HWPOISON: mention HWPoison in Kconfig entry
[linux-2.6/linux-2.6-openrd.git] / drivers / media / video / cafe_ccic-regs.h
blob8e2a87cdc791b1fa3018d9ee2fd0fef9f7283941
1 /*
2 * Register definitions for the m88alp01 camera interface. Offsets in bytes
3 * as given in the spec.
5 * Copyright 2006 One Laptop Per Child Association, Inc.
7 * Written by Jonathan Corbet, corbet@lwn.net.
9 * This file may be distributed under the terms of the GNU General
10 * Public License, version 2.
12 #define REG_Y0BAR 0x00
13 #define REG_Y1BAR 0x04
14 #define REG_Y2BAR 0x08
15 /* ... */
17 #define REG_IMGPITCH 0x24 /* Image pitch register */
18 #define IMGP_YP_SHFT 2 /* Y pitch params */
19 #define IMGP_YP_MASK 0x00003ffc /* Y pitch field */
20 #define IMGP_UVP_SHFT 18 /* UV pitch (planar) */
21 #define IMGP_UVP_MASK 0x3ffc0000
22 #define REG_IRQSTATRAW 0x28 /* RAW IRQ Status */
23 #define IRQ_EOF0 0x00000001 /* End of frame 0 */
24 #define IRQ_EOF1 0x00000002 /* End of frame 1 */
25 #define IRQ_EOF2 0x00000004 /* End of frame 2 */
26 #define IRQ_SOF0 0x00000008 /* Start of frame 0 */
27 #define IRQ_SOF1 0x00000010 /* Start of frame 1 */
28 #define IRQ_SOF2 0x00000020 /* Start of frame 2 */
29 #define IRQ_OVERFLOW 0x00000040 /* FIFO overflow */
30 #define IRQ_TWSIW 0x00010000 /* TWSI (smbus) write */
31 #define IRQ_TWSIR 0x00020000 /* TWSI read */
32 #define IRQ_TWSIE 0x00040000 /* TWSI error */
33 #define TWSIIRQS (IRQ_TWSIW|IRQ_TWSIR|IRQ_TWSIE)
34 #define FRAMEIRQS (IRQ_EOF0|IRQ_EOF1|IRQ_EOF2|IRQ_SOF0|IRQ_SOF1|IRQ_SOF2)
35 #define ALLIRQS (TWSIIRQS|FRAMEIRQS|IRQ_OVERFLOW)
36 #define REG_IRQMASK 0x2c /* IRQ mask - same bits as IRQSTAT */
37 #define REG_IRQSTAT 0x30 /* IRQ status / clear */
39 #define REG_IMGSIZE 0x34 /* Image size */
40 #define IMGSZ_V_MASK 0x1fff0000
41 #define IMGSZ_V_SHIFT 16
42 #define IMGSZ_H_MASK 0x00003fff
43 #define REG_IMGOFFSET 0x38 /* IMage offset */
45 #define REG_CTRL0 0x3c /* Control 0 */
46 #define C0_ENABLE 0x00000001 /* Makes the whole thing go */
48 /* Mask for all the format bits */
49 #define C0_DF_MASK 0x00fffffc /* Bits 2-23 */
51 /* RGB ordering */
52 #define C0_RGB4_RGBX 0x00000000
53 #define C0_RGB4_XRGB 0x00000004
54 #define C0_RGB4_BGRX 0x00000008
55 #define C0_RGB4_XBGR 0x0000000c
56 #define C0_RGB5_RGGB 0x00000000
57 #define C0_RGB5_GRBG 0x00000004
58 #define C0_RGB5_GBRG 0x00000008
59 #define C0_RGB5_BGGR 0x0000000c
61 /* Spec has two fields for DIN and DOUT, but they must match, so
62 combine them here. */
63 #define C0_DF_YUV 0x00000000 /* Data is YUV */
64 #define C0_DF_RGB 0x000000a0 /* ... RGB */
65 #define C0_DF_BAYER 0x00000140 /* ... Bayer */
66 /* 8-8-8 must be missing from the below - ask */
67 #define C0_RGBF_565 0x00000000
68 #define C0_RGBF_444 0x00000800
69 #define C0_RGB_BGR 0x00001000 /* Blue comes first */
70 #define C0_YUV_PLANAR 0x00000000 /* YUV 422 planar format */
71 #define C0_YUV_PACKED 0x00008000 /* YUV 422 packed */
72 #define C0_YUV_420PL 0x0000a000 /* YUV 420 planar */
73 /* Think that 420 packed must be 111 - ask */
74 #define C0_YUVE_YUYV 0x00000000 /* Y1CbY0Cr */
75 #define C0_YUVE_YVYU 0x00010000 /* Y1CrY0Cb */
76 #define C0_YUVE_VYUY 0x00020000 /* CrY1CbY0 */
77 #define C0_YUVE_UYVY 0x00030000 /* CbY1CrY0 */
78 #define C0_YUVE_XYUV 0x00000000 /* 420: .YUV */
79 #define C0_YUVE_XYVU 0x00010000 /* 420: .YVU */
80 #define C0_YUVE_XUVY 0x00020000 /* 420: .UVY */
81 #define C0_YUVE_XVUY 0x00030000 /* 420: .VUY */
82 /* Bayer bits 18,19 if needed */
83 #define C0_HPOL_LOW 0x01000000 /* HSYNC polarity active low */
84 #define C0_VPOL_LOW 0x02000000 /* VSYNC polarity active low */
85 #define C0_VCLK_LOW 0x04000000 /* VCLK on falling edge */
86 #define C0_DOWNSCALE 0x08000000 /* Enable downscaler */
87 #define C0_SIFM_MASK 0xc0000000 /* SIF mode bits */
88 #define C0_SIF_HVSYNC 0x00000000 /* Use H/VSYNC */
89 #define CO_SOF_NOSYNC 0x40000000 /* Use inband active signaling */
92 #define REG_CTRL1 0x40 /* Control 1 */
93 #define C1_444ALPHA 0x00f00000 /* Alpha field in RGB444 */
94 #define C1_ALPHA_SHFT 20
95 #define C1_DMAB32 0x00000000 /* 32-byte DMA burst */
96 #define C1_DMAB16 0x02000000 /* 16-byte DMA burst */
97 #define C1_DMAB64 0x04000000 /* 64-byte DMA burst */
98 #define C1_DMAB_MASK 0x06000000
99 #define C1_TWOBUFS 0x08000000 /* Use only two DMA buffers */
100 #define C1_PWRDWN 0x10000000 /* Power down */
102 #define REG_CLKCTRL 0x88 /* Clock control */
103 #define CLK_DIV_MASK 0x0000ffff /* Upper bits RW "reserved" */
105 #define REG_GPR 0xb4 /* General purpose register. This
106 controls inputs to the power and reset
107 pins on the OV7670 used with OLPC;
108 other deployments could differ. */
109 #define GPR_C1EN 0x00000020 /* Pad 1 (power down) enable */
110 #define GPR_C0EN 0x00000010 /* Pad 0 (reset) enable */
111 #define GPR_C1 0x00000002 /* Control 1 value */
113 * Control 0 is wired to reset on OLPC machines. For ov7x sensors,
114 * it is active low, for 0v6x, instead, it's active high. What
115 * fun.
117 #define GPR_C0 0x00000001 /* Control 0 value */
119 #define REG_TWSIC0 0xb8 /* TWSI (smbus) control 0 */
120 #define TWSIC0_EN 0x00000001 /* TWSI enable */
121 #define TWSIC0_MODE 0x00000002 /* 1 = 16-bit, 0 = 8-bit */
122 #define TWSIC0_SID 0x000003fc /* Slave ID */
123 #define TWSIC0_SID_SHIFT 2
124 #define TWSIC0_CLKDIV 0x0007fc00 /* Clock divider */
125 #define TWSIC0_MASKACK 0x00400000 /* Mask ack from sensor */
126 #define TWSIC0_OVMAGIC 0x00800000 /* Make it work on OV sensors */
128 #define REG_TWSIC1 0xbc /* TWSI control 1 */
129 #define TWSIC1_DATA 0x0000ffff /* Data to/from camchip */
130 #define TWSIC1_ADDR 0x00ff0000 /* Address (register) */
131 #define TWSIC1_ADDR_SHIFT 16
132 #define TWSIC1_READ 0x01000000 /* Set for read op */
133 #define TWSIC1_WSTAT 0x02000000 /* Write status */
134 #define TWSIC1_RVALID 0x04000000 /* Read data valid */
135 #define TWSIC1_ERROR 0x08000000 /* Something screwed up */
138 #define REG_UBAR 0xc4 /* Upper base address register */
141 * Here's the weird global control registers which are said to live
142 * way up here.
144 #define REG_GL_CSR 0x3004 /* Control/status register */
145 #define GCSR_SRS 0x00000001 /* SW Reset set */
146 #define GCSR_SRC 0x00000002 /* SW Reset clear */
147 #define GCSR_MRS 0x00000004 /* Master reset set */
148 #define GCSR_MRC 0x00000008 /* HW Reset clear */
149 #define GCSR_CCIC_EN 0x00004000 /* CCIC Clock enable */
150 #define REG_GL_IMASK 0x300c /* Interrupt mask register */
151 #define GIMSK_CCIC_EN 0x00000004 /* CCIC Interrupt enable */
153 #define REG_GL_FCR 0x3038 /* GPIO functional control register */
154 #define GFCR_GPIO_ON 0x08 /* Camera GPIO enabled */
155 #define REG_GL_GPIOR 0x315c /* GPIO register */
156 #define GGPIO_OUT 0x80000 /* GPIO output */
157 #define GGPIO_VAL 0x00008 /* Output pin value */
159 #define REG_LEN REG_GL_IMASK + 4
163 * Useful stuff that probably belongs somewhere global.
165 #define VGA_WIDTH 640
166 #define VGA_HEIGHT 480