2_hw *hw)
2970 {
2971 switch (hw->chip_id) {
2972 case CHIP_ID_YUKON_EC:
2973 case CHIP_ID_YUKON_EC_U:
2974 case CHIP_ID_YUKON_EX:
2975 case CHIP_ID_YUKON_SUPR:
2976 case CHIP_ID_YUKON_UL_2:
2977 case CHIP_ID_YUKON_OPT:
2978 return 125;
2979
2980 case CHIP_ID_YUKON_FE:
2981 return 100;
2982
2983 case CHIP_ID_YUKON_FE_P:
2984 return 50;
2985
2986 case CHIP_ID_YUKON_XL:
2987 return 156;
2988
2989 default:
2990 BUG();
2991 }
2992 }
2993
2994 static inline u32 sky2_us2clk(const struct sky2_hw *hw, u32 us)
2995 {
2996 return sky2_mhz(hw) * us;
2997 }
2998
2999 static inline u32 sky2_clk2us(const struct sky2_hw *hw, u32 clk)
3000 {
3001 return clk / sky2_mhz(hw);
3002 }
3003
3004
3005 static int __devinit sky2_init(struct sky2_hw *hw)
3006 {
3007 u8 t8;
3008
3009 /* Enable all clocks and check for bad PCI access */
3010 sky2_pci_write32(hw, PCI_DEV_REG3, 0);
3011
3012 sky2_write8(hw, B0_CTST, CS_RST_CLR);
3013
3014 hw->chip_id = sky2_read8(hw, B2_CHIP_ID);
3015 hw->chip_rev = (sky2_read8(hw, B2_MAC_CFG) & CFG_CHIP_R_MSK) >> 4;
3016
3017 switch(hw->chip_id) {
3018 case CHIP_ID_YUKON_XL:
3019 hw->flags = SKY2_HW_GIGABIT | SKY2_HW_NEWER_PHY;
3020 if (hw->chip_rev < CHIP_REV_YU_XL_A2)
3021 hw->flags |= SKY2_HW_RSS_BROKEN;
3022 break;
3023
3024 case CHIP_ID_YUKON_EC_U:
3025 hw->flags = SKY2_HW_GIGABIT
3026 | SKY2_HW_NEWER_PHY
3027 | SKY2_HW_ADV_POWER_CTL;
3028 break;
3029
3030 case CHIP_ID_YUKON_EX:
3031 hw->flags = SKY2_HW_GIGABIT
3032 | SKY2_HW_NEWER_PHY
3033 | SKY2_HW_NEW_LE
3034 | SKY2_HW_ADV_POWER_CTL;
3035
3036 /* New transmit checksum */
3037 if (hw->chip_rev != CHIP_REV_YU_EX_B0)
3038 hw->flags |= SKY2_HW_AUTO_TX_SUM;
3039 break;
3040
3041 case CHIP_ID_YUKON_EC:
3042 /* This rev is really old, and requires untested workarounds */
3043 if (hw->chip_rev == CHIP_REV_YU_EC_A1) {
3044 dev_err(&hw->pdev->dev, "unsupported revision Yukon-EC rev A1\n");
3045 return -EOPNOTSUPP;
3046 }
3047 hw->flags = SKY2_HW_GIGABIT | SKY2_HW_RSS_BROKEN;
3048 break;
3049
3050 case CHIP_ID_YUKON_FE:
3051 hw->flags = SKY2_HW_RSS_BROKEN;
3052 break;
3053
3054 case CHIP_ID_YUKON_FE_P:
3055 hw->flags = SKY2_HW_NEWER_PHY
3056 | SKY2_HW_NEW_LE
3057 | SKY2_HW_AUTO_TX_SUM
3058 | SKY2_HW_ADV_POWER_CTL;
3059 break;
3060
3061 case CHIP_ID_YUKON_SUPR:
3062 hw->flags = SKY2_HW_GIGABIT
3063 | SKY2_HW_NEWER_PHY
3064 | SKY2_HW_NEW_LE
3065 | SKY2_HW_AUTO_TX_SUM
3066 | SKY2_HW_ADV_POWER_CTL;
3067 break;
3068
3069 case CHIP_ID_YUKON_UL_2:
3070 hw->flags = SKY2_HW_GIGABIT
3071 | SKY2_HW_ADV_POWER_CTL;
3072 break;
3073
3074 case CHIP_ID_YUKON_OPT:
3075 hw->flags = SKY2_HW_GIGABIT
3076 | SKY2_HW_NEW_LE
3077 | SKY2_HW_ADV_POWER_CTL;
3078 break;
3079
3080 default:
3081 dev_err(&hw->pdev->dev, "unsupported chip type 0x%x\n",
3082 hw->chip_id);
3083 return -EOPNOTSUPP;
3084 }
3085
3086 hw->pmd_type = sky2_read8(hw, B2_PMD_TYP);
3087 if (hw->pmd_type == 'L' || hw->pmd_type == 'S' || hw->pmd_type == 'P')
3088 hw->flags |= SKY2_HW_FIBRE_PHY;
3089
3090 hw->ports = 1;
3091 t8 = sky2_read8(hw, B2_Y2_HW_RES);
3092 if ((t8 & CFG_DUAL_MAC_MSK) == CFG_DUAL_MAC_MSK) {
3093 if (!(sky2_read8(hw, B2_Y2_CLK_GATE) & Y2_STATUS_LNK2_INAC))
3094 ++hw->ports;
3095 }
3096
3097 if (sky2_read8(hw, B2_E_0))
3098 hw->flags |= SKY2_HW_RAM_BUFFER;
3099
3100 return 0;
3101 }
3102
3103 static void sky2_reset(struct sky2_hw *hw)
3104 {
3105 struct pci_dev *pdev = hw->pdev;
3106 u16 status;
3107 int i, cap;
3108 u32 hwe_mask = Y2_HWE_ALL_MASK;
3109
3110 /* disable ASF */
3111 if (hw->chip_id == CHIP_ID_YUKON_EX
3112 || hw->chip_id == CHIP_ID_YUKON_SUPR) {
3113 sky2_write32(hw, CPU_WDOG, 0);
3114 status = sky2_read16(hw, HCU_CCSR);
3115 status &= ~(HCU_CCSR_AHB_RST | HCU_CCSR_CPU_RST_MODE |
3116 HCU_CCSR_UC_STATE_MSK);
3117 /*
3118 * CPU clock divider shouldn't be used because
3119 * - ASF firmware may malfunction
3120 * - Yukon-Supreme: Parallel FLASH doesn't support divided clocks
3121 */
3122 status &= ~HCU_CCSR_CPU_CLK_DIVIDE_MSK;
3123 sky2_write16(hw, HCU_CCSR, status);
3124 sky2_write32(hw, CPU_WDOG, 0);
3125 } else
3126 sky2_write8(hw, B28_Y2_ASF_STAT_CMD, Y2_ASF_RESET);
3127 sky2_write16(hw, B0_CTST, Y2_ASF_DISABLE);
3128
3129 /* do a SW reset */
3130 sky2_write8(hw, B0_CTST, CS_RST_SET);
3131 sky2_write8(hw, B0_CTST, CS_RST_CLR);
3132
3133 /* allow writes to PCI config */
3134 sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON);
3135
3136 /* clear PCI errors, if any */
3137 status = sky2_pci_read16(hw, PCI_STATUS);
3138 status |= PCI_STATUS_ERROR_BITS;
3139 sky2_pci_write16(hw, PCI_STATUS, status);
3140
3141 sky2_write8(hw, B0_CTST, CS_MRST_CLR);
3142
3143 cap = pci_find_capability(pdev, PCI_CAP_ID_EXP);
3144 if (cap) {
3145 sky2_write32(hw, Y2_CFG_AER + PCI_ERR_UNCOR_STATUS,
3146 0xfffffffful);
3147
3148 /* If error bit is stuck on ignore it */
3149 if (sky2_read32(hw, B0_HWE_ISRC) & Y2_IS_PCI_EXP)
3150 dev_info(&pdev->dev, "ignoring stuck error report bit\n");
3151 else
3152 hwe_mask |= Y2_IS_PCI_EXP;
3153 }
3154
3155 sky2_power_on(hw);
3156 sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
3157
3158 for (i = 0; i < hw->ports; i++) {
3159 sky2_write8(hw, SK_REG(i, GMAC_LINK_CTRL), GMLC_RST_SET);
3160 sky2_write8(hw, SK_REG(i, GMAC_LINK_CTRL), GMLC_RST_CLR);
3161
3162 if (hw->chip_id == CHIP_ID_YUKON_EX ||
3163 hw->chip_id == CHIP_ID_YUKON_SUPR)
3164 sky2_write16(hw, SK_REG(i, GMAC_CTRL),
3165 GMC_BYP_MACSECRX_ON | GMC_BYP_MACSECTX_ON
3166 | GMC_BYP_RETR_ON);
3167
3168 }
3169
3170 if (hw->chip_id == CHIP_ID_YUKON_SUPR && hw->chip_rev > CHIP_REV_YU_SU_B0) {
3171 /* enable MACSec clock gating */
3172 sky2_pci_write32(hw, PCI_DEV_REG3, P_CLK_MACSEC_DIS);
3173 }
3174
3175 if (hw->chip_id == CHIP_ID_YUKON_OPT) {
3176 u16 reg;
3177 u32 msk;
3178
3179 if (hw->chip_rev == 0) {
3180 /* disable PCI-E PHY power down (set PHY reg 0x80, bit 7 */
3181 sky2_write32(hw, Y2_PEX_PHY_DATA, (0x80UL << 16) | (1 << 7));
3182
3183 /* set PHY Link Detect Timer to 1.1 second (11x 100ms) */
3184 reg = 10;
3185 } else {
3186 /* set PHY Link Detect Timer to 0.4 second (4x 100ms) */
3187 reg = 3;
3188 }
3189
3190 reg <<= PSM_CONFIG_REG4_TIMER_PHY_LINK_DETECT_BASE;
3191
3192 /* reset PHY Link Detect */
3193 sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON);
3194 sky2_pci_write16(hw, PSM_CONFIG_REG4,
3195 reg | PSM_CONFIG_REG4_RST_PHY_LINK_DETECT);
3196 sky2_pci_write16(hw, PSM_CONFIG_REG4, reg);
3197
3198
3199 /* enable PHY Quick Link */
3200 msk = sky2_read32(hw, B0_IMSK);
3201 msk |= Y2_IS_PHY_QLNK;
3202 sky2_write32(hw, B0_IMSK, msk);
3203
3204 /* check if PSMv2 was running before */
3205 reg = sky2_pci_read16(hw, PSM_CONFIG_REG3);
3206 if (reg & PCI_EXP_LNKCTL_ASPMC) {
3207 cap = pci_find_capability(pdev, PCI_CAP_ID_EXP);
3208 /* restore the PCIe Link Control register */
3209 sky2_pci_write16(hw, cap + PCI_EXP_LNKCTL, reg);
3210 }
3211 sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
3212
3213 /* re-enable PEX PM in PEX PHY debug reg. 8 (clear bit 12) */
3214 sky2_write32(hw, Y2_PEX_PHY_DATA, PEX_DB_ACCESS | (0x08UL << 16));
3215 }
3216
3217 /* Clear I2C IRQ noise */
3218 sky2_write32(hw, B2_I2C_IRQ, 1);
3219
3220 /* turn off hardware timer (unused) */
3221 sky2_write8(hw, B2_TI_CTRL, TIM_STOP);
3222 sky2_write8(hw, B2_TI_CTRL, TIM_CLR_IRQ);
3223
3224 /* Turn off descriptor polling */
3225 sky2_write32(hw, B28_DPT_CTRL, DPT_STOP);
3226
3227 /* Turn off receive timestamp */
3228 sky2_write8(hw, GMAC_TI_ST_CTRL, GMT_ST_STOP);
3229 sky2_write8(hw, GMAC_TI_ST_CTRL, GMT_ST_CLR_IRQ);
3230
3231 /* enable the Tx Arbiters */
3232 for (i = 0; i < hw->ports; i++)
3233 sky2_write8(hw, SK_REG(i, TXA_CTRL), TXA_ENA_ARB);
3234
3235 /* Initialize ram interface */
3236 for (i = 0; i < hw->ports; i++) {
3237 sky2_write8(hw, RAM_BUFFER(i, B3_RI_CTRL), RI_RST_CLR);
3238
3239 sky2_write8(hw, RAM_BUFFER(i, B3_RI_WTO_R1), SK_RI_TO_53);
3240 sky2_write8(hw, RAM_BUFFER(i, B3_RI_WTO_XA1), SK_RI_TO_53);
3241 sky2_write8(hw, RAM_BUFFER(i, B3_RI_WTO_XS1), SK_RI_TO_53);
3242 sky2_write8(hw, RAM_BUFFER(i, B3_RI_RTO_R1), SK_RI_TO_53);
3243 sky2_write8(hw, RAM_BUFFER(i, B3_RI_RTO_XA1), SK_RI_TO_53);
3244 sky2_write8(hw, RAM_BUFFER(i, B3_RI_RTO_XS1), SK_RI_TO_53);
3245 sky2_write8(hw, RAM_BUFFER(i, B3_RI_WTO_R2), SK_RI_TO_53);
3246 sky2_write8(hw, RAM_BUFFER(i, B3_RI_WTO_XA2), SK_RI_TO_53);
3247 sky2_write8(hw, RAM_BUFFER(i, B3_RI_WTO_XS2), SK_RI_TO_53);
3248 sky2_write8(hw, RAM_BUFFER(i, B3_RI_RTO_R2), SK_RI_TO_53);
3249 sky2_write8(hw, RAM_BUFFER(i, B3_RI_RTO_XA2), SK_RI_TO_53);
3250 sky2_write8(hw, RAM_BUFFER(i, B3_RI_RTO_XS2), SK_RI_TO_53);
3251 }
3252
3253 sky2_write32(hw, B0_HWE_IMSK, hwe_mask);
3254
3255 for (i = 0; i < hw->ports; i++)
3256 sky2_gmac_reset(hw, i);
3257
3258 memset(hw->st_le, 0, hw->st_size * sizeof(struct sky2_status_le));
3259 hw->st_idx = 0;
3260
3261 sky2_write32(hw, STAT_CTRL, SC_STAT_RST_SET);
3262 sky2_write32(hw, STAT_CTRL, SC_STAT_RST_CLR);
3263
3264 sky2_write32(hw, STAT_LIST_ADDR_LO, hw->st_dma);
3265 sky2_write32(hw, STAT_LIST_ADDR_HI, (u64) hw->st_dma >> 32);
3266
3267 /* Set the list last index */
3268 sky2_write16(hw, STAT_LAST_IDX, hw->st_size - 1);
3269
3270 sky2_write16(hw, STAT_TX_IDX_TH, 10);
3271 sky2_write8(hw, STAT_FIFO_WM, 16);
3272
3273 /* set Status-FIFO ISR watermark */
3274 if (hw->chip_id == CHIP_ID_YUKON_XL && hw->chip_rev == 0)
3275 sky2_write8(hw, STAT_FIFO_ISR_WM, 4);
3276 else
3277 sky2_write8(hw, STAT_FIFO_ISR_WM, 16);
3278
3279 sky2_write32(hw, STAT_TX_TIMER_INI, sky2_us2clk(hw, 1000));
3280 sky2_write32(hw, STAT_ISR_TIMER_INI, sky2_us2clk(hw, 20));
3281 sky2_write32(hw, STAT_LEV_TIMER_INI, sky2_us2clk(hw, 100));
3282
3283 /* enable status unit */
3284 sky2_write32(hw, STAT_CTRL, SC_STAT_OP_ON);
3285
3286 sky2_write8(hw, STAT_TX_TIMER_CTRL, TIM_START);
3287 sky2_write8(hw, STAT_LEV_TIMER_CTRL, TIM_START);
3288 sky2_write8(hw, STAT_ISR_TIMER_CTRL, TIM_START);
3289 }
3290
3291 /* Take device down (offline).
3292 * Equivalent to doing dev_stop() but this does not
3293 * inform upper layers of the transistion.
3294 */
3295 static void sky2_detach(struct net_device *dev)
3296 {
3297 if (netif_running(dev)) {
3298 netif_tx_lock(dev);
3299 netif_device_detach(dev); /* stop txq */
3300 netif_tx_unlock(dev);
3301 sky2_down(dev);
3302 }
3303 }
3304
3305 /* Bring device back after doing sky2_detach */
3306 static int sky2_reattach(struct net_device *dev)
3307 {
3308 int err = 0;
3309
3310 if (netif_running(dev)) {
3311 err = sky2_up(dev);
3312 if (err) {
3313 netdev_info(dev, "could not restart %d\n", err);
3314 dev_close(dev);
3315 } else {
3316 netif_device_attach(dev);
3317 sky2_set_multicast(dev);
3318 }
3319 }
3320
3321 return err;
3322 }
3323
3324 static void sky2_all_down(struct sky2_hw *hw)
3325 {
3326 int i;
3327
3328 sky2_read32(hw, B0_IMSK);
3329 sky2_write32(hw, B0_IMSK, 0);
3330 synchronize_irq(hw->pdev->irq);
3331 napi_disable(&hw->napi);
3332
3333 for (i = 0; i < hw->ports; i++) {
3334 struct net_device *dev = hw->dev[i];
3335 struct sky2_port *sky2 = netdev_priv(dev);
3336
3337 if (!netif_running(dev))
3338 continue;
3339
3340 netif_carrier_off(dev);
3341 netif_tx_disable(dev);
3342 sky2_hw_down(sky2);
3343 }
3344 }
3345
3346 static void sky2_all_up(struct sky2_hw *hw)
3347 {
3348 u32 imask = Y2_IS_BASE;
3349 int i;
3350
3351 for (i = 0; i < hw->ports; i++) {
3352 struct net_device *dev = hw->dev[i];
3353 struct sky2_port *sky2 = netdev_priv(dev);
3354
3355 if (!netif_running(dev))
3356 continue;
3357
3358 sky2_hw_up(sky2);
3359 sky2_set_multicast(dev);
3360 imask |= portirq_msk[i];
3361 netif_wake_queue(dev);
3362 }
3363
3364 sky2_write32(hw, B0_IMSK, imask);
3365 sky2_read32(hw, B0_IMSK);
3366
3367 sky2_read32(hw, B0_Y2_SP_LISR);
3368 napi_enable(&hw->napi);
3369 }
3370
3371 static void sky2_restart(struct work_struct *work)
3372 {
3373 struct sky2_hw *hw = container_of(work, struct sky2_hw, restart_work);
3374
3375 rtnl_lock();
3376
3377 sky2_all_down(hw);
3378 sky2_reset(hw);
3379 sky2_all_up(hw);
3380
3381 rtnl_unlock();
3382 }
3383
3384 static inline u8 sky2_wol_supported(const struct sky2_hw *hw)
3385 {
3386 return sky2_is_copper(hw) ? (WAKE_PHY | WAKE_MAGIC) : 0;
3387 }
3388
3389 static void sky2_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
3390 {
3391 const struct sky2_port *sky2 = netdev_priv(dev);
3392
3393 wol->supported = sky2_wol_supported(sky2->hw);
3394 wol->wolopts = sky2->wol;
3395 }
3396
3397 static int sky2_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
3398 {
3399 struct sky2_port *sky2 = netdev_priv(dev);
3400 struct sky2_hw *hw = sky2->hw;
3401
3402 if ((wol->wolopts & ~sky2_wol_supported(sky2->hw)) ||
3403 !device_can_wakeup(&hw->pdev->dev))
3404 return -EOPNOTSUPP;
3405
3406 sky2->wol = wol->wolopts;
3407 return 0;
3408 }
3409
3410 static u32 sky2_supported_modes(const struct sky2_hw *hw)
3411 {
3412 if (sky2_is_copper(hw)) {
3413 u32 modes = SUPPORTED_10baseT_Half
3414 | SUPPORTED_10baseT_Full
3415 | SUPPORTED_100baseT_Half
3416 | SUPPORTED_100baseT_Full
3417 | SUPPORTED_Autoneg | SUPPORTED_TP;
3418
3419 if (hw->flags & SKY2_HW_GIGABIT)
3420 modes |= SUPPORTED_1000baseT_Half
3421 | SUPPORTED_1000baseT_Full;
3422 return modes;
3423 } else
3424 return SUPPORTED_1000baseT_Half
3425 | SUPPORTED_1000baseT_Full
3426 | SUPPORTED_Autoneg
3427 | SUPPORTED_FIBRE;
3428 }
3429
3430 static int sky2_get_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
3431 {
3432 struct sky2_port *sky2 = netdev_priv(dev);
3433 struct sky2_hw *hw = sky2->hw;
3434
3435 ecmd->transceiver = XCVR_INTERNAL;
3436 ecmd->supported = sky2_supported_modes(hw);
3437 ecmd->phy_address = PHY_ADDR_MARV;
3438 if (sky2_is_copper(hw)) {
3439 ecmd->port = PORT_TP;
3440 ecmd->speed = sky2->speed;
3441 } else {
3442 ecmd->speed = SPEED_1000;
3443 ecmd->port = PORT_FIBRE;
3444 }
3445
3446 ecmd->advertising = sky2->advertising;
3447 ecmd->autoneg = (sky2->flags & SKY2_FLAG_AUTO_SPEED)
3448 ? AUTONEG_ENABLE : AUTONEG_DISABLE;
3449 ecmd->duplex = sky2->duplex;
3450 return 0;
3451 }
3452
3453 static int sky2_set_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
3454 {
3455 struct sky2_port *sky2 = netdev_priv(dev);
3456 const struct sky2_hw *hw = sky2->hw;
3457 u32 supported = sky2_supported_modes(hw);
3458
3459 if (ecmd->autoneg == AUTONEG_ENABLE) {
3460 sky2->flags |= SKY2_FLAG_AUTO_SPEED;
3461 ecmd->advertising = supported;
3462 sky2->duplex = -1;
3463 sky2->speed = -1;
3464 } else {
3465 u32 setting;
3466
3467 switch (ecmd->speed) {
3468 case SPEED_1000:
3469 if (ecmd->duplex == DUPLEX_FULL)
3470 setting = SUPPORTED_1000baseT_Full;
3471 else if (ecmd->duplex == DUPLEX_HALF)
3472 setting = SUPPORTED_1000baseT_Half;
3473 else
3474 return -EINVAL;
3475 break;
3476 case SPEED_100:
3477 if (ecmd->duplex == DUPLEX_FULL)
3478 setting = SUPPORTED_100baseT_Full;
3479 else if (ecmd->duplex == DUPLEX_HALF)
3480 setting = SUPPORTED_100baseT_Half;
3481 else
3482 return -EINVAL;
3483 break;
3484
3485 case SPEED_10:
3486 if (ecmd->duplex == DUPLEX_FULL)
3487 setting = SUPPORTED_10baseT_Full;
3488 else if (ecmd->duplex == DUPLEX_HALF)
3489 setting = SUPPORTED_10baseT_Half;
3490 else
3491 return -EINVAL;
3492 break;
3493 default:
3494 return -EINVAL;
3495 }
3496
3497 if ((setting & supported) == 0)
3498 return -EINVAL;
3499
3500 sky2->speed = ecmd->speed;
3501 sky2->duplex = ecmd->duplex;
3502 sky2->flags &= ~SKY2_FLAG_AUTO_SPEED;
3503 }
3504
3505 sky2->advertising = ecmd->advertising;
3506
3507 if (netif_running(dev)) {
3508 sky2_phy_reinit(sky2);
3509 sky2_set_multicast(dev);
3510 }
3511
3512 return 0;
3513 }
3514
3515 static void sky2_get_drvinfo(struct net_device *dev,
3516 struct ethtool_drvinfo *info)
3517 {
3518 struct sky2_port *sky2 = netdev_priv(dev);
3519
3520 strcpy(info->driver, DRV_NAME);
3521 strcpy(info->version, DRV_VERSION);
3522 strcpy(info->fw_version, "N/A");
3523 strcpy(info->bus_info, pci_name(sky2->hw->pdev));
3524 }
3525
3526 static const struct sky2_stat {
3527 char name[ETH_GSTRING_LEN];
3528 u16 offset;
3529 } sky2_stats[] = {
3530 { "tx_bytes", GM_TXO_OK_HI },
3531 { "rx_bytes", GM_RXO_OK_HI },
3532 { "tx_broadcast", GM_TXF_BC_OK },
3533 { "rx_broadcast", GM_RXF_BC_OK },
3534 { "tx_multicast", GM_TXF_MC_OK },
3535 { "rx_multicast", GM_RXF_MC_OK },
3536 { "tx_unicast", GM_TXF_UC_OK },
3537 { "rx_unicast", GM_RXF_UC_OK },
3538 { "tx_mac_pause", GM_TXF_MPAUSE },
3539 { "rx_mac_pause", GM_RXF_MPAUSE },
3540 { "collisions", GM_TXF_COL },
3541 { "late_collision",GM_TXF_LAT_COL },
3542 { "aborted", GM_TXF_ABO_COL },
3543 { "single_collisions", GM_TXF_SNG_COL },
3544 { "multi_collisions", GM_TXF_MUL_COL },
3545
3546 { "rx_short", GM_RXF_SHT },
3547 { "rx_runt", GM_RXE_FRAG },
3548 { "rx_64_byte_packets", GM_RXF_64B },
3549 { "rx_65_to_127_byte_packets", GM_RXF_127B },
3550 { "rx_128_to_255_byte_packets", GM_RXF_255B },
3551 { "rx_256_to_511_byte_packets", GM_RXF_511B },
3552 { "rx_512_to_1023_byte_packets", GM_RXF_1023B },
3553 { "rx_1024_to_1518_byte_packets", GM_RXF_1518B },
3554 { "rx_1518_to_max_byte_packets", GM_RXF_MAX_SZ },
3555 { "rx_too_long", GM_RXF_LNG_ERR },
3556 { "rx_fifo_overflow", GM_RXE_FIFO_OV },
3557 { "rx_jabber", GM_RXF_JAB_PKT },
3558 { "rx_fcs_error", GM_RXF_FCS_ERR },
3559
3560 { "tx_64_byte_packets", GM_TXF_64B },
3561 { "tx_65_to_127_byte_packets", GM_TXF_127B },
3562 { "tx_128_to_255_byte_packets", GM_TXF_255B },
3563 { "tx_256_to_511_byte_packets", GM_TXF_511B },
3564 { "tx_512_to_1023_byte_packets", GM_TXF_1023B },
3565 { "tx_1024_to_1518_byte_packets", GM_TXF_1518B },
3566 { "tx_1519_to_max_byte_packets", GM_TXF_MAX_SZ },
3567 { "tx_fifo_underrun", GM_TXE_FIFO_UR },
3568 };
3569
3570 static u32 sky2_get_rx_csum(struct net_device *dev)
3571 {
3572 struct sky2_port *sky2 = netdev_priv(dev);
3573
3574 return !!(sky2->flags & SKY2_FLAG_RX_CHECKSUM);
3575 }
3576
3577 static int sky2_set_rx_csum(struct net_device *dev, u32 data)
3578 {
3579 struct sky2_port *sky2 = netdev_priv(dev);
3580
3581 if (data)
3582 sky2->flags |= SKY2_FLAG_RX_CHECKSUM;
3583 else
3584 sky2->flags &= ~SKY2_FLAG_RX_CHECKSUM;
3585
3586 sky2_write32(sky2->hw, Q_ADDR(rxqaddr[sky2->port], Q_CSR),
3587 data ? BMU_ENA_RX_CHKSUM : BMU_DIS_RX_CHKSUM);
3588
3589 return 0;
3590 }
3591
3592 static u32 sky2_get_msglevel(struct net_device *netdev)
3593 {
3594 struct sky2_port *sky2 = netdev_priv(netdev);
3595 return sky2->msg_enable;
3596 }
3597
3598 static int sky2_nway_reset(struct net_device *dev)
3599 {
3600 struct sky2_port *sky2 = netdev_priv(dev);
3601
3602 if (!netif_running(dev) || !(sky2->flags & SKY2_FLAG_AUTO_SPEED))
3603 return -EINVAL;
3604
3605 sky2_phy_reinit(sky2);
3606 sky2_set_multicast(dev);
3607
3608 return 0;
3609 }
3610
3611 static void sky2_phy_stats(struct sky2_port *sky2, u64 * data, unsigned count)
3612 {
3613 struct sky2_hw *hw = sky2->hw;
3614 unsigned port = sky2->port;
3615 int i;
3616
3617 data[0] = (u64) gma_read32(hw, port, GM_TXO_OK_HI) << 32
3618 | (u64) gma_read32(hw, port, GM_TXO_OK_LO);
3619 data[1] = (u64) gma_read32(hw, port, GM_RXO_OK_HI) << 32
3620 | (u64) gma_read32(hw, port, GM_RXO_OK_LO);
3621
3622 for (i = 2; i < count; i++)
3623 data[i] = (u64) gma_read32(hw, port, sky2_stats[i].offset);
3624 }
3625
3626 static void sky2_set_msglevel(struct net_device *netdev, u32 value)
3627 {
3628 struct sky2_port *sky2 = netdev_priv(netdev);
3629 sky2->msg_enable = value;
3630 }
3631
3632 static int sky2_get_sset_count(struct net_device *dev, int sset)
3633 {
3634 switch (sset) {
3635 case ETH_SS_STATS:
3636 return ARRAY_SIZE(sky2_stats);
3637 default:
3638 return -EOPNOTSUPP;
3639 }
3640 }
3641
3642 static void sky2_get_ethtool_stats(struct net_device *dev,
3643 struct ethtool_stats *stats, u64 * data)
3644 {
3645 struct sky2_port *sky2 = netdev_priv(dev);
3646
3647 sky2_phy_stats(sky2, data, ARRAY_SIZE(sky2_stats));
3648 }
3649
3650 static void sky2_get_strings(struct net_device *dev, u32 stringset, u8 * data)
3651 {
3652 int i;
3653
3654 switch (stringset) {
3655 case ETH_SS_STATS:
3656 for (i = 0; i < ARRAY_SIZE(sky2_stats); i++)
3657 memcpy(data + i * ETH_GSTRING_LEN,
3658 sky2_stats[i].name, ETH_GSTRING_LEN);
3659 break;
3660 }
3661 }
3662
3663 static int sky2_set_mac_address(struct net_device *dev, void *p)
3664 {
3665 struct sky2_port *sky2 = netdev_priv(dev);
3666 struct sky2_hw *hw = sky2->hw;
3667 unsigned port = sky2->port;
3668 const struct sockaddr *addr = p;
3669
3670 if (!is_valid_ether_addr(addr->sa_data))
3671 return -EADDRNOTAVAIL;
3672
3673 memcpy(dev->dev_addr, addr->sa_data, ETH_ALEN);
3674 memcpy_toio(hw->regs + B2_MAC_1 + port * 8,
3675 dev->dev_addr, ETH_ALEN);
3676 memcpy_toio(hw->regs + B2_MAC_2 + port * 8,
3677 dev->dev_addr, ETH_ALEN);
3678
3679 /* virtual address for data */
3680 gma_set_addr(hw, port, GM_SRC_ADDR_2L, dev->dev_addr);
3681
3682 /* physical address: used for pause frames */
3683 gma_set_addr(hw, port, GM_SRC_ADDR_1L, dev->dev_addr);
3684
3685 return 0;
3686 }
3687
3688 static void inline sky2_add_filter(u8 filter[8], const u8 *addr)
3689 {
3690 u32 bit;
3691
3692 bit = ether_crc(ETH_ALEN, addr) & 63;
3693 filter[bit >> 3] |= 1 << (bit & 7);
3694 }
3695
3696 static void sky2_set_multicast(struct net_device *dev)
3697 {
3698 struct sky2_port *sky2 = netdev_priv(dev);
3699 struct sky2_hw *hw = sky2->hw;
3700 unsigned port = sky2->port;
3701 struct netdev_hw_addr *ha;
3702 u16 reg;
3703 u8 filter[8];
3704 int rx_pause;
3705 static const u8 pause_mc_addr[ETH_ALEN] = { 0x1, 0x80, 0xc2, 0x0, 0x0, 0x1 };
3706
3707 rx_pause = (sky2->flow_status == FC_RX || sky2->flow_status == FC_BOTH);
3708 memset(filter, 0, sizeof(filter));
3709
3710 reg = gma_read16(hw, port, GM_RX_CTRL);
3711 reg |= GM_RXCR_UCF_ENA;
3712
3713 if (dev->flags & IFF_PROMISC) /* promiscuous */
3714 reg &= ~(GM_RXCR_UCF_ENA | GM_RXCR_MCF_ENA);
3715 else if (dev->flags & IFF_ALLMULTI)
3716 memset(filter, 0xff, sizeof(filter));
3717 else if (netdev_mc_empty(dev) && !rx_pause)
3718 reg &= ~GM_RXCR_MCF_ENA;
3719 else {
3720 reg |= GM_RXCR_MCF_ENA;
3721
3722 if (rx_pause)
3723 sky2_add_filter(filter, pause_mc_addr);
3724
3725 netdev_for_each_mc_addr(ha, dev)
3726 sky2_add_filter(filter, ha->addr);
3727 }
3728
3729 gma_write16(hw, port, GM_MC_ADDR_H1,
3730 (u16) filter[0] | ((u16) filter[1] << 8));
3731 gma_write16(hw, port, GM_MC_ADDR_H2,
3732 (u16) filter[2] | ((u16) filter[3] << 8));
3733 gma_write16(hw, port, GM_MC_ADDR_H3,
3734 (u16) filter[4] | ((u16) filter[5] << 8));
3735 gma_write16(hw, port, GM_MC_ADDR_H4,
3736 (u16) filter[6] | ((u16) filter[7] << 8));
3737
3738 gma_write16(hw, port, GM_RX_CTRL, reg);
3739 }
3740
3741 /* Can have one global because blinking is controlled by
3742 * ethtool and that is always under RTNL mutex
3743 */
3744 static void sky2_led(struct sky2_port *sky2, enum led_mode mode)
3745 {
3746 struct sky2_hw *hw = sky2->hw;
3747 unsigned port = sky2->port;
3748
3749 spin_lock_bh(&sky2->phy_lock);
3750 if (hw->chip_id == CHIP_ID_YUKON_EC_U ||
3751 hw->chip_id == CHIP_ID_YUKON_EX ||
3752 hw->chip_id == CHIP_ID_YUKON_SUPR) {
3753 u16 pg;
3754 pg = gm_phy_read(hw, port, PHY_MARV_EXT_ADR);
3755 gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 3);
3756
3757 switch (mode) {
3758 case MO_LED_OFF:
3759 gm_phy_write(hw, port, PHY_MARV_PHY_CTRL,
3760 PHY_M_LEDC_LOS_CTRL(8) |
3761 PHY_M_LEDC_INIT_CTRL(8) |
3762 PHY_M_LEDC_STA1_CTRL(8) |
3763 PHY_M_LEDC_STA0_CTRL(8));
3764 break;
3765 case MO_LED_ON:
3766 gm_phy_write(hw, port, PHY_MARV_PHY_CTRL,
3767 PHY_M_LEDC_LOS_CTRL(9) |
3768 PHY_M_LEDC_INIT_CTRL(9) |
3769 PHY_M_LEDC_STA1_CTRL(9) |
3770 PHY_M_LEDC_STA0_CTRL(9));
3771 break;
3772 case MO_LED_BLINK:
3773 gm_phy_write(hw, port, PHY_MARV_PHY_CTRL,
3774 PHY_M_LEDC_LOS_CTRL(0xa) |
3775 PHY_M_LEDC_INIT_CTRL(0xa) |
3776 PHY_M_LEDC_STA1_CTRL(0xa) |
3777 PHY_M_LEDC_STA0_CTRL(0xa));
3778 break;
3779 case MO_LED_NORM:
3780 gm_phy_write(hw, port, PHY_MARV_PHY_CTRL,
3781 PHY_M_LEDC_LOS_CTRL(1) |
3782 PHY_M_LEDC_INIT_CTRL(8) |
3783 PHY_M_LEDC_STA1_CTRL(7) |
3784 PHY_M_LEDC_STA0_CTRL(7));
3785 }
3786
3787 gm_phy_write(hw, port, PHY_MARV_EXT_ADR, pg);
3788 } else
3789 gm_phy_write(hw, port, PHY_MARV_LED_OVER,
3790 PHY_M_LED_MO_DUP(mode) |
3791 PHY_M_LED_MO_10(mode) |
3792 PHY_M_LED_MO_100(mode) |
3793 PHY_M_LED_MO_1000(mode) |
3794 PHY_M_LED_MO_RX(mode) |
3795 PHY_M_LED_MO_TX(mode));
3796
3797 spin_unlock_bh(&sky2->phy_lock);
3798 }
3799
3800 /* blink LED's for finding board */
3801 static int sky2_phys_id(struct net_device *dev, u32 data)
3802 {
3803 struct sky2_port *sky2 = netdev_priv(dev);
3804 unsigned int i;
3805
3806 if (data == 0)
3807 data = UINT_MAX;
3808
3809 for (i = 0; i < data; i++) {
3810 sky2_led(sky2, MO_LED_ON);
3811 if (msleep_interruptible(500))
3812 break;
3813 sky2_led(sky2, MO_LED_OFF);
3814 if (msleep_interruptible(500))
3815 break;
3816 }
3817 sky2_led(sky2, MO_LED_NORM);
3818
3819 return 0;
3820 }
3821
3822 static void sky2_get_pauseparam(struct net_device *dev,
3823 struct ethtool_pauseparam *ecmd)
3824 {
3825 struct sky2_port *sky2 = netdev_priv(dev);
3826
3827 switch (sky2->flow_mode) {
3828 case FC_NONE:
3829 ecmd->tx_pause = ecmd->rx_pause = 0;
3830 break;
3831 case FC_TX:
3832 ecmd->tx_pause = 1, ecmd->rx_pause = 0;
3833 break;
3834 case FC_RX:
3835 ecmd->tx_pause = 0, ecmd->rx_pause = 1;
3836 break;
3837 case FC_BOTH:
3838 ecmd->tx_pause = ecmd->rx_pause = 1;
3839 }
3840
3841 ecmd->autoneg = (sky2->flags & SKY2_FLAG_AUTO_PAUSE)
3842 ? AUTONEG_ENABLE : AUTONEG_DISABLE;
3843 }
3844
3845 static int sky2_set_pauseparam(struct net_device *dev,
3846 struct ethtool_pauseparam *ecmd)
3847 {
3848 struct sky2_port *sky2 = netdev_priv(dev);
3849
3850 if (ecmd->autoneg == AUTONEG_ENABLE)
3851 sky2->flags |= SKY2_FLAG_AUTO_PAUSE;
3852 else
3853 sky2->flags &= ~SKY2_FLAG_AUTO_PAUSE;
3854
3855 sky2->flow_mode = sky2_flow(ecmd->rx_pause, ecmd->tx_pause);
3856
3857 if (netif_running(dev))
3858 sky2_phy_reinit(sky2);
3859
3860 return 0;
3861 }
3862
3863 static int sky2_get_coalesce(struct net_device *dev,
3864 struct ethtool_coalesce *ecmd)
3865 {
3866 struct sky2_port *sky2 = netdev_priv(dev);
3867 struct sky2_hw *hw = sky2->hw;
3868
3869 if (sky2_read8(hw, STAT_TX_TIMER_CTRL) == TIM_STOP)
3870 ecmd->tx_coalesce_usecs = 0;
3871 else {
3872 u32 clks = sky2_read32(hw, STAT_TX_TIMER_INI);
3873 ecmd->tx_coalesce_usecs = sky2_clk2us(hw, clks);
3874 }
3875 ecmd->tx_max_coalesced_frames = sky2_read16(hw, STAT_TX_IDX_TH);
3876
3877 if (sky2_read8(hw, STAT_LEV_TIMER_CTRL) == TIM_STOP)
3878 ecmd->rx_coalesce_usecs = 0;
3879 else {
3880 u32 clks = sky2_read32(hw, STAT_LEV_TIMER_INI);
3881 ecmd->rx_coalesce_usecs = sky2_clk2us(hw, clks);
3882 }
3883 ecmd->rx_max_coalesced_frames = sky2_read8(hw, STAT_FIFO_WM);
3884
3885 if (sky2_read8(hw, STAT_ISR_TIMER_CTRL) == TIM_STOP)
3886 ecmd->rx_coalesce_usecs_irq = 0;
3887 else {
3888 u32 clks = sky2_read32(hw, STAT_ISR_TIMER_INI);
3889 ecmd->rx_coalesce_usecs_irq = sky2_clk2us(hw, clks);
3890 }
3891
3892 ecmd->rx_max_coalesced_frames_irq = sky2_read8(hw, STAT_FIFO_ISR_WM);
3893
3894 return 0;
3895 }
3896
3897 /* Note: this affect both ports */
3898 static int sky2_set_coalesce(struct net_device *dev,
3899 struct ethtool_coalesce *ecmd)
3900 {
3901 struct sky2_port *sky2 = netdev_priv(dev);
3902 struct sky2_hw *hw = sky2->hw;
3903 const u32 tmax = sky2_clk2us(hw, 0x0ffffff);
3904
3905 if (ecmd->tx_coalesce_usecs > tmax ||
3906 ecmd->rx_coalesce_usecs > tmax ||
3907 ecmd->rx_coalesce_usecs_irq > tmax)
3908 return -EINVAL;
3909
3910 if (ecmd->tx_max_coalesced_frames >= sky2->tx_ring_size-1)
3911 return -EINVAL;
3912 if (ecmd->rx_max_coalesced_frames > RX_MAX_PENDING)
3913 return -EINVAL;
3914 if (ecmd->rx_max_coalesced_frames_irq >RX_MAX_PENDING)
3915 return -EINVAL;
3916
3917 if (ecmd->tx_coalesce_usecs == 0)
3918 sky2_write8(hw, STAT_TX_TIMER_CTRL, TIM_STOP);
3919 else {
3920 sky2_write32(hw, STAT_TX_TIMER_INI,
3921 sky2_us2clk(hw, ecmd->tx_coalesce_usecs));
3922 sky2_write8(hw, STAT_TX_TIMER_CTRL, TIM_START);
3923 }
3924 sky2_write16(hw, STAT_TX_IDX_TH, ecmd->tx_max_coalesced_frames);
3925
3926 if (ecmd->rx_coalesce_usecs == 0)
3927 sky2_write8(hw, STAT_LEV_TIMER_CTRL, TIM_STOP);
3928 else {
3929 sky2_write32(hw, STAT_LEV_TIMER_INI,
3930 sky2_us2clk(hw, ecmd->rx_coalesce_usecs));
3931 sky2_write8(hw, STAT_LEV_TIMER_CTRL, TIM_START);
3932 }
3933 sky2_write8(hw, STAT_FIFO_WM, ecmd->rx_max_coalesced_frames);
3934
3935 if (ecmd->rx_coalesce_usecs_irq == 0)
3936 sky2_write8(hw, STAT_ISR_TIMER_CTRL, TIM_STOP);
3937 else {
3938 sky2_write32(hw, STAT_ISR_TIMER_INI,
3939 sky2_us2clk(hw, ecmd->rx_coalesce_usecs_irq));
3940 sky2_write8(hw, STAT_ISR_TIMER_CTRL, TIM_START);
3941 }
3942 sky2_write8(hw, STAT_FIFO_ISR_WM, ecmd->rx_max_coalesced_frames_irq);
3943 return 0;
3944 }
3945
3946 static void sky2_get_ringparam(struct net_device *dev,
3947 struct ethtool_ringparam *ering)
3948 {
3949 struct sky2_port *sky2 = netdev_priv(dev);
3950
3951 ering->rx_max_pending = RX_MAX_PENDING;
3952 ering->rx_mini_max_pending = 0;
3953 ering->rx_jumbo_max_pending = 0;
3954 ering->tx_max_pending = TX_MAX_PENDING;
3955
3956 ering->rx_pending = sky2->rx_pending;
3957 ering->rx_mini_pending = 0;
3958 ering->rx_jumbo_pending = 0;
3959 ering->tx_pending = sky2->tx_pending;
3960 }
3961
3962 static int sky2_set_ringparam(struct net_device *dev,
3963 struct ethtool_ringparam *ering)
3964 {
3965 struct sky2_port *sky2 = netdev_priv(dev);
3966
3967 if (ering->rx_pending > RX_MAX_PENDING ||
3968 ering->rx_pending < 8 ||
3969 ering->tx_pending < TX_MIN_PENDING ||
3970 ering->tx_pending > TX_MAX_PENDING)
3971 return -EINVAL;
3972
3973 sky2_detach(dev);
3974
3975 sky2->rx_pending = ering->rx_pending;
3976 sky2->tx_pending = ering->tx_pending;
3977 sky2->tx_ring_size = roundup_pow_of_two(sky2->tx_pending+1);
3978
3979 return sky2_reattach(dev);
3980 }
3981
3982 static int sky2_get_regs_len(struct net_device *dev)
3983 {
3984 return 0x4000;
3985 }
3986
3987 static int sky2_reg_access_ok(struct sky2_hw *hw, unsigned int b)
3988 {
3989 /* This complicated switch statement is to make sure and
3990 * only access regions that are unreserved.
3991 * Some blocks are only valid on dual port cards.
3992 */
3993 switch (b) {
3994 /* second port */
3995 case 5: /* Tx Arbiter 2 */
3996 case 9: /* RX2 */
3997 case 14 ... 15: /* TX2 */
3998 case 17: case 19: /* Ram Buffer 2 */
3999 case 22 ... 23: /* Tx Ram Buffer 2 */
4000 case 25: /* Rx MAC Fifo 1 */
4001 case 27: /* Tx MAC Fifo 2 */
4002 case 31: /* GPHY 2 */
4003 case 40 ... 47: /* Pattern Ram 2 */
4004 case 52: case 54: /* TCP Segmentation 2 */
4005 case 112 ... 116: /* GMAC 2 */
4006 return hw->ports > 1;
4007
4008 case 0: /* Control */
4009 case 2: /* Mac address */
4010 case 4: /* Tx Arbiter 1 */
4011 case 7: /* PCI express reg */
4012 case 8: /* RX1 */
4013 case 12 ... 13: /* TX1 */
4014 case 16: case 18:/* Rx Ram Buffer 1 */
4015 case 20 ... 21: /* Tx Ram Buffer 1 */
4016 case 24: /* Rx MAC Fifo 1 */
4017 case 26: /* Tx MAC Fifo 1 */
4018 case 28 ... 29: /* Descriptor and status unit */
4019 case 30: /* GPHY 1*/
4020 case 32 ... 39: /* Pattern Ram 1 */
4021 case 48: case 50: /* TCP Segmentation 1 */
4022 case 56 ... 60: /* PCI space */
4023 case 80 ... 84: /* GMAC 1 */
4024 return 1;
4025
4026 default:
4027 return 0;
4028 }
4029 }
4030
4031 /*
4032 * Returns copy of control register region
4033 * Note: ethtool_get_regs always provides full size (16k) buffer
4034 */
4035 static void sky2_get_regs(struct net_device *dev, struct ethtool_regs *regs,
4036 void *p)
4037 {
4038 const struct sky2_port *sky2 = netdev_priv(dev);
4039 const void __iomem *io = sky2->hw->regs;
4040 unsigned int b;
4041
4042 regs->version = 1;
4043
4044 for (b = 0; b < 128; b++) {
4045 /* skip poisonous diagnostic ram region in block 3 */
4046 if (b == 3)
4047 memcpy_fromio(p + 0x10, io + 0x10, 128 - 0x10);
4048 else if (sky2_reg_access_ok(sky2->hw, b))
4049 memcpy_fromio(p, io, 128);
4050 else
4051 memset(p, 0, 128);
4052
4053 p += 128;
4054 io += 128;
4055 }
4056 }
4057
4058 /* In order to do Jumbo packets on these chips, need to turn off the
4059 * transmit store/forward. Therefore checksum offload won't work.
4060 */
4061 static int no_tx_offload(struct net_device *dev)
4062 {
4063 const struct sky2_port *sky2 = netdev_priv(dev);
4064 const struct sky2_hw *hw = sky2->hw;
4065
4066 return dev->mtu > ETH_DATA_LEN && hw->chip_id == CHIP_ID_YUKON_EC_U;
4067 }
4068
4069 static int sky2_set_tx_csum(struct net_device *dev, u32 data)
4070 {
4071 if (data && no_tx_offload(dev))
4072 return -EINVAL;
4073
4074 return ethtool_op_set_tx_csum(dev, data);
4075 }
4076
4077
4078 static int sky2_set_tso(struct net_device *dev, u32 data)
4079 {
4080 if (data && no_tx_offload(dev))
4081 return -EINVAL;
4082
4083 return ethtool_op_set_tso(dev, data);
4084 }
4085
4086 static int sky2_get_eeprom_len(struct net_device *dev)
4087 {
4088 struct sky2_port *sky2 = netdev_priv(dev);
4089 struct sky2_hw *hw = sky2->hw;
4090 u16 reg2;
4091
4092 reg2 = sky2_pci_read16(hw, PCI_DEV_REG2);
4093 return 1 << ( ((reg2 & PCI_VPD_ROM_SZ) >> 14) + 8);
4094 }
4095
4096 static int sky2_vpd_wait(const struct sky2_hw *hw, int cap, u16 busy)
4097 {
4098 unsigned long start = jiffies;
4099
4100 while ( (sky2_pci_read16(hw, cap + PCI_VPD_ADDR) & PCI_VPD_ADDR_F) == busy) {
4101 /* Can take up to 10.6 ms for write */
4102 if (time_after(jiffies, start + HZ/4)) {
4103 dev_err(&hw->pdev->dev, "VPD cycle timed out\n");
4104 return -ETIMEDOUT;
4105 }
4106 mdelay(1);
4107 }
4108
4109 return 0;
4110 }
4111
4112 static int sky2_vpd_read(struct sky2_hw *hw, int cap, void *data,
4113 u16 offset, size_t length)
4114 {
4115 int rc = 0;
4116
4117 while (length > 0) {
4118 u32 val;
4119
4120 sky2_pci_write16(hw, cap + PCI_VPD_ADDR, offset);
4121 rc = sky2_vpd_wait(hw, cap, 0);
4122 if (rc)
4123 break;
4124
4125 val = sky2_pci_read32(hw, cap + PCI_VPD_DATA);
4126
4127 memcpy(data, &val, min(sizeof(val), length));
4128 offset += sizeof(u32);
4129 data += sizeof(u32);
4130 length -= sizeof(u32);
4131 }
4132
4133 return rc;
4134 }
4135
4136 static int sky2_vpd_write(struct sky2_hw *hw, int cap, const void *data,
4137 u16 offset, unsigned int length)
4138 {
4139 unsigned int i;
4140 int rc = 0;
4141
4142 for (i = 0; i < length; i += sizeof(u32)) {
4143 u32 val = *(u32 *)(data + i);
4144
4145 sky2_pci_write32(hw, cap + PCI_VPD_DATA, val);
4146 sky2_pci_write32(hw, cap + PCI_VPD_ADDR, offset | PCI_VPD_ADDR_F);
4147
4148 rc = sky2_vpd_wait(hw, cap, PCI_VPD_ADDR_F);
4149 if (rc)
4150 break;
4151 }
4152 return rc;
4153 }
4154
4155 static int sky2_get_eeprom(struct net_device *dev, struct ethtool_eeprom *eeprom,
4156 u8 *data)
4157 {
4158 struct sky2_port *sky2 = netdev_priv(dev);
4159 int cap = pci_find_capability(sky2->hw->pdev, PCI_CAP_ID_VPD);
4160
4161 if (!cap)
4162 return -EINVAL;
4163
4164 eeprom->magic = SKY2_EEPROM_MAGIC;
4165
4166 return sky2_vpd_read(sky2->hw, cap, data, eeprom->offset, eeprom->len);
4167 }
4168
4169 static int sky2_set_eeprom(struct net_device *dev, struct ethtool_eeprom *eeprom,
4170 u8 *data)
4171 {
4172 struct sky2_port *sky2 = netdev_priv(dev);
4173 int cap = pci_find_capability(sky2->hw->pdev, PCI_CAP_ID_VPD);
4174
4175 if (!cap)
4176 return -EINVAL;
4177
4178 if (eeprom->magic != SKY2_EEPROM_MAGIC)
4179 return -EINVAL;
4180
4181 /* Partial writes not supported */
4182 if ((eeprom->offset & 3) || (eeprom->len & 3))
4183 return -EINVAL;
4184
4185 return sky2_vpd_write(sky2->hw, cap, data, eeprom->offset, eeprom->len);
4186 }
4187
4188 static int sky2_set_flags(struct net_device *dev, u32 data)
4189 {
4190 struct sky2_port *sky2 = netdev_priv(dev);
4191
4192 if (data & ~ETH_FLAG_RXHASH)
4193 return -EOPNOTSUPP;
4194
4195 if (data & ETH_FLAG_RXHASH) {
4196 if (sky2->hw->flags & SKY2_HW_RSS_BROKEN)
4197 return -EINVAL;
4198
4199 dev->features |= NETIF_F_RXHASH;
4200 } else
4201 dev->features &= ~NETIF_F_RXHASH;
4202
4203 rx_set_rss(dev);
4204
4205 return 0;
4206 }
4207
4208 static const struct ethtool_ops sky2_ethtool_ops = {
4209 .get_settings = sky2_get_settings,
4210 .set_settings = sky2_set_settings,
4211 .get_drvinfo = sky2_get_drvinfo,
4212 .get_wol = sky2_get_wol,
4213 .set_wol = sky2_set_wol,
4214 .get_msglevel = sky2_get_msglevel,
4215 .set_msglevel = sky2_set_msglevel,
4216 .nway_reset = sky2_nway_reset,
4217 .get_regs_len = sky2_get_regs_len,
4218 .get_regs = sky2_get_regs,
4219 .get_link = ethtool_op_get_link,
4220 .get_eeprom_len = sky2_get_eeprom_len,
4221 .get_eeprom = sky2_get_eeprom,
4222 .set_eeprom = sky2_set_eeprom,
4223 .set_sg = ethtool_op_set_sg,
4224 .set_tx_csum = sky2_set_tx_csum,
4225 .set_tso = sky2_set_tso,
4226 .get_rx_csum = sky2_get_rx_csum,
4227 .set_rx_csum = sky2_set_rx_csum,
4228 .get_strings = sky2_get_strings,
4229 .get_coalesce = sky2_get_coalesce,
4230 .set_coalesce = sky2_set_coalesce,
4231 .get_ringparam = sky2_get_ringparam,
4232 .set_ringparam = sky2_set_ringparam,
4233 .get_pauseparam = sky2_get_pauseparam,
4234 .set_pauseparam = sky2_set_pauseparam,
4235 .phys_id = sky2_phys_id,
4236 .get_sset_count = sky2_get_sset_count,
4237 .get_ethtool_stats = sky2_get_ethtool_stats,
4238 .set_flags = sky2_set_flags,
4239 };
4240
4241 #ifdef CONFIG_SKY2_DEBUG
4242
4243 static struct dentry *sky2_debug;
4244
4245
4246 /*
4247 * Read and parse the first part of Vital Product Data
4248 */
4249 #define VPD_SIZE 128
4250 #define VPD_MAGIC 0x82
4251
4252 static const struct vpd_tag {
4253 char tag[2];
4254 char *label;
4255 } vpd_tags[] = {
4256 { "PN", "Part Number" },
4257 { "EC", "Engineering Level" },
4258 { "MN", "Manufacturer" },
4259 { "SN", "Serial Number" },
4260 { "YA", "Asset Tag" },
4261 { "VL", "First Error Log Message" },
4262 { "VF", "Second Error Log Message" },
4263 { "VB", "Boot Agent ROM Configuration" },
4264 { "VE", "EFI UNDI Configuration" },
4265 };
4266
4267 static void sky2_show_vpd(struct seq_file *seq, struct sky2_hw *hw)
4268 {
4269 size_t vpd_size;
4270 loff_t offs;
4271 u8 len;
4272 unsigned char *buf;
4273 u16 reg2;
4274
4275 reg2 = sky2_pci_read16(hw, PCI_DEV_REG2);
4276 vpd_size = 1 << ( ((reg2 & PCI_VPD_ROM_SZ) >> 14) + 8);
4277
4278 seq_printf(seq, "%s Product Data\n", pci_name(hw->pdev));
4279 buf = kmalloc(vpd_size, GFP_KERNEL);
4280 if (!buf) {
4281 seq_puts(seq, "no memory!\n");
4282 return;
4283 }
4284
4285 if (pci_read_vpd(hw->pdev, 0, vpd_size, buf) < 0) {
4286 seq_puts(seq, "VPD read failed\n");
4287 goto out;
4288 }
4289
4290 if (buf[0] != VPD_MAGIC) {
4291 seq_printf(seq, "VPD tag mismatch: %#x\n", buf[0]);
4292 goto out;
4293 }
4294 len = buf[1];
4295 if (len == 0 || len > vpd_size - 4) {
4296 seq_printf(seq, "Invalid id length: %d\n", len);
4297 goto out;
4298 }
4299
4300 seq_printf(seq, "%.*s\n", len, buf + 3);
4301 offs = len + 3;
4302
4303 while (offs < vpd_size - 4) {
4304 int i;
4305
4306 if (!memcmp("RW", buf + offs, 2)) /* end marker */
4307 break;
4308 len = buf[offs + 2];
4309 if (offs + len + 3 >= vpd_size)
4310 break;
4311
4312 for (i = 0; i < ARRAY_SIZE(vpd_tags); i++) {
4313 if (!memcmp(vpd_tags[i].tag, buf + offs, 2)) {
4314 seq_printf(seq, " %s: %.*s\n",
4315 vpd_tags[i].label, len, buf + offs + 3);
4316 break;
4317 }
4318 }
4319 offs += len + 3;
4320 }
4321 out:
4322 kfree(buf);
4323 }
4324
4325 static int sky2_debug_show(struct seq_file *seq, void *v)
4326 {
4327 struct net_device *dev = seq->private;
4328 const struct sky2_port *sky2 = netdev_priv(dev);
4329 struct sky2_hw *hw = sky2->hw;
4330 unsigned port = sky2->port;
4331 unsigned idx, last;
4332 int sop;
4333
4334 sky2_show_vpd(seq, hw);
4335
4336 seq_printf(seq, "\nIRQ src=%x mask=%x control=%x\n",
4337 sky2_read32(hw, B0_ISRC),
4338 sky2_read32(hw, B0_IMSK),
4339 sky2_read32(hw, B0_Y2_SP_ICR));
4340
4341 if (!netif_running(dev)) {
4342 seq_printf(seq, "network not running\n");
4343 return 0;
4344 }
4345
4346 napi_disable(&hw->napi);
4347 last = sky2_read16(hw, STAT_PUT_IDX);
4348
4349 seq_printf(seq, "Status ring %u\n", hw->st_size);
4350 if (hw->st_idx == last)
4351 seq_puts(seq, "Status ring (empty)\n");
4352 else {
4353 seq_puts(seq, "Status ring\n");
4354 for (idx = hw->st_idx; idx != last && idx < hw->st_size;
4355 idx = RING_NEXT(idx, hw->st_size)) {
4356 const struct sky2_status_le *le = hw->st_le + idx;
4357 seq_printf(seq, "[%d] %#x %d %#x\n",
4358 idx, le->opcode, le->length, le->status);
4359 }
4360 seq_puts(seq, "\n");
4361 }
4362
4363 seq_printf(seq, "Tx ring pending=%u...%u report=%d done=%d\n",
4364 sky2->tx_cons, sky2->tx_prod,
4365 sky2_read16(hw, port == 0 ? STAT_TXA1_RIDX : STAT_TXA2_RIDX),
4366 sky2_read16(hw, Q_ADDR(txqaddr[port], Q_DONE)));
4367
4368 /* Dump contents of tx ring */
4369 sop = 1;
4370 for (idx = sky2->tx_next; idx != sky2->tx_prod && idx < sky2->tx_ring_size;
4371 idx = RING_NEXT(idx, sky2->tx_ring_size)) {
4372 const struct sky2_tx_le *le = sky2->tx_le + idx;
4373 u32 a = le32_to_cpu(le->addr);
4374
4375 if (sop)
4376 seq_printf(seq, "%u:", idx);
4377 sop = 0;
4378
4379 switch(le->opcode & ~HW_OWNER) {
4380 case OP_ADDR64:
4381 seq_printf(seq, " %#x:", a);
4382 break;
4383 case OP_LRGLEN:
4384 seq_printf(seq, " mtu=%d", a);
4385 break;
4386 case OP_VLAN:
4387 seq_printf(seq, " vlan=%d", be16_to_cpu(le->length));
4388 break;
4389 case OP_TCPLISW:
4390 seq_printf(seq, " csum=%#x", a);
4391 break;
4392 case OP_LARGESEND:
4393 seq_printf(seq, " tso=%#x(%d)", a, le16_to_cpu(le->length));
4394 break;
4395 case OP_PACKET:
4396 seq_printf(seq, " %#x(%d)", a, le16_to_cpu(le->length));
4397 break;
4398 case OP_BUFFER:
4399 seq_printf(seq, " frag=%#x(%d)", a, le16_to_cpu(le->length));
4400 break;
4401 default:
4402 seq_printf(seq, " op=%#x,%#x(%d)", le->opcode,
4403 a, le16_to_cpu(le->length));
4404 }
4405
4406 if (le->ctrl & EOP) {
4407 seq_putc(seq, '\n');
4408 sop = 1;
4409 }
4410 }
4411
4412 seq_printf(seq, "\nRx ring hw get=%d put=%d last=%d\n",
4413 sky2_read16(hw, Y2_QADDR(rxqaddr[port], PREF_UNIT_GET_IDX)),
4414 sky2_read16(hw, Y2_QADDR(rxqaddr[port], PREF_UNIT_PUT_IDX)),
4415 sky2_read16(hw, Y2_QADDR(rxqaddr[port], PREF_UNIT_LAST_IDX)));
4416
4417 sky2_read32(hw, B0_Y2_SP_LISR);
4418 napi_enable(&hw->napi);
4419 return 0;
4420 }
4421
4422 static int sky2_debug_open(struct inode *inode, struct file *file)
4423 {
4424 return single_open(file, sky2_debug_show, inode->i_private);
4425 }
4426
4427 static const struct file_operations sky2_debug_fops = {
4428 .owner = THIS_MODULE,
4429 .open = sky2_debug_open,
4430 .read = seq_read,
4431 .llseek = seq_lseek,
4432 .release = single_release,
4433 };
4434
4435 /*
4436 * Use network device events to create/remove/rename
4437 * debugfs file entries
4438 */
4439 static int sky2_device_event(struct notifier_block *unused,
4440 unsigned long event, void *ptr)
4441 {
4442 struct net_device *dev = ptr;
4443 struct sky2_port *sky2 = netdev_priv(dev);
4444
4445 if (dev->netdev_ops->ndo_open != sky2_up || !sky2_debug)
4446 return NOTIFY_DONE;
4447
4448 switch(event) {
4449 case NETDEV_CHANGENAME:
4450 if (sky2->debugfs) {
4451 sky2->debugfs = debugfs_rename(sky2_debug, sky2->debugfs,
4452 sky2_debug, dev->name);
4453 }
4454 break;
4455
4456 case NETDEV_GOING_DOWN:
4457 if (sky2->debugfs) {
4458 netdev_printk(KERN_DEBUG, dev, "remove debugfs\n");
4459 debugfs_remove(sky2->debugfs);
4460 sky2->debugfs = NULL;
4461 }
4462 break;
4463
4464 case NETDEV_UP:
4465 sky2->debugfs = debugfs_create_file(dev->name, S_IRUGO,
4466 sky2_debug, dev,
4467 &sky2_debug_fops);
4468 if (IS_ERR(sky2->debugfs))
4469 sky2->debugfs = NULL;
4470 }
4471
4472 return NOTIFY_DONE;
4473 }
4474
4475 static struct notifier_block sky2_notifier = {
4476 .notifier_call = sky2_device_event,
4477 };
4478
4479
4480 static __init void sky2_debug_init(void)
4481 {
4482 struct dentry *ent;
4483
4484 ent = debugfs_create_dir("sky2", NULL);
4485 if (!ent || IS_ERR(ent))
4486 return;
4487
4488 sky2_debug = ent;
4489 register_netdevice_notifier(&sky2_notifier);
4490 }
4491
4492 static __exit void sky2_debug_cleanup(void)
4493 {
4494 if (sky2_debug) {
4495 unregister_netdevice_notifier(&sky2_notifier);
4496 debugfs_remove(sky2_debug);
4497 sky2_debug = NULL;
4498 }
4499 }
4500
4501 #else
4502 #define sky2_debug_init()
4503 #define sky2_debug_cleanup()
4504 #endif
4505
4506 /* Two copies of network device operations to handle special case of
4507 not allowing netpoll on second port */
4508 static const struct net_device_ops sky2_netdev_ops[2] = {
4509 {
4510 .ndo_open = sky2_up,
4511 .ndo_stop = sky2_down,
4512 .ndo_start_xmit = sky2_xmit_frame,
4513 .ndo_do_ioctl = sky2_ioctl,
4514 .ndo_validate_addr = eth_validate_addr,
4515 .ndo_set_mac_address = sky2_set_mac_address,
4516 .ndo_set_multicast_list = sky2_set_multicast,
4517 .ndo_change_mtu = sky2_change_mtu,
4518 .ndo_tx_timeout = sky2_tx_timeout,
4519 #ifdef SKY2_VLAN_TAG_USED
4520 .ndo_vlan_rx_register = sky2_vlan_rx_register,
4521 #endif
4522 #ifdef CONFIG_NET_POLL_CONTROLLER
4523 .ndo_poll_controller = sky2_netpoll,
4524 #endif
4525 },
4526 {
4527 .ndo_open = sky2_up,
4528 .ndo_stop = sky2_down,
4529 .ndo_start_xmit = sky2_xmit_frame,
4530 .ndo_do_ioctl = sky2_ioctl,
4531 .ndo_validate_addr = eth_validate_addr,
4532 .ndo_set_mac_address = sky2_set_mac_address,
4533 .ndo_set_multicast_list = sky2_set_multicast,
4534 .ndo_change_mtu = sky2_change_mtu,
4535 .ndo_tx_timeout = sky2_tx_timeout,
4536 #ifdef SKY2_VLAN_TAG_USED
4537 .ndo_vlan_rx_register = sky2_vlan_rx_register,
4538 #endif
4539 },
4540 };
4541
4542 /* Initialize network device */
4543 static __devinit struct net_device *sky2_init_netdev(struct sky2_hw *hw,
4544 unsigned port,
4545 int highmem, int wol)
4546 {
4547 struct sky2_port *sky2;
4548 struct net_device *dev = alloc_etherdev(sizeof(*sky2));
4549
4550 if (!dev) {
4551 dev_err(&hw->pdev->dev, "etherdev alloc failed\n");
4552 return NULL;
4553 }
4554
4555 SET_NETDEV_DEV(dev, &hw->pdev->dev);
4556 dev->irq = hw->pdev->irq;
4557 SET_ETHTOOL_OPS(dev, &sky2_ethtool_ops);
4558 dev->watchdog_timeo = TX_WATCHDOG;
4559 dev->netdev_ops = &sky2_netdev_ops[port];
4560
4561 sky2 = netdev_priv(dev);
4562 sky2->netdev = dev;
4563 sky2->hw = hw;
4564 sky2->msg_enable = netif_msg_init(debug, default_msg);
4565
4566 /* Auto speed and flow control */
4567 sky2->flags = SKY2_FLAG_AUTO_SPEED | SKY2_FLAG_AUTO_PAUSE;
4568 if (hw->chip_id != CHIP_ID_YUKON_XL)
4569 sky2->flags |= SKY2_FLAG_RX_CHECKSUM;
4570
4571 sky2->flow_mode = FC_BOTH;
4572
4573 sky2->duplex = -1;
4574 sky2->speed = -1;
4575 sky2->advertising = sky2_supported_modes(hw);
4576 sky2->wol = wol;
4577
4578 spin_lock_init(&sky2->phy_lock);
4579
4580 sky2->tx_pending = TX_DEF_PENDING;
4581 sky2->tx_ring_size = roundup_pow_of_two(TX_DEF_PENDING+1);
4582 sky2->rx_pending = RX_DEF_PENDING;
4583
4584 hw->dev[port] = dev;
4585
4586 sky2->port = port;
4587
4588 dev->features |= NETIF_F_TSO | NETIF_F_IP_CSUM | NETIF_F_SG;
4589 if (highmem)
4590 dev->features |= NETIF_F_HIGHDMA;
4591
4592 /* Enable receive hashing unless hardware is known broken */
4593 if (!(hw->flags & SKY2_HW_RSS_BROKEN))
4594 dev->features |= NETIF_F_RXHASH;
4595
4596 #ifdef SKY2_VLAN_TAG_USED
4597 /* The workaround for FE+ status conflicts with VLAN tag detection. */
4598 if (!(sky2->hw->chip_id == CHIP_ID_YUKON_FE_P &&
4599 sky2->hw->chip_rev == CHIP_REV_YU_FE2_A0)) {
4600 dev->features |= NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX;
4601 }
4602 #endif
4603
4604 /* read the mac address */
4605 memcpy_fromio(dev->dev_addr, hw->regs + B2_MAC_1 + port * 8, ETH_ALEN);
4606 memcpy(dev->perm_addr, dev->dev_addr, dev->addr_len);
4607
4608 return dev;
4609 }
4610
4611 static void __devinit sky2_show_addr(struct net_device *dev)
4612 {
4613 const struct sky2_port *sky2 = netdev_priv(dev);
4614
4615 netif_info(sky2, probe, dev, "addr %pM\n", dev->dev_addr);
4616 }
4617
4618 /* Handle software interrupt used during MSI test */
4619 static irqreturn_t __devinit sky2_test_intr(int irq, void *dev_id)
4620 {
4621 struct sky2_hw *hw = dev_id;
4622 u32 status = sky2_read32(hw, B0_Y2_SP_ISRC2);
4623
4624 if (status == 0)
4625 return IRQ_NONE;
4626
4627 if (status & Y2_IS_IRQ_SW) {
4628 hw->flags |= SKY2_HW_USE_MSI;
4629 wake_up(&hw->msi_wait);
4630 sky2_write8(hw, B0_CTST, CS_CL_SW_IRQ);
4631 }
4632 sky2_write32(hw, B0_Y2_SP_ICR, 2);
4633
4634 return IRQ_HANDLED;
4635 }
4636
4637 /* Test interrupt path by forcing a a software IRQ */
4638 static int __devinit sky2_test_msi(struct sky2_hw *hw)
4639 {
4640 struct pci_dev *pdev = hw->pdev;
4641 int err;
4642
4643 init_waitqueue_head (&hw->msi_wait);
4644
4645 sky2_write32(hw, B0_IMSK, Y2_IS_IRQ_SW);
4646
4647 err = request_irq(pdev->irq, sky2_test_intr, 0, DRV_NAME, hw);
4648 if (err) {
4649 dev_err(&pdev->dev, "cannot assign irq %d\n", pdev->irq);
4650 return err;
4651 }
4652
4653 sky2_write8(hw, B0_CTST, CS_ST_SW_IRQ);
4654 sky2_read8(hw, B0_CTST);
4655
4656 wait_event_timeout(hw->msi_wait, (hw->flags & SKY2_HW_USE_MSI), HZ/10);
4657
4658 if (!(hw->flags & SKY2_HW_USE_MSI)) {
4659 /* MSI test failed, go back to INTx mode */
4660 dev_info(&pdev->dev, "No interrupt generated using MSI, "
4661 "switching to INTx mode.\n");
4662
4663 err = -EOPNOTSUPP;
4664 sky2_write8(hw, B0_CTST, CS_CL_SW_IRQ);
4665 }
4666
4667 sky2_write32(hw, B0_IMSK, 0);
4668 sky2_read32(hw, B0_IMSK);
4669
4670 free_irq(pdev->irq, hw);
4671
4672 return err;
4673 }
4674
4675 /* This driver supports yukon2 chipset only */
4676 static const char *sky2_name(u8 chipid, char *buf, int sz)
4677 {
4678 const char *name[] = {
4679 "XL", /* 0xb3 */
4680 "EC Ultra", /* 0xb4 */
4681 "Extreme", /* 0xb5 */
4682 "EC", /* 0xb6 */
4683 "FE", /* 0xb7 */
4684 "FE+", /* 0xb8 */
4685 "Supreme", /* 0xb9 */
4686 "UL 2", /* 0xba */
4687 "Unknown", /* 0xbb */
4688 "Optima", /* 0xbc */
4689 };
4690
4691 if (chipid >= CHIP_ID_YUKON_XL && chipid <= CHIP_ID_YUKON_OPT)
4692 strncpy(buf, name[chipid - CHIP_ID_YUKON_XL], sz);
4693 else
4694 snprintf(buf, sz, "(chip %#x)", chipid);
4695 return buf;
4696 }
4697
4698 static int __devinit sky2_probe(struct pci_dev *pdev,
4699 const struct pci_device_id *ent)
4700 {
4701 struct net_device *dev;
4702 struct sky2_hw *hw;
4703 int err, using_dac = 0, wol_default;
4704 u32 reg;
4705 char buf1[16];
4706
4707 err = pci_enable_device(pdev);
4708 if (err) {
4709 dev_err(&pdev->dev, "cannot enable PCI device\n");
4710 goto err_out;
4711 }
4712
4713 /* Get configuration information
4714 * Note: only regular PCI config access once to test for HW issues
4715 * other PCI access through shared memory for speed and to
4716 * avoid MMCONFIG problems.
4717 */
4718 err = pci_read_config_dword(pdev, PCI_DEV_REG2, &reg);
4719 if (err) {
4720 dev_err(&pdev->dev, "PCI read config failed\n");
4721 goto err_out;
4722 }
4723
4724 if (~reg == 0) {
4725 dev_err(&pdev->dev, "PCI configuration read error\n");
4726 goto err_out;
4727 }
4728
4729 err = pci_request_regions(pdev, DRV_NAME);
4730 if (err) {
4731 dev_err(&pdev->dev, "cannot obtain PCI resources\n");
4732 goto err_out_disable;
4733 }
4734
4735 pci_set_master(pdev);
4736
4737 if (sizeof(dma_addr_t) > sizeof(u32) &&
4738 !(err = pci_set_dma_mask(pdev, DMA_BIT_MASK(64)))) {
4739 using_dac = 1;
4740 err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64));
4741 if (err < 0) {
4742 dev_err(&pdev->dev, "unable to obtain 64 bit DMA "
4743 "for consistent allocations\n");
4744 goto err_out_free_regions;
4745 }
4746 } else {
4747 err = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
4748 if (err) {
4749 dev_err(&pdev->dev, "no usable DMA configuration\n");
4750 goto err_out_free_regions;
4751 }
4752 }
4753
4754
4755 #ifdef __BIG_ENDIAN
4756 /* The sk98lin vendor driver uses hardware byte swapping but
4757 * this driver uses software swapping.
4758 */
4759 reg &= ~PCI_REV_DESC;
4760 err = pci_write_config_dword(pdev,PCI_DEV_REG2, reg);
4761 if (err) {
4762 dev_err(&pdev->dev, "PCI write config failed\n");
4763 goto err_out_free_regions;
4764 }
4765 #endif
4766
4767 wol_default = device_may_wakeup(&pdev->dev) ? WAKE_MAGIC : 0;
4768
4769 err = -ENOMEM;
4770
4771 hw = kzalloc(sizeof(*hw) + strlen(DRV_NAME "@pci:")
4772 + strlen(pci_name(pdev)) + 1, GFP_KERNEL);
4773 if (!hw) {
4774 dev_err(&pdev->dev, "cannot allocate hardware struct\n");
4775 goto err_out_free_regions;
4776 }
4777
4778 hw->pdev = pdev;
4779 sprintf(hw->irq_name, DRV_NAME "@pci:%s", pci_name(pdev));
4780
4781 hw->regs = ioremap_nocache(pci_resource_start(pdev, 0), 0x4000);
4782 if (!hw->regs) {
4783 dev_err(&pdev->dev, "cannot map device registers\n");
4784 goto err_out_free_hw;
4785 }
4786
4787 err = sky2_init(hw);
4788 if (err)
4789 goto err_out_iounmap;
4790
4791 /* ring for status responses */
4792 hw->st_size = hw->ports * roundup_pow_of_two(3*RX_MAX_PENDING + TX_MAX_PENDING);
4793 hw->st_le = pci_alloc_consistent(pdev, hw->st_size * sizeof(struct sky2_status_le),
4794 &hw->st_dma);
4795 if (!hw->st_le)
4796 goto err_out_reset;
4797
4798 dev_info(&pdev->dev, "Yukon-2 %s chip revision %d\n",
4799 sky2_name(hw->chip_id, buf1, sizeof(buf1)), hw->chip_rev);
4800
4801 sky2_reset(hw);
4802
4803 dev = sky2_init_netdev(hw, 0, using_dac, wol_default);
4804 if (!dev) {
4805 err = -ENOMEM;
4806 goto err_out_free_pci;
4807 }
4808
4809 if (!disable_msi && pci_enable_msi(pdev) == 0) {
4810 err = sky2_test_msi(hw);
4811 if (err == -EOPNOTSUPP)
4812 pci_disable_msi(pdev);
4813 else if (err)
4814 goto err_out_free_netdev;
4815 }
4816
4817 err = register_netdev(dev);
4818 if (err) {
4819 dev_err(&pdev->dev, "cannot register net device\n");
4820 goto err_out_free_netdev;
4821 }
4822
4823 netif_carrier_off(dev);
4824
4825 netif_napi_add(dev, &hw->napi, sky2_poll, NAPI_WEIGHT);
4826
4827 err = request_irq(pdev->irq, sky2_intr,
4828 (hw->flags & SKY2_HW_USE_MSI) ? 0 : IRQF_SHARED,
4829 hw->irq_name, hw);
4830 if (err) {
4831 dev_err(&pdev->dev, "cannot assign irq %d\n", pdev->irq);
4832 goto err_out_unregister;
4833 }
4834 sky2_write32(hw, B0_IMSK, Y2_IS_BASE);
4835 napi_enable(&hw->napi);
4836
4837 sky2_show_addr(dev);
4838
4839 if (hw->ports > 1) {
4840 struct net_device *dev1;
4841
4842 err = -ENOMEM;
4843 dev1 = sky2_init_netdev(hw, 1, using_dac, wol_default);
4844 if (dev1 && (err = register_netdev(dev1)) == 0)
4845 sky2_show_addr(dev1);
4846 else {
4847 dev_warn(&pdev->dev,
4848 "register of second port failed (%d)\n", err);
4849 hw->dev[1] = NULL;
4850 hw->ports = 1;
4851 if (dev1)
4852 free_netdev(dev1);
4853 }
4854 }
4855
4856 setup_timer(&hw->watchdog_timer, sky2_watchdog, (unsigned long) hw);
4857 INIT_WORK(&hw->restart_work, sky2_restart);
4858
4859 pci_set_drvdata(pdev, hw);
4860 pdev->d3_delay = 150;
4861
4862 return 0;
4863
4864 err_out_unregister:
4865 if (hw->flags & SKY2_HW_USE_MSI)
4866 pci_disable_msi(pdev);
4867 unregister_netdev(dev);
4868 err_out_free_netdev:
4869 free_netdev(dev);
4870 err_out_free_pci:
4871 pci_free_consistent(pdev, hw->st_size * sizeof(struct sky2_status_le),
4872 hw->st_le, hw->st_dma);
4873 err_out_reset:
4874 sky2_write8(hw, B0_CTST, CS_RST_SET);
4875 err_out_iounmap:
4876 iounmap(hw->regs);
4877 err_out_free_hw:
4878 kfree(hw);
4879 err_out_free_regions:
4880 pci_release_regions(pdev);
4881 err_out_disable:
4882 pci_disable_device(pdev);
4883 err_out:
4884 pci_set_drvdata(pdev, NULL);
4885 return err;
4886 }
4887
4888 static void __devexit sky2_remove(struct pci_dev *pdev)
4889 {
4890 struct sky2_hw *hw = pci_get_drvdata(pdev);
4891 int i;
4892
4893 if (!hw)
4894 return;
4895
4896 del_timer_sync(&hw->watchdog_timer);
4897 cancel_work_sync(&hw->restart_work);
4898
4899 for (i = hw->ports-1; i >= 0; --i)
4900 unregister_netdev(hw->dev[i]);
4901
4902 sky2_write32(hw, B0_IMSK, 0);
4903
4904 sky2_power_aux(hw);
4905
4906 sky2_write8(hw, B0_CTST, CS_RST_SET);
4907 sky2_read8(hw, B0_CTST);
4908
4909 free_irq(pdev->irq, hw);
4910 if (hw->flags & SKY2_HW_USE_MSI)
4911 pci_disable_msi(pdev);
4912 pci_free_consistent(pdev, hw->st_size * sizeof(struct sky2_status_le),
4913 hw->st_le, hw->st_dma);
4914 pci_release_regions(pdev);
4915 pci_disable_device(pdev);
4916
4917 for (i = hw->ports-1; i >= 0; --i)
4918 free_netdev(hw->dev[i]);
4919
4920 iounmap(hw->regs);
4921 kfree(hw);
4922
4923 pci_set_drvdata(pdev, NULL);
4924 }
4925
4926 static int sky2_suspend(struct pci_dev *pdev, pm_message_t state)
4927 {
4928 struct sky2_hw *hw = pci_get_drvdata(pdev);
4929 int i, wol = 0;
4930
4931 if (!hw)
4932 return 0;
4933
4934 del_timer_sync(&hw->watchdog_timer);
4935 cancel_work_sync(&hw->restart_work);
4936
4937 rtnl_lock();
4938
4939 sky2_all_down(hw);
4940 for (i = 0; i < hw->ports; i++) {
4941 struct net_device *dev = hw->dev[i];
4942 struct sky2_port *sky2 = netdev_priv(dev);
4943
4944 if (sky2->wol)
4945 sky2_wol_init(sky2);
4946
4947 wol |= sky2->wol;
4948 }
4949
4950 device_set_wakeup_enable(&pdev->dev, wol != 0);
4951
4952 sky2_power_aux(hw);
4953 rtnl_unlock();
4954
4955 pci_save_state(pdev);
4956 pci_enable_wake(pdev, pci_choose_state(pdev, state), wol);
4957 pci_set_power_state(pdev, pci_choose_state(pdev, state));
4958
4959 return 0;
4960 }
4961
4962 #ifdef CONFIG_PM
4963 static int sky2_resume(struct pci_dev *pdev)
4964 {
4965 struct sky2_hw *hw = pci_get_drvdata(pdev);
4966 int err;
4967
4968 if (!hw)
4969 return 0;
4970
4971 err = pci_set_power_state(pdev, PCI_D0);
4972 if (err)
4973 goto out;
4974
4975 err = pci_restore_state(pdev);
4976 if (err)
4977 goto out;
4978
4979 pci_enable_wake(pdev, PCI_D0, 0);
4980
4981 /* Re-enable all clocks */
4982 err = pci_write_config_dword(pdev, PCI_DEV_REG3, 0);
4983 if (err) {
4984 dev_err(&pdev->dev, "PCI write config failed\n");
4985 goto out;
4986 }
4987
4988 rtnl_lock();
4989 sky2_reset(hw);
4990 sky2_all_up(hw);
4991 rtnl_unlock();
4992
4993 return 0;
4994 out:
4995
4996 dev_err(&pdev->dev, "resume failed (%d)\n", err);
4997 pci_disable_device(pdev);
4998 return err;
4999 }
5000 #endif
5001
5002 static void sky2_shutdown(struct pci_dev *pdev)
5003 {
5004 sky2_suspend(pdev, PMSG_SUSPEND);
5005 }
5006
5007 static struct pci_driver sky2_driver = {
5008 .name = DRV_NAME,
5009 .id_table = sky2_id_table,
5010 .probe = sky2_probe,
5011 .remove = __devexit_p(sky2_remove),
5012 #ifdef CONFIG_PM
5013 .suspend = sky2_suspend,
5014 .resume = sky2_resume,
5015 #endif
5016 .shutdown = sky2_shutdown,
5017 };
5018
5019 static int __init sky2_init_module(void)
5020 {
5021 pr_info("driver version " DRV_VERSION "\n");
5022
5023 sky2_debug_init();
5024 return pci_register_driver(&sky2_driver);
5025 }
5026
5027 static void __exit sky2_cleanup_module(void)
5028 {
5029 pci_unregister_driver(&sky2_driver);
5030 sky2_debug_cleanup();
5031 }
5032
5033 module_init(sky2_init_module);
5034 module_exit(sky2_cleanup_module);
5035
5036 MODULE_DESCRIPTION("Marvell Yukon 2 Gigabit Ethernet driver");
5037 MODULE_AUTHOR("Stephen Hemminger <shemminger@linux-foundation.org>");
5038 MODULE_LICENSE("GPL");
5039 MODULE_VERSION(DRV_VERSION);
Linux 2.6 ibm-acpi/thinkpad-acpi driver git tree