2 * INET An implementation of the TCP/IP protocol suite for the LINUX
3 * operating system. INET is implemented using the BSD Socket
4 * interface as the means of communication with the user level.
6 * HIPPI-type device handling.
8 * Version: @(#)hippi.c 1.0.0 05/29/97
11 * Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG>
12 * Mark Evans, <evansmp@uhura.aston.ac.uk>
13 * Florian La Roche, <rzsfl@rz.uni-sb.de>
14 * Alan Cox, <gw4pts@gw4pts.ampr.org>
15 * Jes Sorensen, <Jes.Sorensen@cern.ch>
17 * This program is free software; you can redistribute it and/or
18 * modify it under the terms of the GNU General Public License
19 * as published by the Free Software Foundation; either version
20 * 2 of the License, or (at your option) any later version.
23 #include <linux/module.h>
24 #include <linux/types.h>
25 #include <linux/kernel.h>
26 #include <linux/string.h>
28 #include <linux/socket.h>
30 #include <linux/inet.h>
31 #include <linux/netdevice.h>
32 #include <linux/hippidevice.h>
33 #include <linux/skbuff.h>
34 #include <linux/errno.h>
37 #include <asm/uaccess.h>
38 #include <asm/system.h>
41 * Create the HIPPI MAC header for an arbitrary protocol layer
43 * saddr=NULL means use device source address
44 * daddr=NULL means leave destination address (eg unresolved arp)
47 static int hippi_header(struct sk_buff
*skb
, struct net_device
*dev
,
49 const void *daddr
, const void *saddr
, unsigned len
)
51 struct hippi_hdr
*hip
= (struct hippi_hdr
*)skb_push(skb
, HIPPI_HLEN
);
52 struct hippi_cb
*hcb
= (struct hippi_cb
*) skb
->cb
;
55 len
= skb
->len
- HIPPI_HLEN
;
56 printk("hippi_header(): length not supplied\n");
60 * Due to the stupidity of the little endian byte-order we
61 * have to set the fp field this way.
63 hip
->fp
.fixed
= htonl(0x04800018);
64 hip
->fp
.d2_size
= htonl(len
+ 8);
66 hip
->le
.double_wide
= 0; /* only HIPPI 800 for the time being */
67 hip
->le
.message_type
= 0; /* Data PDU */
69 hip
->le
.dest_addr_type
= 2; /* 12 bit SC address */
70 hip
->le
.src_addr_type
= 2; /* 12 bit SC address */
72 memcpy(hip
->le
.src_switch_addr
, dev
->dev_addr
+ 3, 3);
73 memset(&hip
->le
.reserved
, 0, 16);
75 hip
->snap
.dsap
= HIPPI_EXTENDED_SAP
;
76 hip
->snap
.ssap
= HIPPI_EXTENDED_SAP
;
77 hip
->snap
.ctrl
= HIPPI_UI_CMD
;
78 hip
->snap
.oui
[0] = 0x00;
79 hip
->snap
.oui
[1] = 0x00;
80 hip
->snap
.oui
[2] = 0x00;
81 hip
->snap
.ethertype
= htons(type
);
85 memcpy(hip
->le
.dest_switch_addr
, daddr
+ 3, 3);
86 memcpy(&hcb
->ifield
, daddr
+ 2, 4);
90 return -((int)HIPPI_HLEN
);
95 * Rebuild the HIPPI MAC header. This is called after an ARP has
96 * completed on this sk_buff. We now let ARP fill in the other fields.
99 static int hippi_rebuild_header(struct sk_buff
*skb
)
101 struct hippi_hdr
*hip
= (struct hippi_hdr
*)skb
->data
;
104 * Only IP is currently supported
107 if(hip
->snap
.ethertype
!= htons(ETH_P_IP
))
109 printk(KERN_DEBUG
"%s: unable to resolve type %X addresses.\n",skb
->dev
->name
,ntohs(hip
->snap
.ethertype
));
114 * We don't support dynamic ARP on HIPPI, but we use the ARP
115 * static ARP tables to hold the I-FIELDs.
117 return arp_find(hip
->le
.daddr
, skb
);
122 * Determine the packet's protocol ID.
125 __be16
hippi_type_trans(struct sk_buff
*skb
, struct net_device
*dev
)
127 struct hippi_hdr
*hip
;
130 * This is actually wrong ... question is if we really should
131 * set the raw address here.
134 skb_reset_mac_header(skb
);
135 hip
= (struct hippi_hdr
*)skb_mac_header(skb
);
136 skb_pull(skb
, HIPPI_HLEN
);
139 * No fancy promisc stuff here now.
142 return hip
->snap
.ethertype
;
145 EXPORT_SYMBOL(hippi_type_trans
);
147 int hippi_change_mtu(struct net_device
*dev
, int new_mtu
)
150 * HIPPI's got these nice large MTUs.
152 if ((new_mtu
< 68) || (new_mtu
> 65280))
157 EXPORT_SYMBOL(hippi_change_mtu
);
160 * For HIPPI we will actually use the lower 4 bytes of the hardware
161 * address as the I-FIELD rather than the actual hardware address.
163 int hippi_mac_addr(struct net_device
*dev
, void *p
)
165 struct sockaddr
*addr
= p
;
166 if (netif_running(dev
))
168 memcpy(dev
->dev_addr
, addr
->sa_data
, dev
->addr_len
);
171 EXPORT_SYMBOL(hippi_mac_addr
);
173 int hippi_neigh_setup_dev(struct net_device
*dev
, struct neigh_parms
*p
)
175 /* Never send broadcast/multicast ARP messages */
178 /* In IPv6 unicast probes are valid even on NBMA,
179 * because they are encapsulated in normal IPv6 protocol.
180 * Should be a generic flag.
182 if (p
->tbl
->family
!= AF_INET6
)
186 EXPORT_SYMBOL(hippi_neigh_setup_dev
);
188 static const struct header_ops hippi_header_ops
= {
189 .create
= hippi_header
,
190 .rebuild
= hippi_rebuild_header
,
194 static void hippi_setup(struct net_device
*dev
)
196 dev
->header_ops
= &hippi_header_ops
;
199 * We don't support HIPPI `ARP' for the time being, and probably
200 * never will unless someone else implements it. However we
201 * still need a fake ARPHRD to make ifconfig and friends play ball.
203 dev
->type
= ARPHRD_HIPPI
;
204 dev
->hard_header_len
= HIPPI_HLEN
;
206 dev
->addr_len
= HIPPI_ALEN
;
207 dev
->tx_queue_len
= 25 /* 5 */;
208 memset(dev
->broadcast
, 0xFF, HIPPI_ALEN
);
212 * HIPPI doesn't support broadcast+multicast and we only use
213 * static ARP tables. ARP is disabled by hippi_neigh_setup_dev.
219 * alloc_hippi_dev - Register HIPPI device
220 * @sizeof_priv: Size of additional driver-private structure to be allocated
221 * for this HIPPI device
223 * Fill in the fields of the device structure with HIPPI-generic values.
225 * Constructs a new net device, complete with a private data area of
226 * size @sizeof_priv. A 32-byte (not bit) alignment is enforced for
227 * this private data area.
230 struct net_device
*alloc_hippi_dev(int sizeof_priv
)
232 return alloc_netdev(sizeof_priv
, "hip%d", hippi_setup
);
235 EXPORT_SYMBOL(alloc_hippi_dev
);