2 * File: arch/blackfin/mach-bf537/boards/stamp.c
3 * Based on: arch/blackfin/mach-bf533/boards/ezkit.c
4 * Author: Aidan Williams <aidan@nicta.com.au>
10 * Copyright 2005 National ICT Australia (NICTA)
11 * Copyright 2004-2006 Analog Devices Inc.
13 * Bugs: Enter bugs at http://blackfin.uclinux.org/
15 * This program is free software; you can redistribute it and/or modify
16 * it under the terms of the GNU General Public License as published by
17 * the Free Software Foundation; either version 2 of the License, or
18 * (at your option) any later version.
20 * This program is distributed in the hope that it will be useful,
21 * but WITHOUT ANY WARRANTY; without even the implied warranty of
22 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
23 * GNU General Public License for more details.
25 * You should have received a copy of the GNU General Public License
26 * along with this program; if not, see the file COPYING, or write
27 * to the Free Software Foundation, Inc.,
28 * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
31 #include <linux/device.h>
32 #include <linux/kernel.h>
33 #include <linux/platform_device.h>
34 #include <linux/mtd/mtd.h>
35 #include <linux/mtd/nand.h>
36 #include <linux/mtd/partitions.h>
37 #include <linux/mtd/plat-ram.h>
38 #include <linux/mtd/physmap.h>
39 #include <linux/spi/spi.h>
40 #include <linux/spi/flash.h>
41 #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
42 #include <linux/usb/isp1362.h>
44 #include <linux/ata_platform.h>
45 #include <linux/irq.h>
46 #include <linux/interrupt.h>
47 #include <linux/i2c.h>
48 #include <linux/usb/sl811.h>
49 #include <linux/spi/mmc_spi.h>
51 #include <asm/bfin5xx_spi.h>
52 #include <asm/reboot.h>
53 #include <asm/portmux.h>
57 * Name the Board for the /proc/cpuinfo
59 const char bfin_board_name
[] = "ADI BF537-STAMP";
62 * Driver needs to know address, irq and flag pin.
65 #if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE)
66 #include <linux/usb/isp1760.h>
67 static struct resource bfin_isp1760_resources
[] = {
70 .end
= 0x203C0000 + 0x000fffff,
71 .flags
= IORESOURCE_MEM
,
76 .flags
= IORESOURCE_IRQ
| IORESOURCE_IRQ_LOWLEVEL
,
80 static struct isp1760_platform_data isp1760_priv
= {
85 .dack_polarity_high
= 0,
86 .dreq_polarity_high
= 0,
89 static struct platform_device bfin_isp1760_device
= {
90 .name
= "isp1760-hcd",
93 .platform_data
= &isp1760_priv
,
95 .num_resources
= ARRAY_SIZE(bfin_isp1760_resources
),
96 .resource
= bfin_isp1760_resources
,
100 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
101 #include <linux/input.h>
102 #include <linux/gpio_keys.h>
104 static struct gpio_keys_button bfin_gpio_keys_table
[] = {
105 {BTN_0
, GPIO_PF2
, 1, "gpio-keys: BTN0"},
106 {BTN_1
, GPIO_PF3
, 1, "gpio-keys: BTN1"},
107 {BTN_2
, GPIO_PF4
, 1, "gpio-keys: BTN2"},
108 {BTN_3
, GPIO_PF5
, 1, "gpio-keys: BTN3"},
111 static struct gpio_keys_platform_data bfin_gpio_keys_data
= {
112 .buttons
= bfin_gpio_keys_table
,
113 .nbuttons
= ARRAY_SIZE(bfin_gpio_keys_table
),
116 static struct platform_device bfin_device_gpiokeys
= {
119 .platform_data
= &bfin_gpio_keys_data
,
124 static struct resource bfin_gpios_resources
= {
126 .end
= MAX_BLACKFIN_GPIOS
- 1,
127 .flags
= IORESOURCE_IRQ
,
130 static struct platform_device bfin_gpios_device
= {
131 .name
= "simple-gpio",
134 .resource
= &bfin_gpios_resources
,
137 #if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE)
138 static struct resource bfin_pcmcia_cf_resources
[] = {
140 .start
= 0x20310000, /* IO PORT */
142 .flags
= IORESOURCE_MEM
,
144 .start
= 0x20311000, /* Attribute Memory */
146 .flags
= IORESOURCE_MEM
,
150 .flags
= IORESOURCE_IRQ
| IORESOURCE_IRQ_LOWLEVEL
,
152 .start
= 6, /* Card Detect PF6 */
154 .flags
= IORESOURCE_IRQ
,
158 static struct platform_device bfin_pcmcia_cf_device
= {
159 .name
= "bfin_cf_pcmcia",
161 .num_resources
= ARRAY_SIZE(bfin_pcmcia_cf_resources
),
162 .resource
= bfin_pcmcia_cf_resources
,
166 #if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
167 static struct platform_device rtc_device
= {
173 #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
174 static struct resource smc91x_resources
[] = {
176 .name
= "smc91x-regs",
178 .end
= 0x20300300 + 16,
179 .flags
= IORESOURCE_MEM
,
184 .flags
= IORESOURCE_IRQ
| IORESOURCE_IRQ_HIGHLEVEL
,
187 static struct platform_device smc91x_device
= {
190 .num_resources
= ARRAY_SIZE(smc91x_resources
),
191 .resource
= smc91x_resources
,
195 #if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
196 static struct resource dm9000_resources
[] = {
199 .end
= 0x203FB800 + 8,
200 .flags
= IORESOURCE_MEM
,
205 .flags
= (IORESOURCE_IRQ
| IORESOURCE_IRQ_HIGHEDGE
),
209 static struct platform_device dm9000_device
= {
212 .num_resources
= ARRAY_SIZE(dm9000_resources
),
213 .resource
= dm9000_resources
,
217 #if defined(CONFIG_AX88180) || defined(CONFIG_AX88180_MODULE)
218 static struct resource ax88180_resources
[] = {
221 .end
= 0x20300000 + 0x8000,
222 .flags
= IORESOURCE_MEM
,
227 .flags
= (IORESOURCE_IRQ
| IORESOURCE_IRQ_LOWLEVEL
),
231 static struct platform_device ax88180_device
= {
234 .num_resources
= ARRAY_SIZE(ax88180_resources
),
235 .resource
= ax88180_resources
,
239 #if defined(CONFIG_USB_SL811_HCD) || defined(CONFIG_USB_SL811_HCD_MODULE)
240 static struct resource sl811_hcd_resources
[] = {
244 .flags
= IORESOURCE_MEM
,
248 .flags
= IORESOURCE_MEM
,
250 .start
= CONFIG_USB_SL811_BFIN_IRQ
,
251 .end
= CONFIG_USB_SL811_BFIN_IRQ
,
252 .flags
= IORESOURCE_IRQ
| IORESOURCE_IRQ_HIGHLEVEL
,
256 #if defined(CONFIG_USB_SL811_BFIN_USE_VBUS)
257 void sl811_port_power(struct device
*dev
, int is_on
)
259 gpio_request(CONFIG_USB_SL811_BFIN_GPIO_VBUS
, "usb:SL811_VBUS");
260 gpio_direction_output(CONFIG_USB_SL811_BFIN_GPIO_VBUS
, is_on
);
264 static struct sl811_platform_data sl811_priv
= {
266 .power
= 250, /* == 500mA */
267 #if defined(CONFIG_USB_SL811_BFIN_USE_VBUS)
268 .port_power
= &sl811_port_power
,
272 static struct platform_device sl811_hcd_device
= {
276 .platform_data
= &sl811_priv
,
278 .num_resources
= ARRAY_SIZE(sl811_hcd_resources
),
279 .resource
= sl811_hcd_resources
,
283 #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
284 static struct resource isp1362_hcd_resources
[] = {
288 .flags
= IORESOURCE_MEM
,
292 .flags
= IORESOURCE_MEM
,
294 .start
= CONFIG_USB_ISP1362_BFIN_GPIO_IRQ
,
295 .end
= CONFIG_USB_ISP1362_BFIN_GPIO_IRQ
,
296 .flags
= IORESOURCE_IRQ
| IORESOURCE_IRQ_HIGHLEVEL
,
300 static struct isp1362_platform_data isp1362_priv
= {
305 .int_edge_triggered
= 0,
306 .remote_wakeup_connected
= 0,
307 .no_power_switching
= 1,
308 .power_switching_mode
= 0,
311 static struct platform_device isp1362_hcd_device
= {
312 .name
= "isp1362-hcd",
315 .platform_data
= &isp1362_priv
,
317 .num_resources
= ARRAY_SIZE(isp1362_hcd_resources
),
318 .resource
= isp1362_hcd_resources
,
322 #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
323 static struct platform_device bfin_mii_bus
= {
324 .name
= "bfin_mii_bus",
327 static struct platform_device bfin_mac_device
= {
329 .dev
.platform_data
= &bfin_mii_bus
,
333 #if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
334 static struct resource net2272_bfin_resources
[] = {
337 .end
= 0x20300000 + 0x100,
338 .flags
= IORESOURCE_MEM
,
342 .flags
= IORESOURCE_IRQ
| IORESOURCE_IRQ_HIGHLEVEL
,
346 static struct platform_device net2272_bfin_device
= {
349 .num_resources
= ARRAY_SIZE(net2272_bfin_resources
),
350 .resource
= net2272_bfin_resources
,
354 #if defined(CONFIG_MTD_NAND_PLATFORM) || defined(CONFIG_MTD_NAND_PLATFORM_MODULE)
355 #ifdef CONFIG_MTD_PARTITIONS
356 const char *part_probes
[] = { "cmdlinepart", "RedBoot", NULL
};
358 static struct mtd_partition bfin_plat_nand_partitions
[] = {
360 .name
= "linux kernel(nand)",
364 .name
= "file system(nand)",
365 .size
= MTDPART_SIZ_FULL
,
366 .offset
= MTDPART_OFS_APPEND
,
371 #define BFIN_NAND_PLAT_CLE 2
372 #define BFIN_NAND_PLAT_ALE 1
373 static void bfin_plat_nand_cmd_ctrl(struct mtd_info
*mtd
, int cmd
, unsigned int ctrl
)
375 struct nand_chip
*this = mtd
->priv
;
377 if (cmd
== NAND_CMD_NONE
)
381 writeb(cmd
, this->IO_ADDR_W
+ (1 << BFIN_NAND_PLAT_CLE
));
383 writeb(cmd
, this->IO_ADDR_W
+ (1 << BFIN_NAND_PLAT_ALE
));
386 #define BFIN_NAND_PLAT_READY GPIO_PF3
387 static int bfin_plat_nand_dev_ready(struct mtd_info
*mtd
)
389 return gpio_get_value(BFIN_NAND_PLAT_READY
);
392 static struct platform_nand_data bfin_plat_nand_data
= {
395 #ifdef CONFIG_MTD_PARTITIONS
396 .part_probe_types
= part_probes
,
397 .partitions
= bfin_plat_nand_partitions
,
398 .nr_partitions
= ARRAY_SIZE(bfin_plat_nand_partitions
),
402 .cmd_ctrl
= bfin_plat_nand_cmd_ctrl
,
403 .dev_ready
= bfin_plat_nand_dev_ready
,
407 #define MAX(x, y) (x > y ? x : y)
408 static struct resource bfin_plat_nand_resources
= {
410 .end
= 0x20212000 + (1 << MAX(BFIN_NAND_PLAT_CLE
, BFIN_NAND_PLAT_ALE
)),
411 .flags
= IORESOURCE_IO
,
414 static struct platform_device bfin_async_nand_device
= {
418 .resource
= &bfin_plat_nand_resources
,
420 .platform_data
= &bfin_plat_nand_data
,
424 static void bfin_plat_nand_init(void)
426 gpio_request(BFIN_NAND_PLAT_READY
, "bfin_nand_plat");
429 static void bfin_plat_nand_init(void) {}
432 #if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
433 static struct mtd_partition stamp_partitions
[] = {
435 .name
= "bootloader(nor)",
439 .name
= "linux kernel(nor)",
441 .offset
= MTDPART_OFS_APPEND
,
443 .name
= "file system(nor)",
444 .size
= 0x400000 - 0x40000 - 0x180000 - 0x10000,
445 .offset
= MTDPART_OFS_APPEND
,
447 .name
= "MAC Address(nor)",
448 .size
= MTDPART_SIZ_FULL
,
450 .mask_flags
= MTD_WRITEABLE
,
454 static struct physmap_flash_data stamp_flash_data
= {
456 .parts
= stamp_partitions
,
457 .nr_parts
= ARRAY_SIZE(stamp_partitions
),
460 static struct resource stamp_flash_resource
= {
463 .flags
= IORESOURCE_MEM
,
466 static struct platform_device stamp_flash_device
= {
467 .name
= "physmap-flash",
470 .platform_data
= &stamp_flash_data
,
473 .resource
= &stamp_flash_resource
,
477 #if defined(CONFIG_MTD_M25P80) \
478 || defined(CONFIG_MTD_M25P80_MODULE)
479 static struct mtd_partition bfin_spi_flash_partitions
[] = {
481 .name
= "bootloader(spi)",
484 .mask_flags
= MTD_CAP_ROM
486 .name
= "linux kernel(spi)",
488 .offset
= MTDPART_OFS_APPEND
,
490 .name
= "file system(spi)",
491 .size
= MTDPART_SIZ_FULL
,
492 .offset
= MTDPART_OFS_APPEND
,
496 static struct flash_platform_data bfin_spi_flash_data
= {
498 .parts
= bfin_spi_flash_partitions
,
499 .nr_parts
= ARRAY_SIZE(bfin_spi_flash_partitions
),
500 /* .type = "m25p64", */
503 /* SPI flash chip (m25p64) */
504 static struct bfin5xx_spi_chip spi_flash_chip_info
= {
505 .enable_dma
= 0, /* use dma transfer with this chip*/
510 #if defined(CONFIG_BFIN_SPI_ADC) \
511 || defined(CONFIG_BFIN_SPI_ADC_MODULE)
513 static struct bfin5xx_spi_chip spi_adc_chip_info
= {
514 .enable_dma
= 1, /* use dma transfer with this chip*/
519 #if defined(CONFIG_SND_BLACKFIN_AD1836) \
520 || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
521 static struct bfin5xx_spi_chip ad1836_spi_chip_info
= {
527 #if defined(CONFIG_SND_BF5XX_SOC_AD1938) \
528 || defined(CONFIG_SND_BF5XX_SOC_AD1938_MODULE)
529 static struct bfin5xx_spi_chip ad1938_spi_chip_info
= {
536 #if defined(CONFIG_AD9960) || defined(CONFIG_AD9960_MODULE)
537 static struct bfin5xx_spi_chip ad9960_spi_chip_info
= {
543 #if defined(CONFIG_INPUT_EVAL_AD7147EBZ)
544 #include <linux/input.h>
545 #include <linux/input/ad714x.h>
546 static struct bfin5xx_spi_chip ad7147_spi_chip_info
= {
551 static struct ad714x_slider_plat slider_plat
[] = {
559 static struct ad714x_button_plat button_plat
[] = {
561 .keycode
= BTN_FORWARD
,
571 .keycode
= BTN_MIDDLE
,
576 .keycode
= BTN_RIGHT
,
586 static struct ad714x_platform_data ad7147_platfrom_data
= {
589 .slider
= slider_plat
,
590 .button
= button_plat
,
592 {0xFBFF, 0x1FFF, 0, 0x2626, 1600, 1600, 1600, 1600},
593 {0xEFFF, 0x1FFF, 0, 0x2626, 1650, 1650, 1650, 1650},
594 {0xFFFF, 0x1FFE, 0, 0x2626, 1650, 1650, 1650, 1650},
595 {0xFFFF, 0x1FFB, 0, 0x2626, 1650, 1650, 1650, 1650},
596 {0xFFFF, 0x1FEF, 0, 0x2626, 1650, 1650, 1650, 1650},
597 {0xFFFF, 0x1FBF, 0, 0x2626, 1650, 1650, 1650, 1650},
598 {0xFFFF, 0x1EFF, 0, 0x2626, 1650, 1650, 1650, 1650},
599 {0xFFFF, 0x1BFF, 0, 0x2626, 1600, 1600, 1600, 1600},
600 {0xFF7B, 0x3FFF, 0x506, 0x2626, 1100, 1100, 1150, 1150},
601 {0xFDFE, 0x3FFF, 0x606, 0x2626, 1100, 1100, 1150, 1150},
602 {0xFEBA, 0x1FFF, 0x1400, 0x2626, 1200, 1200, 1300, 1300},
603 {0xFFEF, 0x1FFF, 0x0, 0x2626, 1100, 1100, 1150, 1150},
605 .sys_cfg_reg
= {0x2B2, 0x0, 0x3233, 0x819, 0x832, 0xCFF, 0xCFF, 0x0},
609 #if defined(CONFIG_INPUT_EVAL_AD7142EB)
610 #include <linux/input.h>
611 #include <linux/input/ad714x.h>
612 static struct ad714x_button_plat button_plat
[] = {
634 static struct ad714x_platform_data ad7142_platfrom_data
= {
636 .button
= button_plat
,
638 /* fixme: figure out right setting for all comoponent according
639 * to hardware feature of EVAL-AD7142EB board */
640 {0xE7FF, 0x3FFF, 0x0005, 0x2626, 0x01F4, 0x01F4, 0x028A, 0x028A},
641 {0xFDBF, 0x3FFF, 0x0001, 0x2626, 0x01F4, 0x01F4, 0x028A, 0x028A},
642 {0xFFFF, 0x2DFF, 0x0001, 0x2626, 0x01F4, 0x01F4, 0x028A, 0x028A},
643 {0xFFFF, 0x37BF, 0x0001, 0x2626, 0x01F4, 0x01F4, 0x028A, 0x028A},
644 {0xFFFF, 0x3FFF, 0x0000, 0x0606, 0x01F4, 0x01F4, 0x0320, 0x0320},
645 {0xFFFF, 0x3FFF, 0x0000, 0x0606, 0x01F4, 0x01F4, 0x0320, 0x0320},
646 {0xFFFF, 0x3FFF, 0x0000, 0x0606, 0x01F4, 0x01F4, 0x0320, 0x0320},
647 {0xFFFF, 0x3FFF, 0x0000, 0x0606, 0x01F4, 0x01F4, 0x0320, 0x0320},
648 {0xFFFF, 0x3FFF, 0x0000, 0x0606, 0x01F4, 0x01F4, 0x0320, 0x0320},
649 {0xFFFF, 0x3FFF, 0x0000, 0x0606, 0x01F4, 0x01F4, 0x0320, 0x0320},
650 {0xFFFF, 0x3FFF, 0x0000, 0x0606, 0x01F4, 0x01F4, 0x0320, 0x0320},
651 {0xFFFF, 0x3FFF, 0x0000, 0x0606, 0x01F4, 0x01F4, 0x0320, 0x0320},
653 .sys_cfg_reg
= {0x0B2, 0x0, 0x690, 0x664, 0x290F, 0xF, 0xF, 0x0},
657 #if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
658 #define MMC_SPI_CARD_DETECT_INT IRQ_PF5
660 static int bfin_mmc_spi_init(struct device
*dev
,
661 irqreturn_t (*detect_int
)(int, void *), void *data
)
663 return request_irq(MMC_SPI_CARD_DETECT_INT
, detect_int
,
664 IRQF_TRIGGER_FALLING
, "mmc-spi-detect", data
);
667 static void bfin_mmc_spi_exit(struct device
*dev
, void *data
)
669 free_irq(MMC_SPI_CARD_DETECT_INT
, data
);
672 static struct mmc_spi_platform_data bfin_mmc_spi_pdata
= {
673 .init
= bfin_mmc_spi_init
,
674 .exit
= bfin_mmc_spi_exit
,
675 .detect_delay
= 100, /* msecs */
678 static struct bfin5xx_spi_chip mmc_spi_chip_info
= {
685 #if defined(CONFIG_PBX)
686 static struct bfin5xx_spi_chip spi_si3xxx_chip_info
= {
687 .ctl_reg
= 0x4, /* send zero */
690 .cs_change_per_word
= 1,
694 #if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
695 #include <linux/spi/ad7877.h>
696 static struct bfin5xx_spi_chip spi_ad7877_chip_info
= {
701 static const struct ad7877_platform_data bfin_ad7877_ts_info
= {
703 .vref_delay_usecs
= 50, /* internal, no capacitor */
706 .pressure_max
= 1000,
708 .stopacq_polarity
= 1,
709 .first_conversion_delay
= 3,
710 .acquisition_time
= 1,
712 .pen_down_acc_interval
= 1,
716 #if defined(CONFIG_TOUCHSCREEN_AD7879) || defined(CONFIG_TOUCHSCREEN_AD7879_MODULE)
717 #include <linux/spi/ad7879.h>
718 static const struct ad7879_platform_data bfin_ad7879_ts_info
= {
719 .model
= 7879, /* Model = AD7879 */
720 .x_plate_ohms
= 620, /* 620 Ohm from the touch datasheet */
721 .pressure_max
= 10000,
723 .first_conversion_delay
= 3, /* wait 512us before do a first conversion */
724 .acquisition_time
= 1, /* 4us acquisition time per sample */
725 .median
= 2, /* do 8 measurements */
726 .averaging
= 1, /* take the average of 4 middle samples */
727 .pen_down_acc_interval
= 255, /* 9.4 ms */
728 .gpio_output
= 1, /* configure AUX/VBAT/GPIO as GPIO output */
729 .gpio_default
= 1, /* During initialization set GPIO = HIGH */
733 #if defined(CONFIG_INPUT_ADXL34X) || defined(CONFIG_INPUT_ADXL34X_MODULE)
734 #include <linux/input.h>
735 #include <linux/spi/adxl34x.h>
736 static const struct adxl34x_platform_data adxl34x_info
= {
740 .tap_threshold
= 0x31,
741 .tap_duration
= 0x10,
744 .tap_axis_control
= ADXL_TAP_X_EN
| ADXL_TAP_Y_EN
| ADXL_TAP_Z_EN
,
745 .act_axis_control
= 0xFF,
746 .activity_threshold
= 5,
747 .inactivity_threshold
= 3,
748 .inactivity_time
= 4,
749 .free_fall_threshold
= 0x7,
750 .free_fall_time
= 0x20,
752 .data_range
= ADXL_FULL_RES
,
755 .ev_code_x
= ABS_X
, /* EV_REL */
756 .ev_code_y
= ABS_Y
, /* EV_REL */
757 .ev_code_z
= ABS_Z
, /* EV_REL */
759 .ev_code_tap_x
= BTN_TOUCH
, /* EV_KEY */
760 .ev_code_tap_y
= BTN_TOUCH
, /* EV_KEY */
761 .ev_code_tap_z
= BTN_TOUCH
, /* EV_KEY */
763 /* .ev_code_ff = KEY_F,*/ /* EV_KEY */
764 /* .ev_code_act_inactivity = KEY_A,*/ /* EV_KEY */
765 .power_mode
= ADXL_AUTO_SLEEP
| ADXL_LINK
,
766 .fifo_mode
= ADXL_FIFO_STREAM
,
770 #if defined(CONFIG_TOUCHSCREEN_AD7879_SPI) || defined(CONFIG_TOUCHSCREEN_AD7879_SPI_MODULE)
771 static struct bfin5xx_spi_chip spi_ad7879_chip_info
= {
777 #if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
778 static struct bfin5xx_spi_chip spidev_chip_info
= {
784 #if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE)
785 static struct bfin5xx_spi_chip lq035q1_spi_chip_info
= {
791 #if defined(CONFIG_ENC28J60) || defined(CONFIG_ENC28J60_MODULE)
792 static struct bfin5xx_spi_chip enc28j60_spi_chip_info
= {
795 .cs_gpio
= GPIO_PF10
,
799 #if defined(CONFIG_MTD_DATAFLASH) \
800 || defined(CONFIG_MTD_DATAFLASH_MODULE)
802 static struct mtd_partition bfin_spi_dataflash_partitions
[] = {
804 .name
= "bootloader(spi)",
807 .mask_flags
= MTD_CAP_ROM
809 .name
= "linux kernel(spi)",
811 .offset
= MTDPART_OFS_APPEND
,
813 .name
= "file system(spi)",
814 .size
= MTDPART_SIZ_FULL
,
815 .offset
= MTDPART_OFS_APPEND
,
819 static struct flash_platform_data bfin_spi_dataflash_data
= {
820 .name
= "SPI Dataflash",
821 .parts
= bfin_spi_dataflash_partitions
,
822 .nr_parts
= ARRAY_SIZE(bfin_spi_dataflash_partitions
),
826 static struct bfin5xx_spi_chip data_flash_chip_info
= {
827 .enable_dma
= 0, /* use dma transfer with this chip*/
832 static struct spi_board_info bfin_spi_board_info
[] __initdata
= {
833 #if defined(CONFIG_MTD_M25P80) \
834 || defined(CONFIG_MTD_M25P80_MODULE)
836 /* the modalias must be the same as spi device driver name */
837 .modalias
= "m25p80", /* Name of spi_driver for this device */
838 .max_speed_hz
= 25000000, /* max spi clock (SCK) speed in HZ */
839 .bus_num
= 0, /* Framework bus number */
840 .chip_select
= 1, /* Framework chip select. On STAMP537 it is SPISSEL1*/
841 .platform_data
= &bfin_spi_flash_data
,
842 .controller_data
= &spi_flash_chip_info
,
846 #if defined(CONFIG_MTD_DATAFLASH) \
847 || defined(CONFIG_MTD_DATAFLASH_MODULE)
848 { /* DataFlash chip */
849 .modalias
= "mtd_dataflash",
850 .max_speed_hz
= 33250000, /* max spi clock (SCK) speed in HZ */
851 .bus_num
= 0, /* Framework bus number */
852 .chip_select
= 1, /* Framework chip select. On STAMP537 it is SPISSEL1*/
853 .platform_data
= &bfin_spi_dataflash_data
,
854 .controller_data
= &data_flash_chip_info
,
858 #if defined(CONFIG_BFIN_SPI_ADC) \
859 || defined(CONFIG_BFIN_SPI_ADC_MODULE)
861 .modalias
= "bfin_spi_adc", /* Name of spi_driver for this device */
862 .max_speed_hz
= 6250000, /* max spi clock (SCK) speed in HZ */
863 .bus_num
= 0, /* Framework bus number */
864 .chip_select
= 1, /* Framework chip select. */
865 .platform_data
= NULL
, /* No spi_driver specific config */
866 .controller_data
= &spi_adc_chip_info
,
870 #if defined(CONFIG_SND_BLACKFIN_AD1836) \
871 || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
873 .modalias
= "ad1836-spi",
874 .max_speed_hz
= 3125000, /* max spi clock (SCK) speed in HZ */
876 .chip_select
= CONFIG_SND_BLACKFIN_SPI_PFBIT
,
877 .controller_data
= &ad1836_spi_chip_info
,
881 #if defined(CONFIG_SND_BF5XX_SOC_AD1938) || defined(CONFIG_SND_BF5XX_SOC_AD1938_MODULE)
883 .modalias
= "ad1938-spi",
884 .max_speed_hz
= 3125000, /* max spi clock (SCK) speed in HZ */
886 .chip_select
= 0,/* CONFIG_SND_BLACKFIN_SPI_PFBIT */
887 .controller_data
= &ad1938_spi_chip_info
,
892 #if defined(CONFIG_AD9960) || defined(CONFIG_AD9960_MODULE)
894 .modalias
= "ad9960-spi",
895 .max_speed_hz
= 10000000, /* max spi clock (SCK) speed in HZ */
898 .controller_data
= &ad9960_spi_chip_info
,
902 #if defined(CONFIG_INPUT_EVAL_AD7147EBZ)
904 .modalias
= "ad714x_captouch",
905 .max_speed_hz
= 1000000, /* max spi clock (SCK) speed in HZ */
910 .platform_data
= &ad7147_platfrom_data
,
911 .controller_data
= &ad7147_spi_chip_info
,
915 #if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
917 .modalias
= "mmc_spi",
918 .max_speed_hz
= 20000000, /* max spi clock (SCK) speed in HZ */
921 .platform_data
= &bfin_mmc_spi_pdata
,
922 .controller_data
= &mmc_spi_chip_info
,
926 #if defined(CONFIG_PBX)
928 .modalias
= "fxs-spi",
929 .max_speed_hz
= 12500000, /* max spi clock (SCK) speed in HZ */
931 .chip_select
= 8 - CONFIG_J11_JUMPER
,
932 .controller_data
= &spi_si3xxx_chip_info
,
936 .modalias
= "fxo-spi",
937 .max_speed_hz
= 12500000, /* max spi clock (SCK) speed in HZ */
939 .chip_select
= 8 - CONFIG_J19_JUMPER
,
940 .controller_data
= &spi_si3xxx_chip_info
,
944 #if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
946 .modalias
= "ad7877",
947 .platform_data
= &bfin_ad7877_ts_info
,
949 .max_speed_hz
= 12500000, /* max spi clock (SCK) speed in HZ */
952 .controller_data
= &spi_ad7877_chip_info
,
955 #if defined(CONFIG_TOUCHSCREEN_AD7879_SPI) || defined(CONFIG_TOUCHSCREEN_AD7879_SPI_MODULE)
957 .modalias
= "ad7879",
958 .platform_data
= &bfin_ad7879_ts_info
,
960 .max_speed_hz
= 5000000, /* max spi clock (SCK) speed in HZ */
963 .controller_data
= &spi_ad7879_chip_info
,
964 .mode
= SPI_CPHA
| SPI_CPOL
,
967 #if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
969 .modalias
= "spidev",
970 .max_speed_hz
= 3125000, /* max spi clock (SCK) speed in HZ */
973 .controller_data
= &spidev_chip_info
,
976 #if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE)
978 .modalias
= "bfin-lq035q1-spi",
979 .max_speed_hz
= 20000000, /* max spi clock (SCK) speed in HZ */
982 .controller_data
= &lq035q1_spi_chip_info
,
983 .mode
= SPI_CPHA
| SPI_CPOL
,
986 #if defined(CONFIG_ENC28J60) || defined(CONFIG_ENC28J60_MODULE)
988 .modalias
= "enc28j60",
989 .max_speed_hz
= 20000000, /* max spi clock (SCK) speed in HZ */
992 .chip_select
= 0, /* GPIO controlled SSEL */
993 .controller_data
= &enc28j60_spi_chip_info
,
999 #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
1000 /* SPI controller data */
1001 static struct bfin5xx_spi_master bfin_spi0_info
= {
1002 .num_chipselect
= 8,
1003 .enable_dma
= 1, /* master has the ability to do dma transfer */
1004 .pin_req
= {P_SPI0_SCK
, P_SPI0_MISO
, P_SPI0_MOSI
, 0},
1008 static struct resource bfin_spi0_resource
[] = {
1010 .start
= SPI0_REGBASE
,
1011 .end
= SPI0_REGBASE
+ 0xFF,
1012 .flags
= IORESOURCE_MEM
,
1017 .flags
= IORESOURCE_DMA
,
1022 .flags
= IORESOURCE_IRQ
,
1026 static struct platform_device bfin_spi0_device
= {
1028 .id
= 0, /* Bus number */
1029 .num_resources
= ARRAY_SIZE(bfin_spi0_resource
),
1030 .resource
= bfin_spi0_resource
,
1032 .platform_data
= &bfin_spi0_info
, /* Passed to driver */
1035 #endif /* spi master and devices */
1037 #if defined(CONFIG_SPI_BFIN_SPORT) || defined(CONFIG_SPI_BFIN_SPORT_MODULE)
1039 /* SPORT SPI controller data */
1040 static struct bfin5xx_spi_master bfin_sport_spi0_info
= {
1041 .num_chipselect
= 1, /* master only supports one device */
1042 .enable_dma
= 0, /* master don't support DMA */
1043 .pin_req
= {P_SPORT0_DTPRI
, P_SPORT0_TSCLK
, P_SPORT0_DRPRI
,
1044 P_SPORT0_RSCLK
, P_SPORT0_TFS
, P_SPORT0_RFS
, 0},
1047 static struct resource bfin_sport_spi0_resource
[] = {
1049 .start
= SPORT0_TCR1
,
1050 .end
= SPORT0_TCR1
+ 0xFF,
1051 .flags
= IORESOURCE_MEM
,
1054 .start
= IRQ_SPORT0_ERROR
,
1055 .end
= IRQ_SPORT0_ERROR
,
1056 .flags
= IORESOURCE_IRQ
,
1060 static struct platform_device bfin_sport_spi0_device
= {
1061 .name
= "bfin-sport-spi",
1062 .id
= 1, /* Bus number */
1063 .num_resources
= ARRAY_SIZE(bfin_sport_spi0_resource
),
1064 .resource
= bfin_sport_spi0_resource
,
1066 .platform_data
= &bfin_sport_spi0_info
, /* Passed to driver */
1070 static struct bfin5xx_spi_master bfin_sport_spi1_info
= {
1071 .num_chipselect
= 1, /* master only supports one device */
1072 .enable_dma
= 0, /* master don't support DMA */
1073 .pin_req
= {P_SPORT1_DTPRI
, P_SPORT1_TSCLK
, P_SPORT1_DRPRI
,
1074 P_SPORT1_RSCLK
, P_SPORT1_TFS
, P_SPORT1_RFS
, 0},
1077 static struct resource bfin_sport_spi1_resource
[] = {
1079 .start
= SPORT1_TCR1
,
1080 .end
= SPORT1_TCR1
+ 0xFF,
1081 .flags
= IORESOURCE_MEM
,
1084 .start
= IRQ_SPORT1_ERROR
,
1085 .end
= IRQ_SPORT1_ERROR
,
1086 .flags
= IORESOURCE_IRQ
,
1090 static struct platform_device bfin_sport_spi1_device
= {
1091 .name
= "bfin-sport-spi",
1092 .id
= 2, /* Bus number */
1093 .num_resources
= ARRAY_SIZE(bfin_sport_spi1_resource
),
1094 .resource
= bfin_sport_spi1_resource
,
1096 .platform_data
= &bfin_sport_spi1_info
, /* Passed to driver */
1100 #endif /* sport spi master and devices */
1102 #if defined(CONFIG_FB_BF537_LQ035) || defined(CONFIG_FB_BF537_LQ035_MODULE)
1103 static struct platform_device bfin_fb_device
= {
1104 .name
= "bf537-lq035",
1108 #if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE)
1109 static struct platform_device bfin_fb_adv7393_device
= {
1110 .name
= "bfin-adv7393",
1114 #if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE)
1115 #include <asm/bfin-lq035q1.h>
1117 static struct bfin_lq035q1fb_disp_info bfin_lq035q1_data
= {
1118 .mode
= LQ035_NORM
| LQ035_RGB
| LQ035_RL
| LQ035_TB
,
1119 .use_bl
= 0, /* let something else control the LCD Blacklight */
1120 .gpio_bl
= GPIO_PF7
,
1123 static struct resource bfin_lq035q1_resources
[] = {
1125 .start
= IRQ_PPI_ERROR
,
1126 .end
= IRQ_PPI_ERROR
,
1127 .flags
= IORESOURCE_IRQ
,
1131 static struct platform_device bfin_lq035q1_device
= {
1132 .name
= "bfin-lq035q1",
1134 .num_resources
= ARRAY_SIZE(bfin_lq035q1_resources
),
1135 .resource
= bfin_lq035q1_resources
,
1137 .platform_data
= &bfin_lq035q1_data
,
1142 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
1143 static struct resource bfin_uart_resources
[] = {
1144 #ifdef CONFIG_SERIAL_BFIN_UART0
1146 .start
= 0xFFC00400,
1148 .flags
= IORESOURCE_MEM
,
1151 #ifdef CONFIG_SERIAL_BFIN_UART1
1153 .start
= 0xFFC02000,
1155 .flags
= IORESOURCE_MEM
,
1160 static struct platform_device bfin_uart_device
= {
1161 .name
= "bfin-uart",
1163 .num_resources
= ARRAY_SIZE(bfin_uart_resources
),
1164 .resource
= bfin_uart_resources
,
1168 #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
1169 #ifdef CONFIG_BFIN_SIR0
1170 static struct resource bfin_sir0_resources
[] = {
1172 .start
= 0xFFC00400,
1174 .flags
= IORESOURCE_MEM
,
1177 .start
= IRQ_UART0_RX
,
1178 .end
= IRQ_UART0_RX
+1,
1179 .flags
= IORESOURCE_IRQ
,
1182 .start
= CH_UART0_RX
,
1183 .end
= CH_UART0_RX
+1,
1184 .flags
= IORESOURCE_DMA
,
1188 static struct platform_device bfin_sir0_device
= {
1191 .num_resources
= ARRAY_SIZE(bfin_sir0_resources
),
1192 .resource
= bfin_sir0_resources
,
1195 #ifdef CONFIG_BFIN_SIR1
1196 static struct resource bfin_sir1_resources
[] = {
1198 .start
= 0xFFC02000,
1200 .flags
= IORESOURCE_MEM
,
1203 .start
= IRQ_UART1_RX
,
1204 .end
= IRQ_UART1_RX
+1,
1205 .flags
= IORESOURCE_IRQ
,
1208 .start
= CH_UART1_RX
,
1209 .end
= CH_UART1_RX
+1,
1210 .flags
= IORESOURCE_DMA
,
1214 static struct platform_device bfin_sir1_device
= {
1217 .num_resources
= ARRAY_SIZE(bfin_sir1_resources
),
1218 .resource
= bfin_sir1_resources
,
1223 #if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
1224 static struct resource bfin_twi0_resource
[] = {
1226 .start
= TWI0_REGBASE
,
1227 .end
= TWI0_REGBASE
,
1228 .flags
= IORESOURCE_MEM
,
1233 .flags
= IORESOURCE_IRQ
,
1237 static struct platform_device i2c_bfin_twi_device
= {
1238 .name
= "i2c-bfin-twi",
1240 .num_resources
= ARRAY_SIZE(bfin_twi0_resource
),
1241 .resource
= bfin_twi0_resource
,
1245 #if defined(CONFIG_KEYBOARD_ADP5588) || defined(CONFIG_KEYBOARD_ADP5588_MODULE)
1246 #include <linux/input.h>
1247 #include <linux/i2c/adp5588.h>
1248 static const unsigned short adp5588_keymap
[ADP5588_KEYMAPSIZE
] = {
1262 [13] = KEY_BACKSLASH
,
1274 [26] = KEY_LEFTBRACE
,
1275 [27] = KEY_RIGHTBRACE
,
1288 [41] = KEY_SEMICOLON
,
1289 [42] = KEY_APOSTROPHE
,
1290 [43] = KEY_BACKSLASH
,
1310 [65] = KEY_BACKSPACE
,
1323 static struct adp5588_kpad_platform_data adp5588_kpad_data
= {
1326 .keymap
= adp5588_keymap
,
1327 .keymapsize
= ARRAY_SIZE(adp5588_keymap
),
1332 #if defined(CONFIG_PMIC_ADP5520) || defined(CONFIG_PMIC_ADP5520_MODULE)
1333 #include <linux/mfd/adp5520.h>
1336 * ADP5520/5501 Backlight Data
1339 static struct adp5520_backlight_platfrom_data adp5520_backlight_data
= {
1340 .fade_in
= FADE_T_1200ms
,
1341 .fade_out
= FADE_T_1200ms
,
1342 .fade_led_law
= BL_LAW_LINEAR
,
1344 .abml_filt
= BL_AMBL_FILT_640ms
,
1345 .l1_daylight_max
= BL_CUR_mA(15),
1346 .l1_daylight_dim
= BL_CUR_mA(0),
1347 .l2_office_max
= BL_CUR_mA(7),
1348 .l2_office_dim
= BL_CUR_mA(0),
1349 .l3_dark_max
= BL_CUR_mA(3),
1350 .l3_dark_dim
= BL_CUR_mA(0),
1351 .l2_trip
= L2_COMP_CURR_uA(700),
1352 .l2_hyst
= L2_COMP_CURR_uA(50),
1353 .l3_trip
= L3_COMP_CURR_uA(80),
1354 .l3_hyst
= L3_COMP_CURR_uA(20),
1358 * ADP5520/5501 LEDs Data
1361 #include <linux/leds.h>
1363 static struct led_info adp5520_leds
[] = {
1365 .name
= "adp5520-led1",
1366 .default_trigger
= "none",
1367 .flags
= FLAG_ID_ADP5520_LED1_ADP5501_LED0
| LED_OFFT_600ms
,
1369 #ifdef ADP5520_EN_ALL_LEDS
1371 .name
= "adp5520-led2",
1372 .default_trigger
= "none",
1373 .flags
= FLAG_ID_ADP5520_LED2_ADP5501_LED1
,
1376 .name
= "adp5520-led3",
1377 .default_trigger
= "none",
1378 .flags
= FLAG_ID_ADP5520_LED3_ADP5501_LED2
,
1383 static struct adp5520_leds_platfrom_data adp5520_leds_data
= {
1384 .num_leds
= ARRAY_SIZE(adp5520_leds
),
1385 .leds
= adp5520_leds
,
1386 .fade_in
= FADE_T_600ms
,
1387 .fade_out
= FADE_T_600ms
,
1388 .led_on_time
= LED_ONT_600ms
,
1395 static struct adp5520_gpio_platfrom_data adp5520_gpio_data
= {
1397 .gpio_en_mask
= GPIO_C1
| GPIO_C2
| GPIO_R2
,
1398 .gpio_pullup_mask
= GPIO_C1
| GPIO_C2
| GPIO_R2
,
1402 * ADP5520 Keypad Data
1405 #include <linux/input.h>
1406 static const unsigned short adp5520_keymap
[ADP5520_KEYMAPSIZE
] = {
1407 [KEY(0, 0)] = KEY_GRAVE
,
1408 [KEY(0, 1)] = KEY_1
,
1409 [KEY(0, 2)] = KEY_2
,
1410 [KEY(0, 3)] = KEY_3
,
1411 [KEY(1, 0)] = KEY_4
,
1412 [KEY(1, 1)] = KEY_5
,
1413 [KEY(1, 2)] = KEY_6
,
1414 [KEY(1, 3)] = KEY_7
,
1415 [KEY(2, 0)] = KEY_8
,
1416 [KEY(2, 1)] = KEY_9
,
1417 [KEY(2, 2)] = KEY_0
,
1418 [KEY(2, 3)] = KEY_MINUS
,
1419 [KEY(3, 0)] = KEY_EQUAL
,
1420 [KEY(3, 1)] = KEY_BACKSLASH
,
1421 [KEY(3, 2)] = KEY_BACKSPACE
,
1422 [KEY(3, 3)] = KEY_ENTER
,
1425 static struct adp5520_keys_platfrom_data adp5520_keys_data
= {
1426 .rows_en_mask
= ROW_R3
| ROW_R2
| ROW_R1
| ROW_R0
,
1427 .cols_en_mask
= COL_C3
| COL_C2
| COL_C1
| COL_C0
,
1428 .keymap
= adp5520_keymap
,
1429 .keymapsize
= ARRAY_SIZE(adp5520_keymap
),
1434 * ADP5520/5501 Multifuction Device Init Data
1437 static struct adp5520_subdev_info adp5520_subdevs
[] = {
1439 .name
= "adp5520-backlight",
1441 .platform_data
= &adp5520_backlight_data
,
1444 .name
= "adp5520-led",
1446 .platform_data
= &adp5520_leds_data
,
1449 .name
= "adp5520-gpio",
1451 .platform_data
= &adp5520_gpio_data
,
1454 .name
= "adp5520-keys",
1456 .platform_data
= &adp5520_keys_data
,
1460 static struct adp5520_platform_data adp5520_pdev_data
= {
1461 .num_subdevs
= ARRAY_SIZE(adp5520_subdevs
),
1462 .subdevs
= adp5520_subdevs
,
1467 static struct i2c_board_info __initdata bfin_i2c_board_info
[] = {
1468 #if defined(CONFIG_INPUT_EVAL_AD7142EB)
1470 I2C_BOARD_INFO("ad7142_captouch", 0x2C),
1472 .platform_data
= (void *)&ad7142_platfrom_data
,
1475 #if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE)
1477 I2C_BOARD_INFO("pcf8574_lcd", 0x22),
1480 #if defined(CONFIG_INPUT_PCF8574) || defined(CONFIG_INPUT_PCF8574_MODULE)
1482 I2C_BOARD_INFO("pcf8574_keypad", 0x27),
1486 #if defined(CONFIG_TOUCHSCREEN_AD7879_I2C) || defined(CONFIG_TOUCHSCREEN_AD7879_I2C_MODULE)
1488 I2C_BOARD_INFO("ad7879", 0x2F),
1490 .platform_data
= (void *)&bfin_ad7879_ts_info
,
1493 #if defined(CONFIG_KEYBOARD_ADP5588) || defined(CONFIG_KEYBOARD_ADP5588_MODULE)
1495 I2C_BOARD_INFO("adp5588-keys", 0x34),
1497 .platform_data
= (void *)&adp5588_kpad_data
,
1500 #if defined(CONFIG_PMIC_ADP5520) || defined(CONFIG_PMIC_ADP5520_MODULE)
1502 I2C_BOARD_INFO("pmic-adp5520", 0x32),
1504 .platform_data
= (void *)&adp5520_pdev_data
,
1507 #if defined(CONFIG_INPUT_ADXL34X_I2C) || defined(CONFIG_INPUT_ADXL34X_I2C_MODULE)
1509 I2C_BOARD_INFO("adxl34x", 0x53),
1511 .platform_data
= (void *)&adxl34x_info
,
1516 #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
1517 static struct platform_device bfin_sport0_uart_device
= {
1518 .name
= "bfin-sport-uart",
1522 static struct platform_device bfin_sport1_uart_device
= {
1523 .name
= "bfin-sport-uart",
1528 #if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
1529 #define CF_IDE_NAND_CARD_USE_HDD_INTERFACE
1530 /* #define CF_IDE_NAND_CARD_USE_CF_IN_COMMON_MEMORY_MODE */
1532 #ifdef CF_IDE_NAND_CARD_USE_HDD_INTERFACE
1533 #define PATA_INT IRQ_PF5
1534 static struct pata_platform_info bfin_pata_platform_data
= {
1536 .irq_flags
= IRQF_TRIGGER_HIGH
| IRQF_DISABLED
,
1539 static struct resource bfin_pata_resources
[] = {
1541 .start
= 0x20314020,
1543 .flags
= IORESOURCE_MEM
,
1546 .start
= 0x2031401C,
1548 .flags
= IORESOURCE_MEM
,
1553 .flags
= IORESOURCE_IRQ
,
1556 #elif defined(CF_IDE_NAND_CARD_USE_CF_IN_COMMON_MEMORY_MODE)
1557 static struct pata_platform_info bfin_pata_platform_data
= {
1560 /* CompactFlash Storage Card Memory Mapped Adressing
1563 static struct resource bfin_pata_resources
[] = {
1565 .start
= 0x20211800,
1567 .flags
= IORESOURCE_MEM
,
1570 .start
= 0x2021180E, /* Device Ctl */
1572 .flags
= IORESOURCE_MEM
,
1577 static struct platform_device bfin_pata_device
= {
1578 .name
= "pata_platform",
1580 .num_resources
= ARRAY_SIZE(bfin_pata_resources
),
1581 .resource
= bfin_pata_resources
,
1583 .platform_data
= &bfin_pata_platform_data
,
1588 static const unsigned int cclk_vlev_datasheet
[] =
1590 VRPAIR(VLEV_085
, 250000000),
1591 VRPAIR(VLEV_090
, 376000000),
1592 VRPAIR(VLEV_095
, 426000000),
1593 VRPAIR(VLEV_100
, 426000000),
1594 VRPAIR(VLEV_105
, 476000000),
1595 VRPAIR(VLEV_110
, 476000000),
1596 VRPAIR(VLEV_115
, 476000000),
1597 VRPAIR(VLEV_120
, 500000000),
1598 VRPAIR(VLEV_125
, 533000000),
1599 VRPAIR(VLEV_130
, 600000000),
1602 static struct bfin_dpmc_platform_data bfin_dmpc_vreg_data
= {
1603 .tuple_tab
= cclk_vlev_datasheet
,
1604 .tabsize
= ARRAY_SIZE(cclk_vlev_datasheet
),
1605 .vr_settling_time
= 25 /* us */,
1608 static struct platform_device bfin_dpmc
= {
1609 .name
= "bfin dpmc",
1611 .platform_data
= &bfin_dmpc_vreg_data
,
1615 static struct platform_device
*stamp_devices
[] __initdata
= {
1619 #if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE)
1620 &bfin_pcmcia_cf_device
,
1623 #if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
1627 #if defined(CONFIG_USB_SL811_HCD) || defined(CONFIG_USB_SL811_HCD_MODULE)
1631 #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
1632 &isp1362_hcd_device
,
1635 #if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE)
1636 &bfin_isp1760_device
,
1639 #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
1643 #if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
1647 #if defined(CONFIG_AX88180) || defined(CONFIG_AX88180_MODULE)
1651 #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
1656 #if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
1657 &net2272_bfin_device
,
1660 #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
1664 #if defined(CONFIG_SPI_BFIN_SPORT) || defined(CONFIG_SPI_BFIN_SPORT_MODULE)
1665 &bfin_sport_spi0_device
,
1666 &bfin_sport_spi1_device
,
1669 #if defined(CONFIG_FB_BF537_LQ035) || defined(CONFIG_FB_BF537_LQ035_MODULE)
1673 #if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE)
1674 &bfin_lq035q1_device
,
1677 #if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE)
1678 &bfin_fb_adv7393_device
,
1681 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
1685 #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
1686 #ifdef CONFIG_BFIN_SIR0
1689 #ifdef CONFIG_BFIN_SIR1
1694 #if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
1695 &i2c_bfin_twi_device
,
1698 #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
1699 &bfin_sport0_uart_device
,
1700 &bfin_sport1_uart_device
,
1703 #if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
1707 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
1708 &bfin_device_gpiokeys
,
1713 #if defined(CONFIG_MTD_NAND_PLATFORM) || defined(CONFIG_MTD_NAND_PLATFORM_MODULE)
1714 &bfin_async_nand_device
,
1717 #if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
1718 &stamp_flash_device
,
1722 static int __init
stamp_init(void)
1724 printk(KERN_INFO
"%s(): registering device resources\n", __func__
);
1725 i2c_register_board_info(0, bfin_i2c_board_info
,
1726 ARRAY_SIZE(bfin_i2c_board_info
));
1727 bfin_plat_nand_init();
1728 platform_add_devices(stamp_devices
, ARRAY_SIZE(stamp_devices
));
1729 spi_register_board_info(bfin_spi_board_info
, ARRAY_SIZE(bfin_spi_board_info
));
1734 arch_initcall(stamp_init
);
1736 void native_machine_restart(char *cmd
)
1738 /* workaround reboot hang when booting from SPI */
1739 if ((bfin_read_SYSCR() & 0x7) == 0x3)
1740 bfin_reset_boot_spi_cs(P_DEFAULT_BOOT_SPI_CS
);
1744 * Currently the MAC address is saved in Flash by U-Boot
1746 #define FLASH_MAC 0x203f0000
1747 void bfin_get_ether_addr(char *addr
)
1749 *(u32
*)(&(addr
[0])) = bfin_read32(FLASH_MAC
);
1750 *(u16
*)(&(addr
[4])) = bfin_read16(FLASH_MAC
+ 4);
1752 EXPORT_SYMBOL(bfin_get_ether_addr
);