2 * (C) Copyright 2008 Intel Corporation
4 * Andy Henroid <andrew.d.henroid@intel.com>
5 * Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
9 * Save DIMM power on Intel 7300-based platforms when all CPUs/cores
10 * are idle, using the DIMM thermal throttling capability.
12 * This driver depends on the Intel integrated DMA controller (I/O AT).
13 * If the driver for I/O AT (drivers/dma/ioatdma*) is also enabled,
14 * this driver should work cooperatively.
19 #include <linux/module.h>
20 #include <linux/pci.h>
21 #include <linux/sched.h>
22 #include <linux/notifier.h>
23 #include <linux/cpumask.h>
24 #include <linux/ktime.h>
25 #include <linux/delay.h>
26 #include <linux/debugfs.h>
27 #include <linux/stop_machine.h>
28 #include <linux/i7300_idle.h>
32 #include "../dma/ioatdma_hw.h"
33 #include "../dma/ioatdma_registers.h"
35 #define I7300_IDLE_DRIVER_VERSION "1.55"
36 #define I7300_PRINT "i7300_idle:"
38 #define MAX_STOP_RETRIES 10
41 module_param_named(debug
, debug
, uint
, 0644);
42 MODULE_PARM_DESC(debug
, "Enable debug printks in this driver");
44 #define dprintk(fmt, arg...) \
45 do { if (debug) printk(KERN_INFO I7300_PRINT fmt, ##arg); } while (0)
48 * Value to set THRTLOW to when initiating throttling
50 * 1 = Throttle when > 4 activations per eval window (Maximum throttling)
51 * 2 = Throttle when > 8 activations
52 * 168 = Throttle when > 672 activations (Minimum throttling)
54 #define MAX_THROTTLE_LOW_LIMIT 168
55 static uint throttle_low_limit
= 1;
56 module_param_named(throttle_low_limit
, throttle_low_limit
, uint
, 0644);
57 MODULE_PARM_DESC(throttle_low_limit
,
58 "Value for THRTLOWLM activation field "
59 "(0 = disable throttle, 1 = Max throttle, 168 = Min throttle)");
62 * simple invocation and duration statistics
64 static unsigned long total_starts
;
65 static unsigned long total_us
;
68 static unsigned long past_skip
;
71 static struct pci_dev
*fbd_dev
;
73 static spinlock_t i7300_idle_lock
;
74 static int i7300_idle_active
;
76 static u8 i7300_idle_thrtctl_saved
;
77 static u8 i7300_idle_thrtlow_saved
;
78 static u32 i7300_idle_mc_saved
;
80 static cpumask_t idle_cpumask
;
81 static ktime_t start_ktime
;
82 static unsigned long avg_idle_us
;
84 static struct dentry
*debugfs_dir
;
86 /* Begin: I/O AT Helper routines */
88 #define IOAT_CHANBASE(ioat_ctl, chan) (ioat_ctl + 0x80 + 0x80 * chan)
89 /* Snoop control (disable snoops when coherency is not important) */
90 #define IOAT_DESC_SADDR_SNP_CTL (1UL << 1)
91 #define IOAT_DESC_DADDR_SNP_CTL (1UL << 2)
93 static struct pci_dev
*ioat_dev
;
94 static struct ioat_dma_descriptor
*ioat_desc
; /* I/O AT desc & data (1 page) */
95 static unsigned long ioat_desc_phys
;
96 static u8
*ioat_iomap
; /* I/O AT memory-mapped control regs (aka CB_BAR) */
97 static u8
*ioat_chanbase
;
99 /* Start I/O AT memory copy */
100 static int i7300_idle_ioat_start(void)
103 /* Clear error (due to circular descriptor pointer) */
104 err
= readl(ioat_chanbase
+ IOAT_CHANERR_OFFSET
);
106 writel(err
, ioat_chanbase
+ IOAT_CHANERR_OFFSET
);
108 writeb(IOAT_CHANCMD_START
, ioat_chanbase
+ IOAT1_CHANCMD_OFFSET
);
112 /* Stop I/O AT memory copy */
113 static void i7300_idle_ioat_stop(void)
118 for (i
= 0; i
< MAX_STOP_RETRIES
; i
++) {
119 writeb(IOAT_CHANCMD_RESET
,
120 ioat_chanbase
+ IOAT1_CHANCMD_OFFSET
);
124 sts
= readq(ioat_chanbase
+ IOAT1_CHANSTS_OFFSET
) &
125 IOAT_CHANSTS_DMA_TRANSFER_STATUS
;
127 if (sts
!= IOAT_CHANSTS_DMA_TRANSFER_STATUS_ACTIVE
)
132 if (i
== MAX_STOP_RETRIES
) {
133 dprintk("failed to stop I/O AT after %d retries\n",
138 /* Test I/O AT by copying 1024 byte from 2k to 1k */
139 static int __init
i7300_idle_ioat_selftest(u8
*ctl
,
140 struct ioat_dma_descriptor
*desc
, unsigned long desc_phys
)
144 memset(desc
, 0, 2048);
145 memset((u8
*) desc
+ 2048, 0xab, 1024);
149 desc
[0].src_addr
= desc_phys
+ 2048;
150 desc
[0].dst_addr
= desc_phys
+ 1024;
153 writeb(IOAT_CHANCMD_RESET
, ioat_chanbase
+ IOAT1_CHANCMD_OFFSET
);
154 writeb(IOAT_CHANCMD_START
, ioat_chanbase
+ IOAT1_CHANCMD_OFFSET
);
158 chan_sts
= readq(ioat_chanbase
+ IOAT1_CHANSTS_OFFSET
) &
159 IOAT_CHANSTS_DMA_TRANSFER_STATUS
;
161 if (chan_sts
!= IOAT_CHANSTS_DMA_TRANSFER_STATUS_DONE
) {
162 /* Not complete, reset the channel */
163 writeb(IOAT_CHANCMD_RESET
,
164 ioat_chanbase
+ IOAT1_CHANCMD_OFFSET
);
168 if (*(u32
*) ((u8
*) desc
+ 3068) != 0xabababab ||
169 *(u32
*) ((u8
*) desc
+ 2044) != 0xabababab) {
170 dprintk("Data values src 0x%x, dest 0x%x, memset 0x%x\n",
171 *(u32
*) ((u8
*) desc
+ 2048),
172 *(u32
*) ((u8
*) desc
+ 1024),
173 *(u32
*) ((u8
*) desc
+ 3072));
179 static struct device dummy_dma_dev
= {
180 .init_name
= "fallback device",
181 .coherent_dma_mask
= DMA_64BIT_MASK
,
182 .dma_mask
= &dummy_dma_dev
.coherent_dma_mask
,
185 /* Setup and initialize I/O AT */
186 /* This driver needs I/O AT as the throttling takes effect only when there is
187 * some memory activity. We use I/O AT to set up a dummy copy, while all CPUs
188 * go idle and memory is throttled.
190 static int __init
i7300_idle_ioat_init(void)
192 u8 ver
, chan_count
, ioat_chan
;
195 ioat_iomap
= (u8
*) ioremap_nocache(pci_resource_start(ioat_dev
, 0),
196 pci_resource_len(ioat_dev
, 0));
199 printk(KERN_ERR I7300_PRINT
"failed to map I/O AT registers\n");
203 ver
= readb(ioat_iomap
+ IOAT_VER_OFFSET
);
204 if (ver
!= IOAT_VER_1_2
) {
205 printk(KERN_ERR I7300_PRINT
"unknown I/O AT version (%u.%u)\n",
206 ver
>> 4, ver
& 0xf);
210 chan_count
= readb(ioat_iomap
+ IOAT_CHANCNT_OFFSET
);
212 printk(KERN_ERR I7300_PRINT
"unexpected # of I/O AT channels "
218 ioat_chan
= chan_count
- 1;
219 ioat_chanbase
= IOAT_CHANBASE(ioat_iomap
, ioat_chan
);
221 chan_ctl
= readw(ioat_chanbase
+ IOAT_CHANCTRL_OFFSET
);
222 if (chan_ctl
& IOAT_CHANCTRL_CHANNEL_IN_USE
) {
223 printk(KERN_ERR I7300_PRINT
"channel %d in use\n", ioat_chan
);
227 writew(IOAT_CHANCTRL_CHANNEL_IN_USE
,
228 ioat_chanbase
+ IOAT_CHANCTRL_OFFSET
);
230 ioat_desc
= (struct ioat_dma_descriptor
*)dma_alloc_coherent(
231 &dummy_dma_dev
, 4096,
232 (dma_addr_t
*)&ioat_desc_phys
, GFP_KERNEL
);
234 printk(KERN_ERR I7300_PRINT
"failed to allocate I/O AT desc\n");
235 goto err_mark_unused
;
238 writel(ioat_desc_phys
& 0xffffffffUL
,
239 ioat_chanbase
+ IOAT1_CHAINADDR_OFFSET_LOW
);
240 writel(ioat_desc_phys
>> 32,
241 ioat_chanbase
+ IOAT1_CHAINADDR_OFFSET_HIGH
);
243 if (i7300_idle_ioat_selftest(ioat_iomap
, ioat_desc
, ioat_desc_phys
)) {
244 printk(KERN_ERR I7300_PRINT
"I/O AT self-test failed\n");
248 /* Setup circular I/O AT descriptor chain */
249 ioat_desc
[0].ctl
= IOAT_DESC_SADDR_SNP_CTL
| IOAT_DESC_DADDR_SNP_CTL
;
250 ioat_desc
[0].src_addr
= ioat_desc_phys
+ 2048;
251 ioat_desc
[0].dst_addr
= ioat_desc_phys
+ 3072;
252 ioat_desc
[0].size
= 128;
253 ioat_desc
[0].next
= ioat_desc_phys
+ sizeof(struct ioat_dma_descriptor
);
255 ioat_desc
[1].ctl
= ioat_desc
[0].ctl
;
256 ioat_desc
[1].src_addr
= ioat_desc
[0].src_addr
;
257 ioat_desc
[1].dst_addr
= ioat_desc
[0].dst_addr
;
258 ioat_desc
[1].size
= ioat_desc
[0].size
;
259 ioat_desc
[1].next
= ioat_desc_phys
;
264 dma_free_coherent(&dummy_dma_dev
, 4096, (void *)ioat_desc
, 0);
266 writew(0, ioat_chanbase
+ IOAT_CHANCTRL_OFFSET
);
274 static void __exit
i7300_idle_ioat_exit(void)
279 i7300_idle_ioat_stop();
281 /* Wait for a while for the channel to halt before releasing */
282 for (i
= 0; i
< MAX_STOP_RETRIES
; i
++) {
283 writeb(IOAT_CHANCMD_RESET
,
284 ioat_chanbase
+ IOAT1_CHANCMD_OFFSET
);
286 chan_sts
= readq(ioat_chanbase
+ IOAT1_CHANSTS_OFFSET
) &
287 IOAT_CHANSTS_DMA_TRANSFER_STATUS
;
289 if (chan_sts
!= IOAT_CHANSTS_DMA_TRANSFER_STATUS_ACTIVE
) {
290 writew(0, ioat_chanbase
+ IOAT_CHANCTRL_OFFSET
);
296 chan_sts
= readq(ioat_chanbase
+ IOAT1_CHANSTS_OFFSET
) &
297 IOAT_CHANSTS_DMA_TRANSFER_STATUS
;
300 * We tried to reset multiple times. If IO A/T channel is still active
301 * flag an error and return without cleanup. Memory leak is better
302 * than random corruption in that extreme error situation.
304 if (chan_sts
== IOAT_CHANSTS_DMA_TRANSFER_STATUS_ACTIVE
) {
305 printk(KERN_ERR I7300_PRINT
"Unable to stop IO A/T channels."
306 " Not freeing resources\n");
310 dma_free_coherent(&dummy_dma_dev
, 4096, (void *)ioat_desc
, 0);
314 /* End: I/O AT Helper routines */
316 #define DIMM_THRTLOW 0x64
317 #define DIMM_THRTCTL 0x67
318 #define DIMM_THRTCTL_THRMHUNT (1UL << 0)
320 #define DIMM_GTW_MODE (1UL << 17)
321 #define DIMM_GBLACT 0x60
324 * Keep track of an exponential-decaying average of recent idle durations.
325 * The latest duration gets DURATION_WEIGHT_PCT percentage weight
326 * in this average, with the old average getting the remaining weight.
328 * High weights emphasize recent history, low weights include long history.
330 #define DURATION_WEIGHT_PCT 55
333 * When the decaying average of recent durations or the predicted duration
334 * of the next timer interrupt is shorter than duration_threshold, the
335 * driver will decline to throttle.
337 #define DURATION_THRESHOLD_US 100
340 /* Store DIMM thermal throttle configuration */
341 static int i7300_idle_thrt_save(void)
346 pci_read_config_byte(fbd_dev
, DIMM_THRTCTL
, &i7300_idle_thrtctl_saved
);
347 pci_read_config_byte(fbd_dev
, DIMM_THRTLOW
, &i7300_idle_thrtlow_saved
);
348 pci_read_config_dword(fbd_dev
, DIMM_MC
, &i7300_idle_mc_saved
);
350 * Make sure we have Global Throttling Window Mode set to have a
351 * "short" window. This (mostly) works around an issue where
352 * throttling persists until the end of the global throttling window
353 * size. On the tested system, this was resulting in a maximum of
354 * 64 ms to exit throttling (average 32 ms). The actual numbers
355 * depends on system frequencies. Setting the short window reduces
356 * this by a factor of 4096.
358 * We will only do this only if the system is set for
359 * unlimited-activations while in open-loop throttling (i.e., when
360 * Global Activation Throttle Limit is zero).
362 pci_read_config_byte(fbd_dev
, DIMM_GBLACT
, &gblactlm
);
363 dprintk("thrtctl_saved = 0x%02x, thrtlow_saved = 0x%02x\n",
364 i7300_idle_thrtctl_saved
,
365 i7300_idle_thrtlow_saved
);
366 dprintk("mc_saved = 0x%08x, gblactlm = 0x%02x\n",
370 new_mc_val
= i7300_idle_mc_saved
| DIMM_GTW_MODE
;
371 pci_write_config_dword(fbd_dev
, DIMM_MC
, new_mc_val
);
374 dprintk("could not set GTW_MODE = 1 (OLTT enabled)\n");
379 /* Restore DIMM thermal throttle configuration */
380 static void i7300_idle_thrt_restore(void)
382 pci_write_config_dword(fbd_dev
, DIMM_MC
, i7300_idle_mc_saved
);
383 pci_write_config_byte(fbd_dev
, DIMM_THRTLOW
, i7300_idle_thrtlow_saved
);
384 pci_write_config_byte(fbd_dev
, DIMM_THRTCTL
, i7300_idle_thrtctl_saved
);
387 /* Enable DIMM thermal throttling */
388 static void i7300_idle_start(void)
393 new_ctl
= i7300_idle_thrtctl_saved
& ~DIMM_THRTCTL_THRMHUNT
;
394 pci_write_config_byte(fbd_dev
, DIMM_THRTCTL
, new_ctl
);
396 limit
= throttle_low_limit
;
397 if (unlikely(limit
> MAX_THROTTLE_LOW_LIMIT
))
398 limit
= MAX_THROTTLE_LOW_LIMIT
;
400 pci_write_config_byte(fbd_dev
, DIMM_THRTLOW
, limit
);
402 new_ctl
= i7300_idle_thrtctl_saved
| DIMM_THRTCTL_THRMHUNT
;
403 pci_write_config_byte(fbd_dev
, DIMM_THRTCTL
, new_ctl
);
406 /* Disable DIMM thermal throttling */
407 static void i7300_idle_stop(void)
412 new_ctl
= i7300_idle_thrtctl_saved
& ~DIMM_THRTCTL_THRMHUNT
;
413 pci_write_config_byte(fbd_dev
, DIMM_THRTCTL
, new_ctl
);
415 pci_write_config_byte(fbd_dev
, DIMM_THRTLOW
, i7300_idle_thrtlow_saved
);
416 pci_write_config_byte(fbd_dev
, DIMM_THRTCTL
, i7300_idle_thrtctl_saved
);
417 pci_read_config_byte(fbd_dev
, DIMM_THRTCTL
, &got_ctl
);
418 WARN_ON_ONCE(got_ctl
!= i7300_idle_thrtctl_saved
);
423 * i7300_avg_duration_check()
424 * return 0 if the decaying average of recent idle durations is
425 * more than DURATION_THRESHOLD_US
427 static int i7300_avg_duration_check(void)
429 if (avg_idle_us
>= DURATION_THRESHOLD_US
)
438 /* Idle notifier to look at idle CPUs */
439 static int i7300_idle_notifier(struct notifier_block
*nb
, unsigned long val
,
444 static ktime_t idle_begin_time
;
445 static int time_init
= 1;
447 if (!throttle_low_limit
)
450 if (unlikely(time_init
)) {
452 idle_begin_time
= ktime_get();
455 spin_lock_irqsave(&i7300_idle_lock
, flags
);
456 if (val
== IDLE_START
) {
458 cpu_set(smp_processor_id(), idle_cpumask
);
460 if (cpus_weight(idle_cpumask
) != num_online_cpus())
463 now_ktime
= ktime_get();
464 idle_begin_time
= now_ktime
;
466 if (i7300_avg_duration_check())
469 i7300_idle_active
= 1;
471 start_ktime
= now_ktime
;
474 i7300_idle_ioat_start();
476 } else if (val
== IDLE_END
) {
477 cpu_clear(smp_processor_id(), idle_cpumask
);
478 if (cpus_weight(idle_cpumask
) == (num_online_cpus() - 1)) {
479 /* First CPU coming out of idle */
480 u64 idle_duration_us
;
482 now_ktime
= ktime_get();
484 idle_duration_us
= ktime_to_us(ktime_sub
485 (now_ktime
, idle_begin_time
));
488 ((100 - DURATION_WEIGHT_PCT
) * avg_idle_us
+
489 DURATION_WEIGHT_PCT
* idle_duration_us
) / 100;
491 if (i7300_idle_active
) {
494 idle_ktime
= ktime_sub(now_ktime
, start_ktime
);
495 total_us
+= ktime_to_us(idle_ktime
);
497 i7300_idle_ioat_stop();
499 i7300_idle_active
= 0;
504 spin_unlock_irqrestore(&i7300_idle_lock
, flags
);
508 static struct notifier_block i7300_idle_nb
= {
509 .notifier_call
= i7300_idle_notifier
,
512 MODULE_DEVICE_TABLE(pci
, pci_tbl
);
514 int stats_open_generic(struct inode
*inode
, struct file
*fp
)
516 fp
->private_data
= inode
->i_private
;
520 static ssize_t
stats_read_ul(struct file
*fp
, char __user
*ubuf
, size_t count
,
523 unsigned long *p
= fp
->private_data
;
527 len
= snprintf(buf
, 32, "%lu\n", *p
);
528 return simple_read_from_buffer(ubuf
, count
, off
, buf
, len
);
531 static const struct file_operations idle_fops
= {
532 .open
= stats_open_generic
,
533 .read
= stats_read_ul
,
536 struct debugfs_file_info
{
540 } debugfs_file_list
[] = {
541 {&total_starts
, "total_starts", NULL
},
542 {&total_us
, "total_us", NULL
},
544 {&past_skip
, "past_skip", NULL
},
549 static int __init
i7300_idle_init(void)
551 spin_lock_init(&i7300_idle_lock
);
552 cpus_clear(idle_cpumask
);
555 if (i7300_idle_platform_probe(&fbd_dev
, &ioat_dev
))
558 if (i7300_idle_thrt_save())
561 if (i7300_idle_ioat_init())
564 debugfs_dir
= debugfs_create_dir("i7300_idle", NULL
);
568 while (debugfs_file_list
[i
].ptr
!= NULL
) {
569 debugfs_file_list
[i
].file
= debugfs_create_file(
570 debugfs_file_list
[i
].name
,
573 debugfs_file_list
[i
].ptr
,
579 idle_notifier_register(&i7300_idle_nb
);
581 printk(KERN_INFO
"i7300_idle: loaded v%s\n", I7300_IDLE_DRIVER_VERSION
);
585 static void __exit
i7300_idle_exit(void)
587 idle_notifier_unregister(&i7300_idle_nb
);
592 while (debugfs_file_list
[i
].file
!= NULL
) {
593 debugfs_remove(debugfs_file_list
[i
].file
);
597 debugfs_remove(debugfs_dir
);
599 i7300_idle_thrt_restore();
600 i7300_idle_ioat_exit();
603 module_init(i7300_idle_init
);
604 module_exit(i7300_idle_exit
);
606 MODULE_AUTHOR("Andy Henroid <andrew.d.henroid@intel.com>");
607 MODULE_DESCRIPTION("Intel Chipset DIMM Idle Power Saving Driver v"
608 I7300_IDLE_DRIVER_VERSION
);
609 MODULE_LICENSE("GPL");