[PATCH] MM: page allocation hooks for VMI backend

[linux-2.6/linux-2.6-openrd.git] / drivers / ide / arm / icside.c

/*
 * linux/drivers/ide/arm/icside.c
 *
 * Copyright (c) 1996-2004 Russell King.
 *
 * Please note that this platform does not support 32-bit IDE IO.
 */

#include <linux/string.h>
#include <linux/module.h>
#include <linux/ioport.h>
#include <linux/slab.h>
#include <linux/blkdev.h>
#include <linux/errno.h>
#include <linux/hdreg.h>
#include <linux/ide.h>
#include <linux/dma-mapping.h>
#include <linux/device.h>
#include <linux/init.h>
#include <linux/scatterlist.h>

#include <asm/dma.h>
#include <asm/ecard.h>
#include <asm/io.h>

#define ICS_IDENT_OFFSET                0x2280

#define ICS_ARCIN_V5_INTRSTAT           0x0000
#define ICS_ARCIN_V5_INTROFFSET         0x0004
#define ICS_ARCIN_V5_IDEOFFSET          0x2800
#define ICS_ARCIN_V5_IDEALTOFFSET       0x2b80
#define ICS_ARCIN_V5_IDESTEPPING        6

#define ICS_ARCIN_V6_IDEOFFSET_1        0x2000
#define ICS_ARCIN_V6_INTROFFSET_1       0x2200
#define ICS_ARCIN_V6_INTRSTAT_1         0x2290
#define ICS_ARCIN_V6_IDEALTOFFSET_1     0x2380
#define ICS_ARCIN_V6_IDEOFFSET_2        0x3000
#define ICS_ARCIN_V6_INTROFFSET_2       0x3200
#define ICS_ARCIN_V6_INTRSTAT_2         0x3290
#define ICS_ARCIN_V6_IDEALTOFFSET_2     0x3380
#define ICS_ARCIN_V6_IDESTEPPING        6

struct cardinfo {
        unsigned int dataoffset;
        unsigned int ctrloffset;
        unsigned int stepping;
};

static struct cardinfo icside_cardinfo_v5 = {
        .dataoffset     = ICS_ARCIN_V5_IDEOFFSET,
        .ctrloffset     = ICS_ARCIN_V5_IDEALTOFFSET,
        .stepping       = ICS_ARCIN_V5_IDESTEPPING,
};

static struct cardinfo icside_cardinfo_v6_1 = {
        .dataoffset     = ICS_ARCIN_V6_IDEOFFSET_1,
        .ctrloffset     = ICS_ARCIN_V6_IDEALTOFFSET_1,
        .stepping       = ICS_ARCIN_V6_IDESTEPPING,
};

static struct cardinfo icside_cardinfo_v6_2 = {
        .dataoffset     = ICS_ARCIN_V6_IDEOFFSET_2,
        .ctrloffset     = ICS_ARCIN_V6_IDEALTOFFSET_2,
        .stepping       = ICS_ARCIN_V6_IDESTEPPING,
};

struct icside_state {
        unsigned int channel;
        unsigned int enabled;
        void __iomem *irq_port;
        void __iomem *ioc_base;
        unsigned int type;
        /* parent device... until the IDE core gets one of its own */
        struct device *dev;
        ide_hwif_t *hwif[2];
};

#define ICS_TYPE_A3IN   0
#define ICS_TYPE_A3USER 1
#define ICS_TYPE_V6     3
#define ICS_TYPE_V5     15
#define ICS_TYPE_NOTYPE ((unsigned int)-1)

/* ---------------- Version 5 PCB Support Functions --------------------- */
/* Prototype: icside_irqenable_arcin_v5 (struct expansion_card *ec, int irqnr)
 * Purpose  : enable interrupts from card
 */
static void icside_irqenable_arcin_v5 (struct expansion_card *ec, int irqnr)
{
        struct icside_state *state = ec->irq_data;

        writeb(0, state->irq_port + ICS_ARCIN_V5_INTROFFSET);
}

/* Prototype: icside_irqdisable_arcin_v5 (struct expansion_card *ec, int irqnr)
 * Purpose  : disable interrupts from card
 */
static void icside_irqdisable_arcin_v5 (struct expansion_card *ec, int irqnr)
{
        struct icside_state *state = ec->irq_data;

        readb(state->irq_port + ICS_ARCIN_V5_INTROFFSET);
}

static const expansioncard_ops_t icside_ops_arcin_v5 = {
        .irqenable      = icside_irqenable_arcin_v5,
        .irqdisable     = icside_irqdisable_arcin_v5,
};


/* ---------------- Version 6 PCB Support Functions --------------------- */
/* Prototype: icside_irqenable_arcin_v6 (struct expansion_card *ec, int irqnr)
 * Purpose  : enable interrupts from card
 */
static void icside_irqenable_arcin_v6 (struct expansion_card *ec, int irqnr)
{
        struct icside_state *state = ec->irq_data;
        void __iomem *base = state->irq_port;

        state->enabled = 1;

        switch (state->channel) {
        case 0:
                writeb(0, base + ICS_ARCIN_V6_INTROFFSET_1);
                readb(base + ICS_ARCIN_V6_INTROFFSET_2);
                break;
        case 1:
                writeb(0, base + ICS_ARCIN_V6_INTROFFSET_2);
                readb(base + ICS_ARCIN_V6_INTROFFSET_1);
                break;
        }
}

/* Prototype: icside_irqdisable_arcin_v6 (struct expansion_card *ec, int irqnr)
 * Purpose  : disable interrupts from card
 */
static void icside_irqdisable_arcin_v6 (struct expansion_card *ec, int irqnr)
{
        struct icside_state *state = ec->irq_data;

        state->enabled = 0;

        readb(state->irq_port + ICS_ARCIN_V6_INTROFFSET_1);
        readb(state->irq_port + ICS_ARCIN_V6_INTROFFSET_2);
}

/* Prototype: icside_irqprobe(struct expansion_card *ec)
 * Purpose  : detect an active interrupt from card
 */
static int icside_irqpending_arcin_v6(struct expansion_card *ec)
{
        struct icside_state *state = ec->irq_data;

        return readb(state->irq_port + ICS_ARCIN_V6_INTRSTAT_1) & 1 ||
               readb(state->irq_port + ICS_ARCIN_V6_INTRSTAT_2) & 1;
}

static const expansioncard_ops_t icside_ops_arcin_v6 = {
        .irqenable      = icside_irqenable_arcin_v6,
        .irqdisable     = icside_irqdisable_arcin_v6,
        .irqpending     = icside_irqpending_arcin_v6,
};

/*
 * Handle routing of interrupts.  This is called before
 * we write the command to the drive.
 */
static void icside_maskproc(ide_drive_t *drive, int mask)
{
        ide_hwif_t *hwif = HWIF(drive);
        struct icside_state *state = hwif->hwif_data;
        unsigned long flags;

        local_irq_save(flags);

        state->channel = hwif->channel;

        if (state->enabled && !mask) {
                switch (hwif->channel) {
                case 0:
                        writeb(0, state->irq_port + ICS_ARCIN_V6_INTROFFSET_1);
                        readb(state->irq_port + ICS_ARCIN_V6_INTROFFSET_2);
                        break;
                case 1:
                        writeb(0, state->irq_port + ICS_ARCIN_V6_INTROFFSET_2);
                        readb(state->irq_port + ICS_ARCIN_V6_INTROFFSET_1);
                        break;
                }
        } else {
                readb(state->irq_port + ICS_ARCIN_V6_INTROFFSET_2);
                readb(state->irq_port + ICS_ARCIN_V6_INTROFFSET_1);
        }

        local_irq_restore(flags);
}

#ifdef CONFIG_BLK_DEV_IDEDMA_ICS

#ifndef CONFIG_IDEDMA_ICS_AUTO
#warning CONFIG_IDEDMA_ICS_AUTO=n support is obsolete, and will be removed soon.
#endif

/*
 * SG-DMA support.
 *
 * Similar to the BM-DMA, but we use the RiscPCs IOMD DMA controllers.
 * There is only one DMA controller per card, which means that only
 * one drive can be accessed at one time.  NOTE! We do not enforce that
 * here, but we rely on the main IDE driver spotting that both
 * interfaces use the same IRQ, which should guarantee this.
 */

static void icside_build_sglist(ide_drive_t *drive, struct request *rq)
{
        ide_hwif_t *hwif = drive->hwif;
        struct icside_state *state = hwif->hwif_data;
        struct scatterlist *sg = hwif->sg_table;

        ide_map_sg(drive, rq);

        if (rq_data_dir(rq) == READ)
                hwif->sg_dma_direction = DMA_FROM_DEVICE;
        else
                hwif->sg_dma_direction = DMA_TO_DEVICE;

        hwif->sg_nents = dma_map_sg(state->dev, sg, hwif->sg_nents,
                                    hwif->sg_dma_direction);
}

/*
 * Configure the IOMD to give the appropriate timings for the transfer
 * mode being requested.  We take the advice of the ATA standards, and
 * calculate the cycle time based on the transfer mode, and the EIDE
 * MW DMA specs that the drive provides in the IDENTIFY command.
 *
 * We have the following IOMD DMA modes to choose from:
 *
 *      Type    Active          Recovery        Cycle
 *      A       250 (250)       312 (550)       562 (800)
 *      B       187             250             437
 *      C       125 (125)       125 (375)       250 (500)
 *      D       62              125             187
 *
 * (figures in brackets are actual measured timings)
 *
 * However, we also need to take care of the read/write active and
 * recovery timings:
 *
 *                      Read    Write
 *      Mode    Active  -- Recovery --  Cycle   IOMD type
 *      MW0     215     50      215     480     A
 *      MW1     80      50      50      150     C
 *      MW2     70      25      25      120     C
 */
static int icside_set_speed(ide_drive_t *drive, u8 xfer_mode)
{
        int on = 0, cycle_time = 0, use_dma_info = 0;

        /*
         * Limit the transfer speed to MW_DMA_2.
         */
        if (xfer_mode > XFER_MW_DMA_2)
                xfer_mode = XFER_MW_DMA_2;

        switch (xfer_mode) {
        case XFER_MW_DMA_2:
                cycle_time = 250;
                use_dma_info = 1;
                break;

        case XFER_MW_DMA_1:
                cycle_time = 250;
                use_dma_info = 1;
                break;

        case XFER_MW_DMA_0:
                cycle_time = 480;
                break;

        case XFER_SW_DMA_2:
        case XFER_SW_DMA_1:
        case XFER_SW_DMA_0:
                cycle_time = 480;
                break;
        }

        /*
         * If we're going to be doing MW_DMA_1 or MW_DMA_2, we should
         * take care to note the values in the ID...
         */
        if (use_dma_info && drive->id->eide_dma_time > cycle_time)
                cycle_time = drive->id->eide_dma_time;

        drive->drive_data = cycle_time;

        if (cycle_time && ide_config_drive_speed(drive, xfer_mode) == 0)
                on = 1;
        else
                drive->drive_data = 480;

        printk("%s: %s selected (peak %dMB/s)\n", drive->name,
                ide_xfer_verbose(xfer_mode), 2000 / drive->drive_data);

        drive->current_speed = xfer_mode;

        return on;
}

static int icside_dma_host_off(ide_drive_t *drive)
{
        return 0;
}

static int icside_dma_off_quietly(ide_drive_t *drive)
{
        drive->using_dma = 0;
        return icside_dma_host_off(drive);
}

static int icside_dma_host_on(ide_drive_t *drive)
{
        return 0;
}

static int icside_dma_on(ide_drive_t *drive)
{
        drive->using_dma = 1;
        return icside_dma_host_on(drive);
}

static int icside_dma_check(ide_drive_t *drive)
{
        struct hd_driveid *id = drive->id;
        ide_hwif_t *hwif = HWIF(drive);
        int xfer_mode = XFER_PIO_2;
        int on;

        if (!(id->capability & 1) || !hwif->autodma)
                goto out;

        /*
         * Consult the list of known "bad" drives
         */
        if (__ide_dma_bad_drive(drive))
                goto out;

        /*
         * Enable DMA on any drive that has multiword DMA
         */
        if (id->field_valid & 2) {
                xfer_mode = ide_dma_speed(drive, 0);
                goto out;
        }

        /*
         * Consult the list of known "good" drives
         */
        if (__ide_dma_good_drive(drive)) {
                if (id->eide_dma_time > 150)
                        goto out;
                xfer_mode = XFER_MW_DMA_1;
        }

out:
        on = icside_set_speed(drive, xfer_mode);

        if (on)
                return icside_dma_on(drive);
        else
                return icside_dma_off_quietly(drive);
}

static int icside_dma_end(ide_drive_t *drive)
{
        ide_hwif_t *hwif = HWIF(drive);
        struct icside_state *state = hwif->hwif_data;

        drive->waiting_for_dma = 0;

        disable_dma(hwif->hw.dma);

        /* Teardown mappings after DMA has completed. */
        dma_unmap_sg(state->dev, hwif->sg_table, hwif->sg_nents,
                     hwif->sg_dma_direction);

        return get_dma_residue(hwif->hw.dma) != 0;
}

static void icside_dma_start(ide_drive_t *drive)
{
        ide_hwif_t *hwif = HWIF(drive);

        /* We can not enable DMA on both channels simultaneously. */
        BUG_ON(dma_channel_active(hwif->hw.dma));
        enable_dma(hwif->hw.dma);
}

static int icside_dma_setup(ide_drive_t *drive)
{
        ide_hwif_t *hwif = HWIF(drive);
        struct request *rq = hwif->hwgroup->rq;
        unsigned int dma_mode;

        if (rq_data_dir(rq))
                dma_mode = DMA_MODE_WRITE;
        else
                dma_mode = DMA_MODE_READ;

        /*
         * We can not enable DMA on both channels.
         */
        BUG_ON(dma_channel_active(hwif->hw.dma));

        icside_build_sglist(drive, rq);

        /*
         * Ensure that we have the right interrupt routed.
         */
        icside_maskproc(drive, 0);

        /*
         * Route the DMA signals to the correct interface.
         */
        writeb(hwif->select_data, hwif->config_data);

        /*
         * Select the correct timing for this drive.
         */
        set_dma_speed(hwif->hw.dma, drive->drive_data);

        /*
         * Tell the DMA engine about the SG table and
         * data direction.
         */
        set_dma_sg(hwif->hw.dma, hwif->sg_table, hwif->sg_nents);
        set_dma_mode(hwif->hw.dma, dma_mode);

        drive->waiting_for_dma = 1;

        return 0;
}

static void icside_dma_exec_cmd(ide_drive_t *drive, u8 cmd)
{
        /* issue cmd to drive */
        ide_execute_command(drive, cmd, ide_dma_intr, 2 * WAIT_CMD, NULL);
}

static int icside_dma_test_irq(ide_drive_t *drive)
{
        ide_hwif_t *hwif = HWIF(drive);
        struct icside_state *state = hwif->hwif_data;

        return readb(state->irq_port +
                     (hwif->channel ?
                        ICS_ARCIN_V6_INTRSTAT_2 :
                        ICS_ARCIN_V6_INTRSTAT_1)) & 1;
}

static int icside_dma_timeout(ide_drive_t *drive)
{
        printk(KERN_ERR "%s: DMA timeout occurred: ", drive->name);

        if (icside_dma_test_irq(drive))
                return 0;

        ide_dump_status(drive, "DMA timeout",
                HWIF(drive)->INB(IDE_STATUS_REG));

        return icside_dma_end(drive);
}

static int icside_dma_lostirq(ide_drive_t *drive)
{
        printk(KERN_ERR "%s: IRQ lost\n", drive->name);
        return 1;
}

static void icside_dma_init(ide_hwif_t *hwif)
{
        int autodma = 0;

#ifdef CONFIG_IDEDMA_ICS_AUTO
        autodma = 1;
#endif

        printk("    %s: SG-DMA", hwif->name);

        hwif->atapi_dma         = 1;
        hwif->mwdma_mask        = 7; /* MW0..2 */
        hwif->swdma_mask        = 7; /* SW0..2 */

        hwif->dmatable_cpu      = NULL;
        hwif->dmatable_dma      = 0;
        hwif->speedproc         = icside_set_speed;
        hwif->autodma           = autodma;

        hwif->ide_dma_check     = icside_dma_check;
        hwif->ide_dma_host_off  = icside_dma_host_off;
        hwif->ide_dma_off_quietly = icside_dma_off_quietly;
        hwif->ide_dma_host_on   = icside_dma_host_on;
        hwif->ide_dma_on        = icside_dma_on;
        hwif->dma_setup         = icside_dma_setup;
        hwif->dma_exec_cmd      = icside_dma_exec_cmd;
        hwif->dma_start         = icside_dma_start;
        hwif->ide_dma_end       = icside_dma_end;
        hwif->ide_dma_test_irq  = icside_dma_test_irq;
        hwif->ide_dma_timeout   = icside_dma_timeout;
        hwif->ide_dma_lostirq   = icside_dma_lostirq;

        hwif->drives[0].autodma = hwif->autodma;
        hwif->drives[1].autodma = hwif->autodma;

        printk(" capable%s\n", hwif->autodma ? ", auto-enable" : "");
}
#else
#define icside_dma_init(hwif)   (0)
#endif

static ide_hwif_t *icside_find_hwif(unsigned long dataport)
{
        ide_hwif_t *hwif;
        int index;

        for (index = 0; index < MAX_HWIFS; ++index) {
                hwif = &ide_hwifs[index];
                if (hwif->io_ports[IDE_DATA_OFFSET] == dataport)
                        goto found;
        }

        for (index = 0; index < MAX_HWIFS; ++index) {
                hwif = &ide_hwifs[index];
                if (!hwif->io_ports[IDE_DATA_OFFSET])
                        goto found;
        }

        hwif = NULL;
found:
        return hwif;
}

static ide_hwif_t *
icside_setup(void __iomem *base, struct cardinfo *info, struct expansion_card *ec)
{
        unsigned long port = (unsigned long)base + info->dataoffset;
        ide_hwif_t *hwif;

        hwif = icside_find_hwif(port);
        if (hwif) {
                int i;

                memset(&hwif->hw, 0, sizeof(hw_regs_t));

                /*
                 * Ensure we're using MMIO
                 */
                default_hwif_mmiops(hwif);
                hwif->mmio = 2;

                for (i = IDE_DATA_OFFSET; i <= IDE_STATUS_OFFSET; i++) {
                        hwif->hw.io_ports[i] = port;
                        hwif->io_ports[i] = port;
                        port += 1 << info->stepping;
                }
                hwif->hw.io_ports[IDE_CONTROL_OFFSET] = (unsigned long)base + info->ctrloffset;
                hwif->io_ports[IDE_CONTROL_OFFSET] = (unsigned long)base + info->ctrloffset;
                hwif->hw.irq  = ec->irq;
                hwif->irq     = ec->irq;
                hwif->noprobe = 0;
                hwif->chipset = ide_acorn;
                hwif->gendev.parent = &ec->dev;
        }

        return hwif;
}

static int __init
icside_register_v5(struct icside_state *state, struct expansion_card *ec)
{
        ide_hwif_t *hwif;
        void __iomem *base;

        base = ioremap(ecard_resource_start(ec, ECARD_RES_MEMC),
                       ecard_resource_len(ec, ECARD_RES_MEMC));
        if (!base)
                return -ENOMEM;

        state->irq_port = base;

        ec->irqaddr  = base + ICS_ARCIN_V5_INTRSTAT;
        ec->irqmask  = 1;
        ec->irq_data = state;
        ec->ops      = &icside_ops_arcin_v5;

        /*
         * Be on the safe side - disable interrupts
         */
        icside_irqdisable_arcin_v5(ec, 0);

        hwif = icside_setup(base, &icside_cardinfo_v5, ec);
        if (!hwif) {
                iounmap(base);
                return -ENODEV;
        }

        state->hwif[0] = hwif;

        probe_hwif_init(hwif);
        create_proc_ide_interfaces();

        return 0;
}

static int __init
icside_register_v6(struct icside_state *state, struct expansion_card *ec)
{
        ide_hwif_t *hwif, *mate;
        void __iomem *ioc_base, *easi_base;
        unsigned int sel = 0;
        int ret;

        ioc_base = ioremap(ecard_resource_start(ec, ECARD_RES_IOCFAST),
                           ecard_resource_len(ec, ECARD_RES_IOCFAST));
        if (!ioc_base) {
                ret = -ENOMEM;
                goto out;
        }

        easi_base = ioc_base;

        if (ecard_resource_flags(ec, ECARD_RES_EASI)) {
                easi_base = ioremap(ecard_resource_start(ec, ECARD_RES_EASI),
                                    ecard_resource_len(ec, ECARD_RES_EASI));
                if (!easi_base) {
                        ret = -ENOMEM;
                        goto unmap_slot;
                }

                /*
                 * Enable access to the EASI region.
                 */
                sel = 1 << 5;
        }

        writeb(sel, ioc_base);

        ec->irq_data      = state;
        ec->ops           = &icside_ops_arcin_v6;

        state->irq_port   = easi_base;
        state->ioc_base   = ioc_base;

        /*
         * Be on the safe side - disable interrupts
         */
        icside_irqdisable_arcin_v6(ec, 0);

        /*
         * Find and register the interfaces.
         */
        hwif = icside_setup(easi_base, &icside_cardinfo_v6_1, ec);
        mate = icside_setup(easi_base, &icside_cardinfo_v6_2, ec);

        if (!hwif || !mate) {
                ret = -ENODEV;
                goto unmap_port;
        }

        state->hwif[0]    = hwif;
        state->hwif[1]    = mate;

        hwif->maskproc    = icside_maskproc;
        hwif->channel     = 0;
        hwif->hwif_data   = state;
        hwif->mate        = mate;
        hwif->serialized  = 1;
        hwif->config_data = (unsigned long)ioc_base;
        hwif->select_data = sel;
        hwif->hw.dma      = ec->dma;

        mate->maskproc    = icside_maskproc;
        mate->channel     = 1;
        mate->hwif_data   = state;
        mate->mate        = hwif;
        mate->serialized  = 1;
        mate->config_data = (unsigned long)ioc_base;
        mate->select_data = sel | 1;
        mate->hw.dma      = ec->dma;

        if (ec->dma != NO_DMA && !request_dma(ec->dma, hwif->name)) {
                icside_dma_init(hwif);
                icside_dma_init(mate);
        }

        probe_hwif_init(hwif);
        probe_hwif_init(mate);
        create_proc_ide_interfaces();

        return 0;

 unmap_port:
        if (easi_base != ioc_base)
                iounmap(easi_base);
 unmap_slot:
        iounmap(ioc_base);
 out:
        return ret;
}

static int __devinit
icside_probe(struct expansion_card *ec, const struct ecard_id *id)
{
        struct icside_state *state;
        void __iomem *idmem;
        int ret;

        ret = ecard_request_resources(ec);
        if (ret)
                goto out;

        state = kmalloc(sizeof(struct icside_state), GFP_KERNEL);
        if (!state) {
                ret = -ENOMEM;
                goto release;
        }

        memset(state, 0, sizeof(state));
        state->type     = ICS_TYPE_NOTYPE;
        state->dev      = &ec->dev;

        idmem = ioremap(ecard_resource_start(ec, ECARD_RES_IOCFAST),
                        ecard_resource_len(ec, ECARD_RES_IOCFAST));
        if (idmem) {
                unsigned int type;

                type = readb(idmem + ICS_IDENT_OFFSET) & 1;
                type |= (readb(idmem + ICS_IDENT_OFFSET + 4) & 1) << 1;
                type |= (readb(idmem + ICS_IDENT_OFFSET + 8) & 1) << 2;
                type |= (readb(idmem + ICS_IDENT_OFFSET + 12) & 1) << 3;
                iounmap(idmem);

                state->type = type;
        }

        switch (state->type) {
        case ICS_TYPE_A3IN:
                dev_warn(&ec->dev, "A3IN unsupported\n");
                ret = -ENODEV;
                break;

        case ICS_TYPE_A3USER:
                dev_warn(&ec->dev, "A3USER unsupported\n");
                ret = -ENODEV;
                break;

        case ICS_TYPE_V5:
                ret = icside_register_v5(state, ec);
                break;

        case ICS_TYPE_V6:
                ret = icside_register_v6(state, ec);
                break;

        default:
                dev_warn(&ec->dev, "unknown interface type\n");
                ret = -ENODEV;
                break;
        }

        if (ret == 0) {
                ecard_set_drvdata(ec, state);
                goto out;
        }

        kfree(state);
 release:
        ecard_release_resources(ec);
 out:
        return ret;
}

static void __devexit icside_remove(struct expansion_card *ec)
{
        struct icside_state *state = ecard_get_drvdata(ec);

        switch (state->type) {
        case ICS_TYPE_V5:
                /* FIXME: tell IDE to stop using the interface */

                /* Disable interrupts */
                icside_irqdisable_arcin_v5(ec, 0);
                break;

        case ICS_TYPE_V6:
                /* FIXME: tell IDE to stop using the interface */
                if (ec->dma != NO_DMA)
                        free_dma(ec->dma);

                /* Disable interrupts */
                icside_irqdisable_arcin_v6(ec, 0);

                /* Reset the ROM pointer/EASI selection */
                writeb(0, state->ioc_base);
                break;
        }

        ecard_set_drvdata(ec, NULL);
        ec->ops = NULL;
        ec->irq_data = NULL;

        if (state->ioc_base)
                iounmap(state->ioc_base);
        if (state->ioc_base != state->irq_port)
                iounmap(state->irq_port);

        kfree(state);
        ecard_release_resources(ec);
}

static void icside_shutdown(struct expansion_card *ec)
{
        struct icside_state *state = ecard_get_drvdata(ec);
        unsigned long flags;

        /*
         * Disable interrupts from this card.  We need to do
         * this before disabling EASI since we may be accessing
         * this register via that region.
         */
        local_irq_save(flags);
        ec->ops->irqdisable(ec, 0);
        local_irq_restore(flags);

        /*
         * Reset the ROM pointer so that we can read the ROM
         * after a soft reboot.  This also disables access to
         * the IDE taskfile via the EASI region.
         */
        if (state->ioc_base)
                writeb(0, state->ioc_base);
}

static const struct ecard_id icside_ids[] = {
        { MANU_ICS,  PROD_ICS_IDE  },
        { MANU_ICS2, PROD_ICS2_IDE },
        { 0xffff, 0xffff }
};

static struct ecard_driver icside_driver = {
        .probe          = icside_probe,
        .remove         = __devexit_p(icside_remove),
        .shutdown       = icside_shutdown,
        .id_table       = icside_ids,
        .drv = {
                .name   = "icside",
        },
};

static int __init icside_init(void)
{
        return ecard_register_driver(&icside_driver);
}

MODULE_AUTHOR("Russell King <rmk@arm.linux.org.uk>");
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("ICS IDE driver");

module_init(icside_init);