drivers/ssb/pci.c

   1 /*
   2  * Sonics Silicon Backplane PCI-Hostbus related functions.
   3  *
   4  * Copyright (C) 2005-2006 Michael Buesch <mb@bu3sch.de>
   5  * Copyright (C) 2005 Martin Langer <martin-langer@gmx.de>
   6  * Copyright (C) 2005 Stefano Brivio <st3@riseup.net>
   7  * Copyright (C) 2005 Danny van Dyk <kugelfang@gentoo.org>
   8  * Copyright (C) 2005 Andreas Jaggi <andreas.jaggi@waterwave.ch>
   9  *
  10  * Derived from the Broadcom 4400 device driver.
  11  * Copyright (C) 2002 David S. Miller (davem@redhat.com)
  12  * Fixed by Pekka Pietikainen (pp@ee.oulu.fi)
  13  * Copyright (C) 2006 Broadcom Corporation.
  14  *
  15  * Licensed under the GNU/GPL. See COPYING for details.
  16  */
  17
  18 #include <linux/ssb/ssb.h>
  19 #include <linux/ssb/ssb_regs.h>
  20 #include <linux/pci.h>
  21 #include <linux/delay.h>
  22
  23 #include "ssb_private.h"
  24
  25
  26 /* Define the following to 1 to enable a printk on each coreswitch. */
  27 #define SSB_VERBOSE_PCICORESWITCH_DEBUG         0
  28
  29
  30 /* Lowlevel coreswitching */
  31 int ssb_pci_switch_coreidx(struct ssb_bus *bus, u8 coreidx)
  32 {
  33         int err;
  34         int attempts = 0;
  35         u32 cur_core;
  36
  37         while (1) {
  38                 err = pci_write_config_dword(bus->host_pci, SSB_BAR0_WIN,
  39                                              (coreidx * SSB_CORE_SIZE)
  40                                              + SSB_ENUM_BASE);
  41                 if (err)
  42                         goto error;
  43                 err = pci_read_config_dword(bus->host_pci, SSB_BAR0_WIN,
  44                                             &cur_core);
  45                 if (err)
  46                         goto error;
  47                 cur_core = (cur_core - SSB_ENUM_BASE)
  48                            / SSB_CORE_SIZE;
  49                 if (cur_core == coreidx)
  50                         break;
  51
  52                 if (attempts++ > SSB_BAR0_MAX_RETRIES)
  53                         goto error;
  54                 udelay(10);
  55         }
  56         return 0;
  57 error:
  58         ssb_printk(KERN_ERR PFX "Failed to switch to core %u\n", coreidx);
  59         return -ENODEV;
  60 }
  61
  62 int ssb_pci_switch_core(struct ssb_bus *bus,
  63                         struct ssb_device *dev)
  64 {
  65         int err;
  66         unsigned long flags;
  67
  68 #if SSB_VERBOSE_PCICORESWITCH_DEBUG
  69         ssb_printk(KERN_INFO PFX
  70                    "Switching to %s core, index %d\n",
  71                    ssb_core_name(dev->id.coreid),
  72                    dev->core_index);
  73 #endif
  74
  75         spin_lock_irqsave(&bus->bar_lock, flags);
  76         err = ssb_pci_switch_coreidx(bus, dev->core_index);
  77         if (!err)
  78                 bus->mapped_device = dev;
  79         spin_unlock_irqrestore(&bus->bar_lock, flags);
  80
  81         return err;
  82 }
  83
  84 /* Enable/disable the on board crystal oscillator and/or PLL. */
  85 int ssb_pci_xtal(struct ssb_bus *bus, u32 what, int turn_on)
  86 {
  87         int err;
  88         u32 in, out, outenable;
  89         u16 pci_status;
  90
  91         if (bus->bustype != SSB_BUSTYPE_PCI)
  92                 return 0;
  93
  94         err = pci_read_config_dword(bus->host_pci, SSB_GPIO_IN, &in);
  95         if (err)
  96                 goto err_pci;
  97         err = pci_read_config_dword(bus->host_pci, SSB_GPIO_OUT, &out);
  98         if (err)
  99                 goto err_pci;
 100         err = pci_read_config_dword(bus->host_pci, SSB_GPIO_OUT_ENABLE, &outenable);
 101         if (err)
 102                 goto err_pci;
 103
 104         outenable |= what;
 105
 106         if (turn_on) {
 107                 /* Avoid glitching the clock if GPRS is already using it.
 108                  * We can't actually read the state of the PLLPD so we infer it
 109                  * by the value of XTAL_PU which *is* readable via gpioin.
 110                  */
 111                 if (!(in & SSB_GPIO_XTAL)) {
 112                         if (what & SSB_GPIO_XTAL) {
 113                                 /* Turn the crystal on */
 114                                 out |= SSB_GPIO_XTAL;
 115                                 if (what & SSB_GPIO_PLL)
 116                                         out |= SSB_GPIO_PLL;
 117                                 err = pci_write_config_dword(bus->host_pci, SSB_GPIO_OUT, out);
 118                                 if (err)
 119                                         goto err_pci;
 120                                 err = pci_write_config_dword(bus->host_pci, SSB_GPIO_OUT_ENABLE,
 121                                                              outenable);
 122                                 if (err)
 123                                         goto err_pci;
 124                                 msleep(1);
 125                         }
 126                         if (what & SSB_GPIO_PLL) {
 127                                 /* Turn the PLL on */
 128                                 out &= ~SSB_GPIO_PLL;
 129                                 err = pci_write_config_dword(bus->host_pci, SSB_GPIO_OUT, out);
 130                                 if (err)
 131                                         goto err_pci;
 132                                 msleep(5);
 133                         }
 134                 }
 135
 136                 err = pci_read_config_word(bus->host_pci, PCI_STATUS, &pci_status);
 137                 if (err)
 138                         goto err_pci;
 139                 pci_status &= ~PCI_STATUS_SIG_TARGET_ABORT;
 140                 err = pci_write_config_word(bus->host_pci, PCI_STATUS, pci_status);
 141                 if (err)
 142                         goto err_pci;
 143         } else {
 144                 if (what & SSB_GPIO_XTAL) {
 145                         /* Turn the crystal off */
 146                         out &= ~SSB_GPIO_XTAL;
 147                 }
 148                 if (what & SSB_GPIO_PLL) {
 149                         /* Turn the PLL off */
 150                         out |= SSB_GPIO_PLL;
 151                 }
 152                 err = pci_write_config_dword(bus->host_pci, SSB_GPIO_OUT, out);
 153                 if (err)
 154                         goto err_pci;
 155                 err = pci_write_config_dword(bus->host_pci, SSB_GPIO_OUT_ENABLE, outenable);
 156                 if (err)
 157                         goto err_pci;
 158         }
 159
 160 out:
 161         return err;
 162
 163 err_pci:
 164         printk(KERN_ERR PFX "Error: ssb_pci_xtal() could not access PCI config space!\n");
 165         err = -EBUSY;
 166         goto out;
 167 }
 168
 169 /* Get the word-offset for a SSB_SPROM_XXX define. */
 170 #define SPOFF(offset)   (((offset) - SSB_SPROM_BASE) / sizeof(u16))
 171 /* Helper to extract some _offset, which is one of the SSB_SPROM_XXX defines. */
 172 #define SPEX(_outvar, _offset, _mask, _shift)   \
 173         out->_outvar = ((in[SPOFF(_offset)] & (_mask)) >> (_shift))
 174
 175 static inline u8 ssb_crc8(u8 crc, u8 data)
 176 {
 177         /* Polynomial:   x^8 + x^7 + x^6 + x^4 + x^2 + 1   */
 178         static const u8 t[] = {
 179                 0x00, 0xF7, 0xB9, 0x4E, 0x25, 0xD2, 0x9C, 0x6B,
 180                 0x4A, 0xBD, 0xF3, 0x04, 0x6F, 0x98, 0xD6, 0x21,
 181                 0x94, 0x63, 0x2D, 0xDA, 0xB1, 0x46, 0x08, 0xFF,
 182                 0xDE, 0x29, 0x67, 0x90, 0xFB, 0x0C, 0x42, 0xB5,
 183                 0x7F, 0x88, 0xC6, 0x31, 0x5A, 0xAD, 0xE3, 0x14,
 184                 0x35, 0xC2, 0x8C, 0x7B, 0x10, 0xE7, 0xA9, 0x5E,
 185                 0xEB, 0x1C, 0x52, 0xA5, 0xCE, 0x39, 0x77, 0x80,
 186                 0xA1, 0x56, 0x18, 0xEF, 0x84, 0x73, 0x3D, 0xCA,
 187                 0xFE, 0x09, 0x47, 0xB0, 0xDB, 0x2C, 0x62, 0x95,
 188                 0xB4, 0x43, 0x0D, 0xFA, 0x91, 0x66, 0x28, 0xDF,
 189                 0x6A, 0x9D, 0xD3, 0x24, 0x4F, 0xB8, 0xF6, 0x01,
 190                 0x20, 0xD7, 0x99, 0x6E, 0x05, 0xF2, 0xBC, 0x4B,
 191                 0x81, 0x76, 0x38, 0xCF, 0xA4, 0x53, 0x1D, 0xEA,
 192                 0xCB, 0x3C, 0x72, 0x85, 0xEE, 0x19, 0x57, 0xA0,
 193                 0x15, 0xE2, 0xAC, 0x5B, 0x30, 0xC7, 0x89, 0x7E,
 194                 0x5F, 0xA8, 0xE6, 0x11, 0x7A, 0x8D, 0xC3, 0x34,
 195                 0xAB, 0x5C, 0x12, 0xE5, 0x8E, 0x79, 0x37, 0xC0,
 196                 0xE1, 0x16, 0x58, 0xAF, 0xC4, 0x33, 0x7D, 0x8A,
 197                 0x3F, 0xC8, 0x86, 0x71, 0x1A, 0xED, 0xA3, 0x54,
 198                 0x75, 0x82, 0xCC, 0x3B, 0x50, 0xA7, 0xE9, 0x1E,
 199                 0xD4, 0x23, 0x6D, 0x9A, 0xF1, 0x06, 0x48, 0xBF,
 200                 0x9E, 0x69, 0x27, 0xD0, 0xBB, 0x4C, 0x02, 0xF5,
 201                 0x40, 0xB7, 0xF9, 0x0E, 0x65, 0x92, 0xDC, 0x2B,
 202                 0x0A, 0xFD, 0xB3, 0x44, 0x2F, 0xD8, 0x96, 0x61,
 203                 0x55, 0xA2, 0xEC, 0x1B, 0x70, 0x87, 0xC9, 0x3E,
 204                 0x1F, 0xE8, 0xA6, 0x51, 0x3A, 0xCD, 0x83, 0x74,
 205                 0xC1, 0x36, 0x78, 0x8F, 0xE4, 0x13, 0x5D, 0xAA,
 206                 0x8B, 0x7C, 0x32, 0xC5, 0xAE, 0x59, 0x17, 0xE0,
 207                 0x2A, 0xDD, 0x93, 0x64, 0x0F, 0xF8, 0xB6, 0x41,
 208                 0x60, 0x97, 0xD9, 0x2E, 0x45, 0xB2, 0xFC, 0x0B,
 209                 0xBE, 0x49, 0x07, 0xF0, 0x9B, 0x6C, 0x22, 0xD5,
 210                 0xF4, 0x03, 0x4D, 0xBA, 0xD1, 0x26, 0x68, 0x9F,
 211         };
 212         return t[crc ^ data];
 213 }
 214
 215 static u8 ssb_sprom_crc(const u16 *sprom, u16 size)
 216 {
 217         int word;
 218         u8 crc = 0xFF;
 219
 220         for (word = 0; word < size - 1; word++) {
 221                 crc = ssb_crc8(crc, sprom[word] & 0x00FF);
 222                 crc = ssb_crc8(crc, (sprom[word] & 0xFF00) >> 8);
 223         }
 224         crc = ssb_crc8(crc, sprom[size - 1] & 0x00FF);
 225         crc ^= 0xFF;
 226
 227         return crc;
 228 }
 229
 230 static int sprom_check_crc(const u16 *sprom, u16 size)
 231 {
 232         u8 crc;
 233         u8 expected_crc;
 234         u16 tmp;
 235
 236         crc = ssb_sprom_crc(sprom, size);
 237         tmp = sprom[size - 1] & SSB_SPROM_REVISION_CRC;
 238         expected_crc = tmp >> SSB_SPROM_REVISION_CRC_SHIFT;
 239         if (crc != expected_crc)
 240                 return -EPROTO;
 241
 242         return 0;
 243 }
 244
 245 static void sprom_do_read(struct ssb_bus *bus, u16 *sprom)
 246 {
 247         int i;
 248
 249         for (i = 0; i < bus->sprom_size; i++)
 250                 sprom[i] = ioread16(bus->mmio + SSB_SPROM_BASE + (i * 2));
 251 }
 252
 253 static int sprom_do_write(struct ssb_bus *bus, const u16 *sprom)
 254 {
 255         struct pci_dev *pdev = bus->host_pci;
 256         int i, err;
 257         u32 spromctl;
 258         u16 size = bus->sprom_size;
 259
 260         ssb_printk(KERN_NOTICE PFX "Writing SPROM. Do NOT turn off the power! Please stand by...\n");
 261         err = pci_read_config_dword(pdev, SSB_SPROMCTL, &spromctl);
 262         if (err)
 263                 goto err_ctlreg;
 264         spromctl |= SSB_SPROMCTL_WE;
 265         err = pci_write_config_dword(pdev, SSB_SPROMCTL, spromctl);
 266         if (err)
 267                 goto err_ctlreg;
 268         ssb_printk(KERN_NOTICE PFX "[ 0%%");
 269         msleep(500);
 270         for (i = 0; i < size; i++) {
 271                 if (i == size / 4)
 272                         ssb_printk("25%%");
 273                 else if (i == size / 2)
 274                         ssb_printk("50%%");
 275                 else if (i == (size * 3) / 4)
 276                         ssb_printk("75%%");
 277                 else if (i % 2)
 278                         ssb_printk(".");
 279                 writew(sprom[i], bus->mmio + SSB_SPROM_BASE + (i * 2));
 280                 mmiowb();
 281                 msleep(20);
 282         }
 283         err = pci_read_config_dword(pdev, SSB_SPROMCTL, &spromctl);
 284         if (err)
 285                 goto err_ctlreg;
 286         spromctl &= ~SSB_SPROMCTL_WE;
 287         err = pci_write_config_dword(pdev, SSB_SPROMCTL, spromctl);
 288         if (err)
 289                 goto err_ctlreg;
 290         msleep(500);
 291         ssb_printk("100%% ]\n");
 292         ssb_printk(KERN_NOTICE PFX "SPROM written.\n");
 293
 294         return 0;
 295 err_ctlreg:
 296         ssb_printk(KERN_ERR PFX "Could not access SPROM control register.\n");
 297         return err;
 298 }
 299
 300 static s8 r123_extract_antgain(u8 sprom_revision, const u16 *in,
 301                                u16 mask, u16 shift)
 302 {
 303         u16 v;
 304         u8 gain;
 305
 306         v = in[SPOFF(SSB_SPROM1_AGAIN)];
 307         gain = (v & mask) >> shift;
 308         if (gain == 0xFF)
 309                 gain = 2; /* If unset use 2dBm */
 310         if (sprom_revision == 1) {
 311                 /* Convert to Q5.2 */
 312                 gain <<= 2;
 313         } else {
 314                 /* Q5.2 Fractional part is stored in 0xC0 */
 315                 gain = ((gain & 0xC0) >> 6) | ((gain & 0x3F) << 2);
 316         }
 317
 318         return (s8)gain;
 319 }
 320
 321 static void sprom_extract_r123(struct ssb_sprom *out, const u16 *in)
 322 {
 323         int i;
 324         u16 v;
 325         s8 gain;
 326         u16 loc[3];
 327
 328         if (out->revision == 3) {                       /* rev 3 moved MAC */
 329                 loc[0] = SSB_SPROM3_IL0MAC;
 330                 loc[1] = SSB_SPROM3_ET0MAC;
 331                 loc[2] = SSB_SPROM3_ET1MAC;
 332         } else {
 333                 loc[0] = SSB_SPROM1_IL0MAC;
 334                 loc[1] = SSB_SPROM1_ET0MAC;
 335                 loc[2] = SSB_SPROM1_ET1MAC;
 336         }
 337         for (i = 0; i < 3; i++) {
 338                 v = in[SPOFF(loc[0]) + i];
 339                 *(((__be16 *)out->il0mac) + i) = cpu_to_be16(v);
 340         }
 341         for (i = 0; i < 3; i++) {
 342                 v = in[SPOFF(loc[1]) + i];
 343                 *(((__be16 *)out->et0mac) + i) = cpu_to_be16(v);
 344         }
 345         for (i = 0; i < 3; i++) {
 346                 v = in[SPOFF(loc[2]) + i];
 347                 *(((__be16 *)out->et1mac) + i) = cpu_to_be16(v);
 348         }
 349         SPEX(et0phyaddr, SSB_SPROM1_ETHPHY, SSB_SPROM1_ETHPHY_ET0A, 0);
 350         SPEX(et1phyaddr, SSB_SPROM1_ETHPHY, SSB_SPROM1_ETHPHY_ET1A,
 351              SSB_SPROM1_ETHPHY_ET1A_SHIFT);
 352         SPEX(et0mdcport, SSB_SPROM1_ETHPHY, SSB_SPROM1_ETHPHY_ET0M, 14);
 353         SPEX(et1mdcport, SSB_SPROM1_ETHPHY, SSB_SPROM1_ETHPHY_ET1M, 15);
 354         SPEX(board_rev, SSB_SPROM1_BINF, SSB_SPROM1_BINF_BREV, 0);
 355         SPEX(country_code, SSB_SPROM1_BINF, SSB_SPROM1_BINF_CCODE,
 356              SSB_SPROM1_BINF_CCODE_SHIFT);
 357         SPEX(ant_available_a, SSB_SPROM1_BINF, SSB_SPROM1_BINF_ANTA,
 358              SSB_SPROM1_BINF_ANTA_SHIFT);
 359         SPEX(ant_available_bg, SSB_SPROM1_BINF, SSB_SPROM1_BINF_ANTBG,
 360              SSB_SPROM1_BINF_ANTBG_SHIFT);
 361         SPEX(pa0b0, SSB_SPROM1_PA0B0, 0xFFFF, 0);
 362         SPEX(pa0b1, SSB_SPROM1_PA0B1, 0xFFFF, 0);
 363         SPEX(pa0b2, SSB_SPROM1_PA0B2, 0xFFFF, 0);
 364         SPEX(pa1b0, SSB_SPROM1_PA1B0, 0xFFFF, 0);
 365         SPEX(pa1b1, SSB_SPROM1_PA1B1, 0xFFFF, 0);
 366         SPEX(pa1b2, SSB_SPROM1_PA1B2, 0xFFFF, 0);
 367         SPEX(gpio0, SSB_SPROM1_GPIOA, SSB_SPROM1_GPIOA_P0, 0);
 368         SPEX(gpio1, SSB_SPROM1_GPIOA, SSB_SPROM1_GPIOA_P1,
 369              SSB_SPROM1_GPIOA_P1_SHIFT);
 370         SPEX(gpio2, SSB_SPROM1_GPIOB, SSB_SPROM1_GPIOB_P2, 0);
 371         SPEX(gpio3, SSB_SPROM1_GPIOB, SSB_SPROM1_GPIOB_P3,
 372              SSB_SPROM1_GPIOB_P3_SHIFT);
 373         SPEX(maxpwr_a, SSB_SPROM1_MAXPWR, SSB_SPROM1_MAXPWR_A,
 374              SSB_SPROM1_MAXPWR_A_SHIFT);
 375         SPEX(maxpwr_bg, SSB_SPROM1_MAXPWR, SSB_SPROM1_MAXPWR_BG, 0);
 376         SPEX(itssi_a, SSB_SPROM1_ITSSI, SSB_SPROM1_ITSSI_A,
 377              SSB_SPROM1_ITSSI_A_SHIFT);
 378         SPEX(itssi_bg, SSB_SPROM1_ITSSI, SSB_SPROM1_ITSSI_BG, 0);
 379         SPEX(boardflags_lo, SSB_SPROM1_BFLLO, 0xFFFF, 0);
 380         if (out->revision >= 2)
 381                 SPEX(boardflags_hi, SSB_SPROM2_BFLHI, 0xFFFF, 0);
 382
 383         /* Extract the antenna gain values. */
 384         gain = r123_extract_antgain(out->revision, in,
 385                                     SSB_SPROM1_AGAIN_BG,
 386                                     SSB_SPROM1_AGAIN_BG_SHIFT);
 387         out->antenna_gain.ghz24.a0 = gain;
 388         out->antenna_gain.ghz24.a1 = gain;
 389         out->antenna_gain.ghz24.a2 = gain;
 390         out->antenna_gain.ghz24.a3 = gain;
 391         gain = r123_extract_antgain(out->revision, in,
 392                                     SSB_SPROM1_AGAIN_A,
 393                                     SSB_SPROM1_AGAIN_A_SHIFT);
 394         out->antenna_gain.ghz5.a0 = gain;
 395         out->antenna_gain.ghz5.a1 = gain;
 396         out->antenna_gain.ghz5.a2 = gain;
 397         out->antenna_gain.ghz5.a3 = gain;
 398 }
 399
 400 static void sprom_extract_r4(struct ssb_sprom *out, const u16 *in)
 401 {
 402         int i;
 403         u16 v;
 404
 405         /* extract the equivalent of the r1 variables */
 406         for (i = 0; i < 3; i++) {
 407                 v = in[SPOFF(SSB_SPROM4_IL0MAC) + i];
 408                 *(((__be16 *)out->il0mac) + i) = cpu_to_be16(v);
 409         }
 410         for (i = 0; i < 3; i++) {
 411                 v = in[SPOFF(SSB_SPROM4_ET0MAC) + i];
 412                 *(((__be16 *)out->et0mac) + i) = cpu_to_be16(v);
 413         }
 414         for (i = 0; i < 3; i++) {
 415                 v = in[SPOFF(SSB_SPROM4_ET1MAC) + i];
 416                 *(((__be16 *)out->et1mac) + i) = cpu_to_be16(v);
 417         }
 418         SPEX(et0phyaddr, SSB_SPROM4_ETHPHY, SSB_SPROM4_ETHPHY_ET0A, 0);
 419         SPEX(et1phyaddr, SSB_SPROM4_ETHPHY, SSB_SPROM4_ETHPHY_ET1A,
 420              SSB_SPROM4_ETHPHY_ET1A_SHIFT);
 421         SPEX(country_code, SSB_SPROM4_CCODE, 0xFFFF, 0);
 422         SPEX(boardflags_lo, SSB_SPROM4_BFLLO, 0xFFFF, 0);
 423         SPEX(boardflags_hi, SSB_SPROM4_BFLHI, 0xFFFF, 0);
 424         SPEX(ant_available_a, SSB_SPROM4_ANTAVAIL, SSB_SPROM4_ANTAVAIL_A,
 425              SSB_SPROM4_ANTAVAIL_A_SHIFT);
 426         SPEX(ant_available_bg, SSB_SPROM4_ANTAVAIL, SSB_SPROM4_ANTAVAIL_BG,
 427              SSB_SPROM4_ANTAVAIL_BG_SHIFT);
 428         SPEX(maxpwr_bg, SSB_SPROM4_MAXP_BG, SSB_SPROM4_MAXP_BG_MASK, 0);
 429         SPEX(itssi_bg, SSB_SPROM4_MAXP_BG, SSB_SPROM4_ITSSI_BG,
 430              SSB_SPROM4_ITSSI_BG_SHIFT);
 431         SPEX(maxpwr_a, SSB_SPROM4_MAXP_A, SSB_SPROM4_MAXP_A_MASK, 0);
 432         SPEX(itssi_a, SSB_SPROM4_MAXP_A, SSB_SPROM4_ITSSI_A,
 433              SSB_SPROM4_ITSSI_A_SHIFT);
 434         SPEX(gpio0, SSB_SPROM4_GPIOA, SSB_SPROM4_GPIOA_P0, 0);
 435         SPEX(gpio1, SSB_SPROM4_GPIOA, SSB_SPROM4_GPIOA_P1,
 436              SSB_SPROM4_GPIOA_P1_SHIFT);
 437         SPEX(gpio2, SSB_SPROM4_GPIOB, SSB_SPROM4_GPIOB_P2, 0);
 438         SPEX(gpio3, SSB_SPROM4_GPIOB, SSB_SPROM4_GPIOB_P3,
 439              SSB_SPROM4_GPIOB_P3_SHIFT);
 440
 441         /* Extract the antenna gain values. */
 442         SPEX(antenna_gain.ghz24.a0, SSB_SPROM4_AGAIN01,
 443              SSB_SPROM4_AGAIN0, SSB_SPROM4_AGAIN0_SHIFT);
 444         SPEX(antenna_gain.ghz24.a1, SSB_SPROM4_AGAIN01,
 445              SSB_SPROM4_AGAIN1, SSB_SPROM4_AGAIN1_SHIFT);
 446         SPEX(antenna_gain.ghz24.a2, SSB_SPROM4_AGAIN23,
 447              SSB_SPROM4_AGAIN2, SSB_SPROM4_AGAIN2_SHIFT);
 448         SPEX(antenna_gain.ghz24.a3, SSB_SPROM4_AGAIN23,
 449              SSB_SPROM4_AGAIN3, SSB_SPROM4_AGAIN3_SHIFT);
 450         memcpy(&out->antenna_gain.ghz5, &out->antenna_gain.ghz24,
 451                sizeof(out->antenna_gain.ghz5));
 452
 453         /* TODO - get remaining rev 4 stuff needed */
 454 }
 455
 456 static int sprom_extract(struct ssb_bus *bus, struct ssb_sprom *out,
 457                          const u16 *in, u16 size)
 458 {
 459         memset(out, 0, sizeof(*out));
 460
 461         out->revision = in[size - 1] & 0x00FF;
 462         ssb_dprintk(KERN_DEBUG PFX "SPROM revision %d detected.\n", out->revision);
 463         if ((bus->chip_id & 0xFF00) == 0x4400) {
 464                 /* Workaround: The BCM44XX chip has a stupid revision
 465                  * number stored in the SPROM.
 466                  * Always extract r1. */
 467                 out->revision = 1;
 468                 sprom_extract_r123(out, in);
 469         } else if (bus->chip_id == 0x4321) {
 470                 /* the BCM4328 has a chipid == 0x4321 and a rev 4 SPROM */
 471                 out->revision = 4;
 472                 sprom_extract_r4(out, in);
 473         } else {
 474                 if (out->revision == 0)
 475                         goto unsupported;
 476                 if (out->revision >= 1 && out->revision <= 3) {
 477                         sprom_extract_r123(out, in);
 478                 }
 479                 if (out->revision == 4)
 480                         sprom_extract_r4(out, in);
 481                 if (out->revision >= 5)
 482                         goto unsupported;
 483         }
 484
 485         return 0;
 486 unsupported:
 487         ssb_printk(KERN_WARNING PFX "Unsupported SPROM revision %d "
 488                    "detected. Will extract v1\n", out->revision);
 489         sprom_extract_r123(out, in);
 490         return 0;
 491 }
 492
 493 static int ssb_pci_sprom_get(struct ssb_bus *bus,
 494                              struct ssb_sprom *sprom)
 495 {
 496         int err = -ENOMEM;
 497         u16 *buf;
 498
 499         buf = kcalloc(SSB_SPROMSIZE_WORDS_R123, sizeof(u16), GFP_KERNEL);
 500         if (!buf)
 501                 goto out;
 502         bus->sprom_size = SSB_SPROMSIZE_WORDS_R123;
 503         sprom_do_read(bus, buf);
 504         err = sprom_check_crc(buf, bus->sprom_size);
 505         if (err) {
 506                 /* check for rev 4 sprom - has special signature */
 507                 if (buf[32] == 0x5372) {
 508                         kfree(buf);
 509                         buf = kcalloc(SSB_SPROMSIZE_WORDS_R4, sizeof(u16),
 510                                       GFP_KERNEL);
 511                         if (!buf)
 512                                 goto out;
 513                         bus->sprom_size = SSB_SPROMSIZE_WORDS_R4;
 514                         sprom_do_read(bus, buf);
 515                         err = sprom_check_crc(buf, bus->sprom_size);
 516                 }
 517                 if (err)
 518                         ssb_printk(KERN_WARNING PFX "WARNING: Invalid"
 519                                    " SPROM CRC (corrupt SPROM)\n");
 520         }
 521         err = sprom_extract(bus, sprom, buf, bus->sprom_size);
 522
 523         kfree(buf);
 524 out:
 525         return err;
 526 }
 527
 528 static void ssb_pci_get_boardinfo(struct ssb_bus *bus,
 529                                   struct ssb_boardinfo *bi)
 530 {
 531         pci_read_config_word(bus->host_pci, PCI_SUBSYSTEM_VENDOR_ID,
 532                              &bi->vendor);
 533         pci_read_config_word(bus->host_pci, PCI_SUBSYSTEM_ID,
 534                              &bi->type);
 535         pci_read_config_word(bus->host_pci, PCI_REVISION_ID,
 536                              &bi->rev);
 537 }
 538
 539 int ssb_pci_get_invariants(struct ssb_bus *bus,
 540                            struct ssb_init_invariants *iv)
 541 {
 542         int err;
 543
 544         err = ssb_pci_sprom_get(bus, &iv->sprom);
 545         if (err)
 546                 goto out;
 547         ssb_pci_get_boardinfo(bus, &iv->boardinfo);
 548
 549 out:
 550         return err;
 551 }
 552
 553 #ifdef CONFIG_SSB_DEBUG
 554 static int ssb_pci_assert_buspower(struct ssb_bus *bus)
 555 {
 556         if (likely(bus->powered_up))
 557                 return 0;
 558
 559         printk(KERN_ERR PFX "FATAL ERROR: Bus powered down "
 560                "while accessing PCI MMIO space\n");
 561         if (bus->power_warn_count <= 10) {
 562                 bus->power_warn_count++;
 563                 dump_stack();
 564         }
 565
 566         return -ENODEV;
 567 }
 568 #else /* DEBUG */
 569 static inline int ssb_pci_assert_buspower(struct ssb_bus *bus)
 570 {
 571         return 0;
 572 }
 573 #endif /* DEBUG */
 574
 575 static u16 ssb_pci_read16(struct ssb_device *dev, u16 offset)
 576 {
 577         struct ssb_bus *bus = dev->bus;
 578
 579         if (unlikely(ssb_pci_assert_buspower(bus)))
 580                 return 0xFFFF;
 581         if (unlikely(bus->mapped_device != dev)) {
 582                 if (unlikely(ssb_pci_switch_core(bus, dev)))
 583                         return 0xFFFF;
 584         }
 585         return ioread16(bus->mmio + offset);
 586 }
 587
 588 static u32 ssb_pci_read32(struct ssb_device *dev, u16 offset)
 589 {
 590         struct ssb_bus *bus = dev->bus;
 591
 592         if (unlikely(ssb_pci_assert_buspower(bus)))
 593                 return 0xFFFFFFFF;
 594         if (unlikely(bus->mapped_device != dev)) {
 595                 if (unlikely(ssb_pci_switch_core(bus, dev)))
 596                         return 0xFFFFFFFF;
 597         }
 598         return ioread32(bus->mmio + offset);
 599 }
 600
 601 static void ssb_pci_write16(struct ssb_device *dev, u16 offset, u16 value)
 602 {
 603         struct ssb_bus *bus = dev->bus;
 604
 605         if (unlikely(ssb_pci_assert_buspower(bus)))
 606                 return;
 607         if (unlikely(bus->mapped_device != dev)) {
 608                 if (unlikely(ssb_pci_switch_core(bus, dev)))
 609                         return;
 610         }
 611         iowrite16(value, bus->mmio + offset);
 612 }
 613
 614 static void ssb_pci_write32(struct ssb_device *dev, u16 offset, u32 value)
 615 {
 616         struct ssb_bus *bus = dev->bus;
 617
 618         if (unlikely(ssb_pci_assert_buspower(bus)))
 619                 return;
 620         if (unlikely(bus->mapped_device != dev)) {
 621                 if (unlikely(ssb_pci_switch_core(bus, dev)))
 622                         return;
 623         }
 624         iowrite32(value, bus->mmio + offset);
 625 }
 626
 627 /* Not "static", as it's used in main.c */
 628 const struct ssb_bus_ops ssb_pci_ops = {
 629         .read16         = ssb_pci_read16,
 630         .read32         = ssb_pci_read32,
 631         .write16        = ssb_pci_write16,
 632         .write32        = ssb_pci_write32,
 633 };
 634
 635 static int sprom2hex(const u16 *sprom, char *buf, size_t buf_len, u16 size)
 636 {
 637         int i, pos = 0;
 638
 639         for (i = 0; i < size; i++)
 640                 pos += snprintf(buf + pos, buf_len - pos - 1,
 641                                 "%04X", swab16(sprom[i]) & 0xFFFF);
 642         pos += snprintf(buf + pos, buf_len - pos - 1, "\n");
 643
 644         return pos + 1;
 645 }
 646
 647 static int hex2sprom(u16 *sprom, const char *dump, size_t len, u16 size)
 648 {
 649         char tmp[5] = { 0 };
 650         int cnt = 0;
 651         unsigned long parsed;
 652
 653         if (len < size * 2)
 654                 return -EINVAL;
 655
 656         while (cnt < size) {
 657                 memcpy(tmp, dump, 4);
 658                 dump += 4;
 659                 parsed = simple_strtoul(tmp, NULL, 16);
 660                 sprom[cnt++] = swab16((u16)parsed);
 661         }
 662
 663         return 0;
 664 }
 665
 666 static ssize_t ssb_pci_attr_sprom_show(struct device *pcidev,
 667                                        struct device_attribute *attr,
 668                                        char *buf)
 669 {
 670         struct pci_dev *pdev = container_of(pcidev, struct pci_dev, dev);
 671         struct ssb_bus *bus;
 672         u16 *sprom;
 673         int err = -ENODEV;
 674         ssize_t count = 0;
 675
 676         bus = ssb_pci_dev_to_bus(pdev);
 677         if (!bus)
 678                 goto out;
 679         err = -ENOMEM;
 680         sprom = kcalloc(bus->sprom_size, sizeof(u16), GFP_KERNEL);
 681         if (!sprom)
 682                 goto out;
 683
 684         /* Use interruptible locking, as the SPROM write might
 685          * be holding the lock for several seconds. So allow userspace
 686          * to cancel operation. */
 687         err = -ERESTARTSYS;
 688         if (mutex_lock_interruptible(&bus->pci_sprom_mutex))
 689                 goto out_kfree;
 690         sprom_do_read(bus, sprom);
 691         mutex_unlock(&bus->pci_sprom_mutex);
 692
 693         count = sprom2hex(sprom, buf, PAGE_SIZE, bus->sprom_size);
 694         err = 0;
 695
 696 out_kfree:
 697         kfree(sprom);
 698 out:
 699         return err ? err : count;
 700 }
 701
 702 static ssize_t ssb_pci_attr_sprom_store(struct device *pcidev,
 703                                         struct device_attribute *attr,
 704                                         const char *buf, size_t count)
 705 {
 706         struct pci_dev *pdev = container_of(pcidev, struct pci_dev, dev);
 707         struct ssb_bus *bus;
 708         u16 *sprom;
 709         int res = 0, err = -ENODEV;
 710
 711         bus = ssb_pci_dev_to_bus(pdev);
 712         if (!bus)
 713                 goto out;
 714         err = -ENOMEM;
 715         sprom = kcalloc(bus->sprom_size, sizeof(u16), GFP_KERNEL);
 716         if (!sprom)
 717                 goto out;
 718         err = hex2sprom(sprom, buf, count, bus->sprom_size);
 719         if (err) {
 720                 err = -EINVAL;
 721                 goto out_kfree;
 722         }
 723         err = sprom_check_crc(sprom, bus->sprom_size);
 724         if (err) {
 725                 err = -EINVAL;
 726                 goto out_kfree;
 727         }
 728
 729         /* Use interruptible locking, as the SPROM write might
 730          * be holding the lock for several seconds. So allow userspace
 731          * to cancel operation. */
 732         err = -ERESTARTSYS;
 733         if (mutex_lock_interruptible(&bus->pci_sprom_mutex))
 734                 goto out_kfree;
 735         err = ssb_devices_freeze(bus);
 736         if (err == -EOPNOTSUPP) {
 737                 ssb_printk(KERN_ERR PFX "SPROM write: Could not freeze devices. "
 738                            "No suspend support. Is CONFIG_PM enabled?\n");
 739                 goto out_unlock;
 740         }
 741         if (err) {
 742                 ssb_printk(KERN_ERR PFX "SPROM write: Could not freeze all devices\n");
 743                 goto out_unlock;
 744         }
 745         res = sprom_do_write(bus, sprom);
 746         err = ssb_devices_thaw(bus);
 747         if (err)
 748                 ssb_printk(KERN_ERR PFX "SPROM write: Could not thaw all devices\n");
 749 out_unlock:
 750         mutex_unlock(&bus->pci_sprom_mutex);
 751 out_kfree:
 752         kfree(sprom);
 753 out:
 754         if (res)
 755                 return res;
 756         return err ? err : count;
 757 }
 758
 759 static DEVICE_ATTR(ssb_sprom, 0600,
 760                    ssb_pci_attr_sprom_show,
 761                    ssb_pci_attr_sprom_store);
 762
 763 void ssb_pci_exit(struct ssb_bus *bus)
 764 {
 765         struct pci_dev *pdev;
 766
 767         if (bus->bustype != SSB_BUSTYPE_PCI)
 768                 return;
 769
 770         pdev = bus->host_pci;
 771         device_remove_file(&pdev->dev, &dev_attr_ssb_sprom);
 772 }
 773
 774 int ssb_pci_init(struct ssb_bus *bus)
 775 {
 776         struct pci_dev *pdev;
 777         int err;
 778
 779         if (bus->bustype != SSB_BUSTYPE_PCI)
 780                 return 0;
 781
 782         pdev = bus->host_pci;
 783         mutex_init(&bus->pci_sprom_mutex);
 784         err = device_create_file(&pdev->dev, &dev_attr_ssb_sprom);
 785         if (err)
 786                 goto out;
 787
 788 out:
 789         return err;
 790 }