x86: irq no should not use hex in /proc/interrupts
[linux-2.6/linux-2.6-openrd.git] / arch / arm / mach-ixp2000 / ixdp2400.c
blob4467c4224d73f23723d9e43530ae822f663b7a13
1 /*
2 * arch/arm/mach-ixp2000/ixdp2400.c
4 * IXDP2400 platform support
6 * Original Author: Naeem Afzal <naeem.m.afzal@intel.com>
7 * Maintainer: Deepak Saxena <dsaxena@plexity.net>
9 * Copyright (C) 2002 Intel Corp.
10 * Copyright (C) 2003-2004 MontaVista Software, Inc.
12 * This program is free software; you can redistribute it and/or modify it
13 * under the terms of the GNU General Public License as published by the
14 * Free Software Foundation; either version 2 of the License, or (at your
15 * option) any later version.
17 #include <linux/kernel.h>
18 #include <linux/init.h>
19 #include <linux/mm.h>
20 #include <linux/sched.h>
21 #include <linux/interrupt.h>
22 #include <linux/device.h>
23 #include <linux/bitops.h>
24 #include <linux/pci.h>
25 #include <linux/ioport.h>
26 #include <linux/slab.h>
27 #include <linux/delay.h>
28 #include <linux/io.h>
30 #include <asm/irq.h>
31 #include <asm/pgtable.h>
32 #include <asm/page.h>
33 #include <asm/system.h>
34 #include <mach/hardware.h>
35 #include <asm/mach-types.h>
37 #include <asm/mach/pci.h>
38 #include <asm/mach/map.h>
39 #include <asm/mach/irq.h>
40 #include <asm/mach/time.h>
41 #include <asm/mach/flash.h>
42 #include <asm/mach/arch.h>
44 /*************************************************************************
45 * IXDP2400 timer tick
46 *************************************************************************/
47 static void __init ixdp2400_timer_init(void)
49 int numerator, denominator;
50 int denom_array[] = {2, 4, 8, 16, 1, 2, 4, 8};
52 numerator = (*(IXDP2400_CPLD_SYS_CLK_M) & 0xFF) *2;
53 denominator = denom_array[(*(IXDP2400_CPLD_SYS_CLK_N) & 0x7)];
55 ixp2000_init_time(((3125000 * numerator) / (denominator)) / 2);
58 static struct sys_timer ixdp2400_timer = {
59 .init = ixdp2400_timer_init,
60 .offset = ixp2000_gettimeoffset,
63 /*************************************************************************
64 * IXDP2400 PCI
65 *************************************************************************/
66 void __init ixdp2400_pci_preinit(void)
68 ixp2000_reg_write(IXP2000_PCI_ADDR_EXT, 0x00100000);
69 ixp2000_pci_preinit();
70 pcibios_setup("firmware");
73 int ixdp2400_pci_setup(int nr, struct pci_sys_data *sys)
75 sys->mem_offset = 0xe0000000;
77 ixp2000_pci_setup(nr, sys);
79 return 1;
82 static int __init ixdp2400_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
84 if (ixdp2x00_master_npu()) {
87 * Root bus devices. Slave NPU is only one with interrupt.
88 * Everything else, we just return -1 b/c nothing else
89 * on the root bus has interrupts.
91 if(!dev->bus->self) {
92 if(dev->devfn == IXDP2X00_SLAVE_NPU_DEVFN )
93 return IRQ_IXDP2400_INGRESS_NPU;
95 return -1;
99 * Bridge behind the PMC slot.
100 * NOTE: Only INTA from the PMC slot is routed. VERY BAD.
102 if(dev->bus->self->devfn == IXDP2X00_PMC_DEVFN &&
103 dev->bus->parent->self->devfn == IXDP2X00_P2P_DEVFN &&
104 !dev->bus->parent->self->bus->parent)
105 return IRQ_IXDP2400_PMC;
108 * Device behind the first bridge
110 if(dev->bus->self->devfn == IXDP2X00_P2P_DEVFN) {
111 switch(dev->devfn) {
112 case IXDP2400_MASTER_ENET_DEVFN:
113 return IRQ_IXDP2400_ENET;
115 case IXDP2400_MEDIA_DEVFN:
116 return IRQ_IXDP2400_MEDIA_PCI;
118 case IXDP2400_SWITCH_FABRIC_DEVFN:
119 return IRQ_IXDP2400_SF_PCI;
121 case IXDP2X00_PMC_DEVFN:
122 return IRQ_IXDP2400_PMC;
126 return -1;
127 } else return IRQ_IXP2000_PCIB; /* Slave NIC interrupt */
131 static void ixdp2400_pci_postinit(void)
133 struct pci_dev *dev;
135 if (ixdp2x00_master_npu()) {
136 dev = pci_get_bus_and_slot(1, IXDP2400_SLAVE_ENET_DEVFN);
137 pci_remove_bus_device(dev);
138 pci_dev_put(dev);
139 } else {
140 dev = pci_get_bus_and_slot(1, IXDP2400_MASTER_ENET_DEVFN);
141 pci_remove_bus_device(dev);
142 pci_dev_put(dev);
144 ixdp2x00_slave_pci_postinit();
148 static struct hw_pci ixdp2400_pci __initdata = {
149 .nr_controllers = 1,
150 .setup = ixdp2400_pci_setup,
151 .preinit = ixdp2400_pci_preinit,
152 .postinit = ixdp2400_pci_postinit,
153 .scan = ixp2000_pci_scan_bus,
154 .map_irq = ixdp2400_pci_map_irq,
157 int __init ixdp2400_pci_init(void)
159 if (machine_is_ixdp2400())
160 pci_common_init(&ixdp2400_pci);
162 return 0;
165 subsys_initcall(ixdp2400_pci_init);
167 void __init ixdp2400_init_irq(void)
169 ixdp2x00_init_irq(IXDP2400_CPLD_INT_STAT, IXDP2400_CPLD_INT_MASK, IXDP2400_NR_IRQS);
172 MACHINE_START(IXDP2400, "Intel IXDP2400 Development Platform")
173 /* Maintainer: MontaVista Software, Inc. */
174 .phys_io = IXP2000_UART_PHYS_BASE,
175 .io_pg_offst = ((IXP2000_UART_VIRT_BASE) >> 18) & 0xfffc,
176 .boot_params = 0x00000100,
177 .map_io = ixdp2x00_map_io,
178 .init_irq = ixdp2400_init_irq,
179 .timer = &ixdp2400_timer,
180 .init_machine = ixdp2x00_init_machine,
181 MACHINE_END