?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
module: merge module_alloc() finally
[linux-2.6/linux-2.6-openrd.git] / drivers / spi / spi_s3c24xx.c
blobb3ebc1d0f85fc8ac93c4935eb793f8193d9e7682
1 /* linux/drivers/spi/spi_s3c24xx.c
2 *
3 * Copyright (c) 2006 Ben Dooks
4 * Copyright (c) 2006 Simtec Electronics
5 * Ben Dooks <ben@simtec.co.uk>
6 *
7 * This program is free software; you can redistribute it and/or modify
8 * it under the terms of the GNU General Public License version 2 as
9 * published by the Free Software Foundation.
10 *
11 */
12
13 #include <linux/init.h>
14 #include <linux/spinlock.h>
15 #include <linux/workqueue.h>
16 #include <linux/interrupt.h>
17 #include <linux/delay.h>
18 #include <linux/errno.h>
19 #include <linux/err.h>
20 #include <linux/clk.h>
21 #include <linux/platform_device.h>
22 #include <linux/gpio.h>
23
24 #include <linux/spi/spi.h>
25 #include <linux/spi/spi_bitbang.h>
26
27 #include <asm/io.h>
28 #include <asm/dma.h>
29 #include <mach/hardware.h>
30
31 #include <plat/regs-spi.h>
32 #include <mach/spi.h>
33
34 struct s3c24xx_spi {
35 /* bitbang has to be first */
36 struct spi_bitbang bitbang;
37 struct completion done;
38
39 void __iomem *regs;
40 int irq;
41 int len;
42 int count;
43
44 void (*set_cs)(struct s3c2410_spi_info *spi,
45 int cs, int pol);
46
47 /* data buffers */
48 const unsigned char *tx;
49 unsigned char *rx;
50
51 struct clk *clk;
52 struct resource *ioarea;
53 struct spi_master *master;
54 struct spi_device *curdev;
55 struct device *dev;
56 struct s3c2410_spi_info *pdata;
57 };
58
59 #define SPCON_DEFAULT (S3C2410_SPCON_MSTR | S3C2410_SPCON_SMOD_INT)
60 #define SPPIN_DEFAULT (S3C2410_SPPIN_KEEP)
61
62 static inline struct s3c24xx_spi *to_hw(struct spi_device *sdev)
63 {
64 return spi_master_get_devdata(sdev->master);
65 }
66
67 static void s3c24xx_spi_gpiocs(struct s3c2410_spi_info *spi, int cs, int pol)
68 {
69 gpio_set_value(spi->pin_cs, pol);
70 }
71
72 static void s3c24xx_spi_chipsel(struct spi_device *spi, int value)
73 {
74 struct s3c24xx_spi *hw = to_hw(spi);
75 unsigned int cspol = spi->mode & SPI_CS_HIGH ? 1 : 0;
76 unsigned int spcon;
77
78 switch (value) {
79 case BITBANG_CS_INACTIVE:
80 hw->set_cs(hw->pdata, spi->chip_select, cspol^1);
81 break;
82
83 case BITBANG_CS_ACTIVE:
84 spcon = readb(hw->regs + S3C2410_SPCON);
85
86 if (spi->mode & SPI_CPHA)
87 spcon |= S3C2410_SPCON_CPHA_FMTB;
88 else
89 spcon &= ~S3C2410_SPCON_CPHA_FMTB;
90
91 if (spi->mode & SPI_CPOL)
92 spcon |= S3C2410_SPCON_CPOL_HIGH;
93 else
94 spcon &= ~S3C2410_SPCON_CPOL_HIGH;
95
96 spcon |= S3C2410_SPCON_ENSCK;
97
98 /* write new configration */
99
100 writeb(spcon, hw->regs + S3C2410_SPCON);
101 hw->set_cs(hw->pdata, spi->chip_select, cspol);
102
103 break;
104 }
105 }
106
107 static int s3c24xx_spi_setupxfer(struct spi_device *spi,
108 struct spi_transfer *t)
109 {
110 struct s3c24xx_spi *hw = to_hw(spi);
111 unsigned int bpw;
112 unsigned int hz;
113 unsigned int div;
114
115 bpw = t ? t->bits_per_word : spi->bits_per_word;
116 hz = t ? t->speed_hz : spi->max_speed_hz;
117
118 if (bpw != 8) {
119 dev_err(&spi->dev, "invalid bits-per-word (%d)\n", bpw);
120 return -EINVAL;
121 }
122
123 div = clk_get_rate(hw->clk) / hz;
124
125 /* is clk = pclk / (2 * (pre+1)), or is it
126 * clk = (pclk * 2) / ( pre + 1) */
127
128 div /= 2;
129
130 if (div > 0)
131 div -= 1;
132
133 if (div > 255)
134 div = 255;
135
136 dev_dbg(&spi->dev, "setting pre-scaler to %d (hz %d)\n", div, hz);
137 writeb(div, hw->regs + S3C2410_SPPRE);
138
139 spin_lock(&hw->bitbang.lock);
140 if (!hw->bitbang.busy) {
141 hw->bitbang.chipselect(spi, BITBANG_CS_INACTIVE);
142 /* need to ndelay for 0.5 clocktick ? */
143 }
144 spin_unlock(&hw->bitbang.lock);
145
146 return 0;
147 }
148
149 /* the spi->mode bits understood by this driver: */
150 #define MODEBITS (SPI_CPOL | SPI_CPHA | SPI_CS_HIGH)
151
152 static int s3c24xx_spi_setup(struct spi_device *spi)
153 {
154 int ret;
155
156 if (!spi->bits_per_word)
157 spi->bits_per_word = 8;
158
159 if (spi->mode & ~MODEBITS) {
160 dev_dbg(&spi->dev, "setup: unsupported mode bits %x\n",
161 spi->mode & ~MODEBITS);
162 return -EINVAL;
163 }
164
165 ret = s3c24xx_spi_setupxfer(spi, NULL);
166 if (ret < 0) {
167 dev_err(&spi->dev, "setupxfer returned %d\n", ret);
168 return ret;
169 }
170
171 dev_dbg(&spi->dev, "%s: mode %d, %u bpw, %d hz\n",
172 __func__, spi->mode, spi->bits_per_word,
173 spi->max_speed_hz);
174
175 return 0;
176 }
177
178 static inline unsigned int hw_txbyte(struct s3c24xx_spi *hw, int count)
179 {
180 return hw->tx ? hw->tx[count] : 0;
181 }
182
183 static int s3c24xx_spi_txrx(struct spi_device *spi, struct spi_transfer *t)
184 {
185 struct s3c24xx_spi *hw = to_hw(spi);
186
187 dev_dbg(&spi->dev, "txrx: tx %p, rx %p, len %d\n",
188 t->tx_buf, t->rx_buf, t->len);
189
190 hw->tx = t->tx_buf;
191 hw->rx = t->rx_buf;
192 hw->len = t->len;
193 hw->count = 0;
194
195 init_completion(&hw->done);
196
197 /* send the first byte */
198 writeb(hw_txbyte(hw, 0), hw->regs + S3C2410_SPTDAT);
199
200 wait_for_completion(&hw->done);
201
202 return hw->count;
203 }
204
205 static irqreturn_t s3c24xx_spi_irq(int irq, void *dev)
206 {
207 struct s3c24xx_spi *hw = dev;
208 unsigned int spsta = readb(hw->regs + S3C2410_SPSTA);
209 unsigned int count = hw->count;
210
211 if (spsta & S3C2410_SPSTA_DCOL) {
212 dev_dbg(hw->dev, "data-collision\n");
213 complete(&hw->done);
214 goto irq_done;
215 }
216
217 if (!(spsta & S3C2410_SPSTA_READY)) {
218 dev_dbg(hw->dev, "spi not ready for tx?\n");
219 complete(&hw->done);
220 goto irq_done;
221 }
222
223 hw->count++;
224
225 if (hw->rx)
226 hw->rx[count] = readb(hw->regs + S3C2410_SPRDAT);
227
228 count++;
229
230 if (count < hw->len)
231 writeb(hw_txbyte(hw, count), hw->regs + S3C2410_SPTDAT);
232 else
233 complete(&hw->done);
234
235 irq_done:
236 return IRQ_HANDLED;
237 }
238
239 static void s3c24xx_spi_initialsetup(struct s3c24xx_spi *hw)
240 {
241 /* for the moment, permanently enable the clock */
242
243 clk_enable(hw->clk);
244
245 /* program defaults into the registers */
246
247 writeb(0xff, hw->regs + S3C2410_SPPRE);
248 writeb(SPPIN_DEFAULT, hw->regs + S3C2410_SPPIN);
249 writeb(SPCON_DEFAULT, hw->regs + S3C2410_SPCON);
250
251 if (hw->pdata) {
252 if (hw->set_cs == s3c24xx_spi_gpiocs)
253 gpio_direction_output(hw->pdata->pin_cs, 1);
254
255 if (hw->pdata->gpio_setup)
256 hw->pdata->gpio_setup(hw->pdata, 1);
257 }
258 }
259
260 static int __init s3c24xx_spi_probe(struct platform_device *pdev)
261 {
262 struct s3c2410_spi_info *pdata;
263 struct s3c24xx_spi *hw;
264 struct spi_master *master;
265 struct resource *res;
266 int err = 0;
267
268 master = spi_alloc_master(&pdev->dev, sizeof(struct s3c24xx_spi));
269 if (master == NULL) {
270 dev_err(&pdev->dev, "No memory for spi_master\n");
271 err = -ENOMEM;
272 goto err_nomem;
273 }
274
275 hw = spi_master_get_devdata(master);
276 memset(hw, 0, sizeof(struct s3c24xx_spi));
277
278 hw->master = spi_master_get(master);
279 hw->pdata = pdata = pdev->dev.platform_data;
280 hw->dev = &pdev->dev;
281
282 if (pdata == NULL) {
283 dev_err(&pdev->dev, "No platform data supplied\n");
284 err = -ENOENT;
285 goto err_no_pdata;
286 }
287
288 platform_set_drvdata(pdev, hw);
289 init_completion(&hw->done);
290
291 /* setup the master state. */
292
293 master->num_chipselect = hw->pdata->num_cs;
294 master->bus_num = pdata->bus_num;
295
296 /* setup the state for the bitbang driver */
297
298 hw->bitbang.master = hw->master;
299 hw->bitbang.setup_transfer = s3c24xx_spi_setupxfer;
300 hw->bitbang.chipselect = s3c24xx_spi_chipsel;
301 hw->bitbang.txrx_bufs = s3c24xx_spi_txrx;
302 hw->bitbang.master->setup = s3c24xx_spi_setup;
303
304 dev_dbg(hw->dev, "bitbang at %p\n", &hw->bitbang);
305
306 /* find and map our resources */
307
308 res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
309 if (res == NULL) {
310 dev_err(&pdev->dev, "Cannot get IORESOURCE_MEM\n");
311 err = -ENOENT;
312 goto err_no_iores;
313 }
314
315 hw->ioarea = request_mem_region(res->start, (res->end - res->start)+1,
316 pdev->name);
317
318 if (hw->ioarea == NULL) {
319 dev_err(&pdev->dev, "Cannot reserve region\n");
320 err = -ENXIO;
321 goto err_no_iores;
322 }
323
324 hw->regs = ioremap(res->start, (res->end - res->start)+1);
325 if (hw->regs == NULL) {
326 dev_err(&pdev->dev, "Cannot map IO\n");
327 err = -ENXIO;
328 goto err_no_iomap;
329 }
330
331 hw->irq = platform_get_irq(pdev, 0);
332 if (hw->irq < 0) {
333 dev_err(&pdev->dev, "No IRQ specified\n");
334 err = -ENOENT;
335 goto err_no_irq;
336 }
337
338 err = request_irq(hw->irq, s3c24xx_spi_irq, 0, pdev->name, hw);
339 if (err) {
340 dev_err(&pdev->dev, "Cannot claim IRQ\n");
341 goto err_no_irq;
342 }
343
344 hw->clk = clk_get(&pdev->dev, "spi");
345 if (IS_ERR(hw->clk)) {
346 dev_err(&pdev->dev, "No clock for device\n");
347 err = PTR_ERR(hw->clk);
348 goto err_no_clk;
349 }
350
351 /* setup any gpio we can */
352
353 if (!pdata->set_cs) {
354 if (pdata->pin_cs < 0) {
355 dev_err(&pdev->dev, "No chipselect pin\n");
356 goto err_register;
357 }
358
359 err = gpio_request(pdata->pin_cs, dev_name(&pdev->dev));
360 if (err) {
361 dev_err(&pdev->dev, "Failed to get gpio for cs\n");
362 goto err_register;
363 }
364
365 hw->set_cs = s3c24xx_spi_gpiocs;
366 gpio_direction_output(pdata->pin_cs, 1);
367 } else
368 hw->set_cs = pdata->set_cs;
369
370 s3c24xx_spi_initialsetup(hw);
371
372 /* register our spi controller */
373
374 err = spi_bitbang_start(&hw->bitbang);
375 if (err) {
376 dev_err(&pdev->dev, "Failed to register SPI master\n");
377 goto err_register;
378 }
379
380 return 0;
381
382 err_register:
383 if (hw->set_cs == s3c24xx_spi_gpiocs)
384 gpio_free(pdata->pin_cs);
385
386 clk_disable(hw->clk);
387 clk_put(hw->clk);
388
389 err_no_clk:
390 free_irq(hw->irq, hw);
391
392 err_no_irq:
393 iounmap(hw->regs);
394
395 err_no_iomap:
396 release_resource(hw->ioarea);
397 kfree(hw->ioarea);
398
399 err_no_iores:
400 err_no_pdata:
401 spi_master_put(hw->master);;
402
403 err_nomem:
404 return err;
405 }
406
407 static int __exit s3c24xx_spi_remove(struct platform_device *dev)
408 {
409 struct s3c24xx_spi *hw = platform_get_drvdata(dev);
410
411 platform_set_drvdata(dev, NULL);
412
413 spi_unregister_master(hw->master);
414
415 clk_disable(hw->clk);
416 clk_put(hw->clk);
417
418 free_irq(hw->irq, hw);
419 iounmap(hw->regs);
420
421 if (hw->set_cs == s3c24xx_spi_gpiocs)
422 gpio_free(hw->pdata->pin_cs);
423
424 release_resource(hw->ioarea);
425 kfree(hw->ioarea);
426
427 spi_master_put(hw->master);
428 return 0;
429 }
430
431
432 #ifdef CONFIG_PM
433
434 static int s3c24xx_spi_suspend(struct platform_device *pdev, pm_message_t msg)
435 {
436 struct s3c24xx_spi *hw = platform_get_drvdata(pdev);
437
438 if (hw->pdata && hw->pdata->gpio_setup)
439 hw->pdata->gpio_setup(hw->pdata, 0);
440
441 clk_disable(hw->clk);
442 return 0;
443 }
444
445 static int s3c24xx_spi_resume(struct platform_device *pdev)
446 {
447 struct s3c24xx_spi *hw = platform_get_drvdata(pdev);
448
449 s3c24xx_spi_initialsetup(hw);
450 return 0;
451 }
452
453 #else
454 #define s3c24xx_spi_suspend NULL
455 #define s3c24xx_spi_resume NULL
456 #endif
457
458 MODULE_ALIAS("platform:s3c2410-spi");
459 static struct platform_driver s3c24xx_spi_driver = {
460 .remove = __exit_p(s3c24xx_spi_remove),
461 .suspend = s3c24xx_spi_suspend,
462 .resume = s3c24xx_spi_resume,
463 .driver = {
464 .name = "s3c2410-spi",
465 .owner = THIS_MODULE,
466 },
467 };
468
469 static int __init s3c24xx_spi_init(void)
470 {
471 return platform_driver_probe(&s3c24xx_spi_driver, s3c24xx_spi_probe);
472 }
473
474 static void __exit s3c24xx_spi_exit(void)
475 {
476 platform_driver_unregister(&s3c24xx_spi_driver);
477 }
478
479 module_init(s3c24xx_spi_init);
480 module_exit(s3c24xx_spi_exit);
481
482 MODULE_DESCRIPTION("S3C24XX SPI Driver");
483 MODULE_AUTHOR("Ben Dooks, <ben@simtec.co.uk>");
484 MODULE_LICENSE("GPL");
linux 2.6 git repository for openrd