3 * by Ken Hollis (khollis@bitgate.com)
5 * Permission granted from Simon Machell (smachell@berkprod.com)
6 * Written for the Linux Kernel, and GPLed by Ken Hollis
8 * 960107 Added request_region routines, modulized the whole thing.
9 * 960108 Fixed end-of-file pointer (Thanks to Dan Hollis), added
11 * 960216 Added eof marker on the file, and changed verbose messages.
12 * 960716 Made functional and cosmetic changes to the source for
13 * inclusion in Linux 2.0.x kernels, thanks to Alan Cox.
14 * 960717 Removed read/seek routines, replaced with ioctl. Also, added
15 * check_region command due to Alan's suggestion.
16 * 960821 Made changes to compile in newer 2.0.x kernels. Added
17 * "cold reboot sense" entry.
18 * 960825 Made a few changes to code, deleted some defines and made
19 * typedefs to replace them. Made heartbeat reset only available
20 * via ioctl, and removed the write routine.
21 * 960828 Added new items for PC Watchdog Rev.C card.
22 * 960829 Changed around all of the IOCTLs, added new features,
23 * added watchdog disable/re-enable routines. Added firmware
24 * version reporting. Added read routine for temperature.
25 * Removed some extra defines, added an autodetect Revision
27 * 961006 Revised some documentation, fixed some cosmetic bugs. Made
28 * drivers to panic the system if it's overheating at bootup.
29 * 961118 Changed some verbiage on some of the output, tidied up
30 * code bits, and added compatibility to 2.1.x.
31 * 970912 Enabled board on open and disable on close.
32 * 971107 Took account of recent VFS changes (broke read).
33 * 971210 Disable board on initialisation in case board already ticking.
34 * 971222 Changed open/close for temperature handling
35 * Michael Meskes <meskes@debian.org>.
36 * 980112 Used minor numbers from include/linux/miscdevice.h
37 * 990403 Clear reset status after reading control status register in
38 * pcwd_showprevstate(). [Marc Boucher <marc@mbsi.ca>]
39 * 990605 Made changes to code to support Firmware 1.22a, added
40 * fairly useless proc entry.
41 * 990610 removed said useless proc code for the merge <alan>
42 * 000403 Removed last traces of proc code. <davej>
43 * 011214 Added nowayout module option to override
44 * CONFIG_WATCHDOG_NOWAYOUT <Matt_Domsch@dell.com>
45 * Added timeout module option to override default
49 * A bells and whistles driver is available from http://www.pcwd.de/
50 * More info available at http://www.berkprod.com/ or
51 * http://www.pcwatchdog.com/
54 #include <linux/module.h> /* For module specific items */
55 #include <linux/moduleparam.h> /* For new moduleparam's */
56 #include <linux/types.h> /* For standard types (like size_t) */
57 #include <linux/errno.h> /* For the -ENODEV/... values */
58 #include <linux/kernel.h> /* For printk/panic/... */
59 #include <linux/delay.h> /* For mdelay function */
60 #include <linux/timer.h> /* For timer related operations */
61 #include <linux/jiffies.h> /* For jiffies stuff */
62 #include <linux/miscdevice.h> /* For MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR) */
63 #include <linux/watchdog.h> /* For the watchdog specific items */
64 #include <linux/reboot.h> /* For kernel_power_off() */
65 #include <linux/init.h> /* For __init/__exit/... */
66 #include <linux/fs.h> /* For file operations */
67 #include <linux/isa.h> /* For isa devices */
68 #include <linux/ioport.h> /* For io-port access */
69 #include <linux/spinlock.h> /* For spin_lock/spin_unlock/... */
70 #include <linux/uaccess.h> /* For copy_to_user/put_user/... */
71 #include <linux/io.h> /* For inb/outb/... */
73 /* Module and version information */
74 #define WATCHDOG_VERSION "1.20"
75 #define WATCHDOG_DATE "18 Feb 2007"
76 #define WATCHDOG_DRIVER_NAME "ISA-PC Watchdog"
77 #define WATCHDOG_NAME "pcwd"
78 #define PFX WATCHDOG_NAME ": "
79 #define DRIVER_VERSION WATCHDOG_DRIVER_NAME " driver, v" WATCHDOG_VERSION "\n"
82 * It should be noted that PCWD_REVISION_B was removed because A and B
83 * are essentially the same types of card, with the exception that B
84 * has temperature reporting. Since I didn't receive a Rev.B card,
85 * the Rev.B card is not supported. (It's a good thing too, as they
86 * are no longer in production.)
88 #define PCWD_REVISION_A 1
89 #define PCWD_REVISION_C 2
92 * These are the auto-probe addresses available.
94 * Revision A only uses ports 0x270 and 0x370. Revision C introduced 0x350.
95 * Revision A has an address range of 2 addresses, while Revision C has 4.
97 #define PCWD_ISA_NR_CARDS 3
98 static int pcwd_ioports
[] = { 0x270, 0x350, 0x370, 0x000 };
101 * These are the defines that describe the control status bits for the
102 * PCI-PC Watchdog card.
104 /* Port 1 : Control Status #1 for the PC Watchdog card, revision A. */
105 #define WD_WDRST 0x01 /* Previously reset state */
106 #define WD_T110 0x02 /* Temperature overheat sense */
107 #define WD_HRTBT 0x04 /* Heartbeat sense */
108 #define WD_RLY2 0x08 /* External relay triggered */
109 #define WD_SRLY2 0x80 /* Software external relay triggered */
110 /* Port 1 : Control Status #1 for the PC Watchdog card, revision C. */
111 #define WD_REVC_WTRP 0x01 /* Watchdog Trip status */
112 #define WD_REVC_HRBT 0x02 /* Watchdog Heartbeat */
113 #define WD_REVC_TTRP 0x04 /* Temperature Trip status */
114 #define WD_REVC_RL2A 0x08 /* Relay 2 activated by
115 on-board processor */
116 #define WD_REVC_RL1A 0x10 /* Relay 1 active */
117 #define WD_REVC_R2DS 0x40 /* Relay 2 disable */
118 #define WD_REVC_RLY2 0x80 /* Relay 2 activated? */
119 /* Port 2 : Control Status #2 */
120 #define WD_WDIS 0x10 /* Watchdog Disabled */
121 #define WD_ENTP 0x20 /* Watchdog Enable Temperature Trip */
122 #define WD_SSEL 0x40 /* Watchdog Switch Select
124 #define WD_WCMD 0x80 /* Watchdog Command Mode */
126 /* max. time we give an ISA watchdog card to process a command */
127 /* 500ms for each 4 bit response (according to spec.) */
128 #define ISA_COMMAND_TIMEOUT 1000
130 /* Watchdog's internal commands */
131 #define CMD_ISA_IDLE 0x00
132 #define CMD_ISA_VERSION_INTEGER 0x01
133 #define CMD_ISA_VERSION_TENTH 0x02
134 #define CMD_ISA_VERSION_HUNDRETH 0x03
135 #define CMD_ISA_VERSION_MINOR 0x04
136 #define CMD_ISA_SWITCH_SETTINGS 0x05
137 #define CMD_ISA_RESET_PC 0x06
138 #define CMD_ISA_ARM_0 0x07
139 #define CMD_ISA_ARM_30 0x08
140 #define CMD_ISA_ARM_60 0x09
141 #define CMD_ISA_DELAY_TIME_2SECS 0x0A
142 #define CMD_ISA_DELAY_TIME_4SECS 0x0B
143 #define CMD_ISA_DELAY_TIME_8SECS 0x0C
144 #define CMD_ISA_RESET_RELAYS 0x0D
146 /* Watchdog's Dip Switch heartbeat values */
147 static const int heartbeat_tbl
[] = {
148 20, /* OFF-OFF-OFF = 20 Sec */
149 40, /* OFF-OFF-ON = 40 Sec */
150 60, /* OFF-ON-OFF = 1 Min */
151 300, /* OFF-ON-ON = 5 Min */
152 600, /* ON-OFF-OFF = 10 Min */
153 1800, /* ON-OFF-ON = 30 Min */
154 3600, /* ON-ON-OFF = 1 Hour */
155 7200, /* ON-ON-ON = 2 hour */
159 * We are using an kernel timer to do the pinging of the watchdog
160 * every ~500ms. We try to set the internal heartbeat of the
164 #define WDT_INTERVAL (HZ/2+1)
166 /* We can only use 1 card due to the /dev/watchdog restriction */
167 static int cards_found
;
169 /* internal variables */
170 static unsigned long open_allowed
;
171 static char expect_close
;
172 static int temp_panic
;
174 /* this is private data for each ISA-PC watchdog card */
176 char fw_ver_str
[6]; /* The cards firmware version */
177 int revision
; /* The card's revision */
178 int supports_temp
; /* Whether or not the card has
179 a temperature device */
180 int command_mode
; /* Whether or not the card is in
182 int boot_status
; /* The card's boot status */
183 int io_addr
; /* The cards I/O address */
184 spinlock_t io_lock
; /* the lock for io operations */
185 struct timer_list timer
; /* The timer that pings the watchdog */
186 unsigned long next_heartbeat
; /* the next_heartbeat for the timer */
189 /* module parameters */
190 #define QUIET 0 /* Default */
191 #define VERBOSE 1 /* Verbose */
192 #define DEBUG 2 /* print fancy stuff too */
193 static int debug
= QUIET
;
194 module_param(debug
, int, 0);
195 MODULE_PARM_DESC(debug
,
196 "Debug level: 0=Quiet, 1=Verbose, 2=Debug (default=0)");
198 /* default heartbeat = delay-time from dip-switches */
199 #define WATCHDOG_HEARTBEAT 0
200 static int heartbeat
= WATCHDOG_HEARTBEAT
;
201 module_param(heartbeat
, int, 0);
202 MODULE_PARM_DESC(heartbeat
, "Watchdog heartbeat in seconds. "
203 "(2 <= heartbeat <= 7200 or 0=delay-time from dip-switches, default="
204 __MODULE_STRING(WATCHDOG_HEARTBEAT
) ")");
206 static int nowayout
= WATCHDOG_NOWAYOUT
;
207 module_param(nowayout
, int, 0);
208 MODULE_PARM_DESC(nowayout
,
209 "Watchdog cannot be stopped once started (default="
210 __MODULE_STRING(WATCHDOG_NOWAYOUT
) ")");
216 static int send_isa_command(int cmd
)
220 int port0
, last_port0
; /* Double read for stabilising */
223 printk(KERN_DEBUG PFX
"sending following data cmd=0x%02x\n",
226 /* The WCMD bit must be 1 and the command is only 4 bits in size */
227 control_status
= (cmd
& 0x0F) | WD_WCMD
;
228 outb_p(control_status
, pcwd_private
.io_addr
+ 2);
229 udelay(ISA_COMMAND_TIMEOUT
);
231 port0
= inb_p(pcwd_private
.io_addr
);
232 for (i
= 0; i
< 25; ++i
) {
234 port0
= inb_p(pcwd_private
.io_addr
);
236 if (port0
== last_port0
)
237 break; /* Data is stable */
243 printk(KERN_DEBUG PFX
"received following data for "
244 "cmd=0x%02x: port0=0x%02x last_port0=0x%02x\n",
245 cmd
, port0
, last_port0
);
250 static int set_command_mode(void)
252 int i
, found
= 0, count
= 0;
254 /* Set the card into command mode */
255 spin_lock(&pcwd_private
.io_lock
);
256 while ((!found
) && (count
< 3)) {
257 i
= send_isa_command(CMD_ISA_IDLE
);
261 else if (i
== 0xF3) {
262 /* Card does not like what we've done to it */
263 outb_p(0x00, pcwd_private
.io_addr
+ 2);
264 udelay(1200); /* Spec says wait 1ms */
265 outb_p(0x00, pcwd_private
.io_addr
+ 2);
266 udelay(ISA_COMMAND_TIMEOUT
);
270 spin_unlock(&pcwd_private
.io_lock
);
271 pcwd_private
.command_mode
= found
;
274 printk(KERN_DEBUG PFX
"command_mode=%d\n",
275 pcwd_private
.command_mode
);
280 static void unset_command_mode(void)
282 /* Set the card into normal mode */
283 spin_lock(&pcwd_private
.io_lock
);
284 outb_p(0x00, pcwd_private
.io_addr
+ 2);
285 udelay(ISA_COMMAND_TIMEOUT
);
286 spin_unlock(&pcwd_private
.io_lock
);
288 pcwd_private
.command_mode
= 0;
291 printk(KERN_DEBUG PFX
"command_mode=%d\n",
292 pcwd_private
.command_mode
);
295 static inline void pcwd_check_temperature_support(void)
297 if (inb(pcwd_private
.io_addr
) != 0xF0)
298 pcwd_private
.supports_temp
= 1;
301 static inline void pcwd_get_firmware(void)
303 int one
, ten
, hund
, minor
;
305 strcpy(pcwd_private
.fw_ver_str
, "ERROR");
307 if (set_command_mode()) {
308 one
= send_isa_command(CMD_ISA_VERSION_INTEGER
);
309 ten
= send_isa_command(CMD_ISA_VERSION_TENTH
);
310 hund
= send_isa_command(CMD_ISA_VERSION_HUNDRETH
);
311 minor
= send_isa_command(CMD_ISA_VERSION_MINOR
);
312 sprintf(pcwd_private
.fw_ver_str
, "%c.%c%c%c",
313 one
, ten
, hund
, minor
);
315 unset_command_mode();
320 static inline int pcwd_get_option_switches(void)
322 int option_switches
= 0;
324 if (set_command_mode()) {
325 /* Get switch settings */
326 option_switches
= send_isa_command(CMD_ISA_SWITCH_SETTINGS
);
329 unset_command_mode();
330 return option_switches
;
333 static void pcwd_show_card_info(void)
337 /* Get some extra info from the hardware (in command/debug/diag mode) */
338 if (pcwd_private
.revision
== PCWD_REVISION_A
)
340 "ISA-PC Watchdog (REV.A) detected at port 0x%04x\n",
341 pcwd_private
.io_addr
);
342 else if (pcwd_private
.revision
== PCWD_REVISION_C
) {
344 printk(KERN_INFO PFX
"ISA-PC Watchdog (REV.C) detected at port "
345 "0x%04x (Firmware version: %s)\n",
346 pcwd_private
.io_addr
, pcwd_private
.fw_ver_str
);
347 option_switches
= pcwd_get_option_switches();
348 printk(KERN_INFO PFX
"Option switches (0x%02x): "
349 "Temperature Reset Enable=%s, Power On Delay=%s\n",
351 ((option_switches
& 0x10) ? "ON" : "OFF"),
352 ((option_switches
& 0x08) ? "ON" : "OFF"));
354 /* Reprogram internal heartbeat to 2 seconds */
355 if (set_command_mode()) {
356 send_isa_command(CMD_ISA_DELAY_TIME_2SECS
);
357 unset_command_mode();
361 if (pcwd_private
.supports_temp
)
362 printk(KERN_INFO PFX
"Temperature Option Detected\n");
364 if (pcwd_private
.boot_status
& WDIOF_CARDRESET
)
366 "Previous reboot was caused by the card\n");
368 if (pcwd_private
.boot_status
& WDIOF_OVERHEAT
) {
369 printk(KERN_EMERG PFX
370 "Card senses a CPU Overheat. Panicking!\n");
371 printk(KERN_EMERG PFX
375 if (pcwd_private
.boot_status
== 0)
377 "No previous trip detected - Cold boot or reset\n");
380 static void pcwd_timer_ping(unsigned long data
)
384 /* If we got a heartbeat pulse within the WDT_INTERVAL
385 * we agree to ping the WDT */
386 if (time_before(jiffies
, pcwd_private
.next_heartbeat
)) {
387 /* Ping the watchdog */
388 spin_lock(&pcwd_private
.io_lock
);
389 if (pcwd_private
.revision
== PCWD_REVISION_A
) {
390 /* Rev A cards are reset by setting the
391 WD_WDRST bit in register 1 */
392 wdrst_stat
= inb_p(pcwd_private
.io_addr
);
394 wdrst_stat
|= WD_WDRST
;
396 outb_p(wdrst_stat
, pcwd_private
.io_addr
+ 1);
398 /* Re-trigger watchdog by writing to port 0 */
399 outb_p(0x00, pcwd_private
.io_addr
);
402 /* Re-set the timer interval */
403 mod_timer(&pcwd_private
.timer
, jiffies
+ WDT_INTERVAL
);
405 spin_unlock(&pcwd_private
.io_lock
);
407 printk(KERN_WARNING PFX
408 "Heartbeat lost! Will not ping the watchdog\n");
412 static int pcwd_start(void)
416 pcwd_private
.next_heartbeat
= jiffies
+ (heartbeat
* HZ
);
418 /* Start the timer */
419 mod_timer(&pcwd_private
.timer
, jiffies
+ WDT_INTERVAL
);
421 /* Enable the port */
422 if (pcwd_private
.revision
== PCWD_REVISION_C
) {
423 spin_lock(&pcwd_private
.io_lock
);
424 outb_p(0x00, pcwd_private
.io_addr
+ 3);
425 udelay(ISA_COMMAND_TIMEOUT
);
426 stat_reg
= inb_p(pcwd_private
.io_addr
+ 2);
427 spin_unlock(&pcwd_private
.io_lock
);
428 if (stat_reg
& WD_WDIS
) {
429 printk(KERN_INFO PFX
"Could not start watchdog\n");
434 if (debug
>= VERBOSE
)
435 printk(KERN_DEBUG PFX
"Watchdog started\n");
440 static int pcwd_stop(void)
445 del_timer(&pcwd_private
.timer
);
447 /* Disable the board */
448 if (pcwd_private
.revision
== PCWD_REVISION_C
) {
449 spin_lock(&pcwd_private
.io_lock
);
450 outb_p(0xA5, pcwd_private
.io_addr
+ 3);
451 udelay(ISA_COMMAND_TIMEOUT
);
452 outb_p(0xA5, pcwd_private
.io_addr
+ 3);
453 udelay(ISA_COMMAND_TIMEOUT
);
454 stat_reg
= inb_p(pcwd_private
.io_addr
+ 2);
455 spin_unlock(&pcwd_private
.io_lock
);
456 if ((stat_reg
& WD_WDIS
) == 0) {
457 printk(KERN_INFO PFX
"Could not stop watchdog\n");
462 if (debug
>= VERBOSE
)
463 printk(KERN_DEBUG PFX
"Watchdog stopped\n");
468 static int pcwd_keepalive(void)
471 pcwd_private
.next_heartbeat
= jiffies
+ (heartbeat
* HZ
);
474 printk(KERN_DEBUG PFX
"Watchdog keepalive signal send\n");
479 static int pcwd_set_heartbeat(int t
)
481 if (t
< 2 || t
> 7200) /* arbitrary upper limit */
486 if (debug
>= VERBOSE
)
487 printk(KERN_DEBUG PFX
"New heartbeat: %d\n",
493 static int pcwd_get_status(int *status
)
498 spin_lock(&pcwd_private
.io_lock
);
499 if (pcwd_private
.revision
== PCWD_REVISION_A
)
500 /* Rev A cards return status information from
501 * the base register, which is used for the
502 * temperature in other cards. */
503 control_status
= inb(pcwd_private
.io_addr
);
505 /* Rev C cards return card status in the base
506 * address + 1 register. And use different bits
507 * to indicate a card initiated reset, and an
508 * over-temperature condition. And the reboot
509 * status can be reset. */
510 control_status
= inb(pcwd_private
.io_addr
+ 1);
512 spin_unlock(&pcwd_private
.io_lock
);
514 if (pcwd_private
.revision
== PCWD_REVISION_A
) {
515 if (control_status
& WD_WDRST
)
516 *status
|= WDIOF_CARDRESET
;
518 if (control_status
& WD_T110
) {
519 *status
|= WDIOF_OVERHEAT
;
522 "Temperature overheat trip!\n");
527 if (control_status
& WD_REVC_WTRP
)
528 *status
|= WDIOF_CARDRESET
;
530 if (control_status
& WD_REVC_TTRP
) {
531 *status
|= WDIOF_OVERHEAT
;
534 "Temperature overheat trip!\n");
543 static int pcwd_clear_status(void)
547 if (pcwd_private
.revision
== PCWD_REVISION_C
) {
548 spin_lock(&pcwd_private
.io_lock
);
550 if (debug
>= VERBOSE
)
552 "clearing watchdog trip status\n");
554 control_status
= inb_p(pcwd_private
.io_addr
+ 1);
556 if (debug
>= DEBUG
) {
557 printk(KERN_DEBUG PFX
"status was: 0x%02x\n",
559 printk(KERN_DEBUG PFX
"sending: 0x%02x\n",
560 (control_status
& WD_REVC_R2DS
));
563 /* clear reset status & Keep Relay 2 disable state as it is */
564 outb_p((control_status
& WD_REVC_R2DS
),
565 pcwd_private
.io_addr
+ 1);
567 spin_unlock(&pcwd_private
.io_lock
);
572 static int pcwd_get_temperature(int *temperature
)
574 /* check that port 0 gives temperature info and no command results */
575 if (pcwd_private
.command_mode
)
579 if (!pcwd_private
.supports_temp
)
583 * Convert celsius to fahrenheit, since this was
584 * the decided 'standard' for this return value.
586 spin_lock(&pcwd_private
.io_lock
);
587 *temperature
= ((inb(pcwd_private
.io_addr
)) * 9 / 5) + 32;
588 spin_unlock(&pcwd_private
.io_lock
);
590 if (debug
>= DEBUG
) {
591 printk(KERN_DEBUG PFX
"temperature is: %d F\n",
599 * /dev/watchdog handling
602 static long pcwd_ioctl(struct file
*file
, unsigned int cmd
, unsigned long arg
)
608 int __user
*argp
= (int __user
*)arg
;
609 static struct watchdog_info ident
= {
610 .options
= WDIOF_OVERHEAT
|
612 WDIOF_KEEPALIVEPING
|
615 .firmware_version
= 1,
620 case WDIOC_GETSUPPORT
:
621 if (copy_to_user(argp
, &ident
, sizeof(ident
)))
625 case WDIOC_GETSTATUS
:
626 pcwd_get_status(&status
);
627 return put_user(status
, argp
);
629 case WDIOC_GETBOOTSTATUS
:
630 return put_user(pcwd_private
.boot_status
, argp
);
633 if (pcwd_get_temperature(&temperature
))
636 return put_user(temperature
, argp
);
638 case WDIOC_SETOPTIONS
:
639 if (pcwd_private
.revision
== PCWD_REVISION_C
) {
640 if (get_user(rv
, argp
))
643 if (rv
& WDIOS_DISABLECARD
) {
644 status
= pcwd_stop();
648 if (rv
& WDIOS_ENABLECARD
) {
649 status
= pcwd_start();
653 if (rv
& WDIOS_TEMPPANIC
)
658 case WDIOC_KEEPALIVE
:
662 case WDIOC_SETTIMEOUT
:
663 if (get_user(new_heartbeat
, argp
))
666 if (pcwd_set_heartbeat(new_heartbeat
))
672 case WDIOC_GETTIMEOUT
:
673 return put_user(heartbeat
, argp
);
682 static ssize_t
pcwd_write(struct file
*file
, const char __user
*buf
, size_t len
,
689 /* In case it was set long ago */
692 for (i
= 0; i
!= len
; i
++) {
695 if (get_user(c
, buf
+ i
))
706 static int pcwd_open(struct inode
*inode
, struct file
*file
)
708 if (test_and_set_bit(0, &open_allowed
))
711 __module_get(THIS_MODULE
);
715 return nonseekable_open(inode
, file
);
718 static int pcwd_close(struct inode
*inode
, struct file
*file
)
720 if (expect_close
== 42)
724 "Unexpected close, not stopping watchdog!\n");
728 clear_bit(0, &open_allowed
);
733 * /dev/temperature handling
736 static ssize_t
pcwd_temp_read(struct file
*file
, char __user
*buf
, size_t count
,
741 if (pcwd_get_temperature(&temperature
))
744 if (copy_to_user(buf
, &temperature
, 1))
750 static int pcwd_temp_open(struct inode
*inode
, struct file
*file
)
752 if (!pcwd_private
.supports_temp
)
755 return nonseekable_open(inode
, file
);
758 static int pcwd_temp_close(struct inode
*inode
, struct file
*file
)
767 static const struct file_operations pcwd_fops
= {
768 .owner
= THIS_MODULE
,
771 .unlocked_ioctl
= pcwd_ioctl
,
773 .release
= pcwd_close
,
776 static struct miscdevice pcwd_miscdev
= {
777 .minor
= WATCHDOG_MINOR
,
782 static const struct file_operations pcwd_temp_fops
= {
783 .owner
= THIS_MODULE
,
785 .read
= pcwd_temp_read
,
786 .open
= pcwd_temp_open
,
787 .release
= pcwd_temp_close
,
790 static struct miscdevice temp_miscdev
= {
792 .name
= "temperature",
793 .fops
= &pcwd_temp_fops
,
797 * Init & exit routines
800 static inline int get_revision(void)
802 int r
= PCWD_REVISION_C
;
804 spin_lock(&pcwd_private
.io_lock
);
805 /* REV A cards use only 2 io ports; test
806 * presumes a floating bus reads as 0xff. */
807 if ((inb(pcwd_private
.io_addr
+ 2) == 0xFF) ||
808 (inb(pcwd_private
.io_addr
+ 3) == 0xFF))
810 spin_unlock(&pcwd_private
.io_lock
);
816 * The ISA cards have a heartbeat bit in one of the registers, which
817 * register is card dependent. The heartbeat bit is monitored, and if
818 * found, is considered proof that a Berkshire card has been found.
819 * The initial rate is once per second at board start up, then twice
820 * per second for normal operation.
822 static int __devinit
pcwd_isa_match(struct device
*dev
, unsigned int id
)
824 int base_addr
= pcwd_ioports
[id
];
825 int port0
, last_port0
; /* Reg 0, in case it's REV A */
826 int port1
, last_port1
; /* Register 1 for REV C cards */
831 printk(KERN_DEBUG PFX
"pcwd_isa_match id=%d\n",
834 if (!request_region(base_addr
, 4, "PCWD")) {
835 printk(KERN_INFO PFX
"Port 0x%04x unavailable\n", base_addr
);
841 port0
= inb_p(base_addr
); /* For REV A boards */
842 port1
= inb_p(base_addr
+ 1); /* For REV C boards */
843 if (port0
!= 0xff || port1
!= 0xff) {
844 /* Not an 'ff' from a floating bus, so must be a card! */
845 for (i
= 0; i
< 4; ++i
) {
852 port0
= inb_p(base_addr
);
853 port1
= inb_p(base_addr
+ 1);
855 /* Has either hearbeat bit changed? */
856 if ((port0
^ last_port0
) & WD_HRTBT
||
857 (port1
^ last_port1
) & WD_REVC_HRBT
) {
863 release_region(base_addr
, 4);
868 static int __devinit
pcwd_isa_probe(struct device
*dev
, unsigned int id
)
873 printk(KERN_DEBUG PFX
"pcwd_isa_probe id=%d\n",
877 if (cards_found
== 1)
878 printk(KERN_INFO PFX
"v%s Ken Hollis (kenji@bitgate.com)\n",
881 if (cards_found
> 1) {
882 printk(KERN_ERR PFX
"This driver only supports 1 device\n");
886 if (pcwd_ioports
[id
] == 0x0000) {
887 printk(KERN_ERR PFX
"No I/O-Address for card detected\n");
890 pcwd_private
.io_addr
= pcwd_ioports
[id
];
892 spin_lock_init(&pcwd_private
.io_lock
);
894 /* Check card's revision */
895 pcwd_private
.revision
= get_revision();
897 if (!request_region(pcwd_private
.io_addr
,
898 (pcwd_private
.revision
== PCWD_REVISION_A
) ? 2 : 4, "PCWD")) {
899 printk(KERN_ERR PFX
"I/O address 0x%04x already in use\n",
900 pcwd_private
.io_addr
);
902 goto error_request_region
;
905 /* Initial variables */
906 pcwd_private
.supports_temp
= 0;
908 pcwd_private
.boot_status
= 0x0000;
910 /* get the boot_status */
911 pcwd_get_status(&pcwd_private
.boot_status
);
913 /* clear the "card caused reboot" flag */
916 setup_timer(&pcwd_private
.timer
, pcwd_timer_ping
, 0);
918 /* Disable the board */
921 /* Check whether or not the card supports the temperature device */
922 pcwd_check_temperature_support();
924 /* Show info about the card itself */
925 pcwd_show_card_info();
927 /* If heartbeat = 0 then we use the heartbeat from the dip-switches */
929 heartbeat
= heartbeat_tbl
[(pcwd_get_option_switches() & 0x07)];
931 /* Check that the heartbeat value is within it's range;
932 if not reset to the default */
933 if (pcwd_set_heartbeat(heartbeat
)) {
934 pcwd_set_heartbeat(WATCHDOG_HEARTBEAT
);
936 "heartbeat value must be 2 <= heartbeat <= 7200, using %d\n",
940 if (pcwd_private
.supports_temp
) {
941 ret
= misc_register(&temp_miscdev
);
944 "cannot register miscdev on minor=%d (err=%d)\n",
946 goto error_misc_register_temp
;
950 ret
= misc_register(&pcwd_miscdev
);
953 "cannot register miscdev on minor=%d (err=%d)\n",
954 WATCHDOG_MINOR
, ret
);
955 goto error_misc_register_watchdog
;
958 printk(KERN_INFO PFX
"initialized. heartbeat=%d sec (nowayout=%d)\n",
959 heartbeat
, nowayout
);
963 error_misc_register_watchdog
:
964 if (pcwd_private
.supports_temp
)
965 misc_deregister(&temp_miscdev
);
966 error_misc_register_temp
:
967 release_region(pcwd_private
.io_addr
,
968 (pcwd_private
.revision
== PCWD_REVISION_A
) ? 2 : 4);
969 error_request_region
:
970 pcwd_private
.io_addr
= 0x0000;
975 static int __devexit
pcwd_isa_remove(struct device
*dev
, unsigned int id
)
978 printk(KERN_DEBUG PFX
"pcwd_isa_remove id=%d\n",
981 if (!pcwd_private
.io_addr
)
984 /* Disable the board */
989 misc_deregister(&pcwd_miscdev
);
990 if (pcwd_private
.supports_temp
)
991 misc_deregister(&temp_miscdev
);
992 release_region(pcwd_private
.io_addr
,
993 (pcwd_private
.revision
== PCWD_REVISION_A
) ? 2 : 4);
994 pcwd_private
.io_addr
= 0x0000;
1000 static void pcwd_isa_shutdown(struct device
*dev
, unsigned int id
)
1003 printk(KERN_DEBUG PFX
"pcwd_isa_shutdown id=%d\n",
1009 static struct isa_driver pcwd_isa_driver
= {
1010 .match
= pcwd_isa_match
,
1011 .probe
= pcwd_isa_probe
,
1012 .remove
= __devexit_p(pcwd_isa_remove
),
1013 .shutdown
= pcwd_isa_shutdown
,
1015 .owner
= THIS_MODULE
,
1016 .name
= WATCHDOG_NAME
,
1020 static int __init
pcwd_init_module(void)
1022 return isa_register_driver(&pcwd_isa_driver
, PCWD_ISA_NR_CARDS
);
1025 static void __exit
pcwd_cleanup_module(void)
1027 isa_unregister_driver(&pcwd_isa_driver
);
1028 printk(KERN_INFO PFX
"Watchdog Module Unloaded.\n");
1031 module_init(pcwd_init_module
);
1032 module_exit(pcwd_cleanup_module
);
1034 MODULE_AUTHOR("Ken Hollis <kenji@bitgate.com>, "
1035 "Wim Van Sebroeck <wim@iguana.be>");
1036 MODULE_DESCRIPTION("Berkshire ISA-PC Watchdog driver");
1037 MODULE_VERSION(WATCHDOG_VERSION
);
1038 MODULE_LICENSE("GPL");
1039 MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR
);
1040 MODULE_ALIAS_MISCDEV(TEMP_MINOR
);