?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
[PATCH] ppc32: Remove CONFIG_PMAC_PBOOK
[linux-2.6/linux-2.6-openrd.git] / sound / oss / dmasound / dmasound_awacs.c
blob2704e1598addd4438a9bb1bd7d8b0c1611e1d08b
1 /*
2 * linux/sound/oss/dmasound/dmasound_awacs.c
3 *
4 * PowerMac `AWACS' and `Burgundy' DMA Sound Driver
5 * with some limited support for DACA & Tumbler
6 *
7 * See linux/sound/oss/dmasound/dmasound_core.c for copyright and
8 * history prior to 2001/01/26.
9 *
10 * 26/01/2001 ed 0.1 Iain Sandoe
11 * - added version info.
12 * - moved dbdma command buffer allocation to PMacXXXSqSetup()
13 * - fixed up beep dbdma cmd buffers
14 *
15 * 08/02/2001 [0.2]
16 * - make SNDCTL_DSP_GETFMTS return the correct info for the h/w
17 * - move soft format translations to a separate file
18 * - [0.3] make SNDCTL_DSP_GETCAPS return correct info.
19 * - [0.4] more informative machine name strings.
20 * - [0.5]
21 * - record changes.
22 * - made the default_hard/soft entries.
23 * 04/04/2001 [0.6]
24 * - minor correction to bit assignments in awacs_defs.h
25 * - incorporate mixer changes from 2.2.x back-port.
26 * - take out passthru as a rec input (it isn't).
27 * - make Input Gain slider work the 'right way up'.
28 * - try to make the mixer sliders more logical - so now the
29 * input selectors are just two-state (>50% == ON) and the
30 * Input Gain slider handles the rest of the gain issues.
31 * - try to pick slider representations that most closely match
32 * the actual use - e.g. IGain for input gain...
33 * - first stab at over/under-run detection.
34 * - minor cosmetic changes to IRQ identification.
35 * - fix bug where rates > max would be reported as supported.
36 * - first stab at over/under-run detection.
37 * - make use of i2c for mixer settings conditional on perch
38 * rather than cuda (some machines without perch have cuda).
39 * - fix bug where TX stops when dbdma status comes up "DEAD"
40 * so far only reported on PowerComputing clones ... but.
41 * - put in AWACS/Screamer register write timeouts.
42 * - part way to partitioning the init() stuff
43 * - first pass at 'tumbler' stuff (not support - just an attempt
44 * to allow the driver to load on new G4s).
45 * 01/02/2002 [0.7] - BenH
46 * - all sort of minor bits went in since the latest update, I
47 * bumped the version number for that reason
48 *
49 * 07/26/2002 [0.8] - BenH
50 * - More minor bits since last changelog (I should be more careful
51 * with those)
52 * - Support for snapper & better tumbler integration by Toby Sargeant
53 * - Headphone detect for scremer by Julien Blache
54 * - More tumbler fixed by Andreas Schwab
55 * 11/29/2003 [0.8.1] - Renzo Davoli (King Enzo)
56 * - Support for Snapper line in
57 * - snapper input resampling (for rates < 44100)
58 * - software line gain control
59 */
60
61 /* GENERAL FIXME/TODO: check that the assumptions about what is written to
62 mac-io is valid for DACA & Tumbler.
63
64 This driver is in bad need of a rewrite. The dbdma code has to be split,
65 some proper device-tree parsing code has to be written, etc...
66 */
67
68 #include <linux/types.h>
69 #include <linux/module.h>
70 #include <linux/config.h>
71 #include <linux/slab.h>
72 #include <linux/init.h>
73 #include <linux/delay.h>
74 #include <linux/soundcard.h>
75 #include <linux/adb.h>
76 #include <linux/nvram.h>
77 #include <linux/tty.h>
78 #include <linux/vt_kern.h>
79 #include <linux/spinlock.h>
80 #include <linux/kmod.h>
81 #include <linux/interrupt.h>
82 #include <linux/input.h>
83 #include <asm/semaphore.h>
84 #ifdef CONFIG_ADB_CUDA
85 #include <linux/cuda.h>
86 #endif
87 #ifdef CONFIG_ADB_PMU
88 #include <linux/pmu.h>
89 #endif
90
91 #include <linux/i2c-dev.h>
92
93 #include <asm/uaccess.h>
94 #include <asm/prom.h>
95 #include <asm/machdep.h>
96 #include <asm/io.h>
97 #include <asm/dbdma.h>
98 #include <asm/pmac_feature.h>
99 #include <asm/irq.h>
100 #include <asm/nvram.h>
101
102 #include "awacs_defs.h"
103 #include "dmasound.h"
104 #include "tas3001c.h"
105 #include "tas3004.h"
106 #include "tas_common.h"
107
108 #define DMASOUND_AWACS_REVISION 0
109 #define DMASOUND_AWACS_EDITION 7
110
111 #define AWACS_SNAPPER 110 /* fake revision # for snapper */
112 #define AWACS_BURGUNDY 100 /* fake revision # for burgundy */
113 #define AWACS_TUMBLER 90 /* fake revision # for tumbler */
114 #define AWACS_DACA 80 /* fake revision # for daca (ibook) */
115 #define AWACS_AWACS 2 /* holding revision for AWACS */
116 #define AWACS_SCREAMER 3 /* holding revision for Screamer */
117 /*
118 * Interrupt numbers and addresses, & info obtained from the device tree.
119 */
120 static int awacs_irq, awacs_tx_irq, awacs_rx_irq;
121 static volatile struct awacs_regs __iomem *awacs;
122 static volatile u32 __iomem *i2s;
123 static volatile struct dbdma_regs __iomem *awacs_txdma, *awacs_rxdma;
124 static int awacs_rate_index;
125 static int awacs_subframe;
126 static struct device_node* awacs_node;
127 static struct device_node* i2s_node;
128
129 static char awacs_name[64];
130 static int awacs_revision;
131 static int awacs_sleeping;
132 static DECLARE_MUTEX(dmasound_sem);
133
134 static int sound_device_id; /* exists after iMac revA */
135 static int hw_can_byteswap = 1 ; /* most pmac sound h/w can */
136
137 /* model info */
138 /* To be replaced with better interaction with pmac_feature.c */
139 static int is_pbook_3X00;
140 static int is_pbook_g3;
141
142 /* expansion info */
143 static int has_perch;
144 static int has_ziva;
145
146 /* for earlier powerbooks which need fiddling with mac-io to enable
147 * cd etc.
148 */
149 static unsigned char __iomem *latch_base;
150 static unsigned char __iomem *macio_base;
151
152 /*
153 * Space for the DBDMA command blocks.
154 */
155 static void *awacs_tx_cmd_space;
156 static volatile struct dbdma_cmd *awacs_tx_cmds;
157 static int number_of_tx_cmd_buffers;
158
159 static void *awacs_rx_cmd_space;
160 static volatile struct dbdma_cmd *awacs_rx_cmds;
161 static int number_of_rx_cmd_buffers;
162
163 /*
164 * Cached values of AWACS registers (we can't read them).
165 * Except on the burgundy (and screamer). XXX
166 */
167
168 int awacs_reg[8];
169 int awacs_reg1_save;
170
171 /* tracking values for the mixer contents
172 */
173
174 static int spk_vol;
175 static int line_vol;
176 static int passthru_vol;
177
178 static int ip_gain; /* mic preamp settings */
179 static int rec_lev = 0x4545 ; /* default CD gain 69 % */
180 static int mic_lev;
181 static int cd_lev = 0x6363 ; /* 99 % */
182 static int line_lev;
183
184 static int hdp_connected;
185
186 /*
187 * Stuff for outputting a beep. The values range from -327 to +327
188 * so we can multiply by an amplitude in the range 0..100 to get a
189 * signed short value to put in the output buffer.
190 */
191 static short beep_wform[256] = {
192 0, 40, 79, 117, 153, 187, 218, 245,
193 269, 288, 304, 316, 323, 327, 327, 324,
194 318, 310, 299, 288, 275, 262, 249, 236,
195 224, 213, 204, 196, 190, 186, 183, 182,
196 182, 183, 186, 189, 192, 196, 200, 203,
197 206, 208, 209, 209, 209, 207, 204, 201,
198 197, 193, 188, 183, 179, 174, 170, 166,
199 163, 161, 160, 159, 159, 160, 161, 162,
200 164, 166, 168, 169, 171, 171, 171, 170,
201 169, 167, 163, 159, 155, 150, 144, 139,
202 133, 128, 122, 117, 113, 110, 107, 105,
203 103, 103, 103, 103, 104, 104, 105, 105,
204 105, 103, 101, 97, 92, 86, 78, 68,
205 58, 45, 32, 18, 3, -11, -26, -41,
206 -55, -68, -79, -88, -95, -100, -102, -102,
207 -99, -93, -85, -75, -62, -48, -33, -16,
208 0, 16, 33, 48, 62, 75, 85, 93,
209 99, 102, 102, 100, 95, 88, 79, 68,
210 55, 41, 26, 11, -3, -18, -32, -45,
211 -58, -68, -78, -86, -92, -97, -101, -103,
212 -105, -105, -105, -104, -104, -103, -103, -103,
213 -103, -105, -107, -110, -113, -117, -122, -128,
214 -133, -139, -144, -150, -155, -159, -163, -167,
215 -169, -170, -171, -171, -171, -169, -168, -166,
216 -164, -162, -161, -160, -159, -159, -160, -161,
217 -163, -166, -170, -174, -179, -183, -188, -193,
218 -197, -201, -204, -207, -209, -209, -209, -208,
219 -206, -203, -200, -196, -192, -189, -186, -183,
220 -182, -182, -183, -186, -190, -196, -204, -213,
221 -224, -236, -249, -262, -275, -288, -299, -310,
222 -318, -324, -327, -327, -323, -316, -304, -288,
223 -269, -245, -218, -187, -153, -117, -79, -40,
224 };
225
226 /* beep support */
227 #define BEEP_SRATE 22050 /* 22050 Hz sample rate */
228 #define BEEP_BUFLEN 512
229 #define BEEP_VOLUME 15 /* 0 - 100 */
230
231 static int beep_vol = BEEP_VOLUME;
232 static int beep_playing;
233 static int awacs_beep_state;
234 static short *beep_buf;
235 static void *beep_dbdma_cmd_space;
236 static volatile struct dbdma_cmd *beep_dbdma_cmd;
237
238 /* Burgundy functions */
239 static void awacs_burgundy_wcw(unsigned addr,unsigned newval);
240 static unsigned awacs_burgundy_rcw(unsigned addr);
241 static void awacs_burgundy_write_volume(unsigned address, int volume);
242 static int awacs_burgundy_read_volume(unsigned address);
243 static void awacs_burgundy_write_mvolume(unsigned address, int volume);
244 static int awacs_burgundy_read_mvolume(unsigned address);
245
246 /* we will allocate a single 'emergency' dbdma cmd block to use if the
247 tx status comes up "DEAD". This happens on some PowerComputing Pmac
248 clones, either owing to a bug in dbdma or some interaction between
249 IDE and sound. However, this measure would deal with DEAD status if
250 if appeared elsewhere.
251
252 for the sake of memory efficiency we'll allocate this cmd as part of
253 the beep cmd stuff.
254 */
255
256 static volatile struct dbdma_cmd *emergency_dbdma_cmd;
257
258 #ifdef CONFIG_PM
259 /*
260 * Stuff for restoring after a sleep.
261 */
262 static int awacs_sleep_notify(struct pmu_sleep_notifier *self, int when);
263 struct pmu_sleep_notifier awacs_sleep_notifier = {
264 awacs_sleep_notify, SLEEP_LEVEL_SOUND,
265 };
266 #endif /* CONFIG_PM */
267
268 /* for (soft) sample rate translations */
269 int expand_bal; /* Balance factor for expanding (not volume!) */
270 int expand_read_bal; /* Balance factor for expanding reads (not volume!) */
271
272 /*** Low level stuff *********************************************************/
273
274 static void *PMacAlloc(unsigned int size, int flags);
275 static void PMacFree(void *ptr, unsigned int size);
276 static int PMacIrqInit(void);
277 #ifdef MODULE
278 static void PMacIrqCleanup(void);
279 #endif
280 static void PMacSilence(void);
281 static void PMacInit(void);
282 static int PMacSetFormat(int format);
283 static int PMacSetVolume(int volume);
284 static void PMacPlay(void);
285 static void PMacRecord(void);
286 static irqreturn_t pmac_awacs_tx_intr(int irq, void *devid, struct pt_regs *regs);
287 static irqreturn_t pmac_awacs_rx_intr(int irq, void *devid, struct pt_regs *regs);
288 static irqreturn_t pmac_awacs_intr(int irq, void *devid, struct pt_regs *regs);
289 static void awacs_write(int val);
290 static int awacs_get_volume(int reg, int lshift);
291 static int awacs_volume_setter(int volume, int n, int mute, int lshift);
292
293
294 /*** Mid level stuff **********************************************************/
295
296 static int PMacMixerIoctl(u_int cmd, u_long arg);
297 static int PMacWriteSqSetup(void);
298 static int PMacReadSqSetup(void);
299 static void PMacAbortRead(void);
300
301 extern TRANS transAwacsNormal ;
302 extern TRANS transAwacsExpand ;
303 extern TRANS transAwacsNormalRead ;
304 extern TRANS transAwacsExpandRead ;
305
306 extern int daca_init(void);
307 extern void daca_cleanup(void);
308 extern int daca_set_volume(uint left_vol, uint right_vol);
309 extern void daca_get_volume(uint * left_vol, uint *right_vol);
310 extern int daca_enter_sleep(void);
311 extern int daca_leave_sleep(void);
312
313 #define TRY_LOCK() \
314 if ((rc = down_interruptible(&dmasound_sem)) != 0) \
315 return rc;
316 #define LOCK() down(&dmasound_sem);
317
318 #define UNLOCK() up(&dmasound_sem);
319
320 /* We use different versions that the ones provided in dmasound.h
321 *
322 * FIXME: Use different names ;)
323 */
324 #undef IOCTL_IN
325 #undef IOCTL_OUT
326
327 #define IOCTL_IN(arg, ret) \
328 rc = get_user(ret, (int __user *)(arg)); \
329 if (rc) break;
330 #define IOCTL_OUT(arg, ret) \
331 ioctl_return2((int __user *)(arg), ret)
332
333 static inline int ioctl_return2(int __user *addr, int value)
334 {
335 return value < 0 ? value : put_user(value, addr);
336 }
337
338
339 /*** AE - TUMBLER / SNAPPER START ************************************************/
340
341
342 int gpio_audio_reset, gpio_audio_reset_pol;
343 int gpio_amp_mute, gpio_amp_mute_pol;
344 int gpio_headphone_mute, gpio_headphone_mute_pol;
345 int gpio_headphone_detect, gpio_headphone_detect_pol;
346 int gpio_headphone_irq;
347
348 int
349 setup_audio_gpio(const char *name, const char* compatible, int *gpio_addr, int* gpio_pol)
350 {
351 struct device_node *np;
352 u32* pp;
353
354 np = find_devices("gpio");
355 if (!np)
356 return -ENODEV;
357
358 np = np->child;
359 while(np != 0) {
360 if (name) {
361 char *property = get_property(np,"audio-gpio",NULL);
362 if (property != 0 && strcmp(property,name) == 0)
363 break;
364 } else if (compatible && device_is_compatible(np, compatible))
365 break;
366 np = np->sibling;
367 }
368 if (!np)
369 return -ENODEV;
370 pp = (u32 *)get_property(np, "AAPL,address", NULL);
371 if (!pp)
372 return -ENODEV;
373 *gpio_addr = (*pp) & 0x0000ffff;
374 pp = (u32 *)get_property(np, "audio-gpio-active-state", NULL);
375 if (pp)
376 *gpio_pol = *pp;
377 else
378 *gpio_pol = 1;
379 if (np->n_intrs > 0)
380 return np->intrs[0].line;
381
382 return 0;
383 }
384
385 static inline void
386 write_audio_gpio(int gpio_addr, int data)
387 {
388 if (!gpio_addr)
389 return;
390 pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, gpio_addr, data ? 0x05 : 0x04);
391 }
392
393 static inline int
394 read_audio_gpio(int gpio_addr)
395 {
396 if (!gpio_addr)
397 return 0;
398 return ((pmac_call_feature(PMAC_FTR_READ_GPIO, NULL, gpio_addr, 0) & 0x02) !=0);
399 }
400
401 /*
402 * Headphone interrupt via GPIO (Tumbler, Snapper, DACA)
403 */
404 static irqreturn_t
405 headphone_intr(int irq, void *devid, struct pt_regs *regs)
406 {
407 unsigned long flags;
408
409 spin_lock_irqsave(&dmasound.lock, flags);
410 if (read_audio_gpio(gpio_headphone_detect) == gpio_headphone_detect_pol) {
411 printk(KERN_INFO "Audio jack plugged, muting speakers.\n");
412 write_audio_gpio(gpio_headphone_mute, !gpio_headphone_mute_pol);
413 write_audio_gpio(gpio_amp_mute, gpio_amp_mute_pol);
414 tas_output_device_change(sound_device_id,TAS_OUTPUT_HEADPHONES,0);
415 } else {
416 printk(KERN_INFO "Audio jack unplugged, enabling speakers.\n");
417 write_audio_gpio(gpio_amp_mute, !gpio_amp_mute_pol);
418 write_audio_gpio(gpio_headphone_mute, gpio_headphone_mute_pol);
419 tas_output_device_change(sound_device_id,TAS_OUTPUT_INTERNAL_SPKR,0);
420 }
421 spin_unlock_irqrestore(&dmasound.lock, flags);
422 return IRQ_HANDLED;
423 }
424
425
426 /* Initialize tumbler */
427
428 static int
429 tas_dmasound_init(void)
430 {
431 setup_audio_gpio(
432 "audio-hw-reset",
433 NULL,
434 &gpio_audio_reset,
435 &gpio_audio_reset_pol);
436 setup_audio_gpio(
437 "amp-mute",
438 NULL,
439 &gpio_amp_mute,
440 &gpio_amp_mute_pol);
441 setup_audio_gpio("headphone-mute",
442 NULL,
443 &gpio_headphone_mute,
444 &gpio_headphone_mute_pol);
445 gpio_headphone_irq = setup_audio_gpio(
446 "headphone-detect",
447 NULL,
448 &gpio_headphone_detect,
449 &gpio_headphone_detect_pol);
450 /* Fix some broken OF entries in desktop machines */
451 if (!gpio_headphone_irq)
452 gpio_headphone_irq = setup_audio_gpio(
453 NULL,
454 "keywest-gpio15",
455 &gpio_headphone_detect,
456 &gpio_headphone_detect_pol);
457
458 write_audio_gpio(gpio_audio_reset, gpio_audio_reset_pol);
459 msleep(100);
460 write_audio_gpio(gpio_audio_reset, !gpio_audio_reset_pol);
461 msleep(100);
462 if (gpio_headphone_irq) {
463 if (request_irq(gpio_headphone_irq,headphone_intr,0,"Headphone detect",NULL) < 0) {
464 printk(KERN_ERR "tumbler: Can't request headphone interrupt\n");
465 gpio_headphone_irq = 0;
466 } else {
467 u8 val;
468 /* Activate headphone status interrupts */
469 val = pmac_call_feature(PMAC_FTR_READ_GPIO, NULL, gpio_headphone_detect, 0);
470 pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, gpio_headphone_detect, val | 0x80);
471 /* Trigger it */
472 headphone_intr(0,NULL,NULL);
473 }
474 }
475 if (!gpio_headphone_irq) {
476 /* Some machine enter this case ? */
477 printk(KERN_WARNING "tumbler: Headphone detect IRQ not found, enabling all outputs !\n");
478 write_audio_gpio(gpio_amp_mute, !gpio_amp_mute_pol);
479 write_audio_gpio(gpio_headphone_mute, !gpio_headphone_mute_pol);
480 }
481 return 0;
482 }
483
484
485 static int
486 tas_dmasound_cleanup(void)
487 {
488 if (gpio_headphone_irq)
489 free_irq(gpio_headphone_irq, NULL);
490 return 0;
491 }
492
493 /* We don't support 48k yet */
494 static int tas_freqs[1] = { 44100 } ;
495 static int tas_freqs_ok[1] = { 1 } ;
496
497 /* don't know what to do really - just have to leave it where
498 * OF left things
499 */
500
501 static int
502 tas_set_frame_rate(void)
503 {
504 if (i2s) {
505 out_le32(i2s + (I2S_REG_SERIAL_FORMAT >> 2), 0x41190000);
506 out_le32(i2s + (I2S_REG_DATAWORD_SIZES >> 2), 0x02000200);
507 }
508 dmasound.hard.speed = 44100 ;
509 awacs_rate_index = 0 ;
510 return 44100 ;
511 }
512
513 static int
514 tas_mixer_ioctl(u_int cmd, u_long arg)
515 {
516 int __user *argp = (int __user *)arg;
517 int data;
518 int rc;
519
520 rc=tas_device_ioctl(cmd, arg);
521 if (rc != -EINVAL) {
522 return rc;
523 }
524
525 if ((cmd & ~0xff) == MIXER_WRITE(0) &&
526 tas_supported_mixers() & (1<<(cmd & 0xff))) {
527 rc = get_user(data, argp);
528 if (rc<0) return rc;
529 tas_set_mixer_level(cmd & 0xff, data);
530 tas_get_mixer_level(cmd & 0xff, &data);
531 return ioctl_return2(argp, data);
532 }
533 if ((cmd & ~0xff) == MIXER_READ(0) &&
534 tas_supported_mixers() & (1<<(cmd & 0xff))) {
535 tas_get_mixer_level(cmd & 0xff, &data);
536 return ioctl_return2(argp, data);
537 }
538
539 switch(cmd) {
540 case SOUND_MIXER_READ_DEVMASK:
541 data = tas_supported_mixers() | SOUND_MASK_SPEAKER;
542 rc = IOCTL_OUT(arg, data);
543 break;
544 case SOUND_MIXER_READ_STEREODEVS:
545 data = tas_stereo_mixers();
546 rc = IOCTL_OUT(arg, data);
547 break;
548 case SOUND_MIXER_READ_CAPS:
549 rc = IOCTL_OUT(arg, 0);
550 break;
551 case SOUND_MIXER_READ_RECMASK:
552 // XXX FIXME: find a way to check what is really available */
553 data = SOUND_MASK_LINE | SOUND_MASK_MIC;
554 rc = IOCTL_OUT(arg, data);
555 break;
556 case SOUND_MIXER_READ_RECSRC:
557 if (awacs_reg[0] & MASK_MUX_AUDIN)
558 data |= SOUND_MASK_LINE;
559 if (awacs_reg[0] & MASK_MUX_MIC)
560 data |= SOUND_MASK_MIC;
561 rc = IOCTL_OUT(arg, data);
562 break;
563 case SOUND_MIXER_WRITE_RECSRC:
564 IOCTL_IN(arg, data);
565 data =0;
566 rc = IOCTL_OUT(arg, data);
567 break;
568 case SOUND_MIXER_WRITE_SPEAKER: /* really bell volume */
569 IOCTL_IN(arg, data);
570 beep_vol = data & 0xff;
571 /* fall through */
572 case SOUND_MIXER_READ_SPEAKER:
573 rc = IOCTL_OUT(arg, (beep_vol<<8) | beep_vol);
574 break;
575 case SOUND_MIXER_OUTMASK:
576 case SOUND_MIXER_OUTSRC:
577 default:
578 rc = -EINVAL;
579 }
580
581 return rc;
582 }
583
584 static void __init
585 tas_init_frame_rates(unsigned int *prop, unsigned int l)
586 {
587 int i ;
588 if (prop) {
589 for (i=0; i<1; i++)
590 tas_freqs_ok[i] = 0;
591 for (l /= sizeof(int); l > 0; --l) {
592 unsigned int r = *prop++;
593 /* Apple 'Fixed' format */
594 if (r >= 0x10000)
595 r >>= 16;
596 for (i = 0; i < 1; ++i) {
597 if (r == tas_freqs[i]) {
598 tas_freqs_ok[i] = 1;
599 break;
600 }
601 }
602 }
603 }
604 /* else we assume that all the rates are available */
605 }
606
607
608 /*** AE - TUMBLER / SNAPPER END ************************************************/
609
610
611
612 /*** Low level stuff *********************************************************/
613
614 /*
615 * PCI PowerMac, with AWACS, Screamer, Burgundy, DACA or Tumbler and DBDMA.
616 */
617 static void *PMacAlloc(unsigned int size, int flags)
618 {
619 return kmalloc(size, flags);
620 }
621
622 static void PMacFree(void *ptr, unsigned int size)
623 {
624 kfree(ptr);
625 }
626
627 static int __init PMacIrqInit(void)
628 {
629 if (awacs)
630 if (request_irq(awacs_irq, pmac_awacs_intr, 0, "Built-in Sound misc", NULL))
631 return 0;
632 if (request_irq(awacs_tx_irq, pmac_awacs_tx_intr, 0, "Built-in Sound out", NULL)
633 || request_irq(awacs_rx_irq, pmac_awacs_rx_intr, 0, "Built-in Sound in", NULL))
634 return 0;
635 return 1;
636 }
637
638 #ifdef MODULE
639 static void PMacIrqCleanup(void)
640 {
641 /* turn off input & output dma */
642 DBDMA_DO_STOP(awacs_txdma);
643 DBDMA_DO_STOP(awacs_rxdma);
644
645 if (awacs)
646 /* disable interrupts from awacs interface */
647 out_le32(&awacs->control, in_le32(&awacs->control) & 0xfff);
648
649 /* Switch off the sound clock */
650 pmac_call_feature(PMAC_FTR_SOUND_CHIP_ENABLE, awacs_node, 0, 0);
651 /* Make sure proper bits are set on pismo & tipb */
652 if ((machine_is_compatible("PowerBook3,1") ||
653 machine_is_compatible("PowerBook3,2")) && awacs) {
654 awacs_reg[1] |= MASK_PAROUT0 | MASK_PAROUT1;
655 awacs_write(MASK_ADDR1 | awacs_reg[1]);
656 msleep(200);
657 }
658 if (awacs)
659 free_irq(awacs_irq, NULL);
660 free_irq(awacs_tx_irq, NULL);
661 free_irq(awacs_rx_irq, NULL);
662
663 if (awacs)
664 iounmap(awacs);
665 if (i2s)
666 iounmap(i2s);
667 iounmap(awacs_txdma);
668 iounmap(awacs_rxdma);
669
670 release_OF_resource(awacs_node, 0);
671 release_OF_resource(awacs_node, 1);
672 release_OF_resource(awacs_node, 2);
673
674 kfree(awacs_tx_cmd_space);
675 kfree(awacs_rx_cmd_space);
676 kfree(beep_dbdma_cmd_space);
677 kfree(beep_buf);
678 #ifdef CONFIG_PM
679 pmu_unregister_sleep_notifier(&awacs_sleep_notifier);
680 #endif
681 }
682 #endif /* MODULE */
683
684 static void PMacSilence(void)
685 {
686 /* turn off output dma */
687 DBDMA_DO_STOP(awacs_txdma);
688 }
689
690 /* don't know what to do really - just have to leave it where
691 * OF left things
692 */
693
694 static int daca_set_frame_rate(void)
695 {
696 if (i2s) {
697 out_le32(i2s + (I2S_REG_SERIAL_FORMAT >> 2), 0x41190000);
698 out_le32(i2s + (I2S_REG_DATAWORD_SIZES >> 2), 0x02000200);
699 }
700 dmasound.hard.speed = 44100 ;
701 awacs_rate_index = 0 ;
702 return 44100 ;
703 }
704
705 static int awacs_freqs[8] = {
706 44100, 29400, 22050, 17640, 14700, 11025, 8820, 7350
707 };
708 static int awacs_freqs_ok[8] = { 1, 1, 1, 1, 1, 1, 1, 1 };
709
710 static int
711 awacs_set_frame_rate(int desired, int catch_r)
712 {
713 int tolerance, i = 8 ;
714 /*
715 * If we have a sample rate which is within catchRadius percent
716 * of the requested value, we don't have to expand the samples.
717 * Otherwise choose the next higher rate.
718 * N.B.: burgundy awacs only works at 44100 Hz.
719 */
720 do {
721 tolerance = catch_r * awacs_freqs[--i] / 100;
722 if (awacs_freqs_ok[i]
723 && dmasound.soft.speed <= awacs_freqs[i] + tolerance)
724 break;
725 } while (i > 0);
726 dmasound.hard.speed = awacs_freqs[i];
727 awacs_rate_index = i;
728
729 out_le32(&awacs->control, MASK_IEPC | (i << 8) | 0x11 );
730 awacs_reg[1] = (awacs_reg[1] & ~MASK_SAMPLERATE) | (i << 3);
731 awacs_write(awacs_reg[1] | MASK_ADDR1);
732 return dmasound.hard.speed;
733 }
734
735 static int
736 burgundy_set_frame_rate(void)
737 {
738 awacs_rate_index = 0 ;
739 awacs_reg[1] = (awacs_reg[1] & ~MASK_SAMPLERATE) ;
740 /* XXX disable error interrupt on burgundy for now */
741 out_le32(&awacs->control, MASK_IEPC | 0 | 0x11 | MASK_IEE);
742 return 44100 ;
743 }
744
745 static int
746 set_frame_rate(int desired, int catch_r)
747 {
748 switch (awacs_revision) {
749 case AWACS_BURGUNDY:
750 dmasound.hard.speed = burgundy_set_frame_rate();
751 break ;
752 case AWACS_TUMBLER:
753 case AWACS_SNAPPER:
754 dmasound.hard.speed = tas_set_frame_rate();
755 break ;
756 case AWACS_DACA:
757 dmasound.hard.speed =
758 daca_set_frame_rate();
759 break ;
760 default:
761 dmasound.hard.speed = awacs_set_frame_rate(desired,
762 catch_r);
763 break ;
764 }
765 return dmasound.hard.speed ;
766 }
767
768 static void
769 awacs_recalibrate(void)
770 {
771 /* Sorry for the horrible delays... I hope to get that improved
772 * by making the whole PM process asynchronous in a future version
773 */
774 msleep(750);
775 awacs_reg[1] |= MASK_CMUTE | MASK_AMUTE;
776 awacs_write(awacs_reg[1] | MASK_RECALIBRATE | MASK_ADDR1);
777 msleep(1000);
778 awacs_write(awacs_reg[1] | MASK_ADDR1);
779 }
780
781 static void PMacInit(void)
782 {
783 int tolerance;
784
785 switch (dmasound.soft.format) {
786 case AFMT_S16_LE:
787 case AFMT_U16_LE:
788 if (hw_can_byteswap)
789 dmasound.hard.format = AFMT_S16_LE;
790 else
791 dmasound.hard.format = AFMT_S16_BE;
792 break;
793 default:
794 dmasound.hard.format = AFMT_S16_BE;
795 break;
796 }
797 dmasound.hard.stereo = 1;
798 dmasound.hard.size = 16;
799
800 /* set dmasound.hard.speed - on the basis of what we want (soft)
801 * and the tolerance we'll allow.
802 */
803 set_frame_rate(dmasound.soft.speed, catchRadius) ;
804
805 tolerance = (catchRadius * dmasound.hard.speed) / 100;
806 if (dmasound.soft.speed >= dmasound.hard.speed - tolerance) {
807 dmasound.trans_write = &transAwacsNormal;
808 dmasound.trans_read = &transAwacsNormalRead;
809 } else {
810 dmasound.trans_write = &transAwacsExpand;
811 dmasound.trans_read = &transAwacsExpandRead;
812 }
813
814 if (awacs) {
815 if (hw_can_byteswap && (dmasound.hard.format == AFMT_S16_LE))
816 out_le32(&awacs->byteswap, BS_VAL);
817 else
818 out_le32(&awacs->byteswap, 0);
819 }
820
821 expand_bal = -dmasound.soft.speed;
822 expand_read_bal = -dmasound.soft.speed;
823 }
824
825 static int PMacSetFormat(int format)
826 {
827 int size;
828 int req_format = format;
829
830 switch (format) {
831 case AFMT_QUERY:
832 return dmasound.soft.format;
833 case AFMT_MU_LAW:
834 case AFMT_A_LAW:
835 case AFMT_U8:
836 case AFMT_S8:
837 size = 8;
838 break;
839 case AFMT_S16_LE:
840 if(!hw_can_byteswap)
841 format = AFMT_S16_BE;
842 case AFMT_S16_BE:
843 size = 16;
844 break;
845 case AFMT_U16_LE:
846 if(!hw_can_byteswap)
847 format = AFMT_U16_BE;
848 case AFMT_U16_BE:
849 size = 16;
850 break;
851 default: /* :-) */
852 printk(KERN_ERR "dmasound: unknown format 0x%x, using AFMT_U8\n",
853 format);
854 size = 8;
855 format = AFMT_U8;
856 }
857
858 if (req_format == format) {
859 dmasound.soft.format = format;
860 dmasound.soft.size = size;
861 if (dmasound.minDev == SND_DEV_DSP) {
862 dmasound.dsp.format = format;
863 dmasound.dsp.size = size;
864 }
865 }
866
867 return format;
868 }
869
870 #define AWACS_VOLUME_TO_MASK(x) (15 - ((((x) - 1) * 15) / 99))
871 #define AWACS_MASK_TO_VOLUME(y) (100 - ((y) * 99 / 15))
872
873 static int awacs_get_volume(int reg, int lshift)
874 {
875 int volume;
876
877 volume = AWACS_MASK_TO_VOLUME((reg >> lshift) & 0xf);
878 volume |= AWACS_MASK_TO_VOLUME(reg & 0xf) << 8;
879 return volume;
880 }
881
882 static int awacs_volume_setter(int volume, int n, int mute, int lshift)
883 {
884 int r1, rn;
885
886 if (mute && volume == 0) {
887 r1 = awacs_reg[1] | mute;
888 } else {
889 r1 = awacs_reg[1] & ~mute;
890 rn = awacs_reg[n] & ~(0xf | (0xf << lshift));
891 rn |= ((AWACS_VOLUME_TO_MASK(volume & 0xff) & 0xf) << lshift);
892 rn |= AWACS_VOLUME_TO_MASK((volume >> 8) & 0xff) & 0xf;
893 awacs_reg[n] = rn;
894 awacs_write((n << 12) | rn);
895 volume = awacs_get_volume(rn, lshift);
896 }
897 if (r1 != awacs_reg[1]) {
898 awacs_reg[1] = r1;
899 awacs_write(r1 | MASK_ADDR1);
900 }
901 return volume;
902 }
903
904 static int PMacSetVolume(int volume)
905 {
906 printk(KERN_WARNING "Bogus call to PMacSetVolume !\n");
907 return 0;
908 }
909
910 static void awacs_setup_for_beep(int speed)
911 {
912 out_le32(&awacs->control,
913 (in_le32(&awacs->control) & ~0x1f00)
914 | ((speed > 0 ? speed : awacs_rate_index) << 8));
915
916 if (hw_can_byteswap && (dmasound.hard.format == AFMT_S16_LE) && speed == -1)
917 out_le32(&awacs->byteswap, BS_VAL);
918 else
919 out_le32(&awacs->byteswap, 0);
920 }
921
922 /* CHECK: how much of this *really* needs IRQs masked? */
923 static void __PMacPlay(void)
924 {
925 volatile struct dbdma_cmd *cp;
926 int next_frg, count;
927
928 count = 300 ; /* > two cycles at the lowest sample rate */
929
930 /* what we want to send next */
931 next_frg = (write_sq.front + write_sq.active) % write_sq.max_count;
932
933 if (awacs_beep_state) {
934 /* sound takes precedence over beeps */
935 /* stop the dma channel */
936 out_le32(&awacs_txdma->control, (RUN|PAUSE|FLUSH|WAKE) << 16);
937 while ( (in_le32(&awacs_txdma->status) & RUN) && count--)
938 udelay(1);
939 if (awacs)
940 awacs_setup_for_beep(-1);
941 out_le32(&awacs_txdma->cmdptr,
942 virt_to_bus(&(awacs_tx_cmds[next_frg])));
943
944 beep_playing = 0;
945 awacs_beep_state = 0;
946 }
947 /* this won't allow more than two frags to be in the output queue at
948 once. (or one, if the max frags is 2 - because count can't exceed
949 2 in that case)
950 */
951 while (write_sq.active < 2 && write_sq.active < write_sq.count) {
952 count = (write_sq.count == write_sq.active + 1) ?
953 write_sq.rear_size:write_sq.block_size ;
954 if (count < write_sq.block_size) {
955 if (!write_sq.syncing) /* last block not yet filled,*/
956 break; /* and we're not syncing or POST-ed */
957 else {
958 /* pretend the block is full to force a new
959 block to be started on the next write */
960 write_sq.rear_size = write_sq.block_size ;
961 write_sq.syncing &= ~2 ; /* clear POST */
962 }
963 }
964 cp = &awacs_tx_cmds[next_frg];
965 st_le16(&cp->req_count, count);
966 st_le16(&cp->xfer_status, 0);
967 st_le16(&cp->command, OUTPUT_MORE + INTR_ALWAYS);
968 /* put a STOP at the end of the queue - but only if we have
969 space for it. This means that, if we under-run and we only
970 have two fragments, we might re-play sound from an existing
971 queued frag. I guess the solution to that is not to set two
972 frags if you are likely to under-run...
973 */
974 if (write_sq.count < write_sq.max_count) {
975 if (++next_frg >= write_sq.max_count)
976 next_frg = 0 ; /* wrap */
977 /* if we get here then we've underrun so we will stop*/
978 st_le16(&awacs_tx_cmds[next_frg].command, DBDMA_STOP);
979 }
980 /* set the dbdma controller going, if it is not already */
981 if (write_sq.active == 0)
982 out_le32(&awacs_txdma->cmdptr, virt_to_bus(cp));
983 (void)in_le32(&awacs_txdma->status);
984 out_le32(&awacs_txdma->control, ((RUN|WAKE) << 16) + (RUN|WAKE));
985 ++write_sq.active;
986 }
987 }
988
989 static void PMacPlay(void)
990 {
991 LOCK();
992 if (!awacs_sleeping) {
993 unsigned long flags;
994
995 spin_lock_irqsave(&dmasound.lock, flags);
996 __PMacPlay();
997 spin_unlock_irqrestore(&dmasound.lock, flags);
998 }
999 UNLOCK();
1000 }
1001
1002 static void PMacRecord(void)
1003 {
1004 unsigned long flags;
1005
1006 if (read_sq.active)
1007 return;
1008
1009 spin_lock_irqsave(&dmasound.lock, flags);
1010
1011 /* This is all we have to do......Just start it up.
1012 */
1013 out_le32(&awacs_rxdma->control, ((RUN|WAKE) << 16) + (RUN|WAKE));
1014 read_sq.active = 1;
1015
1016 spin_unlock_irqrestore(&dmasound.lock, flags);
1017 }
1018
1019 /* if the TX status comes up "DEAD" - reported on some Power Computing machines
1020 we need to re-start the dbdma - but from a different physical start address
1021 and with a different transfer length. It would get very messy to do this
1022 with the normal dbdma_cmd blocks - we would have to re-write the buffer start
1023 addresses each time. So, we will keep a single dbdma_cmd block which can be
1024 fiddled with.
1025 When DEAD status is first reported the content of the faulted dbdma block is
1026 copied into the emergency buffer and we note that the buffer is in use.
1027 we then bump the start physical address by the amount that was successfully
1028 output before it died.
1029 On any subsequent DEAD result we just do the bump-ups (we know that we are
1030 already using the emergency dbdma_cmd).
1031 CHECK: this just tries to "do it". It is possible that we should abandon
1032 xfers when the number of residual bytes gets below a certain value - I can
1033 see that this might cause a loop-forever if too small a transfer causes
1034 DEAD status. However this is a TODO for now - we'll see what gets reported.
1035 When we get a successful transfer result with the emergency buffer we just
1036 pretend that it completed using the original dmdma_cmd and carry on. The
1037 'next_cmd' field will already point back to the original loop of blocks.
1038 */
1039
1040 static irqreturn_t
1041 pmac_awacs_tx_intr(int irq, void *devid, struct pt_regs *regs)
1042 {
1043 int i = write_sq.front;
1044 int stat;
1045 int i_nowrap = write_sq.front;
1046 volatile struct dbdma_cmd *cp;
1047 /* != 0 when we are dealing with a DEAD xfer */
1048 static int emergency_in_use;
1049
1050 spin_lock(&dmasound.lock);
1051 while (write_sq.active > 0) { /* we expect to have done something*/
1052 if (emergency_in_use) /* we are dealing with DEAD xfer */
1053 cp = emergency_dbdma_cmd ;
1054 else
1055 cp = &awacs_tx_cmds[i];
1056 stat = ld_le16(&cp->xfer_status);
1057 if (stat & DEAD) {
1058 unsigned short req, res ;
1059 unsigned int phy ;
1060 #ifdef DEBUG_DMASOUND
1061 printk("dmasound_pmac: tx-irq: xfer died - patching it up...\n") ;
1062 #endif
1063 /* to clear DEAD status we must first clear RUN
1064 set it to quiescent to be on the safe side */
1065 (void)in_le32(&awacs_txdma->status);
1066 out_le32(&awacs_txdma->control,
1067 (RUN|PAUSE|FLUSH|WAKE) << 16);
1068 write_sq.died++ ;
1069 if (!emergency_in_use) { /* new problem */
1070 memcpy((void *)emergency_dbdma_cmd, (void *)cp,
1071 sizeof(struct dbdma_cmd));
1072 emergency_in_use = 1;
1073 cp = emergency_dbdma_cmd;
1074 }
1075 /* now bump the values to reflect the amount
1076 we haven't yet shifted */
1077 req = ld_le16(&cp->req_count);
1078 res = ld_le16(&cp->res_count);
1079 phy = ld_le32(&cp->phy_addr);
1080 phy += (req - res);
1081 st_le16(&cp->req_count, res);
1082 st_le16(&cp->res_count, 0);
1083 st_le16(&cp->xfer_status, 0);
1084 st_le32(&cp->phy_addr, phy);
1085 st_le32(&cp->cmd_dep, virt_to_bus(&awacs_tx_cmds[(i+1)%write_sq.max_count]));
1086 st_le16(&cp->command, OUTPUT_MORE | BR_ALWAYS | INTR_ALWAYS);
1087
1088 /* point at our patched up command block */
1089 out_le32(&awacs_txdma->cmdptr, virt_to_bus(cp));
1090 /* we must re-start the controller */
1091 (void)in_le32(&awacs_txdma->status);
1092 /* should complete clearing the DEAD status */
1093 out_le32(&awacs_txdma->control,
1094 ((RUN|WAKE) << 16) + (RUN|WAKE));
1095 break; /* this block is still going */
1096 }
1097 if ((stat & ACTIVE) == 0)
1098 break; /* this frame is still going */
1099 if (emergency_in_use)
1100 emergency_in_use = 0 ; /* done that */
1101 --write_sq.count;
1102 --write_sq.active;
1103 i_nowrap++;
1104 if (++i >= write_sq.max_count)
1105 i = 0;
1106 }
1107
1108 /* if we stopped and we were not sync-ing - then we under-ran */
1109 if( write_sq.syncing == 0 ){
1110 stat = in_le32(&awacs_txdma->status) ;
1111 /* we hit the dbdma_stop */
1112 if( (stat & ACTIVE) == 0 ) write_sq.xruns++ ;
1113 }
1114
1115 /* if we used some data up then wake the writer to supply some more*/
1116 if (i_nowrap != write_sq.front)
1117 WAKE_UP(write_sq.action_queue);
1118 write_sq.front = i;
1119
1120 /* but make sure we funnel what we've already got */\
1121 if (!awacs_sleeping)
1122 __PMacPlay();
1123
1124 /* make the wake-on-empty conditional on syncing */
1125 if (!write_sq.active && (write_sq.syncing & 1))
1126 WAKE_UP(write_sq.sync_queue); /* any time we're empty */
1127 spin_unlock(&dmasound.lock);
1128 return IRQ_HANDLED;
1129 }
1130
1131
1132 static irqreturn_t
1133 pmac_awacs_rx_intr(int irq, void *devid, struct pt_regs *regs)
1134 {
1135 int stat ;
1136 /* For some reason on my PowerBook G3, I get one interrupt
1137 * when the interrupt vector is installed (like something is
1138 * pending). This happens before the dbdma is initialized by
1139 * us, so I just check the command pointer and if it is zero,
1140 * just blow it off.
1141 */
1142 if (in_le32(&awacs_rxdma->cmdptr) == 0)
1143 return IRQ_HANDLED;
1144
1145 /* We also want to blow 'em off when shutting down.
1146 */
1147 if (read_sq.active == 0)
1148 return IRQ_HANDLED;
1149
1150 spin_lock(&dmasound.lock);
1151 /* Check multiple buffers in case we were held off from
1152 * interrupt processing for a long time. Geeze, I really hope
1153 * this doesn't happen.
1154 */
1155 while ((stat=awacs_rx_cmds[read_sq.rear].xfer_status)) {
1156
1157 /* if we got a "DEAD" status then just log it for now.
1158 and try to restart dma.
1159 TODO: figure out how best to fix it up
1160 */
1161 if (stat & DEAD){
1162 #ifdef DEBUG_DMASOUND
1163 printk("dmasound_pmac: rx-irq: DIED - attempting resurection\n");
1164 #endif
1165 /* to clear DEAD status we must first clear RUN
1166 set it to quiescent to be on the safe side */
1167 (void)in_le32(&awacs_txdma->status);
1168 out_le32(&awacs_txdma->control,
1169 (RUN|PAUSE|FLUSH|WAKE) << 16);
1170 awacs_rx_cmds[read_sq.rear].xfer_status = 0;
1171 awacs_rx_cmds[read_sq.rear].res_count = 0;
1172 read_sq.died++ ;
1173 (void)in_le32(&awacs_txdma->status);
1174 /* re-start the same block */
1175 out_le32(&awacs_rxdma->cmdptr,
1176 virt_to_bus(&awacs_rx_cmds[read_sq.rear]));
1177 /* we must re-start the controller */
1178 (void)in_le32(&awacs_rxdma->status);
1179 /* should complete clearing the DEAD status */
1180 out_le32(&awacs_rxdma->control,
1181 ((RUN|WAKE) << 16) + (RUN|WAKE));
1182 spin_unlock(&dmasound.lock);
1183 return IRQ_HANDLED; /* try this block again */
1184 }
1185 /* Clear status and move on to next buffer.
1186 */
1187 awacs_rx_cmds[read_sq.rear].xfer_status = 0;
1188 read_sq.rear++;
1189
1190 /* Wrap the buffer ring.
1191 */
1192 if (read_sq.rear >= read_sq.max_active)
1193 read_sq.rear = 0;
1194
1195 /* If we have caught up to the front buffer, bump it.
1196 * This will cause weird (but not fatal) results if the
1197 * read loop is currently using this buffer. The user is
1198 * behind in this case anyway, so weird things are going
1199 * to happen.
1200 */
1201 if (read_sq.rear == read_sq.front) {
1202 read_sq.front++;
1203 read_sq.xruns++ ; /* we overan */
1204 if (read_sq.front >= read_sq.max_active)
1205 read_sq.front = 0;
1206 }
1207 }
1208
1209 WAKE_UP(read_sq.action_queue);
1210 spin_unlock(&dmasound.lock);
1211 return IRQ_HANDLED;
1212 }
1213
1214
1215 static irqreturn_t
1216 pmac_awacs_intr(int irq, void *devid, struct pt_regs *regs)
1217 {
1218 int ctrl;
1219 int status;
1220 int r1;
1221
1222 spin_lock(&dmasound.lock);
1223 ctrl = in_le32(&awacs->control);
1224 status = in_le32(&awacs->codec_stat);
1225
1226 if (ctrl & MASK_PORTCHG) {
1227 /* tested on Screamer, should work on others too */
1228 if (awacs_revision == AWACS_SCREAMER) {
1229 if (((status & MASK_HDPCONN) >> 3) && (hdp_connected == 0)) {
1230 hdp_connected = 1;
1231
1232 r1 = awacs_reg[1] | MASK_SPKMUTE;
1233 awacs_reg[1] = r1;
1234 awacs_write(r1 | MASK_ADDR_MUTE);
1235 } else if (((status & MASK_HDPCONN) >> 3 == 0) && (hdp_connected == 1)) {
1236 hdp_connected = 0;
1237
1238 r1 = awacs_reg[1] & ~MASK_SPKMUTE;
1239 awacs_reg[1] = r1;
1240 awacs_write(r1 | MASK_ADDR_MUTE);
1241 }
1242 }
1243 }
1244 if (ctrl & MASK_CNTLERR) {
1245 int err = (in_le32(&awacs->codec_stat) & MASK_ERRCODE) >> 16;
1246 /* CHECK: we just swallow burgundy errors at the moment..*/
1247 if (err != 0 && awacs_revision != AWACS_BURGUNDY)
1248 printk(KERN_ERR "dmasound_pmac: error %x\n", err);
1249 }
1250 /* Writing 1s to the CNTLERR and PORTCHG bits clears them... */
1251 out_le32(&awacs->control, ctrl);
1252 spin_unlock(&dmasound.lock);
1253 return IRQ_HANDLED;
1254 }
1255
1256 static void
1257 awacs_write(int val)
1258 {
1259 int count = 300 ;
1260 if (awacs_revision >= AWACS_DACA || !awacs)
1261 return ;
1262
1263 while ((in_le32(&awacs->codec_ctrl) & MASK_NEWECMD) && count--)
1264 udelay(1) ; /* timeout is > 2 samples at lowest rate */
1265 out_le32(&awacs->codec_ctrl, val | (awacs_subframe << 22));
1266 (void)in_le32(&awacs->byteswap);
1267 }
1268
1269 /* this is called when the beep timer expires... it will be called even
1270 if the beep has been overidden by other sound output.
1271 */
1272 static void awacs_nosound(unsigned long xx)
1273 {
1274 unsigned long flags;
1275 int count = 600 ; /* > four samples at lowest rate */
1276
1277 spin_lock_irqsave(&dmasound.lock, flags);
1278 if (beep_playing) {
1279 st_le16(&beep_dbdma_cmd->command, DBDMA_STOP);
1280 out_le32(&awacs_txdma->control, (RUN|PAUSE|FLUSH|WAKE) << 16);
1281 while ((in_le32(&awacs_txdma->status) & RUN) && count--)
1282 udelay(1);
1283 if (awacs)
1284 awacs_setup_for_beep(-1);
1285 beep_playing = 0;
1286 }
1287 spin_unlock_irqrestore(&dmasound.lock, flags);
1288 }
1289
1290 /*
1291 * We generate the beep with a single dbdma command that loops a buffer
1292 * forever - without generating interrupts.
1293 *
1294 * So, to stop it you have to stop dma output as per awacs_nosound.
1295 */
1296 static int awacs_beep_event(struct input_dev *dev, unsigned int type,
1297 unsigned int code, int hz)
1298 {
1299 unsigned long flags;
1300 int beep_speed = 0;
1301 int srate;
1302 int period, ncycles, nsamples;
1303 int i, j, f;
1304 short *p;
1305 static int beep_hz_cache;
1306 static int beep_nsamples_cache;
1307 static int beep_volume_cache;
1308
1309 if (type != EV_SND)
1310 return -1;
1311 switch (code) {
1312 case SND_BELL:
1313 if (hz)
1314 hz = 1000;
1315 break;
1316 case SND_TONE:
1317 break;
1318 default:
1319 return -1;
1320 }
1321
1322 if (beep_buf == NULL)
1323 return -1;
1324
1325 /* quick-hack fix for DACA, Burgundy & Tumbler */
1326
1327 if (awacs_revision >= AWACS_DACA){
1328 srate = 44100 ;
1329 } else {
1330 for (i = 0; i < 8 && awacs_freqs[i] >= BEEP_SRATE; ++i)
1331 if (awacs_freqs_ok[i])
1332 beep_speed = i;
1333 srate = awacs_freqs[beep_speed];
1334 }
1335
1336 if (hz <= srate / BEEP_BUFLEN || hz > srate / 2) {
1337 /* cancel beep currently playing */
1338 awacs_nosound(0);
1339 return 0;
1340 }
1341
1342 spin_lock_irqsave(&dmasound.lock, flags);
1343 if (beep_playing || write_sq.active || beep_buf == NULL) {
1344 spin_unlock_irqrestore(&dmasound.lock, flags);
1345 return -1; /* too hard, sorry :-( */
1346 }
1347 beep_playing = 1;
1348 st_le16(&beep_dbdma_cmd->command, OUTPUT_MORE + BR_ALWAYS);
1349 spin_unlock_irqrestore(&dmasound.lock, flags);
1350
1351 if (hz == beep_hz_cache && beep_vol == beep_volume_cache) {
1352 nsamples = beep_nsamples_cache;
1353 } else {
1354 period = srate * 256 / hz; /* fixed point */
1355 ncycles = BEEP_BUFLEN * 256 / period;
1356 nsamples = (period * ncycles) >> 8;
1357 f = ncycles * 65536 / nsamples;
1358 j = 0;
1359 p = beep_buf;
1360 for (i = 0; i < nsamples; ++i, p += 2) {
1361 p[0] = p[1] = beep_wform[j >> 8] * beep_vol;
1362 j = (j + f) & 0xffff;
1363 }
1364 beep_hz_cache = hz;
1365 beep_volume_cache = beep_vol;
1366 beep_nsamples_cache = nsamples;
1367 }
1368
1369 st_le16(&beep_dbdma_cmd->req_count, nsamples*4);
1370 st_le16(&beep_dbdma_cmd->xfer_status, 0);
1371 st_le32(&beep_dbdma_cmd->cmd_dep, virt_to_bus(beep_dbdma_cmd));
1372 st_le32(&beep_dbdma_cmd->phy_addr, virt_to_bus(beep_buf));
1373 awacs_beep_state = 1;
1374
1375 spin_lock_irqsave(&dmasound.lock, flags);
1376 if (beep_playing) { /* i.e. haven't been terminated already */
1377 int count = 300 ;
1378 out_le32(&awacs_txdma->control, (RUN|WAKE|FLUSH|PAUSE) << 16);
1379 while ((in_le32(&awacs_txdma->status) & RUN) && count--)
1380 udelay(1); /* timeout > 2 samples at lowest rate*/
1381 if (awacs)
1382 awacs_setup_for_beep(beep_speed);
1383 out_le32(&awacs_txdma->cmdptr, virt_to_bus(beep_dbdma_cmd));
1384 (void)in_le32(&awacs_txdma->status);
1385 out_le32(&awacs_txdma->control, RUN | (RUN << 16));
1386 }
1387 spin_unlock_irqrestore(&dmasound.lock, flags);
1388
1389 return 0;
1390 }
1391
1392 /* used in init and for wake-up */
1393
1394 static void
1395 load_awacs(void)
1396 {
1397 awacs_write(awacs_reg[0] + MASK_ADDR0);
1398 awacs_write(awacs_reg[1] + MASK_ADDR1);
1399 awacs_write(awacs_reg[2] + MASK_ADDR2);
1400 awacs_write(awacs_reg[4] + MASK_ADDR4);
1401
1402 if (awacs_revision == AWACS_SCREAMER) {
1403 awacs_write(awacs_reg[5] + MASK_ADDR5);
1404 msleep(100);
1405 awacs_write(awacs_reg[6] + MASK_ADDR6);
1406 msleep(2);
1407 awacs_write(awacs_reg[1] + MASK_ADDR1);
1408 awacs_write(awacs_reg[7] + MASK_ADDR7);
1409 }
1410 if (awacs) {
1411 if (hw_can_byteswap && (dmasound.hard.format == AFMT_S16_LE))
1412 out_le32(&awacs->byteswap, BS_VAL);
1413 else
1414 out_le32(&awacs->byteswap, 0);
1415 }
1416 }
1417
1418 #ifdef CONFIG_PM
1419 /*
1420 * Save state when going to sleep, restore it afterwards.
1421 */
1422 /* FIXME: sort out disabling/re-enabling of read stuff as well */
1423 static int awacs_sleep_notify(struct pmu_sleep_notifier *self, int when)
1424 {
1425 unsigned long flags;
1426
1427 switch (when) {
1428 case PBOOK_SLEEP_NOW:
1429 LOCK();
1430 awacs_sleeping = 1;
1431 /* Tell the rest of the driver we are now going to sleep */
1432 mb();
1433 if (awacs_revision == AWACS_SCREAMER ||
1434 awacs_revision == AWACS_AWACS) {
1435 awacs_reg1_save = awacs_reg[1];
1436 awacs_reg[1] |= MASK_AMUTE | MASK_CMUTE;
1437 awacs_write(MASK_ADDR1 | awacs_reg[1]);
1438 }
1439
1440 PMacSilence();
1441 /* stop rx - if going - a bit of a daft user... but */
1442 out_le32(&awacs_rxdma->control, (RUN|WAKE|FLUSH << 16));
1443 /* deny interrupts */
1444 if (awacs)
1445 disable_irq(awacs_irq);
1446 disable_irq(awacs_tx_irq);
1447 disable_irq(awacs_rx_irq);
1448 /* Chip specific sleep code */
1449 switch (awacs_revision) {
1450 case AWACS_TUMBLER:
1451 case AWACS_SNAPPER:
1452 write_audio_gpio(gpio_headphone_mute, gpio_headphone_mute_pol);
1453 write_audio_gpio(gpio_amp_mute, gpio_amp_mute_pol);
1454 tas_enter_sleep();
1455 write_audio_gpio(gpio_audio_reset, gpio_audio_reset_pol);
1456 break ;
1457 case AWACS_DACA:
1458 daca_enter_sleep();
1459 break ;
1460 case AWACS_BURGUNDY:
1461 break ;
1462 case AWACS_SCREAMER:
1463 case AWACS_AWACS:
1464 default:
1465 out_le32(&awacs->control, 0x11) ;
1466 break ;
1467 }
1468 /* Disable sound clock */
1469 pmac_call_feature(PMAC_FTR_SOUND_CHIP_ENABLE, awacs_node, 0, 0);
1470 /* According to Darwin, we do that after turning off the sound
1471 * chip clock. All this will have to be cleaned up once we properly
1472 * parse the OF sound-objects
1473 */
1474 if ((machine_is_compatible("PowerBook3,1") ||
1475 machine_is_compatible("PowerBook3,2")) && awacs) {
1476 awacs_reg[1] |= MASK_PAROUT0 | MASK_PAROUT1;
1477 awacs_write(MASK_ADDR1 | awacs_reg[1]);
1478 msleep(200);
1479 }
1480 break;
1481 case PBOOK_WAKE:
1482 /* Enable sound clock */
1483 pmac_call_feature(PMAC_FTR_SOUND_CHIP_ENABLE, awacs_node, 0, 1);
1484 if ((machine_is_compatible("PowerBook3,1") ||
1485 machine_is_compatible("PowerBook3,2")) && awacs) {
1486 msleep(100);
1487 awacs_reg[1] &= ~(MASK_PAROUT0 | MASK_PAROUT1);
1488 awacs_write(MASK_ADDR1 | awacs_reg[1]);
1489 msleep(300);
1490 } else
1491 msleep(1000);
1492 /* restore settings */
1493 switch (awacs_revision) {
1494 case AWACS_TUMBLER:
1495 case AWACS_SNAPPER:
1496 write_audio_gpio(gpio_headphone_mute, gpio_headphone_mute_pol);
1497 write_audio_gpio(gpio_amp_mute, gpio_amp_mute_pol);
1498 write_audio_gpio(gpio_audio_reset, gpio_audio_reset_pol);
1499 msleep(100);
1500 write_audio_gpio(gpio_audio_reset, !gpio_audio_reset_pol);
1501 msleep(150);
1502 tas_leave_sleep(); /* Stub for now */
1503 headphone_intr(0,NULL,NULL);
1504 break;
1505 case AWACS_DACA:
1506 msleep(10); /* Check this !!! */
1507 daca_leave_sleep();
1508 break ; /* dont know how yet */
1509 case AWACS_BURGUNDY:
1510 break ;
1511 case AWACS_SCREAMER:
1512 case AWACS_AWACS:
1513 default:
1514 load_awacs() ;
1515 break ;
1516 }
1517 /* Recalibrate chip */
1518 if (awacs_revision == AWACS_SCREAMER && awacs)
1519 awacs_recalibrate();
1520 /* Make sure dma is stopped */
1521 PMacSilence();
1522 if (awacs)
1523 enable_irq(awacs_irq);
1524 enable_irq(awacs_tx_irq);
1525 enable_irq(awacs_rx_irq);
1526 if (awacs) {
1527 /* OK, allow ints back again */
1528 out_le32(&awacs->control, MASK_IEPC
1529 | (awacs_rate_index << 8) | 0x11
1530 | (awacs_revision < AWACS_DACA ? MASK_IEE: 0));
1531 }
1532 if (macio_base && is_pbook_g3) {
1533 /* FIXME: should restore the setup we had...*/
1534 out_8(macio_base + 0x37, 3);
1535 } else if (is_pbook_3X00) {
1536 in_8(latch_base + 0x190);
1537 }
1538 /* Remove mute */
1539 if (awacs_revision == AWACS_SCREAMER ||
1540 awacs_revision == AWACS_AWACS) {
1541 awacs_reg[1] = awacs_reg1_save;
1542 awacs_write(MASK_ADDR1 | awacs_reg[1]);
1543 }
1544 awacs_sleeping = 0;
1545 /* Resume pending sounds. */
1546 /* we don't try to restart input... */
1547 spin_lock_irqsave(&dmasound.lock, flags);
1548 __PMacPlay();
1549 spin_unlock_irqrestore(&dmasound.lock, flags);
1550 UNLOCK();
1551 }
1552 return PBOOK_SLEEP_OK;
1553 }
1554 #endif /* CONFIG_PM */
1555
1556
1557 /* All the burgundy functions: */
1558
1559 /* Waits for busy flag to clear */
1560 inline static void
1561 awacs_burgundy_busy_wait(void)
1562 {
1563 int count = 50; /* > 2 samples at 44k1 */
1564 while ((in_le32(&awacs->codec_ctrl) & MASK_NEWECMD) && count--)
1565 udelay(1) ;
1566 }
1567
1568 inline static void
1569 awacs_burgundy_extend_wait(void)
1570 {
1571 int count = 50 ; /* > 2 samples at 44k1 */
1572 while ((!(in_le32(&awacs->codec_stat) & MASK_EXTEND)) && count--)
1573 udelay(1) ;
1574 count = 50;
1575 while ((in_le32(&awacs->codec_stat) & MASK_EXTEND) && count--)
1576 udelay(1);
1577 }
1578
1579 static void
1580 awacs_burgundy_wcw(unsigned addr, unsigned val)
1581 {
1582 out_le32(&awacs->codec_ctrl, addr + 0x200c00 + (val & 0xff));
1583 awacs_burgundy_busy_wait();
1584 out_le32(&awacs->codec_ctrl, addr + 0x200d00 +((val>>8) & 0xff));
1585 awacs_burgundy_busy_wait();
1586 out_le32(&awacs->codec_ctrl, addr + 0x200e00 +((val>>16) & 0xff));
1587 awacs_burgundy_busy_wait();
1588 out_le32(&awacs->codec_ctrl, addr + 0x200f00 +((val>>24) & 0xff));
1589 awacs_burgundy_busy_wait();
1590 }
1591
1592 static unsigned
1593 awacs_burgundy_rcw(unsigned addr)
1594 {
1595 unsigned val = 0;
1596 unsigned long flags;
1597
1598 /* should have timeouts here */
1599 spin_lock_irqsave(&dmasound.lock, flags);
1600
1601 out_le32(&awacs->codec_ctrl, addr + 0x100000);
1602 awacs_burgundy_busy_wait();
1603 awacs_burgundy_extend_wait();
1604 val += (in_le32(&awacs->codec_stat) >> 4) & 0xff;
1605
1606 out_le32(&awacs->codec_ctrl, addr + 0x100100);
1607 awacs_burgundy_busy_wait();
1608 awacs_burgundy_extend_wait();
1609 val += ((in_le32(&awacs->codec_stat)>>4) & 0xff) <<8;
1610
1611 out_le32(&awacs->codec_ctrl, addr + 0x100200);
1612 awacs_burgundy_busy_wait();
1613 awacs_burgundy_extend_wait();
1614 val += ((in_le32(&awacs->codec_stat)>>4) & 0xff) <<16;
1615
1616 out_le32(&awacs->codec_ctrl, addr + 0x100300);
1617 awacs_burgundy_busy_wait();
1618 awacs_burgundy_extend_wait();
1619 val += ((in_le32(&awacs->codec_stat)>>4) & 0xff) <<24;
1620
1621 spin_unlock_irqrestore(&dmasound.lock, flags);
1622
1623 return val;
1624 }
1625
1626
1627 static void
1628 awacs_burgundy_wcb(unsigned addr, unsigned val)
1629 {
1630 out_le32(&awacs->codec_ctrl, addr + 0x300000 + (val & 0xff));
1631 awacs_burgundy_busy_wait();
1632 }
1633
1634 static unsigned
1635 awacs_burgundy_rcb(unsigned addr)
1636 {
1637 unsigned val = 0;
1638 unsigned long flags;
1639
1640 /* should have timeouts here */
1641 spin_lock_irqsave(&dmasound.lock, flags);
1642
1643 out_le32(&awacs->codec_ctrl, addr + 0x100000);
1644 awacs_burgundy_busy_wait();
1645 awacs_burgundy_extend_wait();
1646 val += (in_le32(&awacs->codec_stat) >> 4) & 0xff;
1647
1648 spin_unlock_irqrestore(&dmasound.lock, flags);
1649
1650 return val;
1651 }
1652
1653 static int
1654 awacs_burgundy_check(void)
1655 {
1656 /* Checks to see the chip is alive and kicking */
1657 int error = in_le32(&awacs->codec_ctrl) & MASK_ERRCODE;
1658
1659 return error == 0xf0000;
1660 }
1661
1662 static int
1663 awacs_burgundy_init(void)
1664 {
1665 if (awacs_burgundy_check()) {
1666 printk(KERN_WARNING "dmasound_pmac: burgundy not working :-(\n");
1667 return 1;
1668 }
1669
1670 awacs_burgundy_wcb(MASK_ADDR_BURGUNDY_OUTPUTENABLES,
1671 DEF_BURGUNDY_OUTPUTENABLES);
1672 awacs_burgundy_wcb(MASK_ADDR_BURGUNDY_MORE_OUTPUTENABLES,
1673 DEF_BURGUNDY_MORE_OUTPUTENABLES);
1674 awacs_burgundy_wcw(MASK_ADDR_BURGUNDY_OUTPUTSELECTS,
1675 DEF_BURGUNDY_OUTPUTSELECTS);
1676
1677 awacs_burgundy_wcb(MASK_ADDR_BURGUNDY_INPSEL21,
1678 DEF_BURGUNDY_INPSEL21);
1679 awacs_burgundy_wcb(MASK_ADDR_BURGUNDY_INPSEL3,
1680 DEF_BURGUNDY_INPSEL3);
1681 awacs_burgundy_wcb(MASK_ADDR_BURGUNDY_GAINCD,
1682 DEF_BURGUNDY_GAINCD);
1683 awacs_burgundy_wcb(MASK_ADDR_BURGUNDY_GAINLINE,
1684 DEF_BURGUNDY_GAINLINE);
1685 awacs_burgundy_wcb(MASK_ADDR_BURGUNDY_GAINMIC,
1686 DEF_BURGUNDY_GAINMIC);
1687 awacs_burgundy_wcb(MASK_ADDR_BURGUNDY_GAINMODEM,
1688 DEF_BURGUNDY_GAINMODEM);
1689
1690 awacs_burgundy_wcb(MASK_ADDR_BURGUNDY_ATTENSPEAKER,
1691 DEF_BURGUNDY_ATTENSPEAKER);
1692 awacs_burgundy_wcb(MASK_ADDR_BURGUNDY_ATTENLINEOUT,
1693 DEF_BURGUNDY_ATTENLINEOUT);
1694 awacs_burgundy_wcb(MASK_ADDR_BURGUNDY_ATTENHP,
1695 DEF_BURGUNDY_ATTENHP);
1696
1697 awacs_burgundy_wcw(MASK_ADDR_BURGUNDY_MASTER_VOLUME,
1698 DEF_BURGUNDY_MASTER_VOLUME);
1699 awacs_burgundy_wcw(MASK_ADDR_BURGUNDY_VOLCD,
1700 DEF_BURGUNDY_VOLCD);
1701 awacs_burgundy_wcw(MASK_ADDR_BURGUNDY_VOLLINE,
1702 DEF_BURGUNDY_VOLLINE);
1703 awacs_burgundy_wcw(MASK_ADDR_BURGUNDY_VOLMIC,
1704 DEF_BURGUNDY_VOLMIC);
1705 return 0;
1706 }
1707
1708 static void
1709 awacs_burgundy_write_volume(unsigned address, int volume)
1710 {
1711 int hardvolume,lvolume,rvolume;
1712
1713 lvolume = (volume & 0xff) ? (volume & 0xff) + 155 : 0;
1714 rvolume = ((volume >>8)&0xff) ? ((volume >> 8)&0xff ) + 155 : 0;
1715
1716 hardvolume = lvolume + (rvolume << 16);
1717
1718 awacs_burgundy_wcw(address, hardvolume);
1719 }
1720
1721 static int
1722 awacs_burgundy_read_volume(unsigned address)
1723 {
1724 int softvolume,wvolume;
1725
1726 wvolume = awacs_burgundy_rcw(address);
1727
1728 softvolume = (wvolume & 0xff) - 155;
1729 softvolume += (((wvolume >> 16) & 0xff) - 155)<<8;
1730
1731 return softvolume > 0 ? softvolume : 0;
1732 }
1733
1734 static int
1735 awacs_burgundy_read_mvolume(unsigned address)
1736 {
1737 int lvolume,rvolume,wvolume;
1738
1739 wvolume = awacs_burgundy_rcw(address);
1740
1741 wvolume &= 0xffff;
1742
1743 rvolume = (wvolume & 0xff) - 155;
1744 lvolume = ((wvolume & 0xff00)>>8) - 155;
1745
1746 return lvolume + (rvolume << 8);
1747 }
1748
1749 static void
1750 awacs_burgundy_write_mvolume(unsigned address, int volume)
1751 {
1752 int lvolume,rvolume,hardvolume;
1753
1754 lvolume = (volume &0xff) ? (volume & 0xff) + 155 :0;
1755 rvolume = ((volume >>8) & 0xff) ? (volume >> 8) + 155 :0;
1756
1757 hardvolume = lvolume + (rvolume << 8);
1758 hardvolume += (hardvolume << 16);
1759
1760 awacs_burgundy_wcw(address, hardvolume);
1761 }
1762
1763 /* End burgundy functions */
1764
1765 /* Set up output volumes on machines with the 'perch/whisper' extension card.
1766 * this has an SGS i2c chip (7433) which is accessed using the cuda.
1767 *
1768 * TODO: split this out and make use of the other parts of the SGS chip to
1769 * do Bass, Treble etc.
1770 */
1771
1772 static void
1773 awacs_enable_amp(int spkr_vol)
1774 {
1775 #ifdef CONFIG_ADB_CUDA
1776 struct adb_request req;
1777
1778 if (sys_ctrler != SYS_CTRLER_CUDA)
1779 return;
1780
1781 /* turn on headphones */
1782 cuda_request(&req, NULL, 5, CUDA_PACKET, CUDA_GET_SET_IIC,
1783 0x8a, 4, 0);
1784 while (!req.complete) cuda_poll();
1785 cuda_request(&req, NULL, 5, CUDA_PACKET, CUDA_GET_SET_IIC,
1786 0x8a, 6, 0);
1787 while (!req.complete) cuda_poll();
1788
1789 /* turn on speaker */
1790 cuda_request(&req, NULL, 5, CUDA_PACKET, CUDA_GET_SET_IIC,
1791 0x8a, 3, (100 - (spkr_vol & 0xff)) * 32 / 100);
1792 while (!req.complete) cuda_poll();
1793 cuda_request(&req, NULL, 5, CUDA_PACKET, CUDA_GET_SET_IIC,
1794 0x8a, 5, (100 - ((spkr_vol >> 8) & 0xff)) * 32 / 100);
1795 while (!req.complete) cuda_poll();
1796
1797 cuda_request(&req, NULL, 5, CUDA_PACKET,
1798 CUDA_GET_SET_IIC, 0x8a, 1, 0x29);
1799 while (!req.complete) cuda_poll();
1800 #endif /* CONFIG_ADB_CUDA */
1801 }
1802
1803
1804 /*** Mid level stuff *********************************************************/
1805
1806
1807 /*
1808 * /dev/mixer abstraction
1809 */
1810
1811 static void do_line_lev(int data)
1812 {
1813 line_lev = data ;
1814 awacs_reg[0] &= ~MASK_MUX_AUDIN;
1815 if ((data & 0xff) >= 50)
1816 awacs_reg[0] |= MASK_MUX_AUDIN;
1817 awacs_write(MASK_ADDR0 | awacs_reg[0]);
1818 }
1819
1820 static void do_ip_gain(int data)
1821 {
1822 ip_gain = data ;
1823 data &= 0xff;
1824 awacs_reg[0] &= ~MASK_GAINLINE;
1825 if (awacs_revision == AWACS_SCREAMER) {
1826 awacs_reg[6] &= ~MASK_MIC_BOOST ;
1827 if (data >= 33) {
1828 awacs_reg[0] |= MASK_GAINLINE;
1829 if( data >= 66)
1830 awacs_reg[6] |= MASK_MIC_BOOST ;
1831 }
1832 awacs_write(MASK_ADDR6 | awacs_reg[6]) ;
1833 } else {
1834 if (data >= 50)
1835 awacs_reg[0] |= MASK_GAINLINE;
1836 }
1837 awacs_write(MASK_ADDR0 | awacs_reg[0]);
1838 }
1839
1840 static void do_mic_lev(int data)
1841 {
1842 mic_lev = data ;
1843 data &= 0xff;
1844 awacs_reg[0] &= ~MASK_MUX_MIC;
1845 if (data >= 50)
1846 awacs_reg[0] |= MASK_MUX_MIC;
1847 awacs_write(MASK_ADDR0 | awacs_reg[0]);
1848 }
1849
1850 static void do_cd_lev(int data)
1851 {
1852 cd_lev = data ;
1853 awacs_reg[0] &= ~MASK_MUX_CD;
1854 if ((data & 0xff) >= 50)
1855 awacs_reg[0] |= MASK_MUX_CD;
1856 awacs_write(MASK_ADDR0 | awacs_reg[0]);
1857 }
1858
1859 static void do_rec_lev(int data)
1860 {
1861 int left, right ;
1862 rec_lev = data ;
1863 /* need to fudge this to use the volume setter routine */
1864 left = 100 - (data & 0xff) ; if( left < 0 ) left = 0 ;
1865 right = 100 - ((data >> 8) & 0xff) ; if( right < 0 ) right = 0 ;
1866 left |= (right << 8 );
1867 left = awacs_volume_setter(left, 0, 0, 4);
1868 }
1869
1870 static void do_passthru_vol(int data)
1871 {
1872 passthru_vol = data ;
1873 awacs_reg[1] &= ~MASK_LOOPTHRU;
1874 if (awacs_revision == AWACS_SCREAMER) {
1875 if( data ) { /* switch it on for non-zero */
1876 awacs_reg[1] |= MASK_LOOPTHRU;
1877 awacs_write(MASK_ADDR1 | awacs_reg[1]);
1878 }
1879 data = awacs_volume_setter(data, 5, 0, 6) ;
1880 } else {
1881 if ((data & 0xff) >= 50)
1882 awacs_reg[1] |= MASK_LOOPTHRU;
1883 awacs_write(MASK_ADDR1 | awacs_reg[1]);
1884 data = (awacs_reg[1] & MASK_LOOPTHRU)? 100: 0;
1885 }
1886 }
1887
1888 static int awacs_mixer_ioctl(u_int cmd, u_long arg)
1889 {
1890 int data;
1891 int rc;
1892
1893 switch (cmd) {
1894 case SOUND_MIXER_READ_CAPS:
1895 /* say we will allow multiple inputs? prob. wrong
1896 so I'm switching it to single */
1897 return IOCTL_OUT(arg, 1);
1898 case SOUND_MIXER_READ_DEVMASK:
1899 data = SOUND_MASK_VOLUME | SOUND_MASK_SPEAKER
1900 | SOUND_MASK_LINE | SOUND_MASK_MIC | SOUND_MASK_CD
1901 | SOUND_MASK_IGAIN | SOUND_MASK_RECLEV
1902 | SOUND_MASK_ALTPCM
1903 | SOUND_MASK_MONITOR;
1904 rc = IOCTL_OUT(arg, data);
1905 break;
1906 case SOUND_MIXER_READ_RECMASK:
1907 data = SOUND_MASK_LINE | SOUND_MASK_MIC | SOUND_MASK_CD;
1908 rc = IOCTL_OUT(arg, data);
1909 break;
1910 case SOUND_MIXER_READ_RECSRC:
1911 data = 0;
1912 if (awacs_reg[0] & MASK_MUX_AUDIN)
1913 data |= SOUND_MASK_LINE;
1914 if (awacs_reg[0] & MASK_MUX_MIC)
1915 data |= SOUND_MASK_MIC;
1916 if (awacs_reg[0] & MASK_MUX_CD)
1917 data |= SOUND_MASK_CD;
1918 rc = IOCTL_OUT(arg, data);
1919 break;
1920 case SOUND_MIXER_WRITE_RECSRC:
1921 IOCTL_IN(arg, data);
1922 data &= (SOUND_MASK_LINE | SOUND_MASK_MIC | SOUND_MASK_CD);
1923 awacs_reg[0] &= ~(MASK_MUX_CD | MASK_MUX_MIC
1924 | MASK_MUX_AUDIN);
1925 if (data & SOUND_MASK_LINE)
1926 awacs_reg[0] |= MASK_MUX_AUDIN;
1927 if (data & SOUND_MASK_MIC)
1928 awacs_reg[0] |= MASK_MUX_MIC;
1929 if (data & SOUND_MASK_CD)
1930 awacs_reg[0] |= MASK_MUX_CD;
1931 awacs_write(awacs_reg[0] | MASK_ADDR0);
1932 rc = IOCTL_OUT(arg, data);
1933 break;
1934 case SOUND_MIXER_READ_STEREODEVS:
1935 data = SOUND_MASK_VOLUME | SOUND_MASK_SPEAKER| SOUND_MASK_RECLEV ;
1936 if (awacs_revision == AWACS_SCREAMER)
1937 data |= SOUND_MASK_MONITOR ;
1938 rc = IOCTL_OUT(arg, data);
1939 break;
1940 case SOUND_MIXER_WRITE_VOLUME:
1941 IOCTL_IN(arg, data);
1942 line_vol = data ;
1943 awacs_volume_setter(data, 2, 0, 6);
1944 /* fall through */
1945 case SOUND_MIXER_READ_VOLUME:
1946 rc = IOCTL_OUT(arg, line_vol);
1947 break;
1948 case SOUND_MIXER_WRITE_SPEAKER:
1949 IOCTL_IN(arg, data);
1950 spk_vol = data ;
1951 if (has_perch)
1952 awacs_enable_amp(data);
1953 else
1954 (void)awacs_volume_setter(data, 4, MASK_CMUTE, 6);
1955 /* fall though */
1956 case SOUND_MIXER_READ_SPEAKER:
1957 rc = IOCTL_OUT(arg, spk_vol);
1958 break;
1959 case SOUND_MIXER_WRITE_ALTPCM: /* really bell volume */
1960 IOCTL_IN(arg, data);
1961 beep_vol = data & 0xff;
1962 /* fall through */
1963 case SOUND_MIXER_READ_ALTPCM:
1964 rc = IOCTL_OUT(arg, beep_vol);
1965 break;
1966 case SOUND_MIXER_WRITE_LINE:
1967 IOCTL_IN(arg, data);
1968 do_line_lev(data) ;
1969 /* fall through */
1970 case SOUND_MIXER_READ_LINE:
1971 rc = IOCTL_OUT(arg, line_lev);
1972 break;
1973 case SOUND_MIXER_WRITE_IGAIN:
1974 IOCTL_IN(arg, data);
1975 do_ip_gain(data) ;
1976 /* fall through */
1977 case SOUND_MIXER_READ_IGAIN:
1978 rc = IOCTL_OUT(arg, ip_gain);
1979 break;
1980 case SOUND_MIXER_WRITE_MIC:
1981 IOCTL_IN(arg, data);
1982 do_mic_lev(data);
1983 /* fall through */
1984 case SOUND_MIXER_READ_MIC:
1985 rc = IOCTL_OUT(arg, mic_lev);
1986 break;
1987 case SOUND_MIXER_WRITE_CD:
1988 IOCTL_IN(arg, data);
1989 do_cd_lev(data);
1990 /* fall through */
1991 case SOUND_MIXER_READ_CD:
1992 rc = IOCTL_OUT(arg, cd_lev);
1993 break;
1994 case SOUND_MIXER_WRITE_RECLEV:
1995 IOCTL_IN(arg, data);
1996 do_rec_lev(data) ;
1997 /* fall through */
1998 case SOUND_MIXER_READ_RECLEV:
1999 rc = IOCTL_OUT(arg, rec_lev);
2000 break;
2001 case MIXER_WRITE(SOUND_MIXER_MONITOR):
2002 IOCTL_IN(arg, data);
2003 do_passthru_vol(data) ;
2004 /* fall through */
2005 case MIXER_READ(SOUND_MIXER_MONITOR):
2006 rc = IOCTL_OUT(arg, passthru_vol);
2007 break;
2008 default:
2009 rc = -EINVAL;
2010 }
2011
2012 return rc;
2013 }
2014
2015 static void awacs_mixer_init(void)
2016 {
2017 awacs_volume_setter(line_vol, 2, 0, 6);
2018 if (has_perch)
2019 awacs_enable_amp(spk_vol);
2020 else
2021 (void)awacs_volume_setter(spk_vol, 4, MASK_CMUTE, 6);
2022 do_line_lev(line_lev) ;
2023 do_ip_gain(ip_gain) ;
2024 do_mic_lev(mic_lev) ;
2025 do_cd_lev(cd_lev) ;
2026 do_rec_lev(rec_lev) ;
2027 do_passthru_vol(passthru_vol) ;
2028 }
2029
2030 static int burgundy_mixer_ioctl(u_int cmd, u_long arg)
2031 {
2032 int data;
2033 int rc;
2034
2035 /* We are, we are, we are... Burgundy or better */
2036 switch(cmd) {
2037 case SOUND_MIXER_READ_DEVMASK:
2038 data = SOUND_MASK_VOLUME | SOUND_MASK_CD |
2039 SOUND_MASK_LINE | SOUND_MASK_MIC |
2040 SOUND_MASK_SPEAKER | SOUND_MASK_ALTPCM;
2041 rc = IOCTL_OUT(arg, data);
2042 break;
2043 case SOUND_MIXER_READ_RECMASK:
2044 data = SOUND_MASK_LINE | SOUND_MASK_MIC
2045 | SOUND_MASK_CD;
2046 rc = IOCTL_OUT(arg, data);
2047 break;
2048 case SOUND_MIXER_READ_RECSRC:
2049 data = 0;
2050 if (awacs_reg[0] & MASK_MUX_AUDIN)
2051 data |= SOUND_MASK_LINE;
2052 if (awacs_reg[0] & MASK_MUX_MIC)
2053 data |= SOUND_MASK_MIC;
2054 if (awacs_reg[0] & MASK_MUX_CD)
2055 data |= SOUND_MASK_CD;
2056 rc = IOCTL_OUT(arg, data);
2057 break;
2058 case SOUND_MIXER_WRITE_RECSRC:
2059 IOCTL_IN(arg, data);
2060 data &= (SOUND_MASK_LINE
2061 | SOUND_MASK_MIC | SOUND_MASK_CD);
2062 awacs_reg[0] &= ~(MASK_MUX_CD | MASK_MUX_MIC
2063 | MASK_MUX_AUDIN);
2064 if (data & SOUND_MASK_LINE)
2065 awacs_reg[0] |= MASK_MUX_AUDIN;
2066 if (data & SOUND_MASK_MIC)
2067 awacs_reg[0] |= MASK_MUX_MIC;
2068 if (data & SOUND_MASK_CD)
2069 awacs_reg[0] |= MASK_MUX_CD;
2070 awacs_write(awacs_reg[0] | MASK_ADDR0);
2071 rc = IOCTL_OUT(arg, data);
2072 break;
2073 case SOUND_MIXER_READ_STEREODEVS:
2074 data = SOUND_MASK_VOLUME | SOUND_MASK_SPEAKER
2075 | SOUND_MASK_RECLEV | SOUND_MASK_CD
2076 | SOUND_MASK_LINE;
2077 rc = IOCTL_OUT(arg, data);
2078 break;
2079 case SOUND_MIXER_READ_CAPS:
2080 rc = IOCTL_OUT(arg, 0);
2081 break;
2082 case SOUND_MIXER_WRITE_VOLUME:
2083 IOCTL_IN(arg, data);
2084 awacs_burgundy_write_mvolume(MASK_ADDR_BURGUNDY_MASTER_VOLUME, data);
2085 /* Fall through */
2086 case SOUND_MIXER_READ_VOLUME:
2087 rc = IOCTL_OUT(arg, awacs_burgundy_read_mvolume(MASK_ADDR_BURGUNDY_MASTER_VOLUME));
2088 break;
2089 case SOUND_MIXER_WRITE_SPEAKER:
2090 IOCTL_IN(arg, data);
2091 if (!(data & 0xff)) {
2092 /* Mute the left speaker */
2093 awacs_burgundy_wcb(MASK_ADDR_BURGUNDY_MORE_OUTPUTENABLES,
2094 awacs_burgundy_rcb(MASK_ADDR_BURGUNDY_MORE_OUTPUTENABLES) & ~0x2);
2095 } else {
2096 /* Unmute the left speaker */
2097 awacs_burgundy_wcb(MASK_ADDR_BURGUNDY_MORE_OUTPUTENABLES,
2098 awacs_burgundy_rcb(MASK_ADDR_BURGUNDY_MORE_OUTPUTENABLES) | 0x2);
2099 }
2100 if (!(data & 0xff00)) {
2101 /* Mute the right speaker */
2102 awacs_burgundy_wcb(MASK_ADDR_BURGUNDY_MORE_OUTPUTENABLES,
2103 awacs_burgundy_rcb(MASK_ADDR_BURGUNDY_MORE_OUTPUTENABLES) & ~0x4);
2104 } else {
2105 /* Unmute the right speaker */
2106 awacs_burgundy_wcb(MASK_ADDR_BURGUNDY_MORE_OUTPUTENABLES,
2107 awacs_burgundy_rcb(MASK_ADDR_BURGUNDY_MORE_OUTPUTENABLES) | 0x4);
2108 }
2109
2110 data = (((data&0xff)*16)/100 > 0xf ? 0xf :
2111 (((data&0xff)*16)/100)) +
2112 ((((data>>8)*16)/100 > 0xf ? 0xf :
2113 ((((data>>8)*16)/100)))<<4);
2114
2115 awacs_burgundy_wcb(MASK_ADDR_BURGUNDY_ATTENSPEAKER, ~data);
2116 /* Fall through */
2117 case SOUND_MIXER_READ_SPEAKER:
2118 data = awacs_burgundy_rcb(MASK_ADDR_BURGUNDY_ATTENSPEAKER);
2119 data = (((data & 0xf)*100)/16) + ((((data>>4)*100)/16)<<8);
2120 rc = IOCTL_OUT(arg, (~data) & 0x0000ffff);
2121 break;
2122 case SOUND_MIXER_WRITE_ALTPCM: /* really bell volume */
2123 IOCTL_IN(arg, data);
2124 beep_vol = data & 0xff;
2125 /* fall through */
2126 case SOUND_MIXER_READ_ALTPCM:
2127 rc = IOCTL_OUT(arg, beep_vol);
2128 break;
2129 case SOUND_MIXER_WRITE_LINE:
2130 IOCTL_IN(arg, data);
2131 awacs_burgundy_write_volume(MASK_ADDR_BURGUNDY_VOLLINE, data);
2132
2133 /* fall through */
2134 case SOUND_MIXER_READ_LINE:
2135 data = awacs_burgundy_read_volume(MASK_ADDR_BURGUNDY_VOLLINE);
2136 rc = IOCTL_OUT(arg, data);
2137 break;
2138 case SOUND_MIXER_WRITE_MIC:
2139 IOCTL_IN(arg, data);
2140 /* Mic is mono device */
2141 data = (data << 8) + (data << 24);
2142 awacs_burgundy_write_volume(MASK_ADDR_BURGUNDY_VOLMIC, data);
2143 /* fall through */
2144 case SOUND_MIXER_READ_MIC:
2145 data = awacs_burgundy_read_volume(MASK_ADDR_BURGUNDY_VOLMIC);
2146 data <<= 24;
2147 rc = IOCTL_OUT(arg, data);
2148 break;
2149 case SOUND_MIXER_WRITE_CD:
2150 IOCTL_IN(arg, data);
2151 awacs_burgundy_write_volume(MASK_ADDR_BURGUNDY_VOLCD, data);
2152 /* fall through */
2153 case SOUND_MIXER_READ_CD:
2154 data = awacs_burgundy_read_volume(MASK_ADDR_BURGUNDY_VOLCD);
2155 rc = IOCTL_OUT(arg, data);
2156 break;
2157 case SOUND_MIXER_WRITE_RECLEV:
2158 IOCTL_IN(arg, data);
2159 data = awacs_volume_setter(data, 0, 0, 4);
2160 rc = IOCTL_OUT(arg, data);
2161 break;
2162 case SOUND_MIXER_READ_RECLEV:
2163 data = awacs_get_volume(awacs_reg[0], 4);
2164 rc = IOCTL_OUT(arg, data);
2165 break;
2166 case SOUND_MIXER_OUTMASK:
2167 case SOUND_MIXER_OUTSRC:
2168 default:
2169 rc = -EINVAL;
2170 }
2171
2172 return rc;
2173 }
2174
2175 static int daca_mixer_ioctl(u_int cmd, u_long arg)
2176 {
2177 int data;
2178 int rc;
2179
2180 /* And the DACA's no genius either! */
2181
2182 switch(cmd) {
2183 case SOUND_MIXER_READ_DEVMASK:
2184 data = SOUND_MASK_VOLUME;
2185 rc = IOCTL_OUT(arg, data);
2186 break;
2187 case SOUND_MIXER_READ_RECMASK:
2188 data = 0;
2189 rc = IOCTL_OUT(arg, data);
2190 break;
2191 case SOUND_MIXER_READ_RECSRC:
2192 data = 0;
2193 rc = IOCTL_OUT(arg, data);
2194 break;
2195 case SOUND_MIXER_WRITE_RECSRC:
2196 IOCTL_IN(arg, data);
2197 data =0;
2198 rc = IOCTL_OUT(arg, data);
2199 break;
2200 case SOUND_MIXER_READ_STEREODEVS:
2201 data = SOUND_MASK_VOLUME;
2202 rc = IOCTL_OUT(arg, data);
2203 break;
2204 case SOUND_MIXER_READ_CAPS:
2205 rc = IOCTL_OUT(arg, 0);
2206 break;
2207 case SOUND_MIXER_WRITE_VOLUME:
2208 IOCTL_IN(arg, data);
2209 daca_set_volume(data, data);
2210 /* Fall through */
2211 case SOUND_MIXER_READ_VOLUME:
2212 daca_get_volume(& data, &data);
2213 rc = IOCTL_OUT(arg, data);
2214 break;
2215 case SOUND_MIXER_OUTMASK:
2216 case SOUND_MIXER_OUTSRC:
2217 default:
2218 rc = -EINVAL;
2219 }
2220 return rc;
2221 }
2222
2223 static int PMacMixerIoctl(u_int cmd, u_long arg)
2224 {
2225 int rc;
2226
2227 /* Different IOCTLS for burgundy and, eventually, DACA & Tumbler */
2228
2229 TRY_LOCK();
2230
2231 switch (awacs_revision){
2232 case AWACS_BURGUNDY:
2233 rc = burgundy_mixer_ioctl(cmd, arg);
2234 break ;
2235 case AWACS_DACA:
2236 rc = daca_mixer_ioctl(cmd, arg);
2237 break;
2238 case AWACS_TUMBLER:
2239 case AWACS_SNAPPER:
2240 rc = tas_mixer_ioctl(cmd, arg);
2241 break ;
2242 default: /* ;-)) */
2243 rc = awacs_mixer_ioctl(cmd, arg);
2244 }
2245
2246 UNLOCK();
2247
2248 return rc;
2249 }
2250
2251 static void PMacMixerInit(void)
2252 {
2253 switch (awacs_revision) {
2254 case AWACS_TUMBLER:
2255 printk("AE-Init tumbler mixer\n");
2256 break ;
2257 case AWACS_SNAPPER:
2258 printk("AE-Init snapper mixer\n");
2259 break ;
2260 case AWACS_DACA:
2261 case AWACS_BURGUNDY:
2262 break ; /* don't know yet */
2263 case AWACS_AWACS:
2264 case AWACS_SCREAMER:
2265 default:
2266 awacs_mixer_init() ;
2267 break ;
2268 }
2269 }
2270
2271 /* Write/Read sq setup functions:
2272 Check to see if we have enough (or any) dbdma cmd buffers for the
2273 user's fragment settings. If not, allocate some. If this fails we will
2274 point at the beep buffer - as an emergency provision - to stop dma tromping
2275 on some random bit of memory (if someone lets it go anyway).
2276 The command buffers are then set up to point to the fragment buffers
2277 (allocated elsewhere). We need n+1 commands the last of which holds
2278 a NOP + loop to start.
2279 */
2280
2281 static int PMacWriteSqSetup(void)
2282 {
2283 int i, count = 600 ;
2284 volatile struct dbdma_cmd *cp;
2285
2286 LOCK();
2287
2288 /* stop the controller from doing any output - if it isn't already.
2289 it _should_ be before this is called anyway */
2290
2291 out_le32(&awacs_txdma->control, (RUN|PAUSE|FLUSH|WAKE) << 16);
2292 while ((in_le32(&awacs_txdma->status) & RUN) && count--)
2293 udelay(1);
2294 #ifdef DEBUG_DMASOUND
2295 if (count <= 0)
2296 printk("dmasound_pmac: write sq setup: timeout waiting for dma to stop\n");
2297 #endif
2298
2299 if ((write_sq.max_count + 1) > number_of_tx_cmd_buffers) {
2300 kfree(awacs_tx_cmd_space);
2301 number_of_tx_cmd_buffers = 0;
2302
2303 /* we need nbufs + 1 (for the loop) and we should request + 1
2304 again because the DBDMA_ALIGN might pull the start up by up
2305 to sizeof(struct dbdma_cmd) - 4.
2306 */
2307
2308 awacs_tx_cmd_space = kmalloc
2309 ((write_sq.max_count + 1 + 1) * sizeof(struct dbdma_cmd),
2310 GFP_KERNEL);
2311 if (awacs_tx_cmd_space == NULL) {
2312 /* don't leave it dangling - nasty but better than a
2313 random address */
2314 out_le32(&awacs_txdma->cmdptr, virt_to_bus(beep_dbdma_cmd));
2315 printk(KERN_ERR
2316 "dmasound_pmac: can't allocate dbdma cmd buffers"
2317 ", driver disabled\n");
2318 UNLOCK();
2319 return -ENOMEM;
2320 }
2321 awacs_tx_cmds = (volatile struct dbdma_cmd *)
2322 DBDMA_ALIGN(awacs_tx_cmd_space);
2323 number_of_tx_cmd_buffers = write_sq.max_count + 1;
2324 }
2325
2326 cp = awacs_tx_cmds;
2327 memset((void *)cp, 0, (write_sq.max_count+1) * sizeof(struct dbdma_cmd));
2328 for (i = 0; i < write_sq.max_count; ++i, ++cp) {
2329 st_le32(&cp->phy_addr, virt_to_bus(write_sq.buffers[i]));
2330 }
2331 st_le16(&cp->command, DBDMA_NOP + BR_ALWAYS);
2332 st_le32(&cp->cmd_dep, virt_to_bus(awacs_tx_cmds));
2333 /* point the controller at the command stack - ready to go */
2334 out_le32(&awacs_txdma->cmdptr, virt_to_bus(awacs_tx_cmds));
2335 UNLOCK();
2336 return 0;
2337 }
2338
2339 static int PMacReadSqSetup(void)
2340 {
2341 int i, count = 600;
2342 volatile struct dbdma_cmd *cp;
2343
2344 LOCK();
2345
2346 /* stop the controller from doing any input - if it isn't already.
2347 it _should_ be before this is called anyway */
2348
2349 out_le32(&awacs_rxdma->control, (RUN|PAUSE|FLUSH|WAKE) << 16);
2350 while ((in_le32(&awacs_rxdma->status) & RUN) && count--)
2351 udelay(1);
2352 #ifdef DEBUG_DMASOUND
2353 if (count <= 0)
2354 printk("dmasound_pmac: read sq setup: timeout waiting for dma to stop\n");
2355 #endif
2356
2357 if ((read_sq.max_count+1) > number_of_rx_cmd_buffers ) {
2358 kfree(awacs_rx_cmd_space);
2359 number_of_rx_cmd_buffers = 0;
2360
2361 /* we need nbufs + 1 (for the loop) and we should request + 1 again
2362 because the DBDMA_ALIGN might pull the start up by up to
2363 sizeof(struct dbdma_cmd) - 4 (assuming kmalloc aligns 32 bits).
2364 */
2365
2366 awacs_rx_cmd_space = kmalloc
2367 ((read_sq.max_count + 1 + 1) * sizeof(struct dbdma_cmd),
2368 GFP_KERNEL);
2369 if (awacs_rx_cmd_space == NULL) {
2370 /* don't leave it dangling - nasty but better than a
2371 random address */
2372 out_le32(&awacs_rxdma->cmdptr, virt_to_bus(beep_dbdma_cmd));
2373 printk(KERN_ERR
2374 "dmasound_pmac: can't allocate dbdma cmd buffers"
2375 ", driver disabled\n");
2376 UNLOCK();
2377 return -ENOMEM;
2378 }
2379 awacs_rx_cmds = (volatile struct dbdma_cmd *)
2380 DBDMA_ALIGN(awacs_rx_cmd_space);
2381 number_of_rx_cmd_buffers = read_sq.max_count + 1 ;
2382 }
2383 cp = awacs_rx_cmds;
2384 memset((void *)cp, 0, (read_sq.max_count+1) * sizeof(struct dbdma_cmd));
2385
2386 /* Set dma buffers up in a loop */
2387 for (i = 0; i < read_sq.max_count; i++,cp++) {
2388 st_le32(&cp->phy_addr, virt_to_bus(read_sq.buffers[i]));
2389 st_le16(&cp->command, INPUT_MORE + INTR_ALWAYS);
2390 st_le16(&cp->req_count, read_sq.block_size);
2391 st_le16(&cp->xfer_status, 0);
2392 }
2393
2394 /* The next two lines make the thing loop around.
2395 */
2396 st_le16(&cp->command, DBDMA_NOP + BR_ALWAYS);
2397 st_le32(&cp->cmd_dep, virt_to_bus(awacs_rx_cmds));
2398 /* point the controller at the command stack - ready to go */
2399 out_le32(&awacs_rxdma->cmdptr, virt_to_bus(awacs_rx_cmds));
2400
2401 UNLOCK();
2402 return 0;
2403 }
2404
2405 /* TODO: this needs work to guarantee that when it returns DMA has stopped
2406 but in a more elegant way than is done here....
2407 */
2408
2409 static void PMacAbortRead(void)
2410 {
2411 int i;
2412 volatile struct dbdma_cmd *cp;
2413
2414 LOCK();
2415 /* give it a chance to update the output and provide the IRQ
2416 that is expected.
2417 */
2418
2419 out_le32(&awacs_rxdma->control, ((FLUSH) << 16) + FLUSH );
2420
2421 cp = awacs_rx_cmds;
2422 for (i = 0; i < read_sq.max_count; i++,cp++)
2423 st_le16(&cp->command, DBDMA_STOP);
2424 /*
2425 * We should probably wait for the thing to stop before we
2426 * release the memory.
2427 */
2428
2429 msleep(100) ; /* give it a (small) chance to act */
2430
2431 /* apply the sledgehammer approach - just stop it now */
2432
2433 out_le32(&awacs_rxdma->control, (RUN|PAUSE|FLUSH|WAKE) << 16);
2434 UNLOCK();
2435 }
2436
2437 extern char *get_afmt_string(int);
2438 static int PMacStateInfo(char *b, size_t sp)
2439 {
2440 int i, len = 0;
2441 len = sprintf(b,"HW rates: ");
2442 switch (awacs_revision){
2443 case AWACS_DACA:
2444 case AWACS_BURGUNDY:
2445 len += sprintf(b,"44100 ") ;
2446 break ;
2447 case AWACS_TUMBLER:
2448 case AWACS_SNAPPER:
2449 for (i=0; i<1; i++){
2450 if (tas_freqs_ok[i])
2451 len += sprintf(b+len,"%d ", tas_freqs[i]) ;
2452 }
2453 break ;
2454 case AWACS_AWACS:
2455 case AWACS_SCREAMER:
2456 default:
2457 for (i=0; i<8; i++){
2458 if (awacs_freqs_ok[i])
2459 len += sprintf(b+len,"%d ", awacs_freqs[i]) ;
2460 }
2461 break ;
2462 }
2463 len += sprintf(b+len,"s/sec\n") ;
2464 if (len < sp) {
2465 len += sprintf(b+len,"HW AFMTS: ");
2466 i = AFMT_U16_BE ;
2467 while (i) {
2468 if (i & dmasound.mach.hardware_afmts)
2469 len += sprintf(b+len,"%s ",
2470 get_afmt_string(i & dmasound.mach.hardware_afmts));
2471 i >>= 1 ;
2472 }
2473 len += sprintf(b+len,"\n") ;
2474 }
2475 return len ;
2476 }
2477
2478 /*** Machine definitions *****************************************************/
2479
2480 static SETTINGS def_hard = {
2481 .format = AFMT_S16_BE,
2482 .stereo = 1,
2483 .size = 16,
2484 .speed = 44100
2485 } ;
2486
2487 static SETTINGS def_soft = {
2488 .format = AFMT_S16_BE,
2489 .stereo = 1,
2490 .size = 16,
2491 .speed = 44100
2492 } ;
2493
2494 static MACHINE machPMac = {
2495 .name = awacs_name,
2496 .name2 = "PowerMac Built-in Sound",
2497 .owner = THIS_MODULE,
2498 .dma_alloc = PMacAlloc,
2499 .dma_free = PMacFree,
2500 .irqinit = PMacIrqInit,
2501 #ifdef MODULE
2502 .irqcleanup = PMacIrqCleanup,
2503 #endif /* MODULE */
2504 .init = PMacInit,
2505 .silence = PMacSilence,
2506 .setFormat = PMacSetFormat,
2507 .setVolume = PMacSetVolume,
2508 .play = PMacPlay,
2509 .record = NULL, /* default to no record */
2510 .mixer_init = PMacMixerInit,
2511 .mixer_ioctl = PMacMixerIoctl,
2512 .write_sq_setup = PMacWriteSqSetup,
2513 .read_sq_setup = PMacReadSqSetup,
2514 .state_info = PMacStateInfo,
2515 .abort_read = PMacAbortRead,
2516 .min_dsp_speed = 7350,
2517 .max_dsp_speed = 44100,
2518 .version = ((DMASOUND_AWACS_REVISION<<8) + DMASOUND_AWACS_EDITION)
2519 };
2520
2521
2522 /*** Config & Setup **********************************************************/
2523
2524 /* Check for pmac models that we care about in terms of special actions.
2525 */
2526
2527 void __init
2528 set_model(void)
2529 {
2530 /* portables/lap-tops */
2531
2532 if (machine_is_compatible("AAPL,3400/2400") ||
2533 machine_is_compatible("AAPL,3500")) {
2534 is_pbook_3X00 = 1 ;
2535 }
2536 if (machine_is_compatible("PowerBook1,1") || /* lombard */
2537 machine_is_compatible("AAPL,PowerBook1998")){ /* wallstreet */
2538 is_pbook_g3 = 1 ;
2539 return ;
2540 }
2541 }
2542
2543 /* Get the OF node that tells us about the registers, interrupts etc. to use
2544 for sound IO.
2545
2546 On most machines the sound IO OF node is the 'davbus' node. On newer pmacs
2547 with DACA (& Tumbler) the node to use is i2s-a. On much older machines i.e.
2548 before 9500 there is no davbus node and we have to use the 'awacs' property.
2549
2550 In the latter case we signal this by setting the codec value - so that the
2551 code that looks for chip properties knows how to go about it.
2552 */
2553
2554 static struct device_node* __init
2555 get_snd_io_node(void)
2556 {
2557 struct device_node *np = NULL;
2558
2559 /* set up awacs_node for early OF which doesn't have a full set of
2560 * properties on davbus
2561 */
2562
2563 awacs_node = find_devices("awacs");
2564 if (awacs_node)
2565 awacs_revision = AWACS_AWACS;
2566
2567 /* powermac models after 9500 (other than those which use DACA or
2568 * Tumbler) have a node called "davbus".
2569 */
2570 np = find_devices("davbus");
2571 /*
2572 * if we didn't find a davbus device, try 'i2s-a' since
2573 * this seems to be what iBooks (& Tumbler) have.
2574 */
2575 if (np == NULL)
2576 np = i2s_node = find_devices("i2s-a");
2577
2578 /* if we didn't find this - perhaps we are on an early model
2579 * which _only_ has an 'awacs' node
2580 */
2581 if (np == NULL && awacs_node)
2582 np = awacs_node ;
2583
2584 /* if we failed all these return null - this will cause the
2585 * driver to give up...
2586 */
2587 return np ;
2588 }
2589
2590 /* Get the OF node that contains the info about the sound chip, inputs s-rates
2591 etc.
2592 This node does not exist (or contains much reduced info) on earlier machines
2593 we have to deduce the info other ways for these.
2594 */
2595
2596 static struct device_node* __init
2597 get_snd_info_node(struct device_node *io)
2598 {
2599 struct device_node *info;
2600
2601 info = find_devices("sound");
2602 while (info && info->parent != io)
2603 info = info->next;
2604 return info;
2605 }
2606
2607 /* Find out what type of codec we have.
2608 */
2609
2610 static int __init
2611 get_codec_type(struct device_node *info)
2612 {
2613 /* already set if pre-davbus model and info will be NULL */
2614 int codec = awacs_revision ;
2615
2616 if (info) {
2617 /* must do awacs first to allow screamer to overide it */
2618 if (device_is_compatible(info, "awacs"))
2619 codec = AWACS_AWACS ;
2620 if (device_is_compatible(info, "screamer"))
2621 codec = AWACS_SCREAMER;
2622 if (device_is_compatible(info, "burgundy"))
2623 codec = AWACS_BURGUNDY ;
2624 if (device_is_compatible(info, "daca"))
2625 codec = AWACS_DACA;
2626 if (device_is_compatible(info, "tumbler"))
2627 codec = AWACS_TUMBLER;
2628 if (device_is_compatible(info, "snapper"))
2629 codec = AWACS_SNAPPER;
2630 }
2631 return codec ;
2632 }
2633
2634 /* find out what type, if any, of expansion card we have
2635 */
2636 static void __init
2637 get_expansion_type(void)
2638 {
2639 if (find_devices("perch") != NULL)
2640 has_perch = 1;
2641
2642 if (find_devices("pb-ziva-pc") != NULL)
2643 has_ziva = 1;
2644 /* need to work out how we deal with iMac SRS module */
2645 }
2646
2647 /* set up frame rates.
2648 * I suspect that these routines don't quite go about it the right way:
2649 * - where there is more than one rate - I think that the first property
2650 * value is the number of rates.
2651 * TODO: check some more device trees and modify accordingly
2652 * Set dmasound.mach.max_dsp_rate on the basis of these routines.
2653 */
2654
2655 static void __init
2656 awacs_init_frame_rates(unsigned int *prop, unsigned int l)
2657 {
2658 int i ;
2659 if (prop) {
2660 for (i=0; i<8; i++)
2661 awacs_freqs_ok[i] = 0 ;
2662 for (l /= sizeof(int); l > 0; --l) {
2663 unsigned int r = *prop++;
2664 /* Apple 'Fixed' format */
2665 if (r >= 0x10000)
2666 r >>= 16;
2667 for (i = 0; i < 8; ++i) {
2668 if (r == awacs_freqs[i]) {
2669 awacs_freqs_ok[i] = 1;
2670 break;
2671 }
2672 }
2673 }
2674 }
2675 /* else we assume that all the rates are available */
2676 }
2677
2678 static void __init
2679 burgundy_init_frame_rates(unsigned int *prop, unsigned int l)
2680 {
2681 int temp[9] ;
2682 int i = 0 ;
2683 if (prop) {
2684 for (l /= sizeof(int); l > 0; --l) {
2685 unsigned int r = *prop++;
2686 /* Apple 'Fixed' format */
2687 if (r >= 0x10000)
2688 r >>= 16;
2689 temp[i] = r ;
2690 i++ ; if(i>=9) i=8;
2691 }
2692 }
2693 #ifdef DEBUG_DMASOUND
2694 if (i > 1){
2695 int j;
2696 printk("dmasound_pmac: burgundy with multiple frame rates\n");
2697 for(j=0; j<i; j++)
2698 printk("%d ", temp[j]) ;
2699 printk("\n") ;
2700 }
2701 #endif
2702 }
2703
2704 static void __init
2705 daca_init_frame_rates(unsigned int *prop, unsigned int l)
2706 {
2707 int temp[9] ;
2708 int i = 0 ;
2709 if (prop) {
2710 for (l /= sizeof(int); l > 0; --l) {
2711 unsigned int r = *prop++;
2712 /* Apple 'Fixed' format */
2713 if (r >= 0x10000)
2714 r >>= 16;
2715 temp[i] = r ;
2716 i++ ; if(i>=9) i=8;
2717
2718 }
2719 }
2720 #ifdef DEBUG_DMASOUND
2721 if (i > 1){
2722 int j;
2723 printk("dmasound_pmac: DACA with multiple frame rates\n");
2724 for(j=0; j<i; j++)
2725 printk("%d ", temp[j]) ;
2726 printk("\n") ;
2727 }
2728 #endif
2729 }
2730
2731 static void __init
2732 init_frame_rates(unsigned int *prop, unsigned int l)
2733 {
2734 switch (awacs_revision) {
2735 case AWACS_TUMBLER:
2736 case AWACS_SNAPPER:
2737 tas_init_frame_rates(prop, l);
2738 break ;
2739 case AWACS_DACA:
2740 daca_init_frame_rates(prop, l);
2741 break ;
2742 case AWACS_BURGUNDY:
2743 burgundy_init_frame_rates(prop, l);
2744 break ;
2745 default:
2746 awacs_init_frame_rates(prop, l);
2747 break ;
2748 }
2749 }
2750
2751 /* find things/machines that can't do mac-io byteswap
2752 */
2753
2754 static void __init
2755 set_hw_byteswap(struct device_node *io)
2756 {
2757 struct device_node *mio ;
2758 unsigned int kl = 0 ;
2759
2760 /* if seems that Keylargo can't byte-swap */
2761
2762 for (mio = io->parent; mio ; mio = mio->parent) {
2763 if (strcmp(mio->name, "mac-io") == 0) {
2764 if (device_is_compatible(mio, "Keylargo"))
2765 kl = 1;
2766 break;
2767 }
2768 }
2769 hw_can_byteswap = !kl;
2770 }
2771
2772 /* Allocate the resources necessary for beep generation. This cannot be (quite)
2773 done statically (yet) because we cannot do virt_to_bus() on static vars when
2774 the code is loaded as a module.
2775
2776 for the sake of saving the possibility that two allocations will incur the
2777 overhead of two pull-ups in DBDMA_ALIGN() we allocate the 'emergency' dmdma
2778 command here as well... even tho' it is not part of the beep process.
2779 */
2780
2781 int32_t
2782 __init setup_beep(void)
2783 {
2784 /* Initialize beep stuff */
2785 /* want one cmd buffer for beeps, and a second one for emergencies
2786 - i.e. dbdma error conditions.
2787 ask for three to allow for pull up in DBDMA_ALIGN().
2788 */
2789 beep_dbdma_cmd_space =
2790 kmalloc((2 + 1) * sizeof(struct dbdma_cmd), GFP_KERNEL);
2791 if(beep_dbdma_cmd_space == NULL) {
2792 printk(KERN_ERR "dmasound_pmac: no beep dbdma cmd space\n") ;
2793 return -ENOMEM ;
2794 }
2795 beep_dbdma_cmd = (volatile struct dbdma_cmd *)
2796 DBDMA_ALIGN(beep_dbdma_cmd_space);
2797 /* set up emergency dbdma cmd */
2798 emergency_dbdma_cmd = beep_dbdma_cmd+1 ;
2799 beep_buf = (short *) kmalloc(BEEP_BUFLEN * 4, GFP_KERNEL);
2800 if (beep_buf == NULL) {
2801 printk(KERN_ERR "dmasound_pmac: no memory for beep buffer\n");
2802 kfree(beep_dbdma_cmd_space) ;
2803 return -ENOMEM ;
2804 }
2805 return 0 ;
2806 }
2807
2808 static struct input_dev awacs_beep_dev = {
2809 .evbit = { BIT(EV_SND) },
2810 .sndbit = { BIT(SND_BELL) | BIT(SND_TONE) },
2811 .event = awacs_beep_event,
2812 .name = "dmasound beeper",
2813 .phys = "macio/input0", /* what the heck is this?? */
2814 .id = {
2815 .bustype = BUS_HOST,
2816 },
2817 };
2818
2819 int __init dmasound_awacs_init(void)
2820 {
2821 struct device_node *io = NULL, *info = NULL;
2822 int vol, res;
2823
2824 if (_machine != _MACH_Pmac)
2825 return -ENODEV;
2826
2827 awacs_subframe = 0;
2828 awacs_revision = 0;
2829 hw_can_byteswap = 1 ; /* most can */
2830
2831 /* look for models we need to handle specially */
2832 set_model() ;
2833
2834 /* find the OF node that tells us about the dbdma stuff
2835 */
2836 io = get_snd_io_node();
2837 if (io == NULL) {
2838 #ifdef DEBUG_DMASOUND
2839 printk("dmasound_pmac: couldn't find sound io OF node\n");
2840 #endif
2841 return -ENODEV ;
2842 }
2843
2844 /* find the OF node that tells us about the sound sub-system
2845 * this doesn't exist on pre-davbus machines (earlier than 9500)
2846 */
2847 if (awacs_revision != AWACS_AWACS) { /* set for pre-davbus */
2848 info = get_snd_info_node(io) ;
2849 if (info == NULL){
2850 #ifdef DEBUG_DMASOUND
2851 printk("dmasound_pmac: couldn't find 'sound' OF node\n");
2852 #endif
2853 return -ENODEV ;
2854 }
2855 }
2856
2857 awacs_revision = get_codec_type(info) ;
2858 if (awacs_revision == 0) {
2859 #ifdef DEBUG_DMASOUND
2860 printk("dmasound_pmac: couldn't find a Codec we can handle\n");
2861 #endif
2862 return -ENODEV ; /* we don't know this type of h/w */
2863 }
2864
2865 /* set up perch, ziva, SRS or whatever else we have as sound
2866 * expansion.
2867 */
2868 get_expansion_type();
2869
2870 /* we've now got enough information to make up the audio topology.
2871 * we will map the sound part of mac-io now so that we can probe for
2872 * other info if necessary (early AWACS we want to read chip ids)
2873 */
2874
2875 if (io->n_addrs < 3 || io->n_intrs < 3) {
2876 /* OK - maybe we need to use the 'awacs' node (on earlier
2877 * machines).
2878 */
2879 if (awacs_node) {
2880 io = awacs_node ;
2881 if (io->n_addrs < 3 || io->n_intrs < 3) {
2882 printk("dmasound_pmac: can't use %s"
2883 " (%d addrs, %d intrs)\n",
2884 io->full_name, io->n_addrs, io->n_intrs);
2885 return -ENODEV;
2886 }
2887 } else {
2888 printk("dmasound_pmac: can't use %s (%d addrs, %d intrs)\n",
2889 io->full_name, io->n_addrs, io->n_intrs);
2890 }
2891 }
2892
2893 if (!request_OF_resource(io, 0, NULL)) {
2894 printk(KERN_ERR "dmasound: can't request IO resource !\n");
2895 return -ENODEV;
2896 }
2897 if (!request_OF_resource(io, 1, " (tx dma)")) {
2898 release_OF_resource(io, 0);
2899 printk(KERN_ERR "dmasound: can't request TX DMA resource !\n");
2900 return -ENODEV;
2901 }
2902
2903 if (!request_OF_resource(io, 2, " (rx dma)")) {
2904 release_OF_resource(io, 0);
2905 release_OF_resource(io, 1);
2906 printk(KERN_ERR "dmasound: can't request RX DMA resource !\n");
2907 return -ENODEV;
2908 }
2909
2910 /* all OF versions I've seen use this value */
2911 if (i2s_node)
2912 i2s = ioremap(io->addrs[0].address, 0x1000);
2913 else
2914 awacs = ioremap(io->addrs[0].address, 0x1000);
2915 awacs_txdma = ioremap(io->addrs[1].address, 0x100);
2916 awacs_rxdma = ioremap(io->addrs[2].address, 0x100);
2917
2918 /* first of all make sure that the chip is powered up....*/
2919 pmac_call_feature(PMAC_FTR_SOUND_CHIP_ENABLE, io, 0, 1);
2920 if (awacs_revision == AWACS_SCREAMER && awacs)
2921 awacs_recalibrate();
2922
2923 awacs_irq = io->intrs[0].line;
2924 awacs_tx_irq = io->intrs[1].line;
2925 awacs_rx_irq = io->intrs[2].line;
2926
2927 /* Hack for legacy crap that will be killed someday */
2928 awacs_node = io;
2929
2930 /* if we have an awacs or screamer - probe the chip to make
2931 * sure we have the right revision.
2932 */
2933
2934 if (awacs_revision <= AWACS_SCREAMER){
2935 uint32_t temp, rev, mfg ;
2936 /* find out the awacs revision from the chip */
2937 temp = in_le32(&awacs->codec_stat);
2938 rev = (temp >> 12) & 0xf;
2939 mfg = (temp >> 8) & 0xf;
2940 #ifdef DEBUG_DMASOUND
2941 printk("dmasound_pmac: Awacs/Screamer Codec Mfct: %d Rev %d\n", mfg, rev);
2942 #endif
2943 if (rev >= AWACS_SCREAMER)
2944 awacs_revision = AWACS_SCREAMER ;
2945 else
2946 awacs_revision = rev ;
2947 }
2948
2949 dmasound.mach = machPMac;
2950
2951 /* find out other bits & pieces from OF, these may be present
2952 only on some models ... so be careful.
2953 */
2954
2955 /* in the absence of a frame rates property we will use the defaults
2956 */
2957
2958 if (info) {
2959 unsigned int *prop, l;
2960
2961 sound_device_id = 0;
2962 /* device ID appears post g3 b&w */
2963 prop = (unsigned int *)get_property(info, "device-id", NULL);
2964 if (prop != 0)
2965 sound_device_id = *prop;
2966
2967 /* look for a property saying what sample rates
2968 are available */
2969
2970 prop = (unsigned int *)get_property(info, "sample-rates", &l);
2971 if (prop == 0)
2972 prop = (unsigned int *) get_property
2973 (info, "output-frame-rates", &l);
2974
2975 /* if it's there use it to set up frame rates */
2976 init_frame_rates(prop, l) ;
2977 }
2978
2979 if (awacs)
2980 out_le32(&awacs->control, 0x11); /* set everything quiesent */
2981
2982 set_hw_byteswap(io) ; /* figure out if the h/w can do it */
2983
2984 #ifdef CONFIG_NVRAM
2985 /* get default volume from nvram */
2986 vol = ((pmac_xpram_read( 8 ) & 7 ) << 1 );
2987 #else
2988 vol = 0;
2989 #endif
2990
2991 /* set up tracking values */
2992 spk_vol = vol * 100 ;
2993 spk_vol /= 7 ; /* get set value to a percentage */
2994 spk_vol |= (spk_vol << 8) ; /* equal left & right */
2995 line_vol = passthru_vol = spk_vol ;
2996
2997 /* fill regs that are shared between AWACS & Burgundy */
2998
2999 awacs_reg[2] = vol + (vol << 6);
3000 awacs_reg[4] = vol + (vol << 6);
3001 awacs_reg[5] = vol + (vol << 6); /* screamer has loopthru vol control */
3002 awacs_reg[6] = 0; /* maybe should be vol << 3 for PCMCIA speaker */
3003 awacs_reg[7] = 0;
3004
3005 awacs_reg[0] = MASK_MUX_CD;
3006 awacs_reg[1] = MASK_LOOPTHRU;
3007
3008 /* FIXME: Only machines with external SRS module need MASK_PAROUT */
3009 if (has_perch || sound_device_id == 0x5
3010 || /*sound_device_id == 0x8 ||*/ sound_device_id == 0xb)
3011 awacs_reg[1] |= MASK_PAROUT0 | MASK_PAROUT1;
3012
3013 switch (awacs_revision) {
3014 case AWACS_TUMBLER:
3015 tas_register_driver(&tas3001c_hooks);
3016 tas_init(I2C_DRIVERID_TAS3001C, I2C_DRIVERNAME_TAS3001C);
3017 tas_dmasound_init();
3018 tas_post_init();
3019 break ;
3020 case AWACS_SNAPPER:
3021 tas_register_driver(&tas3004_hooks);
3022 tas_init(I2C_DRIVERID_TAS3004,I2C_DRIVERNAME_TAS3004);
3023 tas_dmasound_init();
3024 tas_post_init();
3025 break;
3026 case AWACS_DACA:
3027 daca_init();
3028 break;
3029 case AWACS_BURGUNDY:
3030 awacs_burgundy_init();
3031 break ;
3032 case AWACS_SCREAMER:
3033 case AWACS_AWACS:
3034 default:
3035 load_awacs();
3036 break ;
3037 }
3038
3039 /* enable/set-up external modules - when we know how */
3040
3041 if (has_perch)
3042 awacs_enable_amp(100 * 0x101);
3043
3044 /* Reset dbdma channels */
3045 out_le32(&awacs_txdma->control, (RUN|PAUSE|FLUSH|WAKE|DEAD) << 16);
3046 while (in_le32(&awacs_txdma->status) & RUN)
3047 udelay(1);
3048 out_le32(&awacs_rxdma->control, (RUN|PAUSE|FLUSH|WAKE|DEAD) << 16);
3049 while (in_le32(&awacs_rxdma->status) & RUN)
3050 udelay(1);
3051
3052 /* Initialize beep stuff */
3053 if ((res=setup_beep()))
3054 return res ;
3055
3056 #ifdef CONFIG_PM
3057 pmu_register_sleep_notifier(&awacs_sleep_notifier);
3058 #endif /* CONFIG_PM */
3059
3060 /* Powerbooks have odd ways of enabling inputs such as
3061 an expansion-bay CD or sound from an internal modem
3062 or a PC-card modem. */
3063 if (is_pbook_3X00) {
3064 /*
3065 * Enable CD and PC-card sound inputs.
3066 * This is done by reading from address
3067 * f301a000, + 0x10 to enable the expansion-bay
3068 * CD sound input, + 0x80 to enable the PC-card
3069 * sound input. The 0x100 enables the SCSI bus
3070 * terminator power.
3071 */
3072 latch_base = ioremap (0xf301a000, 0x1000);
3073 in_8(latch_base + 0x190);
3074
3075 } else if (is_pbook_g3) {
3076 struct device_node* mio;
3077 macio_base = NULL;
3078 for (mio = io->parent; mio; mio = mio->parent) {
3079 if (strcmp(mio->name, "mac-io") == 0
3080 && mio->n_addrs > 0) {
3081 macio_base = ioremap(mio->addrs[0].address, 0x40);
3082 break;
3083 }
3084 }
3085 /*
3086 * Enable CD sound input.
3087 * The relevant bits for writing to this byte are 0x8f.
3088 * I haven't found out what the 0x80 bit does.
3089 * For the 0xf bits, writing 3 or 7 enables the CD
3090 * input, any other value disables it. Values
3091 * 1, 3, 5, 7 enable the microphone. Values 0, 2,
3092 * 4, 6, 8 - f enable the input from the modem.
3093 * -- paulus.
3094 */
3095 if (macio_base)
3096 out_8(macio_base + 0x37, 3);
3097 }
3098
3099 if (hw_can_byteswap)
3100 dmasound.mach.hardware_afmts = (AFMT_S16_BE | AFMT_S16_LE) ;
3101 else
3102 dmasound.mach.hardware_afmts = AFMT_S16_BE ;
3103
3104 /* shut out chips that do output only.
3105 * may need to extend this to machines which have no inputs - even tho'
3106 * they use screamer - IIRC one of the powerbooks is like this.
3107 */
3108
3109 if (awacs_revision != AWACS_DACA) {
3110 dmasound.mach.capabilities = DSP_CAP_DUPLEX ;
3111 dmasound.mach.record = PMacRecord ;
3112 }
3113
3114 dmasound.mach.default_hard = def_hard ;
3115 dmasound.mach.default_soft = def_soft ;
3116
3117 switch (awacs_revision) {
3118 case AWACS_BURGUNDY:
3119 sprintf(awacs_name, "PowerMac Burgundy ") ;
3120 break ;
3121 case AWACS_DACA:
3122 sprintf(awacs_name, "PowerMac DACA ") ;
3123 break ;
3124 case AWACS_TUMBLER:
3125 sprintf(awacs_name, "PowerMac Tumbler ") ;
3126 break ;
3127 case AWACS_SNAPPER:
3128 sprintf(awacs_name, "PowerMac Snapper ") ;
3129 break ;
3130 case AWACS_SCREAMER:
3131 sprintf(awacs_name, "PowerMac Screamer ") ;
3132 break ;
3133 case AWACS_AWACS:
3134 default:
3135 sprintf(awacs_name, "PowerMac AWACS rev %d ", awacs_revision) ;
3136 break ;
3137 }
3138
3139 /*
3140 * XXX: we should handle errors here, but that would mean
3141 * rewriting the whole init code. later..
3142 */
3143 input_register_device(&awacs_beep_dev);
3144
3145 return dmasound_init();
3146 }
3147
3148 static void __exit dmasound_awacs_cleanup(void)
3149 {
3150 input_unregister_device(&awacs_beep_dev);
3151
3152 switch (awacs_revision) {
3153 case AWACS_TUMBLER:
3154 case AWACS_SNAPPER:
3155 tas_dmasound_cleanup();
3156 tas_cleanup();
3157 break ;
3158 case AWACS_DACA:
3159 daca_cleanup();
3160 break;
3161 }
3162 dmasound_deinit();
3163
3164 }
3165
3166 MODULE_DESCRIPTION("PowerMac built-in audio driver.");
3167 MODULE_LICENSE("GPL");
3168
3169 module_init(dmasound_awacs_init);
3170 module_exit(dmasound_awacs_cleanup);
linux 2.6 git repository for openrd