drm/i915: Cleanup trivial leak on execbuffer error path.
[linux-2.6/linux-2.6-openrd.git] / drivers / serial / nwpserial.c
blob32f3eaf0d262942dd2708c59cfe875fb88e69743
1 /*
2 * Serial Port driver for a NWP uart device
4 * Copyright (C) 2008 IBM Corp., Benjamin Krill <ben@codiert.org>
6 * This program is free software; you can redistribute it and/or
7 * modify it under the terms of the GNU General Public License
8 * as published by the Free Software Foundation; either version
9 * 2 of the License, or (at your option) any later version.
12 #include <linux/init.h>
13 #include <linux/console.h>
14 #include <linux/serial.h>
15 #include <linux/serial_reg.h>
16 #include <linux/serial_core.h>
17 #include <linux/tty.h>
18 #include <linux/irqreturn.h>
19 #include <linux/mutex.h>
20 #include <linux/of_platform.h>
21 #include <linux/of_device.h>
22 #include <linux/nwpserial.h>
23 #include <asm/prom.h>
24 #include <asm/dcr.h>
26 #define NWPSERIAL_NR 2
28 #define NWPSERIAL_STATUS_RXVALID 0x1
29 #define NWPSERIAL_STATUS_TXFULL 0x2
31 struct nwpserial_port {
32 struct uart_port port;
33 dcr_host_t dcr_host;
34 unsigned int ier;
35 unsigned int mcr;
38 static DEFINE_MUTEX(nwpserial_mutex);
39 static struct nwpserial_port nwpserial_ports[NWPSERIAL_NR];
41 static void wait_for_bits(struct nwpserial_port *up, int bits)
43 unsigned int status, tmout = 10000;
45 /* Wait up to 10ms for the character(s) to be sent. */
46 do {
47 status = dcr_read(up->dcr_host, UART_LSR);
49 if (--tmout == 0)
50 break;
51 udelay(1);
52 } while ((status & bits) != bits);
55 #ifdef CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL_CONSOLE
56 static void nwpserial_console_putchar(struct uart_port *port, int c)
58 struct nwpserial_port *up;
59 up = container_of(port, struct nwpserial_port, port);
60 /* check if tx buffer is full */
61 wait_for_bits(up, UART_LSR_THRE);
62 dcr_write(up->dcr_host, UART_TX, c);
63 up->port.icount.tx++;
66 static void
67 nwpserial_console_write(struct console *co, const char *s, unsigned int count)
69 struct nwpserial_port *up = &nwpserial_ports[co->index];
70 unsigned long flags;
71 int locked = 1;
73 if (oops_in_progress)
74 locked = spin_trylock_irqsave(&up->port.lock, flags);
75 else
76 spin_lock_irqsave(&up->port.lock, flags);
78 /* save and disable interrupt */
79 up->ier = dcr_read(up->dcr_host, UART_IER);
80 dcr_write(up->dcr_host, UART_IER, up->ier & ~UART_IER_RDI);
82 uart_console_write(&up->port, s, count, nwpserial_console_putchar);
84 /* wait for transmitter to become emtpy */
85 while ((dcr_read(up->dcr_host, UART_LSR) & UART_LSR_THRE) == 0)
86 cpu_relax();
88 /* restore interrupt state */
89 dcr_write(up->dcr_host, UART_IER, up->ier);
91 if (locked)
92 spin_unlock_irqrestore(&up->port.lock, flags);
95 static struct uart_driver nwpserial_reg;
96 static struct console nwpserial_console = {
97 .name = "ttySQ",
98 .write = nwpserial_console_write,
99 .device = uart_console_device,
100 .flags = CON_PRINTBUFFER,
101 .index = -1,
102 .data = &nwpserial_reg,
104 #define NWPSERIAL_CONSOLE (&nwpserial_console)
105 #else
106 #define NWPSERIAL_CONSOLE NULL
107 #endif /* CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL_CONSOLE */
109 /**************************************************************************/
111 static int nwpserial_request_port(struct uart_port *port)
113 return 0;
116 static void nwpserial_release_port(struct uart_port *port)
118 /* N/A */
121 static void nwpserial_config_port(struct uart_port *port, int flags)
123 port->type = PORT_NWPSERIAL;
126 static irqreturn_t nwpserial_interrupt(int irq, void *dev_id)
128 struct nwpserial_port *up = dev_id;
129 struct tty_struct *tty = up->port.info->port.tty;
130 irqreturn_t ret;
131 unsigned int iir;
132 unsigned char ch;
134 spin_lock(&up->port.lock);
136 /* check if the uart was the interrupt source. */
137 iir = dcr_read(up->dcr_host, UART_IIR);
138 if (!iir) {
139 ret = IRQ_NONE;
140 goto out;
143 do {
144 up->port.icount.rx++;
145 ch = dcr_read(up->dcr_host, UART_RX);
146 if (up->port.ignore_status_mask != NWPSERIAL_STATUS_RXVALID)
147 tty_insert_flip_char(tty, ch, TTY_NORMAL);
148 } while (dcr_read(up->dcr_host, UART_RX) & UART_LSR_DR);
150 tty_flip_buffer_push(tty);
151 ret = IRQ_HANDLED;
153 out:
154 spin_unlock(&up->port.lock);
155 return ret;
158 static int nwpserial_startup(struct uart_port *port)
160 struct nwpserial_port *up;
161 int err;
163 up = container_of(port, struct nwpserial_port, port);
165 /* disable flow control by default */
166 up->mcr = dcr_read(up->dcr_host, UART_MCR) & ~UART_MCR_AFE;
167 dcr_write(up->dcr_host, UART_MCR, up->mcr);
169 /* register interrupt handler */
170 err = request_irq(up->port.irq, nwpserial_interrupt,
171 IRQF_SHARED, "nwpserial", up);
172 if (err)
173 return err;
175 /* enable interrupts */
176 up->ier = UART_IER_RDI;
177 dcr_write(up->dcr_host, UART_IER, up->ier);
179 /* enable receiving */
180 up->port.ignore_status_mask &= ~NWPSERIAL_STATUS_RXVALID;
182 return 0;
185 static void nwpserial_shutdown(struct uart_port *port)
187 struct nwpserial_port *up;
188 up = container_of(port, struct nwpserial_port, port);
190 /* disable receiving */
191 up->port.ignore_status_mask |= NWPSERIAL_STATUS_RXVALID;
193 /* disable interrupts from this port */
194 up->ier = 0;
195 dcr_write(up->dcr_host, UART_IER, up->ier);
197 /* free irq */
198 free_irq(up->port.irq, port);
201 static int nwpserial_verify_port(struct uart_port *port,
202 struct serial_struct *ser)
204 return -EINVAL;
207 static const char *nwpserial_type(struct uart_port *port)
209 return port->type == PORT_NWPSERIAL ? "nwpserial" : NULL;
212 static void nwpserial_set_termios(struct uart_port *port,
213 struct ktermios *termios, struct ktermios *old)
215 struct nwpserial_port *up;
216 up = container_of(port, struct nwpserial_port, port);
218 up->port.read_status_mask = NWPSERIAL_STATUS_RXVALID
219 | NWPSERIAL_STATUS_TXFULL;
221 up->port.ignore_status_mask = 0;
222 /* ignore all characters if CREAD is not set */
223 if ((termios->c_cflag & CREAD) == 0)
224 up->port.ignore_status_mask |= NWPSERIAL_STATUS_RXVALID;
226 /* Copy back the old hardware settings */
227 if (old)
228 tty_termios_copy_hw(termios, old);
231 static void nwpserial_break_ctl(struct uart_port *port, int ctl)
233 /* N/A */
236 static void nwpserial_enable_ms(struct uart_port *port)
238 /* N/A */
241 static void nwpserial_stop_rx(struct uart_port *port)
243 struct nwpserial_port *up;
244 up = container_of(port, struct nwpserial_port, port);
245 /* don't forward any more data (like !CREAD) */
246 up->port.ignore_status_mask = NWPSERIAL_STATUS_RXVALID;
249 static void nwpserial_putchar(struct nwpserial_port *up, unsigned char c)
251 /* check if tx buffer is full */
252 wait_for_bits(up, UART_LSR_THRE);
253 dcr_write(up->dcr_host, UART_TX, c);
254 up->port.icount.tx++;
257 static void nwpserial_start_tx(struct uart_port *port)
259 struct nwpserial_port *up;
260 struct circ_buf *xmit;
261 up = container_of(port, struct nwpserial_port, port);
262 xmit = &up->port.info->xmit;
264 if (port->x_char) {
265 nwpserial_putchar(up, up->port.x_char);
266 port->x_char = 0;
269 while (!(uart_circ_empty(xmit) || uart_tx_stopped(&up->port))) {
270 nwpserial_putchar(up, xmit->buf[xmit->tail]);
271 xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE-1);
275 static unsigned int nwpserial_get_mctrl(struct uart_port *port)
277 return 0;
280 static void nwpserial_set_mctrl(struct uart_port *port, unsigned int mctrl)
282 /* N/A */
285 static void nwpserial_stop_tx(struct uart_port *port)
287 /* N/A */
290 static unsigned int nwpserial_tx_empty(struct uart_port *port)
292 struct nwpserial_port *up;
293 unsigned long flags;
294 int ret;
295 up = container_of(port, struct nwpserial_port, port);
297 spin_lock_irqsave(&up->port.lock, flags);
298 ret = dcr_read(up->dcr_host, UART_LSR);
299 spin_unlock_irqrestore(&up->port.lock, flags);
301 return ret & UART_LSR_TEMT ? TIOCSER_TEMT : 0;
304 static struct uart_ops nwpserial_pops = {
305 .tx_empty = nwpserial_tx_empty,
306 .set_mctrl = nwpserial_set_mctrl,
307 .get_mctrl = nwpserial_get_mctrl,
308 .stop_tx = nwpserial_stop_tx,
309 .start_tx = nwpserial_start_tx,
310 .stop_rx = nwpserial_stop_rx,
311 .enable_ms = nwpserial_enable_ms,
312 .break_ctl = nwpserial_break_ctl,
313 .startup = nwpserial_startup,
314 .shutdown = nwpserial_shutdown,
315 .set_termios = nwpserial_set_termios,
316 .type = nwpserial_type,
317 .release_port = nwpserial_release_port,
318 .request_port = nwpserial_request_port,
319 .config_port = nwpserial_config_port,
320 .verify_port = nwpserial_verify_port,
323 static struct uart_driver nwpserial_reg = {
324 .owner = THIS_MODULE,
325 .driver_name = "nwpserial",
326 .dev_name = "ttySQ",
327 .major = TTY_MAJOR,
328 .minor = 68,
329 .nr = NWPSERIAL_NR,
330 .cons = NWPSERIAL_CONSOLE,
333 int nwpserial_register_port(struct uart_port *port)
335 struct nwpserial_port *up = NULL;
336 int ret = -1;
337 int i;
338 static int first = 1;
339 int dcr_len;
340 int dcr_base;
341 struct device_node *dn;
343 mutex_lock(&nwpserial_mutex);
345 dn = to_of_device(port->dev)->node;
346 if (dn == NULL)
347 goto out;
349 /* get dcr base. */
350 dcr_base = dcr_resource_start(dn, 0);
352 /* find matching entry */
353 for (i = 0; i < NWPSERIAL_NR; i++)
354 if (nwpserial_ports[i].port.iobase == dcr_base) {
355 up = &nwpserial_ports[i];
356 break;
359 /* we didn't find a mtching entry, search for a free port */
360 if (up == NULL)
361 for (i = 0; i < NWPSERIAL_NR; i++)
362 if (nwpserial_ports[i].port.type == PORT_UNKNOWN &&
363 nwpserial_ports[i].port.iobase == 0) {
364 up = &nwpserial_ports[i];
365 break;
368 if (up == NULL) {
369 ret = -EBUSY;
370 goto out;
373 if (first)
374 uart_register_driver(&nwpserial_reg);
375 first = 0;
377 up->port.membase = port->membase;
378 up->port.irq = port->irq;
379 up->port.uartclk = port->uartclk;
380 up->port.fifosize = port->fifosize;
381 up->port.regshift = port->regshift;
382 up->port.iotype = port->iotype;
383 up->port.flags = port->flags;
384 up->port.mapbase = port->mapbase;
385 up->port.private_data = port->private_data;
387 if (port->dev)
388 up->port.dev = port->dev;
390 if (up->port.iobase != dcr_base) {
391 up->port.ops = &nwpserial_pops;
392 up->port.fifosize = 16;
394 spin_lock_init(&up->port.lock);
396 up->port.iobase = dcr_base;
397 dcr_len = dcr_resource_len(dn, 0);
399 up->dcr_host = dcr_map(dn, dcr_base, dcr_len);
400 if (!DCR_MAP_OK(up->dcr_host)) {
401 printk(KERN_ERR "Cannot map DCR resources for NWPSERIAL");
402 goto out;
406 ret = uart_add_one_port(&nwpserial_reg, &up->port);
407 if (ret == 0)
408 ret = up->port.line;
410 out:
411 mutex_unlock(&nwpserial_mutex);
413 return ret;
415 EXPORT_SYMBOL(nwpserial_register_port);
417 void nwpserial_unregister_port(int line)
419 struct nwpserial_port *up = &nwpserial_ports[line];
420 mutex_lock(&nwpserial_mutex);
421 uart_remove_one_port(&nwpserial_reg, &up->port);
423 up->port.type = PORT_UNKNOWN;
425 mutex_unlock(&nwpserial_mutex);
427 EXPORT_SYMBOL(nwpserial_unregister_port);
429 #ifdef CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL_CONSOLE
430 static int __init nwpserial_console_init(void)
432 struct nwpserial_port *up = NULL;
433 struct device_node *dn;
434 const char *name;
435 int dcr_base;
436 int dcr_len;
437 int i;
439 /* search for a free port */
440 for (i = 0; i < NWPSERIAL_NR; i++)
441 if (nwpserial_ports[i].port.type == PORT_UNKNOWN) {
442 up = &nwpserial_ports[i];
443 break;
446 if (up == NULL)
447 return -1;
449 name = of_get_property(of_chosen, "linux,stdout-path", NULL);
450 if (name == NULL)
451 return -1;
453 dn = of_find_node_by_path(name);
454 if (!dn)
455 return -1;
457 spin_lock_init(&up->port.lock);
458 up->port.ops = &nwpserial_pops;
459 up->port.type = PORT_NWPSERIAL;
460 up->port.fifosize = 16;
462 dcr_base = dcr_resource_start(dn, 0);
463 dcr_len = dcr_resource_len(dn, 0);
464 up->port.iobase = dcr_base;
466 up->dcr_host = dcr_map(dn, dcr_base, dcr_len);
467 if (!DCR_MAP_OK(up->dcr_host)) {
468 printk("Cannot map DCR resources for SERIAL");
469 return -1;
471 register_console(&nwpserial_console);
472 return 0;
474 console_initcall(nwpserial_console_init);
475 #endif /* CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL_CONSOLE */