| blob | 1f716d9f714b05b00d949891fd0b550e48fbee36 |
1 /*
2 * Char device interface.
3 *
4 * Copyright (C) 2005-2006 Kristian Hoegsberg <krh@bitplanet.net>
5 *
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License as published by
8 * the Free Software Foundation; either version 2 of the License, or
9 * (at your option) any later version.
10 *
11 * This program is distributed in the hope that it will be useful,
12 * but WITHOUT ANY WARRANTY; without even the implied warranty of
13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
14 * GNU General Public License for more details.
15 *
16 * You should have received a copy of the GNU General Public License
17 * along with this program; if not, write to the Free Software Foundation,
18 * Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
19 */
21 #ifndef _LINUX_FIREWIRE_CDEV_H
22 #define _LINUX_FIREWIRE_CDEV_H
24 #include <linux/ioctl.h>
25 #include <linux/types.h>
26 #include <linux/firewire-constants.h>
28 #define FW_CDEV_EVENT_BUS_RESET 0x00
29 #define FW_CDEV_EVENT_RESPONSE 0x01
30 #define FW_CDEV_EVENT_REQUEST 0x02
31 #define FW_CDEV_EVENT_ISO_INTERRUPT 0x03
32 #define FW_CDEV_EVENT_ISO_RESOURCE_ALLOCATED 0x04
33 #define FW_CDEV_EVENT_ISO_RESOURCE_DEALLOCATED 0x05
35 /**
36 * struct fw_cdev_event_common - Common part of all fw_cdev_event_ types
37 * @closure: For arbitrary use by userspace
38 * @type: Discriminates the fw_cdev_event_ types
39 *
40 * This struct may be used to access generic members of all fw_cdev_event_
41 * types regardless of the specific type.
42 *
43 * Data passed in the @closure field for a request will be returned in the
44 * corresponding event. It is big enough to hold a pointer on all platforms.
45 * The ioctl used to set @closure depends on the @type of event.
46 */
48 __u64 closure;
49 __u32 type;
50 };
52 /**
53 * struct fw_cdev_event_bus_reset - Sent when a bus reset occurred
54 * @closure: See &fw_cdev_event_common; set by %FW_CDEV_IOC_GET_INFO ioctl
55 * @type: See &fw_cdev_event_common; always %FW_CDEV_EVENT_BUS_RESET
56 * @node_id: New node ID of this node
57 * @local_node_id: Node ID of the local node, i.e. of the controller
58 * @bm_node_id: Node ID of the bus manager
59 * @irm_node_id: Node ID of the iso resource manager
60 * @root_node_id: Node ID of the root node
61 * @generation: New bus generation
62 *
63 * This event is sent when the bus the device belongs to goes through a bus
64 * reset. It provides information about the new bus configuration, such as
65 * new node ID for this device, new root ID, and others.
66 */
68 __u64 closure;
69 __u32 type;
70 __u32 node_id;
71 __u32 local_node_id;
72 __u32 bm_node_id;
73 __u32 irm_node_id;
74 __u32 root_node_id;
75 __u32 generation;
76 };
78 /**
79 * struct fw_cdev_event_response - Sent when a response packet was received
80 * @closure: See &fw_cdev_event_common;
81 * set by %FW_CDEV_IOC_SEND_REQUEST ioctl
82 * @type: See &fw_cdev_event_common; always %FW_CDEV_EVENT_RESPONSE
83 * @rcode: Response code returned by the remote node
84 * @length: Data length, i.e. the response's payload size in bytes
85 * @data: Payload data, if any
86 *
87 * This event is sent when the stack receives a response to an outgoing request
88 * sent by %FW_CDEV_IOC_SEND_REQUEST ioctl. The payload data for responses
89 * carrying data (read and lock responses) follows immediately and can be
90 * accessed through the @data field.
91 */
93 __u64 closure;
94 __u32 type;
95 __u32 rcode;
96 __u32 length;
98 };
100 /**
101 * struct fw_cdev_event_request - Sent on incoming request to an address region
102 * @closure: See &fw_cdev_event_common; set by %FW_CDEV_IOC_ALLOCATE ioctl
103 * @type: See &fw_cdev_event_common; always %FW_CDEV_EVENT_REQUEST
104 * @tcode: Transaction code of the incoming request
105 * @offset: The offset into the 48-bit per-node address space
106 * @handle: Reference to the kernel-side pending request
107 * @length: Data length, i.e. the request's payload size in bytes
108 * @data: Incoming data, if any
109 *
110 * This event is sent when the stack receives an incoming request to an address
111 * region registered using the %FW_CDEV_IOC_ALLOCATE ioctl. The request is
112 * guaranteed to be completely contained in the specified region. Userspace is
113 * responsible for sending the response by %FW_CDEV_IOC_SEND_RESPONSE ioctl,
114 * using the same @handle.
115 *
116 * The payload data for requests carrying data (write and lock requests)
117 * follows immediately and can be accessed through the @data field.
118 */
120 __u64 closure;
121 __u32 type;
122 __u32 tcode;
123 __u64 offset;
124 __u32 handle;
125 __u32 length;
127 };
129 /**
130 * struct fw_cdev_event_iso_interrupt - Sent when an iso packet was completed
131 * @closure: See &fw_cdev_event_common;
132 * set by %FW_CDEV_CREATE_ISO_CONTEXT ioctl
133 * @type: See &fw_cdev_event_common; always %FW_CDEV_EVENT_ISO_INTERRUPT
134 * @cycle: Cycle counter of the interrupt packet
135 * @header_length: Total length of following headers, in bytes
136 * @header: Stripped headers, if any
137 *
138 * This event is sent when the controller has completed an &fw_cdev_iso_packet
139 * with the %FW_CDEV_ISO_INTERRUPT bit set. In the receive case, the headers
140 * stripped of all packets up until and including the interrupt packet are
141 * returned in the @header field. The amount of header data per packet is as
142 * specified at iso context creation by &fw_cdev_create_iso_context.header_size.
143 *
144 * In version 1 of this ABI, header data consisted of the 1394 isochronous
145 * packet header, followed by quadlets from the packet payload if
146 * &fw_cdev_create_iso_context.header_size > 4.
147 *
148 * In version 2 of this ABI, header data consist of the 1394 isochronous
149 * packet header, followed by a timestamp quadlet if
150 * &fw_cdev_create_iso_context.header_size > 4, followed by quadlets from the
151 * packet payload if &fw_cdev_create_iso_context.header_size > 8.
152 *
153 * Behaviour of ver. 1 of this ABI is no longer available since ABI ver. 2.
154 *
155 * Format of 1394 iso packet header: 16 bits len, 2 bits tag, 6 bits channel,
156 * 4 bits tcode, 4 bits sy, in big endian byte order. Format of timestamp:
157 * 16 bits invalid, 3 bits cycleSeconds, 13 bits cycleCount, in big endian byte
158 * order.
159 */
161 __u64 closure;
162 __u32 type;
163 __u32 cycle;
164 __u32 header_length;
166 };
168 /**
169 * struct fw_cdev_event_iso_resource - Iso resources were allocated or freed
170 * @closure: See &fw_cdev_event_common;
171 * set by %FW_CDEV_IOC_(DE)ALLOCATE_ISO_RESOURCE(_ONCE) ioctl
172 * @type: %FW_CDEV_EVENT_ISO_RESOURCE_ALLOCATED or
173 * %FW_CDEV_EVENT_ISO_RESOURCE_DEALLOCATED
174 * @handle: Reference by which an allocated resource can be deallocated
175 * @channel: Isochronous channel which was (de)allocated, if any
176 * @bandwidth: Bandwidth allocation units which were (de)allocated, if any
177 *
178 * An %FW_CDEV_EVENT_ISO_RESOURCE_ALLOCATED event is sent after an isochronous
179 * resource was allocated at the IRM. The client has to check @channel and
180 * @bandwidth for whether the allocation actually succeeded.
181 *
182 * An %FW_CDEV_EVENT_ISO_RESOURCE_DEALLOCATED event is sent after an isochronous
183 * resource was deallocated at the IRM. It is also sent when automatic
184 * reallocation after a bus reset failed.
185 *
186 * @channel is <0 if no channel was (de)allocated or if reallocation failed.
187 * @bandwidth is 0 if no bandwidth was (de)allocated or if reallocation failed.
188 */
190 __u64 closure;
191 __u32 type;
192 __u32 handle;
193 __s32 channel;
194 __s32 bandwidth;
195 };
197 /**
198 * union fw_cdev_event - Convenience union of fw_cdev_event_ types
199 * @common: Valid for all types
200 * @bus_reset: Valid if @common.type == %FW_CDEV_EVENT_BUS_RESET
201 * @response: Valid if @common.type == %FW_CDEV_EVENT_RESPONSE
202 * @request: Valid if @common.type == %FW_CDEV_EVENT_REQUEST
203 * @iso_interrupt: Valid if @common.type == %FW_CDEV_EVENT_ISO_INTERRUPT
204 * @iso_resource: Valid if @common.type ==
205 * %FW_CDEV_EVENT_ISO_RESOURCE_ALLOCATED or
206 * %FW_CDEV_EVENT_ISO_RESOURCE_DEALLOCATED
207 *
208 * Convenience union for userspace use. Events could be read(2) into an
209 * appropriately aligned char buffer and then cast to this union for further
210 * processing. Note that for a request, response or iso_interrupt event,
211 * the data[] or header[] may make the size of the full event larger than
212 * sizeof(union fw_cdev_event). Also note that if you attempt to read(2)
213 * an event into a buffer that is not large enough for it, the data that does
214 * not fit will be discarded so that the next read(2) will return a new event.
215 */
223 };
225 /* available since kernel version 2.6.22 */
239 /* available since kernel version 2.6.24 */
242 /* available since kernel version 2.6.30 */
243 #define FW_CDEV_IOC_ALLOCATE_ISO_RESOURCE _IOWR('#', 0x0d, struct fw_cdev_allocate_iso_resource)
245 #define FW_CDEV_IOC_ALLOCATE_ISO_RESOURCE_ONCE _IOW('#', 0x0f, struct fw_cdev_allocate_iso_resource)
246 #define FW_CDEV_IOC_DEALLOCATE_ISO_RESOURCE_ONCE _IOW('#', 0x10, struct fw_cdev_allocate_iso_resource)
251 /*
252 * FW_CDEV_VERSION History
253 * 1 (2.6.22) - initial version
254 * 2 (2.6.30) - changed &fw_cdev_event_iso_interrupt.header if
255 * &fw_cdev_create_iso_context.header_size is 8 or more
256 */
257 #define FW_CDEV_VERSION 2
259 /**
260 * struct fw_cdev_get_info - General purpose information ioctl
261 * @version: The version field is just a running serial number.
262 * We never break backwards compatibility, but may add more
263 * structs and ioctls in later revisions.
264 * @rom_length: If @rom is non-zero, at most rom_length bytes of configuration
265 * ROM will be copied into that user space address. In either
266 * case, @rom_length is updated with the actual length of the
267 * configuration ROM.
268 * @rom: If non-zero, address of a buffer to be filled by a copy of the
269 * device's configuration ROM
270 * @bus_reset: If non-zero, address of a buffer to be filled by a
271 * &struct fw_cdev_event_bus_reset with the current state
272 * of the bus. This does not cause a bus reset to happen.
273 * @bus_reset_closure: Value of &closure in this and subsequent bus reset events
274 * @card: The index of the card this device belongs to
275 */
277 __u32 version;
278 __u32 rom_length;
279 __u64 rom;
280 __u64 bus_reset;
281 __u64 bus_reset_closure;
282 __u32 card;
283 };
285 /**
286 * struct fw_cdev_send_request - Send an asynchronous request packet
287 * @tcode: Transaction code of the request
288 * @length: Length of outgoing payload, in bytes
289 * @offset: 48-bit offset at destination node
290 * @closure: Passed back to userspace in the response event
291 * @data: Userspace pointer to payload
292 * @generation: The bus generation where packet is valid
293 *
294 * Send a request to the device. This ioctl implements all outgoing requests.
295 * Both quadlet and block request specify the payload as a pointer to the data
296 * in the @data field. Once the transaction completes, the kernel writes an
297 * &fw_cdev_event_response event back. The @closure field is passed back to
298 * user space in the response event.
299 */
301 __u32 tcode;
302 __u32 length;
303 __u64 offset;
304 __u64 closure;
305 __u64 data;
306 __u32 generation;
307 };
309 /**
310 * struct fw_cdev_send_response - Send an asynchronous response packet
311 * @rcode: Response code as determined by the userspace handler
312 * @length: Length of outgoing payload, in bytes
313 * @data: Userspace pointer to payload
314 * @handle: The handle from the &fw_cdev_event_request
315 *
316 * Send a response to an incoming request. By setting up an address range using
317 * the %FW_CDEV_IOC_ALLOCATE ioctl, userspace can listen for incoming requests. An
318 * incoming request will generate an %FW_CDEV_EVENT_REQUEST, and userspace must
319 * send a reply using this ioctl. The event has a handle to the kernel-side
320 * pending transaction, which should be used with this ioctl.
321 */
323 __u32 rcode;
324 __u32 length;
325 __u64 data;
326 __u32 handle;
327 };
329 /**
330 * struct fw_cdev_allocate - Allocate a CSR address range
331 * @offset: Start offset of the address range
332 * @closure: To be passed back to userspace in request events
333 * @length: Length of the address range, in bytes
334 * @handle: Handle to the allocation, written by the kernel
335 *
336 * Allocate an address range in the 48-bit address space on the local node
337 * (the controller). This allows userspace to listen for requests with an
338 * offset within that address range. When the kernel receives a request
339 * within the range, an &fw_cdev_event_request event will be written back.
340 * The @closure field is passed back to userspace in the response event.
341 * The @handle field is an out parameter, returning a handle to the allocated
342 * range to be used for later deallocation of the range.
343 *
344 * The address range is allocated on all local nodes. The address allocation
345 * is exclusive except for the FCP command and response registers.
346 */
348 __u64 offset;
349 __u64 closure;
350 __u32 length;
351 __u32 handle;
352 };
354 /**
355 * struct fw_cdev_deallocate - Free a CSR address range or isochronous resource
356 * @handle: Handle to the address range or iso resource, as returned by the
357 * kernel when the range or resource was allocated
358 */
360 __u32 handle;
361 };
363 #define FW_CDEV_LONG_RESET 0
364 #define FW_CDEV_SHORT_RESET 1
366 /**
367 * struct fw_cdev_initiate_bus_reset - Initiate a bus reset
368 * @type: %FW_CDEV_SHORT_RESET or %FW_CDEV_LONG_RESET
369 *
370 * Initiate a bus reset for the bus this device is on. The bus reset can be
371 * either the original (long) bus reset or the arbitrated (short) bus reset
372 * introduced in 1394a-2000.
373 */
376 };
378 /**
379 * struct fw_cdev_add_descriptor - Add contents to the local node's config ROM
380 * @immediate: If non-zero, immediate key to insert before pointer
381 * @key: Upper 8 bits of root directory pointer
382 * @data: Userspace pointer to contents of descriptor block
383 * @length: Length of descriptor block data, in bytes
384 * @handle: Handle to the descriptor, written by the kernel
385 *
386 * Add a descriptor block and optionally a preceding immediate key to the local
387 * node's configuration ROM.
388 *
389 * The @key field specifies the upper 8 bits of the descriptor root directory
390 * pointer and the @data and @length fields specify the contents. The @key
391 * should be of the form 0xXX000000. The offset part of the root directory entry
392 * will be filled in by the kernel.
393 *
394 * If not 0, the @immediate field specifies an immediate key which will be
395 * inserted before the root directory pointer.
396 *
397 * If successful, the kernel adds the descriptor and writes back a handle to the
398 * kernel-side object to be used for later removal of the descriptor block and
399 * immediate key.
400 *
401 * This ioctl affects the configuration ROMs of all local nodes.
402 * The ioctl only succeeds on device files which represent a local node.
403 */
405 __u32 immediate;
406 __u32 key;
407 __u64 data;
408 __u32 length;
409 __u32 handle;
410 };
412 /**
413 * struct fw_cdev_remove_descriptor - Remove contents from the configuration ROM
414 * @handle: Handle to the descriptor, as returned by the kernel when the
415 * descriptor was added
416 *
417 * Remove a descriptor block and accompanying immediate key from the local
418 * nodes' configuration ROMs.
419 */
421 __u32 handle;
422 };
424 #define FW_CDEV_ISO_CONTEXT_TRANSMIT 0
425 #define FW_CDEV_ISO_CONTEXT_RECEIVE 1
427 /**
428 * struct fw_cdev_create_iso_context - Create a context for isochronous IO
429 * @type: %FW_CDEV_ISO_CONTEXT_TRANSMIT or %FW_CDEV_ISO_CONTEXT_RECEIVE
430 * @header_size: Header size to strip for receive contexts
431 * @channel: Channel to bind to
432 * @speed: Speed to transmit at
433 * @closure: To be returned in &fw_cdev_event_iso_interrupt
434 * @handle: Handle to context, written back by kernel
435 *
436 * Prior to sending or receiving isochronous I/O, a context must be created.
437 * The context records information about the transmit or receive configuration
438 * and typically maps to an underlying hardware resource. A context is set up
439 * for either sending or receiving. It is bound to a specific isochronous
440 * channel.
441 *
442 * If a context was successfully created, the kernel writes back a handle to the
443 * context, which must be passed in for subsequent operations on that context.
444 *
445 * Note that the effect of a @header_size > 4 depends on
446 * &fw_cdev_get_info.version, as documented at &fw_cdev_event_iso_interrupt.
447 */
449 __u32 type;
450 __u32 header_size;
451 __u32 channel;
452 __u32 speed;
453 __u64 closure;
454 __u32 handle;
455 };
457 #define FW_CDEV_ISO_PAYLOAD_LENGTH(v) (v)
458 #define FW_CDEV_ISO_INTERRUPT (1 << 16)
459 #define FW_CDEV_ISO_SKIP (1 << 17)
460 #define FW_CDEV_ISO_SYNC (1 << 17)
461 #define FW_CDEV_ISO_TAG(v) ((v) << 18)
462 #define FW_CDEV_ISO_SY(v) ((v) << 20)
463 #define FW_CDEV_ISO_HEADER_LENGTH(v) ((v) << 24)
465 /**
466 * struct fw_cdev_iso_packet - Isochronous packet
467 * @control: Contains the header length (8 uppermost bits), the sy field
468 * (4 bits), the tag field (2 bits), a sync flag (1 bit),
469 * a skip flag (1 bit), an interrupt flag (1 bit), and the
470 * payload length (16 lowermost bits)
471 * @header: Header and payload
472 *
473 * &struct fw_cdev_iso_packet is used to describe isochronous packet queues.
474 *
475 * Use the FW_CDEV_ISO_ macros to fill in @control. The sy and tag fields are
476 * specified by IEEE 1394a and IEC 61883.
477 *
478 * FIXME - finish this documentation
479 */
481 __u32 control;
483 };
485 /**
486 * struct fw_cdev_queue_iso - Queue isochronous packets for I/O
487 * @packets: Userspace pointer to packet data
488 * @data: Pointer into mmap()'ed payload buffer
489 * @size: Size of packet data in bytes
490 * @handle: Isochronous context handle
491 *
492 * Queue a number of isochronous packets for reception or transmission.
493 * This ioctl takes a pointer to an array of &fw_cdev_iso_packet structs,
494 * which describe how to transmit from or receive into a contiguous region
495 * of a mmap()'ed payload buffer. As part of the packet descriptors,
496 * a series of headers can be supplied, which will be prepended to the
497 * payload during DMA.
498 *
499 * The kernel may or may not queue all packets, but will write back updated
500 * values of the @packets, @data and @size fields, so the ioctl can be
501 * resubmitted easily.
502 */
504 __u64 packets;
505 __u64 data;
506 __u32 size;
507 __u32 handle;
508 };
510 #define FW_CDEV_ISO_CONTEXT_MATCH_TAG0 1
511 #define FW_CDEV_ISO_CONTEXT_MATCH_TAG1 2
512 #define FW_CDEV_ISO_CONTEXT_MATCH_TAG2 4
513 #define FW_CDEV_ISO_CONTEXT_MATCH_TAG3 8
514 #define FW_CDEV_ISO_CONTEXT_MATCH_ALL_TAGS 15
516 /**
517 * struct fw_cdev_start_iso - Start an isochronous transmission or reception
518 * @cycle: Cycle in which to start I/O. If @cycle is greater than or
519 * equal to 0, the I/O will start on that cycle.
520 * @sync: Determines the value to wait for for receive packets that have
521 * the %FW_CDEV_ISO_SYNC bit set
522 * @tags: Tag filter bit mask. Only valid for isochronous reception.
523 * Determines the tag values for which packets will be accepted.
524 * Use FW_CDEV_ISO_CONTEXT_MATCH_ macros to set @tags.
525 * @handle: Isochronous context handle within which to transmit or receive
526 */
528 __s32 cycle;
529 __u32 sync;
530 __u32 tags;
531 __u32 handle;
532 };
534 /**
535 * struct fw_cdev_stop_iso - Stop an isochronous transmission or reception
536 * @handle: Handle of isochronous context to stop
537 */
539 __u32 handle;
540 };
542 /**
543 * struct fw_cdev_get_cycle_timer - read cycle timer register
544 * @local_time: system time, in microseconds since the Epoch
545 * @cycle_timer: isochronous cycle timer, as per OHCI 1.1 clause 5.13
546 *
547 * The %FW_CDEV_IOC_GET_CYCLE_TIMER ioctl reads the isochronous cycle timer
548 * and also the system clock. This allows to express the receive time of an
549 * isochronous packet as a system time with microsecond accuracy.
550 *
551 * @cycle_timer consists of 7 bits cycleSeconds, 13 bits cycleCount, and
552 * 12 bits cycleOffset, in host byte order.
553 */
555 __u64 local_time;
556 __u32 cycle_timer;
557 };
559 /**
560 * struct fw_cdev_allocate_iso_resource - (De)allocate a channel or bandwidth
561 * @closure: Passed back to userspace in correponding iso resource events
562 * @channels: Isochronous channels of which one is to be (de)allocated
563 * @bandwidth: Isochronous bandwidth units to be (de)allocated
564 * @handle: Handle to the allocation, written by the kernel (only valid in
565 * case of %FW_CDEV_IOC_ALLOCATE_ISO_RESOURCE ioctls)
566 *
567 * The %FW_CDEV_IOC_ALLOCATE_ISO_RESOURCE ioctl initiates allocation of an
568 * isochronous channel and/or of isochronous bandwidth at the isochronous
569 * resource manager (IRM). Only one of the channels specified in @channels is
570 * allocated. An %FW_CDEV_EVENT_ISO_RESOURCE_ALLOCATED is sent after
571 * communication with the IRM, indicating success or failure in the event data.
572 * The kernel will automatically reallocate the resources after bus resets.
573 * Should a reallocation fail, an %FW_CDEV_EVENT_ISO_RESOURCE_DEALLOCATED event
574 * will be sent. The kernel will also automatically deallocate the resources
575 * when the file descriptor is closed.
576 *
577 * The %FW_CDEV_IOC_DEALLOCATE_ISO_RESOURCE ioctl can be used to initiate
578 * deallocation of resources which were allocated as described above.
579 * An %FW_CDEV_EVENT_ISO_RESOURCE_DEALLOCATED event concludes this operation.
580 *
581 * The %FW_CDEV_IOC_ALLOCATE_ISO_RESOURCE_ONCE ioctl is a variant of allocation
582 * without automatic re- or deallocation.
583 * An %FW_CDEV_EVENT_ISO_RESOURCE_ALLOCATED event concludes this operation,
584 * indicating success or failure in its data.
585 *
586 * The %FW_CDEV_IOC_DEALLOCATE_ISO_RESOURCE_ONCE ioctl works like
587 * %FW_CDEV_IOC_ALLOCATE_ISO_RESOURCE_ONCE except that resources are freed
588 * instead of allocated.
589 * An %FW_CDEV_EVENT_ISO_RESOURCE_DEALLOCATED event concludes this operation.
590 *
591 * To summarize, %FW_CDEV_IOC_DEALLOCATE_ISO_RESOURCE allocates iso resources
592 * for the lifetime of the fd or handle.
593 * In contrast, %FW_CDEV_IOC_ALLOCATE_ISO_RESOURCE_ONCE allocates iso resources
594 * for the duration of a bus generation.
595 *
596 * @channels is a host-endian bitfield with the least significant bit
597 * representing channel 0 and the most significant bit representing channel 63:
598 * 1ULL << c for each channel c that is a candidate for (de)allocation.
599 *
600 * @bandwidth is expressed in bandwidth allocation units, i.e. the time to send
601 * one quadlet of data (payload or header data) at speed S1600.
602 */
604 __u64 closure;
605 __u64 channels;
606 __u32 bandwidth;
607 __u32 handle;
608 };
610 /**
611 * struct fw_cdev_send_stream_packet - send an asynchronous stream packet
612 * @length: Length of outgoing payload, in bytes
613 * @tag: Data format tag
614 * @channel: Isochronous channel to transmit to
615 * @sy: Synchronization code
616 * @closure: Passed back to userspace in the response event
617 * @data: Userspace pointer to payload
618 * @generation: The bus generation where packet is valid
619 * @speed: Speed to transmit at
620 *
621 * The %FW_CDEV_IOC_SEND_STREAM_PACKET ioctl sends an asynchronous stream packet
622 * to every device which is listening to the specified channel. The kernel
623 * writes an &fw_cdev_event_response event which indicates success or failure of
624 * the transmission.
625 */
627 __u32 length;
628 __u32 tag;
629 __u32 channel;
630 __u32 sy;
631 __u64 closure;
632 __u64 data;
633 __u32 generation;
634 __u32 speed;
635 };