2 #ifndef _LINUX_INTERRUPT_H
3 #define _LINUX_INTERRUPT_H
5 #include <linux/kernel.h>
6 #include <linux/linkage.h>
7 #include <linux/bitops.h>
8 #include <linux/preempt.h>
9 #include <linux/cpumask.h>
10 #include <linux/irqreturn.h>
11 #include <linux/hardirq.h>
12 #include <linux/sched.h>
13 #include <linux/irqflags.h>
14 #include <asm/atomic.h>
15 #include <asm/ptrace.h>
16 #include <asm/system.h>
19 * These correspond to the IORESOURCE_IRQ_* defines in
20 * linux/ioport.h to select the interrupt line behaviour. When
21 * requesting an interrupt without specifying a IRQF_TRIGGER, the
22 * setting should be assumed to be "as already configured", which
23 * may be as per machine or firmware initialisation.
25 #define IRQF_TRIGGER_NONE 0x00000000
26 #define IRQF_TRIGGER_RISING 0x00000001
27 #define IRQF_TRIGGER_FALLING 0x00000002
28 #define IRQF_TRIGGER_HIGH 0x00000004
29 #define IRQF_TRIGGER_LOW 0x00000008
30 #define IRQF_TRIGGER_MASK (IRQF_TRIGGER_HIGH | IRQF_TRIGGER_LOW | \
31 IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING)
32 #define IRQF_TRIGGER_PROBE 0x00000010
35 * These flags used only by the kernel as part of the
36 * irq handling routines.
38 * IRQF_DISABLED - keep irqs disabled when calling the action handler
39 * IRQF_SAMPLE_RANDOM - irq is used to feed the random generator
40 * IRQF_SHARED - allow sharing the irq among several devices
41 * IRQF_PROBE_SHARED - set by callers when they expect sharing mismatches to occur
42 * IRQF_TIMER - Flag to mark this interrupt as timer interrupt
43 * IRQF_PERCPU - Interrupt is per cpu
44 * IRQF_NOBALANCING - Flag to exclude this interrupt from irq balancing
45 * IRQF_IRQPOLL - Interrupt is used for polling (only the interrupt that is
46 * registered first in an shared interrupt is considered for
47 * performance reasons)
49 #define IRQF_DISABLED 0x00000020
50 #define IRQF_SAMPLE_RANDOM 0x00000040
51 #define IRQF_SHARED 0x00000080
52 #define IRQF_PROBE_SHARED 0x00000100
53 #define IRQF_TIMER 0x00000200
54 #define IRQF_PERCPU 0x00000400
55 #define IRQF_NOBALANCING 0x00000800
56 #define IRQF_IRQPOLL 0x00001000
58 typedef irqreturn_t (*irq_handler_t
)(int, void *);
61 irq_handler_t handler
;
66 struct irqaction
*next
;
68 struct proc_dir_entry
*dir
;
71 extern irqreturn_t
no_action(int cpl
, void *dev_id
);
72 extern int __must_check
request_irq(unsigned int, irq_handler_t handler
,
73 unsigned long, const char *, void *);
74 extern void free_irq(unsigned int, void *);
78 extern int __must_check
devm_request_irq(struct device
*dev
, unsigned int irq
,
79 irq_handler_t handler
, unsigned long irqflags
,
80 const char *devname
, void *dev_id
);
81 extern void devm_free_irq(struct device
*dev
, unsigned int irq
, void *dev_id
);
84 * On lockdep we dont want to enable hardirqs in hardirq
85 * context. Use local_irq_enable_in_hardirq() to annotate
86 * kernel code that has to do this nevertheless (pretty much
87 * the only valid case is for old/broken hardware that is
90 * NOTE: in theory this might break fragile code that relies
91 * on hardirq delivery - in practice we dont seem to have such
92 * places left. So the only effect should be slightly increased
96 # define local_irq_enable_in_hardirq() do { } while (0)
98 # define local_irq_enable_in_hardirq() local_irq_enable()
101 extern void disable_irq_nosync(unsigned int irq
);
102 extern void disable_irq(unsigned int irq
);
103 extern void enable_irq(unsigned int irq
);
105 #if defined(CONFIG_SMP) && defined(CONFIG_GENERIC_HARDIRQS)
107 extern int irq_set_affinity(unsigned int irq
, cpumask_t cpumask
);
108 extern int irq_can_set_affinity(unsigned int irq
);
110 #else /* CONFIG_SMP */
112 static inline int irq_set_affinity(unsigned int irq
, cpumask_t cpumask
)
117 static inline int irq_can_set_affinity(unsigned int irq
)
122 #endif /* CONFIG_SMP && CONFIG_GENERIC_HARDIRQS */
124 #ifdef CONFIG_GENERIC_HARDIRQS
126 * Special lockdep variants of irq disabling/enabling.
127 * These should be used for locking constructs that
128 * know that a particular irq context which is disabled,
129 * and which is the only irq-context user of a lock,
130 * that it's safe to take the lock in the irq-disabled
131 * section without disabling hardirqs.
133 * On !CONFIG_LOCKDEP they are equivalent to the normal
134 * irq disable/enable methods.
136 static inline void disable_irq_nosync_lockdep(unsigned int irq
)
138 disable_irq_nosync(irq
);
139 #ifdef CONFIG_LOCKDEP
144 static inline void disable_irq_nosync_lockdep_irqsave(unsigned int irq
, unsigned long *flags
)
146 disable_irq_nosync(irq
);
147 #ifdef CONFIG_LOCKDEP
148 local_irq_save(*flags
);
152 static inline void disable_irq_lockdep(unsigned int irq
)
155 #ifdef CONFIG_LOCKDEP
160 static inline void enable_irq_lockdep(unsigned int irq
)
162 #ifdef CONFIG_LOCKDEP
168 static inline void enable_irq_lockdep_irqrestore(unsigned int irq
, unsigned long *flags
)
170 #ifdef CONFIG_LOCKDEP
171 local_irq_restore(*flags
);
176 /* IRQ wakeup (PM) control: */
177 extern int set_irq_wake(unsigned int irq
, unsigned int on
);
179 static inline int enable_irq_wake(unsigned int irq
)
181 return set_irq_wake(irq
, 1);
184 static inline int disable_irq_wake(unsigned int irq
)
186 return set_irq_wake(irq
, 0);
189 #else /* !CONFIG_GENERIC_HARDIRQS */
191 * NOTE: non-genirq architectures, if they want to support the lock
192 * validator need to define the methods below in their asm/irq.h
193 * files, under an #ifdef CONFIG_LOCKDEP section.
195 #ifndef CONFIG_LOCKDEP
196 # define disable_irq_nosync_lockdep(irq) disable_irq_nosync(irq)
197 # define disable_irq_nosync_lockdep_irqsave(irq, flags) \
198 disable_irq_nosync(irq)
199 # define disable_irq_lockdep(irq) disable_irq(irq)
200 # define enable_irq_lockdep(irq) enable_irq(irq)
201 # define enable_irq_lockdep_irqrestore(irq, flags) \
205 static inline int enable_irq_wake(unsigned int irq
)
210 static inline int disable_irq_wake(unsigned int irq
)
214 #endif /* CONFIG_GENERIC_HARDIRQS */
216 #ifndef __ARCH_SET_SOFTIRQ_PENDING
217 #define set_softirq_pending(x) (local_softirq_pending() = (x))
218 #define or_softirq_pending(x) (local_softirq_pending() |= (x))
222 * Temporary defines for UP kernels, until all code gets fixed.
225 static inline void __deprecated
cli(void)
229 static inline void __deprecated
sti(void)
233 static inline void __deprecated
save_flags(unsigned long *x
)
235 local_save_flags(*x
);
237 #define save_flags(x) save_flags(&x)
238 static inline void __deprecated
restore_flags(unsigned long x
)
240 local_irq_restore(x
);
243 static inline void __deprecated
save_and_cli(unsigned long *x
)
247 #define save_and_cli(x) save_and_cli(&x)
248 #endif /* CONFIG_SMP */
250 /* Some architectures might implement lazy enabling/disabling of
251 * interrupts. In some cases, such as stop_machine, we might want
252 * to ensure that after a local_irq_disable(), interrupts have
253 * really been disabled in hardware. Such architectures need to
254 * implement the following hook.
256 #ifndef hard_irq_disable
257 #define hard_irq_disable() do { } while(0)
260 /* PLEASE, avoid to allocate new softirqs, if you need not _really_ high
261 frequency threaded job scheduling. For almost all the purposes
262 tasklets are more than enough. F.e. all serial device BHs et
263 al. should be converted to tasklets, not to softirqs.
275 #ifdef CONFIG_HIGH_RES_TIMERS
278 RCU_SOFTIRQ
, /* Preferable RCU should always be the last softirq */
281 /* softirq mask and active fields moved to irq_cpustat_t in
282 * asm/hardirq.h to get better cache usage. KAO
285 struct softirq_action
287 void (*action
)(struct softirq_action
*);
291 asmlinkage
void do_softirq(void);
292 asmlinkage
void __do_softirq(void);
293 extern void open_softirq(int nr
, void (*action
)(struct softirq_action
*), void *data
);
294 extern void softirq_init(void);
295 #define __raise_softirq_irqoff(nr) do { or_softirq_pending(1UL << (nr)); } while (0)
296 extern void raise_softirq_irqoff(unsigned int nr
);
297 extern void raise_softirq(unsigned int nr
);
300 /* Tasklets --- multithreaded analogue of BHs.
302 Main feature differing them of generic softirqs: tasklet
303 is running only on one CPU simultaneously.
305 Main feature differing them of BHs: different tasklets
306 may be run simultaneously on different CPUs.
309 * If tasklet_schedule() is called, then tasklet is guaranteed
310 to be executed on some cpu at least once after this.
311 * If the tasklet is already scheduled, but its excecution is still not
312 started, it will be executed only once.
313 * If this tasklet is already running on another CPU (or schedule is called
314 from tasklet itself), it is rescheduled for later.
315 * Tasklet is strictly serialized wrt itself, but not
316 wrt another tasklets. If client needs some intertask synchronization,
317 he makes it with spinlocks.
320 struct tasklet_struct
322 struct tasklet_struct
*next
;
325 void (*func
)(unsigned long);
329 #define DECLARE_TASKLET(name, func, data) \
330 struct tasklet_struct name = { NULL, 0, ATOMIC_INIT(0), func, data }
332 #define DECLARE_TASKLET_DISABLED(name, func, data) \
333 struct tasklet_struct name = { NULL, 0, ATOMIC_INIT(1), func, data }
338 TASKLET_STATE_SCHED
, /* Tasklet is scheduled for execution */
339 TASKLET_STATE_RUN
/* Tasklet is running (SMP only) */
343 static inline int tasklet_trylock(struct tasklet_struct
*t
)
345 return !test_and_set_bit(TASKLET_STATE_RUN
, &(t
)->state
);
348 static inline void tasklet_unlock(struct tasklet_struct
*t
)
350 smp_mb__before_clear_bit();
351 clear_bit(TASKLET_STATE_RUN
, &(t
)->state
);
354 static inline void tasklet_unlock_wait(struct tasklet_struct
*t
)
356 while (test_bit(TASKLET_STATE_RUN
, &(t
)->state
)) { barrier(); }
359 #define tasklet_trylock(t) 1
360 #define tasklet_unlock_wait(t) do { } while (0)
361 #define tasklet_unlock(t) do { } while (0)
364 extern void __tasklet_schedule(struct tasklet_struct
*t
);
366 static inline void tasklet_schedule(struct tasklet_struct
*t
)
368 if (!test_and_set_bit(TASKLET_STATE_SCHED
, &t
->state
))
369 __tasklet_schedule(t
);
372 extern void __tasklet_hi_schedule(struct tasklet_struct
*t
);
374 static inline void tasklet_hi_schedule(struct tasklet_struct
*t
)
376 if (!test_and_set_bit(TASKLET_STATE_SCHED
, &t
->state
))
377 __tasklet_hi_schedule(t
);
381 static inline void tasklet_disable_nosync(struct tasklet_struct
*t
)
383 atomic_inc(&t
->count
);
384 smp_mb__after_atomic_inc();
387 static inline void tasklet_disable(struct tasklet_struct
*t
)
389 tasklet_disable_nosync(t
);
390 tasklet_unlock_wait(t
);
394 static inline void tasklet_enable(struct tasklet_struct
*t
)
396 smp_mb__before_atomic_dec();
397 atomic_dec(&t
->count
);
400 static inline void tasklet_hi_enable(struct tasklet_struct
*t
)
402 smp_mb__before_atomic_dec();
403 atomic_dec(&t
->count
);
406 extern void tasklet_kill(struct tasklet_struct
*t
);
407 extern void tasklet_kill_immediate(struct tasklet_struct
*t
, unsigned int cpu
);
408 extern void tasklet_init(struct tasklet_struct
*t
,
409 void (*func
)(unsigned long), unsigned long data
);
412 * Autoprobing for irqs:
414 * probe_irq_on() and probe_irq_off() provide robust primitives
415 * for accurate IRQ probing during kernel initialization. They are
416 * reasonably simple to use, are not "fooled" by spurious interrupts,
417 * and, unlike other attempts at IRQ probing, they do not get hung on
418 * stuck interrupts (such as unused PS2 mouse interfaces on ASUS boards).
420 * For reasonably foolproof probing, use them as follows:
422 * 1. clear and/or mask the device's internal interrupt.
424 * 3. irqs = probe_irq_on(); // "take over" all unassigned idle IRQs
425 * 4. enable the device and cause it to trigger an interrupt.
426 * 5. wait for the device to interrupt, using non-intrusive polling or a delay.
427 * 6. irq = probe_irq_off(irqs); // get IRQ number, 0=none, negative=multiple
428 * 7. service the device to clear its pending interrupt.
429 * 8. loop again if paranoia is required.
431 * probe_irq_on() returns a mask of allocated irq's.
433 * probe_irq_off() takes the mask as a parameter,
434 * and returns the irq number which occurred,
435 * or zero if none occurred, or a negative irq number
436 * if more than one irq occurred.
439 #if defined(CONFIG_GENERIC_HARDIRQS) && !defined(CONFIG_GENERIC_IRQ_PROBE)
440 static inline unsigned long probe_irq_on(void)
444 static inline int probe_irq_off(unsigned long val
)
448 static inline unsigned int probe_irq_mask(unsigned long val
)
453 extern unsigned long probe_irq_on(void); /* returns 0 on failure */
454 extern int probe_irq_off(unsigned long); /* returns 0 or negative on failure */
455 extern unsigned int probe_irq_mask(unsigned long); /* returns mask of ISA interrupts */
458 #ifdef CONFIG_PROC_FS
459 /* Initialize /proc/irq/ */
460 extern void init_irq_proc(void);
462 static inline void init_irq_proc(void)
467 int show_interrupts(struct seq_file
*p
, void *v
);