?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
sysfs: sysfs_sd_setattr set iattrs unconditionally
[linux-2.6/linux-2.6-openrd.git] / drivers / serial / pxa.c
blob56ee082157aaf121c755fd3a42ef4005e9667f14
1 /*
2 * linux/drivers/serial/pxa.c
3 *
4 * Based on drivers/serial/8250.c by Russell King.
5 *
6 * Author: Nicolas Pitre
7 * Created: Feb 20, 2003
8 * Copyright: (C) 2003 Monta Vista Software, Inc.
9 *
10 * This program is free software; you can redistribute it and/or modify
11 * it under the terms of the GNU General Public License as published by
12 * the Free Software Foundation; either version 2 of the License, or
13 * (at your option) any later version.
14 *
15 * Note 1: This driver is made separate from the already too overloaded
16 * 8250.c because it needs some kirks of its own and that'll make it
17 * easier to add DMA support.
18 *
19 * Note 2: I'm too sick of device allocation policies for serial ports.
20 * If someone else wants to request an "official" allocation of major/minor
21 * for this driver please be my guest. And don't forget that new hardware
22 * to come from Intel might have more than 3 or 4 of those UARTs. Let's
23 * hope for a better port registration and dynamic device allocation scheme
24 * with the serial core maintainer satisfaction to appear soon.
25 */
26
27
28 #if defined(CONFIG_SERIAL_PXA_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
29 #define SUPPORT_SYSRQ
30 #endif
31
32 #include <linux/module.h>
33 #include <linux/ioport.h>
34 #include <linux/init.h>
35 #include <linux/console.h>
36 #include <linux/sysrq.h>
37 #include <linux/serial_reg.h>
38 #include <linux/circ_buf.h>
39 #include <linux/delay.h>
40 #include <linux/interrupt.h>
41 #include <linux/platform_device.h>
42 #include <linux/tty.h>
43 #include <linux/tty_flip.h>
44 #include <linux/serial_core.h>
45 #include <linux/clk.h>
46 #include <linux/io.h>
47
48 struct uart_pxa_port {
49 struct uart_port port;
50 unsigned char ier;
51 unsigned char lcr;
52 unsigned char mcr;
53 unsigned int lsr_break_flag;
54 struct clk *clk;
55 char *name;
56 };
57
58 static inline unsigned int serial_in(struct uart_pxa_port *up, int offset)
59 {
60 offset <<= 2;
61 return readl(up->port.membase + offset);
62 }
63
64 static inline void serial_out(struct uart_pxa_port *up, int offset, int value)
65 {
66 offset <<= 2;
67 writel(value, up->port.membase + offset);
68 }
69
70 static void serial_pxa_enable_ms(struct uart_port *port)
71 {
72 struct uart_pxa_port *up = (struct uart_pxa_port *)port;
73
74 up->ier |= UART_IER_MSI;
75 serial_out(up, UART_IER, up->ier);
76 }
77
78 static void serial_pxa_stop_tx(struct uart_port *port)
79 {
80 struct uart_pxa_port *up = (struct uart_pxa_port *)port;
81
82 if (up->ier & UART_IER_THRI) {
83 up->ier &= ~UART_IER_THRI;
84 serial_out(up, UART_IER, up->ier);
85 }
86 }
87
88 static void serial_pxa_stop_rx(struct uart_port *port)
89 {
90 struct uart_pxa_port *up = (struct uart_pxa_port *)port;
91
92 up->ier &= ~UART_IER_RLSI;
93 up->port.read_status_mask &= ~UART_LSR_DR;
94 serial_out(up, UART_IER, up->ier);
95 }
96
97 static inline void receive_chars(struct uart_pxa_port *up, int *status)
98 {
99 struct tty_struct *tty = up->port.state->port.tty;
100 unsigned int ch, flag;
101 int max_count = 256;
102
103 do {
104 ch = serial_in(up, UART_RX);
105 flag = TTY_NORMAL;
106 up->port.icount.rx++;
107
108 if (unlikely(*status & (UART_LSR_BI | UART_LSR_PE |
109 UART_LSR_FE | UART_LSR_OE))) {
110 /*
111 * For statistics only
112 */
113 if (*status & UART_LSR_BI) {
114 *status &= ~(UART_LSR_FE | UART_LSR_PE);
115 up->port.icount.brk++;
116 /*
117 * We do the SysRQ and SAK checking
118 * here because otherwise the break
119 * may get masked by ignore_status_mask
120 * or read_status_mask.
121 */
122 if (uart_handle_break(&up->port))
123 goto ignore_char;
124 } else if (*status & UART_LSR_PE)
125 up->port.icount.parity++;
126 else if (*status & UART_LSR_FE)
127 up->port.icount.frame++;
128 if (*status & UART_LSR_OE)
129 up->port.icount.overrun++;
130
131 /*
132 * Mask off conditions which should be ignored.
133 */
134 *status &= up->port.read_status_mask;
135
136 #ifdef CONFIG_SERIAL_PXA_CONSOLE
137 if (up->port.line == up->port.cons->index) {
138 /* Recover the break flag from console xmit */
139 *status |= up->lsr_break_flag;
140 up->lsr_break_flag = 0;
141 }
142 #endif
143 if (*status & UART_LSR_BI) {
144 flag = TTY_BREAK;
145 } else if (*status & UART_LSR_PE)
146 flag = TTY_PARITY;
147 else if (*status & UART_LSR_FE)
148 flag = TTY_FRAME;
149 }
150
151 if (uart_handle_sysrq_char(&up->port, ch))
152 goto ignore_char;
153
154 uart_insert_char(&up->port, *status, UART_LSR_OE, ch, flag);
155
156 ignore_char:
157 *status = serial_in(up, UART_LSR);
158 } while ((*status & UART_LSR_DR) && (max_count-- > 0));
159 tty_flip_buffer_push(tty);
160 }
161
162 static void transmit_chars(struct uart_pxa_port *up)
163 {
164 struct circ_buf *xmit = &up->port.state->xmit;
165 int count;
166
167 if (up->port.x_char) {
168 serial_out(up, UART_TX, up->port.x_char);
169 up->port.icount.tx++;
170 up->port.x_char = 0;
171 return;
172 }
173 if (uart_circ_empty(xmit) || uart_tx_stopped(&up->port)) {
174 serial_pxa_stop_tx(&up->port);
175 return;
176 }
177
178 count = up->port.fifosize / 2;
179 do {
180 serial_out(up, UART_TX, xmit->buf[xmit->tail]);
181 xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
182 up->port.icount.tx++;
183 if (uart_circ_empty(xmit))
184 break;
185 } while (--count > 0);
186
187 if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
188 uart_write_wakeup(&up->port);
189
190
191 if (uart_circ_empty(xmit))
192 serial_pxa_stop_tx(&up->port);
193 }
194
195 static void serial_pxa_start_tx(struct uart_port *port)
196 {
197 struct uart_pxa_port *up = (struct uart_pxa_port *)port;
198
199 if (!(up->ier & UART_IER_THRI)) {
200 up->ier |= UART_IER_THRI;
201 serial_out(up, UART_IER, up->ier);
202 }
203 }
204
205 static inline void check_modem_status(struct uart_pxa_port *up)
206 {
207 int status;
208
209 status = serial_in(up, UART_MSR);
210
211 if ((status & UART_MSR_ANY_DELTA) == 0)
212 return;
213
214 if (status & UART_MSR_TERI)
215 up->port.icount.rng++;
216 if (status & UART_MSR_DDSR)
217 up->port.icount.dsr++;
218 if (status & UART_MSR_DDCD)
219 uart_handle_dcd_change(&up->port, status & UART_MSR_DCD);
220 if (status & UART_MSR_DCTS)
221 uart_handle_cts_change(&up->port, status & UART_MSR_CTS);
222
223 wake_up_interruptible(&up->port.state->port.delta_msr_wait);
224 }
225
226 /*
227 * This handles the interrupt from one port.
228 */
229 static inline irqreturn_t serial_pxa_irq(int irq, void *dev_id)
230 {
231 struct uart_pxa_port *up = dev_id;
232 unsigned int iir, lsr;
233
234 iir = serial_in(up, UART_IIR);
235 if (iir & UART_IIR_NO_INT)
236 return IRQ_NONE;
237 lsr = serial_in(up, UART_LSR);
238 if (lsr & UART_LSR_DR)
239 receive_chars(up, &lsr);
240 check_modem_status(up);
241 if (lsr & UART_LSR_THRE)
242 transmit_chars(up);
243 return IRQ_HANDLED;
244 }
245
246 static unsigned int serial_pxa_tx_empty(struct uart_port *port)
247 {
248 struct uart_pxa_port *up = (struct uart_pxa_port *)port;
249 unsigned long flags;
250 unsigned int ret;
251
252 spin_lock_irqsave(&up->port.lock, flags);
253 ret = serial_in(up, UART_LSR) & UART_LSR_TEMT ? TIOCSER_TEMT : 0;
254 spin_unlock_irqrestore(&up->port.lock, flags);
255
256 return ret;
257 }
258
259 static unsigned int serial_pxa_get_mctrl(struct uart_port *port)
260 {
261 struct uart_pxa_port *up = (struct uart_pxa_port *)port;
262 unsigned char status;
263 unsigned int ret;
264
265 status = serial_in(up, UART_MSR);
266
267 ret = 0;
268 if (status & UART_MSR_DCD)
269 ret |= TIOCM_CAR;
270 if (status & UART_MSR_RI)
271 ret |= TIOCM_RNG;
272 if (status & UART_MSR_DSR)
273 ret |= TIOCM_DSR;
274 if (status & UART_MSR_CTS)
275 ret |= TIOCM_CTS;
276 return ret;
277 }
278
279 static void serial_pxa_set_mctrl(struct uart_port *port, unsigned int mctrl)
280 {
281 struct uart_pxa_port *up = (struct uart_pxa_port *)port;
282 unsigned char mcr = 0;
283
284 if (mctrl & TIOCM_RTS)
285 mcr |= UART_MCR_RTS;
286 if (mctrl & TIOCM_DTR)
287 mcr |= UART_MCR_DTR;
288 if (mctrl & TIOCM_OUT1)
289 mcr |= UART_MCR_OUT1;
290 if (mctrl & TIOCM_OUT2)
291 mcr |= UART_MCR_OUT2;
292 if (mctrl & TIOCM_LOOP)
293 mcr |= UART_MCR_LOOP;
294
295 mcr |= up->mcr;
296
297 serial_out(up, UART_MCR, mcr);
298 }
299
300 static void serial_pxa_break_ctl(struct uart_port *port, int break_state)
301 {
302 struct uart_pxa_port *up = (struct uart_pxa_port *)port;
303 unsigned long flags;
304
305 spin_lock_irqsave(&up->port.lock, flags);
306 if (break_state == -1)
307 up->lcr |= UART_LCR_SBC;
308 else
309 up->lcr &= ~UART_LCR_SBC;
310 serial_out(up, UART_LCR, up->lcr);
311 spin_unlock_irqrestore(&up->port.lock, flags);
312 }
313
314 #if 0
315 static void serial_pxa_dma_init(struct pxa_uart *up)
316 {
317 up->rxdma =
318 pxa_request_dma(up->name, DMA_PRIO_LOW, pxa_receive_dma, up);
319 if (up->rxdma < 0)
320 goto out;
321 up->txdma =
322 pxa_request_dma(up->name, DMA_PRIO_LOW, pxa_transmit_dma, up);
323 if (up->txdma < 0)
324 goto err_txdma;
325 up->dmadesc = kmalloc(4 * sizeof(pxa_dma_desc), GFP_KERNEL);
326 if (!up->dmadesc)
327 goto err_alloc;
328
329 /* ... */
330 err_alloc:
331 pxa_free_dma(up->txdma);
332 err_rxdma:
333 pxa_free_dma(up->rxdma);
334 out:
335 return;
336 }
337 #endif
338
339 static int serial_pxa_startup(struct uart_port *port)
340 {
341 struct uart_pxa_port *up = (struct uart_pxa_port *)port;
342 unsigned long flags;
343 int retval;
344
345 if (port->line == 3) /* HWUART */
346 up->mcr |= UART_MCR_AFE;
347 else
348 up->mcr = 0;
349
350 up->port.uartclk = clk_get_rate(up->clk);
351
352 /*
353 * Allocate the IRQ
354 */
355 retval = request_irq(up->port.irq, serial_pxa_irq, 0, up->name, up);
356 if (retval)
357 return retval;
358
359 /*
360 * Clear the FIFO buffers and disable them.
361 * (they will be reenabled in set_termios())
362 */
363 serial_out(up, UART_FCR, UART_FCR_ENABLE_FIFO);
364 serial_out(up, UART_FCR, UART_FCR_ENABLE_FIFO |
365 UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT);
366 serial_out(up, UART_FCR, 0);
367
368 /*
369 * Clear the interrupt registers.
370 */
371 (void) serial_in(up, UART_LSR);
372 (void) serial_in(up, UART_RX);
373 (void) serial_in(up, UART_IIR);
374 (void) serial_in(up, UART_MSR);
375
376 /*
377 * Now, initialize the UART
378 */
379 serial_out(up, UART_LCR, UART_LCR_WLEN8);
380
381 spin_lock_irqsave(&up->port.lock, flags);
382 up->port.mctrl |= TIOCM_OUT2;
383 serial_pxa_set_mctrl(&up->port, up->port.mctrl);
384 spin_unlock_irqrestore(&up->port.lock, flags);
385
386 /*
387 * Finally, enable interrupts. Note: Modem status interrupts
388 * are set via set_termios(), which will be occurring imminently
389 * anyway, so we don't enable them here.
390 */
391 up->ier = UART_IER_RLSI | UART_IER_RDI | UART_IER_RTOIE | UART_IER_UUE;
392 serial_out(up, UART_IER, up->ier);
393
394 /*
395 * And clear the interrupt registers again for luck.
396 */
397 (void) serial_in(up, UART_LSR);
398 (void) serial_in(up, UART_RX);
399 (void) serial_in(up, UART_IIR);
400 (void) serial_in(up, UART_MSR);
401
402 return 0;
403 }
404
405 static void serial_pxa_shutdown(struct uart_port *port)
406 {
407 struct uart_pxa_port *up = (struct uart_pxa_port *)port;
408 unsigned long flags;
409
410 free_irq(up->port.irq, up);
411
412 /*
413 * Disable interrupts from this port
414 */
415 up->ier = 0;
416 serial_out(up, UART_IER, 0);
417
418 spin_lock_irqsave(&up->port.lock, flags);
419 up->port.mctrl &= ~TIOCM_OUT2;
420 serial_pxa_set_mctrl(&up->port, up->port.mctrl);
421 spin_unlock_irqrestore(&up->port.lock, flags);
422
423 /*
424 * Disable break condition and FIFOs
425 */
426 serial_out(up, UART_LCR, serial_in(up, UART_LCR) & ~UART_LCR_SBC);
427 serial_out(up, UART_FCR, UART_FCR_ENABLE_FIFO |
428 UART_FCR_CLEAR_RCVR |
429 UART_FCR_CLEAR_XMIT);
430 serial_out(up, UART_FCR, 0);
431 }
432
433 static void
434 serial_pxa_set_termios(struct uart_port *port, struct ktermios *termios,
435 struct ktermios *old)
436 {
437 struct uart_pxa_port *up = (struct uart_pxa_port *)port;
438 unsigned char cval, fcr = 0;
439 unsigned long flags;
440 unsigned int baud, quot;
441 unsigned int dll;
442
443 switch (termios->c_cflag & CSIZE) {
444 case CS5:
445 cval = UART_LCR_WLEN5;
446 break;
447 case CS6:
448 cval = UART_LCR_WLEN6;
449 break;
450 case CS7:
451 cval = UART_LCR_WLEN7;
452 break;
453 default:
454 case CS8:
455 cval = UART_LCR_WLEN8;
456 break;
457 }
458
459 if (termios->c_cflag & CSTOPB)
460 cval |= UART_LCR_STOP;
461 if (termios->c_cflag & PARENB)
462 cval |= UART_LCR_PARITY;
463 if (!(termios->c_cflag & PARODD))
464 cval |= UART_LCR_EPAR;
465
466 /*
467 * Ask the core to calculate the divisor for us.
468 */
469 baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16);
470 quot = uart_get_divisor(port, baud);
471
472 if ((up->port.uartclk / quot) < (2400 * 16))
473 fcr = UART_FCR_ENABLE_FIFO | UART_FCR_PXAR1;
474 else if ((up->port.uartclk / quot) < (230400 * 16))
475 fcr = UART_FCR_ENABLE_FIFO | UART_FCR_PXAR8;
476 else
477 fcr = UART_FCR_ENABLE_FIFO | UART_FCR_PXAR32;
478
479 /*
480 * Ok, we're now changing the port state. Do it with
481 * interrupts disabled.
482 */
483 spin_lock_irqsave(&up->port.lock, flags);
484
485 /*
486 * Ensure the port will be enabled.
487 * This is required especially for serial console.
488 */
489 up->ier |= UART_IER_UUE;
490
491 /*
492 * Update the per-port timeout.
493 */
494 uart_update_timeout(port, termios->c_cflag, baud);
495
496 up->port.read_status_mask = UART_LSR_OE | UART_LSR_THRE | UART_LSR_DR;
497 if (termios->c_iflag & INPCK)
498 up->port.read_status_mask |= UART_LSR_FE | UART_LSR_PE;
499 if (termios->c_iflag & (BRKINT | PARMRK))
500 up->port.read_status_mask |= UART_LSR_BI;
501
502 /*
503 * Characters to ignore
504 */
505 up->port.ignore_status_mask = 0;
506 if (termios->c_iflag & IGNPAR)
507 up->port.ignore_status_mask |= UART_LSR_PE | UART_LSR_FE;
508 if (termios->c_iflag & IGNBRK) {
509 up->port.ignore_status_mask |= UART_LSR_BI;
510 /*
511 * If we're ignoring parity and break indicators,
512 * ignore overruns too (for real raw support).
513 */
514 if (termios->c_iflag & IGNPAR)
515 up->port.ignore_status_mask |= UART_LSR_OE;
516 }
517
518 /*
519 * ignore all characters if CREAD is not set
520 */
521 if ((termios->c_cflag & CREAD) == 0)
522 up->port.ignore_status_mask |= UART_LSR_DR;
523
524 /*
525 * CTS flow control flag and modem status interrupts
526 */
527 up->ier &= ~UART_IER_MSI;
528 if (UART_ENABLE_MS(&up->port, termios->c_cflag))
529 up->ier |= UART_IER_MSI;
530
531 serial_out(up, UART_IER, up->ier);
532
533 if (termios->c_cflag & CRTSCTS)
534 up->mcr |= UART_MCR_AFE;
535 else
536 up->mcr &= ~UART_MCR_AFE;
537
538 serial_out(up, UART_LCR, cval | UART_LCR_DLAB); /* set DLAB */
539 serial_out(up, UART_DLL, quot & 0xff); /* LS of divisor */
540
541 /*
542 * work around Errata #75 according to Intel(R) PXA27x Processor Family
543 * Specification Update (Nov 2005)
544 */
545 dll = serial_in(up, UART_DLL);
546 WARN_ON(dll != (quot & 0xff));
547
548 serial_out(up, UART_DLM, quot >> 8); /* MS of divisor */
549 serial_out(up, UART_LCR, cval); /* reset DLAB */
550 up->lcr = cval; /* Save LCR */
551 serial_pxa_set_mctrl(&up->port, up->port.mctrl);
552 serial_out(up, UART_FCR, fcr);
553 spin_unlock_irqrestore(&up->port.lock, flags);
554 }
555
556 static void
557 serial_pxa_pm(struct uart_port *port, unsigned int state,
558 unsigned int oldstate)
559 {
560 struct uart_pxa_port *up = (struct uart_pxa_port *)port;
561
562 if (!state)
563 clk_enable(up->clk);
564 else
565 clk_disable(up->clk);
566 }
567
568 static void serial_pxa_release_port(struct uart_port *port)
569 {
570 }
571
572 static int serial_pxa_request_port(struct uart_port *port)
573 {
574 return 0;
575 }
576
577 static void serial_pxa_config_port(struct uart_port *port, int flags)
578 {
579 struct uart_pxa_port *up = (struct uart_pxa_port *)port;
580 up->port.type = PORT_PXA;
581 }
582
583 static int
584 serial_pxa_verify_port(struct uart_port *port, struct serial_struct *ser)
585 {
586 /* we don't want the core code to modify any port params */
587 return -EINVAL;
588 }
589
590 static const char *
591 serial_pxa_type(struct uart_port *port)
592 {
593 struct uart_pxa_port *up = (struct uart_pxa_port *)port;
594 return up->name;
595 }
596
597 static struct uart_pxa_port *serial_pxa_ports[4];
598 static struct uart_driver serial_pxa_reg;
599
600 #ifdef CONFIG_SERIAL_PXA_CONSOLE
601
602 #define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE)
603
604 /*
605 * Wait for transmitter & holding register to empty
606 */
607 static inline void wait_for_xmitr(struct uart_pxa_port *up)
608 {
609 unsigned int status, tmout = 10000;
610
611 /* Wait up to 10ms for the character(s) to be sent. */
612 do {
613 status = serial_in(up, UART_LSR);
614
615 if (status & UART_LSR_BI)
616 up->lsr_break_flag = UART_LSR_BI;
617
618 if (--tmout == 0)
619 break;
620 udelay(1);
621 } while ((status & BOTH_EMPTY) != BOTH_EMPTY);
622
623 /* Wait up to 1s for flow control if necessary */
624 if (up->port.flags & UPF_CONS_FLOW) {
625 tmout = 1000000;
626 while (--tmout &&
627 ((serial_in(up, UART_MSR) & UART_MSR_CTS) == 0))
628 udelay(1);
629 }
630 }
631
632 static void serial_pxa_console_putchar(struct uart_port *port, int ch)
633 {
634 struct uart_pxa_port *up = (struct uart_pxa_port *)port;
635
636 wait_for_xmitr(up);
637 serial_out(up, UART_TX, ch);
638 }
639
640 /*
641 * Print a string to the serial port trying not to disturb
642 * any possible real use of the port...
643 *
644 * The console_lock must be held when we get here.
645 */
646 static void
647 serial_pxa_console_write(struct console *co, const char *s, unsigned int count)
648 {
649 struct uart_pxa_port *up = serial_pxa_ports[co->index];
650 unsigned int ier;
651
652 clk_enable(up->clk);
653
654 /*
655 * First save the IER then disable the interrupts
656 */
657 ier = serial_in(up, UART_IER);
658 serial_out(up, UART_IER, UART_IER_UUE);
659
660 uart_console_write(&up->port, s, count, serial_pxa_console_putchar);
661
662 /*
663 * Finally, wait for transmitter to become empty
664 * and restore the IER
665 */
666 wait_for_xmitr(up);
667 serial_out(up, UART_IER, ier);
668
669 clk_disable(up->clk);
670 }
671
672 static int __init
673 serial_pxa_console_setup(struct console *co, char *options)
674 {
675 struct uart_pxa_port *up;
676 int baud = 9600;
677 int bits = 8;
678 int parity = 'n';
679 int flow = 'n';
680
681 if (co->index == -1 || co->index >= serial_pxa_reg.nr)
682 co->index = 0;
683 up = serial_pxa_ports[co->index];
684 if (!up)
685 return -ENODEV;
686
687 if (options)
688 uart_parse_options(options, &baud, &parity, &bits, &flow);
689
690 return uart_set_options(&up->port, co, baud, parity, bits, flow);
691 }
692
693 static struct console serial_pxa_console = {
694 .name = "ttyS",
695 .write = serial_pxa_console_write,
696 .device = uart_console_device,
697 .setup = serial_pxa_console_setup,
698 .flags = CON_PRINTBUFFER,
699 .index = -1,
700 .data = &serial_pxa_reg,
701 };
702
703 #define PXA_CONSOLE &serial_pxa_console
704 #else
705 #define PXA_CONSOLE NULL
706 #endif
707
708 struct uart_ops serial_pxa_pops = {
709 .tx_empty = serial_pxa_tx_empty,
710 .set_mctrl = serial_pxa_set_mctrl,
711 .get_mctrl = serial_pxa_get_mctrl,
712 .stop_tx = serial_pxa_stop_tx,
713 .start_tx = serial_pxa_start_tx,
714 .stop_rx = serial_pxa_stop_rx,
715 .enable_ms = serial_pxa_enable_ms,
716 .break_ctl = serial_pxa_break_ctl,
717 .startup = serial_pxa_startup,
718 .shutdown = serial_pxa_shutdown,
719 .set_termios = serial_pxa_set_termios,
720 .pm = serial_pxa_pm,
721 .type = serial_pxa_type,
722 .release_port = serial_pxa_release_port,
723 .request_port = serial_pxa_request_port,
724 .config_port = serial_pxa_config_port,
725 .verify_port = serial_pxa_verify_port,
726 };
727
728 static struct uart_driver serial_pxa_reg = {
729 .owner = THIS_MODULE,
730 .driver_name = "PXA serial",
731 .dev_name = "ttyS",
732 .major = TTY_MAJOR,
733 .minor = 64,
734 .nr = 4,
735 .cons = PXA_CONSOLE,
736 };
737
738 #ifdef CONFIG_PM
739 static int serial_pxa_suspend(struct device *dev)
740 {
741 struct uart_pxa_port *sport = dev_get_drvdata(dev);
742
743 if (sport)
744 uart_suspend_port(&serial_pxa_reg, &sport->port);
745
746 return 0;
747 }
748
749 static int serial_pxa_resume(struct device *dev)
750 {
751 struct uart_pxa_port *sport = dev_get_drvdata(dev);
752
753 if (sport)
754 uart_resume_port(&serial_pxa_reg, &sport->port);
755
756 return 0;
757 }
758
759 static const struct dev_pm_ops serial_pxa_pm_ops = {
760 .suspend = serial_pxa_suspend,
761 .resume = serial_pxa_resume,
762 };
763 #endif
764
765 static int serial_pxa_probe(struct platform_device *dev)
766 {
767 struct uart_pxa_port *sport;
768 struct resource *mmres, *irqres;
769 int ret;
770
771 mmres = platform_get_resource(dev, IORESOURCE_MEM, 0);
772 irqres = platform_get_resource(dev, IORESOURCE_IRQ, 0);
773 if (!mmres || !irqres)
774 return -ENODEV;
775
776 sport = kzalloc(sizeof(struct uart_pxa_port), GFP_KERNEL);
777 if (!sport)
778 return -ENOMEM;
779
780 sport->clk = clk_get(&dev->dev, NULL);
781 if (IS_ERR(sport->clk)) {
782 ret = PTR_ERR(sport->clk);
783 goto err_free;
784 }
785
786 sport->port.type = PORT_PXA;
787 sport->port.iotype = UPIO_MEM;
788 sport->port.mapbase = mmres->start;
789 sport->port.irq = irqres->start;
790 sport->port.fifosize = 64;
791 sport->port.ops = &serial_pxa_pops;
792 sport->port.line = dev->id;
793 sport->port.dev = &dev->dev;
794 sport->port.flags = UPF_IOREMAP | UPF_BOOT_AUTOCONF;
795 sport->port.uartclk = clk_get_rate(sport->clk);
796
797 switch (dev->id) {
798 case 0: sport->name = "FFUART"; break;
799 case 1: sport->name = "BTUART"; break;
800 case 2: sport->name = "STUART"; break;
801 case 3: sport->name = "HWUART"; break;
802 default:
803 sport->name = "???";
804 break;
805 }
806
807 sport->port.membase = ioremap(mmres->start, mmres->end - mmres->start + 1);
808 if (!sport->port.membase) {
809 ret = -ENOMEM;
810 goto err_clk;
811 }
812
813 serial_pxa_ports[dev->id] = sport;
814
815 uart_add_one_port(&serial_pxa_reg, &sport->port);
816 platform_set_drvdata(dev, sport);
817
818 return 0;
819
820 err_clk:
821 clk_put(sport->clk);
822 err_free:
823 kfree(sport);
824 return ret;
825 }
826
827 static int serial_pxa_remove(struct platform_device *dev)
828 {
829 struct uart_pxa_port *sport = platform_get_drvdata(dev);
830
831 platform_set_drvdata(dev, NULL);
832
833 uart_remove_one_port(&serial_pxa_reg, &sport->port);
834 clk_put(sport->clk);
835 kfree(sport);
836
837 return 0;
838 }
839
840 static struct platform_driver serial_pxa_driver = {
841 .probe = serial_pxa_probe,
842 .remove = serial_pxa_remove,
843
844 .driver = {
845 .name = "pxa2xx-uart",
846 .owner = THIS_MODULE,
847 #ifdef CONFIG_PM
848 .pm = &serial_pxa_pm_ops,
849 #endif
850 },
851 };
852
853 int __init serial_pxa_init(void)
854 {
855 int ret;
856
857 ret = uart_register_driver(&serial_pxa_reg);
858 if (ret != 0)
859 return ret;
860
861 ret = platform_driver_register(&serial_pxa_driver);
862 if (ret != 0)
863 uart_unregister_driver(&serial_pxa_reg);
864
865 return ret;
866 }
867
868 void __exit serial_pxa_exit(void)
869 {
870 platform_driver_unregister(&serial_pxa_driver);
871 uart_unregister_driver(&serial_pxa_reg);
872 }
873
874 module_init(serial_pxa_init);
875 module_exit(serial_pxa_exit);
876
877 MODULE_LICENSE("GPL");
878 MODULE_ALIAS("platform:pxa2xx-uart");
linux 2.6 git repository for openrd