arch/blackfin/mach-bf537/boards/tcm_bf537.c

   1 /*
   2  * File:         arch/blackfin/mach-bf537/boards/tcm_bf537.c
   3  * Based on:     arch/blackfin/mach-bf533/boards/cm_bf537.c
   4  * Author:       Aidan Williams <aidan@nicta.com.au>
   5  *
   6  * Created:      2005
   7  * Description:  Board description file
   8  *
   9  * Modified:
  10  *               Copyright 2005 National ICT Australia (NICTA)
  11  *               Copyright 2004-2006 Analog Devices Inc.
  12  *
  13  * Bugs:         Enter bugs at http://blackfin.uclinux.org/
  14  *
  15  * This program is free software; you can redistribute it and/or modify
  16  * it under the terms of the GNU General Public License as published by
  17  * the Free Software Foundation; either version 2 of the License, or
  18  * (at your option) any later version.
  19  *
  20  * This program is distributed in the hope that it will be useful,
  21  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  22  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  23  * GNU General Public License for more details.
  24  *
  25  * You should have received a copy of the GNU General Public License
  26  * along with this program; if not, see the file COPYING, or write
  27  * to the Free Software Foundation, Inc.,
  28  * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  29  */
  30
  31 #include <linux/device.h>
  32 #include <linux/etherdevice.h>
  33 #include <linux/platform_device.h>
  34 #include <linux/mtd/mtd.h>
  35 #include <linux/mtd/partitions.h>
  36 #include <linux/mtd/physmap.h>
  37 #include <linux/spi/spi.h>
  38 #include <linux/spi/flash.h>
  39 #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
  40 #include <linux/usb/isp1362.h>
  41 #endif
  42 #include <linux/ata_platform.h>
  43 #include <linux/irq.h>
  44 #include <asm/dma.h>
  45 #include <asm/bfin5xx_spi.h>
  46 #include <asm/portmux.h>
  47 #include <asm/dpmc.h>
  48
  49 /*
  50  * Name the Board for the /proc/cpuinfo
  51  */
  52 const char bfin_board_name[] = "Bluetechnix TCM BF537";
  53
  54 #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
  55 /* all SPI peripherals info goes here */
  56
  57 #if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
  58 static struct mtd_partition bfin_spi_flash_partitions[] = {
  59         {
  60                 .name = "bootloader(spi)",
  61                 .size = 0x00020000,
  62                 .offset = 0,
  63                 .mask_flags = MTD_CAP_ROM
  64         }, {
  65                 .name = "linux kernel(spi)",
  66                 .size = 0xe0000,
  67                 .offset = 0x20000
  68         }, {
  69                 .name = "file system(spi)",
  70                 .size = 0x700000,
  71                 .offset = 0x00100000,
  72         }
  73 };
  74
  75 static struct flash_platform_data bfin_spi_flash_data = {
  76         .name = "m25p80",
  77         .parts = bfin_spi_flash_partitions,
  78         .nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions),
  79         .type = "m25p64",
  80 };
  81
  82 /* SPI flash chip (m25p64) */
  83 static struct bfin5xx_spi_chip spi_flash_chip_info = {
  84         .enable_dma = 0,         /* use dma transfer with this chip*/
  85         .bits_per_word = 8,
  86 };
  87 #endif
  88
  89 #if defined(CONFIG_BFIN_SPI_ADC) || defined(CONFIG_BFIN_SPI_ADC_MODULE)
  90 /* SPI ADC chip */
  91 static struct bfin5xx_spi_chip spi_adc_chip_info = {
  92         .enable_dma = 1,         /* use dma transfer with this chip*/
  93         .bits_per_word = 16,
  94 };
  95 #endif
  96
  97 #if defined(CONFIG_SND_BLACKFIN_AD1836) || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
  98 static struct bfin5xx_spi_chip ad1836_spi_chip_info = {
  99         .enable_dma = 0,
 100         .bits_per_word = 16,
 101 };
 102 #endif
 103
 104 #if defined(CONFIG_AD9960) || defined(CONFIG_AD9960_MODULE)
 105 static struct bfin5xx_spi_chip ad9960_spi_chip_info = {
 106         .enable_dma = 0,
 107         .bits_per_word = 16,
 108 };
 109 #endif
 110
 111 #if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
 112 static struct bfin5xx_spi_chip mmc_spi_chip_info = {
 113         .enable_dma = 0,
 114         .bits_per_word = 8,
 115 };
 116 #endif
 117
 118 static struct spi_board_info bfin_spi_board_info[] __initdata = {
 119 #if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
 120         {
 121                 /* the modalias must be the same as spi device driver name */
 122                 .modalias = "m25p80", /* Name of spi_driver for this device */
 123                 .max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
 124                 .bus_num = 0, /* Framework bus number */
 125                 .chip_select = 1, /* Framework chip select. On STAMP537 it is SPISSEL1*/
 126                 .platform_data = &bfin_spi_flash_data,
 127                 .controller_data = &spi_flash_chip_info,
 128                 .mode = SPI_MODE_3,
 129         },
 130 #endif
 131
 132 #if defined(CONFIG_BFIN_SPI_ADC) || defined(CONFIG_BFIN_SPI_ADC_MODULE)
 133         {
 134                 .modalias = "bfin_spi_adc", /* Name of spi_driver for this device */
 135                 .max_speed_hz = 6250000,     /* max spi clock (SCK) speed in HZ */
 136                 .bus_num = 0, /* Framework bus number */
 137                 .chip_select = 1, /* Framework chip select. */
 138                 .platform_data = NULL, /* No spi_driver specific config */
 139                 .controller_data = &spi_adc_chip_info,
 140         },
 141 #endif
 142
 143 #if defined(CONFIG_SND_BLACKFIN_AD1836) || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
 144         {
 145                 .modalias = "ad1836-spi",
 146                 .max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
 147                 .bus_num = 0,
 148                 .chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT,
 149                 .controller_data = &ad1836_spi_chip_info,
 150         },
 151 #endif
 152
 153 #if defined(CONFIG_AD9960) || defined(CONFIG_AD9960_MODULE)
 154         {
 155                 .modalias = "ad9960-spi",
 156                 .max_speed_hz = 10000000,     /* max spi clock (SCK) speed in HZ */
 157                 .bus_num = 0,
 158                 .chip_select = 1,
 159                 .controller_data = &ad9960_spi_chip_info,
 160         },
 161 #endif
 162
 163 #if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
 164         {
 165                 .modalias = "mmc_spi",
 166                 .max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
 167                 .bus_num = 0,
 168                 .chip_select = 5,
 169                 .controller_data = &mmc_spi_chip_info,
 170                 .mode = SPI_MODE_3,
 171         },
 172 #endif
 173 };
 174
 175 /* SPI (0) */
 176 static struct resource bfin_spi0_resource[] = {
 177         [0] = {
 178                 .start = SPI0_REGBASE,
 179                 .end   = SPI0_REGBASE + 0xFF,
 180                 .flags = IORESOURCE_MEM,
 181                 },
 182         [1] = {
 183                 .start = CH_SPI,
 184                 .end   = CH_SPI,
 185                 .flags = IORESOURCE_DMA,
 186         },
 187         [2] = {
 188                 .start = IRQ_SPI,
 189                 .end   = IRQ_SPI,
 190                 .flags = IORESOURCE_IRQ,
 191         }
 192 };
 193
 194 /* SPI controller data */
 195 static struct bfin5xx_spi_master bfin_spi0_info = {
 196         .num_chipselect = 8,
 197         .enable_dma = 1,  /* master has the ability to do dma transfer */
 198         .pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0},
 199 };
 200
 201 static struct platform_device bfin_spi0_device = {
 202         .name = "bfin-spi",
 203         .id = 0, /* Bus number */
 204         .num_resources = ARRAY_SIZE(bfin_spi0_resource),
 205         .resource = bfin_spi0_resource,
 206         .dev = {
 207                 .platform_data = &bfin_spi0_info, /* Passed to driver */
 208         },
 209 };
 210 #endif  /* spi master and devices */
 211
 212 #if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
 213 static struct platform_device rtc_device = {
 214         .name = "rtc-bfin",
 215         .id   = -1,
 216 };
 217 #endif
 218
 219 #if defined(CONFIG_FB_HITACHI_TX09) || defined(CONFIG_FB_HITACHI_TX09_MODULE)
 220 static struct platform_device hitachi_fb_device = {
 221         .name = "hitachi-tx09",
 222 };
 223 #endif
 224
 225 #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
 226 static struct resource smc91x_resources[] = {
 227         {
 228                 .start = 0x20200300,
 229                 .end = 0x20200300 + 16,
 230                 .flags = IORESOURCE_MEM,
 231         }, {
 232                 .start = IRQ_PF14,
 233                 .end = IRQ_PF14,
 234                 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
 235                 },
 236 };
 237
 238 static struct platform_device smc91x_device = {
 239         .name = "smc91x",
 240         .id = 0,
 241         .num_resources = ARRAY_SIZE(smc91x_resources),
 242         .resource = smc91x_resources,
 243 };
 244 #endif
 245
 246 #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
 247 static struct resource isp1362_hcd_resources[] = {
 248         {
 249                 .start = 0x20308000,
 250                 .end = 0x20308000,
 251                 .flags = IORESOURCE_MEM,
 252         }, {
 253                 .start = 0x20308004,
 254                 .end = 0x20308004,
 255                 .flags = IORESOURCE_MEM,
 256         }, {
 257                 .start = IRQ_PG15,
 258                 .end = IRQ_PG15,
 259                 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
 260         },
 261 };
 262
 263 static struct isp1362_platform_data isp1362_priv = {
 264         .sel15Kres = 1,
 265         .clknotstop = 0,
 266         .oc_enable = 0,
 267         .int_act_high = 0,
 268         .int_edge_triggered = 0,
 269         .remote_wakeup_connected = 0,
 270         .no_power_switching = 1,
 271         .power_switching_mode = 0,
 272 };
 273
 274 static struct platform_device isp1362_hcd_device = {
 275         .name = "isp1362-hcd",
 276         .id = 0,
 277         .dev = {
 278                 .platform_data = &isp1362_priv,
 279         },
 280         .num_resources = ARRAY_SIZE(isp1362_hcd_resources),
 281         .resource = isp1362_hcd_resources,
 282 };
 283 #endif
 284
 285 #if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
 286 static struct resource net2272_bfin_resources[] = {
 287         {
 288                 .start = 0x20200000,
 289                 .end = 0x20200000 + 0x100,
 290                 .flags = IORESOURCE_MEM,
 291         }, {
 292                 .start = IRQ_PH14,
 293                 .end = IRQ_PH14,
 294                 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
 295         },
 296 };
 297
 298 static struct platform_device net2272_bfin_device = {
 299         .name = "net2272",
 300         .id = -1,
 301         .num_resources = ARRAY_SIZE(net2272_bfin_resources),
 302         .resource = net2272_bfin_resources,
 303 };
 304 #endif
 305
 306 static struct resource bfin_gpios_resources = {
 307         .start = 0,
 308         .end   = MAX_BLACKFIN_GPIOS - 1,
 309         .flags = IORESOURCE_IRQ,
 310 };
 311
 312 static struct platform_device bfin_gpios_device = {
 313         .name = "simple-gpio",
 314         .id = -1,
 315         .num_resources = 1,
 316         .resource = &bfin_gpios_resources,
 317 };
 318
 319 #if defined(CONFIG_MTD_GPIO_ADDR) || defined(CONFIG_MTD_GPIO_ADDR_MODULE)
 320 static struct mtd_partition cm_partitions[] = {
 321         {
 322                 .name   = "bootloader(nor)",
 323                 .size   = 0x40000,
 324                 .offset = 0,
 325         }, {
 326                 .name   = "linux kernel(nor)",
 327                 .size   = 0xE0000,
 328                 .offset = MTDPART_OFS_APPEND,
 329         }, {
 330                 .name   = "file system(nor)",
 331                 .size   = MTDPART_SIZ_FULL,
 332                 .offset = MTDPART_OFS_APPEND,
 333         }
 334 };
 335
 336 static struct physmap_flash_data cm_flash_data = {
 337         .width    = 2,
 338         .parts    = cm_partitions,
 339         .nr_parts = ARRAY_SIZE(cm_partitions),
 340 };
 341
 342 static unsigned cm_flash_gpios[] = { GPIO_PF4, GPIO_PF5 };
 343
 344 static struct resource cm_flash_resource[] = {
 345         {
 346                 .name  = "cfi_probe",
 347                 .start = 0x20000000,
 348                 .end   = 0x201fffff,
 349                 .flags = IORESOURCE_MEM,
 350         }, {
 351                 .start = (unsigned long)cm_flash_gpios,
 352                 .end   = ARRAY_SIZE(cm_flash_gpios),
 353                 .flags = IORESOURCE_IRQ,
 354         }
 355 };
 356
 357 static struct platform_device cm_flash_device = {
 358         .name          = "gpio-addr-flash",
 359         .id            = 0,
 360         .dev = {
 361                 .platform_data = &cm_flash_data,
 362         },
 363         .num_resources = ARRAY_SIZE(cm_flash_resource),
 364         .resource      = cm_flash_resource,
 365 };
 366 #endif
 367
 368 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
 369 static struct resource bfin_uart_resources[] = {
 370         {
 371                 .start = 0xFFC00400,
 372                 .end = 0xFFC004FF,
 373                 .flags = IORESOURCE_MEM,
 374         }, {
 375                 .start = 0xFFC02000,
 376                 .end = 0xFFC020FF,
 377                 .flags = IORESOURCE_MEM,
 378         },
 379 };
 380
 381 static struct platform_device bfin_uart_device = {
 382         .name = "bfin-uart",
 383         .id = 1,
 384         .num_resources = ARRAY_SIZE(bfin_uart_resources),
 385         .resource = bfin_uart_resources,
 386 };
 387 #endif
 388
 389 #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
 390 #ifdef CONFIG_BFIN_SIR0
 391 static struct resource bfin_sir0_resources[] = {
 392         {
 393                 .start = 0xFFC00400,
 394                 .end = 0xFFC004FF,
 395                 .flags = IORESOURCE_MEM,
 396         },
 397         {
 398                 .start = IRQ_UART0_RX,
 399                 .end = IRQ_UART0_RX+1,
 400                 .flags = IORESOURCE_IRQ,
 401         },
 402         {
 403                 .start = CH_UART0_RX,
 404                 .end = CH_UART0_RX+1,
 405                 .flags = IORESOURCE_DMA,
 406         },
 407 };
 408
 409 static struct platform_device bfin_sir0_device = {
 410         .name = "bfin_sir",
 411         .id = 0,
 412         .num_resources = ARRAY_SIZE(bfin_sir0_resources),
 413         .resource = bfin_sir0_resources,
 414 };
 415 #endif
 416 #ifdef CONFIG_BFIN_SIR1
 417 static struct resource bfin_sir1_resources[] = {
 418         {
 419                 .start = 0xFFC02000,
 420                 .end = 0xFFC020FF,
 421                 .flags = IORESOURCE_MEM,
 422         },
 423         {
 424                 .start = IRQ_UART1_RX,
 425                 .end = IRQ_UART1_RX+1,
 426                 .flags = IORESOURCE_IRQ,
 427         },
 428         {
 429                 .start = CH_UART1_RX,
 430                 .end = CH_UART1_RX+1,
 431                 .flags = IORESOURCE_DMA,
 432         },
 433 };
 434
 435 static struct platform_device bfin_sir1_device = {
 436         .name = "bfin_sir",
 437         .id = 1,
 438         .num_resources = ARRAY_SIZE(bfin_sir1_resources),
 439         .resource = bfin_sir1_resources,
 440 };
 441 #endif
 442 #endif
 443
 444 #if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
 445 static struct resource bfin_twi0_resource[] = {
 446         [0] = {
 447                 .start = TWI0_REGBASE,
 448                 .end   = TWI0_REGBASE,
 449                 .flags = IORESOURCE_MEM,
 450         },
 451         [1] = {
 452                 .start = IRQ_TWI,
 453                 .end   = IRQ_TWI,
 454                 .flags = IORESOURCE_IRQ,
 455         },
 456 };
 457
 458 static struct platform_device i2c_bfin_twi_device = {
 459         .name = "i2c-bfin-twi",
 460         .id = 0,
 461         .num_resources = ARRAY_SIZE(bfin_twi0_resource),
 462         .resource = bfin_twi0_resource,
 463 };
 464 #endif
 465
 466 #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
 467 static struct platform_device bfin_sport0_uart_device = {
 468         .name = "bfin-sport-uart",
 469         .id = 0,
 470 };
 471
 472 static struct platform_device bfin_sport1_uart_device = {
 473         .name = "bfin-sport-uart",
 474         .id = 1,
 475 };
 476 #endif
 477
 478 #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
 479 static struct platform_device bfin_mii_bus = {
 480         .name = "bfin_mii_bus",
 481 };
 482
 483 static struct platform_device bfin_mac_device = {
 484         .name = "bfin_mac",
 485         .dev.platform_data = &bfin_mii_bus,
 486 };
 487 #endif
 488
 489 #if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
 490 #define PATA_INT        IRQ_PF14
 491
 492 static struct pata_platform_info bfin_pata_platform_data = {
 493         .ioport_shift = 2,
 494         .irq_type = IRQF_TRIGGER_HIGH | IRQF_DISABLED,
 495 };
 496
 497 static struct resource bfin_pata_resources[] = {
 498         {
 499                 .start = 0x2030C000,
 500                 .end = 0x2030C01F,
 501                 .flags = IORESOURCE_MEM,
 502         },
 503         {
 504                 .start = 0x2030D018,
 505                 .end = 0x2030D01B,
 506                 .flags = IORESOURCE_MEM,
 507         },
 508         {
 509                 .start = PATA_INT,
 510                 .end = PATA_INT,
 511                 .flags = IORESOURCE_IRQ,
 512         },
 513 };
 514
 515 static struct platform_device bfin_pata_device = {
 516         .name = "pata_platform",
 517         .id = -1,
 518         .num_resources = ARRAY_SIZE(bfin_pata_resources),
 519         .resource = bfin_pata_resources,
 520         .dev = {
 521                 .platform_data = &bfin_pata_platform_data,
 522         }
 523 };
 524 #endif
 525
 526 static const unsigned int cclk_vlev_datasheet[] =
 527 {
 528         VRPAIR(VLEV_085, 250000000),
 529         VRPAIR(VLEV_090, 376000000),
 530         VRPAIR(VLEV_095, 426000000),
 531         VRPAIR(VLEV_100, 426000000),
 532         VRPAIR(VLEV_105, 476000000),
 533         VRPAIR(VLEV_110, 476000000),
 534         VRPAIR(VLEV_115, 476000000),
 535         VRPAIR(VLEV_120, 500000000),
 536         VRPAIR(VLEV_125, 533000000),
 537         VRPAIR(VLEV_130, 600000000),
 538 };
 539
 540 static struct bfin_dpmc_platform_data bfin_dmpc_vreg_data = {
 541         .tuple_tab = cclk_vlev_datasheet,
 542         .tabsize = ARRAY_SIZE(cclk_vlev_datasheet),
 543         .vr_settling_time = 25 /* us */,
 544 };
 545
 546 static struct platform_device bfin_dpmc = {
 547         .name = "bfin dpmc",
 548         .dev = {
 549                 .platform_data = &bfin_dmpc_vreg_data,
 550         },
 551 };
 552
 553 static struct platform_device *cm_bf537_devices[] __initdata = {
 554
 555         &bfin_dpmc,
 556
 557 #if defined(CONFIG_FB_HITACHI_TX09) || defined(CONFIG_FB_HITACHI_TX09_MODULE)
 558         &hitachi_fb_device,
 559 #endif
 560
 561 #if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
 562         &rtc_device,
 563 #endif
 564
 565 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
 566         &bfin_uart_device,
 567 #endif
 568
 569 #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
 570 #ifdef CONFIG_BFIN_SIR0
 571         &bfin_sir0_device,
 572 #endif
 573 #ifdef CONFIG_BFIN_SIR1
 574         &bfin_sir1_device,
 575 #endif
 576 #endif
 577
 578 #if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
 579         &i2c_bfin_twi_device,
 580 #endif
 581
 582 #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
 583         &bfin_sport0_uart_device,
 584         &bfin_sport1_uart_device,
 585 #endif
 586
 587 #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
 588         &isp1362_hcd_device,
 589 #endif
 590
 591 #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
 592         &smc91x_device,
 593 #endif
 594
 595 #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
 596         &bfin_mii_bus,
 597         &bfin_mac_device,
 598 #endif
 599
 600 #if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
 601         &net2272_bfin_device,
 602 #endif
 603
 604 #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
 605         &bfin_spi0_device,
 606 #endif
 607
 608 #if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
 609         &bfin_pata_device,
 610 #endif
 611
 612 #if defined(CONFIG_MTD_GPIO_ADDR) || defined(CONFIG_MTD_GPIO_ADDR_MODULE)
 613         &cm_flash_device,
 614 #endif
 615
 616         &bfin_gpios_device,
 617 };
 618
 619 static int __init tcm_bf537_init(void)
 620 {
 621         printk(KERN_INFO "%s(): registering device resources\n", __func__);
 622         platform_add_devices(cm_bf537_devices, ARRAY_SIZE(cm_bf537_devices));
 623 #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
 624         spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
 625 #endif
 626
 627 #if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
 628         irq_desc[PATA_INT].status |= IRQ_NOAUTOEN;
 629 #endif
 630         return 0;
 631 }
 632
 633 arch_initcall(tcm_bf537_init);
 634
 635 void bfin_get_ether_addr(char *addr)
 636 {
 637         random_ether_addr(addr);
 638         printk(KERN_WARNING "%s:%s: Setting Ethernet MAC to a random one\n", __FILE__, __func__);
 639 }
 640 EXPORT_SYMBOL(bfin_get_ether_addr);