arch/arm/mach-at91/board-1arm.c

   1 /*
   2  * linux/arch/arm/mach-at91/board-1arm.c
   3  *
   4  *  Copyright (C) 2005 SAN People
   5  *
   6  * This program is free software; you can redistribute it and/or modify
   7  * it under the terms of the GNU General Public License as published by
   8  * the Free Software Foundation; either version 2 of the License, or
   9  * (at your option) any later version.
  10  *
  11  * This program is distributed in the hope that it will be useful,
  12  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  13  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  14  * GNU General Public License for more details.
  15  *
  16  * You should have received a copy of the GNU General Public License
  17  * along with this program; if not, write to the Free Software
  18  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  19  */
  20
  21 #include <linux/types.h>
  22 #include <linux/init.h>
  23 #include <linux/mm.h>
  24 #include <linux/module.h>
  25 #include <linux/platform_device.h>
  26
  27 #include <mach/hardware.h>
  28 #include <asm/setup.h>
  29 #include <asm/mach-types.h>
  30 #include <asm/irq.h>
  31
  32 #include <asm/mach/arch.h>
  33 #include <asm/mach/map.h>
  34 #include <asm/mach/irq.h>
  35
  36 #include <mach/board.h>
  37 #include <mach/gpio.h>
  38 #include <mach/cpu.h>
  39
  40 #include "generic.h"
  41
  42
  43 static void __init onearm_init_early(void)
  44 {
  45         /* Set cpu type: PQFP */
  46         at91rm9200_set_type(ARCH_REVISON_9200_PQFP);
  47
  48         /* Initialize processor: 18.432 MHz crystal */
  49         at91_initialize(18432000);
  50
  51         /* DBGU on ttyS0. (Rx & Tx only) */
  52         at91_register_uart(0, 0, 0);
  53
  54         /* USART0 on ttyS1 (Rx, Tx, CTS, RTS) */
  55         at91_register_uart(AT91RM9200_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS);
  56
  57         /* USART1 on ttyS2 (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
  58         at91_register_uart(AT91RM9200_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS
  59                            | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
  60                            | ATMEL_UART_RI);
  61
  62         /* set serial console to ttyS0 (ie, DBGU) */
  63         at91_set_serial_console(0);
  64 }
  65
  66 static struct at91_eth_data __initdata onearm_eth_data = {
  67         .phy_irq_pin    = AT91_PIN_PC4,
  68         .is_rmii        = 1,
  69 };
  70
  71 static struct at91_usbh_data __initdata onearm_usbh_data = {
  72         .ports          = 1,
  73 };
  74
  75 static struct at91_udc_data __initdata onearm_udc_data = {
  76         .vbus_pin       = AT91_PIN_PC2,
  77         .pullup_pin     = AT91_PIN_PC3,
  78 };
  79
  80 static void __init onearm_board_init(void)
  81 {
  82         /* Serial */
  83         at91_add_device_serial();
  84         /* Ethernet */
  85         at91_add_device_eth(&onearm_eth_data);
  86         /* USB Host */
  87         at91_add_device_usbh(&onearm_usbh_data);
  88         /* USB Device */
  89         at91_add_device_udc(&onearm_udc_data);
  90 }
  91
  92 MACHINE_START(ONEARM, "Ajeco 1ARM single board computer")
  93         /* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
  94         .timer          = &at91rm9200_timer,
  95         .map_io         = at91_map_io,
  96         .init_early     = onearm_init_early,
  97         .init_irq       = at91_init_irq_default,
  98         .init_machine   = onearm_board_init,
  99 MACHINE_END