m68knommu: convert to asm-generic/hardirq.h

[linux-2.6/linux-2.6-openrd.git] / drivers / ata / pata_sil680.c

/*
 * pata_sil680.c        - SIL680 PATA for new ATA layer
 *                        (C) 2005 Red Hat Inc
 *
 * based upon
 *
 * linux/drivers/ide/pci/siimage.c              Version 1.07    Nov 30, 2003
 *
 * Copyright (C) 2001-2002      Andre Hedrick <andre@linux-ide.org>
 * Copyright (C) 2003           Red Hat <alan@redhat.com>
 *
 *  May be copied or modified under the terms of the GNU General Public License
 *
 *  Documentation publically available.
 *
 *      If you have strange problems with nVidia chipset systems please
 *      see the SI support documentation and update your system BIOS
 *      if necessary
 *
 * TODO
 *      If we know all our devices are LBA28 (or LBA28 sized)  we could use
 *      the command fifo mode.
 */

#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/pci.h>
#include <linux/init.h>
#include <linux/blkdev.h>
#include <linux/delay.h>
#include <scsi/scsi_host.h>
#include <linux/libata.h>

#define DRV_NAME "pata_sil680"
#define DRV_VERSION "0.4.9"

#define SIL680_MMIO_BAR         5

/**
 *      sil680_selreg           -       return register base
 *      @hwif: interface
 *      @r: config offset
 *
 *      Turn a config register offset into the right address in either
 *      PCI space or MMIO space to access the control register in question
 *      Thankfully this is a configuration operation so isnt performance
 *      criticial.
 */

static unsigned long sil680_selreg(struct ata_port *ap, int r)
{
        unsigned long base = 0xA0 + r;
        base += (ap->port_no << 4);
        return base;
}

/**
 *      sil680_seldev           -       return register base
 *      @hwif: interface
 *      @r: config offset
 *
 *      Turn a config register offset into the right address in either
 *      PCI space or MMIO space to access the control register in question
 *      including accounting for the unit shift.
 */

static unsigned long sil680_seldev(struct ata_port *ap, struct ata_device *adev, int r)
{
        unsigned long base = 0xA0 + r;
        base += (ap->port_no << 4);
        base |= adev->devno ? 2 : 0;
        return base;
}


/**
 *      sil680_cable_detect     -       cable detection
 *      @ap: ATA port
 *
 *      Perform cable detection. The SIL680 stores this in PCI config
 *      space for us.
 */

static int sil680_cable_detect(struct ata_port *ap) {
        struct pci_dev *pdev = to_pci_dev(ap->host->dev);
        unsigned long addr = sil680_selreg(ap, 0);
        u8 ata66;
        pci_read_config_byte(pdev, addr, &ata66);
        if (ata66 & 1)
                return ATA_CBL_PATA80;
        else
                return ATA_CBL_PATA40;
}

/**
 *      sil680_set_piomode      -       set initial PIO mode data
 *      @ap: ATA interface
 *      @adev: ATA device
 *
 *      Program the SIL680 registers for PIO mode. Note that the task speed
 *      registers are shared between the devices so we must pick the lowest
 *      mode for command work.
 */

static void sil680_set_piomode(struct ata_port *ap, struct ata_device *adev)
{
        static u16 speed_p[5] = { 0x328A, 0x2283, 0x1104, 0x10C3, 0x10C1 };
        static u16 speed_t[5] = { 0x328A, 0x2283, 0x1281, 0x10C3, 0x10C1 };

        unsigned long tfaddr = sil680_selreg(ap, 0x02);
        unsigned long addr = sil680_seldev(ap, adev, 0x04);
        unsigned long addr_mask = 0x80 + 4 * ap->port_no;
        struct pci_dev *pdev = to_pci_dev(ap->host->dev);
        int pio = adev->pio_mode - XFER_PIO_0;
        int lowest_pio = pio;
        int port_shift = 4 * adev->devno;
        u16 reg;
        u8 mode;

        struct ata_device *pair = ata_dev_pair(adev);

        if (pair != NULL && adev->pio_mode > pair->pio_mode)
                lowest_pio = pair->pio_mode - XFER_PIO_0;

        pci_write_config_word(pdev, addr, speed_p[pio]);
        pci_write_config_word(pdev, tfaddr, speed_t[lowest_pio]);

        pci_read_config_word(pdev, tfaddr-2, &reg);
        pci_read_config_byte(pdev, addr_mask, &mode);

        reg &= ~0x0200;                 /* Clear IORDY */
        mode &= ~(3 << port_shift);     /* Clear IORDY and DMA bits */

        if (ata_pio_need_iordy(adev)) {
                reg |= 0x0200;          /* Enable IORDY */
                mode |= 1 << port_shift;
        }
        pci_write_config_word(pdev, tfaddr-2, reg);
        pci_write_config_byte(pdev, addr_mask, mode);
}

/**
 *      sil680_set_dmamode      -       set initial DMA mode data
 *      @ap: ATA interface
 *      @adev: ATA device
 *
 *      Program the MWDMA/UDMA modes for the sil680 k
 *      chipset. The MWDMA mode values are pulled from a lookup table
 *      while the chipset uses mode number for UDMA.
 */

static void sil680_set_dmamode(struct ata_port *ap, struct ata_device *adev)
{
        static u8 ultra_table[2][7] = {
                { 0x0C, 0x07, 0x05, 0x04, 0x02, 0x01, 0xFF },   /* 100MHz */
                { 0x0F, 0x0B, 0x07, 0x05, 0x03, 0x02, 0x01 },   /* 133Mhz */
        };
        static u16 dma_table[3] = { 0x2208, 0x10C2, 0x10C1 };

        struct pci_dev *pdev = to_pci_dev(ap->host->dev);
        unsigned long ma = sil680_seldev(ap, adev, 0x08);
        unsigned long ua = sil680_seldev(ap, adev, 0x0C);
        unsigned long addr_mask = 0x80 + 4 * ap->port_no;
        int port_shift = adev->devno * 4;
        u8 scsc, mode;
        u16 multi, ultra;

        pci_read_config_byte(pdev, 0x8A, &scsc);
        pci_read_config_byte(pdev, addr_mask, &mode);
        pci_read_config_word(pdev, ma, &multi);
        pci_read_config_word(pdev, ua, &ultra);

        /* Mask timing bits */
        ultra &= ~0x3F;
        mode &= ~(0x03 << port_shift);

        /* Extract scsc */
        scsc = (scsc & 0x30) ? 1: 0;

        if (adev->dma_mode >= XFER_UDMA_0) {
                multi = 0x10C1;
                ultra |= ultra_table[scsc][adev->dma_mode - XFER_UDMA_0];
                mode |= (0x03 << port_shift);
        } else {
                multi = dma_table[adev->dma_mode - XFER_MW_DMA_0];
                mode |= (0x02 << port_shift);
        }
        pci_write_config_byte(pdev, addr_mask, mode);
        pci_write_config_word(pdev, ma, multi);
        pci_write_config_word(pdev, ua, ultra);
}

static struct scsi_host_template sil680_sht = {
        ATA_BMDMA_SHT(DRV_NAME),
};

static struct ata_port_operations sil680_port_ops = {
        .inherits       = &ata_bmdma32_port_ops,
        .cable_detect   = sil680_cable_detect,
        .set_piomode    = sil680_set_piomode,
        .set_dmamode    = sil680_set_dmamode,
};

/**
 *      sil680_init_chip                -       chip setup
 *      @pdev: PCI device
 *
 *      Perform all the chip setup which must be done both when the device
 *      is powered up on boot and when we resume in case we resumed from RAM.
 *      Returns the final clock settings.
 */

static u8 sil680_init_chip(struct pci_dev *pdev, int *try_mmio)
{
        u32 class_rev   = 0;
        u8 tmpbyte      = 0;

        pci_read_config_dword(pdev, PCI_CLASS_REVISION, &class_rev);
        class_rev &= 0xff;
        /* FIXME: double check */
        pci_write_config_byte(pdev, PCI_CACHE_LINE_SIZE, (class_rev) ? 1 : 255);

        pci_write_config_byte(pdev, 0x80, 0x00);
        pci_write_config_byte(pdev, 0x84, 0x00);

        pci_read_config_byte(pdev, 0x8A, &tmpbyte);

        dev_dbg(&pdev->dev, "sil680: BA5_EN = %d clock = %02X\n",
                tmpbyte & 1, tmpbyte & 0x30);

        *try_mmio = 0;
#ifdef CONFIG_PPC
        if (machine_is(cell))
                *try_mmio = (tmpbyte & 1) || pci_resource_start(pdev, 5);
#endif

        switch(tmpbyte & 0x30) {
                case 0x00:
                        /* 133 clock attempt to force it on */
                        pci_write_config_byte(pdev, 0x8A, tmpbyte|0x10);
                        break;
                case 0x30:
                        /* if clocking is disabled */
                        /* 133 clock attempt to force it on */
                        pci_write_config_byte(pdev, 0x8A, tmpbyte & ~0x20);
                        break;
                case 0x10:
                        /* 133 already */
                        break;
                case 0x20:
                        /* BIOS set PCI x2 clocking */
                        break;
        }

        pci_read_config_byte(pdev,   0x8A, &tmpbyte);
        dev_dbg(&pdev->dev, "sil680: BA5_EN = %d clock = %02X\n",
                tmpbyte & 1, tmpbyte & 0x30);

        pci_write_config_byte(pdev,  0xA1, 0x72);
        pci_write_config_word(pdev,  0xA2, 0x328A);
        pci_write_config_dword(pdev, 0xA4, 0x62DD62DD);
        pci_write_config_dword(pdev, 0xA8, 0x43924392);
        pci_write_config_dword(pdev, 0xAC, 0x40094009);
        pci_write_config_byte(pdev,  0xB1, 0x72);
        pci_write_config_word(pdev,  0xB2, 0x328A);
        pci_write_config_dword(pdev, 0xB4, 0x62DD62DD);
        pci_write_config_dword(pdev, 0xB8, 0x43924392);
        pci_write_config_dword(pdev, 0xBC, 0x40094009);

        switch(tmpbyte & 0x30) {
                case 0x00: printk(KERN_INFO "sil680: 100MHz clock.\n");break;
                case 0x10: printk(KERN_INFO "sil680: 133MHz clock.\n");break;
                case 0x20: printk(KERN_INFO "sil680: Using PCI clock.\n");break;
                /* This last case is _NOT_ ok */
                case 0x30: printk(KERN_ERR "sil680: Clock disabled ?\n");
        }
        return tmpbyte & 0x30;
}

static int __devinit sil680_init_one(struct pci_dev *pdev,
                                     const struct pci_device_id *id)
{
        static const struct ata_port_info info = {
                .flags = ATA_FLAG_SLAVE_POSS,
                .pio_mask = ATA_PIO4,
                .mwdma_mask = ATA_MWDMA2,
                .udma_mask = ATA_UDMA6,
                .port_ops = &sil680_port_ops
        };
        static const struct ata_port_info info_slow = {
                .flags = ATA_FLAG_SLAVE_POSS,
                .pio_mask = ATA_PIO4,
                .mwdma_mask = ATA_MWDMA2,
                .udma_mask = ATA_UDMA5,
                .port_ops = &sil680_port_ops
        };
        const struct ata_port_info *ppi[] = { &info, NULL };
        static int printed_version;
        struct ata_host *host;
        void __iomem *mmio_base;
        int rc, try_mmio;

        if (!printed_version++)
                dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n");

        rc = pcim_enable_device(pdev);
        if (rc)
                return rc;

        switch (sil680_init_chip(pdev, &try_mmio)) {
                case 0:
                        ppi[0] = &info_slow;
                        break;
                case 0x30:
                        return -ENODEV;
        }

        if (!try_mmio)
                goto use_ioports;

        /* Try to acquire MMIO resources and fallback to PIO if
         * that fails
         */
        rc = pcim_iomap_regions(pdev, 1 << SIL680_MMIO_BAR, DRV_NAME);
        if (rc)
                goto use_ioports;

        /* Allocate host and set it up */
        host = ata_host_alloc_pinfo(&pdev->dev, ppi, 2);
        if (!host)
                return -ENOMEM;
        host->iomap = pcim_iomap_table(pdev);

        /* Setup DMA masks */
        rc = pci_set_dma_mask(pdev, ATA_DMA_MASK);
        if (rc)
                return rc;
        rc = pci_set_consistent_dma_mask(pdev, ATA_DMA_MASK);
        if (rc)
                return rc;
        pci_set_master(pdev);

        /* Get MMIO base and initialize port addresses */
        mmio_base = host->iomap[SIL680_MMIO_BAR];
        host->ports[0]->ioaddr.bmdma_addr = mmio_base + 0x00;
        host->ports[0]->ioaddr.cmd_addr = mmio_base + 0x80;
        host->ports[0]->ioaddr.ctl_addr = mmio_base + 0x8a;
        host->ports[0]->ioaddr.altstatus_addr = mmio_base + 0x8a;
        ata_sff_std_ports(&host->ports[0]->ioaddr);
        host->ports[1]->ioaddr.bmdma_addr = mmio_base + 0x08;
        host->ports[1]->ioaddr.cmd_addr = mmio_base + 0xc0;
        host->ports[1]->ioaddr.ctl_addr = mmio_base + 0xca;
        host->ports[1]->ioaddr.altstatus_addr = mmio_base + 0xca;
        ata_sff_std_ports(&host->ports[1]->ioaddr);

        /* Register & activate */
        return ata_host_activate(host, pdev->irq, ata_sff_interrupt,
                                 IRQF_SHARED, &sil680_sht);

use_ioports:
        return ata_pci_sff_init_one(pdev, ppi, &sil680_sht, NULL);
}

#ifdef CONFIG_PM
static int sil680_reinit_one(struct pci_dev *pdev)
{
        struct ata_host *host = dev_get_drvdata(&pdev->dev);
        int try_mmio, rc;

        rc = ata_pci_device_do_resume(pdev);
        if (rc)
                return rc;
        sil680_init_chip(pdev, &try_mmio);
        ata_host_resume(host);
        return 0;
}
#endif

static const struct pci_device_id sil680[] = {
        { PCI_VDEVICE(CMD, PCI_DEVICE_ID_SII_680), },

        { },
};

static struct pci_driver sil680_pci_driver = {
        .name           = DRV_NAME,
        .id_table       = sil680,
        .probe          = sil680_init_one,
        .remove         = ata_pci_remove_one,
#ifdef CONFIG_PM
        .suspend        = ata_pci_device_suspend,
        .resume         = sil680_reinit_one,
#endif
};

static int __init sil680_init(void)
{
        return pci_register_driver(&sil680_pci_driver);
}

static void __exit sil680_exit(void)
{
        pci_unregister_driver(&sil680_pci_driver);
}

MODULE_AUTHOR("Alan Cox");
MODULE_DESCRIPTION("low-level driver for SI680 PATA");
MODULE_LICENSE("GPL");
MODULE_DEVICE_TABLE(pci, sil680);
MODULE_VERSION(DRV_VERSION);

module_init(sil680_init);
module_exit(sil680_exit);