arch/powerpc/sysdev/fsl_pci.c

   1 /*
   2  * MPC85xx/86xx PCI/PCIE support routing.
   3  *
   4  * Copyright 2007 Freescale Semiconductor, Inc
   5  *
   6  * Initial author: Xianghua Xiao <x.xiao@freescale.com>
   7  * Recode: ZHANG WEI <wei.zhang@freescale.com>
   8  * Rewrite the routing for Frescale PCI and PCI Express
   9  *      Roy Zang <tie-fei.zang@freescale.com>
  10  *
  11  * This program is free software; you can redistribute  it and/or modify it
  12  * under  the terms of  the GNU General  Public License as published by the
  13  * Free Software Foundation;  either version 2 of the  License, or (at your
  14  * option) any later version.
  15  */
  16 #include <linux/kernel.h>
  17 #include <linux/pci.h>
  18 #include <linux/delay.h>
  19 #include <linux/string.h>
  20 #include <linux/init.h>
  21 #include <linux/bootmem.h>
  22
  23 #include <asm/io.h>
  24 #include <asm/prom.h>
  25 #include <asm/pci-bridge.h>
  26 #include <asm/machdep.h>
  27 #include <sysdev/fsl_soc.h>
  28 #include <sysdev/fsl_pci.h>
  29
  30 /* atmu setup for fsl pci/pcie controller */
  31 void __init setup_pci_atmu(struct pci_controller *hose, struct resource *rsrc)
  32 {
  33         struct ccsr_pci __iomem *pci;
  34         int i;
  35
  36         pr_debug("PCI memory map start 0x%x, size 0x%x\n", rsrc->start,
  37                         rsrc->end - rsrc->start + 1);
  38         pci = ioremap(rsrc->start, rsrc->end - rsrc->start + 1);
  39
  40         /* Disable all windows (except powar0 since its ignored) */
  41         for(i = 1; i < 5; i++)
  42                 out_be32(&pci->pow[i].powar, 0);
  43         for(i = 0; i < 3; i++)
  44                 out_be32(&pci->piw[i].piwar, 0);
  45
  46         /* Setup outbound MEM window */
  47         for(i = 0; i < 3; i++)
  48                 if (hose->mem_resources[i].flags & IORESOURCE_MEM){
  49                         pr_debug("PCI MEM resource start 0x%08x, size 0x%08x.\n",
  50                                 hose->mem_resources[i].start,
  51                                 hose->mem_resources[i].end
  52                                   - hose->mem_resources[i].start + 1);
  53                         out_be32(&pci->pow[i+1].potar,
  54                                 (hose->mem_resources[i].start >> 12)
  55                                 & 0x000fffff);
  56                         out_be32(&pci->pow[i+1].potear, 0);
  57                         out_be32(&pci->pow[i+1].powbar,
  58                                 (hose->mem_resources[i].start >> 12)
  59                                 & 0x000fffff);
  60                         /* Enable, Mem R/W */
  61                         out_be32(&pci->pow[i+1].powar, 0x80044000
  62                                 | (__ilog2(hose->mem_resources[i].end
  63                                 - hose->mem_resources[i].start + 1) - 1));
  64                 }
  65
  66         /* Setup outbound IO window */
  67         if (hose->io_resource.flags & IORESOURCE_IO){
  68                 pr_debug("PCI IO resource start 0x%08x, size 0x%08x, phy base 0x%08x.\n",
  69                         hose->io_resource.start,
  70                         hose->io_resource.end - hose->io_resource.start + 1,
  71                         hose->io_base_phys);
  72                 out_be32(&pci->pow[i+1].potar, (hose->io_resource.start >> 12)
  73                                 & 0x000fffff);
  74                 out_be32(&pci->pow[i+1].potear, 0);
  75                 out_be32(&pci->pow[i+1].powbar, (hose->io_base_phys >> 12)
  76                                 & 0x000fffff);
  77                 /* Enable, IO R/W */
  78                 out_be32(&pci->pow[i+1].powar, 0x80088000
  79                         | (__ilog2(hose->io_resource.end
  80                         - hose->io_resource.start + 1) - 1));
  81         }
  82
  83         /* Setup 2G inbound Memory Window @ 1 */
  84         out_be32(&pci->piw[2].pitar, 0x00000000);
  85         out_be32(&pci->piw[2].piwbar,0x00000000);
  86         out_be32(&pci->piw[2].piwar, PIWAR_2G);
  87 }
  88
  89 void __init setup_pci_cmd(struct pci_controller *hose)
  90 {
  91         u16 cmd;
  92         int cap_x;
  93
  94         early_read_config_word(hose, 0, 0, PCI_COMMAND, &cmd);
  95         cmd |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY
  96                 | PCI_COMMAND_IO;
  97         early_write_config_word(hose, 0, 0, PCI_COMMAND, cmd);
  98
  99         cap_x = early_find_capability(hose, 0, 0, PCI_CAP_ID_PCIX);
 100         if (cap_x) {
 101                 int pci_x_cmd = cap_x + PCI_X_CMD;
 102                 cmd = PCI_X_CMD_MAX_SPLIT | PCI_X_CMD_MAX_READ
 103                         | PCI_X_CMD_ERO | PCI_X_CMD_DPERR_E;
 104                 early_write_config_word(hose, 0, 0, pci_x_cmd, cmd);
 105         } else {
 106                 early_write_config_byte(hose, 0, 0, PCI_LATENCY_TIMER, 0x80);
 107         }
 108 }
 109
 110 static void __devinit quirk_fsl_pcie_transparent(struct pci_dev *dev)
 111 {
 112         struct resource *res;
 113         int i, res_idx = PCI_BRIDGE_RESOURCES;
 114         struct pci_controller *hose;
 115
 116         /* if we aren't a PCIe don't bother */
 117         if (!pci_find_capability(dev, PCI_CAP_ID_EXP))
 118                 return ;
 119
 120         /*
 121          * Make the bridge be transparent.
 122          */
 123         dev->transparent = 1;
 124
 125         hose = pci_bus_to_host(dev->bus);
 126         if (!hose) {
 127                 printk(KERN_ERR "Can't find hose for bus %d\n",
 128                        dev->bus->number);
 129                 return;
 130         }
 131
 132         /* Clear out any of the virtual P2P bridge registers */
 133         pci_write_config_word(dev, PCI_IO_BASE_UPPER16, 0);
 134         pci_write_config_word(dev, PCI_IO_LIMIT_UPPER16, 0);
 135         pci_write_config_byte(dev, PCI_IO_BASE, 0x10);
 136         pci_write_config_byte(dev, PCI_IO_LIMIT, 0);
 137         pci_write_config_word(dev, PCI_MEMORY_BASE, 0x10);
 138         pci_write_config_word(dev, PCI_MEMORY_LIMIT, 0);
 139         pci_write_config_word(dev, PCI_PREF_BASE_UPPER32, 0x0);
 140         pci_write_config_word(dev, PCI_PREF_LIMIT_UPPER32, 0x0);
 141         pci_write_config_word(dev, PCI_PREF_MEMORY_BASE, 0x10);
 142         pci_write_config_word(dev, PCI_PREF_MEMORY_LIMIT, 0);
 143
 144         if (hose->io_resource.flags) {
 145                 res = &dev->resource[res_idx++];
 146                 res->start = hose->io_resource.start;
 147                 res->end = hose->io_resource.end;
 148                 res->flags = hose->io_resource.flags;
 149                 update_bridge_resource(dev, res);
 150         }
 151
 152         for (i = 0; i < 3; i++) {
 153                 res = &dev->resource[res_idx + i];
 154                 res->start = hose->mem_resources[i].start;
 155                 res->end = hose->mem_resources[i].end;
 156                 res->flags = hose->mem_resources[i].flags;
 157                 update_bridge_resource(dev, res);
 158         }
 159 }
 160
 161 int __init fsl_pcie_check_link(struct pci_controller *hose)
 162 {
 163         u16 val;
 164         early_read_config_word(hose, 0, 0, PCIE_LTSSM, &val);
 165         if (val < PCIE_LTSSM_L0)
 166                 return 1;
 167         return 0;
 168 }
 169
 170 void fsl_pcibios_fixup_bus(struct pci_bus *bus)
 171 {
 172         struct pci_controller *hose = (struct pci_controller *) bus->sysdata;
 173         int i;
 174
 175         /* deal with bogus pci_bus when we don't have anything connected on PCIe */
 176         if (hose->indirect_type & PPC_INDIRECT_TYPE_NO_PCIE_LINK) {
 177                 if (bus->parent) {
 178                         for (i = 0; i < 4; ++i)
 179                                 bus->resource[i] = bus->parent->resource[i];
 180                 }
 181         }
 182 }
 183
 184 int __init fsl_add_bridge(struct device_node *dev, int is_primary)
 185 {
 186         int len;
 187         struct pci_controller *hose;
 188         struct resource rsrc;
 189         const int *bus_range;
 190
 191         pr_debug("Adding PCI host bridge %s\n", dev->full_name);
 192
 193         /* Fetch host bridge registers address */
 194         if (of_address_to_resource(dev, 0, &rsrc)) {
 195                 printk(KERN_WARNING "Can't get pci register base!");
 196                 return -ENOMEM;
 197         }
 198
 199         /* Get bus range if any */
 200         bus_range = of_get_property(dev, "bus-range", &len);
 201         if (bus_range == NULL || len < 2 * sizeof(int))
 202                 printk(KERN_WARNING "Can't get bus-range for %s, assume"
 203                         " bus 0\n", dev->full_name);
 204
 205         pci_assign_all_buses = 1;
 206         hose = pcibios_alloc_controller(dev);
 207         if (!hose)
 208                 return -ENOMEM;
 209
 210         hose->first_busno = bus_range ? bus_range[0] : 0x0;
 211         hose->last_busno = bus_range ? bus_range[1] : 0xff;
 212
 213         setup_indirect_pci(hose, rsrc.start, rsrc.start + 0x4,
 214                 PPC_INDIRECT_TYPE_BIG_ENDIAN);
 215         setup_pci_cmd(hose);
 216
 217         /* check PCI express link status */
 218         if (early_find_capability(hose, 0, 0, PCI_CAP_ID_EXP)) {
 219                 hose->indirect_type |= PPC_INDIRECT_TYPE_EXT_REG |
 220                         PPC_INDIRECT_TYPE_SURPRESS_PRIMARY_BUS;
 221                 if (fsl_pcie_check_link(hose))
 222                         hose->indirect_type |= PPC_INDIRECT_TYPE_NO_PCIE_LINK;
 223         }
 224
 225         printk(KERN_INFO "Found FSL PCI host bridge at 0x%016llx."
 226                 "Firmware bus number: %d->%d\n",
 227                 (unsigned long long)rsrc.start, hose->first_busno,
 228                 hose->last_busno);
 229
 230         pr_debug(" ->Hose at 0x%p, cfg_addr=0x%p,cfg_data=0x%p\n",
 231                 hose, hose->cfg_addr, hose->cfg_data);
 232
 233         /* Interpret the "ranges" property */
 234         /* This also maps the I/O region and sets isa_io/mem_base */
 235         pci_process_bridge_OF_ranges(hose, dev, is_primary);
 236
 237         /* Setup PEX window registers */
 238         setup_pci_atmu(hose, &rsrc);
 239
 240         return 0;
 241 }
 242
 243 DECLARE_PCI_FIXUP_EARLY(0x1957, PCI_DEVICE_ID_MPC8548E, quirk_fsl_pcie_transparent);
 244 DECLARE_PCI_FIXUP_EARLY(0x1957, PCI_DEVICE_ID_MPC8548, quirk_fsl_pcie_transparent);
 245 DECLARE_PCI_FIXUP_EARLY(0x1957, PCI_DEVICE_ID_MPC8543E, quirk_fsl_pcie_transparent);
 246 DECLARE_PCI_FIXUP_EARLY(0x1957, PCI_DEVICE_ID_MPC8543, quirk_fsl_pcie_transparent);
 247 DECLARE_PCI_FIXUP_EARLY(0x1957, PCI_DEVICE_ID_MPC8547E, quirk_fsl_pcie_transparent);
 248 DECLARE_PCI_FIXUP_EARLY(0x1957, PCI_DEVICE_ID_MPC8545E, quirk_fsl_pcie_transparent);
 249 DECLARE_PCI_FIXUP_EARLY(0x1957, PCI_DEVICE_ID_MPC8545, quirk_fsl_pcie_transparent);
 250 DECLARE_PCI_FIXUP_EARLY(0x1957, PCI_DEVICE_ID_MPC8568E, quirk_fsl_pcie_transparent);
 251 DECLARE_PCI_FIXUP_EARLY(0x1957, PCI_DEVICE_ID_MPC8568, quirk_fsl_pcie_transparent);
 252 DECLARE_PCI_FIXUP_EARLY(0x1957, PCI_DEVICE_ID_MPC8567E, quirk_fsl_pcie_transparent);
 253 DECLARE_PCI_FIXUP_EARLY(0x1957, PCI_DEVICE_ID_MPC8567, quirk_fsl_pcie_transparent);
 254 DECLARE_PCI_FIXUP_EARLY(0x1957, PCI_DEVICE_ID_MPC8544E, quirk_fsl_pcie_transparent);
 255 DECLARE_PCI_FIXUP_EARLY(0x1957, PCI_DEVICE_ID_MPC8544, quirk_fsl_pcie_transparent);
 256 DECLARE_PCI_FIXUP_EARLY(0x1957, PCI_DEVICE_ID_MPC8641, quirk_fsl_pcie_transparent);
 257 DECLARE_PCI_FIXUP_EARLY(0x1957, PCI_DEVICE_ID_MPC8641D, quirk_fsl_pcie_transparent);