Input: usbtouchscreen - remove unneeded usb_kill_urb
[linux-2.6/linux-2.6-openrd.git] / drivers / net / ppp_async.c
blob6de8399d6dd92d26875cca679ec332c19082d736
1 /*
2 * PPP async serial channel driver for Linux.
4 * Copyright 1999 Paul Mackerras.
6 * This program is free software; you can redistribute it and/or
7 * modify it under the terms of the GNU General Public License
8 * as published by the Free Software Foundation; either version
9 * 2 of the License, or (at your option) any later version.
11 * This driver provides the encapsulation and framing for sending
12 * and receiving PPP frames over async serial lines. It relies on
13 * the generic PPP layer to give it frames to send and to process
14 * received frames. It implements the PPP line discipline.
16 * Part of the code in this driver was inspired by the old async-only
17 * PPP driver, written by Michael Callahan and Al Longyear, and
18 * subsequently hacked by Paul Mackerras.
21 #include <linux/module.h>
22 #include <linux/kernel.h>
23 #include <linux/skbuff.h>
24 #include <linux/tty.h>
25 #include <linux/netdevice.h>
26 #include <linux/poll.h>
27 #include <linux/crc-ccitt.h>
28 #include <linux/ppp_defs.h>
29 #include <linux/if_ppp.h>
30 #include <linux/ppp_channel.h>
31 #include <linux/spinlock.h>
32 #include <linux/init.h>
33 #include <linux/jiffies.h>
34 #include <asm/uaccess.h>
35 #include <asm/string.h>
37 #define PPP_VERSION "2.4.2"
39 #define OBUFSIZE 256
41 /* Structure for storing local state. */
42 struct asyncppp {
43 struct tty_struct *tty;
44 unsigned int flags;
45 unsigned int state;
46 unsigned int rbits;
47 int mru;
48 spinlock_t xmit_lock;
49 spinlock_t recv_lock;
50 unsigned long xmit_flags;
51 u32 xaccm[8];
52 u32 raccm;
53 unsigned int bytes_sent;
54 unsigned int bytes_rcvd;
56 struct sk_buff *tpkt;
57 int tpkt_pos;
58 u16 tfcs;
59 unsigned char *optr;
60 unsigned char *olim;
61 unsigned long last_xmit;
63 struct sk_buff *rpkt;
64 int lcp_fcs;
65 struct sk_buff_head rqueue;
67 struct tasklet_struct tsk;
69 atomic_t refcnt;
70 struct semaphore dead_sem;
71 struct ppp_channel chan; /* interface to generic ppp layer */
72 unsigned char obuf[OBUFSIZE];
75 /* Bit numbers in xmit_flags */
76 #define XMIT_WAKEUP 0
77 #define XMIT_FULL 1
78 #define XMIT_BUSY 2
80 /* State bits */
81 #define SC_TOSS 1
82 #define SC_ESCAPE 2
83 #define SC_PREV_ERROR 4
85 /* Bits in rbits */
86 #define SC_RCV_BITS (SC_RCV_B7_1|SC_RCV_B7_0|SC_RCV_ODDP|SC_RCV_EVNP)
88 static int flag_time = HZ;
89 module_param(flag_time, int, 0);
90 MODULE_PARM_DESC(flag_time, "ppp_async: interval between flagged packets (in clock ticks)");
91 MODULE_LICENSE("GPL");
92 MODULE_ALIAS_LDISC(N_PPP);
95 * Prototypes.
97 static int ppp_async_encode(struct asyncppp *ap);
98 static int ppp_async_send(struct ppp_channel *chan, struct sk_buff *skb);
99 static int ppp_async_push(struct asyncppp *ap);
100 static void ppp_async_flush_output(struct asyncppp *ap);
101 static void ppp_async_input(struct asyncppp *ap, const unsigned char *buf,
102 char *flags, int count);
103 static int ppp_async_ioctl(struct ppp_channel *chan, unsigned int cmd,
104 unsigned long arg);
105 static void ppp_async_process(unsigned long arg);
107 static void async_lcp_peek(struct asyncppp *ap, unsigned char *data,
108 int len, int inbound);
110 static struct ppp_channel_ops async_ops = {
111 ppp_async_send,
112 ppp_async_ioctl
116 * Routines implementing the PPP line discipline.
120 * We have a potential race on dereferencing tty->disc_data,
121 * because the tty layer provides no locking at all - thus one
122 * cpu could be running ppp_asynctty_receive while another
123 * calls ppp_asynctty_close, which zeroes tty->disc_data and
124 * frees the memory that ppp_asynctty_receive is using. The best
125 * way to fix this is to use a rwlock in the tty struct, but for now
126 * we use a single global rwlock for all ttys in ppp line discipline.
128 * FIXME: this is no longer true. The _close path for the ldisc is
129 * now guaranteed to be sane.
131 static DEFINE_RWLOCK(disc_data_lock);
133 static struct asyncppp *ap_get(struct tty_struct *tty)
135 struct asyncppp *ap;
137 read_lock(&disc_data_lock);
138 ap = tty->disc_data;
139 if (ap != NULL)
140 atomic_inc(&ap->refcnt);
141 read_unlock(&disc_data_lock);
142 return ap;
145 static void ap_put(struct asyncppp *ap)
147 if (atomic_dec_and_test(&ap->refcnt))
148 up(&ap->dead_sem);
152 * Called when a tty is put into PPP line discipline. Called in process
153 * context.
155 static int
156 ppp_asynctty_open(struct tty_struct *tty)
158 struct asyncppp *ap;
159 int err;
160 int speed;
162 if (tty->ops->write == NULL)
163 return -EOPNOTSUPP;
165 err = -ENOMEM;
166 ap = kzalloc(sizeof(*ap), GFP_KERNEL);
167 if (!ap)
168 goto out;
170 /* initialize the asyncppp structure */
171 ap->tty = tty;
172 ap->mru = PPP_MRU;
173 spin_lock_init(&ap->xmit_lock);
174 spin_lock_init(&ap->recv_lock);
175 ap->xaccm[0] = ~0U;
176 ap->xaccm[3] = 0x60000000U;
177 ap->raccm = ~0U;
178 ap->optr = ap->obuf;
179 ap->olim = ap->obuf;
180 ap->lcp_fcs = -1;
182 skb_queue_head_init(&ap->rqueue);
183 tasklet_init(&ap->tsk, ppp_async_process, (unsigned long) ap);
185 atomic_set(&ap->refcnt, 1);
186 init_MUTEX_LOCKED(&ap->dead_sem);
188 ap->chan.private = ap;
189 ap->chan.ops = &async_ops;
190 ap->chan.mtu = PPP_MRU;
191 speed = tty_get_baud_rate(tty);
192 ap->chan.speed = speed;
193 err = ppp_register_channel(&ap->chan);
194 if (err)
195 goto out_free;
197 tty->disc_data = ap;
198 tty->receive_room = 65536;
199 return 0;
201 out_free:
202 kfree(ap);
203 out:
204 return err;
208 * Called when the tty is put into another line discipline
209 * or it hangs up. We have to wait for any cpu currently
210 * executing in any of the other ppp_asynctty_* routines to
211 * finish before we can call ppp_unregister_channel and free
212 * the asyncppp struct. This routine must be called from
213 * process context, not interrupt or softirq context.
215 static void
216 ppp_asynctty_close(struct tty_struct *tty)
218 struct asyncppp *ap;
220 write_lock_irq(&disc_data_lock);
221 ap = tty->disc_data;
222 tty->disc_data = NULL;
223 write_unlock_irq(&disc_data_lock);
224 if (!ap)
225 return;
228 * We have now ensured that nobody can start using ap from now
229 * on, but we have to wait for all existing users to finish.
230 * Note that ppp_unregister_channel ensures that no calls to
231 * our channel ops (i.e. ppp_async_send/ioctl) are in progress
232 * by the time it returns.
234 if (!atomic_dec_and_test(&ap->refcnt))
235 down(&ap->dead_sem);
236 tasklet_kill(&ap->tsk);
238 ppp_unregister_channel(&ap->chan);
239 kfree_skb(ap->rpkt);
240 skb_queue_purge(&ap->rqueue);
241 kfree_skb(ap->tpkt);
242 kfree(ap);
246 * Called on tty hangup in process context.
248 * Wait for I/O to driver to complete and unregister PPP channel.
249 * This is already done by the close routine, so just call that.
251 static int ppp_asynctty_hangup(struct tty_struct *tty)
253 ppp_asynctty_close(tty);
254 return 0;
258 * Read does nothing - no data is ever available this way.
259 * Pppd reads and writes packets via /dev/ppp instead.
261 static ssize_t
262 ppp_asynctty_read(struct tty_struct *tty, struct file *file,
263 unsigned char __user *buf, size_t count)
265 return -EAGAIN;
269 * Write on the tty does nothing, the packets all come in
270 * from the ppp generic stuff.
272 static ssize_t
273 ppp_asynctty_write(struct tty_struct *tty, struct file *file,
274 const unsigned char *buf, size_t count)
276 return -EAGAIN;
280 * Called in process context only. May be re-entered by multiple
281 * ioctl calling threads.
284 static int
285 ppp_asynctty_ioctl(struct tty_struct *tty, struct file *file,
286 unsigned int cmd, unsigned long arg)
288 struct asyncppp *ap = ap_get(tty);
289 int err, val;
290 int __user *p = (int __user *)arg;
292 if (!ap)
293 return -ENXIO;
294 err = -EFAULT;
295 switch (cmd) {
296 case PPPIOCGCHAN:
297 err = -EFAULT;
298 if (put_user(ppp_channel_index(&ap->chan), p))
299 break;
300 err = 0;
301 break;
303 case PPPIOCGUNIT:
304 err = -EFAULT;
305 if (put_user(ppp_unit_number(&ap->chan), p))
306 break;
307 err = 0;
308 break;
310 case TCFLSH:
311 /* flush our buffers and the serial port's buffer */
312 if (arg == TCIOFLUSH || arg == TCOFLUSH)
313 ppp_async_flush_output(ap);
314 err = tty_perform_flush(tty, arg);
315 break;
317 case FIONREAD:
318 val = 0;
319 if (put_user(val, p))
320 break;
321 err = 0;
322 break;
324 default:
325 /* Try the various mode ioctls */
326 err = tty_mode_ioctl(tty, file, cmd, arg);
329 ap_put(ap);
330 return err;
333 /* No kernel lock - fine */
334 static unsigned int
335 ppp_asynctty_poll(struct tty_struct *tty, struct file *file, poll_table *wait)
337 return 0;
341 * This can now be called from hard interrupt level as well
342 * as soft interrupt level or mainline.
344 static void
345 ppp_asynctty_receive(struct tty_struct *tty, const unsigned char *buf,
346 char *cflags, int count)
348 struct asyncppp *ap = ap_get(tty);
349 unsigned long flags;
351 if (!ap)
352 return;
353 spin_lock_irqsave(&ap->recv_lock, flags);
354 ppp_async_input(ap, buf, cflags, count);
355 spin_unlock_irqrestore(&ap->recv_lock, flags);
356 if (!skb_queue_empty(&ap->rqueue))
357 tasklet_schedule(&ap->tsk);
358 ap_put(ap);
359 tty_unthrottle(tty);
362 static void
363 ppp_asynctty_wakeup(struct tty_struct *tty)
365 struct asyncppp *ap = ap_get(tty);
367 clear_bit(TTY_DO_WRITE_WAKEUP, &tty->flags);
368 if (!ap)
369 return;
370 set_bit(XMIT_WAKEUP, &ap->xmit_flags);
371 tasklet_schedule(&ap->tsk);
372 ap_put(ap);
376 static struct tty_ldisc_ops ppp_ldisc = {
377 .owner = THIS_MODULE,
378 .magic = TTY_LDISC_MAGIC,
379 .name = "ppp",
380 .open = ppp_asynctty_open,
381 .close = ppp_asynctty_close,
382 .hangup = ppp_asynctty_hangup,
383 .read = ppp_asynctty_read,
384 .write = ppp_asynctty_write,
385 .ioctl = ppp_asynctty_ioctl,
386 .poll = ppp_asynctty_poll,
387 .receive_buf = ppp_asynctty_receive,
388 .write_wakeup = ppp_asynctty_wakeup,
391 static int __init
392 ppp_async_init(void)
394 int err;
396 err = tty_register_ldisc(N_PPP, &ppp_ldisc);
397 if (err != 0)
398 printk(KERN_ERR "PPP_async: error %d registering line disc.\n",
399 err);
400 return err;
404 * The following routines provide the PPP channel interface.
406 static int
407 ppp_async_ioctl(struct ppp_channel *chan, unsigned int cmd, unsigned long arg)
409 struct asyncppp *ap = chan->private;
410 void __user *argp = (void __user *)arg;
411 int __user *p = argp;
412 int err, val;
413 u32 accm[8];
415 err = -EFAULT;
416 switch (cmd) {
417 case PPPIOCGFLAGS:
418 val = ap->flags | ap->rbits;
419 if (put_user(val, p))
420 break;
421 err = 0;
422 break;
423 case PPPIOCSFLAGS:
424 if (get_user(val, p))
425 break;
426 ap->flags = val & ~SC_RCV_BITS;
427 spin_lock_irq(&ap->recv_lock);
428 ap->rbits = val & SC_RCV_BITS;
429 spin_unlock_irq(&ap->recv_lock);
430 err = 0;
431 break;
433 case PPPIOCGASYNCMAP:
434 if (put_user(ap->xaccm[0], (u32 __user *)argp))
435 break;
436 err = 0;
437 break;
438 case PPPIOCSASYNCMAP:
439 if (get_user(ap->xaccm[0], (u32 __user *)argp))
440 break;
441 err = 0;
442 break;
444 case PPPIOCGRASYNCMAP:
445 if (put_user(ap->raccm, (u32 __user *)argp))
446 break;
447 err = 0;
448 break;
449 case PPPIOCSRASYNCMAP:
450 if (get_user(ap->raccm, (u32 __user *)argp))
451 break;
452 err = 0;
453 break;
455 case PPPIOCGXASYNCMAP:
456 if (copy_to_user(argp, ap->xaccm, sizeof(ap->xaccm)))
457 break;
458 err = 0;
459 break;
460 case PPPIOCSXASYNCMAP:
461 if (copy_from_user(accm, argp, sizeof(accm)))
462 break;
463 accm[2] &= ~0x40000000U; /* can't escape 0x5e */
464 accm[3] |= 0x60000000U; /* must escape 0x7d, 0x7e */
465 memcpy(ap->xaccm, accm, sizeof(ap->xaccm));
466 err = 0;
467 break;
469 case PPPIOCGMRU:
470 if (put_user(ap->mru, p))
471 break;
472 err = 0;
473 break;
474 case PPPIOCSMRU:
475 if (get_user(val, p))
476 break;
477 if (val < PPP_MRU)
478 val = PPP_MRU;
479 ap->mru = val;
480 err = 0;
481 break;
483 default:
484 err = -ENOTTY;
487 return err;
491 * This is called at softirq level to deliver received packets
492 * to the ppp_generic code, and to tell the ppp_generic code
493 * if we can accept more output now.
495 static void ppp_async_process(unsigned long arg)
497 struct asyncppp *ap = (struct asyncppp *) arg;
498 struct sk_buff *skb;
500 /* process received packets */
501 while ((skb = skb_dequeue(&ap->rqueue)) != NULL) {
502 if (skb->cb[0])
503 ppp_input_error(&ap->chan, 0);
504 ppp_input(&ap->chan, skb);
507 /* try to push more stuff out */
508 if (test_bit(XMIT_WAKEUP, &ap->xmit_flags) && ppp_async_push(ap))
509 ppp_output_wakeup(&ap->chan);
513 * Procedures for encapsulation and framing.
517 * Procedure to encode the data for async serial transmission.
518 * Does octet stuffing (escaping), puts the address/control bytes
519 * on if A/C compression is disabled, and does protocol compression.
520 * Assumes ap->tpkt != 0 on entry.
521 * Returns 1 if we finished the current frame, 0 otherwise.
524 #define PUT_BYTE(ap, buf, c, islcp) do { \
525 if ((islcp && c < 0x20) || (ap->xaccm[c >> 5] & (1 << (c & 0x1f)))) {\
526 *buf++ = PPP_ESCAPE; \
527 *buf++ = c ^ 0x20; \
528 } else \
529 *buf++ = c; \
530 } while (0)
532 static int
533 ppp_async_encode(struct asyncppp *ap)
535 int fcs, i, count, c, proto;
536 unsigned char *buf, *buflim;
537 unsigned char *data;
538 int islcp;
540 buf = ap->obuf;
541 ap->olim = buf;
542 ap->optr = buf;
543 i = ap->tpkt_pos;
544 data = ap->tpkt->data;
545 count = ap->tpkt->len;
546 fcs = ap->tfcs;
547 proto = (data[0] << 8) + data[1];
550 * LCP packets with code values between 1 (configure-reqest)
551 * and 7 (code-reject) must be sent as though no options
552 * had been negotiated.
554 islcp = proto == PPP_LCP && 1 <= data[2] && data[2] <= 7;
556 if (i == 0) {
557 if (islcp)
558 async_lcp_peek(ap, data, count, 0);
561 * Start of a new packet - insert the leading FLAG
562 * character if necessary.
564 if (islcp || flag_time == 0
565 || time_after_eq(jiffies, ap->last_xmit + flag_time))
566 *buf++ = PPP_FLAG;
567 ap->last_xmit = jiffies;
568 fcs = PPP_INITFCS;
571 * Put in the address/control bytes if necessary
573 if ((ap->flags & SC_COMP_AC) == 0 || islcp) {
574 PUT_BYTE(ap, buf, 0xff, islcp);
575 fcs = PPP_FCS(fcs, 0xff);
576 PUT_BYTE(ap, buf, 0x03, islcp);
577 fcs = PPP_FCS(fcs, 0x03);
582 * Once we put in the last byte, we need to put in the FCS
583 * and closing flag, so make sure there is at least 7 bytes
584 * of free space in the output buffer.
586 buflim = ap->obuf + OBUFSIZE - 6;
587 while (i < count && buf < buflim) {
588 c = data[i++];
589 if (i == 1 && c == 0 && (ap->flags & SC_COMP_PROT))
590 continue; /* compress protocol field */
591 fcs = PPP_FCS(fcs, c);
592 PUT_BYTE(ap, buf, c, islcp);
595 if (i < count) {
597 * Remember where we are up to in this packet.
599 ap->olim = buf;
600 ap->tpkt_pos = i;
601 ap->tfcs = fcs;
602 return 0;
606 * We have finished the packet. Add the FCS and flag.
608 fcs = ~fcs;
609 c = fcs & 0xff;
610 PUT_BYTE(ap, buf, c, islcp);
611 c = (fcs >> 8) & 0xff;
612 PUT_BYTE(ap, buf, c, islcp);
613 *buf++ = PPP_FLAG;
614 ap->olim = buf;
616 kfree_skb(ap->tpkt);
617 ap->tpkt = NULL;
618 return 1;
622 * Transmit-side routines.
626 * Send a packet to the peer over an async tty line.
627 * Returns 1 iff the packet was accepted.
628 * If the packet was not accepted, we will call ppp_output_wakeup
629 * at some later time.
631 static int
632 ppp_async_send(struct ppp_channel *chan, struct sk_buff *skb)
634 struct asyncppp *ap = chan->private;
636 ppp_async_push(ap);
638 if (test_and_set_bit(XMIT_FULL, &ap->xmit_flags))
639 return 0; /* already full */
640 ap->tpkt = skb;
641 ap->tpkt_pos = 0;
643 ppp_async_push(ap);
644 return 1;
648 * Push as much data as possible out to the tty.
650 static int
651 ppp_async_push(struct asyncppp *ap)
653 int avail, sent, done = 0;
654 struct tty_struct *tty = ap->tty;
655 int tty_stuffed = 0;
658 * We can get called recursively here if the tty write
659 * function calls our wakeup function. This can happen
660 * for example on a pty with both the master and slave
661 * set to PPP line discipline.
662 * We use the XMIT_BUSY bit to detect this and get out,
663 * leaving the XMIT_WAKEUP bit set to tell the other
664 * instance that it may now be able to write more now.
666 if (test_and_set_bit(XMIT_BUSY, &ap->xmit_flags))
667 return 0;
668 spin_lock_bh(&ap->xmit_lock);
669 for (;;) {
670 if (test_and_clear_bit(XMIT_WAKEUP, &ap->xmit_flags))
671 tty_stuffed = 0;
672 if (!tty_stuffed && ap->optr < ap->olim) {
673 avail = ap->olim - ap->optr;
674 set_bit(TTY_DO_WRITE_WAKEUP, &tty->flags);
675 sent = tty->ops->write(tty, ap->optr, avail);
676 if (sent < 0)
677 goto flush; /* error, e.g. loss of CD */
678 ap->optr += sent;
679 if (sent < avail)
680 tty_stuffed = 1;
681 continue;
683 if (ap->optr >= ap->olim && ap->tpkt) {
684 if (ppp_async_encode(ap)) {
685 /* finished processing ap->tpkt */
686 clear_bit(XMIT_FULL, &ap->xmit_flags);
687 done = 1;
689 continue;
692 * We haven't made any progress this time around.
693 * Clear XMIT_BUSY to let other callers in, but
694 * after doing so we have to check if anyone set
695 * XMIT_WAKEUP since we last checked it. If they
696 * did, we should try again to set XMIT_BUSY and go
697 * around again in case XMIT_BUSY was still set when
698 * the other caller tried.
700 clear_bit(XMIT_BUSY, &ap->xmit_flags);
701 /* any more work to do? if not, exit the loop */
702 if (!(test_bit(XMIT_WAKEUP, &ap->xmit_flags)
703 || (!tty_stuffed && ap->tpkt)))
704 break;
705 /* more work to do, see if we can do it now */
706 if (test_and_set_bit(XMIT_BUSY, &ap->xmit_flags))
707 break;
709 spin_unlock_bh(&ap->xmit_lock);
710 return done;
712 flush:
713 clear_bit(XMIT_BUSY, &ap->xmit_flags);
714 if (ap->tpkt) {
715 kfree_skb(ap->tpkt);
716 ap->tpkt = NULL;
717 clear_bit(XMIT_FULL, &ap->xmit_flags);
718 done = 1;
720 ap->optr = ap->olim;
721 spin_unlock_bh(&ap->xmit_lock);
722 return done;
726 * Flush output from our internal buffers.
727 * Called for the TCFLSH ioctl. Can be entered in parallel
728 * but this is covered by the xmit_lock.
730 static void
731 ppp_async_flush_output(struct asyncppp *ap)
733 int done = 0;
735 spin_lock_bh(&ap->xmit_lock);
736 ap->optr = ap->olim;
737 if (ap->tpkt != NULL) {
738 kfree_skb(ap->tpkt);
739 ap->tpkt = NULL;
740 clear_bit(XMIT_FULL, &ap->xmit_flags);
741 done = 1;
743 spin_unlock_bh(&ap->xmit_lock);
744 if (done)
745 ppp_output_wakeup(&ap->chan);
749 * Receive-side routines.
752 /* see how many ordinary chars there are at the start of buf */
753 static inline int
754 scan_ordinary(struct asyncppp *ap, const unsigned char *buf, int count)
756 int i, c;
758 for (i = 0; i < count; ++i) {
759 c = buf[i];
760 if (c == PPP_ESCAPE || c == PPP_FLAG
761 || (c < 0x20 && (ap->raccm & (1 << c)) != 0))
762 break;
764 return i;
767 /* called when a flag is seen - do end-of-packet processing */
768 static void
769 process_input_packet(struct asyncppp *ap)
771 struct sk_buff *skb;
772 unsigned char *p;
773 unsigned int len, fcs, proto;
775 skb = ap->rpkt;
776 if (ap->state & (SC_TOSS | SC_ESCAPE))
777 goto err;
779 if (skb == NULL)
780 return; /* 0-length packet */
782 /* check the FCS */
783 p = skb->data;
784 len = skb->len;
785 if (len < 3)
786 goto err; /* too short */
787 fcs = PPP_INITFCS;
788 for (; len > 0; --len)
789 fcs = PPP_FCS(fcs, *p++);
790 if (fcs != PPP_GOODFCS)
791 goto err; /* bad FCS */
792 skb_trim(skb, skb->len - 2);
794 /* check for address/control and protocol compression */
795 p = skb->data;
796 if (p[0] == PPP_ALLSTATIONS) {
797 /* chop off address/control */
798 if (p[1] != PPP_UI || skb->len < 3)
799 goto err;
800 p = skb_pull(skb, 2);
802 proto = p[0];
803 if (proto & 1) {
804 /* protocol is compressed */
805 skb_push(skb, 1)[0] = 0;
806 } else {
807 if (skb->len < 2)
808 goto err;
809 proto = (proto << 8) + p[1];
810 if (proto == PPP_LCP)
811 async_lcp_peek(ap, p, skb->len, 1);
814 /* queue the frame to be processed */
815 skb->cb[0] = ap->state;
816 skb_queue_tail(&ap->rqueue, skb);
817 ap->rpkt = NULL;
818 ap->state = 0;
819 return;
821 err:
822 /* frame had an error, remember that, reset SC_TOSS & SC_ESCAPE */
823 ap->state = SC_PREV_ERROR;
824 if (skb) {
825 /* make skb appear as freshly allocated */
826 skb_trim(skb, 0);
827 skb_reserve(skb, - skb_headroom(skb));
831 /* Called when the tty driver has data for us. Runs parallel with the
832 other ldisc functions but will not be re-entered */
834 static void
835 ppp_async_input(struct asyncppp *ap, const unsigned char *buf,
836 char *flags, int count)
838 struct sk_buff *skb;
839 int c, i, j, n, s, f;
840 unsigned char *sp;
842 /* update bits used for 8-bit cleanness detection */
843 if (~ap->rbits & SC_RCV_BITS) {
844 s = 0;
845 for (i = 0; i < count; ++i) {
846 c = buf[i];
847 if (flags && flags[i] != 0)
848 continue;
849 s |= (c & 0x80)? SC_RCV_B7_1: SC_RCV_B7_0;
850 c = ((c >> 4) ^ c) & 0xf;
851 s |= (0x6996 & (1 << c))? SC_RCV_ODDP: SC_RCV_EVNP;
853 ap->rbits |= s;
856 while (count > 0) {
857 /* scan through and see how many chars we can do in bulk */
858 if ((ap->state & SC_ESCAPE) && buf[0] == PPP_ESCAPE)
859 n = 1;
860 else
861 n = scan_ordinary(ap, buf, count);
863 f = 0;
864 if (flags && (ap->state & SC_TOSS) == 0) {
865 /* check the flags to see if any char had an error */
866 for (j = 0; j < n; ++j)
867 if ((f = flags[j]) != 0)
868 break;
870 if (f != 0) {
871 /* start tossing */
872 ap->state |= SC_TOSS;
874 } else if (n > 0 && (ap->state & SC_TOSS) == 0) {
875 /* stuff the chars in the skb */
876 skb = ap->rpkt;
877 if (!skb) {
878 skb = dev_alloc_skb(ap->mru + PPP_HDRLEN + 2);
879 if (!skb)
880 goto nomem;
881 ap->rpkt = skb;
883 if (skb->len == 0) {
884 /* Try to get the payload 4-byte aligned.
885 * This should match the
886 * PPP_ALLSTATIONS/PPP_UI/compressed tests in
887 * process_input_packet, but we do not have
888 * enough chars here to test buf[1] and buf[2].
890 if (buf[0] != PPP_ALLSTATIONS)
891 skb_reserve(skb, 2 + (buf[0] & 1));
893 if (n > skb_tailroom(skb)) {
894 /* packet overflowed MRU */
895 ap->state |= SC_TOSS;
896 } else {
897 sp = skb_put(skb, n);
898 memcpy(sp, buf, n);
899 if (ap->state & SC_ESCAPE) {
900 sp[0] ^= 0x20;
901 ap->state &= ~SC_ESCAPE;
906 if (n >= count)
907 break;
909 c = buf[n];
910 if (flags != NULL && flags[n] != 0) {
911 ap->state |= SC_TOSS;
912 } else if (c == PPP_FLAG) {
913 process_input_packet(ap);
914 } else if (c == PPP_ESCAPE) {
915 ap->state |= SC_ESCAPE;
916 } else if (I_IXON(ap->tty)) {
917 if (c == START_CHAR(ap->tty))
918 start_tty(ap->tty);
919 else if (c == STOP_CHAR(ap->tty))
920 stop_tty(ap->tty);
922 /* otherwise it's a char in the recv ACCM */
923 ++n;
925 buf += n;
926 if (flags)
927 flags += n;
928 count -= n;
930 return;
932 nomem:
933 printk(KERN_ERR "PPPasync: no memory (input pkt)\n");
934 ap->state |= SC_TOSS;
938 * We look at LCP frames going past so that we can notice
939 * and react to the LCP configure-ack from the peer.
940 * In the situation where the peer has been sent a configure-ack
941 * already, LCP is up once it has sent its configure-ack
942 * so the immediately following packet can be sent with the
943 * configured LCP options. This allows us to process the following
944 * packet correctly without pppd needing to respond quickly.
946 * We only respond to the received configure-ack if we have just
947 * sent a configure-request, and the configure-ack contains the
948 * same data (this is checked using a 16-bit crc of the data).
950 #define CONFREQ 1 /* LCP code field values */
951 #define CONFACK 2
952 #define LCP_MRU 1 /* LCP option numbers */
953 #define LCP_ASYNCMAP 2
955 static void async_lcp_peek(struct asyncppp *ap, unsigned char *data,
956 int len, int inbound)
958 int dlen, fcs, i, code;
959 u32 val;
961 data += 2; /* skip protocol bytes */
962 len -= 2;
963 if (len < 4) /* 4 = code, ID, length */
964 return;
965 code = data[0];
966 if (code != CONFACK && code != CONFREQ)
967 return;
968 dlen = (data[2] << 8) + data[3];
969 if (len < dlen)
970 return; /* packet got truncated or length is bogus */
972 if (code == (inbound? CONFACK: CONFREQ)) {
974 * sent confreq or received confack:
975 * calculate the crc of the data from the ID field on.
977 fcs = PPP_INITFCS;
978 for (i = 1; i < dlen; ++i)
979 fcs = PPP_FCS(fcs, data[i]);
981 if (!inbound) {
982 /* outbound confreq - remember the crc for later */
983 ap->lcp_fcs = fcs;
984 return;
987 /* received confack, check the crc */
988 fcs ^= ap->lcp_fcs;
989 ap->lcp_fcs = -1;
990 if (fcs != 0)
991 return;
992 } else if (inbound)
993 return; /* not interested in received confreq */
995 /* process the options in the confack */
996 data += 4;
997 dlen -= 4;
998 /* data[0] is code, data[1] is length */
999 while (dlen >= 2 && dlen >= data[1] && data[1] >= 2) {
1000 switch (data[0]) {
1001 case LCP_MRU:
1002 val = (data[2] << 8) + data[3];
1003 if (inbound)
1004 ap->mru = val;
1005 else
1006 ap->chan.mtu = val;
1007 break;
1008 case LCP_ASYNCMAP:
1009 val = (data[2] << 24) + (data[3] << 16)
1010 + (data[4] << 8) + data[5];
1011 if (inbound)
1012 ap->raccm = val;
1013 else
1014 ap->xaccm[0] = val;
1015 break;
1017 dlen -= data[1];
1018 data += data[1];
1022 static void __exit ppp_async_cleanup(void)
1024 if (tty_unregister_ldisc(N_PPP) != 0)
1025 printk(KERN_ERR "failed to unregister PPP line discipline\n");
1028 module_init(ppp_async_init);
1029 module_exit(ppp_async_cleanup);