[Blackfin] arch: Fix BUG gpio_direction_output API is not compatitable with GENERIC_G...
[linux-2.6/linux-2.6-openrd.git] / include / asm-blackfin / mach-bf533 / bfin_serial_5xx.h
blob7871d4313f49b3d7751c4cbe779d5fa321ea789c
1 #include <linux/serial.h>
2 #include <asm/dma.h>
3 #include <asm/portmux.h>
5 #define NR_PORTS 1
7 #define OFFSET_THR 0x00 /* Transmit Holding register */
8 #define OFFSET_RBR 0x00 /* Receive Buffer register */
9 #define OFFSET_DLL 0x00 /* Divisor Latch (Low-Byte) */
10 #define OFFSET_IER 0x04 /* Interrupt Enable Register */
11 #define OFFSET_DLH 0x04 /* Divisor Latch (High-Byte) */
12 #define OFFSET_IIR 0x08 /* Interrupt Identification Register */
13 #define OFFSET_LCR 0x0C /* Line Control Register */
14 #define OFFSET_MCR 0x10 /* Modem Control Register */
15 #define OFFSET_LSR 0x14 /* Line Status Register */
16 #define OFFSET_MSR 0x18 /* Modem Status Register */
17 #define OFFSET_SCR 0x1C /* SCR Scratch Register */
18 #define OFFSET_GCTL 0x24 /* Global Control Register */
20 #define UART_GET_CHAR(uart) bfin_read16(((uart)->port.membase + OFFSET_RBR))
21 #define UART_GET_DLL(uart) bfin_read16(((uart)->port.membase + OFFSET_DLL))
22 #define UART_GET_IER(uart) bfin_read16(((uart)->port.membase + OFFSET_IER))
23 #define UART_GET_DLH(uart) bfin_read16(((uart)->port.membase + OFFSET_DLH))
24 #define UART_GET_IIR(uart) bfin_read16(((uart)->port.membase + OFFSET_IIR))
25 #define UART_GET_LCR(uart) bfin_read16(((uart)->port.membase + OFFSET_LCR))
26 #define UART_GET_LSR(uart) bfin_read16(((uart)->port.membase + OFFSET_LSR))
27 #define UART_GET_GCTL(uart) bfin_read16(((uart)->port.membase + OFFSET_GCTL))
29 #define UART_PUT_CHAR(uart,v) bfin_write16(((uart)->port.membase + OFFSET_THR),v)
30 #define UART_PUT_DLL(uart,v) bfin_write16(((uart)->port.membase + OFFSET_DLL),v)
31 #define UART_PUT_IER(uart,v) bfin_write16(((uart)->port.membase + OFFSET_IER),v)
32 #define UART_PUT_DLH(uart,v) bfin_write16(((uart)->port.membase + OFFSET_DLH),v)
33 #define UART_PUT_LCR(uart,v) bfin_write16(((uart)->port.membase + OFFSET_LCR),v)
34 #define UART_PUT_GCTL(uart,v) bfin_write16(((uart)->port.membase + OFFSET_GCTL),v)
36 #ifdef CONFIG_BFIN_UART0_CTSRTS
37 # define CONFIG_SERIAL_BFIN_CTSRTS
38 # ifndef CONFIG_UART0_CTS_PIN
39 # define CONFIG_UART0_CTS_PIN -1
40 # endif
41 # ifndef CONFIG_UART0_RTS_PIN
42 # define CONFIG_UART0_RTS_PIN -1
43 # endif
44 #endif
46 struct bfin_serial_port {
47 struct uart_port port;
48 unsigned int old_status;
49 #ifdef CONFIG_SERIAL_BFIN_DMA
50 int tx_done;
51 int tx_count;
52 struct circ_buf rx_dma_buf;
53 struct timer_list rx_dma_timer;
54 int rx_dma_nrows;
55 unsigned int tx_dma_channel;
56 unsigned int rx_dma_channel;
57 struct work_struct tx_dma_workqueue;
58 #else
59 struct work_struct cts_workqueue;
60 #endif
61 #ifdef CONFIG_SERIAL_BFIN_CTSRTS
62 int cts_pin;
63 int rts_pin;
64 #endif
67 struct bfin_serial_port bfin_serial_ports[NR_PORTS];
68 struct bfin_serial_res {
69 unsigned long uart_base_addr;
70 int uart_irq;
71 #ifdef CONFIG_SERIAL_BFIN_DMA
72 unsigned int uart_tx_dma_channel;
73 unsigned int uart_rx_dma_channel;
74 #endif
75 #ifdef CONFIG_SERIAL_BFIN_CTSRTS
76 int uart_cts_pin;
77 int uart_rts_pin;
78 #endif
81 struct bfin_serial_res bfin_serial_resource[] = {
83 0xFFC00400,
84 IRQ_UART_RX,
85 #ifdef CONFIG_SERIAL_BFIN_DMA
86 CH_UART_TX,
87 CH_UART_RX,
88 #endif
89 #ifdef CONFIG_BFIN_UART0_CTSRTS
90 CONFIG_UART0_CTS_PIN,
91 CONFIG_UART0_RTS_PIN,
92 #endif
96 #define DRIVER_NAME "bfin-uart"
98 int nr_ports = NR_PORTS;
99 static void bfin_serial_hw_init(struct bfin_serial_port *uart)
102 #ifdef CONFIG_SERIAL_BFIN_UART0
103 peripheral_request(P_UART0_TX, DRIVER_NAME);
104 peripheral_request(P_UART0_RX, DRIVER_NAME);
105 #endif
107 #ifdef CONFIG_SERIAL_BFIN_CTSRTS
108 if (uart->cts_pin >= 0) {
109 gpio_request(uart->cts_pin, DRIVER_NAME);
110 gpio_direction_input(uart->cts_pin);
112 if (uart->rts_pin >= 0) {
113 gpio_request(uart->rts_pin, DRIVER_NAME);
114 gpio_direction_input(uart->rts_pin, 0);
116 #endif