2 * SLUB: A slab allocator that limits cache line use instead of queuing
3 * objects in per cpu and per node lists.
5 * The allocator synchronizes using per slab locks and only
6 * uses a centralized lock to manage a pool of partial slabs.
8 * (C) 2007 SGI, Christoph Lameter <clameter@sgi.com>
12 #include <linux/module.h>
13 #include <linux/bit_spinlock.h>
14 #include <linux/interrupt.h>
15 #include <linux/bitops.h>
16 #include <linux/slab.h>
17 #include <linux/seq_file.h>
18 #include <linux/cpu.h>
19 #include <linux/cpuset.h>
20 #include <linux/mempolicy.h>
21 #include <linux/ctype.h>
22 #include <linux/kallsyms.h>
29 * The slab_lock protects operations on the object of a particular
30 * slab and its metadata in the page struct. If the slab lock
31 * has been taken then no allocations nor frees can be performed
32 * on the objects in the slab nor can the slab be added or removed
33 * from the partial or full lists since this would mean modifying
34 * the page_struct of the slab.
36 * The list_lock protects the partial and full list on each node and
37 * the partial slab counter. If taken then no new slabs may be added or
38 * removed from the lists nor make the number of partial slabs be modified.
39 * (Note that the total number of slabs is an atomic value that may be
40 * modified without taking the list lock).
42 * The list_lock is a centralized lock and thus we avoid taking it as
43 * much as possible. As long as SLUB does not have to handle partial
44 * slabs, operations can continue without any centralized lock. F.e.
45 * allocating a long series of objects that fill up slabs does not require
48 * The lock order is sometimes inverted when we are trying to get a slab
49 * off a list. We take the list_lock and then look for a page on the list
50 * to use. While we do that objects in the slabs may be freed. We can
51 * only operate on the slab if we have also taken the slab_lock. So we use
52 * a slab_trylock() on the slab. If trylock was successful then no frees
53 * can occur anymore and we can use the slab for allocations etc. If the
54 * slab_trylock() does not succeed then frees are in progress in the slab and
55 * we must stay away from it for a while since we may cause a bouncing
56 * cacheline if we try to acquire the lock. So go onto the next slab.
57 * If all pages are busy then we may allocate a new slab instead of reusing
58 * a partial slab. A new slab has noone operating on it and thus there is
59 * no danger of cacheline contention.
61 * Interrupts are disabled during allocation and deallocation in order to
62 * make the slab allocator safe to use in the context of an irq. In addition
63 * interrupts are disabled to ensure that the processor does not change
64 * while handling per_cpu slabs, due to kernel preemption.
66 * SLUB assigns one slab for allocation to each processor.
67 * Allocations only occur from these slabs called cpu slabs.
69 * Slabs with free elements are kept on a partial list and during regular
70 * operations no list for full slabs is used. If an object in a full slab is
71 * freed then the slab will show up again on the partial lists.
72 * We track full slabs for debugging purposes though because otherwise we
73 * cannot scan all objects.
75 * Slabs are freed when they become empty. Teardown and setup is
76 * minimal so we rely on the page allocators per cpu caches for
77 * fast frees and allocs.
79 * Overloading of page flags that are otherwise used for LRU management.
81 * PageActive The slab is frozen and exempt from list processing.
82 * This means that the slab is dedicated to a purpose
83 * such as satisfying allocations for a specific
84 * processor. Objects may be freed in the slab while
85 * it is frozen but slab_free will then skip the usual
86 * list operations. It is up to the processor holding
87 * the slab to integrate the slab into the slab lists
88 * when the slab is no longer needed.
90 * One use of this flag is to mark slabs that are
91 * used for allocations. Then such a slab becomes a cpu
92 * slab. The cpu slab may be equipped with an additional
93 * lockless_freelist that allows lockless access to
94 * free objects in addition to the regular freelist
95 * that requires the slab lock.
97 * PageError Slab requires special handling due to debug
98 * options set. This moves slab handling out of
99 * the fast path and disables lockless freelists.
102 #define FROZEN (1 << PG_active)
104 #ifdef CONFIG_SLUB_DEBUG
105 #define SLABDEBUG (1 << PG_error)
110 static inline int SlabFrozen(struct page
*page
)
112 return page
->flags
& FROZEN
;
115 static inline void SetSlabFrozen(struct page
*page
)
117 page
->flags
|= FROZEN
;
120 static inline void ClearSlabFrozen(struct page
*page
)
122 page
->flags
&= ~FROZEN
;
125 static inline int SlabDebug(struct page
*page
)
127 return page
->flags
& SLABDEBUG
;
130 static inline void SetSlabDebug(struct page
*page
)
132 page
->flags
|= SLABDEBUG
;
135 static inline void ClearSlabDebug(struct page
*page
)
137 page
->flags
&= ~SLABDEBUG
;
141 * Issues still to be resolved:
143 * - The per cpu array is updated for each new slab and and is a remote
144 * cacheline for most nodes. This could become a bouncing cacheline given
145 * enough frequent updates. There are 16 pointers in a cacheline, so at
146 * max 16 cpus could compete for the cacheline which may be okay.
148 * - Support PAGE_ALLOC_DEBUG. Should be easy to do.
150 * - Variable sizing of the per node arrays
153 /* Enable to test recovery from slab corruption on boot */
154 #undef SLUB_RESILIENCY_TEST
159 * Small page size. Make sure that we do not fragment memory
161 #define DEFAULT_MAX_ORDER 1
162 #define DEFAULT_MIN_OBJECTS 4
167 * Large page machines are customarily able to handle larger
170 #define DEFAULT_MAX_ORDER 2
171 #define DEFAULT_MIN_OBJECTS 8
176 * Mininum number of partial slabs. These will be left on the partial
177 * lists even if they are empty. kmem_cache_shrink may reclaim them.
179 #define MIN_PARTIAL 2
182 * Maximum number of desirable partial slabs.
183 * The existence of more partial slabs makes kmem_cache_shrink
184 * sort the partial list by the number of objects in the.
186 #define MAX_PARTIAL 10
188 #define DEBUG_DEFAULT_FLAGS (SLAB_DEBUG_FREE | SLAB_RED_ZONE | \
189 SLAB_POISON | SLAB_STORE_USER)
192 * Set of flags that will prevent slab merging
194 #define SLUB_NEVER_MERGE (SLAB_RED_ZONE | SLAB_POISON | SLAB_STORE_USER | \
195 SLAB_TRACE | SLAB_DESTROY_BY_RCU)
197 #define SLUB_MERGE_SAME (SLAB_DEBUG_FREE | SLAB_RECLAIM_ACCOUNT | \
200 #ifndef ARCH_KMALLOC_MINALIGN
201 #define ARCH_KMALLOC_MINALIGN __alignof__(unsigned long long)
204 #ifndef ARCH_SLAB_MINALIGN
205 #define ARCH_SLAB_MINALIGN __alignof__(unsigned long long)
209 * The page->inuse field is 16 bit thus we have this limitation
211 #define MAX_OBJECTS_PER_SLAB 65535
213 /* Internal SLUB flags */
214 #define __OBJECT_POISON 0x80000000 /* Poison object */
215 #define __SYSFS_ADD_DEFERRED 0x40000000 /* Not yet visible via sysfs */
217 /* Not all arches define cache_line_size */
218 #ifndef cache_line_size
219 #define cache_line_size() L1_CACHE_BYTES
222 static int kmem_size
= sizeof(struct kmem_cache
);
225 static struct notifier_block slab_notifier
;
229 DOWN
, /* No slab functionality available */
230 PARTIAL
, /* kmem_cache_open() works but kmalloc does not */
231 UP
, /* Everything works but does not show up in sysfs */
235 /* A list of all slab caches on the system */
236 static DECLARE_RWSEM(slub_lock
);
237 static LIST_HEAD(slab_caches
);
240 * Tracking user of a slab.
243 void *addr
; /* Called from address */
244 int cpu
; /* Was running on cpu */
245 int pid
; /* Pid context */
246 unsigned long when
; /* When did the operation occur */
249 enum track_item
{ TRACK_ALLOC
, TRACK_FREE
};
251 #if defined(CONFIG_SYSFS) && defined(CONFIG_SLUB_DEBUG)
252 static int sysfs_slab_add(struct kmem_cache
*);
253 static int sysfs_slab_alias(struct kmem_cache
*, const char *);
254 static void sysfs_slab_remove(struct kmem_cache
*);
256 static inline int sysfs_slab_add(struct kmem_cache
*s
) { return 0; }
257 static inline int sysfs_slab_alias(struct kmem_cache
*s
, const char *p
)
259 static inline void sysfs_slab_remove(struct kmem_cache
*s
) {}
262 /********************************************************************
263 * Core slab cache functions
264 *******************************************************************/
266 int slab_is_available(void)
268 return slab_state
>= UP
;
271 static inline struct kmem_cache_node
*get_node(struct kmem_cache
*s
, int node
)
274 return s
->node
[node
];
276 return &s
->local_node
;
280 static inline int check_valid_pointer(struct kmem_cache
*s
,
281 struct page
*page
, const void *object
)
288 base
= page_address(page
);
289 if (object
< base
|| object
>= base
+ s
->objects
* s
->size
||
290 (object
- base
) % s
->size
) {
298 * Slow version of get and set free pointer.
300 * This version requires touching the cache lines of kmem_cache which
301 * we avoid to do in the fast alloc free paths. There we obtain the offset
302 * from the page struct.
304 static inline void *get_freepointer(struct kmem_cache
*s
, void *object
)
306 return *(void **)(object
+ s
->offset
);
309 static inline void set_freepointer(struct kmem_cache
*s
, void *object
, void *fp
)
311 *(void **)(object
+ s
->offset
) = fp
;
314 /* Loop over all objects in a slab */
315 #define for_each_object(__p, __s, __addr) \
316 for (__p = (__addr); __p < (__addr) + (__s)->objects * (__s)->size;\
320 #define for_each_free_object(__p, __s, __free) \
321 for (__p = (__free); __p; __p = get_freepointer((__s), __p))
323 /* Determine object index from a given position */
324 static inline int slab_index(void *p
, struct kmem_cache
*s
, void *addr
)
326 return (p
- addr
) / s
->size
;
329 #ifdef CONFIG_SLUB_DEBUG
333 #ifdef CONFIG_SLUB_DEBUG_ON
334 static int slub_debug
= DEBUG_DEFAULT_FLAGS
;
336 static int slub_debug
;
339 static char *slub_debug_slabs
;
344 static void print_section(char *text
, u8
*addr
, unsigned int length
)
352 for (i
= 0; i
< length
; i
++) {
354 printk(KERN_ERR
"%8s 0x%p: ", text
, addr
+ i
);
357 printk(" %02x", addr
[i
]);
359 ascii
[offset
] = isgraph(addr
[i
]) ? addr
[i
] : '.';
361 printk(" %s\n",ascii
);
372 printk(" %s\n", ascii
);
376 static struct track
*get_track(struct kmem_cache
*s
, void *object
,
377 enum track_item alloc
)
382 p
= object
+ s
->offset
+ sizeof(void *);
384 p
= object
+ s
->inuse
;
389 static void set_track(struct kmem_cache
*s
, void *object
,
390 enum track_item alloc
, void *addr
)
395 p
= object
+ s
->offset
+ sizeof(void *);
397 p
= object
+ s
->inuse
;
402 p
->cpu
= smp_processor_id();
403 p
->pid
= current
? current
->pid
: -1;
406 memset(p
, 0, sizeof(struct track
));
409 static void init_tracking(struct kmem_cache
*s
, void *object
)
411 if (!(s
->flags
& SLAB_STORE_USER
))
414 set_track(s
, object
, TRACK_FREE
, NULL
);
415 set_track(s
, object
, TRACK_ALLOC
, NULL
);
418 static void print_track(const char *s
, struct track
*t
)
423 printk(KERN_ERR
"INFO: %s in ", s
);
424 __print_symbol("%s", (unsigned long)t
->addr
);
425 printk(" age=%lu cpu=%u pid=%d\n", jiffies
- t
->when
, t
->cpu
, t
->pid
);
428 static void print_tracking(struct kmem_cache
*s
, void *object
)
430 if (!(s
->flags
& SLAB_STORE_USER
))
433 print_track("Allocated", get_track(s
, object
, TRACK_ALLOC
));
434 print_track("Freed", get_track(s
, object
, TRACK_FREE
));
437 static void print_page_info(struct page
*page
)
439 printk(KERN_ERR
"INFO: Slab 0x%p used=%u fp=0x%p flags=0x%04lx\n",
440 page
, page
->inuse
, page
->freelist
, page
->flags
);
444 static void slab_bug(struct kmem_cache
*s
, char *fmt
, ...)
450 vsnprintf(buf
, sizeof(buf
), fmt
, args
);
452 printk(KERN_ERR
"========================================"
453 "=====================================\n");
454 printk(KERN_ERR
"BUG %s: %s\n", s
->name
, buf
);
455 printk(KERN_ERR
"----------------------------------------"
456 "-------------------------------------\n\n");
459 static void slab_fix(struct kmem_cache
*s
, char *fmt
, ...)
465 vsnprintf(buf
, sizeof(buf
), fmt
, args
);
467 printk(KERN_ERR
"FIX %s: %s\n", s
->name
, buf
);
470 static void print_trailer(struct kmem_cache
*s
, struct page
*page
, u8
*p
)
472 unsigned int off
; /* Offset of last byte */
473 u8
*addr
= page_address(page
);
475 print_tracking(s
, p
);
477 print_page_info(page
);
479 printk(KERN_ERR
"INFO: Object 0x%p @offset=%tu fp=0x%p\n\n",
480 p
, p
- addr
, get_freepointer(s
, p
));
483 print_section("Bytes b4", p
- 16, 16);
485 print_section("Object", p
, min(s
->objsize
, 128));
487 if (s
->flags
& SLAB_RED_ZONE
)
488 print_section("Redzone", p
+ s
->objsize
,
489 s
->inuse
- s
->objsize
);
492 off
= s
->offset
+ sizeof(void *);
496 if (s
->flags
& SLAB_STORE_USER
)
497 off
+= 2 * sizeof(struct track
);
500 /* Beginning of the filler is the free pointer */
501 print_section("Padding", p
+ off
, s
->size
- off
);
506 static void object_err(struct kmem_cache
*s
, struct page
*page
,
507 u8
*object
, char *reason
)
510 print_trailer(s
, page
, object
);
513 static void slab_err(struct kmem_cache
*s
, struct page
*page
, char *fmt
, ...)
519 vsnprintf(buf
, sizeof(buf
), fmt
, args
);
522 print_page_info(page
);
526 static void init_object(struct kmem_cache
*s
, void *object
, int active
)
530 if (s
->flags
& __OBJECT_POISON
) {
531 memset(p
, POISON_FREE
, s
->objsize
- 1);
532 p
[s
->objsize
-1] = POISON_END
;
535 if (s
->flags
& SLAB_RED_ZONE
)
536 memset(p
+ s
->objsize
,
537 active
? SLUB_RED_ACTIVE
: SLUB_RED_INACTIVE
,
538 s
->inuse
- s
->objsize
);
541 static u8
*check_bytes(u8
*start
, unsigned int value
, unsigned int bytes
)
544 if (*start
!= (u8
)value
)
552 static void restore_bytes(struct kmem_cache
*s
, char *message
, u8 data
,
553 void *from
, void *to
)
555 slab_fix(s
, "Restoring 0x%p-0x%p=0x%x\n", from
, to
- 1, data
);
556 memset(from
, data
, to
- from
);
559 static int check_bytes_and_report(struct kmem_cache
*s
, struct page
*page
,
560 u8
*object
, char *what
,
561 u8
* start
, unsigned int value
, unsigned int bytes
)
566 fault
= check_bytes(start
, value
, bytes
);
571 while (end
> fault
&& end
[-1] == value
)
574 slab_bug(s
, "%s overwritten", what
);
575 printk(KERN_ERR
"INFO: 0x%p-0x%p. First byte 0x%x instead of 0x%x\n",
576 fault
, end
- 1, fault
[0], value
);
577 print_trailer(s
, page
, object
);
579 restore_bytes(s
, what
, value
, fault
, end
);
587 * Bytes of the object to be managed.
588 * If the freepointer may overlay the object then the free
589 * pointer is the first word of the object.
591 * Poisoning uses 0x6b (POISON_FREE) and the last byte is
594 * object + s->objsize
595 * Padding to reach word boundary. This is also used for Redzoning.
596 * Padding is extended by another word if Redzoning is enabled and
599 * We fill with 0xbb (RED_INACTIVE) for inactive objects and with
600 * 0xcc (RED_ACTIVE) for objects in use.
603 * Meta data starts here.
605 * A. Free pointer (if we cannot overwrite object on free)
606 * B. Tracking data for SLAB_STORE_USER
607 * C. Padding to reach required alignment boundary or at mininum
608 * one word if debuggin is on to be able to detect writes
609 * before the word boundary.
611 * Padding is done using 0x5a (POISON_INUSE)
614 * Nothing is used beyond s->size.
616 * If slabcaches are merged then the objsize and inuse boundaries are mostly
617 * ignored. And therefore no slab options that rely on these boundaries
618 * may be used with merged slabcaches.
621 static int check_pad_bytes(struct kmem_cache
*s
, struct page
*page
, u8
*p
)
623 unsigned long off
= s
->inuse
; /* The end of info */
626 /* Freepointer is placed after the object. */
627 off
+= sizeof(void *);
629 if (s
->flags
& SLAB_STORE_USER
)
630 /* We also have user information there */
631 off
+= 2 * sizeof(struct track
);
636 return check_bytes_and_report(s
, page
, p
, "Object padding",
637 p
+ off
, POISON_INUSE
, s
->size
- off
);
640 static int slab_pad_check(struct kmem_cache
*s
, struct page
*page
)
648 if (!(s
->flags
& SLAB_POISON
))
651 start
= page_address(page
);
652 end
= start
+ (PAGE_SIZE
<< s
->order
);
653 length
= s
->objects
* s
->size
;
654 remainder
= end
- (start
+ length
);
658 fault
= check_bytes(start
+ length
, POISON_INUSE
, remainder
);
661 while (end
> fault
&& end
[-1] == POISON_INUSE
)
664 slab_err(s
, page
, "Padding overwritten. 0x%p-0x%p", fault
, end
- 1);
665 print_section("Padding", start
, length
);
667 restore_bytes(s
, "slab padding", POISON_INUSE
, start
, end
);
671 static int check_object(struct kmem_cache
*s
, struct page
*page
,
672 void *object
, int active
)
675 u8
*endobject
= object
+ s
->objsize
;
677 if (s
->flags
& SLAB_RED_ZONE
) {
679 active
? SLUB_RED_ACTIVE
: SLUB_RED_INACTIVE
;
681 if (!check_bytes_and_report(s
, page
, object
, "Redzone",
682 endobject
, red
, s
->inuse
- s
->objsize
))
685 if ((s
->flags
& SLAB_POISON
) && s
->objsize
< s
->inuse
)
686 check_bytes_and_report(s
, page
, p
, "Alignment padding", endobject
,
687 POISON_INUSE
, s
->inuse
- s
->objsize
);
690 if (s
->flags
& SLAB_POISON
) {
691 if (!active
&& (s
->flags
& __OBJECT_POISON
) &&
692 (!check_bytes_and_report(s
, page
, p
, "Poison", p
,
693 POISON_FREE
, s
->objsize
- 1) ||
694 !check_bytes_and_report(s
, page
, p
, "Poison",
695 p
+ s
->objsize
-1, POISON_END
, 1)))
698 * check_pad_bytes cleans up on its own.
700 check_pad_bytes(s
, page
, p
);
703 if (!s
->offset
&& active
)
705 * Object and freepointer overlap. Cannot check
706 * freepointer while object is allocated.
710 /* Check free pointer validity */
711 if (!check_valid_pointer(s
, page
, get_freepointer(s
, p
))) {
712 object_err(s
, page
, p
, "Freepointer corrupt");
714 * No choice but to zap it and thus loose the remainder
715 * of the free objects in this slab. May cause
716 * another error because the object count is now wrong.
718 set_freepointer(s
, p
, NULL
);
724 static int check_slab(struct kmem_cache
*s
, struct page
*page
)
726 VM_BUG_ON(!irqs_disabled());
728 if (!PageSlab(page
)) {
729 slab_err(s
, page
, "Not a valid slab page");
732 if (page
->offset
* sizeof(void *) != s
->offset
) {
733 slab_err(s
, page
, "Corrupted offset %lu",
734 (unsigned long)(page
->offset
* sizeof(void *)));
737 if (page
->inuse
> s
->objects
) {
738 slab_err(s
, page
, "inuse %u > max %u",
739 s
->name
, page
->inuse
, s
->objects
);
742 /* Slab_pad_check fixes things up after itself */
743 slab_pad_check(s
, page
);
748 * Determine if a certain object on a page is on the freelist. Must hold the
749 * slab lock to guarantee that the chains are in a consistent state.
751 static int on_freelist(struct kmem_cache
*s
, struct page
*page
, void *search
)
754 void *fp
= page
->freelist
;
757 while (fp
&& nr
<= s
->objects
) {
760 if (!check_valid_pointer(s
, page
, fp
)) {
762 object_err(s
, page
, object
,
763 "Freechain corrupt");
764 set_freepointer(s
, object
, NULL
);
767 slab_err(s
, page
, "Freepointer corrupt");
768 page
->freelist
= NULL
;
769 page
->inuse
= s
->objects
;
770 slab_fix(s
, "Freelist cleared");
776 fp
= get_freepointer(s
, object
);
780 if (page
->inuse
!= s
->objects
- nr
) {
781 slab_err(s
, page
, "Wrong object count. Counter is %d but "
782 "counted were %d", page
->inuse
, s
->objects
- nr
);
783 page
->inuse
= s
->objects
- nr
;
784 slab_fix(s
, "Object count adjusted.");
786 return search
== NULL
;
789 static void trace(struct kmem_cache
*s
, struct page
*page
, void *object
, int alloc
)
791 if (s
->flags
& SLAB_TRACE
) {
792 printk(KERN_INFO
"TRACE %s %s 0x%p inuse=%d fp=0x%p\n",
794 alloc
? "alloc" : "free",
799 print_section("Object", (void *)object
, s
->objsize
);
806 * Tracking of fully allocated slabs for debugging purposes.
808 static void add_full(struct kmem_cache_node
*n
, struct page
*page
)
810 spin_lock(&n
->list_lock
);
811 list_add(&page
->lru
, &n
->full
);
812 spin_unlock(&n
->list_lock
);
815 static void remove_full(struct kmem_cache
*s
, struct page
*page
)
817 struct kmem_cache_node
*n
;
819 if (!(s
->flags
& SLAB_STORE_USER
))
822 n
= get_node(s
, page_to_nid(page
));
824 spin_lock(&n
->list_lock
);
825 list_del(&page
->lru
);
826 spin_unlock(&n
->list_lock
);
829 static void setup_object_debug(struct kmem_cache
*s
, struct page
*page
,
832 if (!(s
->flags
& (SLAB_STORE_USER
|SLAB_RED_ZONE
|__OBJECT_POISON
)))
835 init_object(s
, object
, 0);
836 init_tracking(s
, object
);
839 static int alloc_debug_processing(struct kmem_cache
*s
, struct page
*page
,
840 void *object
, void *addr
)
842 if (!check_slab(s
, page
))
845 if (object
&& !on_freelist(s
, page
, object
)) {
846 object_err(s
, page
, object
, "Object already allocated");
850 if (!check_valid_pointer(s
, page
, object
)) {
851 object_err(s
, page
, object
, "Freelist Pointer check fails");
855 if (object
&& !check_object(s
, page
, object
, 0))
858 /* Success perform special debug activities for allocs */
859 if (s
->flags
& SLAB_STORE_USER
)
860 set_track(s
, object
, TRACK_ALLOC
, addr
);
861 trace(s
, page
, object
, 1);
862 init_object(s
, object
, 1);
866 if (PageSlab(page
)) {
868 * If this is a slab page then lets do the best we can
869 * to avoid issues in the future. Marking all objects
870 * as used avoids touching the remaining objects.
872 slab_fix(s
, "Marking all objects used");
873 page
->inuse
= s
->objects
;
874 page
->freelist
= NULL
;
875 /* Fix up fields that may be corrupted */
876 page
->offset
= s
->offset
/ sizeof(void *);
881 static int free_debug_processing(struct kmem_cache
*s
, struct page
*page
,
882 void *object
, void *addr
)
884 if (!check_slab(s
, page
))
887 if (!check_valid_pointer(s
, page
, object
)) {
888 slab_err(s
, page
, "Invalid object pointer 0x%p", object
);
892 if (on_freelist(s
, page
, object
)) {
893 object_err(s
, page
, object
, "Object already free");
897 if (!check_object(s
, page
, object
, 1))
900 if (unlikely(s
!= page
->slab
)) {
902 slab_err(s
, page
, "Attempt to free object(0x%p) "
903 "outside of slab", object
);
907 "SLUB <none>: no slab for object 0x%p.\n",
912 object_err(s
, page
, object
,
913 "page slab pointer corrupt.");
917 /* Special debug activities for freeing objects */
918 if (!SlabFrozen(page
) && !page
->freelist
)
919 remove_full(s
, page
);
920 if (s
->flags
& SLAB_STORE_USER
)
921 set_track(s
, object
, TRACK_FREE
, addr
);
922 trace(s
, page
, object
, 0);
923 init_object(s
, object
, 0);
927 slab_fix(s
, "Object at 0x%p not freed", object
);
931 static int __init
setup_slub_debug(char *str
)
933 slub_debug
= DEBUG_DEFAULT_FLAGS
;
934 if (*str
++ != '=' || !*str
)
936 * No options specified. Switch on full debugging.
942 * No options but restriction on slabs. This means full
943 * debugging for slabs matching a pattern.
950 * Switch off all debugging measures.
955 * Determine which debug features should be switched on
957 for ( ;*str
&& *str
!= ','; str
++) {
958 switch (tolower(*str
)) {
960 slub_debug
|= SLAB_DEBUG_FREE
;
963 slub_debug
|= SLAB_RED_ZONE
;
966 slub_debug
|= SLAB_POISON
;
969 slub_debug
|= SLAB_STORE_USER
;
972 slub_debug
|= SLAB_TRACE
;
975 printk(KERN_ERR
"slub_debug option '%c' "
976 "unknown. skipped\n",*str
);
982 slub_debug_slabs
= str
+ 1;
987 __setup("slub_debug", setup_slub_debug
);
989 static void kmem_cache_open_debug_check(struct kmem_cache
*s
)
992 * The page->offset field is only 16 bit wide. This is an offset
993 * in units of words from the beginning of an object. If the slab
994 * size is bigger then we cannot move the free pointer behind the
997 * On 32 bit platforms the limit is 256k. On 64bit platforms
1000 * Debugging or ctor may create a need to move the free
1001 * pointer. Fail if this happens.
1003 if (s
->objsize
>= 65535 * sizeof(void *)) {
1004 BUG_ON(s
->flags
& (SLAB_RED_ZONE
| SLAB_POISON
|
1005 SLAB_STORE_USER
| SLAB_DESTROY_BY_RCU
));
1010 * Enable debugging if selected on the kernel commandline.
1012 if (slub_debug
&& (!slub_debug_slabs
||
1013 strncmp(slub_debug_slabs
, s
->name
,
1014 strlen(slub_debug_slabs
)) == 0))
1015 s
->flags
|= slub_debug
;
1018 static inline void setup_object_debug(struct kmem_cache
*s
,
1019 struct page
*page
, void *object
) {}
1021 static inline int alloc_debug_processing(struct kmem_cache
*s
,
1022 struct page
*page
, void *object
, void *addr
) { return 0; }
1024 static inline int free_debug_processing(struct kmem_cache
*s
,
1025 struct page
*page
, void *object
, void *addr
) { return 0; }
1027 static inline int slab_pad_check(struct kmem_cache
*s
, struct page
*page
)
1029 static inline int check_object(struct kmem_cache
*s
, struct page
*page
,
1030 void *object
, int active
) { return 1; }
1031 static inline void add_full(struct kmem_cache_node
*n
, struct page
*page
) {}
1032 static inline void kmem_cache_open_debug_check(struct kmem_cache
*s
) {}
1033 #define slub_debug 0
1036 * Slab allocation and freeing
1038 static struct page
*allocate_slab(struct kmem_cache
*s
, gfp_t flags
, int node
)
1041 int pages
= 1 << s
->order
;
1044 flags
|= __GFP_COMP
;
1046 if (s
->flags
& SLAB_CACHE_DMA
)
1050 page
= alloc_pages(flags
, s
->order
);
1052 page
= alloc_pages_node(node
, flags
, s
->order
);
1057 mod_zone_page_state(page_zone(page
),
1058 (s
->flags
& SLAB_RECLAIM_ACCOUNT
) ?
1059 NR_SLAB_RECLAIMABLE
: NR_SLAB_UNRECLAIMABLE
,
1065 static void setup_object(struct kmem_cache
*s
, struct page
*page
,
1068 setup_object_debug(s
, page
, object
);
1069 if (unlikely(s
->ctor
))
1070 s
->ctor(object
, s
, 0);
1073 static struct page
*new_slab(struct kmem_cache
*s
, gfp_t flags
, int node
)
1076 struct kmem_cache_node
*n
;
1082 BUG_ON(flags
& ~(GFP_DMA
| __GFP_ZERO
| GFP_LEVEL_MASK
));
1084 if (flags
& __GFP_WAIT
)
1087 page
= allocate_slab(s
, flags
& GFP_LEVEL_MASK
, node
);
1091 n
= get_node(s
, page_to_nid(page
));
1093 atomic_long_inc(&n
->nr_slabs
);
1094 page
->offset
= s
->offset
/ sizeof(void *);
1096 page
->flags
|= 1 << PG_slab
;
1097 if (s
->flags
& (SLAB_DEBUG_FREE
| SLAB_RED_ZONE
| SLAB_POISON
|
1098 SLAB_STORE_USER
| SLAB_TRACE
))
1101 start
= page_address(page
);
1102 end
= start
+ s
->objects
* s
->size
;
1104 if (unlikely(s
->flags
& SLAB_POISON
))
1105 memset(start
, POISON_INUSE
, PAGE_SIZE
<< s
->order
);
1108 for_each_object(p
, s
, start
) {
1109 setup_object(s
, page
, last
);
1110 set_freepointer(s
, last
, p
);
1113 setup_object(s
, page
, last
);
1114 set_freepointer(s
, last
, NULL
);
1116 page
->freelist
= start
;
1117 page
->lockless_freelist
= NULL
;
1120 if (flags
& __GFP_WAIT
)
1121 local_irq_disable();
1125 static void __free_slab(struct kmem_cache
*s
, struct page
*page
)
1127 int pages
= 1 << s
->order
;
1129 if (unlikely(SlabDebug(page
))) {
1132 slab_pad_check(s
, page
);
1133 for_each_object(p
, s
, page_address(page
))
1134 check_object(s
, page
, p
, 0);
1135 ClearSlabDebug(page
);
1138 mod_zone_page_state(page_zone(page
),
1139 (s
->flags
& SLAB_RECLAIM_ACCOUNT
) ?
1140 NR_SLAB_RECLAIMABLE
: NR_SLAB_UNRECLAIMABLE
,
1143 page
->mapping
= NULL
;
1144 __free_pages(page
, s
->order
);
1147 static void rcu_free_slab(struct rcu_head
*h
)
1151 page
= container_of((struct list_head
*)h
, struct page
, lru
);
1152 __free_slab(page
->slab
, page
);
1155 static void free_slab(struct kmem_cache
*s
, struct page
*page
)
1157 if (unlikely(s
->flags
& SLAB_DESTROY_BY_RCU
)) {
1159 * RCU free overloads the RCU head over the LRU
1161 struct rcu_head
*head
= (void *)&page
->lru
;
1163 call_rcu(head
, rcu_free_slab
);
1165 __free_slab(s
, page
);
1168 static void discard_slab(struct kmem_cache
*s
, struct page
*page
)
1170 struct kmem_cache_node
*n
= get_node(s
, page_to_nid(page
));
1172 atomic_long_dec(&n
->nr_slabs
);
1173 reset_page_mapcount(page
);
1174 __ClearPageSlab(page
);
1179 * Per slab locking using the pagelock
1181 static __always_inline
void slab_lock(struct page
*page
)
1183 bit_spin_lock(PG_locked
, &page
->flags
);
1186 static __always_inline
void slab_unlock(struct page
*page
)
1188 bit_spin_unlock(PG_locked
, &page
->flags
);
1191 static __always_inline
int slab_trylock(struct page
*page
)
1195 rc
= bit_spin_trylock(PG_locked
, &page
->flags
);
1200 * Management of partially allocated slabs
1202 static void add_partial_tail(struct kmem_cache_node
*n
, struct page
*page
)
1204 spin_lock(&n
->list_lock
);
1206 list_add_tail(&page
->lru
, &n
->partial
);
1207 spin_unlock(&n
->list_lock
);
1210 static void add_partial(struct kmem_cache_node
*n
, struct page
*page
)
1212 spin_lock(&n
->list_lock
);
1214 list_add(&page
->lru
, &n
->partial
);
1215 spin_unlock(&n
->list_lock
);
1218 static void remove_partial(struct kmem_cache
*s
,
1221 struct kmem_cache_node
*n
= get_node(s
, page_to_nid(page
));
1223 spin_lock(&n
->list_lock
);
1224 list_del(&page
->lru
);
1226 spin_unlock(&n
->list_lock
);
1230 * Lock slab and remove from the partial list.
1232 * Must hold list_lock.
1234 static inline int lock_and_freeze_slab(struct kmem_cache_node
*n
, struct page
*page
)
1236 if (slab_trylock(page
)) {
1237 list_del(&page
->lru
);
1239 SetSlabFrozen(page
);
1246 * Try to allocate a partial slab from a specific node.
1248 static struct page
*get_partial_node(struct kmem_cache_node
*n
)
1253 * Racy check. If we mistakenly see no partial slabs then we
1254 * just allocate an empty slab. If we mistakenly try to get a
1255 * partial slab and there is none available then get_partials()
1258 if (!n
|| !n
->nr_partial
)
1261 spin_lock(&n
->list_lock
);
1262 list_for_each_entry(page
, &n
->partial
, lru
)
1263 if (lock_and_freeze_slab(n
, page
))
1267 spin_unlock(&n
->list_lock
);
1272 * Get a page from somewhere. Search in increasing NUMA distances.
1274 static struct page
*get_any_partial(struct kmem_cache
*s
, gfp_t flags
)
1277 struct zonelist
*zonelist
;
1282 * The defrag ratio allows a configuration of the tradeoffs between
1283 * inter node defragmentation and node local allocations. A lower
1284 * defrag_ratio increases the tendency to do local allocations
1285 * instead of attempting to obtain partial slabs from other nodes.
1287 * If the defrag_ratio is set to 0 then kmalloc() always
1288 * returns node local objects. If the ratio is higher then kmalloc()
1289 * may return off node objects because partial slabs are obtained
1290 * from other nodes and filled up.
1292 * If /sys/slab/xx/defrag_ratio is set to 100 (which makes
1293 * defrag_ratio = 1000) then every (well almost) allocation will
1294 * first attempt to defrag slab caches on other nodes. This means
1295 * scanning over all nodes to look for partial slabs which may be
1296 * expensive if we do it every time we are trying to find a slab
1297 * with available objects.
1299 if (!s
->defrag_ratio
|| get_cycles() % 1024 > s
->defrag_ratio
)
1302 zonelist
= &NODE_DATA(slab_node(current
->mempolicy
))
1303 ->node_zonelists
[gfp_zone(flags
)];
1304 for (z
= zonelist
->zones
; *z
; z
++) {
1305 struct kmem_cache_node
*n
;
1307 n
= get_node(s
, zone_to_nid(*z
));
1309 if (n
&& cpuset_zone_allowed_hardwall(*z
, flags
) &&
1310 n
->nr_partial
> MIN_PARTIAL
) {
1311 page
= get_partial_node(n
);
1321 * Get a partial page, lock it and return it.
1323 static struct page
*get_partial(struct kmem_cache
*s
, gfp_t flags
, int node
)
1326 int searchnode
= (node
== -1) ? numa_node_id() : node
;
1328 page
= get_partial_node(get_node(s
, searchnode
));
1329 if (page
|| (flags
& __GFP_THISNODE
))
1332 return get_any_partial(s
, flags
);
1336 * Move a page back to the lists.
1338 * Must be called with the slab lock held.
1340 * On exit the slab lock will have been dropped.
1342 static void unfreeze_slab(struct kmem_cache
*s
, struct page
*page
)
1344 struct kmem_cache_node
*n
= get_node(s
, page_to_nid(page
));
1346 ClearSlabFrozen(page
);
1350 add_partial(n
, page
);
1351 else if (SlabDebug(page
) && (s
->flags
& SLAB_STORE_USER
))
1356 if (n
->nr_partial
< MIN_PARTIAL
) {
1358 * Adding an empty slab to the partial slabs in order
1359 * to avoid page allocator overhead. This slab needs
1360 * to come after the other slabs with objects in
1361 * order to fill them up. That way the size of the
1362 * partial list stays small. kmem_cache_shrink can
1363 * reclaim empty slabs from the partial list.
1365 add_partial_tail(n
, page
);
1369 discard_slab(s
, page
);
1375 * Remove the cpu slab
1377 static void deactivate_slab(struct kmem_cache
*s
, struct page
*page
, int cpu
)
1380 * Merge cpu freelist into freelist. Typically we get here
1381 * because both freelists are empty. So this is unlikely
1384 while (unlikely(page
->lockless_freelist
)) {
1387 /* Retrieve object from cpu_freelist */
1388 object
= page
->lockless_freelist
;
1389 page
->lockless_freelist
= page
->lockless_freelist
[page
->offset
];
1391 /* And put onto the regular freelist */
1392 object
[page
->offset
] = page
->freelist
;
1393 page
->freelist
= object
;
1396 s
->cpu_slab
[cpu
] = NULL
;
1397 unfreeze_slab(s
, page
);
1400 static inline void flush_slab(struct kmem_cache
*s
, struct page
*page
, int cpu
)
1403 deactivate_slab(s
, page
, cpu
);
1408 * Called from IPI handler with interrupts disabled.
1410 static inline void __flush_cpu_slab(struct kmem_cache
*s
, int cpu
)
1412 struct page
*page
= s
->cpu_slab
[cpu
];
1415 flush_slab(s
, page
, cpu
);
1418 static void flush_cpu_slab(void *d
)
1420 struct kmem_cache
*s
= d
;
1421 int cpu
= smp_processor_id();
1423 __flush_cpu_slab(s
, cpu
);
1426 static void flush_all(struct kmem_cache
*s
)
1429 on_each_cpu(flush_cpu_slab
, s
, 1, 1);
1431 unsigned long flags
;
1433 local_irq_save(flags
);
1435 local_irq_restore(flags
);
1440 * Slow path. The lockless freelist is empty or we need to perform
1443 * Interrupts are disabled.
1445 * Processing is still very fast if new objects have been freed to the
1446 * regular freelist. In that case we simply take over the regular freelist
1447 * as the lockless freelist and zap the regular freelist.
1449 * If that is not working then we fall back to the partial lists. We take the
1450 * first element of the freelist as the object to allocate now and move the
1451 * rest of the freelist to the lockless freelist.
1453 * And if we were unable to get a new slab from the partial slab lists then
1454 * we need to allocate a new slab. This is slowest path since we may sleep.
1456 static void *__slab_alloc(struct kmem_cache
*s
,
1457 gfp_t gfpflags
, int node
, void *addr
, struct page
*page
)
1460 int cpu
= smp_processor_id();
1466 if (unlikely(node
!= -1 && page_to_nid(page
) != node
))
1469 object
= page
->freelist
;
1470 if (unlikely(!object
))
1472 if (unlikely(SlabDebug(page
)))
1475 object
= page
->freelist
;
1476 page
->lockless_freelist
= object
[page
->offset
];
1477 page
->inuse
= s
->objects
;
1478 page
->freelist
= NULL
;
1483 deactivate_slab(s
, page
, cpu
);
1486 page
= get_partial(s
, gfpflags
, node
);
1488 s
->cpu_slab
[cpu
] = page
;
1492 page
= new_slab(s
, gfpflags
, node
);
1494 cpu
= smp_processor_id();
1495 if (s
->cpu_slab
[cpu
]) {
1497 * Someone else populated the cpu_slab while we
1498 * enabled interrupts, or we have gotten scheduled
1499 * on another cpu. The page may not be on the
1500 * requested node even if __GFP_THISNODE was
1501 * specified. So we need to recheck.
1504 page_to_nid(s
->cpu_slab
[cpu
]) == node
) {
1506 * Current cpuslab is acceptable and we
1507 * want the current one since its cache hot
1509 discard_slab(s
, page
);
1510 page
= s
->cpu_slab
[cpu
];
1514 /* New slab does not fit our expectations */
1515 flush_slab(s
, s
->cpu_slab
[cpu
], cpu
);
1518 SetSlabFrozen(page
);
1519 s
->cpu_slab
[cpu
] = page
;
1524 object
= page
->freelist
;
1525 if (!alloc_debug_processing(s
, page
, object
, addr
))
1529 page
->freelist
= object
[page
->offset
];
1535 * Inlined fastpath so that allocation functions (kmalloc, kmem_cache_alloc)
1536 * have the fastpath folded into their functions. So no function call
1537 * overhead for requests that can be satisfied on the fastpath.
1539 * The fastpath works by first checking if the lockless freelist can be used.
1540 * If not then __slab_alloc is called for slow processing.
1542 * Otherwise we can simply pick the next object from the lockless free list.
1544 static void __always_inline
*slab_alloc(struct kmem_cache
*s
,
1545 gfp_t gfpflags
, int node
, void *addr
)
1549 unsigned long flags
;
1551 local_irq_save(flags
);
1552 page
= s
->cpu_slab
[smp_processor_id()];
1553 if (unlikely(!page
|| !page
->lockless_freelist
||
1554 (node
!= -1 && page_to_nid(page
) != node
)))
1556 object
= __slab_alloc(s
, gfpflags
, node
, addr
, page
);
1559 object
= page
->lockless_freelist
;
1560 page
->lockless_freelist
= object
[page
->offset
];
1562 local_irq_restore(flags
);
1564 if (unlikely((gfpflags
& __GFP_ZERO
) && object
))
1565 memset(object
, 0, s
->objsize
);
1570 void *kmem_cache_alloc(struct kmem_cache
*s
, gfp_t gfpflags
)
1572 return slab_alloc(s
, gfpflags
, -1, __builtin_return_address(0));
1574 EXPORT_SYMBOL(kmem_cache_alloc
);
1577 void *kmem_cache_alloc_node(struct kmem_cache
*s
, gfp_t gfpflags
, int node
)
1579 return slab_alloc(s
, gfpflags
, node
, __builtin_return_address(0));
1581 EXPORT_SYMBOL(kmem_cache_alloc_node
);
1585 * Slow patch handling. This may still be called frequently since objects
1586 * have a longer lifetime than the cpu slabs in most processing loads.
1588 * So we still attempt to reduce cache line usage. Just take the slab
1589 * lock and free the item. If there is no additional partial page
1590 * handling required then we can return immediately.
1592 static void __slab_free(struct kmem_cache
*s
, struct page
*page
,
1593 void *x
, void *addr
)
1596 void **object
= (void *)x
;
1600 if (unlikely(SlabDebug(page
)))
1603 prior
= object
[page
->offset
] = page
->freelist
;
1604 page
->freelist
= object
;
1607 if (unlikely(SlabFrozen(page
)))
1610 if (unlikely(!page
->inuse
))
1614 * Objects left in the slab. If it
1615 * was not on the partial list before
1618 if (unlikely(!prior
))
1619 add_partial(get_node(s
, page_to_nid(page
)), page
);
1628 * Slab still on the partial list.
1630 remove_partial(s
, page
);
1633 discard_slab(s
, page
);
1637 if (!free_debug_processing(s
, page
, x
, addr
))
1643 * Fastpath with forced inlining to produce a kfree and kmem_cache_free that
1644 * can perform fastpath freeing without additional function calls.
1646 * The fastpath is only possible if we are freeing to the current cpu slab
1647 * of this processor. This typically the case if we have just allocated
1650 * If fastpath is not possible then fall back to __slab_free where we deal
1651 * with all sorts of special processing.
1653 static void __always_inline
slab_free(struct kmem_cache
*s
,
1654 struct page
*page
, void *x
, void *addr
)
1656 void **object
= (void *)x
;
1657 unsigned long flags
;
1659 local_irq_save(flags
);
1660 debug_check_no_locks_freed(object
, s
->objsize
);
1661 if (likely(page
== s
->cpu_slab
[smp_processor_id()] &&
1662 !SlabDebug(page
))) {
1663 object
[page
->offset
] = page
->lockless_freelist
;
1664 page
->lockless_freelist
= object
;
1666 __slab_free(s
, page
, x
, addr
);
1668 local_irq_restore(flags
);
1671 void kmem_cache_free(struct kmem_cache
*s
, void *x
)
1675 page
= virt_to_head_page(x
);
1677 slab_free(s
, page
, x
, __builtin_return_address(0));
1679 EXPORT_SYMBOL(kmem_cache_free
);
1681 /* Figure out on which slab object the object resides */
1682 static struct page
*get_object_page(const void *x
)
1684 struct page
*page
= virt_to_head_page(x
);
1686 if (!PageSlab(page
))
1693 * Object placement in a slab is made very easy because we always start at
1694 * offset 0. If we tune the size of the object to the alignment then we can
1695 * get the required alignment by putting one properly sized object after
1698 * Notice that the allocation order determines the sizes of the per cpu
1699 * caches. Each processor has always one slab available for allocations.
1700 * Increasing the allocation order reduces the number of times that slabs
1701 * must be moved on and off the partial lists and is therefore a factor in
1706 * Mininum / Maximum order of slab pages. This influences locking overhead
1707 * and slab fragmentation. A higher order reduces the number of partial slabs
1708 * and increases the number of allocations possible without having to
1709 * take the list_lock.
1711 static int slub_min_order
;
1712 static int slub_max_order
= DEFAULT_MAX_ORDER
;
1713 static int slub_min_objects
= DEFAULT_MIN_OBJECTS
;
1716 * Merge control. If this is set then no merging of slab caches will occur.
1717 * (Could be removed. This was introduced to pacify the merge skeptics.)
1719 static int slub_nomerge
;
1722 * Calculate the order of allocation given an slab object size.
1724 * The order of allocation has significant impact on performance and other
1725 * system components. Generally order 0 allocations should be preferred since
1726 * order 0 does not cause fragmentation in the page allocator. Larger objects
1727 * be problematic to put into order 0 slabs because there may be too much
1728 * unused space left. We go to a higher order if more than 1/8th of the slab
1731 * In order to reach satisfactory performance we must ensure that a minimum
1732 * number of objects is in one slab. Otherwise we may generate too much
1733 * activity on the partial lists which requires taking the list_lock. This is
1734 * less a concern for large slabs though which are rarely used.
1736 * slub_max_order specifies the order where we begin to stop considering the
1737 * number of objects in a slab as critical. If we reach slub_max_order then
1738 * we try to keep the page order as low as possible. So we accept more waste
1739 * of space in favor of a small page order.
1741 * Higher order allocations also allow the placement of more objects in a
1742 * slab and thereby reduce object handling overhead. If the user has
1743 * requested a higher mininum order then we start with that one instead of
1744 * the smallest order which will fit the object.
1746 static inline int slab_order(int size
, int min_objects
,
1747 int max_order
, int fract_leftover
)
1751 int min_order
= slub_min_order
;
1754 * If we would create too many object per slab then reduce
1755 * the slab order even if it goes below slub_min_order.
1757 while (min_order
> 0 &&
1758 (PAGE_SIZE
<< min_order
) >= MAX_OBJECTS_PER_SLAB
* size
)
1761 for (order
= max(min_order
,
1762 fls(min_objects
* size
- 1) - PAGE_SHIFT
);
1763 order
<= max_order
; order
++) {
1765 unsigned long slab_size
= PAGE_SIZE
<< order
;
1767 if (slab_size
< min_objects
* size
)
1770 rem
= slab_size
% size
;
1772 if (rem
<= slab_size
/ fract_leftover
)
1775 /* If the next size is too high then exit now */
1776 if (slab_size
* 2 >= MAX_OBJECTS_PER_SLAB
* size
)
1783 static inline int calculate_order(int size
)
1790 * Attempt to find best configuration for a slab. This
1791 * works by first attempting to generate a layout with
1792 * the best configuration and backing off gradually.
1794 * First we reduce the acceptable waste in a slab. Then
1795 * we reduce the minimum objects required in a slab.
1797 min_objects
= slub_min_objects
;
1798 while (min_objects
> 1) {
1800 while (fraction
>= 4) {
1801 order
= slab_order(size
, min_objects
,
1802 slub_max_order
, fraction
);
1803 if (order
<= slub_max_order
)
1811 * We were unable to place multiple objects in a slab. Now
1812 * lets see if we can place a single object there.
1814 order
= slab_order(size
, 1, slub_max_order
, 1);
1815 if (order
<= slub_max_order
)
1819 * Doh this slab cannot be placed using slub_max_order.
1821 order
= slab_order(size
, 1, MAX_ORDER
, 1);
1822 if (order
<= MAX_ORDER
)
1828 * Figure out what the alignment of the objects will be.
1830 static unsigned long calculate_alignment(unsigned long flags
,
1831 unsigned long align
, unsigned long size
)
1834 * If the user wants hardware cache aligned objects then
1835 * follow that suggestion if the object is sufficiently
1838 * The hardware cache alignment cannot override the
1839 * specified alignment though. If that is greater
1842 if ((flags
& SLAB_HWCACHE_ALIGN
) &&
1843 size
> cache_line_size() / 2)
1844 return max_t(unsigned long, align
, cache_line_size());
1846 if (align
< ARCH_SLAB_MINALIGN
)
1847 return ARCH_SLAB_MINALIGN
;
1849 return ALIGN(align
, sizeof(void *));
1852 static void init_kmem_cache_node(struct kmem_cache_node
*n
)
1855 atomic_long_set(&n
->nr_slabs
, 0);
1856 spin_lock_init(&n
->list_lock
);
1857 INIT_LIST_HEAD(&n
->partial
);
1858 #ifdef CONFIG_SLUB_DEBUG
1859 INIT_LIST_HEAD(&n
->full
);
1865 * No kmalloc_node yet so do it by hand. We know that this is the first
1866 * slab on the node for this slabcache. There are no concurrent accesses
1869 * Note that this function only works on the kmalloc_node_cache
1870 * when allocating for the kmalloc_node_cache.
1872 static struct kmem_cache_node
* __init
early_kmem_cache_node_alloc(gfp_t gfpflags
,
1876 struct kmem_cache_node
*n
;
1878 BUG_ON(kmalloc_caches
->size
< sizeof(struct kmem_cache_node
));
1880 page
= new_slab(kmalloc_caches
, gfpflags
| GFP_THISNODE
, node
);
1885 page
->freelist
= get_freepointer(kmalloc_caches
, n
);
1887 kmalloc_caches
->node
[node
] = n
;
1888 #ifdef CONFIG_SLUB_DEBUG
1889 init_object(kmalloc_caches
, n
, 1);
1890 init_tracking(kmalloc_caches
, n
);
1892 init_kmem_cache_node(n
);
1893 atomic_long_inc(&n
->nr_slabs
);
1894 add_partial(n
, page
);
1897 * new_slab() disables interupts. If we do not reenable interrupts here
1898 * then bootup would continue with interrupts disabled.
1904 static void free_kmem_cache_nodes(struct kmem_cache
*s
)
1908 for_each_online_node(node
) {
1909 struct kmem_cache_node
*n
= s
->node
[node
];
1910 if (n
&& n
!= &s
->local_node
)
1911 kmem_cache_free(kmalloc_caches
, n
);
1912 s
->node
[node
] = NULL
;
1916 static int init_kmem_cache_nodes(struct kmem_cache
*s
, gfp_t gfpflags
)
1921 if (slab_state
>= UP
)
1922 local_node
= page_to_nid(virt_to_page(s
));
1926 for_each_online_node(node
) {
1927 struct kmem_cache_node
*n
;
1929 if (local_node
== node
)
1932 if (slab_state
== DOWN
) {
1933 n
= early_kmem_cache_node_alloc(gfpflags
,
1937 n
= kmem_cache_alloc_node(kmalloc_caches
,
1941 free_kmem_cache_nodes(s
);
1947 init_kmem_cache_node(n
);
1952 static void free_kmem_cache_nodes(struct kmem_cache
*s
)
1956 static int init_kmem_cache_nodes(struct kmem_cache
*s
, gfp_t gfpflags
)
1958 init_kmem_cache_node(&s
->local_node
);
1964 * calculate_sizes() determines the order and the distribution of data within
1967 static int calculate_sizes(struct kmem_cache
*s
)
1969 unsigned long flags
= s
->flags
;
1970 unsigned long size
= s
->objsize
;
1971 unsigned long align
= s
->align
;
1974 * Determine if we can poison the object itself. If the user of
1975 * the slab may touch the object after free or before allocation
1976 * then we should never poison the object itself.
1978 if ((flags
& SLAB_POISON
) && !(flags
& SLAB_DESTROY_BY_RCU
) &&
1980 s
->flags
|= __OBJECT_POISON
;
1982 s
->flags
&= ~__OBJECT_POISON
;
1985 * Round up object size to the next word boundary. We can only
1986 * place the free pointer at word boundaries and this determines
1987 * the possible location of the free pointer.
1989 size
= ALIGN(size
, sizeof(void *));
1991 #ifdef CONFIG_SLUB_DEBUG
1993 * If we are Redzoning then check if there is some space between the
1994 * end of the object and the free pointer. If not then add an
1995 * additional word to have some bytes to store Redzone information.
1997 if ((flags
& SLAB_RED_ZONE
) && size
== s
->objsize
)
1998 size
+= sizeof(void *);
2002 * With that we have determined the number of bytes in actual use
2003 * by the object. This is the potential offset to the free pointer.
2007 if (((flags
& (SLAB_DESTROY_BY_RCU
| SLAB_POISON
)) ||
2010 * Relocate free pointer after the object if it is not
2011 * permitted to overwrite the first word of the object on
2014 * This is the case if we do RCU, have a constructor or
2015 * destructor or are poisoning the objects.
2018 size
+= sizeof(void *);
2021 #ifdef CONFIG_SLUB_DEBUG
2022 if (flags
& SLAB_STORE_USER
)
2024 * Need to store information about allocs and frees after
2027 size
+= 2 * sizeof(struct track
);
2029 if (flags
& SLAB_RED_ZONE
)
2031 * Add some empty padding so that we can catch
2032 * overwrites from earlier objects rather than let
2033 * tracking information or the free pointer be
2034 * corrupted if an user writes before the start
2037 size
+= sizeof(void *);
2041 * Determine the alignment based on various parameters that the
2042 * user specified and the dynamic determination of cache line size
2045 align
= calculate_alignment(flags
, align
, s
->objsize
);
2048 * SLUB stores one object immediately after another beginning from
2049 * offset 0. In order to align the objects we have to simply size
2050 * each object to conform to the alignment.
2052 size
= ALIGN(size
, align
);
2055 s
->order
= calculate_order(size
);
2060 * Determine the number of objects per slab
2062 s
->objects
= (PAGE_SIZE
<< s
->order
) / size
;
2065 * Verify that the number of objects is within permitted limits.
2066 * The page->inuse field is only 16 bit wide! So we cannot have
2067 * more than 64k objects per slab.
2069 if (!s
->objects
|| s
->objects
> MAX_OBJECTS_PER_SLAB
)
2075 static int kmem_cache_open(struct kmem_cache
*s
, gfp_t gfpflags
,
2076 const char *name
, size_t size
,
2077 size_t align
, unsigned long flags
,
2078 void (*ctor
)(void *, struct kmem_cache
*, unsigned long))
2080 memset(s
, 0, kmem_size
);
2086 kmem_cache_open_debug_check(s
);
2088 if (!calculate_sizes(s
))
2093 s
->defrag_ratio
= 100;
2096 if (init_kmem_cache_nodes(s
, gfpflags
& ~SLUB_DMA
))
2099 if (flags
& SLAB_PANIC
)
2100 panic("Cannot create slab %s size=%lu realsize=%u "
2101 "order=%u offset=%u flags=%lx\n",
2102 s
->name
, (unsigned long)size
, s
->size
, s
->order
,
2108 * Check if a given pointer is valid
2110 int kmem_ptr_validate(struct kmem_cache
*s
, const void *object
)
2114 page
= get_object_page(object
);
2116 if (!page
|| s
!= page
->slab
)
2117 /* No slab or wrong slab */
2120 if (!check_valid_pointer(s
, page
, object
))
2124 * We could also check if the object is on the slabs freelist.
2125 * But this would be too expensive and it seems that the main
2126 * purpose of kmem_ptr_valid is to check if the object belongs
2127 * to a certain slab.
2131 EXPORT_SYMBOL(kmem_ptr_validate
);
2134 * Determine the size of a slab object
2136 unsigned int kmem_cache_size(struct kmem_cache
*s
)
2140 EXPORT_SYMBOL(kmem_cache_size
);
2142 const char *kmem_cache_name(struct kmem_cache
*s
)
2146 EXPORT_SYMBOL(kmem_cache_name
);
2149 * Attempt to free all slabs on a node. Return the number of slabs we
2150 * were unable to free.
2152 static int free_list(struct kmem_cache
*s
, struct kmem_cache_node
*n
,
2153 struct list_head
*list
)
2155 int slabs_inuse
= 0;
2156 unsigned long flags
;
2157 struct page
*page
, *h
;
2159 spin_lock_irqsave(&n
->list_lock
, flags
);
2160 list_for_each_entry_safe(page
, h
, list
, lru
)
2162 list_del(&page
->lru
);
2163 discard_slab(s
, page
);
2166 spin_unlock_irqrestore(&n
->list_lock
, flags
);
2171 * Release all resources used by a slab cache.
2173 static inline int kmem_cache_close(struct kmem_cache
*s
)
2179 /* Attempt to free all objects */
2180 for_each_online_node(node
) {
2181 struct kmem_cache_node
*n
= get_node(s
, node
);
2183 n
->nr_partial
-= free_list(s
, n
, &n
->partial
);
2184 if (atomic_long_read(&n
->nr_slabs
))
2187 free_kmem_cache_nodes(s
);
2192 * Close a cache and release the kmem_cache structure
2193 * (must be used for caches created using kmem_cache_create)
2195 void kmem_cache_destroy(struct kmem_cache
*s
)
2197 down_write(&slub_lock
);
2201 up_write(&slub_lock
);
2202 if (kmem_cache_close(s
))
2204 sysfs_slab_remove(s
);
2207 up_write(&slub_lock
);
2209 EXPORT_SYMBOL(kmem_cache_destroy
);
2211 /********************************************************************
2213 *******************************************************************/
2215 struct kmem_cache kmalloc_caches
[KMALLOC_SHIFT_HIGH
+ 1] __cacheline_aligned
;
2216 EXPORT_SYMBOL(kmalloc_caches
);
2218 #ifdef CONFIG_ZONE_DMA
2219 static struct kmem_cache
*kmalloc_caches_dma
[KMALLOC_SHIFT_HIGH
+ 1];
2222 static int __init
setup_slub_min_order(char *str
)
2224 get_option (&str
, &slub_min_order
);
2229 __setup("slub_min_order=", setup_slub_min_order
);
2231 static int __init
setup_slub_max_order(char *str
)
2233 get_option (&str
, &slub_max_order
);
2238 __setup("slub_max_order=", setup_slub_max_order
);
2240 static int __init
setup_slub_min_objects(char *str
)
2242 get_option (&str
, &slub_min_objects
);
2247 __setup("slub_min_objects=", setup_slub_min_objects
);
2249 static int __init
setup_slub_nomerge(char *str
)
2255 __setup("slub_nomerge", setup_slub_nomerge
);
2257 static struct kmem_cache
*create_kmalloc_cache(struct kmem_cache
*s
,
2258 const char *name
, int size
, gfp_t gfp_flags
)
2260 unsigned int flags
= 0;
2262 if (gfp_flags
& SLUB_DMA
)
2263 flags
= SLAB_CACHE_DMA
;
2265 down_write(&slub_lock
);
2266 if (!kmem_cache_open(s
, gfp_flags
, name
, size
, ARCH_KMALLOC_MINALIGN
,
2270 list_add(&s
->list
, &slab_caches
);
2271 up_write(&slub_lock
);
2272 if (sysfs_slab_add(s
))
2277 panic("Creation of kmalloc slab %s size=%d failed.\n", name
, size
);
2280 #ifdef CONFIG_ZONE_DMA
2282 static void sysfs_add_func(struct work_struct
*w
)
2284 struct kmem_cache
*s
;
2286 down_write(&slub_lock
);
2287 list_for_each_entry(s
, &slab_caches
, list
) {
2288 if (s
->flags
& __SYSFS_ADD_DEFERRED
) {
2289 s
->flags
&= ~__SYSFS_ADD_DEFERRED
;
2293 up_write(&slub_lock
);
2296 static DECLARE_WORK(sysfs_add_work
, sysfs_add_func
);
2298 static noinline
struct kmem_cache
*dma_kmalloc_cache(int index
, gfp_t flags
)
2300 struct kmem_cache
*s
;
2304 s
= kmalloc_caches_dma
[index
];
2308 /* Dynamically create dma cache */
2309 if (flags
& __GFP_WAIT
)
2310 down_write(&slub_lock
);
2312 if (!down_write_trylock(&slub_lock
))
2316 if (kmalloc_caches_dma
[index
])
2319 realsize
= kmalloc_caches
[index
].objsize
;
2320 text
= kasprintf(flags
& ~SLUB_DMA
, "kmalloc_dma-%d", (unsigned int)realsize
),
2321 s
= kmalloc(kmem_size
, flags
& ~SLUB_DMA
);
2323 if (!s
|| !text
|| !kmem_cache_open(s
, flags
, text
,
2324 realsize
, ARCH_KMALLOC_MINALIGN
,
2325 SLAB_CACHE_DMA
|__SYSFS_ADD_DEFERRED
, NULL
)) {
2331 list_add(&s
->list
, &slab_caches
);
2332 kmalloc_caches_dma
[index
] = s
;
2334 schedule_work(&sysfs_add_work
);
2337 up_write(&slub_lock
);
2339 return kmalloc_caches_dma
[index
];
2344 * Conversion table for small slabs sizes / 8 to the index in the
2345 * kmalloc array. This is necessary for slabs < 192 since we have non power
2346 * of two cache sizes there. The size of larger slabs can be determined using
2349 static s8 size_index
[24] = {
2376 static struct kmem_cache
*get_slab(size_t size
, gfp_t flags
)
2382 return ZERO_SIZE_PTR
;
2384 index
= size_index
[(size
- 1) / 8];
2386 if (size
> KMALLOC_MAX_SIZE
)
2389 index
= fls(size
- 1);
2392 #ifdef CONFIG_ZONE_DMA
2393 if (unlikely((flags
& SLUB_DMA
)))
2394 return dma_kmalloc_cache(index
, flags
);
2397 return &kmalloc_caches
[index
];
2400 void *__kmalloc(size_t size
, gfp_t flags
)
2402 struct kmem_cache
*s
= get_slab(size
, flags
);
2404 if (ZERO_OR_NULL_PTR(s
))
2407 return slab_alloc(s
, flags
, -1, __builtin_return_address(0));
2409 EXPORT_SYMBOL(__kmalloc
);
2412 void *__kmalloc_node(size_t size
, gfp_t flags
, int node
)
2414 struct kmem_cache
*s
= get_slab(size
, flags
);
2416 if (ZERO_OR_NULL_PTR(s
))
2419 return slab_alloc(s
, flags
, node
, __builtin_return_address(0));
2421 EXPORT_SYMBOL(__kmalloc_node
);
2424 size_t ksize(const void *object
)
2427 struct kmem_cache
*s
;
2429 if (ZERO_OR_NULL_PTR(object
))
2432 page
= get_object_page(object
);
2438 * Debugging requires use of the padding between object
2439 * and whatever may come after it.
2441 if (s
->flags
& (SLAB_RED_ZONE
| SLAB_POISON
))
2445 * If we have the need to store the freelist pointer
2446 * back there or track user information then we can
2447 * only use the space before that information.
2449 if (s
->flags
& (SLAB_DESTROY_BY_RCU
| SLAB_STORE_USER
))
2453 * Else we can use all the padding etc for the allocation
2457 EXPORT_SYMBOL(ksize
);
2459 void kfree(const void *x
)
2461 struct kmem_cache
*s
;
2465 * This has to be an unsigned comparison. According to Linus
2466 * some gcc version treat a pointer as a signed entity. Then
2467 * this comparison would be true for all "negative" pointers
2468 * (which would cover the whole upper half of the address space).
2470 if (ZERO_OR_NULL_PTR(x
))
2473 page
= virt_to_head_page(x
);
2476 slab_free(s
, page
, (void *)x
, __builtin_return_address(0));
2478 EXPORT_SYMBOL(kfree
);
2481 * kmem_cache_shrink removes empty slabs from the partial lists and sorts
2482 * the remaining slabs by the number of items in use. The slabs with the
2483 * most items in use come first. New allocations will then fill those up
2484 * and thus they can be removed from the partial lists.
2486 * The slabs with the least items are placed last. This results in them
2487 * being allocated from last increasing the chance that the last objects
2488 * are freed in them.
2490 int kmem_cache_shrink(struct kmem_cache
*s
)
2494 struct kmem_cache_node
*n
;
2497 struct list_head
*slabs_by_inuse
=
2498 kmalloc(sizeof(struct list_head
) * s
->objects
, GFP_KERNEL
);
2499 unsigned long flags
;
2501 if (!slabs_by_inuse
)
2505 for_each_online_node(node
) {
2506 n
= get_node(s
, node
);
2511 for (i
= 0; i
< s
->objects
; i
++)
2512 INIT_LIST_HEAD(slabs_by_inuse
+ i
);
2514 spin_lock_irqsave(&n
->list_lock
, flags
);
2517 * Build lists indexed by the items in use in each slab.
2519 * Note that concurrent frees may occur while we hold the
2520 * list_lock. page->inuse here is the upper limit.
2522 list_for_each_entry_safe(page
, t
, &n
->partial
, lru
) {
2523 if (!page
->inuse
&& slab_trylock(page
)) {
2525 * Must hold slab lock here because slab_free
2526 * may have freed the last object and be
2527 * waiting to release the slab.
2529 list_del(&page
->lru
);
2532 discard_slab(s
, page
);
2534 list_move(&page
->lru
,
2535 slabs_by_inuse
+ page
->inuse
);
2540 * Rebuild the partial list with the slabs filled up most
2541 * first and the least used slabs at the end.
2543 for (i
= s
->objects
- 1; i
>= 0; i
--)
2544 list_splice(slabs_by_inuse
+ i
, n
->partial
.prev
);
2546 spin_unlock_irqrestore(&n
->list_lock
, flags
);
2549 kfree(slabs_by_inuse
);
2552 EXPORT_SYMBOL(kmem_cache_shrink
);
2554 /********************************************************************
2555 * Basic setup of slabs
2556 *******************************************************************/
2558 void __init
kmem_cache_init(void)
2565 * Must first have the slab cache available for the allocations of the
2566 * struct kmem_cache_node's. There is special bootstrap code in
2567 * kmem_cache_open for slab_state == DOWN.
2569 create_kmalloc_cache(&kmalloc_caches
[0], "kmem_cache_node",
2570 sizeof(struct kmem_cache_node
), GFP_KERNEL
);
2571 kmalloc_caches
[0].refcount
= -1;
2575 /* Able to allocate the per node structures */
2576 slab_state
= PARTIAL
;
2578 /* Caches that are not of the two-to-the-power-of size */
2579 if (KMALLOC_MIN_SIZE
<= 64) {
2580 create_kmalloc_cache(&kmalloc_caches
[1],
2581 "kmalloc-96", 96, GFP_KERNEL
);
2584 if (KMALLOC_MIN_SIZE
<= 128) {
2585 create_kmalloc_cache(&kmalloc_caches
[2],
2586 "kmalloc-192", 192, GFP_KERNEL
);
2590 for (i
= KMALLOC_SHIFT_LOW
; i
<= KMALLOC_SHIFT_HIGH
; i
++) {
2591 create_kmalloc_cache(&kmalloc_caches
[i
],
2592 "kmalloc", 1 << i
, GFP_KERNEL
);
2598 * Patch up the size_index table if we have strange large alignment
2599 * requirements for the kmalloc array. This is only the case for
2600 * mips it seems. The standard arches will not generate any code here.
2602 * Largest permitted alignment is 256 bytes due to the way we
2603 * handle the index determination for the smaller caches.
2605 * Make sure that nothing crazy happens if someone starts tinkering
2606 * around with ARCH_KMALLOC_MINALIGN
2608 BUILD_BUG_ON(KMALLOC_MIN_SIZE
> 256 ||
2609 (KMALLOC_MIN_SIZE
& (KMALLOC_MIN_SIZE
- 1)));
2611 for (i
= 8; i
< KMALLOC_MIN_SIZE
; i
+= 8)
2612 size_index
[(i
- 1) / 8] = KMALLOC_SHIFT_LOW
;
2616 /* Provide the correct kmalloc names now that the caches are up */
2617 for (i
= KMALLOC_SHIFT_LOW
; i
<= KMALLOC_SHIFT_HIGH
; i
++)
2618 kmalloc_caches
[i
]. name
=
2619 kasprintf(GFP_KERNEL
, "kmalloc-%d", 1 << i
);
2622 register_cpu_notifier(&slab_notifier
);
2625 kmem_size
= offsetof(struct kmem_cache
, cpu_slab
) +
2626 nr_cpu_ids
* sizeof(struct page
*);
2628 printk(KERN_INFO
"SLUB: Genslabs=%d, HWalign=%d, Order=%d-%d, MinObjects=%d,"
2629 " CPUs=%d, Nodes=%d\n",
2630 caches
, cache_line_size(),
2631 slub_min_order
, slub_max_order
, slub_min_objects
,
2632 nr_cpu_ids
, nr_node_ids
);
2636 * Find a mergeable slab cache
2638 static int slab_unmergeable(struct kmem_cache
*s
)
2640 if (slub_nomerge
|| (s
->flags
& SLUB_NEVER_MERGE
))
2647 * We may have set a slab to be unmergeable during bootstrap.
2649 if (s
->refcount
< 0)
2655 static struct kmem_cache
*find_mergeable(size_t size
,
2656 size_t align
, unsigned long flags
,
2657 void (*ctor
)(void *, struct kmem_cache
*, unsigned long))
2659 struct kmem_cache
*s
;
2661 if (slub_nomerge
|| (flags
& SLUB_NEVER_MERGE
))
2667 size
= ALIGN(size
, sizeof(void *));
2668 align
= calculate_alignment(flags
, align
, size
);
2669 size
= ALIGN(size
, align
);
2671 list_for_each_entry(s
, &slab_caches
, list
) {
2672 if (slab_unmergeable(s
))
2678 if (((flags
| slub_debug
) & SLUB_MERGE_SAME
) !=
2679 (s
->flags
& SLUB_MERGE_SAME
))
2682 * Check if alignment is compatible.
2683 * Courtesy of Adrian Drzewiecki
2685 if ((s
->size
& ~(align
-1)) != s
->size
)
2688 if (s
->size
- size
>= sizeof(void *))
2696 struct kmem_cache
*kmem_cache_create(const char *name
, size_t size
,
2697 size_t align
, unsigned long flags
,
2698 void (*ctor
)(void *, struct kmem_cache
*, unsigned long))
2700 struct kmem_cache
*s
;
2702 down_write(&slub_lock
);
2703 s
= find_mergeable(size
, align
, flags
, ctor
);
2707 * Adjust the object sizes so that we clear
2708 * the complete object on kzalloc.
2710 s
->objsize
= max(s
->objsize
, (int)size
);
2711 s
->inuse
= max_t(int, s
->inuse
, ALIGN(size
, sizeof(void *)));
2712 up_write(&slub_lock
);
2713 if (sysfs_slab_alias(s
, name
))
2717 s
= kmalloc(kmem_size
, GFP_KERNEL
);
2719 if (kmem_cache_open(s
, GFP_KERNEL
, name
,
2720 size
, align
, flags
, ctor
)) {
2721 list_add(&s
->list
, &slab_caches
);
2722 up_write(&slub_lock
);
2723 if (sysfs_slab_add(s
))
2729 up_write(&slub_lock
);
2732 if (flags
& SLAB_PANIC
)
2733 panic("Cannot create slabcache %s\n", name
);
2738 EXPORT_SYMBOL(kmem_cache_create
);
2742 * Use the cpu notifier to insure that the cpu slabs are flushed when
2745 static int __cpuinit
slab_cpuup_callback(struct notifier_block
*nfb
,
2746 unsigned long action
, void *hcpu
)
2748 long cpu
= (long)hcpu
;
2749 struct kmem_cache
*s
;
2750 unsigned long flags
;
2753 case CPU_UP_CANCELED
:
2754 case CPU_UP_CANCELED_FROZEN
:
2756 case CPU_DEAD_FROZEN
:
2757 down_read(&slub_lock
);
2758 list_for_each_entry(s
, &slab_caches
, list
) {
2759 local_irq_save(flags
);
2760 __flush_cpu_slab(s
, cpu
);
2761 local_irq_restore(flags
);
2763 up_read(&slub_lock
);
2771 static struct notifier_block __cpuinitdata slab_notifier
=
2772 { &slab_cpuup_callback
, NULL
, 0 };
2776 void *__kmalloc_track_caller(size_t size
, gfp_t gfpflags
, void *caller
)
2778 struct kmem_cache
*s
= get_slab(size
, gfpflags
);
2780 if (ZERO_OR_NULL_PTR(s
))
2783 return slab_alloc(s
, gfpflags
, -1, caller
);
2786 void *__kmalloc_node_track_caller(size_t size
, gfp_t gfpflags
,
2787 int node
, void *caller
)
2789 struct kmem_cache
*s
= get_slab(size
, gfpflags
);
2791 if (ZERO_OR_NULL_PTR(s
))
2794 return slab_alloc(s
, gfpflags
, node
, caller
);
2797 #if defined(CONFIG_SYSFS) && defined(CONFIG_SLUB_DEBUG)
2798 static int validate_slab(struct kmem_cache
*s
, struct page
*page
,
2802 void *addr
= page_address(page
);
2804 if (!check_slab(s
, page
) ||
2805 !on_freelist(s
, page
, NULL
))
2808 /* Now we know that a valid freelist exists */
2809 bitmap_zero(map
, s
->objects
);
2811 for_each_free_object(p
, s
, page
->freelist
) {
2812 set_bit(slab_index(p
, s
, addr
), map
);
2813 if (!check_object(s
, page
, p
, 0))
2817 for_each_object(p
, s
, addr
)
2818 if (!test_bit(slab_index(p
, s
, addr
), map
))
2819 if (!check_object(s
, page
, p
, 1))
2824 static void validate_slab_slab(struct kmem_cache
*s
, struct page
*page
,
2827 if (slab_trylock(page
)) {
2828 validate_slab(s
, page
, map
);
2831 printk(KERN_INFO
"SLUB %s: Skipped busy slab 0x%p\n",
2834 if (s
->flags
& DEBUG_DEFAULT_FLAGS
) {
2835 if (!SlabDebug(page
))
2836 printk(KERN_ERR
"SLUB %s: SlabDebug not set "
2837 "on slab 0x%p\n", s
->name
, page
);
2839 if (SlabDebug(page
))
2840 printk(KERN_ERR
"SLUB %s: SlabDebug set on "
2841 "slab 0x%p\n", s
->name
, page
);
2845 static int validate_slab_node(struct kmem_cache
*s
,
2846 struct kmem_cache_node
*n
, unsigned long *map
)
2848 unsigned long count
= 0;
2850 unsigned long flags
;
2852 spin_lock_irqsave(&n
->list_lock
, flags
);
2854 list_for_each_entry(page
, &n
->partial
, lru
) {
2855 validate_slab_slab(s
, page
, map
);
2858 if (count
!= n
->nr_partial
)
2859 printk(KERN_ERR
"SLUB %s: %ld partial slabs counted but "
2860 "counter=%ld\n", s
->name
, count
, n
->nr_partial
);
2862 if (!(s
->flags
& SLAB_STORE_USER
))
2865 list_for_each_entry(page
, &n
->full
, lru
) {
2866 validate_slab_slab(s
, page
, map
);
2869 if (count
!= atomic_long_read(&n
->nr_slabs
))
2870 printk(KERN_ERR
"SLUB: %s %ld slabs counted but "
2871 "counter=%ld\n", s
->name
, count
,
2872 atomic_long_read(&n
->nr_slabs
));
2875 spin_unlock_irqrestore(&n
->list_lock
, flags
);
2879 static long validate_slab_cache(struct kmem_cache
*s
)
2882 unsigned long count
= 0;
2883 unsigned long *map
= kmalloc(BITS_TO_LONGS(s
->objects
) *
2884 sizeof(unsigned long), GFP_KERNEL
);
2890 for_each_online_node(node
) {
2891 struct kmem_cache_node
*n
= get_node(s
, node
);
2893 count
+= validate_slab_node(s
, n
, map
);
2899 #ifdef SLUB_RESILIENCY_TEST
2900 static void resiliency_test(void)
2904 printk(KERN_ERR
"SLUB resiliency testing\n");
2905 printk(KERN_ERR
"-----------------------\n");
2906 printk(KERN_ERR
"A. Corruption after allocation\n");
2908 p
= kzalloc(16, GFP_KERNEL
);
2910 printk(KERN_ERR
"\n1. kmalloc-16: Clobber Redzone/next pointer"
2911 " 0x12->0x%p\n\n", p
+ 16);
2913 validate_slab_cache(kmalloc_caches
+ 4);
2915 /* Hmmm... The next two are dangerous */
2916 p
= kzalloc(32, GFP_KERNEL
);
2917 p
[32 + sizeof(void *)] = 0x34;
2918 printk(KERN_ERR
"\n2. kmalloc-32: Clobber next pointer/next slab"
2919 " 0x34 -> -0x%p\n", p
);
2920 printk(KERN_ERR
"If allocated object is overwritten then not detectable\n\n");
2922 validate_slab_cache(kmalloc_caches
+ 5);
2923 p
= kzalloc(64, GFP_KERNEL
);
2924 p
+= 64 + (get_cycles() & 0xff) * sizeof(void *);
2926 printk(KERN_ERR
"\n3. kmalloc-64: corrupting random byte 0x56->0x%p\n",
2928 printk(KERN_ERR
"If allocated object is overwritten then not detectable\n\n");
2929 validate_slab_cache(kmalloc_caches
+ 6);
2931 printk(KERN_ERR
"\nB. Corruption after free\n");
2932 p
= kzalloc(128, GFP_KERNEL
);
2935 printk(KERN_ERR
"1. kmalloc-128: Clobber first word 0x78->0x%p\n\n", p
);
2936 validate_slab_cache(kmalloc_caches
+ 7);
2938 p
= kzalloc(256, GFP_KERNEL
);
2941 printk(KERN_ERR
"\n2. kmalloc-256: Clobber 50th byte 0x9a->0x%p\n\n", p
);
2942 validate_slab_cache(kmalloc_caches
+ 8);
2944 p
= kzalloc(512, GFP_KERNEL
);
2947 printk(KERN_ERR
"\n3. kmalloc-512: Clobber redzone 0xab->0x%p\n\n", p
);
2948 validate_slab_cache(kmalloc_caches
+ 9);
2951 static void resiliency_test(void) {};
2955 * Generate lists of code addresses where slabcache objects are allocated
2960 unsigned long count
;
2973 unsigned long count
;
2974 struct location
*loc
;
2977 static void free_loc_track(struct loc_track
*t
)
2980 free_pages((unsigned long)t
->loc
,
2981 get_order(sizeof(struct location
) * t
->max
));
2984 static int alloc_loc_track(struct loc_track
*t
, unsigned long max
, gfp_t flags
)
2989 order
= get_order(sizeof(struct location
) * max
);
2991 l
= (void *)__get_free_pages(flags
, order
);
2996 memcpy(l
, t
->loc
, sizeof(struct location
) * t
->count
);
3004 static int add_location(struct loc_track
*t
, struct kmem_cache
*s
,
3005 const struct track
*track
)
3007 long start
, end
, pos
;
3010 unsigned long age
= jiffies
- track
->when
;
3016 pos
= start
+ (end
- start
+ 1) / 2;
3019 * There is nothing at "end". If we end up there
3020 * we need to add something to before end.
3025 caddr
= t
->loc
[pos
].addr
;
3026 if (track
->addr
== caddr
) {
3032 if (age
< l
->min_time
)
3034 if (age
> l
->max_time
)
3037 if (track
->pid
< l
->min_pid
)
3038 l
->min_pid
= track
->pid
;
3039 if (track
->pid
> l
->max_pid
)
3040 l
->max_pid
= track
->pid
;
3042 cpu_set(track
->cpu
, l
->cpus
);
3044 node_set(page_to_nid(virt_to_page(track
)), l
->nodes
);
3048 if (track
->addr
< caddr
)
3055 * Not found. Insert new tracking element.
3057 if (t
->count
>= t
->max
&& !alloc_loc_track(t
, 2 * t
->max
, GFP_ATOMIC
))
3063 (t
->count
- pos
) * sizeof(struct location
));
3066 l
->addr
= track
->addr
;
3070 l
->min_pid
= track
->pid
;
3071 l
->max_pid
= track
->pid
;
3072 cpus_clear(l
->cpus
);
3073 cpu_set(track
->cpu
, l
->cpus
);
3074 nodes_clear(l
->nodes
);
3075 node_set(page_to_nid(virt_to_page(track
)), l
->nodes
);
3079 static void process_slab(struct loc_track
*t
, struct kmem_cache
*s
,
3080 struct page
*page
, enum track_item alloc
)
3082 void *addr
= page_address(page
);
3083 DECLARE_BITMAP(map
, s
->objects
);
3086 bitmap_zero(map
, s
->objects
);
3087 for_each_free_object(p
, s
, page
->freelist
)
3088 set_bit(slab_index(p
, s
, addr
), map
);
3090 for_each_object(p
, s
, addr
)
3091 if (!test_bit(slab_index(p
, s
, addr
), map
))
3092 add_location(t
, s
, get_track(s
, p
, alloc
));
3095 static int list_locations(struct kmem_cache
*s
, char *buf
,
3096 enum track_item alloc
)
3100 struct loc_track t
= { 0, 0, NULL
};
3103 if (!alloc_loc_track(&t
, PAGE_SIZE
/ sizeof(struct location
),
3105 return sprintf(buf
, "Out of memory\n");
3107 /* Push back cpu slabs */
3110 for_each_online_node(node
) {
3111 struct kmem_cache_node
*n
= get_node(s
, node
);
3112 unsigned long flags
;
3115 if (!atomic_read(&n
->nr_slabs
))
3118 spin_lock_irqsave(&n
->list_lock
, flags
);
3119 list_for_each_entry(page
, &n
->partial
, lru
)
3120 process_slab(&t
, s
, page
, alloc
);
3121 list_for_each_entry(page
, &n
->full
, lru
)
3122 process_slab(&t
, s
, page
, alloc
);
3123 spin_unlock_irqrestore(&n
->list_lock
, flags
);
3126 for (i
= 0; i
< t
.count
; i
++) {
3127 struct location
*l
= &t
.loc
[i
];
3129 if (n
> PAGE_SIZE
- 100)
3131 n
+= sprintf(buf
+ n
, "%7ld ", l
->count
);
3134 n
+= sprint_symbol(buf
+ n
, (unsigned long)l
->addr
);
3136 n
+= sprintf(buf
+ n
, "<not-available>");
3138 if (l
->sum_time
!= l
->min_time
) {
3139 unsigned long remainder
;
3141 n
+= sprintf(buf
+ n
, " age=%ld/%ld/%ld",
3143 div_long_long_rem(l
->sum_time
, l
->count
, &remainder
),
3146 n
+= sprintf(buf
+ n
, " age=%ld",
3149 if (l
->min_pid
!= l
->max_pid
)
3150 n
+= sprintf(buf
+ n
, " pid=%ld-%ld",
3151 l
->min_pid
, l
->max_pid
);
3153 n
+= sprintf(buf
+ n
, " pid=%ld",
3156 if (num_online_cpus() > 1 && !cpus_empty(l
->cpus
) &&
3157 n
< PAGE_SIZE
- 60) {
3158 n
+= sprintf(buf
+ n
, " cpus=");
3159 n
+= cpulist_scnprintf(buf
+ n
, PAGE_SIZE
- n
- 50,
3163 if (num_online_nodes() > 1 && !nodes_empty(l
->nodes
) &&
3164 n
< PAGE_SIZE
- 60) {
3165 n
+= sprintf(buf
+ n
, " nodes=");
3166 n
+= nodelist_scnprintf(buf
+ n
, PAGE_SIZE
- n
- 50,
3170 n
+= sprintf(buf
+ n
, "\n");
3175 n
+= sprintf(buf
, "No data\n");
3179 static unsigned long count_partial(struct kmem_cache_node
*n
)
3181 unsigned long flags
;
3182 unsigned long x
= 0;
3185 spin_lock_irqsave(&n
->list_lock
, flags
);
3186 list_for_each_entry(page
, &n
->partial
, lru
)
3188 spin_unlock_irqrestore(&n
->list_lock
, flags
);
3192 enum slab_stat_type
{
3199 #define SO_FULL (1 << SL_FULL)
3200 #define SO_PARTIAL (1 << SL_PARTIAL)
3201 #define SO_CPU (1 << SL_CPU)
3202 #define SO_OBJECTS (1 << SL_OBJECTS)
3204 static unsigned long slab_objects(struct kmem_cache
*s
,
3205 char *buf
, unsigned long flags
)
3207 unsigned long total
= 0;
3211 unsigned long *nodes
;
3212 unsigned long *per_cpu
;
3214 nodes
= kzalloc(2 * sizeof(unsigned long) * nr_node_ids
, GFP_KERNEL
);
3215 per_cpu
= nodes
+ nr_node_ids
;
3217 for_each_possible_cpu(cpu
) {
3218 struct page
*page
= s
->cpu_slab
[cpu
];
3222 node
= page_to_nid(page
);
3223 if (flags
& SO_CPU
) {
3226 if (flags
& SO_OBJECTS
)
3237 for_each_online_node(node
) {
3238 struct kmem_cache_node
*n
= get_node(s
, node
);
3240 if (flags
& SO_PARTIAL
) {
3241 if (flags
& SO_OBJECTS
)
3242 x
= count_partial(n
);
3249 if (flags
& SO_FULL
) {
3250 int full_slabs
= atomic_read(&n
->nr_slabs
)
3254 if (flags
& SO_OBJECTS
)
3255 x
= full_slabs
* s
->objects
;
3263 x
= sprintf(buf
, "%lu", total
);
3265 for_each_online_node(node
)
3267 x
+= sprintf(buf
+ x
, " N%d=%lu",
3271 return x
+ sprintf(buf
+ x
, "\n");
3274 static int any_slab_objects(struct kmem_cache
*s
)
3279 for_each_possible_cpu(cpu
)
3280 if (s
->cpu_slab
[cpu
])
3283 for_each_node(node
) {
3284 struct kmem_cache_node
*n
= get_node(s
, node
);
3286 if (n
->nr_partial
|| atomic_read(&n
->nr_slabs
))
3292 #define to_slab_attr(n) container_of(n, struct slab_attribute, attr)
3293 #define to_slab(n) container_of(n, struct kmem_cache, kobj);
3295 struct slab_attribute
{
3296 struct attribute attr
;
3297 ssize_t (*show
)(struct kmem_cache
*s
, char *buf
);
3298 ssize_t (*store
)(struct kmem_cache
*s
, const char *x
, size_t count
);
3301 #define SLAB_ATTR_RO(_name) \
3302 static struct slab_attribute _name##_attr = __ATTR_RO(_name)
3304 #define SLAB_ATTR(_name) \
3305 static struct slab_attribute _name##_attr = \
3306 __ATTR(_name, 0644, _name##_show, _name##_store)
3308 static ssize_t
slab_size_show(struct kmem_cache
*s
, char *buf
)
3310 return sprintf(buf
, "%d\n", s
->size
);
3312 SLAB_ATTR_RO(slab_size
);
3314 static ssize_t
align_show(struct kmem_cache
*s
, char *buf
)
3316 return sprintf(buf
, "%d\n", s
->align
);
3318 SLAB_ATTR_RO(align
);
3320 static ssize_t
object_size_show(struct kmem_cache
*s
, char *buf
)
3322 return sprintf(buf
, "%d\n", s
->objsize
);
3324 SLAB_ATTR_RO(object_size
);
3326 static ssize_t
objs_per_slab_show(struct kmem_cache
*s
, char *buf
)
3328 return sprintf(buf
, "%d\n", s
->objects
);
3330 SLAB_ATTR_RO(objs_per_slab
);
3332 static ssize_t
order_show(struct kmem_cache
*s
, char *buf
)
3334 return sprintf(buf
, "%d\n", s
->order
);
3336 SLAB_ATTR_RO(order
);
3338 static ssize_t
ctor_show(struct kmem_cache
*s
, char *buf
)
3341 int n
= sprint_symbol(buf
, (unsigned long)s
->ctor
);
3343 return n
+ sprintf(buf
+ n
, "\n");
3349 static ssize_t
aliases_show(struct kmem_cache
*s
, char *buf
)
3351 return sprintf(buf
, "%d\n", s
->refcount
- 1);
3353 SLAB_ATTR_RO(aliases
);
3355 static ssize_t
slabs_show(struct kmem_cache
*s
, char *buf
)
3357 return slab_objects(s
, buf
, SO_FULL
|SO_PARTIAL
|SO_CPU
);
3359 SLAB_ATTR_RO(slabs
);
3361 static ssize_t
partial_show(struct kmem_cache
*s
, char *buf
)
3363 return slab_objects(s
, buf
, SO_PARTIAL
);
3365 SLAB_ATTR_RO(partial
);
3367 static ssize_t
cpu_slabs_show(struct kmem_cache
*s
, char *buf
)
3369 return slab_objects(s
, buf
, SO_CPU
);
3371 SLAB_ATTR_RO(cpu_slabs
);
3373 static ssize_t
objects_show(struct kmem_cache
*s
, char *buf
)
3375 return slab_objects(s
, buf
, SO_FULL
|SO_PARTIAL
|SO_CPU
|SO_OBJECTS
);
3377 SLAB_ATTR_RO(objects
);
3379 static ssize_t
sanity_checks_show(struct kmem_cache
*s
, char *buf
)
3381 return sprintf(buf
, "%d\n", !!(s
->flags
& SLAB_DEBUG_FREE
));
3384 static ssize_t
sanity_checks_store(struct kmem_cache
*s
,
3385 const char *buf
, size_t length
)
3387 s
->flags
&= ~SLAB_DEBUG_FREE
;
3389 s
->flags
|= SLAB_DEBUG_FREE
;
3392 SLAB_ATTR(sanity_checks
);
3394 static ssize_t
trace_show(struct kmem_cache
*s
, char *buf
)
3396 return sprintf(buf
, "%d\n", !!(s
->flags
& SLAB_TRACE
));
3399 static ssize_t
trace_store(struct kmem_cache
*s
, const char *buf
,
3402 s
->flags
&= ~SLAB_TRACE
;
3404 s
->flags
|= SLAB_TRACE
;
3409 static ssize_t
reclaim_account_show(struct kmem_cache
*s
, char *buf
)
3411 return sprintf(buf
, "%d\n", !!(s
->flags
& SLAB_RECLAIM_ACCOUNT
));
3414 static ssize_t
reclaim_account_store(struct kmem_cache
*s
,
3415 const char *buf
, size_t length
)
3417 s
->flags
&= ~SLAB_RECLAIM_ACCOUNT
;
3419 s
->flags
|= SLAB_RECLAIM_ACCOUNT
;
3422 SLAB_ATTR(reclaim_account
);
3424 static ssize_t
hwcache_align_show(struct kmem_cache
*s
, char *buf
)
3426 return sprintf(buf
, "%d\n", !!(s
->flags
& SLAB_HWCACHE_ALIGN
));
3428 SLAB_ATTR_RO(hwcache_align
);
3430 #ifdef CONFIG_ZONE_DMA
3431 static ssize_t
cache_dma_show(struct kmem_cache
*s
, char *buf
)
3433 return sprintf(buf
, "%d\n", !!(s
->flags
& SLAB_CACHE_DMA
));
3435 SLAB_ATTR_RO(cache_dma
);
3438 static ssize_t
destroy_by_rcu_show(struct kmem_cache
*s
, char *buf
)
3440 return sprintf(buf
, "%d\n", !!(s
->flags
& SLAB_DESTROY_BY_RCU
));
3442 SLAB_ATTR_RO(destroy_by_rcu
);
3444 static ssize_t
red_zone_show(struct kmem_cache
*s
, char *buf
)
3446 return sprintf(buf
, "%d\n", !!(s
->flags
& SLAB_RED_ZONE
));
3449 static ssize_t
red_zone_store(struct kmem_cache
*s
,
3450 const char *buf
, size_t length
)
3452 if (any_slab_objects(s
))
3455 s
->flags
&= ~SLAB_RED_ZONE
;
3457 s
->flags
|= SLAB_RED_ZONE
;
3461 SLAB_ATTR(red_zone
);
3463 static ssize_t
poison_show(struct kmem_cache
*s
, char *buf
)
3465 return sprintf(buf
, "%d\n", !!(s
->flags
& SLAB_POISON
));
3468 static ssize_t
poison_store(struct kmem_cache
*s
,
3469 const char *buf
, size_t length
)
3471 if (any_slab_objects(s
))
3474 s
->flags
&= ~SLAB_POISON
;
3476 s
->flags
|= SLAB_POISON
;
3482 static ssize_t
store_user_show(struct kmem_cache
*s
, char *buf
)
3484 return sprintf(buf
, "%d\n", !!(s
->flags
& SLAB_STORE_USER
));
3487 static ssize_t
store_user_store(struct kmem_cache
*s
,
3488 const char *buf
, size_t length
)
3490 if (any_slab_objects(s
))
3493 s
->flags
&= ~SLAB_STORE_USER
;
3495 s
->flags
|= SLAB_STORE_USER
;
3499 SLAB_ATTR(store_user
);
3501 static ssize_t
validate_show(struct kmem_cache
*s
, char *buf
)
3506 static ssize_t
validate_store(struct kmem_cache
*s
,
3507 const char *buf
, size_t length
)
3511 if (buf
[0] == '1') {
3512 ret
= validate_slab_cache(s
);
3518 SLAB_ATTR(validate
);
3520 static ssize_t
shrink_show(struct kmem_cache
*s
, char *buf
)
3525 static ssize_t
shrink_store(struct kmem_cache
*s
,
3526 const char *buf
, size_t length
)
3528 if (buf
[0] == '1') {
3529 int rc
= kmem_cache_shrink(s
);
3539 static ssize_t
alloc_calls_show(struct kmem_cache
*s
, char *buf
)
3541 if (!(s
->flags
& SLAB_STORE_USER
))
3543 return list_locations(s
, buf
, TRACK_ALLOC
);
3545 SLAB_ATTR_RO(alloc_calls
);
3547 static ssize_t
free_calls_show(struct kmem_cache
*s
, char *buf
)
3549 if (!(s
->flags
& SLAB_STORE_USER
))
3551 return list_locations(s
, buf
, TRACK_FREE
);
3553 SLAB_ATTR_RO(free_calls
);
3556 static ssize_t
defrag_ratio_show(struct kmem_cache
*s
, char *buf
)
3558 return sprintf(buf
, "%d\n", s
->defrag_ratio
/ 10);
3561 static ssize_t
defrag_ratio_store(struct kmem_cache
*s
,
3562 const char *buf
, size_t length
)
3564 int n
= simple_strtoul(buf
, NULL
, 10);
3567 s
->defrag_ratio
= n
* 10;
3570 SLAB_ATTR(defrag_ratio
);
3573 static struct attribute
* slab_attrs
[] = {
3574 &slab_size_attr
.attr
,
3575 &object_size_attr
.attr
,
3576 &objs_per_slab_attr
.attr
,
3581 &cpu_slabs_attr
.attr
,
3585 &sanity_checks_attr
.attr
,
3587 &hwcache_align_attr
.attr
,
3588 &reclaim_account_attr
.attr
,
3589 &destroy_by_rcu_attr
.attr
,
3590 &red_zone_attr
.attr
,
3592 &store_user_attr
.attr
,
3593 &validate_attr
.attr
,
3595 &alloc_calls_attr
.attr
,
3596 &free_calls_attr
.attr
,
3597 #ifdef CONFIG_ZONE_DMA
3598 &cache_dma_attr
.attr
,
3601 &defrag_ratio_attr
.attr
,
3606 static struct attribute_group slab_attr_group
= {
3607 .attrs
= slab_attrs
,
3610 static ssize_t
slab_attr_show(struct kobject
*kobj
,
3611 struct attribute
*attr
,
3614 struct slab_attribute
*attribute
;
3615 struct kmem_cache
*s
;
3618 attribute
= to_slab_attr(attr
);
3621 if (!attribute
->show
)
3624 err
= attribute
->show(s
, buf
);
3629 static ssize_t
slab_attr_store(struct kobject
*kobj
,
3630 struct attribute
*attr
,
3631 const char *buf
, size_t len
)
3633 struct slab_attribute
*attribute
;
3634 struct kmem_cache
*s
;
3637 attribute
= to_slab_attr(attr
);
3640 if (!attribute
->store
)
3643 err
= attribute
->store(s
, buf
, len
);
3648 static struct sysfs_ops slab_sysfs_ops
= {
3649 .show
= slab_attr_show
,
3650 .store
= slab_attr_store
,
3653 static struct kobj_type slab_ktype
= {
3654 .sysfs_ops
= &slab_sysfs_ops
,
3657 static int uevent_filter(struct kset
*kset
, struct kobject
*kobj
)
3659 struct kobj_type
*ktype
= get_ktype(kobj
);
3661 if (ktype
== &slab_ktype
)
3666 static struct kset_uevent_ops slab_uevent_ops
= {
3667 .filter
= uevent_filter
,
3670 static decl_subsys(slab
, &slab_ktype
, &slab_uevent_ops
);
3672 #define ID_STR_LENGTH 64
3674 /* Create a unique string id for a slab cache:
3676 * :[flags-]size:[memory address of kmemcache]
3678 static char *create_unique_id(struct kmem_cache
*s
)
3680 char *name
= kmalloc(ID_STR_LENGTH
, GFP_KERNEL
);
3687 * First flags affecting slabcache operations. We will only
3688 * get here for aliasable slabs so we do not need to support
3689 * too many flags. The flags here must cover all flags that
3690 * are matched during merging to guarantee that the id is
3693 if (s
->flags
& SLAB_CACHE_DMA
)
3695 if (s
->flags
& SLAB_RECLAIM_ACCOUNT
)
3697 if (s
->flags
& SLAB_DEBUG_FREE
)
3701 p
+= sprintf(p
, "%07d", s
->size
);
3702 BUG_ON(p
> name
+ ID_STR_LENGTH
- 1);
3706 static int sysfs_slab_add(struct kmem_cache
*s
)
3712 if (slab_state
< SYSFS
)
3713 /* Defer until later */
3716 unmergeable
= slab_unmergeable(s
);
3719 * Slabcache can never be merged so we can use the name proper.
3720 * This is typically the case for debug situations. In that
3721 * case we can catch duplicate names easily.
3723 sysfs_remove_link(&slab_subsys
.kobj
, s
->name
);
3727 * Create a unique name for the slab as a target
3730 name
= create_unique_id(s
);
3733 kobj_set_kset_s(s
, slab_subsys
);
3734 kobject_set_name(&s
->kobj
, name
);
3735 kobject_init(&s
->kobj
);
3736 err
= kobject_add(&s
->kobj
);
3740 err
= sysfs_create_group(&s
->kobj
, &slab_attr_group
);
3743 kobject_uevent(&s
->kobj
, KOBJ_ADD
);
3745 /* Setup first alias */
3746 sysfs_slab_alias(s
, s
->name
);
3752 static void sysfs_slab_remove(struct kmem_cache
*s
)
3754 kobject_uevent(&s
->kobj
, KOBJ_REMOVE
);
3755 kobject_del(&s
->kobj
);
3759 * Need to buffer aliases during bootup until sysfs becomes
3760 * available lest we loose that information.
3762 struct saved_alias
{
3763 struct kmem_cache
*s
;
3765 struct saved_alias
*next
;
3768 static struct saved_alias
*alias_list
;
3770 static int sysfs_slab_alias(struct kmem_cache
*s
, const char *name
)
3772 struct saved_alias
*al
;
3774 if (slab_state
== SYSFS
) {
3776 * If we have a leftover link then remove it.
3778 sysfs_remove_link(&slab_subsys
.kobj
, name
);
3779 return sysfs_create_link(&slab_subsys
.kobj
,
3783 al
= kmalloc(sizeof(struct saved_alias
), GFP_KERNEL
);
3789 al
->next
= alias_list
;
3794 static int __init
slab_sysfs_init(void)
3796 struct kmem_cache
*s
;
3799 err
= subsystem_register(&slab_subsys
);
3801 printk(KERN_ERR
"Cannot register slab subsystem.\n");
3807 list_for_each_entry(s
, &slab_caches
, list
) {
3808 err
= sysfs_slab_add(s
);
3812 while (alias_list
) {
3813 struct saved_alias
*al
= alias_list
;
3815 alias_list
= alias_list
->next
;
3816 err
= sysfs_slab_alias(al
->s
, al
->name
);
3825 __initcall(slab_sysfs_init
);