?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
[ARM] 4473/2: Take the HWCAP definitions out of the elf.h file
[linux-2.6/linux-2.6-openrd.git] / sound / oss / mpu401.c
blob2796c0ef985fc5c08d62af8c33b92da2c83e1240
1 /*
2 * sound/oss/mpu401.c
3 *
4 * The low level driver for Roland MPU-401 compatible Midi cards.
5 */
6 /*
7 * Copyright (C) by Hannu Savolainen 1993-1997
8 *
9 * OSS/Free for Linux is distributed under the GNU GENERAL PUBLIC LICENSE (GPL)
10 * Version 2 (June 1991). See the "COPYING" file distributed with this software
11 * for more info.
12 *
13 *
14 * Thomas Sailer ioctl code reworked (vmalloc/vfree removed)
15 * Alan Cox modularisation, use normal request_irq, use dev_id
16 * Bartlomiej Zolnierkiewicz removed some __init to allow using many drivers
17 * Chris Rankin Update the module-usage counter for the coprocessor
18 * Zwane Mwaikambo Changed attach/unload resource freeing
19 */
20
21 #include <linux/module.h>
22 #include <linux/init.h>
23 #include <linux/interrupt.h>
24 #include <linux/spinlock.h>
25 #define USE_SEQ_MACROS
26 #define USE_SIMPLE_MACROS
27
28 #include "sound_config.h"
29
30 #include "coproc.h"
31 #include "mpu401.h"
32
33 static int timer_mode = TMR_INTERNAL, timer_caps = TMR_INTERNAL;
34
35 struct mpu_config
36 {
37 int base; /*
38 * I/O base
39 */
40 int irq;
41 int opened; /*
42 * Open mode
43 */
44 int devno;
45 int synthno;
46 int uart_mode;
47 int initialized;
48 int mode;
49 #define MODE_MIDI 1
50 #define MODE_SYNTH 2
51 unsigned char version, revision;
52 unsigned int capabilities;
53 #define MPU_CAP_INTLG 0x10000000
54 #define MPU_CAP_SYNC 0x00000010
55 #define MPU_CAP_FSK 0x00000020
56 #define MPU_CAP_CLS 0x00000040
57 #define MPU_CAP_SMPTE 0x00000080
58 #define MPU_CAP_2PORT 0x00000001
59 int timer_flag;
60
61 #define MBUF_MAX 10
62 #define BUFTEST(dc) if (dc->m_ptr >= MBUF_MAX || dc->m_ptr < 0) \
63 {printk( "MPU: Invalid buffer pointer %d/%d, s=%d\n", dc->m_ptr, dc->m_left, dc->m_state);dc->m_ptr--;}
64 int m_busy;
65 unsigned char m_buf[MBUF_MAX];
66 int m_ptr;
67 int m_state;
68 int m_left;
69 unsigned char last_status;
70 void (*inputintr) (int dev, unsigned char data);
71 int shared_irq;
72 int *osp;
73 spinlock_t lock;
74 };
75
76 #define DATAPORT(base) (base)
77 #define COMDPORT(base) (base+1)
78 #define STATPORT(base) (base+1)
79
80
81 static void mpu401_close(int dev);
82
83 static inline int mpu401_status(struct mpu_config *devc)
84 {
85 return inb(STATPORT(devc->base));
86 }
87
88 #define input_avail(devc) (!(mpu401_status(devc)&INPUT_AVAIL))
89 #define output_ready(devc) (!(mpu401_status(devc)&OUTPUT_READY))
90
91 static inline void write_command(struct mpu_config *devc, unsigned char cmd)
92 {
93 outb(cmd, COMDPORT(devc->base));
94 }
95
96 static inline int read_data(struct mpu_config *devc)
97 {
98 return inb(DATAPORT(devc->base));
99 }
100
101 static inline void write_data(struct mpu_config *devc, unsigned char byte)
102 {
103 outb(byte, DATAPORT(devc->base));
104 }
105
106 #define OUTPUT_READY 0x40
107 #define INPUT_AVAIL 0x80
108 #define MPU_ACK 0xFE
109 #define MPU_RESET 0xFF
110 #define UART_MODE_ON 0x3F
111
112 static struct mpu_config dev_conf[MAX_MIDI_DEV];
113
114 static int n_mpu_devs;
115
116 static int reset_mpu401(struct mpu_config *devc);
117 static void set_uart_mode(int dev, struct mpu_config *devc, int arg);
118
119 static int mpu_timer_init(int midi_dev);
120 static void mpu_timer_interrupt(void);
121 static void timer_ext_event(struct mpu_config *devc, int event, int parm);
122
123 static struct synth_info mpu_synth_info_proto = {
124 "MPU-401 MIDI interface",
125 0,
126 SYNTH_TYPE_MIDI,
127 MIDI_TYPE_MPU401,
128 0, 128,
129 0, 128,
130 SYNTH_CAP_INPUT
131 };
132
133 static struct synth_info mpu_synth_info[MAX_MIDI_DEV];
134
135 /*
136 * States for the input scanner
137 */
138
139 #define ST_INIT 0 /* Ready for timing byte or msg */
140 #define ST_TIMED 1 /* Leading timing byte rcvd */
141 #define ST_DATABYTE 2 /* Waiting for (nr_left) data bytes */
142
143 #define ST_SYSMSG 100 /* System message (sysx etc). */
144 #define ST_SYSEX 101 /* System exclusive msg */
145 #define ST_MTC 102 /* Midi Time Code (MTC) qframe msg */
146 #define ST_SONGSEL 103 /* Song select */
147 #define ST_SONGPOS 104 /* Song position pointer */
148
149 static unsigned char len_tab[] = /* # of data bytes following a status
150 */
151 {
152 2, /* 8x */
153 2, /* 9x */
154 2, /* Ax */
155 2, /* Bx */
156 1, /* Cx */
157 1, /* Dx */
158 2, /* Ex */
159 0 /* Fx */
160 };
161
162 #define STORE(cmd) \
163 { \
164 int len; \
165 unsigned char obuf[8]; \
166 cmd; \
167 seq_input_event(obuf, len); \
168 }
169
170 #define _seqbuf obuf
171 #define _seqbufptr 0
172 #define _SEQ_ADVBUF(x) len=x
173
174 static int mpu_input_scanner(struct mpu_config *devc, unsigned char midic)
175 {
176
177 switch (devc->m_state)
178 {
179 case ST_INIT:
180 switch (midic)
181 {
182 case 0xf8:
183 /* Timer overflow */
184 break;
185
186 case 0xfc:
187 printk("<all end>");
188 break;
189
190 case 0xfd:
191 if (devc->timer_flag)
192 mpu_timer_interrupt();
193 break;
194
195 case 0xfe:
196 return MPU_ACK;
197
198 case 0xf0:
199 case 0xf1:
200 case 0xf2:
201 case 0xf3:
202 case 0xf4:
203 case 0xf5:
204 case 0xf6:
205 case 0xf7:
206 printk("<Trk data rq #%d>", midic & 0x0f);
207 break;
208
209 case 0xf9:
210 printk("<conductor rq>");
211 break;
212
213 case 0xff:
214 devc->m_state = ST_SYSMSG;
215 break;
216
217 default:
218 if (midic <= 0xef)
219 {
220 /* printk( "mpu time: %d ", midic); */
221 devc->m_state = ST_TIMED;
222 }
223 else
224 printk("<MPU: Unknown event %02x> ", midic);
225 }
226 break;
227
228 case ST_TIMED:
229 {
230 int msg = ((int) (midic & 0xf0) >> 4);
231
232 devc->m_state = ST_DATABYTE;
233
234 if (msg < 8) /* Data byte */
235 {
236 /* printk( "midi msg (running status) "); */
237 msg = ((int) (devc->last_status & 0xf0) >> 4);
238 msg -= 8;
239 devc->m_left = len_tab[msg] - 1;
240
241 devc->m_ptr = 2;
242 devc->m_buf[0] = devc->last_status;
243 devc->m_buf[1] = midic;
244
245 if (devc->m_left <= 0)
246 {
247 devc->m_state = ST_INIT;
248 do_midi_msg(devc->synthno, devc->m_buf, devc->m_ptr);
249 devc->m_ptr = 0;
250 }
251 }
252 else if (msg == 0xf) /* MPU MARK */
253 {
254 devc->m_state = ST_INIT;
255
256 switch (midic)
257 {
258 case 0xf8:
259 /* printk( "NOP "); */
260 break;
261
262 case 0xf9:
263 /* printk( "meas end "); */
264 break;
265
266 case 0xfc:
267 /* printk( "data end "); */
268 break;
269
270 default:
271 printk("Unknown MPU mark %02x\n", midic);
272 }
273 }
274 else
275 {
276 devc->last_status = midic;
277 /* printk( "midi msg "); */
278 msg -= 8;
279 devc->m_left = len_tab[msg];
280
281 devc->m_ptr = 1;
282 devc->m_buf[0] = midic;
283
284 if (devc->m_left <= 0)
285 {
286 devc->m_state = ST_INIT;
287 do_midi_msg(devc->synthno, devc->m_buf, devc->m_ptr);
288 devc->m_ptr = 0;
289 }
290 }
291 }
292 break;
293
294 case ST_SYSMSG:
295 switch (midic)
296 {
297 case 0xf0:
298 printk("<SYX>");
299 devc->m_state = ST_SYSEX;
300 break;
301
302 case 0xf1:
303 devc->m_state = ST_MTC;
304 break;
305
306 case 0xf2:
307 devc->m_state = ST_SONGPOS;
308 devc->m_ptr = 0;
309 break;
310
311 case 0xf3:
312 devc->m_state = ST_SONGSEL;
313 break;
314
315 case 0xf6:
316 /* printk( "tune_request\n"); */
317 devc->m_state = ST_INIT;
318
319 /*
320 * Real time messages
321 */
322 case 0xf8:
323 /* midi clock */
324 devc->m_state = ST_INIT;
325 timer_ext_event(devc, TMR_CLOCK, 0);
326 break;
327
328 case 0xfA:
329 devc->m_state = ST_INIT;
330 timer_ext_event(devc, TMR_START, 0);
331 break;
332
333 case 0xFB:
334 devc->m_state = ST_INIT;
335 timer_ext_event(devc, TMR_CONTINUE, 0);
336 break;
337
338 case 0xFC:
339 devc->m_state = ST_INIT;
340 timer_ext_event(devc, TMR_STOP, 0);
341 break;
342
343 case 0xFE:
344 /* active sensing */
345 devc->m_state = ST_INIT;
346 break;
347
348 case 0xff:
349 /* printk( "midi hard reset"); */
350 devc->m_state = ST_INIT;
351 break;
352
353 default:
354 printk("unknown MIDI sysmsg %0x\n", midic);
355 devc->m_state = ST_INIT;
356 }
357 break;
358
359 case ST_MTC:
360 devc->m_state = ST_INIT;
361 printk("MTC frame %x02\n", midic);
362 break;
363
364 case ST_SYSEX:
365 if (midic == 0xf7)
366 {
367 printk("<EOX>");
368 devc->m_state = ST_INIT;
369 }
370 else
371 printk("%02x ", midic);
372 break;
373
374 case ST_SONGPOS:
375 BUFTEST(devc);
376 devc->m_buf[devc->m_ptr++] = midic;
377 if (devc->m_ptr == 2)
378 {
379 devc->m_state = ST_INIT;
380 devc->m_ptr = 0;
381 timer_ext_event(devc, TMR_SPP,
382 ((devc->m_buf[1] & 0x7f) << 7) |
383 (devc->m_buf[0] & 0x7f));
384 }
385 break;
386
387 case ST_DATABYTE:
388 BUFTEST(devc);
389 devc->m_buf[devc->m_ptr++] = midic;
390 if ((--devc->m_left) <= 0)
391 {
392 devc->m_state = ST_INIT;
393 do_midi_msg(devc->synthno, devc->m_buf, devc->m_ptr);
394 devc->m_ptr = 0;
395 }
396 break;
397
398 default:
399 printk("Bad state %d ", devc->m_state);
400 devc->m_state = ST_INIT;
401 }
402 return 1;
403 }
404
405 static void mpu401_input_loop(struct mpu_config *devc)
406 {
407 unsigned long flags;
408 int busy;
409 int n;
410
411 spin_lock_irqsave(&devc->lock,flags);
412 busy = devc->m_busy;
413 devc->m_busy = 1;
414 spin_unlock_irqrestore(&devc->lock,flags);
415
416 if (busy) /* Already inside the scanner */
417 return;
418
419 n = 50;
420
421 while (input_avail(devc) && n-- > 0)
422 {
423 unsigned char c = read_data(devc);
424
425 if (devc->mode == MODE_SYNTH)
426 {
427 mpu_input_scanner(devc, c);
428 }
429 else if (devc->opened & OPEN_READ && devc->inputintr != NULL)
430 devc->inputintr(devc->devno, c);
431 }
432 devc->m_busy = 0;
433 }
434
435 static irqreturn_t mpuintr(int irq, void *dev_id)
436 {
437 struct mpu_config *devc;
438 int dev = (int)(unsigned long) dev_id;
439 int handled = 0;
440
441 devc = &dev_conf[dev];
442
443 if (input_avail(devc))
444 {
445 handled = 1;
446 if (devc->base != 0 && (devc->opened & OPEN_READ || devc->mode == MODE_SYNTH))
447 mpu401_input_loop(devc);
448 else
449 {
450 /* Dummy read (just to acknowledge the interrupt) */
451 read_data(devc);
452 }
453 }
454 return IRQ_RETVAL(handled);
455 }
456
457 static int mpu401_open(int dev, int mode,
458 void (*input) (int dev, unsigned char data),
459 void (*output) (int dev)
460 )
461 {
462 int err;
463 struct mpu_config *devc;
464 struct coproc_operations *coprocessor;
465
466 if (dev < 0 || dev >= num_midis || midi_devs[dev] == NULL)
467 return -ENXIO;
468
469 devc = &dev_conf[dev];
470
471 if (devc->opened)
472 return -EBUSY;
473 /*
474 * Verify that the device is really running.
475 * Some devices (such as Ensoniq SoundScape don't
476 * work before the on board processor (OBP) is initialized
477 * by downloading its microcode.
478 */
479
480 if (!devc->initialized)
481 {
482 if (mpu401_status(devc) == 0xff) /* Bus float */
483 {
484 printk(KERN_ERR "mpu401: Device not initialized properly\n");
485 return -EIO;
486 }
487 reset_mpu401(devc);
488 }
489
490 if ( (coprocessor = midi_devs[dev]->coproc) != NULL )
491 {
492 if (!try_module_get(coprocessor->owner)) {
493 mpu401_close(dev);
494 return -ENODEV;
495 }
496
497 if ((err = coprocessor->open(coprocessor->devc, COPR_MIDI)) < 0)
498 {
499 printk(KERN_WARNING "MPU-401: Can't access coprocessor device\n");
500 mpu401_close(dev);
501 return err;
502 }
503 }
504
505 set_uart_mode(dev, devc, 1);
506 devc->mode = MODE_MIDI;
507 devc->synthno = 0;
508
509 mpu401_input_loop(devc);
510
511 devc->inputintr = input;
512 devc->opened = mode;
513
514 return 0;
515 }
516
517 static void mpu401_close(int dev)
518 {
519 struct mpu_config *devc;
520 struct coproc_operations *coprocessor;
521
522 devc = &dev_conf[dev];
523 if (devc->uart_mode)
524 reset_mpu401(devc); /*
525 * This disables the UART mode
526 */
527 devc->mode = 0;
528 devc->inputintr = NULL;
529
530 coprocessor = midi_devs[dev]->coproc;
531 if (coprocessor) {
532 coprocessor->close(coprocessor->devc, COPR_MIDI);
533 module_put(coprocessor->owner);
534 }
535 devc->opened = 0;
536 }
537
538 static int mpu401_out(int dev, unsigned char midi_byte)
539 {
540 int timeout;
541 unsigned long flags;
542
543 struct mpu_config *devc;
544
545 devc = &dev_conf[dev];
546
547 /*
548 * Sometimes it takes about 30000 loops before the output becomes ready
549 * (After reset). Normally it takes just about 10 loops.
550 */
551
552 for (timeout = 30000; timeout > 0 && !output_ready(devc); timeout--);
553
554 spin_lock_irqsave(&devc->lock,flags);
555 if (!output_ready(devc))
556 {
557 printk(KERN_WARNING "mpu401: Send data timeout\n");
558 spin_unlock_irqrestore(&devc->lock,flags);
559 return 0;
560 }
561 write_data(devc, midi_byte);
562 spin_unlock_irqrestore(&devc->lock,flags);
563 return 1;
564 }
565
566 static int mpu401_command(int dev, mpu_command_rec * cmd)
567 {
568 int i, timeout, ok;
569 int ret = 0;
570 unsigned long flags;
571 struct mpu_config *devc;
572
573 devc = &dev_conf[dev];
574
575 if (devc->uart_mode) /*
576 * Not possible in UART mode
577 */
578 {
579 printk(KERN_WARNING "mpu401: commands not possible in the UART mode\n");
580 return -EINVAL;
581 }
582 /*
583 * Test for input since pending input seems to block the output.
584 */
585 if (input_avail(devc))
586 mpu401_input_loop(devc);
587
588 /*
589 * Sometimes it takes about 50000 loops before the output becomes ready
590 * (After reset). Normally it takes just about 10 loops.
591 */
592
593 timeout = 50000;
594 retry:
595 if (timeout-- <= 0)
596 {
597 printk(KERN_WARNING "mpu401: Command (0x%x) timeout\n", (int) cmd->cmd);
598 return -EIO;
599 }
600 spin_lock_irqsave(&devc->lock,flags);
601
602 if (!output_ready(devc))
603 {
604 spin_unlock_irqrestore(&devc->lock,flags);
605 goto retry;
606 }
607 write_command(devc, cmd->cmd);
608
609 ok = 0;
610 for (timeout = 50000; timeout > 0 && !ok; timeout--)
611 {
612 if (input_avail(devc))
613 {
614 if (devc->opened && devc->mode == MODE_SYNTH)
615 {
616 if (mpu_input_scanner(devc, read_data(devc)) == MPU_ACK)
617 ok = 1;
618 }
619 else
620 {
621 /* Device is not currently open. Use simpler method */
622 if (read_data(devc) == MPU_ACK)
623 ok = 1;
624 }
625 }
626 }
627 if (!ok)
628 {
629 spin_unlock_irqrestore(&devc->lock,flags);
630 return -EIO;
631 }
632 if (cmd->nr_args)
633 {
634 for (i = 0; i < cmd->nr_args; i++)
635 {
636 for (timeout = 3000; timeout > 0 && !output_ready(devc); timeout--);
637
638 if (!mpu401_out(dev, cmd->data[i]))
639 {
640 spin_unlock_irqrestore(&devc->lock,flags);
641 printk(KERN_WARNING "mpu401: Command (0x%x), parm send failed.\n", (int) cmd->cmd);
642 return -EIO;
643 }
644 }
645 }
646 ret = 0;
647 cmd->data[0] = 0;
648
649 if (cmd->nr_returns)
650 {
651 for (i = 0; i < cmd->nr_returns; i++)
652 {
653 ok = 0;
654 for (timeout = 5000; timeout > 0 && !ok; timeout--)
655 if (input_avail(devc))
656 {
657 cmd->data[i] = read_data(devc);
658 ok = 1;
659 }
660 if (!ok)
661 {
662 spin_unlock_irqrestore(&devc->lock,flags);
663 return -EIO;
664 }
665 }
666 }
667 spin_unlock_irqrestore(&devc->lock,flags);
668 return ret;
669 }
670
671 static int mpu_cmd(int dev, int cmd, int data)
672 {
673 int ret;
674
675 static mpu_command_rec rec;
676
677 rec.cmd = cmd & 0xff;
678 rec.nr_args = ((cmd & 0xf0) == 0xE0);
679 rec.nr_returns = ((cmd & 0xf0) == 0xA0);
680 rec.data[0] = data & 0xff;
681
682 if ((ret = mpu401_command(dev, &rec)) < 0)
683 return ret;
684 return (unsigned char) rec.data[0];
685 }
686
687 static int mpu401_prefix_cmd(int dev, unsigned char status)
688 {
689 struct mpu_config *devc = &dev_conf[dev];
690
691 if (devc->uart_mode)
692 return 1;
693
694 if (status < 0xf0)
695 {
696 if (mpu_cmd(dev, 0xD0, 0) < 0)
697 return 0;
698 return 1;
699 }
700 switch (status)
701 {
702 case 0xF0:
703 if (mpu_cmd(dev, 0xDF, 0) < 0)
704 return 0;
705 return 1;
706
707 default:
708 return 0;
709 }
710 }
711
712 static int mpu401_start_read(int dev)
713 {
714 return 0;
715 }
716
717 static int mpu401_end_read(int dev)
718 {
719 return 0;
720 }
721
722 static int mpu401_ioctl(int dev, unsigned cmd, void __user *arg)
723 {
724 struct mpu_config *devc;
725 mpu_command_rec rec;
726 int val, ret;
727
728 devc = &dev_conf[dev];
729 switch (cmd)
730 {
731 case SNDCTL_MIDI_MPUMODE:
732 if (!(devc->capabilities & MPU_CAP_INTLG)) { /* No intelligent mode */
733 printk(KERN_WARNING "mpu401: Intelligent mode not supported by the HW\n");
734 return -EINVAL;
735 }
736 if (get_user(val, (int __user *)arg))
737 return -EFAULT;
738 set_uart_mode(dev, devc, !val);
739 return 0;
740
741 case SNDCTL_MIDI_MPUCMD:
742 if (copy_from_user(&rec, arg, sizeof(rec)))
743 return -EFAULT;
744 if ((ret = mpu401_command(dev, &rec)) < 0)
745 return ret;
746 if (copy_to_user(arg, &rec, sizeof(rec)))
747 return -EFAULT;
748 return 0;
749
750 default:
751 return -EINVAL;
752 }
753 }
754
755 static void mpu401_kick(int dev)
756 {
757 }
758
759 static int mpu401_buffer_status(int dev)
760 {
761 return 0; /*
762 * No data in buffers
763 */
764 }
765
766 static int mpu_synth_ioctl(int dev, unsigned int cmd, void __user *arg)
767 {
768 int midi_dev;
769 struct mpu_config *devc;
770
771 midi_dev = synth_devs[dev]->midi_dev;
772
773 if (midi_dev < 0 || midi_dev > num_midis || midi_devs[midi_dev] == NULL)
774 return -ENXIO;
775
776 devc = &dev_conf[midi_dev];
777
778 switch (cmd)
779 {
780
781 case SNDCTL_SYNTH_INFO:
782 if (copy_to_user(arg, &mpu_synth_info[midi_dev],
783 sizeof(struct synth_info)))
784 return -EFAULT;
785 return 0;
786
787 case SNDCTL_SYNTH_MEMAVL:
788 return 0x7fffffff;
789
790 default:
791 return -EINVAL;
792 }
793 }
794
795 static int mpu_synth_open(int dev, int mode)
796 {
797 int midi_dev, err;
798 struct mpu_config *devc;
799 struct coproc_operations *coprocessor;
800
801 midi_dev = synth_devs[dev]->midi_dev;
802
803 if (midi_dev < 0 || midi_dev > num_midis || midi_devs[midi_dev] == NULL)
804 return -ENXIO;
805
806 devc = &dev_conf[midi_dev];
807
808 /*
809 * Verify that the device is really running.
810 * Some devices (such as Ensoniq SoundScape don't
811 * work before the on board processor (OBP) is initialized
812 * by downloading its microcode.
813 */
814
815 if (!devc->initialized)
816 {
817 if (mpu401_status(devc) == 0xff) /* Bus float */
818 {
819 printk(KERN_ERR "mpu401: Device not initialized properly\n");
820 return -EIO;
821 }
822 reset_mpu401(devc);
823 }
824 if (devc->opened)
825 return -EBUSY;
826 devc->mode = MODE_SYNTH;
827 devc->synthno = dev;
828
829 devc->inputintr = NULL;
830
831 coprocessor = midi_devs[midi_dev]->coproc;
832 if (coprocessor) {
833 if (!try_module_get(coprocessor->owner))
834 return -ENODEV;
835
836 if ((err = coprocessor->open(coprocessor->devc, COPR_MIDI)) < 0)
837 {
838 printk(KERN_WARNING "mpu401: Can't access coprocessor device\n");
839 return err;
840 }
841 }
842 devc->opened = mode;
843 reset_mpu401(devc);
844
845 if (mode & OPEN_READ)
846 {
847 mpu_cmd(midi_dev, 0x8B, 0); /* Enable data in stop mode */
848 mpu_cmd(midi_dev, 0x34, 0); /* Return timing bytes in stop mode */
849 mpu_cmd(midi_dev, 0x87, 0); /* Enable pitch & controller */
850 }
851 return 0;
852 }
853
854 static void mpu_synth_close(int dev)
855 {
856 int midi_dev;
857 struct mpu_config *devc;
858 struct coproc_operations *coprocessor;
859
860 midi_dev = synth_devs[dev]->midi_dev;
861
862 devc = &dev_conf[midi_dev];
863 mpu_cmd(midi_dev, 0x15, 0); /* Stop recording, playback and MIDI */
864 mpu_cmd(midi_dev, 0x8a, 0); /* Disable data in stopped mode */
865
866 devc->inputintr = NULL;
867
868 coprocessor = midi_devs[midi_dev]->coproc;
869 if (coprocessor) {
870 coprocessor->close(coprocessor->devc, COPR_MIDI);
871 module_put(coprocessor->owner);
872 }
873 devc->opened = 0;
874 devc->mode = 0;
875 }
876
877 #define MIDI_SYNTH_NAME "MPU-401 UART Midi"
878 #define MIDI_SYNTH_CAPS SYNTH_CAP_INPUT
879 #include "midi_synth.h"
880
881 static struct synth_operations mpu401_synth_proto =
882 {
883 .owner = THIS_MODULE,
884 .id = "MPU401",
885 .info = NULL,
886 .midi_dev = 0,
887 .synth_type = SYNTH_TYPE_MIDI,
888 .synth_subtype = 0,
889 .open = mpu_synth_open,
890 .close = mpu_synth_close,
891 .ioctl = mpu_synth_ioctl,
892 .kill_note = midi_synth_kill_note,
893 .start_note = midi_synth_start_note,
894 .set_instr = midi_synth_set_instr,
895 .reset = midi_synth_reset,
896 .hw_control = midi_synth_hw_control,
897 .load_patch = midi_synth_load_patch,
898 .aftertouch = midi_synth_aftertouch,
899 .controller = midi_synth_controller,
900 .panning = midi_synth_panning,
901 .bender = midi_synth_bender,
902 .setup_voice = midi_synth_setup_voice,
903 .send_sysex = midi_synth_send_sysex
904 };
905
906 static struct synth_operations *mpu401_synth_operations[MAX_MIDI_DEV];
907
908 static struct midi_operations mpu401_midi_proto =
909 {
910 .owner = THIS_MODULE,
911 .info = {"MPU-401 Midi", 0, MIDI_CAP_MPU401, SNDCARD_MPU401},
912 .in_info = {0},
913 .open = mpu401_open,
914 .close = mpu401_close,
915 .ioctl = mpu401_ioctl,
916 .outputc = mpu401_out,
917 .start_read = mpu401_start_read,
918 .end_read = mpu401_end_read,
919 .kick = mpu401_kick,
920 .buffer_status = mpu401_buffer_status,
921 .prefix_cmd = mpu401_prefix_cmd
922 };
923
924 static struct midi_operations mpu401_midi_operations[MAX_MIDI_DEV];
925
926 static void mpu401_chk_version(int n, struct mpu_config *devc)
927 {
928 int tmp;
929 unsigned long flags;
930
931 devc->version = devc->revision = 0;
932
933 spin_lock_irqsave(&devc->lock,flags);
934 if ((tmp = mpu_cmd(n, 0xAC, 0)) < 0)
935 {
936 spin_unlock_irqrestore(&devc->lock,flags);
937 return;
938 }
939 if ((tmp & 0xf0) > 0x20) /* Why it's larger than 2.x ??? */
940 {
941 spin_unlock_irqrestore(&devc->lock,flags);
942 return;
943 }
944 devc->version = tmp;
945
946 if ((tmp = mpu_cmd(n, 0xAD, 0)) < 0)
947 {
948 devc->version = 0;
949 spin_unlock_irqrestore(&devc->lock,flags);
950 return;
951 }
952 devc->revision = tmp;
953 spin_unlock_irqrestore(&devc->lock,flags);
954 }
955
956 int attach_mpu401(struct address_info *hw_config, struct module *owner)
957 {
958 unsigned long flags;
959 char revision_char;
960
961 int m, ret;
962 struct mpu_config *devc;
963
964 hw_config->slots[1] = -1;
965 m = sound_alloc_mididev();
966 if (m == -1)
967 {
968 printk(KERN_WARNING "MPU-401: Too many midi devices detected\n");
969 ret = -ENOMEM;
970 goto out_err;
971 }
972 devc = &dev_conf[m];
973 devc->base = hw_config->io_base;
974 devc->osp = hw_config->osp;
975 devc->irq = hw_config->irq;
976 devc->opened = 0;
977 devc->uart_mode = 0;
978 devc->initialized = 0;
979 devc->version = 0;
980 devc->revision = 0;
981 devc->capabilities = 0;
982 devc->timer_flag = 0;
983 devc->m_busy = 0;
984 devc->m_state = ST_INIT;
985 devc->shared_irq = hw_config->always_detect;
986 devc->irq = hw_config->irq;
987 spin_lock_init(&devc->lock);
988
989 if (devc->irq < 0)
990 {
991 devc->irq *= -1;
992 devc->shared_irq = 1;
993 }
994
995 if (!hw_config->always_detect)
996 {
997 /* Verify the hardware again */
998 if (!reset_mpu401(devc))
999 {
1000 printk(KERN_WARNING "mpu401: Device didn't respond\n");
1001 ret = -ENODEV;
1002 goto out_mididev;
1003 }
1004 if (!devc->shared_irq)
1005 {
1006 if (request_irq(devc->irq, mpuintr, 0, "mpu401", (void *)m) < 0)
1007 {
1008 printk(KERN_WARNING "mpu401: Failed to allocate IRQ%d\n", devc->irq);
1009 ret = -ENOMEM;
1010 goto out_mididev;
1011 }
1012 }
1013 spin_lock_irqsave(&devc->lock,flags);
1014 mpu401_chk_version(m, devc);
1015 if (devc->version == 0)
1016 mpu401_chk_version(m, devc);
1017 spin_unlock_irqrestore(&devc->lock,flags);
1018 }
1019
1020 if (devc->version != 0)
1021 if (mpu_cmd(m, 0xC5, 0) >= 0) /* Set timebase OK */
1022 if (mpu_cmd(m, 0xE0, 120) >= 0) /* Set tempo OK */
1023 devc->capabilities |= MPU_CAP_INTLG; /* Supports intelligent mode */
1024
1025
1026 mpu401_synth_operations[m] = kmalloc(sizeof(struct synth_operations), GFP_KERNEL);
1027
1028 if (mpu401_synth_operations[m] == NULL)
1029 {
1030 printk(KERN_ERR "mpu401: Can't allocate memory\n");
1031 ret = -ENOMEM;
1032 goto out_irq;
1033 }
1034 if (!(devc->capabilities & MPU_CAP_INTLG)) /* No intelligent mode */
1035 {
1036 memcpy((char *) mpu401_synth_operations[m],
1037 (char *) &std_midi_synth,
1038 sizeof(struct synth_operations));
1039 }
1040 else
1041 {
1042 memcpy((char *) mpu401_synth_operations[m],
1043 (char *) &mpu401_synth_proto,
1044 sizeof(struct synth_operations));
1045 }
1046 if (owner)
1047 mpu401_synth_operations[m]->owner = owner;
1048
1049 memcpy((char *) &mpu401_midi_operations[m],
1050 (char *) &mpu401_midi_proto,
1051 sizeof(struct midi_operations));
1052
1053 mpu401_midi_operations[m].converter = mpu401_synth_operations[m];
1054
1055 memcpy((char *) &mpu_synth_info[m],
1056 (char *) &mpu_synth_info_proto,
1057 sizeof(struct synth_info));
1058
1059 n_mpu_devs++;
1060
1061 if (devc->version == 0x20 && devc->revision >= 0x07) /* MusicQuest interface */
1062 {
1063 int ports = (devc->revision & 0x08) ? 32 : 16;
1064
1065 devc->capabilities |= MPU_CAP_SYNC | MPU_CAP_SMPTE |
1066 MPU_CAP_CLS | MPU_CAP_2PORT;
1067
1068 revision_char = (devc->revision == 0x7f) ? 'M' : ' ';
1069 sprintf(mpu_synth_info[m].name, "MQX-%d%c MIDI Interface #%d",
1070 ports,
1071 revision_char,
1072 n_mpu_devs);
1073 }
1074 else
1075 {
1076 revision_char = devc->revision ? devc->revision + '@' : ' ';
1077 if ((int) devc->revision > ('Z' - '@'))
1078 revision_char = '+';
1079
1080 devc->capabilities |= MPU_CAP_SYNC | MPU_CAP_FSK;
1081
1082 if (hw_config->name)
1083 sprintf(mpu_synth_info[m].name, "%s (MPU401)", hw_config->name);
1084 else
1085 sprintf(mpu_synth_info[m].name,
1086 "MPU-401 %d.%d%c Midi interface #%d",
1087 (int) (devc->version & 0xf0) >> 4,
1088 devc->version & 0x0f,
1089 revision_char,
1090 n_mpu_devs);
1091 }
1092
1093 strcpy(mpu401_midi_operations[m].info.name,
1094 mpu_synth_info[m].name);
1095
1096 conf_printf(mpu_synth_info[m].name, hw_config);
1097
1098 mpu401_synth_operations[m]->midi_dev = devc->devno = m;
1099 mpu401_synth_operations[devc->devno]->info = &mpu_synth_info[devc->devno];
1100
1101 if (devc->capabilities & MPU_CAP_INTLG) /* Intelligent mode */
1102 hw_config->slots[2] = mpu_timer_init(m);
1103
1104 midi_devs[m] = &mpu401_midi_operations[devc->devno];
1105
1106 if (owner)
1107 midi_devs[m]->owner = owner;
1108
1109 hw_config->slots[1] = m;
1110 sequencer_init();
1111
1112 return 0;
1113
1114 out_irq:
1115 free_irq(devc->irq, (void *)m);
1116 out_mididev:
1117 sound_unload_mididev(m);
1118 out_err:
1119 release_region(hw_config->io_base, 2);
1120 return ret;
1121 }
1122
1123 static int reset_mpu401(struct mpu_config *devc)
1124 {
1125 unsigned long flags;
1126 int ok, timeout, n;
1127 int timeout_limit;
1128
1129 /*
1130 * Send the RESET command. Try again if no success at the first time.
1131 * (If the device is in the UART mode, it will not ack the reset cmd).
1132 */
1133
1134 ok = 0;
1135
1136 timeout_limit = devc->initialized ? 30000 : 100000;
1137 devc->initialized = 1;
1138
1139 for (n = 0; n < 2 && !ok; n++)
1140 {
1141 for (timeout = timeout_limit; timeout > 0 && !ok; timeout--)
1142 ok = output_ready(devc);
1143
1144 write_command(devc, MPU_RESET); /*
1145 * Send MPU-401 RESET Command
1146 */
1147
1148 /*
1149 * Wait at least 25 msec. This method is not accurate so let's make the
1150 * loop bit longer. Cannot sleep since this is called during boot.
1151 */
1152
1153 for (timeout = timeout_limit * 2; timeout > 0 && !ok; timeout--)
1154 {
1155 spin_lock_irqsave(&devc->lock,flags);
1156 if (input_avail(devc))
1157 if (read_data(devc) == MPU_ACK)
1158 ok = 1;
1159 spin_unlock_irqrestore(&devc->lock,flags);
1160 }
1161
1162 }
1163
1164 devc->m_state = ST_INIT;
1165 devc->m_ptr = 0;
1166 devc->m_left = 0;
1167 devc->last_status = 0;
1168 devc->uart_mode = 0;
1169
1170 return ok;
1171 }
1172
1173 static void set_uart_mode(int dev, struct mpu_config *devc, int arg)
1174 {
1175 if (!arg && (devc->capabilities & MPU_CAP_INTLG))
1176 return;
1177 if ((devc->uart_mode == 0) == (arg == 0))
1178 return; /* Already set */
1179 reset_mpu401(devc); /* This exits the uart mode */
1180
1181 if (arg)
1182 {
1183 if (mpu_cmd(dev, UART_MODE_ON, 0) < 0)
1184 {
1185 printk(KERN_ERR "mpu401: Can't enter UART mode\n");
1186 devc->uart_mode = 0;
1187 return;
1188 }
1189 }
1190 devc->uart_mode = arg;
1191
1192 }
1193
1194 int probe_mpu401(struct address_info *hw_config, struct resource *ports)
1195 {
1196 int ok = 0;
1197 struct mpu_config tmp_devc;
1198
1199 tmp_devc.base = hw_config->io_base;
1200 tmp_devc.irq = hw_config->irq;
1201 tmp_devc.initialized = 0;
1202 tmp_devc.opened = 0;
1203 tmp_devc.osp = hw_config->osp;
1204
1205 if (hw_config->always_detect)
1206 return 1;
1207
1208 if (inb(hw_config->io_base + 1) == 0xff)
1209 {
1210 DDB(printk("MPU401: Port %x looks dead.\n", hw_config->io_base));
1211 return 0; /* Just bus float? */
1212 }
1213 ok = reset_mpu401(&tmp_devc);
1214
1215 if (!ok)
1216 {
1217 DDB(printk("MPU401: Reset failed on port %x\n", hw_config->io_base));
1218 }
1219 return ok;
1220 }
1221
1222 void unload_mpu401(struct address_info *hw_config)
1223 {
1224 void *p;
1225 int n=hw_config->slots[1];
1226
1227 if (n != -1) {
1228 release_region(hw_config->io_base, 2);
1229 if (hw_config->always_detect == 0 && hw_config->irq > 0)
1230 free_irq(hw_config->irq, (void *)n);
1231 p=mpu401_synth_operations[n];
1232 sound_unload_mididev(n);
1233 sound_unload_timerdev(hw_config->slots[2]);
1234 kfree(p);
1235 }
1236 }
1237
1238 /*****************************************************
1239 * Timer stuff
1240 ****************************************************/
1241
1242 static volatile int timer_initialized = 0, timer_open = 0, tmr_running = 0;
1243 static volatile int curr_tempo, curr_timebase, hw_timebase;
1244 static int max_timebase = 8; /* 8*24=192 ppqn */
1245 static volatile unsigned long next_event_time;
1246 static volatile unsigned long curr_ticks, curr_clocks;
1247 static unsigned long prev_event_time;
1248 static int metronome_mode;
1249
1250 static unsigned long clocks2ticks(unsigned long clocks)
1251 {
1252 /*
1253 * The MPU-401 supports just a limited set of possible timebase values.
1254 * Since the applications require more choices, the driver has to
1255 * program the HW to do its best and to convert between the HW and
1256 * actual timebases.
1257 */
1258 return ((clocks * curr_timebase) + (hw_timebase / 2)) / hw_timebase;
1259 }
1260
1261 static void set_timebase(int midi_dev, int val)
1262 {
1263 int hw_val;
1264
1265 if (val < 48)
1266 val = 48;
1267 if (val > 1000)
1268 val = 1000;
1269
1270 hw_val = val;
1271 hw_val = (hw_val + 12) / 24;
1272 if (hw_val > max_timebase)
1273 hw_val = max_timebase;
1274
1275 if (mpu_cmd(midi_dev, 0xC0 | (hw_val & 0x0f), 0) < 0)
1276 {
1277 printk(KERN_WARNING "mpu401: Can't set HW timebase to %d\n", hw_val * 24);
1278 return;
1279 }
1280 hw_timebase = hw_val * 24;
1281 curr_timebase = val;
1282
1283 }
1284
1285 static void tmr_reset(struct mpu_config *devc)
1286 {
1287 unsigned long flags;
1288
1289 spin_lock_irqsave(&devc->lock,flags);
1290 next_event_time = (unsigned long) -1;
1291 prev_event_time = 0;
1292 curr_ticks = curr_clocks = 0;
1293 spin_unlock_irqrestore(&devc->lock,flags);
1294 }
1295
1296 static void set_timer_mode(int midi_dev)
1297 {
1298 if (timer_mode & TMR_MODE_CLS)
1299 mpu_cmd(midi_dev, 0x3c, 0); /* Use CLS sync */
1300 else if (timer_mode & TMR_MODE_SMPTE)
1301 mpu_cmd(midi_dev, 0x3d, 0); /* Use SMPTE sync */
1302
1303 if (timer_mode & TMR_INTERNAL)
1304 {
1305 mpu_cmd(midi_dev, 0x80, 0); /* Use MIDI sync */
1306 }
1307 else
1308 {
1309 if (timer_mode & (TMR_MODE_MIDI | TMR_MODE_CLS))
1310 {
1311 mpu_cmd(midi_dev, 0x82, 0); /* Use MIDI sync */
1312 mpu_cmd(midi_dev, 0x91, 0); /* Enable ext MIDI ctrl */
1313 }
1314 else if (timer_mode & TMR_MODE_FSK)
1315 mpu_cmd(midi_dev, 0x81, 0); /* Use FSK sync */
1316 }
1317 }
1318
1319 static void stop_metronome(int midi_dev)
1320 {
1321 mpu_cmd(midi_dev, 0x84, 0); /* Disable metronome */
1322 }
1323
1324 static void setup_metronome(int midi_dev)
1325 {
1326 int numerator, denominator;
1327 int clks_per_click, num_32nds_per_beat;
1328 int beats_per_measure;
1329
1330 numerator = ((unsigned) metronome_mode >> 24) & 0xff;
1331 denominator = ((unsigned) metronome_mode >> 16) & 0xff;
1332 clks_per_click = ((unsigned) metronome_mode >> 8) & 0xff;
1333 num_32nds_per_beat = (unsigned) metronome_mode & 0xff;
1334 beats_per_measure = (numerator * 4) >> denominator;
1335
1336 if (!metronome_mode)
1337 mpu_cmd(midi_dev, 0x84, 0); /* Disable metronome */
1338 else
1339 {
1340 mpu_cmd(midi_dev, 0xE4, clks_per_click);
1341 mpu_cmd(midi_dev, 0xE6, beats_per_measure);
1342 mpu_cmd(midi_dev, 0x83, 0); /* Enable metronome without accents */
1343 }
1344 }
1345
1346 static int mpu_start_timer(int midi_dev)
1347 {
1348 struct mpu_config *devc= &dev_conf[midi_dev];
1349
1350 tmr_reset(devc);
1351 set_timer_mode(midi_dev);
1352
1353 if (tmr_running)
1354 return TIMER_NOT_ARMED; /* Already running */
1355
1356 if (timer_mode & TMR_INTERNAL)
1357 {
1358 mpu_cmd(midi_dev, 0x02, 0); /* Send MIDI start */
1359 tmr_running = 1;
1360 return TIMER_NOT_ARMED;
1361 }
1362 else
1363 {
1364 mpu_cmd(midi_dev, 0x35, 0); /* Enable mode messages to PC */
1365 mpu_cmd(midi_dev, 0x38, 0); /* Enable sys common messages to PC */
1366 mpu_cmd(midi_dev, 0x39, 0); /* Enable real time messages to PC */
1367 mpu_cmd(midi_dev, 0x97, 0); /* Enable system exclusive messages to PC */
1368 }
1369 return TIMER_ARMED;
1370 }
1371
1372 static int mpu_timer_open(int dev, int mode)
1373 {
1374 int midi_dev = sound_timer_devs[dev]->devlink;
1375 struct mpu_config *devc= &dev_conf[midi_dev];
1376
1377 if (timer_open)
1378 return -EBUSY;
1379
1380 tmr_reset(devc);
1381 curr_tempo = 50;
1382 mpu_cmd(midi_dev, 0xE0, 50);
1383 curr_timebase = hw_timebase = 120;
1384 set_timebase(midi_dev, 120);
1385 timer_open = 1;
1386 metronome_mode = 0;
1387 set_timer_mode(midi_dev);
1388
1389 mpu_cmd(midi_dev, 0xe7, 0x04); /* Send all clocks to host */
1390 mpu_cmd(midi_dev, 0x95, 0); /* Enable clock to host */
1391
1392 return 0;
1393 }
1394
1395 static void mpu_timer_close(int dev)
1396 {
1397 int midi_dev = sound_timer_devs[dev]->devlink;
1398
1399 timer_open = tmr_running = 0;
1400 mpu_cmd(midi_dev, 0x15, 0); /* Stop all */
1401 mpu_cmd(midi_dev, 0x94, 0); /* Disable clock to host */
1402 mpu_cmd(midi_dev, 0x8c, 0); /* Disable measure end messages to host */
1403 stop_metronome(midi_dev);
1404 }
1405
1406 static int mpu_timer_event(int dev, unsigned char *event)
1407 {
1408 unsigned char command = event[1];
1409 unsigned long parm = *(unsigned int *) &event[4];
1410 int midi_dev = sound_timer_devs[dev]->devlink;
1411
1412 switch (command)
1413 {
1414 case TMR_WAIT_REL:
1415 parm += prev_event_time;
1416 case TMR_WAIT_ABS:
1417 if (parm > 0)
1418 {
1419 long time;
1420
1421 if (parm <= curr_ticks) /* It's the time */
1422 return TIMER_NOT_ARMED;
1423 time = parm;
1424 next_event_time = prev_event_time = time;
1425
1426 return TIMER_ARMED;
1427 }
1428 break;
1429
1430 case TMR_START:
1431 if (tmr_running)
1432 break;
1433 return mpu_start_timer(midi_dev);
1434
1435 case TMR_STOP:
1436 mpu_cmd(midi_dev, 0x01, 0); /* Send MIDI stop */
1437 stop_metronome(midi_dev);
1438 tmr_running = 0;
1439 break;
1440
1441 case TMR_CONTINUE:
1442 if (tmr_running)
1443 break;
1444 mpu_cmd(midi_dev, 0x03, 0); /* Send MIDI continue */
1445 setup_metronome(midi_dev);
1446 tmr_running = 1;
1447 break;
1448
1449 case TMR_TEMPO:
1450 if (parm)
1451 {
1452 if (parm < 8)
1453 parm = 8;
1454 if (parm > 250)
1455 parm = 250;
1456 if (mpu_cmd(midi_dev, 0xE0, parm) < 0)
1457 printk(KERN_WARNING "mpu401: Can't set tempo to %d\n", (int) parm);
1458 curr_tempo = parm;
1459 }
1460 break;
1461
1462 case TMR_ECHO:
1463 seq_copy_to_input(event, 8);
1464 break;
1465
1466 case TMR_TIMESIG:
1467 if (metronome_mode) /* Metronome enabled */
1468 {
1469 metronome_mode = parm;
1470 setup_metronome(midi_dev);
1471 }
1472 break;
1473
1474 default:;
1475 }
1476 return TIMER_NOT_ARMED;
1477 }
1478
1479 static unsigned long mpu_timer_get_time(int dev)
1480 {
1481 if (!timer_open)
1482 return 0;
1483
1484 return curr_ticks;
1485 }
1486
1487 static int mpu_timer_ioctl(int dev, unsigned int command, void __user *arg)
1488 {
1489 int midi_dev = sound_timer_devs[dev]->devlink;
1490 int __user *p = (int __user *)arg;
1491
1492 switch (command)
1493 {
1494 case SNDCTL_TMR_SOURCE:
1495 {
1496 int parm;
1497
1498 if (get_user(parm, p))
1499 return -EFAULT;
1500 parm &= timer_caps;
1501
1502 if (parm != 0)
1503 {
1504 timer_mode = parm;
1505
1506 if (timer_mode & TMR_MODE_CLS)
1507 mpu_cmd(midi_dev, 0x3c, 0); /* Use CLS sync */
1508 else if (timer_mode & TMR_MODE_SMPTE)
1509 mpu_cmd(midi_dev, 0x3d, 0); /* Use SMPTE sync */
1510 }
1511 if (put_user(timer_mode, p))
1512 return -EFAULT;
1513 return timer_mode;
1514 }
1515 break;
1516
1517 case SNDCTL_TMR_START:
1518 mpu_start_timer(midi_dev);
1519 return 0;
1520
1521 case SNDCTL_TMR_STOP:
1522 tmr_running = 0;
1523 mpu_cmd(midi_dev, 0x01, 0); /* Send MIDI stop */
1524 stop_metronome(midi_dev);
1525 return 0;
1526
1527 case SNDCTL_TMR_CONTINUE:
1528 if (tmr_running)
1529 return 0;
1530 tmr_running = 1;
1531 mpu_cmd(midi_dev, 0x03, 0); /* Send MIDI continue */
1532 return 0;
1533
1534 case SNDCTL_TMR_TIMEBASE:
1535 {
1536 int val;
1537 if (get_user(val, p))
1538 return -EFAULT;
1539 if (val)
1540 set_timebase(midi_dev, val);
1541 if (put_user(curr_timebase, p))
1542 return -EFAULT;
1543 return curr_timebase;
1544 }
1545 break;
1546
1547 case SNDCTL_TMR_TEMPO:
1548 {
1549 int val;
1550 int ret;
1551
1552 if (get_user(val, p))
1553 return -EFAULT;
1554
1555 if (val)
1556 {
1557 if (val < 8)
1558 val = 8;
1559 if (val > 250)
1560 val = 250;
1561 if ((ret = mpu_cmd(midi_dev, 0xE0, val)) < 0)
1562 {
1563 printk(KERN_WARNING "mpu401: Can't set tempo to %d\n", (int) val);
1564 return ret;
1565 }
1566 curr_tempo = val;
1567 }
1568 if (put_user(curr_tempo, p))
1569 return -EFAULT;
1570 return curr_tempo;
1571 }
1572 break;
1573
1574 case SNDCTL_SEQ_CTRLRATE:
1575 {
1576 int val;
1577 if (get_user(val, p))
1578 return -EFAULT;
1579
1580 if (val != 0) /* Can't change */
1581 return -EINVAL;
1582 val = ((curr_tempo * curr_timebase) + 30)/60;
1583 if (put_user(val, p))
1584 return -EFAULT;
1585 return val;
1586 }
1587 break;
1588
1589 case SNDCTL_SEQ_GETTIME:
1590 if (put_user(curr_ticks, p))
1591 return -EFAULT;
1592 return curr_ticks;
1593
1594 case SNDCTL_TMR_METRONOME:
1595 if (get_user(metronome_mode, p))
1596 return -EFAULT;
1597 setup_metronome(midi_dev);
1598 return 0;
1599
1600 default:;
1601 }
1602 return -EINVAL;
1603 }
1604
1605 static void mpu_timer_arm(int dev, long time)
1606 {
1607 if (time < 0)
1608 time = curr_ticks + 1;
1609 else if (time <= curr_ticks) /* It's the time */
1610 return;
1611 next_event_time = prev_event_time = time;
1612 return;
1613 }
1614
1615 static struct sound_timer_operations mpu_timer =
1616 {
1617 .owner = THIS_MODULE,
1618 .info = {"MPU-401 Timer", 0},
1619 .priority = 10, /* Priority */
1620 .devlink = 0, /* Local device link */
1621 .open = mpu_timer_open,
1622 .close = mpu_timer_close,
1623 .event = mpu_timer_event,
1624 .get_time = mpu_timer_get_time,
1625 .ioctl = mpu_timer_ioctl,
1626 .arm_timer = mpu_timer_arm
1627 };
1628
1629 static void mpu_timer_interrupt(void)
1630 {
1631 if (!timer_open)
1632 return;
1633
1634 if (!tmr_running)
1635 return;
1636
1637 curr_clocks++;
1638 curr_ticks = clocks2ticks(curr_clocks);
1639
1640 if (curr_ticks >= next_event_time)
1641 {
1642 next_event_time = (unsigned long) -1;
1643 sequencer_timer(0);
1644 }
1645 }
1646
1647 static void timer_ext_event(struct mpu_config *devc, int event, int parm)
1648 {
1649 int midi_dev = devc->devno;
1650
1651 if (!devc->timer_flag)
1652 return;
1653
1654 switch (event)
1655 {
1656 case TMR_CLOCK:
1657 printk("<MIDI clk>");
1658 break;
1659
1660 case TMR_START:
1661 printk("Ext MIDI start\n");
1662 if (!tmr_running)
1663 {
1664 if (timer_mode & TMR_EXTERNAL)
1665 {
1666 tmr_running = 1;
1667 setup_metronome(midi_dev);
1668 next_event_time = 0;
1669 STORE(SEQ_START_TIMER());
1670 }
1671 }
1672 break;
1673
1674 case TMR_STOP:
1675 printk("Ext MIDI stop\n");
1676 if (timer_mode & TMR_EXTERNAL)
1677 {
1678 tmr_running = 0;
1679 stop_metronome(midi_dev);
1680 STORE(SEQ_STOP_TIMER());
1681 }
1682 break;
1683
1684 case TMR_CONTINUE:
1685 printk("Ext MIDI continue\n");
1686 if (timer_mode & TMR_EXTERNAL)
1687 {
1688 tmr_running = 1;
1689 setup_metronome(midi_dev);
1690 STORE(SEQ_CONTINUE_TIMER());
1691 }
1692 break;
1693
1694 case TMR_SPP:
1695 printk("Songpos: %d\n", parm);
1696 if (timer_mode & TMR_EXTERNAL)
1697 {
1698 STORE(SEQ_SONGPOS(parm));
1699 }
1700 break;
1701 }
1702 }
1703
1704 static int mpu_timer_init(int midi_dev)
1705 {
1706 struct mpu_config *devc;
1707 int n;
1708
1709 devc = &dev_conf[midi_dev];
1710
1711 if (timer_initialized)
1712 return -1; /* There is already a similar timer */
1713
1714 timer_initialized = 1;
1715
1716 mpu_timer.devlink = midi_dev;
1717 dev_conf[midi_dev].timer_flag = 1;
1718
1719 n = sound_alloc_timerdev();
1720 if (n == -1)
1721 n = 0;
1722 sound_timer_devs[n] = &mpu_timer;
1723
1724 if (devc->version < 0x20) /* Original MPU-401 */
1725 timer_caps = TMR_INTERNAL | TMR_EXTERNAL | TMR_MODE_FSK | TMR_MODE_MIDI;
1726 else
1727 {
1728 /*
1729 * The version number 2.0 is used (at least) by the
1730 * MusicQuest cards and the Roland Super-MPU.
1731 *
1732 * MusicQuest has given a special meaning to the bits of the
1733 * revision number. The Super-MPU returns 0.
1734 */
1735
1736 if (devc->revision)
1737 timer_caps |= TMR_EXTERNAL | TMR_MODE_MIDI;
1738
1739 if (devc->revision & 0x02)
1740 timer_caps |= TMR_MODE_CLS;
1741
1742
1743 if (devc->revision & 0x40)
1744 max_timebase = 10; /* Has the 216 and 240 ppqn modes */
1745 }
1746
1747 timer_mode = (TMR_INTERNAL | TMR_MODE_MIDI) & timer_caps;
1748 return n;
1749
1750 }
1751
1752 EXPORT_SYMBOL(probe_mpu401);
1753 EXPORT_SYMBOL(attach_mpu401);
1754 EXPORT_SYMBOL(unload_mpu401);
1755
1756 static struct address_info cfg;
1757
1758 static int io = -1;
1759 static int irq = -1;
1760
1761 module_param(irq, int, 0);
1762 module_param(io, int, 0);
1763
1764 static int __init init_mpu401(void)
1765 {
1766 int ret;
1767 /* Can be loaded either for module use or to provide functions
1768 to others */
1769 if (io != -1 && irq != -1) {
1770 struct resource *ports;
1771 cfg.irq = irq;
1772 cfg.io_base = io;
1773 ports = request_region(io, 2, "mpu401");
1774 if (!ports)
1775 return -EBUSY;
1776 if (probe_mpu401(&cfg, ports) == 0) {
1777 release_region(io, 2);
1778 return -ENODEV;
1779 }
1780 if ((ret = attach_mpu401(&cfg, THIS_MODULE)))
1781 return ret;
1782 }
1783
1784 return 0;
1785 }
1786
1787 static void __exit cleanup_mpu401(void)
1788 {
1789 if (io != -1 && irq != -1) {
1790 /* Check for use by, for example, sscape driver */
1791 unload_mpu401(&cfg);
1792 }
1793 }
1794
1795 module_init(init_mpu401);
1796 module_exit(cleanup_mpu401);
1797
1798 #ifndef MODULE
1799 static int __init setup_mpu401(char *str)
1800 {
1801 /* io, irq */
1802 int ints[3];
1803
1804 str = get_options(str, ARRAY_SIZE(ints), ints);
1805
1806 io = ints[1];
1807 irq = ints[2];
1808
1809 return 1;
1810 }
1811
1812 __setup("mpu401=", setup_mpu401);
1813 #endif
1814 MODULE_LICENSE("GPL");
linux 2.6 git repository for openrd