ACPI: Disable MWAIT via DMI on broken Compal board
[linux-2.6/linux-2.6-openrd.git] / drivers / usb / core / hcd.h
blobb9de1569b39e792f8de8301b5b3c8b27782100ee
1 /*
2 * Copyright (c) 2001-2002 by David Brownell
4 * This program is free software; you can redistribute it and/or modify it
5 * under the terms of the GNU General Public License as published by the
6 * Free Software Foundation; either version 2 of the License, or (at your
7 * option) any later version.
9 * This program is distributed in the hope that it will be useful, but
10 * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
11 * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
12 * for more details.
14 * You should have received a copy of the GNU General Public License
15 * along with this program; if not, write to the Free Software Foundation,
16 * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
20 #ifdef __KERNEL__
22 #include <linux/rwsem.h>
24 /* This file contains declarations of usbcore internals that are mostly
25 * used or exposed by Host Controller Drivers.
29 * USB Packet IDs (PIDs)
31 #define USB_PID_EXT 0xf0 /* USB 2.0 LPM ECN */
32 #define USB_PID_OUT 0xe1
33 #define USB_PID_ACK 0xd2
34 #define USB_PID_DATA0 0xc3
35 #define USB_PID_PING 0xb4 /* USB 2.0 */
36 #define USB_PID_SOF 0xa5
37 #define USB_PID_NYET 0x96 /* USB 2.0 */
38 #define USB_PID_DATA2 0x87 /* USB 2.0 */
39 #define USB_PID_SPLIT 0x78 /* USB 2.0 */
40 #define USB_PID_IN 0x69
41 #define USB_PID_NAK 0x5a
42 #define USB_PID_DATA1 0x4b
43 #define USB_PID_PREAMBLE 0x3c /* Token mode */
44 #define USB_PID_ERR 0x3c /* USB 2.0: handshake mode */
45 #define USB_PID_SETUP 0x2d
46 #define USB_PID_STALL 0x1e
47 #define USB_PID_MDATA 0x0f /* USB 2.0 */
49 /*-------------------------------------------------------------------------*/
52 * USB Host Controller Driver (usb_hcd) framework
54 * Since "struct usb_bus" is so thin, you can't share much code in it.
55 * This framework is a layer over that, and should be more sharable.
57 * @authorized_default: Specifies if new devices are authorized to
58 * connect by default or they require explicit
59 * user space authorization; this bit is settable
60 * through /sys/class/usb_host/X/authorized_default.
61 * For the rest is RO, so we don't lock to r/w it.
64 /*-------------------------------------------------------------------------*/
66 struct usb_hcd {
69 * housekeeping
71 struct usb_bus self; /* hcd is-a bus */
72 struct kref kref; /* reference counter */
74 const char *product_desc; /* product/vendor string */
75 char irq_descr[24]; /* driver + bus # */
77 struct timer_list rh_timer; /* drives root-hub polling */
78 struct urb *status_urb; /* the current status urb */
79 #ifdef CONFIG_PM
80 struct work_struct wakeup_work; /* for remote wakeup */
81 #endif
84 * hardware info/state
86 const struct hc_driver *driver; /* hw-specific hooks */
88 /* Flags that need to be manipulated atomically */
89 unsigned long flags;
90 #define HCD_FLAG_HW_ACCESSIBLE 0x00000001
91 #define HCD_FLAG_SAW_IRQ 0x00000002
93 unsigned rh_registered:1;/* is root hub registered? */
95 /* The next flag is a stopgap, to be removed when all the HCDs
96 * support the new root-hub polling mechanism. */
97 unsigned uses_new_polling:1;
98 unsigned poll_rh:1; /* poll for rh status? */
99 unsigned poll_pending:1; /* status has changed? */
100 unsigned wireless:1; /* Wireless USB HCD */
101 unsigned authorized_default:1;
102 unsigned has_tt:1; /* Integrated TT in root hub */
104 int irq; /* irq allocated */
105 void __iomem *regs; /* device memory/io */
106 u64 rsrc_start; /* memory/io resource start */
107 u64 rsrc_len; /* memory/io resource length */
108 unsigned power_budget; /* in mA, 0 = no limit */
110 #define HCD_BUFFER_POOLS 4
111 struct dma_pool *pool [HCD_BUFFER_POOLS];
113 int state;
114 # define __ACTIVE 0x01
115 # define __SUSPEND 0x04
116 # define __TRANSIENT 0x80
118 # define HC_STATE_HALT 0
119 # define HC_STATE_RUNNING (__ACTIVE)
120 # define HC_STATE_QUIESCING (__SUSPEND|__TRANSIENT|__ACTIVE)
121 # define HC_STATE_RESUMING (__SUSPEND|__TRANSIENT)
122 # define HC_STATE_SUSPENDED (__SUSPEND)
124 #define HC_IS_RUNNING(state) ((state) & __ACTIVE)
125 #define HC_IS_SUSPENDED(state) ((state) & __SUSPEND)
127 /* more shared queuing code would be good; it should support
128 * smarter scheduling, handle transaction translators, etc;
129 * input size of periodic table to an interrupt scheduler.
130 * (ohci 32, uhci 1024, ehci 256/512/1024).
133 /* The HC driver's private data is stored at the end of
134 * this structure.
136 unsigned long hcd_priv[0]
137 __attribute__ ((aligned(sizeof(unsigned long))));
140 /* 2.4 does this a bit differently ... */
141 static inline struct usb_bus *hcd_to_bus(struct usb_hcd *hcd)
143 return &hcd->self;
146 static inline struct usb_hcd *bus_to_hcd(struct usb_bus *bus)
148 return container_of(bus, struct usb_hcd, self);
151 struct hcd_timeout { /* timeouts we allocate */
152 struct list_head timeout_list;
153 struct timer_list timer;
156 /*-------------------------------------------------------------------------*/
159 struct hc_driver {
160 const char *description; /* "ehci-hcd" etc */
161 const char *product_desc; /* product/vendor string */
162 size_t hcd_priv_size; /* size of private data */
164 /* irq handler */
165 irqreturn_t (*irq) (struct usb_hcd *hcd);
167 int flags;
168 #define HCD_MEMORY 0x0001 /* HC regs use memory (else I/O) */
169 #define HCD_LOCAL_MEM 0x0002 /* HC needs local memory */
170 #define HCD_USB11 0x0010 /* USB 1.1 */
171 #define HCD_USB2 0x0020 /* USB 2.0 */
173 /* called to init HCD and root hub */
174 int (*reset) (struct usb_hcd *hcd);
175 int (*start) (struct usb_hcd *hcd);
177 /* NOTE: these suspend/resume calls relate to the HC as
178 * a whole, not just the root hub; they're for PCI bus glue.
180 /* called after suspending the hub, before entering D3 etc */
181 int (*pci_suspend) (struct usb_hcd *hcd, pm_message_t message);
183 /* called after entering D0 (etc), before resuming the hub */
184 int (*pci_resume) (struct usb_hcd *hcd);
186 /* cleanly make HCD stop writing memory and doing I/O */
187 void (*stop) (struct usb_hcd *hcd);
189 /* shutdown HCD */
190 void (*shutdown) (struct usb_hcd *hcd);
192 /* return current frame number */
193 int (*get_frame_number) (struct usb_hcd *hcd);
195 /* manage i/o requests, device state */
196 int (*urb_enqueue)(struct usb_hcd *hcd,
197 struct urb *urb, gfp_t mem_flags);
198 int (*urb_dequeue)(struct usb_hcd *hcd,
199 struct urb *urb, int status);
201 /* hw synch, freeing endpoint resources that urb_dequeue can't */
202 void (*endpoint_disable)(struct usb_hcd *hcd,
203 struct usb_host_endpoint *ep);
205 /* root hub support */
206 int (*hub_status_data) (struct usb_hcd *hcd, char *buf);
207 int (*hub_control) (struct usb_hcd *hcd,
208 u16 typeReq, u16 wValue, u16 wIndex,
209 char *buf, u16 wLength);
210 int (*bus_suspend)(struct usb_hcd *);
211 int (*bus_resume)(struct usb_hcd *);
212 int (*start_port_reset)(struct usb_hcd *, unsigned port_num);
213 void (*hub_irq_enable)(struct usb_hcd *);
214 /* Needed only if port-change IRQs are level-triggered */
216 /* force handover of high-speed port to full-speed companion */
217 void (*relinquish_port)(struct usb_hcd *, int);
218 /* has a port been handed over to a companion? */
219 int (*port_handed_over)(struct usb_hcd *, int);
222 extern int usb_hcd_link_urb_to_ep(struct usb_hcd *hcd, struct urb *urb);
223 extern int usb_hcd_check_unlink_urb(struct usb_hcd *hcd, struct urb *urb,
224 int status);
225 extern void usb_hcd_unlink_urb_from_ep(struct usb_hcd *hcd, struct urb *urb);
227 extern int usb_hcd_submit_urb(struct urb *urb, gfp_t mem_flags);
228 extern int usb_hcd_unlink_urb(struct urb *urb, int status);
229 extern void usb_hcd_giveback_urb(struct usb_hcd *hcd, struct urb *urb,
230 int status);
231 extern void usb_hcd_flush_endpoint(struct usb_device *udev,
232 struct usb_host_endpoint *ep);
233 extern void usb_hcd_disable_endpoint(struct usb_device *udev,
234 struct usb_host_endpoint *ep);
235 extern int usb_hcd_get_frame_number(struct usb_device *udev);
237 extern struct usb_hcd *usb_create_hcd(const struct hc_driver *driver,
238 struct device *dev, char *bus_name);
239 extern struct usb_hcd *usb_get_hcd(struct usb_hcd *hcd);
240 extern void usb_put_hcd(struct usb_hcd *hcd);
241 extern int usb_add_hcd(struct usb_hcd *hcd,
242 unsigned int irqnum, unsigned long irqflags);
243 extern void usb_remove_hcd(struct usb_hcd *hcd);
245 struct platform_device;
246 extern void usb_hcd_platform_shutdown(struct platform_device *dev);
248 #ifdef CONFIG_PCI
249 struct pci_dev;
250 struct pci_device_id;
251 extern int usb_hcd_pci_probe(struct pci_dev *dev,
252 const struct pci_device_id *id);
253 extern void usb_hcd_pci_remove(struct pci_dev *dev);
255 #ifdef CONFIG_PM
256 extern int usb_hcd_pci_suspend(struct pci_dev *dev, pm_message_t state);
257 extern int usb_hcd_pci_resume(struct pci_dev *dev);
258 #endif /* CONFIG_PM */
260 extern void usb_hcd_pci_shutdown(struct pci_dev *dev);
262 #endif /* CONFIG_PCI */
264 /* pci-ish (pdev null is ok) buffer alloc/mapping support */
265 int hcd_buffer_create(struct usb_hcd *hcd);
266 void hcd_buffer_destroy(struct usb_hcd *hcd);
268 void *hcd_buffer_alloc(struct usb_bus *bus, size_t size,
269 gfp_t mem_flags, dma_addr_t *dma);
270 void hcd_buffer_free(struct usb_bus *bus, size_t size,
271 void *addr, dma_addr_t dma);
273 /* generic bus glue, needed for host controllers that don't use PCI */
274 extern irqreturn_t usb_hcd_irq(int irq, void *__hcd);
276 extern void usb_hc_died(struct usb_hcd *hcd);
277 extern void usb_hcd_poll_rh_status(struct usb_hcd *hcd);
279 /* -------------------------------------------------------------------------- */
281 /* Enumeration is only for the hub driver, or HCD virtual root hubs */
282 extern struct usb_device *usb_alloc_dev(struct usb_device *parent,
283 struct usb_bus *, unsigned port);
284 extern int usb_new_device(struct usb_device *dev);
285 extern void usb_disconnect(struct usb_device **);
287 extern int usb_get_configuration(struct usb_device *dev);
288 extern void usb_destroy_configuration(struct usb_device *dev);
290 /*-------------------------------------------------------------------------*/
293 * HCD Root Hub support
296 #include "hub.h"
298 /* (shifted) direction/type/recipient from the USB 2.0 spec, table 9.2 */
299 #define DeviceRequest \
300 ((USB_DIR_IN|USB_TYPE_STANDARD|USB_RECIP_DEVICE)<<8)
301 #define DeviceOutRequest \
302 ((USB_DIR_OUT|USB_TYPE_STANDARD|USB_RECIP_DEVICE)<<8)
304 #define InterfaceRequest \
305 ((USB_DIR_IN|USB_TYPE_STANDARD|USB_RECIP_INTERFACE)<<8)
307 #define EndpointRequest \
308 ((USB_DIR_IN|USB_TYPE_STANDARD|USB_RECIP_INTERFACE)<<8)
309 #define EndpointOutRequest \
310 ((USB_DIR_OUT|USB_TYPE_STANDARD|USB_RECIP_INTERFACE)<<8)
312 /* class requests from the USB 2.0 hub spec, table 11-15 */
313 /* GetBusState and SetHubDescriptor are optional, omitted */
314 #define ClearHubFeature (0x2000 | USB_REQ_CLEAR_FEATURE)
315 #define ClearPortFeature (0x2300 | USB_REQ_CLEAR_FEATURE)
316 #define GetHubDescriptor (0xa000 | USB_REQ_GET_DESCRIPTOR)
317 #define GetHubStatus (0xa000 | USB_REQ_GET_STATUS)
318 #define GetPortStatus (0xa300 | USB_REQ_GET_STATUS)
319 #define SetHubFeature (0x2000 | USB_REQ_SET_FEATURE)
320 #define SetPortFeature (0x2300 | USB_REQ_SET_FEATURE)
323 /*-------------------------------------------------------------------------*/
326 * Generic bandwidth allocation constants/support
328 #define FRAME_TIME_USECS 1000L
329 #define BitTime(bytecount) (7 * 8 * bytecount / 6) /* with integer truncation */
330 /* Trying not to use worst-case bit-stuffing
331 * of (7/6 * 8 * bytecount) = 9.33 * bytecount */
332 /* bytecount = data payload byte count */
334 #define NS_TO_US(ns) ((ns + 500L) / 1000L)
335 /* convert & round nanoseconds to microseconds */
339 * Full/low speed bandwidth allocation constants/support.
341 #define BW_HOST_DELAY 1000L /* nanoseconds */
342 #define BW_HUB_LS_SETUP 333L /* nanoseconds */
343 /* 4 full-speed bit times (est.) */
345 #define FRAME_TIME_BITS 12000L /* frame = 1 millisecond */
346 #define FRAME_TIME_MAX_BITS_ALLOC (90L * FRAME_TIME_BITS / 100L)
347 #define FRAME_TIME_MAX_USECS_ALLOC (90L * FRAME_TIME_USECS / 100L)
350 * Ceiling [nano/micro]seconds (typical) for that many bytes at high speed
351 * ISO is a bit less, no ACK ... from USB 2.0 spec, 5.11.3 (and needed
352 * to preallocate bandwidth)
354 #define USB2_HOST_DELAY 5 /* nsec, guess */
355 #define HS_NSECS(bytes) (((55 * 8 * 2083) \
356 + (2083UL * (3 + BitTime(bytes))))/1000 \
357 + USB2_HOST_DELAY)
358 #define HS_NSECS_ISO(bytes) (((38 * 8 * 2083) \
359 + (2083UL * (3 + BitTime(bytes))))/1000 \
360 + USB2_HOST_DELAY)
361 #define HS_USECS(bytes) NS_TO_US (HS_NSECS(bytes))
362 #define HS_USECS_ISO(bytes) NS_TO_US (HS_NSECS_ISO(bytes))
364 extern long usb_calc_bus_time(int speed, int is_input,
365 int isoc, int bytecount);
367 /*-------------------------------------------------------------------------*/
369 extern void usb_set_device_state(struct usb_device *udev,
370 enum usb_device_state new_state);
372 /*-------------------------------------------------------------------------*/
374 /* exported only within usbcore */
376 extern struct list_head usb_bus_list;
377 extern struct mutex usb_bus_list_lock;
378 extern wait_queue_head_t usb_kill_urb_queue;
380 extern void usb_enable_root_hub_irq(struct usb_bus *bus);
382 extern int usb_find_interface_driver(struct usb_device *dev,
383 struct usb_interface *interface);
385 #define usb_endpoint_out(ep_dir) (!((ep_dir) & USB_DIR_IN))
387 #ifdef CONFIG_PM
388 extern void usb_hcd_resume_root_hub(struct usb_hcd *hcd);
389 extern void usb_root_hub_lost_power(struct usb_device *rhdev);
390 extern int hcd_bus_suspend(struct usb_device *rhdev);
391 extern int hcd_bus_resume(struct usb_device *rhdev);
392 #else
393 static inline void usb_hcd_resume_root_hub(struct usb_hcd *hcd)
395 return;
397 #endif /* CONFIG_PM */
400 * USB device fs stuff
403 #ifdef CONFIG_USB_DEVICEFS
406 * these are expected to be called from the USB core/hub thread
407 * with the kernel lock held
409 extern void usbfs_update_special(void);
410 extern int usbfs_init(void);
411 extern void usbfs_cleanup(void);
413 #else /* CONFIG_USB_DEVICEFS */
415 static inline void usbfs_update_special(void) {}
416 static inline int usbfs_init(void) { return 0; }
417 static inline void usbfs_cleanup(void) { }
419 #endif /* CONFIG_USB_DEVICEFS */
421 /*-------------------------------------------------------------------------*/
423 #if defined(CONFIG_USB_MON)
425 struct usb_mon_operations {
426 void (*urb_submit)(struct usb_bus *bus, struct urb *urb);
427 void (*urb_submit_error)(struct usb_bus *bus, struct urb *urb, int err);
428 void (*urb_complete)(struct usb_bus *bus, struct urb *urb, int status);
429 /* void (*urb_unlink)(struct usb_bus *bus, struct urb *urb); */
432 extern struct usb_mon_operations *mon_ops;
434 static inline void usbmon_urb_submit(struct usb_bus *bus, struct urb *urb)
436 if (bus->monitored)
437 (*mon_ops->urb_submit)(bus, urb);
440 static inline void usbmon_urb_submit_error(struct usb_bus *bus, struct urb *urb,
441 int error)
443 if (bus->monitored)
444 (*mon_ops->urb_submit_error)(bus, urb, error);
447 static inline void usbmon_urb_complete(struct usb_bus *bus, struct urb *urb,
448 int status)
450 if (bus->monitored)
451 (*mon_ops->urb_complete)(bus, urb, status);
454 int usb_mon_register(struct usb_mon_operations *ops);
455 void usb_mon_deregister(void);
457 #else
459 static inline void usbmon_urb_submit(struct usb_bus *bus, struct urb *urb) {}
460 static inline void usbmon_urb_submit_error(struct usb_bus *bus, struct urb *urb,
461 int error) {}
462 static inline void usbmon_urb_complete(struct usb_bus *bus, struct urb *urb,
463 int status) {}
465 #endif /* CONFIG_USB_MON */
467 /*-------------------------------------------------------------------------*/
469 /* hub.h ... DeviceRemovable in 2.4.2-ac11, gone in 2.4.10 */
470 /* bleech -- resurfaced in 2.4.11 or 2.4.12 */
471 #define bitmap DeviceRemovable
474 /*-------------------------------------------------------------------------*/
476 /* random stuff */
478 #define RUN_CONTEXT (in_irq() ? "in_irq" \
479 : (in_interrupt() ? "in_interrupt" : "can sleep"))
482 /* This rwsem is for use only by the hub driver and ehci-hcd.
483 * Nobody else should touch it.
485 extern struct rw_semaphore ehci_cf_port_reset_rwsem;
487 #endif /* __KERNEL__ */