arch/blackfin/mach-bf537/boards/tcm_bf537.c

   1 /*
   2  * File:         arch/blackfin/mach-bf537/boards/tcm_bf537.c
   3  * Based on:     arch/blackfin/mach-bf533/boards/cm_bf537.c
   4  * Author:       Aidan Williams <aidan@nicta.com.au>
   5  *
   6  * Created:      2005
   7  * Description:  Board description file
   8  *
   9  * Modified:
  10  *               Copyright 2005 National ICT Australia (NICTA)
  11  *               Copyright 2004-2006 Analog Devices Inc.
  12  *
  13  * Bugs:         Enter bugs at http://blackfin.uclinux.org/
  14  *
  15  * This program is free software; you can redistribute it and/or modify
  16  * it under the terms of the GNU General Public License as published by
  17  * the Free Software Foundation; either version 2 of the License, or
  18  * (at your option) any later version.
  19  *
  20  * This program is distributed in the hope that it will be useful,
  21  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  22  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  23  * GNU General Public License for more details.
  24  *
  25  * You should have received a copy of the GNU General Public License
  26  * along with this program; if not, see the file COPYING, or write
  27  * to the Free Software Foundation, Inc.,
  28  * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  29  */
  30
  31 #include <linux/device.h>
  32 #include <linux/etherdevice.h>
  33 #include <linux/platform_device.h>
  34 #include <linux/mtd/mtd.h>
  35 #include <linux/mtd/partitions.h>
  36 #include <linux/mtd/physmap.h>
  37 #include <linux/spi/spi.h>
  38 #include <linux/spi/flash.h>
  39 #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
  40 #include <linux/usb/isp1362.h>
  41 #endif
  42 #include <linux/ata_platform.h>
  43 #include <linux/irq.h>
  44 #include <asm/dma.h>
  45 #include <asm/bfin5xx_spi.h>
  46 #include <asm/portmux.h>
  47 #include <asm/dpmc.h>
  48
  49 /*
  50  * Name the Board for the /proc/cpuinfo
  51  */
  52 const char bfin_board_name[] = "Bluetechnix TCM BF537";
  53
  54 #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
  55 /* all SPI peripherals info goes here */
  56
  57 #if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
  58 static struct mtd_partition bfin_spi_flash_partitions[] = {
  59         {
  60                 .name = "bootloader(spi)",
  61                 .size = 0x00020000,
  62                 .offset = 0,
  63                 .mask_flags = MTD_CAP_ROM
  64         }, {
  65                 .name = "linux kernel(spi)",
  66                 .size = 0xe0000,
  67                 .offset = 0x20000
  68         }, {
  69                 .name = "file system(spi)",
  70                 .size = 0x700000,
  71                 .offset = 0x00100000,
  72         }
  73 };
  74
  75 static struct flash_platform_data bfin_spi_flash_data = {
  76         .name = "m25p80",
  77         .parts = bfin_spi_flash_partitions,
  78         .nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions),
  79         .type = "m25p64",
  80 };
  81
  82 /* SPI flash chip (m25p64) */
  83 static struct bfin5xx_spi_chip spi_flash_chip_info = {
  84         .enable_dma = 0,         /* use dma transfer with this chip*/
  85         .bits_per_word = 8,
  86 };
  87 #endif
  88
  89 #if defined(CONFIG_BFIN_SPI_ADC) || defined(CONFIG_BFIN_SPI_ADC_MODULE)
  90 /* SPI ADC chip */
  91 static struct bfin5xx_spi_chip spi_adc_chip_info = {
  92         .enable_dma = 1,         /* use dma transfer with this chip*/
  93         .bits_per_word = 16,
  94 };
  95 #endif
  96
  97 #if defined(CONFIG_SND_BLACKFIN_AD1836) || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
  98 static struct bfin5xx_spi_chip ad1836_spi_chip_info = {
  99         .enable_dma = 0,
 100         .bits_per_word = 16,
 101 };
 102 #endif
 103
 104 #if defined(CONFIG_AD9960) || defined(CONFIG_AD9960_MODULE)
 105 static struct bfin5xx_spi_chip ad9960_spi_chip_info = {
 106         .enable_dma = 0,
 107         .bits_per_word = 16,
 108 };
 109 #endif
 110
 111 #if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
 112 static struct bfin5xx_spi_chip mmc_spi_chip_info = {
 113         .enable_dma = 0,
 114         .bits_per_word = 8,
 115 };
 116 #endif
 117
 118 static struct spi_board_info bfin_spi_board_info[] __initdata = {
 119 #if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
 120         {
 121                 /* the modalias must be the same as spi device driver name */
 122                 .modalias = "m25p80", /* Name of spi_driver for this device */
 123                 .max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
 124                 .bus_num = 0, /* Framework bus number */
 125                 .chip_select = 1, /* Framework chip select. On STAMP537 it is SPISSEL1*/
 126                 .platform_data = &bfin_spi_flash_data,
 127                 .controller_data = &spi_flash_chip_info,
 128                 .mode = SPI_MODE_3,
 129         },
 130 #endif
 131
 132 #if defined(CONFIG_BFIN_SPI_ADC) || defined(CONFIG_BFIN_SPI_ADC_MODULE)
 133         {
 134                 .modalias = "bfin_spi_adc", /* Name of spi_driver for this device */
 135                 .max_speed_hz = 6250000,     /* max spi clock (SCK) speed in HZ */
 136                 .bus_num = 0, /* Framework bus number */
 137                 .chip_select = 1, /* Framework chip select. */
 138                 .platform_data = NULL, /* No spi_driver specific config */
 139                 .controller_data = &spi_adc_chip_info,
 140         },
 141 #endif
 142
 143 #if defined(CONFIG_SND_BLACKFIN_AD1836) || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
 144         {
 145                 .modalias = "ad1836-spi",
 146                 .max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
 147                 .bus_num = 0,
 148                 .chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT,
 149                 .controller_data = &ad1836_spi_chip_info,
 150         },
 151 #endif
 152
 153 #if defined(CONFIG_AD9960) || defined(CONFIG_AD9960_MODULE)
 154         {
 155                 .modalias = "ad9960-spi",
 156                 .max_speed_hz = 10000000,     /* max spi clock (SCK) speed in HZ */
 157                 .bus_num = 0,
 158                 .chip_select = 1,
 159                 .controller_data = &ad9960_spi_chip_info,
 160         },
 161 #endif
 162
 163 #if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
 164         {
 165                 .modalias = "mmc_spi",
 166                 .max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
 167                 .bus_num = 0,
 168                 .chip_select = 5,
 169                 .controller_data = &mmc_spi_chip_info,
 170                 .mode = SPI_MODE_3,
 171         },
 172 #endif
 173 };
 174
 175 /* SPI (0) */
 176 static struct resource bfin_spi0_resource[] = {
 177         [0] = {
 178                 .start = SPI0_REGBASE,
 179                 .end   = SPI0_REGBASE + 0xFF,
 180                 .flags = IORESOURCE_MEM,
 181                 },
 182         [1] = {
 183                 .start = CH_SPI,
 184                 .end   = CH_SPI,
 185                 .flags = IORESOURCE_DMA,
 186         },
 187         [2] = {
 188                 .start = IRQ_SPI,
 189                 .end   = IRQ_SPI,
 190                 .flags = IORESOURCE_IRQ,
 191         }
 192 };
 193
 194 /* SPI controller data */
 195 static struct bfin5xx_spi_master bfin_spi0_info = {
 196         .num_chipselect = 8,
 197         .enable_dma = 1,  /* master has the ability to do dma transfer */
 198         .pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0},
 199 };
 200
 201 static struct platform_device bfin_spi0_device = {
 202         .name = "bfin-spi",
 203         .id = 0, /* Bus number */
 204         .num_resources = ARRAY_SIZE(bfin_spi0_resource),
 205         .resource = bfin_spi0_resource,
 206         .dev = {
 207                 .platform_data = &bfin_spi0_info, /* Passed to driver */
 208         },
 209 };
 210 #endif  /* spi master and devices */
 211
 212 #if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
 213 static struct platform_device rtc_device = {
 214         .name = "rtc-bfin",
 215         .id   = -1,
 216 };
 217 #endif
 218
 219 #if defined(CONFIG_FB_HITACHI_TX09) || defined(CONFIG_FB_HITACHI_TX09_MODULE)
 220 static struct platform_device hitachi_fb_device = {
 221         .name = "hitachi-tx09",
 222 };
 223 #endif
 224
 225 #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
 226 #include <linux/smc91x.h>
 227
 228 static struct smc91x_platdata smc91x_info = {
 229         .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
 230         .leda = RPC_LED_100_10,
 231         .ledb = RPC_LED_TX_RX,
 232 };
 233
 234 static struct resource smc91x_resources[] = {
 235         {
 236                 .start = 0x20200300,
 237                 .end = 0x20200300 + 16,
 238                 .flags = IORESOURCE_MEM,
 239         }, {
 240                 .start = IRQ_PF14,
 241                 .end = IRQ_PF14,
 242                 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
 243                 },
 244 };
 245
 246 static struct platform_device smc91x_device = {
 247         .name = "smc91x",
 248         .id = 0,
 249         .num_resources = ARRAY_SIZE(smc91x_resources),
 250         .resource = smc91x_resources,
 251         .dev    = {
 252                 .platform_data  = &smc91x_info,
 253         },
 254 };
 255 #endif
 256
 257 #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
 258 static struct resource isp1362_hcd_resources[] = {
 259         {
 260                 .start = 0x20308000,
 261                 .end = 0x20308000,
 262                 .flags = IORESOURCE_MEM,
 263         }, {
 264                 .start = 0x20308004,
 265                 .end = 0x20308004,
 266                 .flags = IORESOURCE_MEM,
 267         }, {
 268                 .start = IRQ_PG15,
 269                 .end = IRQ_PG15,
 270                 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
 271         },
 272 };
 273
 274 static struct isp1362_platform_data isp1362_priv = {
 275         .sel15Kres = 1,
 276         .clknotstop = 0,
 277         .oc_enable = 0,
 278         .int_act_high = 0,
 279         .int_edge_triggered = 0,
 280         .remote_wakeup_connected = 0,
 281         .no_power_switching = 1,
 282         .power_switching_mode = 0,
 283 };
 284
 285 static struct platform_device isp1362_hcd_device = {
 286         .name = "isp1362-hcd",
 287         .id = 0,
 288         .dev = {
 289                 .platform_data = &isp1362_priv,
 290         },
 291         .num_resources = ARRAY_SIZE(isp1362_hcd_resources),
 292         .resource = isp1362_hcd_resources,
 293 };
 294 #endif
 295
 296 #if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
 297 static struct resource net2272_bfin_resources[] = {
 298         {
 299                 .start = 0x20200000,
 300                 .end = 0x20200000 + 0x100,
 301                 .flags = IORESOURCE_MEM,
 302         }, {
 303                 .start = IRQ_PH14,
 304                 .end = IRQ_PH14,
 305                 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
 306         },
 307 };
 308
 309 static struct platform_device net2272_bfin_device = {
 310         .name = "net2272",
 311         .id = -1,
 312         .num_resources = ARRAY_SIZE(net2272_bfin_resources),
 313         .resource = net2272_bfin_resources,
 314 };
 315 #endif
 316
 317 static struct resource bfin_gpios_resources = {
 318         .start = 0,
 319         .end   = MAX_BLACKFIN_GPIOS - 1,
 320         .flags = IORESOURCE_IRQ,
 321 };
 322
 323 static struct platform_device bfin_gpios_device = {
 324         .name = "simple-gpio",
 325         .id = -1,
 326         .num_resources = 1,
 327         .resource = &bfin_gpios_resources,
 328 };
 329
 330 #if defined(CONFIG_MTD_GPIO_ADDR) || defined(CONFIG_MTD_GPIO_ADDR_MODULE)
 331 static struct mtd_partition cm_partitions[] = {
 332         {
 333                 .name   = "bootloader(nor)",
 334                 .size   = 0x40000,
 335                 .offset = 0,
 336         }, {
 337                 .name   = "linux kernel(nor)",
 338                 .size   = 0xE0000,
 339                 .offset = MTDPART_OFS_APPEND,
 340         }, {
 341                 .name   = "file system(nor)",
 342                 .size   = MTDPART_SIZ_FULL,
 343                 .offset = MTDPART_OFS_APPEND,
 344         }
 345 };
 346
 347 static struct physmap_flash_data cm_flash_data = {
 348         .width    = 2,
 349         .parts    = cm_partitions,
 350         .nr_parts = ARRAY_SIZE(cm_partitions),
 351 };
 352
 353 static unsigned cm_flash_gpios[] = { GPIO_PF4, GPIO_PF5 };
 354
 355 static struct resource cm_flash_resource[] = {
 356         {
 357                 .name  = "cfi_probe",
 358                 .start = 0x20000000,
 359                 .end   = 0x201fffff,
 360                 .flags = IORESOURCE_MEM,
 361         }, {
 362                 .start = (unsigned long)cm_flash_gpios,
 363                 .end   = ARRAY_SIZE(cm_flash_gpios),
 364                 .flags = IORESOURCE_IRQ,
 365         }
 366 };
 367
 368 static struct platform_device cm_flash_device = {
 369         .name          = "gpio-addr-flash",
 370         .id            = 0,
 371         .dev = {
 372                 .platform_data = &cm_flash_data,
 373         },
 374         .num_resources = ARRAY_SIZE(cm_flash_resource),
 375         .resource      = cm_flash_resource,
 376 };
 377 #endif
 378
 379 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
 380 static struct resource bfin_uart_resources[] = {
 381         {
 382                 .start = 0xFFC00400,
 383                 .end = 0xFFC004FF,
 384                 .flags = IORESOURCE_MEM,
 385         }, {
 386                 .start = 0xFFC02000,
 387                 .end = 0xFFC020FF,
 388                 .flags = IORESOURCE_MEM,
 389         },
 390 };
 391
 392 static struct platform_device bfin_uart_device = {
 393         .name = "bfin-uart",
 394         .id = 1,
 395         .num_resources = ARRAY_SIZE(bfin_uart_resources),
 396         .resource = bfin_uart_resources,
 397 };
 398 #endif
 399
 400 #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
 401 #ifdef CONFIG_BFIN_SIR0
 402 static struct resource bfin_sir0_resources[] = {
 403         {
 404                 .start = 0xFFC00400,
 405                 .end = 0xFFC004FF,
 406                 .flags = IORESOURCE_MEM,
 407         },
 408         {
 409                 .start = IRQ_UART0_RX,
 410                 .end = IRQ_UART0_RX+1,
 411                 .flags = IORESOURCE_IRQ,
 412         },
 413         {
 414                 .start = CH_UART0_RX,
 415                 .end = CH_UART0_RX+1,
 416                 .flags = IORESOURCE_DMA,
 417         },
 418 };
 419
 420 static struct platform_device bfin_sir0_device = {
 421         .name = "bfin_sir",
 422         .id = 0,
 423         .num_resources = ARRAY_SIZE(bfin_sir0_resources),
 424         .resource = bfin_sir0_resources,
 425 };
 426 #endif
 427 #ifdef CONFIG_BFIN_SIR1
 428 static struct resource bfin_sir1_resources[] = {
 429         {
 430                 .start = 0xFFC02000,
 431                 .end = 0xFFC020FF,
 432                 .flags = IORESOURCE_MEM,
 433         },
 434         {
 435                 .start = IRQ_UART1_RX,
 436                 .end = IRQ_UART1_RX+1,
 437                 .flags = IORESOURCE_IRQ,
 438         },
 439         {
 440                 .start = CH_UART1_RX,
 441                 .end = CH_UART1_RX+1,
 442                 .flags = IORESOURCE_DMA,
 443         },
 444 };
 445
 446 static struct platform_device bfin_sir1_device = {
 447         .name = "bfin_sir",
 448         .id = 1,
 449         .num_resources = ARRAY_SIZE(bfin_sir1_resources),
 450         .resource = bfin_sir1_resources,
 451 };
 452 #endif
 453 #endif
 454
 455 #if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
 456 static struct resource bfin_twi0_resource[] = {
 457         [0] = {
 458                 .start = TWI0_REGBASE,
 459                 .end   = TWI0_REGBASE,
 460                 .flags = IORESOURCE_MEM,
 461         },
 462         [1] = {
 463                 .start = IRQ_TWI,
 464                 .end   = IRQ_TWI,
 465                 .flags = IORESOURCE_IRQ,
 466         },
 467 };
 468
 469 static struct platform_device i2c_bfin_twi_device = {
 470         .name = "i2c-bfin-twi",
 471         .id = 0,
 472         .num_resources = ARRAY_SIZE(bfin_twi0_resource),
 473         .resource = bfin_twi0_resource,
 474 };
 475 #endif
 476
 477 #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
 478 static struct platform_device bfin_sport0_uart_device = {
 479         .name = "bfin-sport-uart",
 480         .id = 0,
 481 };
 482
 483 static struct platform_device bfin_sport1_uart_device = {
 484         .name = "bfin-sport-uart",
 485         .id = 1,
 486 };
 487 #endif
 488
 489 #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
 490 static struct platform_device bfin_mii_bus = {
 491         .name = "bfin_mii_bus",
 492 };
 493
 494 static struct platform_device bfin_mac_device = {
 495         .name = "bfin_mac",
 496         .dev.platform_data = &bfin_mii_bus,
 497 };
 498 #endif
 499
 500 #if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
 501 #define PATA_INT        IRQ_PF14
 502
 503 static struct pata_platform_info bfin_pata_platform_data = {
 504         .ioport_shift = 2,
 505         .irq_type = IRQF_TRIGGER_HIGH | IRQF_DISABLED,
 506 };
 507
 508 static struct resource bfin_pata_resources[] = {
 509         {
 510                 .start = 0x2030C000,
 511                 .end = 0x2030C01F,
 512                 .flags = IORESOURCE_MEM,
 513         },
 514         {
 515                 .start = 0x2030D018,
 516                 .end = 0x2030D01B,
 517                 .flags = IORESOURCE_MEM,
 518         },
 519         {
 520                 .start = PATA_INT,
 521                 .end = PATA_INT,
 522                 .flags = IORESOURCE_IRQ,
 523         },
 524 };
 525
 526 static struct platform_device bfin_pata_device = {
 527         .name = "pata_platform",
 528         .id = -1,
 529         .num_resources = ARRAY_SIZE(bfin_pata_resources),
 530         .resource = bfin_pata_resources,
 531         .dev = {
 532                 .platform_data = &bfin_pata_platform_data,
 533         }
 534 };
 535 #endif
 536
 537 static const unsigned int cclk_vlev_datasheet[] =
 538 {
 539         VRPAIR(VLEV_085, 250000000),
 540         VRPAIR(VLEV_090, 376000000),
 541         VRPAIR(VLEV_095, 426000000),
 542         VRPAIR(VLEV_100, 426000000),
 543         VRPAIR(VLEV_105, 476000000),
 544         VRPAIR(VLEV_110, 476000000),
 545         VRPAIR(VLEV_115, 476000000),
 546         VRPAIR(VLEV_120, 500000000),
 547         VRPAIR(VLEV_125, 533000000),
 548         VRPAIR(VLEV_130, 600000000),
 549 };
 550
 551 static struct bfin_dpmc_platform_data bfin_dmpc_vreg_data = {
 552         .tuple_tab = cclk_vlev_datasheet,
 553         .tabsize = ARRAY_SIZE(cclk_vlev_datasheet),
 554         .vr_settling_time = 25 /* us */,
 555 };
 556
 557 static struct platform_device bfin_dpmc = {
 558         .name = "bfin dpmc",
 559         .dev = {
 560                 .platform_data = &bfin_dmpc_vreg_data,
 561         },
 562 };
 563
 564 static struct platform_device *cm_bf537_devices[] __initdata = {
 565
 566         &bfin_dpmc,
 567
 568 #if defined(CONFIG_FB_HITACHI_TX09) || defined(CONFIG_FB_HITACHI_TX09_MODULE)
 569         &hitachi_fb_device,
 570 #endif
 571
 572 #if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
 573         &rtc_device,
 574 #endif
 575
 576 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
 577         &bfin_uart_device,
 578 #endif
 579
 580 #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
 581 #ifdef CONFIG_BFIN_SIR0
 582         &bfin_sir0_device,
 583 #endif
 584 #ifdef CONFIG_BFIN_SIR1
 585         &bfin_sir1_device,
 586 #endif
 587 #endif
 588
 589 #if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
 590         &i2c_bfin_twi_device,
 591 #endif
 592
 593 #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
 594         &bfin_sport0_uart_device,
 595         &bfin_sport1_uart_device,
 596 #endif
 597
 598 #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
 599         &isp1362_hcd_device,
 600 #endif
 601
 602 #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
 603         &smc91x_device,
 604 #endif
 605
 606 #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
 607         &bfin_mii_bus,
 608         &bfin_mac_device,
 609 #endif
 610
 611 #if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
 612         &net2272_bfin_device,
 613 #endif
 614
 615 #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
 616         &bfin_spi0_device,
 617 #endif
 618
 619 #if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
 620         &bfin_pata_device,
 621 #endif
 622
 623 #if defined(CONFIG_MTD_GPIO_ADDR) || defined(CONFIG_MTD_GPIO_ADDR_MODULE)
 624         &cm_flash_device,
 625 #endif
 626
 627         &bfin_gpios_device,
 628 };
 629
 630 static int __init tcm_bf537_init(void)
 631 {
 632         printk(KERN_INFO "%s(): registering device resources\n", __func__);
 633         platform_add_devices(cm_bf537_devices, ARRAY_SIZE(cm_bf537_devices));
 634 #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
 635         spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
 636 #endif
 637
 638 #if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
 639         irq_desc[PATA_INT].status |= IRQ_NOAUTOEN;
 640 #endif
 641         return 0;
 642 }
 643
 644 arch_initcall(tcm_bf537_init);
 645
 646 void bfin_get_ether_addr(char *addr)
 647 {
 648         random_ether_addr(addr);
 649         printk(KERN_WARNING "%s:%s: Setting Ethernet MAC to a random one\n", __FILE__, __func__);
 650 }
 651 EXPORT_SYMBOL(bfin_get_ether_addr);