2 * linux/drivers/pcmcia/soc_common.h
4 * Copyright (C) 2000 John G Dorsey <john+@cs.cmu.edu>
6 * This file contains definitions for the PCMCIA support code common to
7 * integrated SOCs like the SA-11x0 and PXA2xx microprocessors.
9 #ifndef _ASM_ARCH_PCMCIA
10 #define _ASM_ARCH_PCMCIA
12 /* include the world */
13 #include <linux/cpufreq.h>
14 #include <pcmcia/cs_types.h>
15 #include <pcmcia/cs.h>
16 #include <pcmcia/ss.h>
17 #include <pcmcia/cistpl.h>
21 struct pcmcia_low_level
;
24 * This structure encapsulates per-socket state which we might need to
25 * use when responding to a Card Services query of some kind.
27 struct soc_pcmcia_socket
{
28 struct pcmcia_socket socket
;
31 * Info from low level handler
40 struct pcmcia_low_level
*ops
;
43 socket_state_t cs_state
;
45 unsigned short spd_io
[MAX_IO_WIN
];
46 unsigned short spd_mem
[MAX_WIN
];
47 unsigned short spd_attr
[MAX_WIN
];
49 struct resource res_skt
;
50 struct resource res_io
;
51 struct resource res_mem
;
52 struct resource res_attr
;
53 void __iomem
*virt_io
;
55 unsigned int irq_state
;
57 struct timer_list poll_timer
;
58 struct list_head node
;
71 struct pcmcia_low_level
{
74 /* first socket in system */
79 int (*hw_init
)(struct soc_pcmcia_socket
*);
80 void (*hw_shutdown
)(struct soc_pcmcia_socket
*);
82 void (*socket_state
)(struct soc_pcmcia_socket
*, struct pcmcia_state
*);
83 int (*configure_socket
)(struct soc_pcmcia_socket
*, const socket_state_t
*);
86 * Enable card status IRQs on (re-)initialisation. This can
87 * be called at initialisation, power management event, or
90 void (*socket_init
)(struct soc_pcmcia_socket
*);
93 * Disable card status IRQs and PCMCIA bus on suspend.
95 void (*socket_suspend
)(struct soc_pcmcia_socket
*);
98 * Hardware specific timing routines.
99 * If provided, the get_timing routine overrides the SOC default.
101 unsigned int (*get_timing
)(struct soc_pcmcia_socket
*, unsigned int, unsigned int);
102 int (*set_timing
)(struct soc_pcmcia_socket
*);
103 int (*show_timing
)(struct soc_pcmcia_socket
*, char *);
105 #ifdef CONFIG_CPU_FREQ
109 int (*frequency_change
)(struct soc_pcmcia_socket
*, unsigned long, struct cpufreq_freqs
*);
120 struct soc_pcmcia_timing
{
126 extern int soc_pcmcia_request_irqs(struct soc_pcmcia_socket
*skt
, struct pcmcia_irqs
*irqs
, int nr
);
127 extern void soc_pcmcia_free_irqs(struct soc_pcmcia_socket
*skt
, struct pcmcia_irqs
*irqs
, int nr
);
128 extern void soc_pcmcia_disable_irqs(struct soc_pcmcia_socket
*skt
, struct pcmcia_irqs
*irqs
, int nr
);
129 extern void soc_pcmcia_enable_irqs(struct soc_pcmcia_socket
*skt
, struct pcmcia_irqs
*irqs
, int nr
);
130 extern void soc_common_pcmcia_get_timing(struct soc_pcmcia_socket
*, struct soc_pcmcia_timing
*);
133 extern struct list_head soc_pcmcia_sockets
;
135 extern int soc_common_drv_pcmcia_probe(struct device
*dev
, struct pcmcia_low_level
*ops
, int first
, int nr
);
136 extern int soc_common_drv_pcmcia_remove(struct device
*dev
);
139 #ifdef CONFIG_PCMCIA_DEBUG
141 extern void soc_pcmcia_debug(struct soc_pcmcia_socket
*skt
, const char *func
,
142 int lvl
, const char *fmt
, ...);
144 #define debug(skt, lvl, fmt, arg...) \
145 soc_pcmcia_debug(skt, __func__, lvl, fmt , ## arg)
148 #define debug(skt, lvl, fmt, arg...) do { } while (0)
153 * The PC Card Standard, Release 7, section 4.13.4, says that twIORD
154 * has a minimum value of 165ns. Section 4.13.5 says that twIOWR has
155 * a minimum value of 165ns, as well. Section 4.7.2 (describing
156 * common and attribute memory write timing) says that twWE has a
157 * minimum value of 150ns for a 250ns cycle time (for 5V operation;
158 * see section 4.7.4), or 300ns for a 600ns cycle time (for 3.3V
159 * operation, also section 4.7.4). Section 4.7.3 says that taOE
160 * has a maximum value of 150ns for a 300ns cycle time (for 5V
161 * operation), or 300ns for a 600ns cycle time (for 3.3V operation).
163 * When configuring memory maps, Card Services appears to adopt the policy
164 * that a memory access time of "0" means "use the default." The default
165 * PCMCIA I/O command width time is 165ns. The default PCMCIA 5V attribute
166 * and memory command width time is 150ns; the PCMCIA 3.3V attribute and
167 * memory command width time is 300ns.
169 #define SOC_PCMCIA_IO_ACCESS (165)
170 #define SOC_PCMCIA_5V_MEM_ACCESS (150)
171 #define SOC_PCMCIA_3V_MEM_ACCESS (300)
172 #define SOC_PCMCIA_ATTR_MEM_ACCESS (300)
175 * The socket driver actually works nicely in interrupt-driven form,
176 * so the (relatively infrequent) polling is "just to be sure."
178 #define SOC_PCMCIA_POLL_PERIOD (2*HZ)
181 /* I/O pins replacing memory pins
182 * (PCMCIA System Architecture, 2nd ed., by Don Anderson, p.75)
184 * These signals change meaning when going from memory-only to
185 * memory-or-I/O interface:
187 #define iostschg bvd1