1 /************************************************************************
2 * s2io.c: A Linux PCI-X Ethernet driver for Neterion 10GbE Server NIC
3 * Copyright(c) 2002-2005 Neterion Inc.
5 * This software may be used and distributed according to the terms of
6 * the GNU General Public License (GPL), incorporated herein by reference.
7 * Drivers based on or derived from this code fall under the GPL and must
8 * retain the authorship, copyright and license notice. This file is not
9 * a complete program and may only be used when the entire operating
10 * system is licensed under the GPL.
11 * See the file COPYING in this distribution for more information.
14 * Jeff Garzik : For pointing out the improper error condition
15 * check in the s2io_xmit routine and also some
16 * issues in the Tx watch dog function. Also for
17 * patiently answering all those innumerable
18 * questions regaring the 2.6 porting issues.
19 * Stephen Hemminger : Providing proper 2.6 porting mechanism for some
20 * macros available only in 2.6 Kernel.
21 * Francois Romieu : For pointing out all code part that were
22 * deprecated and also styling related comments.
23 * Grant Grundler : For helping me get rid of some Architecture
25 * Christopher Hellwig : Some more 2.6 specific issues in the driver.
27 * The module loadable parameters that are supported by the driver and a brief
28 * explaination of all the variables.
30 * rx_ring_num : This can be used to program the number of receive rings used
32 * rx_ring_sz: This defines the number of receive blocks each ring can have.
33 * This is also an array of size 8.
34 * rx_ring_mode: This defines the operation mode of all 8 rings. The valid
35 * values are 1, 2 and 3.
36 * tx_fifo_num: This defines the number of Tx FIFOs thats used int the driver.
37 * tx_fifo_len: This too is an array of 8. Each element defines the number of
38 * Tx descriptors that can be associated with each corresponding FIFO.
39 * intr_type: This defines the type of interrupt. The values can be 0(INTA),
40 * 1(MSI), 2(MSI_X). Default value is '0(INTA)'
41 * lro: Specifies whether to enable Large Receive Offload (LRO) or not.
42 * Possible values '1' for enable '0' for disable. Default is '0'
43 * lro_max_pkts: This parameter defines maximum number of packets can be
44 * aggregated as a single large packet
45 ************************************************************************/
47 #include <linux/config.h>
48 #include <linux/module.h>
49 #include <linux/types.h>
50 #include <linux/errno.h>
51 #include <linux/ioport.h>
52 #include <linux/pci.h>
53 #include <linux/dma-mapping.h>
54 #include <linux/kernel.h>
55 #include <linux/netdevice.h>
56 #include <linux/etherdevice.h>
57 #include <linux/skbuff.h>
58 #include <linux/init.h>
59 #include <linux/delay.h>
60 #include <linux/stddef.h>
61 #include <linux/ioctl.h>
62 #include <linux/timex.h>
63 #include <linux/sched.h>
64 #include <linux/ethtool.h>
65 #include <linux/workqueue.h>
66 #include <linux/if_vlan.h>
68 #include <linux/tcp.h>
71 #include <asm/system.h>
72 #include <asm/uaccess.h>
74 #include <asm/div64.h>
78 #include "s2io-regs.h"
80 #define DRV_VERSION "2.0.14.2"
82 /* S2io Driver name & version. */
83 static char s2io_driver_name
[] = "Neterion";
84 static char s2io_driver_version
[] = DRV_VERSION
;
86 static int rxd_size
[4] = {32,48,48,64};
87 static int rxd_count
[4] = {127,85,85,63};
89 static inline int RXD_IS_UP2DT(RxD_t
*rxdp
)
93 ret
= ((!(rxdp
->Control_1
& RXD_OWN_XENA
)) &&
94 (GET_RXD_MARKER(rxdp
->Control_2
) != THE_RXD_MARK
));
100 * Cards with following subsystem_id have a link state indication
101 * problem, 600B, 600C, 600D, 640B, 640C and 640D.
102 * macro below identifies these cards given the subsystem_id.
104 #define CARDS_WITH_FAULTY_LINK_INDICATORS(dev_type, subid) \
105 (dev_type == XFRAME_I_DEVICE) ? \
106 ((((subid >= 0x600B) && (subid <= 0x600D)) || \
107 ((subid >= 0x640B) && (subid <= 0x640D))) ? 1 : 0) : 0
109 #define LINK_IS_UP(val64) (!(val64 & (ADAPTER_STATUS_RMAC_REMOTE_FAULT | \
110 ADAPTER_STATUS_RMAC_LOCAL_FAULT)))
111 #define TASKLET_IN_USE test_and_set_bit(0, (&sp->tasklet_status))
114 static inline int rx_buffer_level(nic_t
* sp
, int rxb_size
, int ring
)
116 mac_info_t
*mac_control
;
118 mac_control
= &sp
->mac_control
;
119 if (rxb_size
<= rxd_count
[sp
->rxd_mode
])
121 else if ((mac_control
->rings
[ring
].pkt_cnt
- rxb_size
) > 16)
126 /* Ethtool related variables and Macros. */
127 static char s2io_gstrings
[][ETH_GSTRING_LEN
] = {
128 "Register test\t(offline)",
129 "Eeprom test\t(offline)",
130 "Link test\t(online)",
131 "RLDRAM test\t(offline)",
132 "BIST Test\t(offline)"
135 static char ethtool_stats_keys
[][ETH_GSTRING_LEN
] = {
137 {"tmac_data_octets"},
141 {"tmac_pause_ctrl_frms"},
145 {"tmac_any_err_frms"},
146 {"tmac_ttl_less_fb_octets"},
147 {"tmac_vld_ip_octets"},
155 {"rmac_data_octets"},
156 {"rmac_fcs_err_frms"},
158 {"rmac_vld_mcst_frms"},
159 {"rmac_vld_bcst_frms"},
160 {"rmac_in_rng_len_err_frms"},
161 {"rmac_out_rng_len_err_frms"},
163 {"rmac_pause_ctrl_frms"},
164 {"rmac_unsup_ctrl_frms"},
166 {"rmac_accepted_ucst_frms"},
167 {"rmac_accepted_nucst_frms"},
168 {"rmac_discarded_frms"},
169 {"rmac_drop_events"},
170 {"rmac_ttl_less_fb_octets"},
172 {"rmac_usized_frms"},
173 {"rmac_osized_frms"},
175 {"rmac_jabber_frms"},
176 {"rmac_ttl_64_frms"},
177 {"rmac_ttl_65_127_frms"},
178 {"rmac_ttl_128_255_frms"},
179 {"rmac_ttl_256_511_frms"},
180 {"rmac_ttl_512_1023_frms"},
181 {"rmac_ttl_1024_1518_frms"},
189 {"rmac_err_drp_udp"},
190 {"rmac_xgmii_err_sym"},
208 {"rmac_xgmii_data_err_cnt"},
209 {"rmac_xgmii_ctrl_err_cnt"},
210 {"rmac_accepted_ip"},
214 {"new_rd_req_rtry_cnt"},
216 {"wr_rtry_rd_ack_cnt"},
219 {"new_wr_req_rtry_cnt"},
222 {"rd_rtry_wr_ack_cnt"},
230 {"rmac_ttl_1519_4095_frms"},
231 {"rmac_ttl_4096_8191_frms"},
232 {"rmac_ttl_8192_max_frms"},
233 {"rmac_ttl_gt_max_frms"},
234 {"rmac_osized_alt_frms"},
235 {"rmac_jabber_alt_frms"},
236 {"rmac_gt_max_alt_frms"},
238 {"rmac_len_discard"},
239 {"rmac_fcs_discard"},
242 {"rmac_red_discard"},
243 {"rmac_rts_discard"},
244 {"rmac_ingm_full_discard"},
246 {"\n DRIVER STATISTICS"},
247 {"single_bit_ecc_errs"},
248 {"double_bit_ecc_errs"},
254 ("alarm_transceiver_temp_high"),
255 ("alarm_transceiver_temp_low"),
256 ("alarm_laser_bias_current_high"),
257 ("alarm_laser_bias_current_low"),
258 ("alarm_laser_output_power_high"),
259 ("alarm_laser_output_power_low"),
260 ("warn_transceiver_temp_high"),
261 ("warn_transceiver_temp_low"),
262 ("warn_laser_bias_current_high"),
263 ("warn_laser_bias_current_low"),
264 ("warn_laser_output_power_high"),
265 ("warn_laser_output_power_low"),
266 ("lro_aggregated_pkts"),
267 ("lro_flush_both_count"),
268 ("lro_out_of_sequence_pkts"),
269 ("lro_flush_due_to_max_pkts"),
270 ("lro_avg_aggr_pkts"),
273 #define S2IO_STAT_LEN sizeof(ethtool_stats_keys)/ ETH_GSTRING_LEN
274 #define S2IO_STAT_STRINGS_LEN S2IO_STAT_LEN * ETH_GSTRING_LEN
276 #define S2IO_TEST_LEN sizeof(s2io_gstrings) / ETH_GSTRING_LEN
277 #define S2IO_STRINGS_LEN S2IO_TEST_LEN * ETH_GSTRING_LEN
279 #define S2IO_TIMER_CONF(timer, handle, arg, exp) \
280 init_timer(&timer); \
281 timer.function = handle; \
282 timer.data = (unsigned long) arg; \
283 mod_timer(&timer, (jiffies + exp)) \
286 static void s2io_vlan_rx_register(struct net_device
*dev
,
287 struct vlan_group
*grp
)
289 nic_t
*nic
= dev
->priv
;
292 spin_lock_irqsave(&nic
->tx_lock
, flags
);
294 spin_unlock_irqrestore(&nic
->tx_lock
, flags
);
297 /* Unregister the vlan */
298 static void s2io_vlan_rx_kill_vid(struct net_device
*dev
, unsigned long vid
)
300 nic_t
*nic
= dev
->priv
;
303 spin_lock_irqsave(&nic
->tx_lock
, flags
);
305 nic
->vlgrp
->vlan_devices
[vid
] = NULL
;
306 spin_unlock_irqrestore(&nic
->tx_lock
, flags
);
310 * Constants to be programmed into the Xena's registers, to configure
315 static const u64 herc_act_dtx_cfg
[] = {
317 0x8000051536750000ULL
, 0x80000515367500E0ULL
,
319 0x8000051536750004ULL
, 0x80000515367500E4ULL
,
321 0x80010515003F0000ULL
, 0x80010515003F00E0ULL
,
323 0x80010515003F0004ULL
, 0x80010515003F00E4ULL
,
325 0x801205150D440000ULL
, 0x801205150D4400E0ULL
,
327 0x801205150D440004ULL
, 0x801205150D4400E4ULL
,
329 0x80020515F2100000ULL
, 0x80020515F21000E0ULL
,
331 0x80020515F2100004ULL
, 0x80020515F21000E4ULL
,
336 static const u64 xena_dtx_cfg
[] = {
338 0x8000051500000000ULL
, 0x80000515000000E0ULL
,
340 0x80000515D9350004ULL
, 0x80000515D93500E4ULL
,
342 0x8001051500000000ULL
, 0x80010515000000E0ULL
,
344 0x80010515001E0004ULL
, 0x80010515001E00E4ULL
,
346 0x8002051500000000ULL
, 0x80020515000000E0ULL
,
348 0x80020515F2100004ULL
, 0x80020515F21000E4ULL
,
353 * Constants for Fixing the MacAddress problem seen mostly on
356 static const u64 fix_mac
[] = {
357 0x0060000000000000ULL
, 0x0060600000000000ULL
,
358 0x0040600000000000ULL
, 0x0000600000000000ULL
,
359 0x0020600000000000ULL
, 0x0060600000000000ULL
,
360 0x0020600000000000ULL
, 0x0060600000000000ULL
,
361 0x0020600000000000ULL
, 0x0060600000000000ULL
,
362 0x0020600000000000ULL
, 0x0060600000000000ULL
,
363 0x0020600000000000ULL
, 0x0060600000000000ULL
,
364 0x0020600000000000ULL
, 0x0060600000000000ULL
,
365 0x0020600000000000ULL
, 0x0060600000000000ULL
,
366 0x0020600000000000ULL
, 0x0060600000000000ULL
,
367 0x0020600000000000ULL
, 0x0060600000000000ULL
,
368 0x0020600000000000ULL
, 0x0060600000000000ULL
,
369 0x0020600000000000ULL
, 0x0000600000000000ULL
,
370 0x0040600000000000ULL
, 0x0060600000000000ULL
,
374 /* Module Loadable parameters. */
375 static unsigned int tx_fifo_num
= 1;
376 static unsigned int tx_fifo_len
[MAX_TX_FIFOS
] =
377 {DEFAULT_FIFO_0_LEN
, [1 ...(MAX_TX_FIFOS
- 1)] = DEFAULT_FIFO_1_7_LEN
};
378 static unsigned int rx_ring_num
= 1;
379 static unsigned int rx_ring_sz
[MAX_RX_RINGS
] =
380 {[0 ...(MAX_RX_RINGS
- 1)] = SMALL_BLK_CNT
};
381 static unsigned int rts_frm_len
[MAX_RX_RINGS
] =
382 {[0 ...(MAX_RX_RINGS
- 1)] = 0 };
383 static unsigned int rx_ring_mode
= 1;
384 static unsigned int use_continuous_tx_intrs
= 1;
385 static unsigned int rmac_pause_time
= 0x100;
386 static unsigned int mc_pause_threshold_q0q3
= 187;
387 static unsigned int mc_pause_threshold_q4q7
= 187;
388 static unsigned int shared_splits
;
389 static unsigned int tmac_util_period
= 5;
390 static unsigned int rmac_util_period
= 5;
391 static unsigned int bimodal
= 0;
392 static unsigned int l3l4hdr_size
= 128;
393 #ifndef CONFIG_S2IO_NAPI
394 static unsigned int indicate_max_pkts
;
396 /* Frequency of Rx desc syncs expressed as power of 2 */
397 static unsigned int rxsync_frequency
= 3;
398 /* Interrupt type. Values can be 0(INTA), 1(MSI), 2(MSI_X) */
399 static unsigned int intr_type
= 0;
400 /* Large receive offload feature */
401 static unsigned int lro
= 0;
402 /* Max pkts to be aggregated by LRO at one time. If not specified,
403 * aggregation happens until we hit max IP pkt size(64K)
405 static unsigned int lro_max_pkts
= 0xFFFF;
409 * This table lists all the devices that this driver supports.
411 static struct pci_device_id s2io_tbl
[] __devinitdata
= {
412 {PCI_VENDOR_ID_S2IO
, PCI_DEVICE_ID_S2IO_WIN
,
413 PCI_ANY_ID
, PCI_ANY_ID
},
414 {PCI_VENDOR_ID_S2IO
, PCI_DEVICE_ID_S2IO_UNI
,
415 PCI_ANY_ID
, PCI_ANY_ID
},
416 {PCI_VENDOR_ID_S2IO
, PCI_DEVICE_ID_HERC_WIN
,
417 PCI_ANY_ID
, PCI_ANY_ID
},
418 {PCI_VENDOR_ID_S2IO
, PCI_DEVICE_ID_HERC_UNI
,
419 PCI_ANY_ID
, PCI_ANY_ID
},
423 MODULE_DEVICE_TABLE(pci
, s2io_tbl
);
425 static struct pci_driver s2io_driver
= {
427 .id_table
= s2io_tbl
,
428 .probe
= s2io_init_nic
,
429 .remove
= __devexit_p(s2io_rem_nic
),
432 /* A simplifier macro used both by init and free shared_mem Fns(). */
433 #define TXD_MEM_PAGE_CNT(len, per_each) ((len+per_each - 1) / per_each)
436 * init_shared_mem - Allocation and Initialization of Memory
437 * @nic: Device private variable.
438 * Description: The function allocates all the memory areas shared
439 * between the NIC and the driver. This includes Tx descriptors,
440 * Rx descriptors and the statistics block.
443 static int init_shared_mem(struct s2io_nic
*nic
)
446 void *tmp_v_addr
, *tmp_v_addr_next
;
447 dma_addr_t tmp_p_addr
, tmp_p_addr_next
;
448 RxD_block_t
*pre_rxd_blk
= NULL
;
449 int i
, j
, blk_cnt
, rx_sz
, tx_sz
;
450 int lst_size
, lst_per_page
;
451 struct net_device
*dev
= nic
->dev
;
455 mac_info_t
*mac_control
;
456 struct config_param
*config
;
458 mac_control
= &nic
->mac_control
;
459 config
= &nic
->config
;
462 /* Allocation and initialization of TXDLs in FIOFs */
464 for (i
= 0; i
< config
->tx_fifo_num
; i
++) {
465 size
+= config
->tx_cfg
[i
].fifo_len
;
467 if (size
> MAX_AVAILABLE_TXDS
) {
468 DBG_PRINT(ERR_DBG
, "%s: Requested TxDs too high, ",
470 DBG_PRINT(ERR_DBG
, "Requested: %d, max supported: 8192\n", size
);
474 lst_size
= (sizeof(TxD_t
) * config
->max_txds
);
475 tx_sz
= lst_size
* size
;
476 lst_per_page
= PAGE_SIZE
/ lst_size
;
478 for (i
= 0; i
< config
->tx_fifo_num
; i
++) {
479 int fifo_len
= config
->tx_cfg
[i
].fifo_len
;
480 int list_holder_size
= fifo_len
* sizeof(list_info_hold_t
);
481 mac_control
->fifos
[i
].list_info
= kmalloc(list_holder_size
,
483 if (!mac_control
->fifos
[i
].list_info
) {
485 "Malloc failed for list_info\n");
488 memset(mac_control
->fifos
[i
].list_info
, 0, list_holder_size
);
490 for (i
= 0; i
< config
->tx_fifo_num
; i
++) {
491 int page_num
= TXD_MEM_PAGE_CNT(config
->tx_cfg
[i
].fifo_len
,
493 mac_control
->fifos
[i
].tx_curr_put_info
.offset
= 0;
494 mac_control
->fifos
[i
].tx_curr_put_info
.fifo_len
=
495 config
->tx_cfg
[i
].fifo_len
- 1;
496 mac_control
->fifos
[i
].tx_curr_get_info
.offset
= 0;
497 mac_control
->fifos
[i
].tx_curr_get_info
.fifo_len
=
498 config
->tx_cfg
[i
].fifo_len
- 1;
499 mac_control
->fifos
[i
].fifo_no
= i
;
500 mac_control
->fifos
[i
].nic
= nic
;
501 mac_control
->fifos
[i
].max_txds
= MAX_SKB_FRAGS
+ 2;
503 for (j
= 0; j
< page_num
; j
++) {
507 tmp_v
= pci_alloc_consistent(nic
->pdev
,
511 "pci_alloc_consistent ");
512 DBG_PRINT(ERR_DBG
, "failed for TxDL\n");
515 /* If we got a zero DMA address(can happen on
516 * certain platforms like PPC), reallocate.
517 * Store virtual address of page we don't want,
521 mac_control
->zerodma_virt_addr
= tmp_v
;
523 "%s: Zero DMA address for TxDL. ", dev
->name
);
525 "Virtual address %p\n", tmp_v
);
526 tmp_v
= pci_alloc_consistent(nic
->pdev
,
530 "pci_alloc_consistent ");
531 DBG_PRINT(ERR_DBG
, "failed for TxDL\n");
535 while (k
< lst_per_page
) {
536 int l
= (j
* lst_per_page
) + k
;
537 if (l
== config
->tx_cfg
[i
].fifo_len
)
539 mac_control
->fifos
[i
].list_info
[l
].list_virt_addr
=
540 tmp_v
+ (k
* lst_size
);
541 mac_control
->fifos
[i
].list_info
[l
].list_phy_addr
=
542 tmp_p
+ (k
* lst_size
);
548 nic
->ufo_in_band_v
= kmalloc((sizeof(u64
) * size
), GFP_KERNEL
);
549 if (!nic
->ufo_in_band_v
)
552 /* Allocation and initialization of RXDs in Rings */
554 for (i
= 0; i
< config
->rx_ring_num
; i
++) {
555 if (config
->rx_cfg
[i
].num_rxd
%
556 (rxd_count
[nic
->rxd_mode
] + 1)) {
557 DBG_PRINT(ERR_DBG
, "%s: RxD count of ", dev
->name
);
558 DBG_PRINT(ERR_DBG
, "Ring%d is not a multiple of ",
560 DBG_PRINT(ERR_DBG
, "RxDs per Block");
563 size
+= config
->rx_cfg
[i
].num_rxd
;
564 mac_control
->rings
[i
].block_count
=
565 config
->rx_cfg
[i
].num_rxd
/
566 (rxd_count
[nic
->rxd_mode
] + 1 );
567 mac_control
->rings
[i
].pkt_cnt
= config
->rx_cfg
[i
].num_rxd
-
568 mac_control
->rings
[i
].block_count
;
570 if (nic
->rxd_mode
== RXD_MODE_1
)
571 size
= (size
* (sizeof(RxD1_t
)));
573 size
= (size
* (sizeof(RxD3_t
)));
576 for (i
= 0; i
< config
->rx_ring_num
; i
++) {
577 mac_control
->rings
[i
].rx_curr_get_info
.block_index
= 0;
578 mac_control
->rings
[i
].rx_curr_get_info
.offset
= 0;
579 mac_control
->rings
[i
].rx_curr_get_info
.ring_len
=
580 config
->rx_cfg
[i
].num_rxd
- 1;
581 mac_control
->rings
[i
].rx_curr_put_info
.block_index
= 0;
582 mac_control
->rings
[i
].rx_curr_put_info
.offset
= 0;
583 mac_control
->rings
[i
].rx_curr_put_info
.ring_len
=
584 config
->rx_cfg
[i
].num_rxd
- 1;
585 mac_control
->rings
[i
].nic
= nic
;
586 mac_control
->rings
[i
].ring_no
= i
;
588 blk_cnt
= config
->rx_cfg
[i
].num_rxd
/
589 (rxd_count
[nic
->rxd_mode
] + 1);
590 /* Allocating all the Rx blocks */
591 for (j
= 0; j
< blk_cnt
; j
++) {
592 rx_block_info_t
*rx_blocks
;
595 rx_blocks
= &mac_control
->rings
[i
].rx_blocks
[j
];
596 size
= SIZE_OF_BLOCK
; //size is always page size
597 tmp_v_addr
= pci_alloc_consistent(nic
->pdev
, size
,
599 if (tmp_v_addr
== NULL
) {
601 * In case of failure, free_shared_mem()
602 * is called, which should free any
603 * memory that was alloced till the
606 rx_blocks
->block_virt_addr
= tmp_v_addr
;
609 memset(tmp_v_addr
, 0, size
);
610 rx_blocks
->block_virt_addr
= tmp_v_addr
;
611 rx_blocks
->block_dma_addr
= tmp_p_addr
;
612 rx_blocks
->rxds
= kmalloc(sizeof(rxd_info_t
)*
613 rxd_count
[nic
->rxd_mode
],
615 for (l
=0; l
<rxd_count
[nic
->rxd_mode
];l
++) {
616 rx_blocks
->rxds
[l
].virt_addr
=
617 rx_blocks
->block_virt_addr
+
618 (rxd_size
[nic
->rxd_mode
] * l
);
619 rx_blocks
->rxds
[l
].dma_addr
=
620 rx_blocks
->block_dma_addr
+
621 (rxd_size
[nic
->rxd_mode
] * l
);
624 /* Interlinking all Rx Blocks */
625 for (j
= 0; j
< blk_cnt
; j
++) {
627 mac_control
->rings
[i
].rx_blocks
[j
].block_virt_addr
;
629 mac_control
->rings
[i
].rx_blocks
[(j
+ 1) %
630 blk_cnt
].block_virt_addr
;
632 mac_control
->rings
[i
].rx_blocks
[j
].block_dma_addr
;
634 mac_control
->rings
[i
].rx_blocks
[(j
+ 1) %
635 blk_cnt
].block_dma_addr
;
637 pre_rxd_blk
= (RxD_block_t
*) tmp_v_addr
;
638 pre_rxd_blk
->reserved_2_pNext_RxD_block
=
639 (unsigned long) tmp_v_addr_next
;
640 pre_rxd_blk
->pNext_RxD_Blk_physical
=
641 (u64
) tmp_p_addr_next
;
644 if (nic
->rxd_mode
>= RXD_MODE_3A
) {
646 * Allocation of Storages for buffer addresses in 2BUFF mode
647 * and the buffers as well.
649 for (i
= 0; i
< config
->rx_ring_num
; i
++) {
650 blk_cnt
= config
->rx_cfg
[i
].num_rxd
/
651 (rxd_count
[nic
->rxd_mode
]+ 1);
652 mac_control
->rings
[i
].ba
=
653 kmalloc((sizeof(buffAdd_t
*) * blk_cnt
),
655 if (!mac_control
->rings
[i
].ba
)
657 for (j
= 0; j
< blk_cnt
; j
++) {
659 mac_control
->rings
[i
].ba
[j
] =
660 kmalloc((sizeof(buffAdd_t
) *
661 (rxd_count
[nic
->rxd_mode
] + 1)),
663 if (!mac_control
->rings
[i
].ba
[j
])
665 while (k
!= rxd_count
[nic
->rxd_mode
]) {
666 ba
= &mac_control
->rings
[i
].ba
[j
][k
];
668 ba
->ba_0_org
= (void *) kmalloc
669 (BUF0_LEN
+ ALIGN_SIZE
, GFP_KERNEL
);
672 tmp
= (unsigned long)ba
->ba_0_org
;
674 tmp
&= ~((unsigned long) ALIGN_SIZE
);
675 ba
->ba_0
= (void *) tmp
;
677 ba
->ba_1_org
= (void *) kmalloc
678 (BUF1_LEN
+ ALIGN_SIZE
, GFP_KERNEL
);
681 tmp
= (unsigned long) ba
->ba_1_org
;
683 tmp
&= ~((unsigned long) ALIGN_SIZE
);
684 ba
->ba_1
= (void *) tmp
;
691 /* Allocation and initialization of Statistics block */
692 size
= sizeof(StatInfo_t
);
693 mac_control
->stats_mem
= pci_alloc_consistent
694 (nic
->pdev
, size
, &mac_control
->stats_mem_phy
);
696 if (!mac_control
->stats_mem
) {
698 * In case of failure, free_shared_mem() is called, which
699 * should free any memory that was alloced till the
704 mac_control
->stats_mem_sz
= size
;
706 tmp_v_addr
= mac_control
->stats_mem
;
707 mac_control
->stats_info
= (StatInfo_t
*) tmp_v_addr
;
708 memset(tmp_v_addr
, 0, size
);
709 DBG_PRINT(INIT_DBG
, "%s:Ring Mem PHY: 0x%llx\n", dev
->name
,
710 (unsigned long long) tmp_p_addr
);
716 * free_shared_mem - Free the allocated Memory
717 * @nic: Device private variable.
718 * Description: This function is to free all memory locations allocated by
719 * the init_shared_mem() function and return it to the kernel.
722 static void free_shared_mem(struct s2io_nic
*nic
)
724 int i
, j
, blk_cnt
, size
;
726 dma_addr_t tmp_p_addr
;
727 mac_info_t
*mac_control
;
728 struct config_param
*config
;
729 int lst_size
, lst_per_page
;
730 struct net_device
*dev
= nic
->dev
;
735 mac_control
= &nic
->mac_control
;
736 config
= &nic
->config
;
738 lst_size
= (sizeof(TxD_t
) * config
->max_txds
);
739 lst_per_page
= PAGE_SIZE
/ lst_size
;
741 for (i
= 0; i
< config
->tx_fifo_num
; i
++) {
742 int page_num
= TXD_MEM_PAGE_CNT(config
->tx_cfg
[i
].fifo_len
,
744 for (j
= 0; j
< page_num
; j
++) {
745 int mem_blks
= (j
* lst_per_page
);
746 if (!mac_control
->fifos
[i
].list_info
)
748 if (!mac_control
->fifos
[i
].list_info
[mem_blks
].
751 pci_free_consistent(nic
->pdev
, PAGE_SIZE
,
752 mac_control
->fifos
[i
].
755 mac_control
->fifos
[i
].
759 /* If we got a zero DMA address during allocation,
762 if (mac_control
->zerodma_virt_addr
) {
763 pci_free_consistent(nic
->pdev
, PAGE_SIZE
,
764 mac_control
->zerodma_virt_addr
,
767 "%s: Freeing TxDL with zero DMA addr. ",
769 DBG_PRINT(INIT_DBG
, "Virtual address %p\n",
770 mac_control
->zerodma_virt_addr
);
772 kfree(mac_control
->fifos
[i
].list_info
);
775 size
= SIZE_OF_BLOCK
;
776 for (i
= 0; i
< config
->rx_ring_num
; i
++) {
777 blk_cnt
= mac_control
->rings
[i
].block_count
;
778 for (j
= 0; j
< blk_cnt
; j
++) {
779 tmp_v_addr
= mac_control
->rings
[i
].rx_blocks
[j
].
781 tmp_p_addr
= mac_control
->rings
[i
].rx_blocks
[j
].
783 if (tmp_v_addr
== NULL
)
785 pci_free_consistent(nic
->pdev
, size
,
786 tmp_v_addr
, tmp_p_addr
);
787 kfree(mac_control
->rings
[i
].rx_blocks
[j
].rxds
);
791 if (nic
->rxd_mode
>= RXD_MODE_3A
) {
792 /* Freeing buffer storage addresses in 2BUFF mode. */
793 for (i
= 0; i
< config
->rx_ring_num
; i
++) {
794 blk_cnt
= config
->rx_cfg
[i
].num_rxd
/
795 (rxd_count
[nic
->rxd_mode
] + 1);
796 for (j
= 0; j
< blk_cnt
; j
++) {
798 if (!mac_control
->rings
[i
].ba
[j
])
800 while (k
!= rxd_count
[nic
->rxd_mode
]) {
802 &mac_control
->rings
[i
].ba
[j
][k
];
807 kfree(mac_control
->rings
[i
].ba
[j
]);
809 kfree(mac_control
->rings
[i
].ba
);
813 if (mac_control
->stats_mem
) {
814 pci_free_consistent(nic
->pdev
,
815 mac_control
->stats_mem_sz
,
816 mac_control
->stats_mem
,
817 mac_control
->stats_mem_phy
);
819 if (nic
->ufo_in_band_v
)
820 kfree(nic
->ufo_in_band_v
);
824 * s2io_verify_pci_mode -
827 static int s2io_verify_pci_mode(nic_t
*nic
)
829 XENA_dev_config_t __iomem
*bar0
= nic
->bar0
;
830 register u64 val64
= 0;
833 val64
= readq(&bar0
->pci_mode
);
834 mode
= (u8
)GET_PCI_MODE(val64
);
836 if ( val64
& PCI_MODE_UNKNOWN_MODE
)
837 return -1; /* Unknown PCI mode */
841 #define NEC_VENID 0x1033
842 #define NEC_DEVID 0x0125
843 static int s2io_on_nec_bridge(struct pci_dev
*s2io_pdev
)
845 struct pci_dev
*tdev
= NULL
;
846 while ((tdev
= pci_find_device(PCI_ANY_ID
, PCI_ANY_ID
, tdev
)) != NULL
) {
847 if ((tdev
->vendor
== NEC_VENID
) && (tdev
->device
== NEC_DEVID
)){
848 if (tdev
->bus
== s2io_pdev
->bus
->parent
)
855 static int bus_speed
[8] = {33, 133, 133, 200, 266, 133, 200, 266};
857 * s2io_print_pci_mode -
859 static int s2io_print_pci_mode(nic_t
*nic
)
861 XENA_dev_config_t __iomem
*bar0
= nic
->bar0
;
862 register u64 val64
= 0;
864 struct config_param
*config
= &nic
->config
;
866 val64
= readq(&bar0
->pci_mode
);
867 mode
= (u8
)GET_PCI_MODE(val64
);
869 if ( val64
& PCI_MODE_UNKNOWN_MODE
)
870 return -1; /* Unknown PCI mode */
872 config
->bus_speed
= bus_speed
[mode
];
874 if (s2io_on_nec_bridge(nic
->pdev
)) {
875 DBG_PRINT(ERR_DBG
, "%s: Device is on PCI-E bus\n",
880 if (val64
& PCI_MODE_32_BITS
) {
881 DBG_PRINT(ERR_DBG
, "%s: Device is on 32 bit ", nic
->dev
->name
);
883 DBG_PRINT(ERR_DBG
, "%s: Device is on 64 bit ", nic
->dev
->name
);
887 case PCI_MODE_PCI_33
:
888 DBG_PRINT(ERR_DBG
, "33MHz PCI bus\n");
890 case PCI_MODE_PCI_66
:
891 DBG_PRINT(ERR_DBG
, "66MHz PCI bus\n");
893 case PCI_MODE_PCIX_M1_66
:
894 DBG_PRINT(ERR_DBG
, "66MHz PCIX(M1) bus\n");
896 case PCI_MODE_PCIX_M1_100
:
897 DBG_PRINT(ERR_DBG
, "100MHz PCIX(M1) bus\n");
899 case PCI_MODE_PCIX_M1_133
:
900 DBG_PRINT(ERR_DBG
, "133MHz PCIX(M1) bus\n");
902 case PCI_MODE_PCIX_M2_66
:
903 DBG_PRINT(ERR_DBG
, "133MHz PCIX(M2) bus\n");
905 case PCI_MODE_PCIX_M2_100
:
906 DBG_PRINT(ERR_DBG
, "200MHz PCIX(M2) bus\n");
908 case PCI_MODE_PCIX_M2_133
:
909 DBG_PRINT(ERR_DBG
, "266MHz PCIX(M2) bus\n");
912 return -1; /* Unsupported bus speed */
919 * init_nic - Initialization of hardware
920 * @nic: device peivate variable
921 * Description: The function sequentially configures every block
922 * of the H/W from their reset values.
923 * Return Value: SUCCESS on success and
924 * '-1' on failure (endian settings incorrect).
927 static int init_nic(struct s2io_nic
*nic
)
929 XENA_dev_config_t __iomem
*bar0
= nic
->bar0
;
930 struct net_device
*dev
= nic
->dev
;
931 register u64 val64
= 0;
935 mac_info_t
*mac_control
;
936 struct config_param
*config
;
938 unsigned long long mem_share
;
941 mac_control
= &nic
->mac_control
;
942 config
= &nic
->config
;
944 /* to set the swapper controle on the card */
945 if(s2io_set_swapper(nic
)) {
946 DBG_PRINT(ERR_DBG
,"ERROR: Setting Swapper failed\n");
951 * Herc requires EOI to be removed from reset before XGXS, so..
953 if (nic
->device_type
& XFRAME_II_DEVICE
) {
954 val64
= 0xA500000000ULL
;
955 writeq(val64
, &bar0
->sw_reset
);
957 val64
= readq(&bar0
->sw_reset
);
960 /* Remove XGXS from reset state */
962 writeq(val64
, &bar0
->sw_reset
);
964 val64
= readq(&bar0
->sw_reset
);
966 /* Enable Receiving broadcasts */
967 add
= &bar0
->mac_cfg
;
968 val64
= readq(&bar0
->mac_cfg
);
969 val64
|= MAC_RMAC_BCAST_ENABLE
;
970 writeq(RMAC_CFG_KEY(0x4C0D), &bar0
->rmac_cfg_key
);
971 writel((u32
) val64
, add
);
972 writeq(RMAC_CFG_KEY(0x4C0D), &bar0
->rmac_cfg_key
);
973 writel((u32
) (val64
>> 32), (add
+ 4));
975 /* Read registers in all blocks */
976 val64
= readq(&bar0
->mac_int_mask
);
977 val64
= readq(&bar0
->mc_int_mask
);
978 val64
= readq(&bar0
->xgxs_int_mask
);
982 writeq(vBIT(val64
, 2, 14), &bar0
->rmac_max_pyld_len
);
984 if (nic
->device_type
& XFRAME_II_DEVICE
) {
985 while (herc_act_dtx_cfg
[dtx_cnt
] != END_SIGN
) {
986 SPECIAL_REG_WRITE(herc_act_dtx_cfg
[dtx_cnt
],
987 &bar0
->dtx_control
, UF
);
989 msleep(1); /* Necessary!! */
993 while (xena_dtx_cfg
[dtx_cnt
] != END_SIGN
) {
994 SPECIAL_REG_WRITE(xena_dtx_cfg
[dtx_cnt
],
995 &bar0
->dtx_control
, UF
);
996 val64
= readq(&bar0
->dtx_control
);
1001 /* Tx DMA Initialization */
1003 writeq(val64
, &bar0
->tx_fifo_partition_0
);
1004 writeq(val64
, &bar0
->tx_fifo_partition_1
);
1005 writeq(val64
, &bar0
->tx_fifo_partition_2
);
1006 writeq(val64
, &bar0
->tx_fifo_partition_3
);
1009 for (i
= 0, j
= 0; i
< config
->tx_fifo_num
; i
++) {
1011 vBIT(config
->tx_cfg
[i
].fifo_len
- 1, ((i
* 32) + 19),
1012 13) | vBIT(config
->tx_cfg
[i
].fifo_priority
,
1015 if (i
== (config
->tx_fifo_num
- 1)) {
1022 writeq(val64
, &bar0
->tx_fifo_partition_0
);
1026 writeq(val64
, &bar0
->tx_fifo_partition_1
);
1030 writeq(val64
, &bar0
->tx_fifo_partition_2
);
1034 writeq(val64
, &bar0
->tx_fifo_partition_3
);
1040 * Disable 4 PCCs for Xena1, 2 and 3 as per H/W bug
1041 * SXE-008 TRANSMIT DMA ARBITRATION ISSUE.
1043 if ((nic
->device_type
== XFRAME_I_DEVICE
) &&
1044 (get_xena_rev_id(nic
->pdev
) < 4))
1045 writeq(PCC_ENABLE_FOUR
, &bar0
->pcc_enable
);
1047 val64
= readq(&bar0
->tx_fifo_partition_0
);
1048 DBG_PRINT(INIT_DBG
, "Fifo partition at: 0x%p is: 0x%llx\n",
1049 &bar0
->tx_fifo_partition_0
, (unsigned long long) val64
);
1052 * Initialization of Tx_PA_CONFIG register to ignore packet
1053 * integrity checking.
1055 val64
= readq(&bar0
->tx_pa_cfg
);
1056 val64
|= TX_PA_CFG_IGNORE_FRM_ERR
| TX_PA_CFG_IGNORE_SNAP_OUI
|
1057 TX_PA_CFG_IGNORE_LLC_CTRL
| TX_PA_CFG_IGNORE_L2_ERR
;
1058 writeq(val64
, &bar0
->tx_pa_cfg
);
1060 /* Rx DMA intialization. */
1062 for (i
= 0; i
< config
->rx_ring_num
; i
++) {
1064 vBIT(config
->rx_cfg
[i
].ring_priority
, (5 + (i
* 8)),
1067 writeq(val64
, &bar0
->rx_queue_priority
);
1070 * Allocating equal share of memory to all the
1074 if (nic
->device_type
& XFRAME_II_DEVICE
)
1079 for (i
= 0; i
< config
->rx_ring_num
; i
++) {
1082 mem_share
= (mem_size
/ config
->rx_ring_num
+
1083 mem_size
% config
->rx_ring_num
);
1084 val64
|= RX_QUEUE_CFG_Q0_SZ(mem_share
);
1087 mem_share
= (mem_size
/ config
->rx_ring_num
);
1088 val64
|= RX_QUEUE_CFG_Q1_SZ(mem_share
);
1091 mem_share
= (mem_size
/ config
->rx_ring_num
);
1092 val64
|= RX_QUEUE_CFG_Q2_SZ(mem_share
);
1095 mem_share
= (mem_size
/ config
->rx_ring_num
);
1096 val64
|= RX_QUEUE_CFG_Q3_SZ(mem_share
);
1099 mem_share
= (mem_size
/ config
->rx_ring_num
);
1100 val64
|= RX_QUEUE_CFG_Q4_SZ(mem_share
);
1103 mem_share
= (mem_size
/ config
->rx_ring_num
);
1104 val64
|= RX_QUEUE_CFG_Q5_SZ(mem_share
);
1107 mem_share
= (mem_size
/ config
->rx_ring_num
);
1108 val64
|= RX_QUEUE_CFG_Q6_SZ(mem_share
);
1111 mem_share
= (mem_size
/ config
->rx_ring_num
);
1112 val64
|= RX_QUEUE_CFG_Q7_SZ(mem_share
);
1116 writeq(val64
, &bar0
->rx_queue_cfg
);
1119 * Filling Tx round robin registers
1120 * as per the number of FIFOs
1122 switch (config
->tx_fifo_num
) {
1124 val64
= 0x0000000000000000ULL
;
1125 writeq(val64
, &bar0
->tx_w_round_robin_0
);
1126 writeq(val64
, &bar0
->tx_w_round_robin_1
);
1127 writeq(val64
, &bar0
->tx_w_round_robin_2
);
1128 writeq(val64
, &bar0
->tx_w_round_robin_3
);
1129 writeq(val64
, &bar0
->tx_w_round_robin_4
);
1132 val64
= 0x0000010000010000ULL
;
1133 writeq(val64
, &bar0
->tx_w_round_robin_0
);
1134 val64
= 0x0100000100000100ULL
;
1135 writeq(val64
, &bar0
->tx_w_round_robin_1
);
1136 val64
= 0x0001000001000001ULL
;
1137 writeq(val64
, &bar0
->tx_w_round_robin_2
);
1138 val64
= 0x0000010000010000ULL
;
1139 writeq(val64
, &bar0
->tx_w_round_robin_3
);
1140 val64
= 0x0100000000000000ULL
;
1141 writeq(val64
, &bar0
->tx_w_round_robin_4
);
1144 val64
= 0x0001000102000001ULL
;
1145 writeq(val64
, &bar0
->tx_w_round_robin_0
);
1146 val64
= 0x0001020000010001ULL
;
1147 writeq(val64
, &bar0
->tx_w_round_robin_1
);
1148 val64
= 0x0200000100010200ULL
;
1149 writeq(val64
, &bar0
->tx_w_round_robin_2
);
1150 val64
= 0x0001000102000001ULL
;
1151 writeq(val64
, &bar0
->tx_w_round_robin_3
);
1152 val64
= 0x0001020000000000ULL
;
1153 writeq(val64
, &bar0
->tx_w_round_robin_4
);
1156 val64
= 0x0001020300010200ULL
;
1157 writeq(val64
, &bar0
->tx_w_round_robin_0
);
1158 val64
= 0x0100000102030001ULL
;
1159 writeq(val64
, &bar0
->tx_w_round_robin_1
);
1160 val64
= 0x0200010000010203ULL
;
1161 writeq(val64
, &bar0
->tx_w_round_robin_2
);
1162 val64
= 0x0001020001000001ULL
;
1163 writeq(val64
, &bar0
->tx_w_round_robin_3
);
1164 val64
= 0x0203000100000000ULL
;
1165 writeq(val64
, &bar0
->tx_w_round_robin_4
);
1168 val64
= 0x0001000203000102ULL
;
1169 writeq(val64
, &bar0
->tx_w_round_robin_0
);
1170 val64
= 0x0001020001030004ULL
;
1171 writeq(val64
, &bar0
->tx_w_round_robin_1
);
1172 val64
= 0x0001000203000102ULL
;
1173 writeq(val64
, &bar0
->tx_w_round_robin_2
);
1174 val64
= 0x0001020001030004ULL
;
1175 writeq(val64
, &bar0
->tx_w_round_robin_3
);
1176 val64
= 0x0001000000000000ULL
;
1177 writeq(val64
, &bar0
->tx_w_round_robin_4
);
1180 val64
= 0x0001020304000102ULL
;
1181 writeq(val64
, &bar0
->tx_w_round_robin_0
);
1182 val64
= 0x0304050001020001ULL
;
1183 writeq(val64
, &bar0
->tx_w_round_robin_1
);
1184 val64
= 0x0203000100000102ULL
;
1185 writeq(val64
, &bar0
->tx_w_round_robin_2
);
1186 val64
= 0x0304000102030405ULL
;
1187 writeq(val64
, &bar0
->tx_w_round_robin_3
);
1188 val64
= 0x0001000200000000ULL
;
1189 writeq(val64
, &bar0
->tx_w_round_robin_4
);
1192 val64
= 0x0001020001020300ULL
;
1193 writeq(val64
, &bar0
->tx_w_round_robin_0
);
1194 val64
= 0x0102030400010203ULL
;
1195 writeq(val64
, &bar0
->tx_w_round_robin_1
);
1196 val64
= 0x0405060001020001ULL
;
1197 writeq(val64
, &bar0
->tx_w_round_robin_2
);
1198 val64
= 0x0304050000010200ULL
;
1199 writeq(val64
, &bar0
->tx_w_round_robin_3
);
1200 val64
= 0x0102030000000000ULL
;
1201 writeq(val64
, &bar0
->tx_w_round_robin_4
);
1204 val64
= 0x0001020300040105ULL
;
1205 writeq(val64
, &bar0
->tx_w_round_robin_0
);
1206 val64
= 0x0200030106000204ULL
;
1207 writeq(val64
, &bar0
->tx_w_round_robin_1
);
1208 val64
= 0x0103000502010007ULL
;
1209 writeq(val64
, &bar0
->tx_w_round_robin_2
);
1210 val64
= 0x0304010002060500ULL
;
1211 writeq(val64
, &bar0
->tx_w_round_robin_3
);
1212 val64
= 0x0103020400000000ULL
;
1213 writeq(val64
, &bar0
->tx_w_round_robin_4
);
1217 /* Enable Tx FIFO partition 0. */
1218 val64
= readq(&bar0
->tx_fifo_partition_0
);
1219 val64
|= (TX_FIFO_PARTITION_EN
);
1220 writeq(val64
, &bar0
->tx_fifo_partition_0
);
1222 /* Filling the Rx round robin registers as per the
1223 * number of Rings and steering based on QoS.
1225 switch (config
->rx_ring_num
) {
1227 val64
= 0x8080808080808080ULL
;
1228 writeq(val64
, &bar0
->rts_qos_steering
);
1231 val64
= 0x0000010000010000ULL
;
1232 writeq(val64
, &bar0
->rx_w_round_robin_0
);
1233 val64
= 0x0100000100000100ULL
;
1234 writeq(val64
, &bar0
->rx_w_round_robin_1
);
1235 val64
= 0x0001000001000001ULL
;
1236 writeq(val64
, &bar0
->rx_w_round_robin_2
);
1237 val64
= 0x0000010000010000ULL
;
1238 writeq(val64
, &bar0
->rx_w_round_robin_3
);
1239 val64
= 0x0100000000000000ULL
;
1240 writeq(val64
, &bar0
->rx_w_round_robin_4
);
1242 val64
= 0x8080808040404040ULL
;
1243 writeq(val64
, &bar0
->rts_qos_steering
);
1246 val64
= 0x0001000102000001ULL
;
1247 writeq(val64
, &bar0
->rx_w_round_robin_0
);
1248 val64
= 0x0001020000010001ULL
;
1249 writeq(val64
, &bar0
->rx_w_round_robin_1
);
1250 val64
= 0x0200000100010200ULL
;
1251 writeq(val64
, &bar0
->rx_w_round_robin_2
);
1252 val64
= 0x0001000102000001ULL
;
1253 writeq(val64
, &bar0
->rx_w_round_robin_3
);
1254 val64
= 0x0001020000000000ULL
;
1255 writeq(val64
, &bar0
->rx_w_round_robin_4
);
1257 val64
= 0x8080804040402020ULL
;
1258 writeq(val64
, &bar0
->rts_qos_steering
);
1261 val64
= 0x0001020300010200ULL
;
1262 writeq(val64
, &bar0
->rx_w_round_robin_0
);
1263 val64
= 0x0100000102030001ULL
;
1264 writeq(val64
, &bar0
->rx_w_round_robin_1
);
1265 val64
= 0x0200010000010203ULL
;
1266 writeq(val64
, &bar0
->rx_w_round_robin_2
);
1267 val64
= 0x0001020001000001ULL
;
1268 writeq(val64
, &bar0
->rx_w_round_robin_3
);
1269 val64
= 0x0203000100000000ULL
;
1270 writeq(val64
, &bar0
->rx_w_round_robin_4
);
1272 val64
= 0x8080404020201010ULL
;
1273 writeq(val64
, &bar0
->rts_qos_steering
);
1276 val64
= 0x0001000203000102ULL
;
1277 writeq(val64
, &bar0
->rx_w_round_robin_0
);
1278 val64
= 0x0001020001030004ULL
;
1279 writeq(val64
, &bar0
->rx_w_round_robin_1
);
1280 val64
= 0x0001000203000102ULL
;
1281 writeq(val64
, &bar0
->rx_w_round_robin_2
);
1282 val64
= 0x0001020001030004ULL
;
1283 writeq(val64
, &bar0
->rx_w_round_robin_3
);
1284 val64
= 0x0001000000000000ULL
;
1285 writeq(val64
, &bar0
->rx_w_round_robin_4
);
1287 val64
= 0x8080404020201008ULL
;
1288 writeq(val64
, &bar0
->rts_qos_steering
);
1291 val64
= 0x0001020304000102ULL
;
1292 writeq(val64
, &bar0
->rx_w_round_robin_0
);
1293 val64
= 0x0304050001020001ULL
;
1294 writeq(val64
, &bar0
->rx_w_round_robin_1
);
1295 val64
= 0x0203000100000102ULL
;
1296 writeq(val64
, &bar0
->rx_w_round_robin_2
);
1297 val64
= 0x0304000102030405ULL
;
1298 writeq(val64
, &bar0
->rx_w_round_robin_3
);
1299 val64
= 0x0001000200000000ULL
;
1300 writeq(val64
, &bar0
->rx_w_round_robin_4
);
1302 val64
= 0x8080404020100804ULL
;
1303 writeq(val64
, &bar0
->rts_qos_steering
);
1306 val64
= 0x0001020001020300ULL
;
1307 writeq(val64
, &bar0
->rx_w_round_robin_0
);
1308 val64
= 0x0102030400010203ULL
;
1309 writeq(val64
, &bar0
->rx_w_round_robin_1
);
1310 val64
= 0x0405060001020001ULL
;
1311 writeq(val64
, &bar0
->rx_w_round_robin_2
);
1312 val64
= 0x0304050000010200ULL
;
1313 writeq(val64
, &bar0
->rx_w_round_robin_3
);
1314 val64
= 0x0102030000000000ULL
;
1315 writeq(val64
, &bar0
->rx_w_round_robin_4
);
1317 val64
= 0x8080402010080402ULL
;
1318 writeq(val64
, &bar0
->rts_qos_steering
);
1321 val64
= 0x0001020300040105ULL
;
1322 writeq(val64
, &bar0
->rx_w_round_robin_0
);
1323 val64
= 0x0200030106000204ULL
;
1324 writeq(val64
, &bar0
->rx_w_round_robin_1
);
1325 val64
= 0x0103000502010007ULL
;
1326 writeq(val64
, &bar0
->rx_w_round_robin_2
);
1327 val64
= 0x0304010002060500ULL
;
1328 writeq(val64
, &bar0
->rx_w_round_robin_3
);
1329 val64
= 0x0103020400000000ULL
;
1330 writeq(val64
, &bar0
->rx_w_round_robin_4
);
1332 val64
= 0x8040201008040201ULL
;
1333 writeq(val64
, &bar0
->rts_qos_steering
);
1339 for (i
= 0; i
< 8; i
++)
1340 writeq(val64
, &bar0
->rts_frm_len_n
[i
]);
1342 /* Set the default rts frame length for the rings configured */
1343 val64
= MAC_RTS_FRM_LEN_SET(dev
->mtu
+22);
1344 for (i
= 0 ; i
< config
->rx_ring_num
; i
++)
1345 writeq(val64
, &bar0
->rts_frm_len_n
[i
]);
1347 /* Set the frame length for the configured rings
1348 * desired by the user
1350 for (i
= 0; i
< config
->rx_ring_num
; i
++) {
1351 /* If rts_frm_len[i] == 0 then it is assumed that user not
1352 * specified frame length steering.
1353 * If the user provides the frame length then program
1354 * the rts_frm_len register for those values or else
1355 * leave it as it is.
1357 if (rts_frm_len
[i
] != 0) {
1358 writeq(MAC_RTS_FRM_LEN_SET(rts_frm_len
[i
]),
1359 &bar0
->rts_frm_len_n
[i
]);
1363 /* Program statistics memory */
1364 writeq(mac_control
->stats_mem_phy
, &bar0
->stat_addr
);
1366 if (nic
->device_type
== XFRAME_II_DEVICE
) {
1367 val64
= STAT_BC(0x320);
1368 writeq(val64
, &bar0
->stat_byte_cnt
);
1372 * Initializing the sampling rate for the device to calculate the
1373 * bandwidth utilization.
1375 val64
= MAC_TX_LINK_UTIL_VAL(tmac_util_period
) |
1376 MAC_RX_LINK_UTIL_VAL(rmac_util_period
);
1377 writeq(val64
, &bar0
->mac_link_util
);
1381 * Initializing the Transmit and Receive Traffic Interrupt
1385 * TTI Initialization. Default Tx timer gets us about
1386 * 250 interrupts per sec. Continuous interrupts are enabled
1389 if (nic
->device_type
== XFRAME_II_DEVICE
) {
1390 int count
= (nic
->config
.bus_speed
* 125)/2;
1391 val64
= TTI_DATA1_MEM_TX_TIMER_VAL(count
);
1394 val64
= TTI_DATA1_MEM_TX_TIMER_VAL(0x2078);
1396 val64
|= TTI_DATA1_MEM_TX_URNG_A(0xA) |
1397 TTI_DATA1_MEM_TX_URNG_B(0x10) |
1398 TTI_DATA1_MEM_TX_URNG_C(0x30) | TTI_DATA1_MEM_TX_TIMER_AC_EN
;
1399 if (use_continuous_tx_intrs
)
1400 val64
|= TTI_DATA1_MEM_TX_TIMER_CI_EN
;
1401 writeq(val64
, &bar0
->tti_data1_mem
);
1403 val64
= TTI_DATA2_MEM_TX_UFC_A(0x10) |
1404 TTI_DATA2_MEM_TX_UFC_B(0x20) |
1405 TTI_DATA2_MEM_TX_UFC_C(0x70) | TTI_DATA2_MEM_TX_UFC_D(0x80);
1406 writeq(val64
, &bar0
->tti_data2_mem
);
1408 val64
= TTI_CMD_MEM_WE
| TTI_CMD_MEM_STROBE_NEW_CMD
;
1409 writeq(val64
, &bar0
->tti_command_mem
);
1412 * Once the operation completes, the Strobe bit of the command
1413 * register will be reset. We poll for this particular condition
1414 * We wait for a maximum of 500ms for the operation to complete,
1415 * if it's not complete by then we return error.
1419 val64
= readq(&bar0
->tti_command_mem
);
1420 if (!(val64
& TTI_CMD_MEM_STROBE_NEW_CMD
)) {
1424 DBG_PRINT(ERR_DBG
, "%s: TTI init Failed\n",
1432 if (nic
->config
.bimodal
) {
1434 for (k
= 0; k
< config
->rx_ring_num
; k
++) {
1435 val64
= TTI_CMD_MEM_WE
| TTI_CMD_MEM_STROBE_NEW_CMD
;
1436 val64
|= TTI_CMD_MEM_OFFSET(0x38+k
);
1437 writeq(val64
, &bar0
->tti_command_mem
);
1440 * Once the operation completes, the Strobe bit of the command
1441 * register will be reset. We poll for this particular condition
1442 * We wait for a maximum of 500ms for the operation to complete,
1443 * if it's not complete by then we return error.
1447 val64
= readq(&bar0
->tti_command_mem
);
1448 if (!(val64
& TTI_CMD_MEM_STROBE_NEW_CMD
)) {
1453 "%s: TTI init Failed\n",
1463 /* RTI Initialization */
1464 if (nic
->device_type
== XFRAME_II_DEVICE
) {
1466 * Programmed to generate Apprx 500 Intrs per
1469 int count
= (nic
->config
.bus_speed
* 125)/4;
1470 val64
= RTI_DATA1_MEM_RX_TIMER_VAL(count
);
1472 val64
= RTI_DATA1_MEM_RX_TIMER_VAL(0xFFF);
1474 val64
|= RTI_DATA1_MEM_RX_URNG_A(0xA) |
1475 RTI_DATA1_MEM_RX_URNG_B(0x10) |
1476 RTI_DATA1_MEM_RX_URNG_C(0x30) | RTI_DATA1_MEM_RX_TIMER_AC_EN
;
1478 writeq(val64
, &bar0
->rti_data1_mem
);
1480 val64
= RTI_DATA2_MEM_RX_UFC_A(0x1) |
1481 RTI_DATA2_MEM_RX_UFC_B(0x2) ;
1482 if (nic
->intr_type
== MSI_X
)
1483 val64
|= (RTI_DATA2_MEM_RX_UFC_C(0x20) | \
1484 RTI_DATA2_MEM_RX_UFC_D(0x40));
1486 val64
|= (RTI_DATA2_MEM_RX_UFC_C(0x40) | \
1487 RTI_DATA2_MEM_RX_UFC_D(0x80));
1488 writeq(val64
, &bar0
->rti_data2_mem
);
1490 for (i
= 0; i
< config
->rx_ring_num
; i
++) {
1491 val64
= RTI_CMD_MEM_WE
| RTI_CMD_MEM_STROBE_NEW_CMD
1492 | RTI_CMD_MEM_OFFSET(i
);
1493 writeq(val64
, &bar0
->rti_command_mem
);
1496 * Once the operation completes, the Strobe bit of the
1497 * command register will be reset. We poll for this
1498 * particular condition. We wait for a maximum of 500ms
1499 * for the operation to complete, if it's not complete
1500 * by then we return error.
1504 val64
= readq(&bar0
->rti_command_mem
);
1505 if (!(val64
& RTI_CMD_MEM_STROBE_NEW_CMD
)) {
1509 DBG_PRINT(ERR_DBG
, "%s: RTI init Failed\n",
1520 * Initializing proper values as Pause threshold into all
1521 * the 8 Queues on Rx side.
1523 writeq(0xffbbffbbffbbffbbULL
, &bar0
->mc_pause_thresh_q0q3
);
1524 writeq(0xffbbffbbffbbffbbULL
, &bar0
->mc_pause_thresh_q4q7
);
1526 /* Disable RMAC PAD STRIPPING */
1527 add
= &bar0
->mac_cfg
;
1528 val64
= readq(&bar0
->mac_cfg
);
1529 val64
&= ~(MAC_CFG_RMAC_STRIP_PAD
);
1530 writeq(RMAC_CFG_KEY(0x4C0D), &bar0
->rmac_cfg_key
);
1531 writel((u32
) (val64
), add
);
1532 writeq(RMAC_CFG_KEY(0x4C0D), &bar0
->rmac_cfg_key
);
1533 writel((u32
) (val64
>> 32), (add
+ 4));
1534 val64
= readq(&bar0
->mac_cfg
);
1536 /* Enable FCS stripping by adapter */
1537 add
= &bar0
->mac_cfg
;
1538 val64
= readq(&bar0
->mac_cfg
);
1539 val64
|= MAC_CFG_RMAC_STRIP_FCS
;
1540 if (nic
->device_type
== XFRAME_II_DEVICE
)
1541 writeq(val64
, &bar0
->mac_cfg
);
1543 writeq(RMAC_CFG_KEY(0x4C0D), &bar0
->rmac_cfg_key
);
1544 writel((u32
) (val64
), add
);
1545 writeq(RMAC_CFG_KEY(0x4C0D), &bar0
->rmac_cfg_key
);
1546 writel((u32
) (val64
>> 32), (add
+ 4));
1550 * Set the time value to be inserted in the pause frame
1551 * generated by xena.
1553 val64
= readq(&bar0
->rmac_pause_cfg
);
1554 val64
&= ~(RMAC_PAUSE_HG_PTIME(0xffff));
1555 val64
|= RMAC_PAUSE_HG_PTIME(nic
->mac_control
.rmac_pause_time
);
1556 writeq(val64
, &bar0
->rmac_pause_cfg
);
1559 * Set the Threshold Limit for Generating the pause frame
1560 * If the amount of data in any Queue exceeds ratio of
1561 * (mac_control.mc_pause_threshold_q0q3 or q4q7)/256
1562 * pause frame is generated
1565 for (i
= 0; i
< 4; i
++) {
1567 (((u64
) 0xFF00 | nic
->mac_control
.
1568 mc_pause_threshold_q0q3
)
1571 writeq(val64
, &bar0
->mc_pause_thresh_q0q3
);
1574 for (i
= 0; i
< 4; i
++) {
1576 (((u64
) 0xFF00 | nic
->mac_control
.
1577 mc_pause_threshold_q4q7
)
1580 writeq(val64
, &bar0
->mc_pause_thresh_q4q7
);
1583 * TxDMA will stop Read request if the number of read split has
1584 * exceeded the limit pointed by shared_splits
1586 val64
= readq(&bar0
->pic_control
);
1587 val64
|= PIC_CNTL_SHARED_SPLITS(shared_splits
);
1588 writeq(val64
, &bar0
->pic_control
);
1590 if (nic
->config
.bus_speed
== 266) {
1591 writeq(TXREQTO_VAL(0x7f) | TXREQTO_EN
, &bar0
->txreqtimeout
);
1592 writeq(0x0, &bar0
->read_retry_delay
);
1593 writeq(0x0, &bar0
->write_retry_delay
);
1597 * Programming the Herc to split every write transaction
1598 * that does not start on an ADB to reduce disconnects.
1600 if (nic
->device_type
== XFRAME_II_DEVICE
) {
1601 val64
= EXT_REQ_EN
| MISC_LINK_STABILITY_PRD(3);
1602 writeq(val64
, &bar0
->misc_control
);
1603 val64
= readq(&bar0
->pic_control2
);
1604 val64
&= ~(BIT(13)|BIT(14)|BIT(15));
1605 writeq(val64
, &bar0
->pic_control2
);
1607 if (strstr(nic
->product_name
, "CX4")) {
1608 val64
= TMAC_AVG_IPG(0x17);
1609 writeq(val64
, &bar0
->tmac_avg_ipg
);
1614 #define LINK_UP_DOWN_INTERRUPT 1
1615 #define MAC_RMAC_ERR_TIMER 2
1617 static int s2io_link_fault_indication(nic_t
*nic
)
1619 if (nic
->intr_type
!= INTA
)
1620 return MAC_RMAC_ERR_TIMER
;
1621 if (nic
->device_type
== XFRAME_II_DEVICE
)
1622 return LINK_UP_DOWN_INTERRUPT
;
1624 return MAC_RMAC_ERR_TIMER
;
1628 * en_dis_able_nic_intrs - Enable or Disable the interrupts
1629 * @nic: device private variable,
1630 * @mask: A mask indicating which Intr block must be modified and,
1631 * @flag: A flag indicating whether to enable or disable the Intrs.
1632 * Description: This function will either disable or enable the interrupts
1633 * depending on the flag argument. The mask argument can be used to
1634 * enable/disable any Intr block.
1635 * Return Value: NONE.
1638 static void en_dis_able_nic_intrs(struct s2io_nic
*nic
, u16 mask
, int flag
)
1640 XENA_dev_config_t __iomem
*bar0
= nic
->bar0
;
1641 register u64 val64
= 0, temp64
= 0;
1643 /* Top level interrupt classification */
1644 /* PIC Interrupts */
1645 if ((mask
& (TX_PIC_INTR
| RX_PIC_INTR
))) {
1646 /* Enable PIC Intrs in the general intr mask register */
1647 val64
= TXPIC_INT_M
| PIC_RX_INT_M
;
1648 if (flag
== ENABLE_INTRS
) {
1649 temp64
= readq(&bar0
->general_int_mask
);
1650 temp64
&= ~((u64
) val64
);
1651 writeq(temp64
, &bar0
->general_int_mask
);
1653 * If Hercules adapter enable GPIO otherwise
1654 * disabled all PCIX, Flash, MDIO, IIC and GPIO
1655 * interrupts for now.
1658 if (s2io_link_fault_indication(nic
) ==
1659 LINK_UP_DOWN_INTERRUPT
) {
1660 temp64
= readq(&bar0
->pic_int_mask
);
1661 temp64
&= ~((u64
) PIC_INT_GPIO
);
1662 writeq(temp64
, &bar0
->pic_int_mask
);
1663 temp64
= readq(&bar0
->gpio_int_mask
);
1664 temp64
&= ~((u64
) GPIO_INT_MASK_LINK_UP
);
1665 writeq(temp64
, &bar0
->gpio_int_mask
);
1667 writeq(DISABLE_ALL_INTRS
, &bar0
->pic_int_mask
);
1670 * No MSI Support is available presently, so TTI and
1671 * RTI interrupts are also disabled.
1673 } else if (flag
== DISABLE_INTRS
) {
1675 * Disable PIC Intrs in the general
1676 * intr mask register
1678 writeq(DISABLE_ALL_INTRS
, &bar0
->pic_int_mask
);
1679 temp64
= readq(&bar0
->general_int_mask
);
1681 writeq(val64
, &bar0
->general_int_mask
);
1685 /* DMA Interrupts */
1686 /* Enabling/Disabling Tx DMA interrupts */
1687 if (mask
& TX_DMA_INTR
) {
1688 /* Enable TxDMA Intrs in the general intr mask register */
1689 val64
= TXDMA_INT_M
;
1690 if (flag
== ENABLE_INTRS
) {
1691 temp64
= readq(&bar0
->general_int_mask
);
1692 temp64
&= ~((u64
) val64
);
1693 writeq(temp64
, &bar0
->general_int_mask
);
1695 * Keep all interrupts other than PFC interrupt
1696 * and PCC interrupt disabled in DMA level.
1698 val64
= DISABLE_ALL_INTRS
& ~(TXDMA_PFC_INT_M
|
1700 writeq(val64
, &bar0
->txdma_int_mask
);
1702 * Enable only the MISC error 1 interrupt in PFC block
1704 val64
= DISABLE_ALL_INTRS
& (~PFC_MISC_ERR_1
);
1705 writeq(val64
, &bar0
->pfc_err_mask
);
1707 * Enable only the FB_ECC error interrupt in PCC block
1709 val64
= DISABLE_ALL_INTRS
& (~PCC_FB_ECC_ERR
);
1710 writeq(val64
, &bar0
->pcc_err_mask
);
1711 } else if (flag
== DISABLE_INTRS
) {
1713 * Disable TxDMA Intrs in the general intr mask
1716 writeq(DISABLE_ALL_INTRS
, &bar0
->txdma_int_mask
);
1717 writeq(DISABLE_ALL_INTRS
, &bar0
->pfc_err_mask
);
1718 temp64
= readq(&bar0
->general_int_mask
);
1720 writeq(val64
, &bar0
->general_int_mask
);
1724 /* Enabling/Disabling Rx DMA interrupts */
1725 if (mask
& RX_DMA_INTR
) {
1726 /* Enable RxDMA Intrs in the general intr mask register */
1727 val64
= RXDMA_INT_M
;
1728 if (flag
== ENABLE_INTRS
) {
1729 temp64
= readq(&bar0
->general_int_mask
);
1730 temp64
&= ~((u64
) val64
);
1731 writeq(temp64
, &bar0
->general_int_mask
);
1733 * All RxDMA block interrupts are disabled for now
1736 writeq(DISABLE_ALL_INTRS
, &bar0
->rxdma_int_mask
);
1737 } else if (flag
== DISABLE_INTRS
) {
1739 * Disable RxDMA Intrs in the general intr mask
1742 writeq(DISABLE_ALL_INTRS
, &bar0
->rxdma_int_mask
);
1743 temp64
= readq(&bar0
->general_int_mask
);
1745 writeq(val64
, &bar0
->general_int_mask
);
1749 /* MAC Interrupts */
1750 /* Enabling/Disabling MAC interrupts */
1751 if (mask
& (TX_MAC_INTR
| RX_MAC_INTR
)) {
1752 val64
= TXMAC_INT_M
| RXMAC_INT_M
;
1753 if (flag
== ENABLE_INTRS
) {
1754 temp64
= readq(&bar0
->general_int_mask
);
1755 temp64
&= ~((u64
) val64
);
1756 writeq(temp64
, &bar0
->general_int_mask
);
1758 * All MAC block error interrupts are disabled for now
1761 } else if (flag
== DISABLE_INTRS
) {
1763 * Disable MAC Intrs in the general intr mask register
1765 writeq(DISABLE_ALL_INTRS
, &bar0
->mac_int_mask
);
1766 writeq(DISABLE_ALL_INTRS
,
1767 &bar0
->mac_rmac_err_mask
);
1769 temp64
= readq(&bar0
->general_int_mask
);
1771 writeq(val64
, &bar0
->general_int_mask
);
1775 /* XGXS Interrupts */
1776 if (mask
& (TX_XGXS_INTR
| RX_XGXS_INTR
)) {
1777 val64
= TXXGXS_INT_M
| RXXGXS_INT_M
;
1778 if (flag
== ENABLE_INTRS
) {
1779 temp64
= readq(&bar0
->general_int_mask
);
1780 temp64
&= ~((u64
) val64
);
1781 writeq(temp64
, &bar0
->general_int_mask
);
1783 * All XGXS block error interrupts are disabled for now
1786 writeq(DISABLE_ALL_INTRS
, &bar0
->xgxs_int_mask
);
1787 } else if (flag
== DISABLE_INTRS
) {
1789 * Disable MC Intrs in the general intr mask register
1791 writeq(DISABLE_ALL_INTRS
, &bar0
->xgxs_int_mask
);
1792 temp64
= readq(&bar0
->general_int_mask
);
1794 writeq(val64
, &bar0
->general_int_mask
);
1798 /* Memory Controller(MC) interrupts */
1799 if (mask
& MC_INTR
) {
1801 if (flag
== ENABLE_INTRS
) {
1802 temp64
= readq(&bar0
->general_int_mask
);
1803 temp64
&= ~((u64
) val64
);
1804 writeq(temp64
, &bar0
->general_int_mask
);
1806 * Enable all MC Intrs.
1808 writeq(0x0, &bar0
->mc_int_mask
);
1809 writeq(0x0, &bar0
->mc_err_mask
);
1810 } else if (flag
== DISABLE_INTRS
) {
1812 * Disable MC Intrs in the general intr mask register
1814 writeq(DISABLE_ALL_INTRS
, &bar0
->mc_int_mask
);
1815 temp64
= readq(&bar0
->general_int_mask
);
1817 writeq(val64
, &bar0
->general_int_mask
);
1822 /* Tx traffic interrupts */
1823 if (mask
& TX_TRAFFIC_INTR
) {
1824 val64
= TXTRAFFIC_INT_M
;
1825 if (flag
== ENABLE_INTRS
) {
1826 temp64
= readq(&bar0
->general_int_mask
);
1827 temp64
&= ~((u64
) val64
);
1828 writeq(temp64
, &bar0
->general_int_mask
);
1830 * Enable all the Tx side interrupts
1831 * writing 0 Enables all 64 TX interrupt levels
1833 writeq(0x0, &bar0
->tx_traffic_mask
);
1834 } else if (flag
== DISABLE_INTRS
) {
1836 * Disable Tx Traffic Intrs in the general intr mask
1839 writeq(DISABLE_ALL_INTRS
, &bar0
->tx_traffic_mask
);
1840 temp64
= readq(&bar0
->general_int_mask
);
1842 writeq(val64
, &bar0
->general_int_mask
);
1846 /* Rx traffic interrupts */
1847 if (mask
& RX_TRAFFIC_INTR
) {
1848 val64
= RXTRAFFIC_INT_M
;
1849 if (flag
== ENABLE_INTRS
) {
1850 temp64
= readq(&bar0
->general_int_mask
);
1851 temp64
&= ~((u64
) val64
);
1852 writeq(temp64
, &bar0
->general_int_mask
);
1853 /* writing 0 Enables all 8 RX interrupt levels */
1854 writeq(0x0, &bar0
->rx_traffic_mask
);
1855 } else if (flag
== DISABLE_INTRS
) {
1857 * Disable Rx Traffic Intrs in the general intr mask
1860 writeq(DISABLE_ALL_INTRS
, &bar0
->rx_traffic_mask
);
1861 temp64
= readq(&bar0
->general_int_mask
);
1863 writeq(val64
, &bar0
->general_int_mask
);
1868 static int check_prc_pcc_state(u64 val64
, int flag
, int rev_id
, int herc
)
1872 if (flag
== FALSE
) {
1873 if ((!herc
&& (rev_id
>= 4)) || herc
) {
1874 if (!(val64
& ADAPTER_STATUS_RMAC_PCC_IDLE
) &&
1875 ((val64
& ADAPTER_STATUS_RC_PRC_QUIESCENT
) ==
1876 ADAPTER_STATUS_RC_PRC_QUIESCENT
)) {
1880 if (!(val64
& ADAPTER_STATUS_RMAC_PCC_FOUR_IDLE
) &&
1881 ((val64
& ADAPTER_STATUS_RC_PRC_QUIESCENT
) ==
1882 ADAPTER_STATUS_RC_PRC_QUIESCENT
)) {
1887 if ((!herc
&& (rev_id
>= 4)) || herc
) {
1888 if (((val64
& ADAPTER_STATUS_RMAC_PCC_IDLE
) ==
1889 ADAPTER_STATUS_RMAC_PCC_IDLE
) &&
1890 (!(val64
& ADAPTER_STATUS_RC_PRC_QUIESCENT
) ||
1891 ((val64
& ADAPTER_STATUS_RC_PRC_QUIESCENT
) ==
1892 ADAPTER_STATUS_RC_PRC_QUIESCENT
))) {
1896 if (((val64
& ADAPTER_STATUS_RMAC_PCC_FOUR_IDLE
) ==
1897 ADAPTER_STATUS_RMAC_PCC_FOUR_IDLE
) &&
1898 (!(val64
& ADAPTER_STATUS_RC_PRC_QUIESCENT
) ||
1899 ((val64
& ADAPTER_STATUS_RC_PRC_QUIESCENT
) ==
1900 ADAPTER_STATUS_RC_PRC_QUIESCENT
))) {
1909 * verify_xena_quiescence - Checks whether the H/W is ready
1910 * @val64 : Value read from adapter status register.
1911 * @flag : indicates if the adapter enable bit was ever written once
1913 * Description: Returns whether the H/W is ready to go or not. Depending
1914 * on whether adapter enable bit was written or not the comparison
1915 * differs and the calling function passes the input argument flag to
1917 * Return: 1 If xena is quiescence
1918 * 0 If Xena is not quiescence
1921 static int verify_xena_quiescence(nic_t
*sp
, u64 val64
, int flag
)
1924 u64 tmp64
= ~((u64
) val64
);
1925 int rev_id
= get_xena_rev_id(sp
->pdev
);
1927 herc
= (sp
->device_type
== XFRAME_II_DEVICE
);
1930 (ADAPTER_STATUS_TDMA_READY
| ADAPTER_STATUS_RDMA_READY
|
1931 ADAPTER_STATUS_PFC_READY
| ADAPTER_STATUS_TMAC_BUF_EMPTY
|
1932 ADAPTER_STATUS_PIC_QUIESCENT
| ADAPTER_STATUS_MC_DRAM_READY
|
1933 ADAPTER_STATUS_MC_QUEUES_READY
| ADAPTER_STATUS_M_PLL_LOCK
|
1934 ADAPTER_STATUS_P_PLL_LOCK
))) {
1935 ret
= check_prc_pcc_state(val64
, flag
, rev_id
, herc
);
1942 * fix_mac_address - Fix for Mac addr problem on Alpha platforms
1943 * @sp: Pointer to device specifc structure
1945 * New procedure to clear mac address reading problems on Alpha platforms
1949 static void fix_mac_address(nic_t
* sp
)
1951 XENA_dev_config_t __iomem
*bar0
= sp
->bar0
;
1955 while (fix_mac
[i
] != END_SIGN
) {
1956 writeq(fix_mac
[i
++], &bar0
->gpio_control
);
1958 val64
= readq(&bar0
->gpio_control
);
1963 * start_nic - Turns the device on
1964 * @nic : device private variable.
1966 * This function actually turns the device on. Before this function is
1967 * called,all Registers are configured from their reset states
1968 * and shared memory is allocated but the NIC is still quiescent. On
1969 * calling this function, the device interrupts are cleared and the NIC is
1970 * literally switched on by writing into the adapter control register.
1972 * SUCCESS on success and -1 on failure.
1975 static int start_nic(struct s2io_nic
*nic
)
1977 XENA_dev_config_t __iomem
*bar0
= nic
->bar0
;
1978 struct net_device
*dev
= nic
->dev
;
1979 register u64 val64
= 0;
1982 mac_info_t
*mac_control
;
1983 struct config_param
*config
;
1985 mac_control
= &nic
->mac_control
;
1986 config
= &nic
->config
;
1988 /* PRC Initialization and configuration */
1989 for (i
= 0; i
< config
->rx_ring_num
; i
++) {
1990 writeq((u64
) mac_control
->rings
[i
].rx_blocks
[0].block_dma_addr
,
1991 &bar0
->prc_rxd0_n
[i
]);
1993 val64
= readq(&bar0
->prc_ctrl_n
[i
]);
1994 if (nic
->config
.bimodal
)
1995 val64
|= PRC_CTRL_BIMODAL_INTERRUPT
;
1996 if (nic
->rxd_mode
== RXD_MODE_1
)
1997 val64
|= PRC_CTRL_RC_ENABLED
;
1999 val64
|= PRC_CTRL_RC_ENABLED
| PRC_CTRL_RING_MODE_3
;
2000 if (nic
->device_type
== XFRAME_II_DEVICE
)
2001 val64
|= PRC_CTRL_GROUP_READS
;
2002 val64
&= ~PRC_CTRL_RXD_BACKOFF_INTERVAL(0xFFFFFF);
2003 val64
|= PRC_CTRL_RXD_BACKOFF_INTERVAL(0x1000);
2004 writeq(val64
, &bar0
->prc_ctrl_n
[i
]);
2007 if (nic
->rxd_mode
== RXD_MODE_3B
) {
2008 /* Enabling 2 buffer mode by writing into Rx_pa_cfg reg. */
2009 val64
= readq(&bar0
->rx_pa_cfg
);
2010 val64
|= RX_PA_CFG_IGNORE_L2_ERR
;
2011 writeq(val64
, &bar0
->rx_pa_cfg
);
2015 * Enabling MC-RLDRAM. After enabling the device, we timeout
2016 * for around 100ms, which is approximately the time required
2017 * for the device to be ready for operation.
2019 val64
= readq(&bar0
->mc_rldram_mrs
);
2020 val64
|= MC_RLDRAM_QUEUE_SIZE_ENABLE
| MC_RLDRAM_MRS_ENABLE
;
2021 SPECIAL_REG_WRITE(val64
, &bar0
->mc_rldram_mrs
, UF
);
2022 val64
= readq(&bar0
->mc_rldram_mrs
);
2024 msleep(100); /* Delay by around 100 ms. */
2026 /* Enabling ECC Protection. */
2027 val64
= readq(&bar0
->adapter_control
);
2028 val64
&= ~ADAPTER_ECC_EN
;
2029 writeq(val64
, &bar0
->adapter_control
);
2032 * Clearing any possible Link state change interrupts that
2033 * could have popped up just before Enabling the card.
2035 val64
= readq(&bar0
->mac_rmac_err_reg
);
2037 writeq(val64
, &bar0
->mac_rmac_err_reg
);
2040 * Verify if the device is ready to be enabled, if so enable
2043 val64
= readq(&bar0
->adapter_status
);
2044 if (!verify_xena_quiescence(nic
, val64
, nic
->device_enabled_once
)) {
2045 DBG_PRINT(ERR_DBG
, "%s: device is not ready, ", dev
->name
);
2046 DBG_PRINT(ERR_DBG
, "Adapter status reads: 0x%llx\n",
2047 (unsigned long long) val64
);
2051 /* Enable select interrupts */
2052 if (nic
->intr_type
!= INTA
)
2053 en_dis_able_nic_intrs(nic
, ENA_ALL_INTRS
, DISABLE_INTRS
);
2055 interruptible
= TX_TRAFFIC_INTR
| RX_TRAFFIC_INTR
;
2056 interruptible
|= TX_PIC_INTR
| RX_PIC_INTR
;
2057 interruptible
|= TX_MAC_INTR
| RX_MAC_INTR
;
2058 en_dis_able_nic_intrs(nic
, interruptible
, ENABLE_INTRS
);
2062 * With some switches, link might be already up at this point.
2063 * Because of this weird behavior, when we enable laser,
2064 * we may not get link. We need to handle this. We cannot
2065 * figure out which switch is misbehaving. So we are forced to
2066 * make a global change.
2069 /* Enabling Laser. */
2070 val64
= readq(&bar0
->adapter_control
);
2071 val64
|= ADAPTER_EOI_TX_ON
;
2072 writeq(val64
, &bar0
->adapter_control
);
2074 if (s2io_link_fault_indication(nic
) == MAC_RMAC_ERR_TIMER
) {
2076 * Dont see link state interrupts initally on some switches,
2077 * so directly scheduling the link state task here.
2079 schedule_work(&nic
->set_link_task
);
2081 /* SXE-002: Initialize link and activity LED */
2082 subid
= nic
->pdev
->subsystem_device
;
2083 if (((subid
& 0xFF) >= 0x07) &&
2084 (nic
->device_type
== XFRAME_I_DEVICE
)) {
2085 val64
= readq(&bar0
->gpio_control
);
2086 val64
|= 0x0000800000000000ULL
;
2087 writeq(val64
, &bar0
->gpio_control
);
2088 val64
= 0x0411040400000000ULL
;
2089 writeq(val64
, (void __iomem
*)bar0
+ 0x2700);
2095 * s2io_txdl_getskb - Get the skb from txdl, unmap and return skb
2097 static struct sk_buff
*s2io_txdl_getskb(fifo_info_t
*fifo_data
, TxD_t
*txdlp
, int get_off
)
2099 nic_t
*nic
= fifo_data
->nic
;
2100 struct sk_buff
*skb
;
2105 if (txds
->Host_Control
== (u64
)(long)nic
->ufo_in_band_v
) {
2106 pci_unmap_single(nic
->pdev
, (dma_addr_t
)
2107 txds
->Buffer_Pointer
, sizeof(u64
),
2112 skb
= (struct sk_buff
*) ((unsigned long)
2113 txds
->Host_Control
);
2115 memset(txdlp
, 0, (sizeof(TxD_t
) * fifo_data
->max_txds
));
2118 pci_unmap_single(nic
->pdev
, (dma_addr_t
)
2119 txds
->Buffer_Pointer
,
2120 skb
->len
- skb
->data_len
,
2122 frg_cnt
= skb_shinfo(skb
)->nr_frags
;
2125 for (j
= 0; j
< frg_cnt
; j
++, txds
++) {
2126 skb_frag_t
*frag
= &skb_shinfo(skb
)->frags
[j
];
2127 if (!txds
->Buffer_Pointer
)
2129 pci_unmap_page(nic
->pdev
, (dma_addr_t
)
2130 txds
->Buffer_Pointer
,
2131 frag
->size
, PCI_DMA_TODEVICE
);
2134 txdlp
->Host_Control
= 0;
2139 * free_tx_buffers - Free all queued Tx buffers
2140 * @nic : device private variable.
2142 * Free all queued Tx buffers.
2143 * Return Value: void
2146 static void free_tx_buffers(struct s2io_nic
*nic
)
2148 struct net_device
*dev
= nic
->dev
;
2149 struct sk_buff
*skb
;
2152 mac_info_t
*mac_control
;
2153 struct config_param
*config
;
2156 mac_control
= &nic
->mac_control
;
2157 config
= &nic
->config
;
2159 for (i
= 0; i
< config
->tx_fifo_num
; i
++) {
2160 for (j
= 0; j
< config
->tx_cfg
[i
].fifo_len
- 1; j
++) {
2161 txdp
= (TxD_t
*) mac_control
->fifos
[i
].list_info
[j
].
2163 skb
= s2io_txdl_getskb(&mac_control
->fifos
[i
], txdp
, j
);
2170 "%s:forcibly freeing %d skbs on FIFO%d\n",
2172 mac_control
->fifos
[i
].tx_curr_get_info
.offset
= 0;
2173 mac_control
->fifos
[i
].tx_curr_put_info
.offset
= 0;
2178 * stop_nic - To stop the nic
2179 * @nic ; device private variable.
2181 * This function does exactly the opposite of what the start_nic()
2182 * function does. This function is called to stop the device.
2187 static void stop_nic(struct s2io_nic
*nic
)
2189 XENA_dev_config_t __iomem
*bar0
= nic
->bar0
;
2190 register u64 val64
= 0;
2192 mac_info_t
*mac_control
;
2193 struct config_param
*config
;
2195 mac_control
= &nic
->mac_control
;
2196 config
= &nic
->config
;
2198 /* Disable all interrupts */
2199 interruptible
= TX_TRAFFIC_INTR
| RX_TRAFFIC_INTR
;
2200 interruptible
|= TX_PIC_INTR
| RX_PIC_INTR
;
2201 interruptible
|= TX_MAC_INTR
| RX_MAC_INTR
;
2202 en_dis_able_nic_intrs(nic
, interruptible
, DISABLE_INTRS
);
2204 /* Clearing Adapter_En bit of ADAPTER_CONTROL Register */
2205 val64
= readq(&bar0
->adapter_control
);
2206 val64
&= ~(ADAPTER_CNTL_EN
);
2207 writeq(val64
, &bar0
->adapter_control
);
2210 static int fill_rxd_3buf(nic_t
*nic
, RxD_t
*rxdp
, struct sk_buff
*skb
)
2212 struct net_device
*dev
= nic
->dev
;
2213 struct sk_buff
*frag_list
;
2216 /* Buffer-1 receives L3/L4 headers */
2217 ((RxD3_t
*)rxdp
)->Buffer1_ptr
= pci_map_single
2218 (nic
->pdev
, skb
->data
, l3l4hdr_size
+ 4,
2219 PCI_DMA_FROMDEVICE
);
2221 /* skb_shinfo(skb)->frag_list will have L4 data payload */
2222 skb_shinfo(skb
)->frag_list
= dev_alloc_skb(dev
->mtu
+ ALIGN_SIZE
);
2223 if (skb_shinfo(skb
)->frag_list
== NULL
) {
2224 DBG_PRINT(ERR_DBG
, "%s: dev_alloc_skb failed\n ", dev
->name
);
2227 frag_list
= skb_shinfo(skb
)->frag_list
;
2228 frag_list
->next
= NULL
;
2229 tmp
= (void *)ALIGN((long)frag_list
->data
, ALIGN_SIZE
+ 1);
2230 frag_list
->data
= tmp
;
2231 frag_list
->tail
= tmp
;
2233 /* Buffer-2 receives L4 data payload */
2234 ((RxD3_t
*)rxdp
)->Buffer2_ptr
= pci_map_single(nic
->pdev
,
2235 frag_list
->data
, dev
->mtu
,
2236 PCI_DMA_FROMDEVICE
);
2237 rxdp
->Control_2
|= SET_BUFFER1_SIZE_3(l3l4hdr_size
+ 4);
2238 rxdp
->Control_2
|= SET_BUFFER2_SIZE_3(dev
->mtu
);
2244 * fill_rx_buffers - Allocates the Rx side skbs
2245 * @nic: device private variable
2246 * @ring_no: ring number
2248 * The function allocates Rx side skbs and puts the physical
2249 * address of these buffers into the RxD buffer pointers, so that the NIC
2250 * can DMA the received frame into these locations.
2251 * The NIC supports 3 receive modes, viz
2253 * 2. three buffer and
2254 * 3. Five buffer modes.
2255 * Each mode defines how many fragments the received frame will be split
2256 * up into by the NIC. The frame is split into L3 header, L4 Header,
2257 * L4 payload in three buffer mode and in 5 buffer mode, L4 payload itself
2258 * is split into 3 fragments. As of now only single buffer mode is
2261 * SUCCESS on success or an appropriate -ve value on failure.
2264 static int fill_rx_buffers(struct s2io_nic
*nic
, int ring_no
)
2266 struct net_device
*dev
= nic
->dev
;
2267 struct sk_buff
*skb
;
2269 int off
, off1
, size
, block_no
, block_no1
;
2272 mac_info_t
*mac_control
;
2273 struct config_param
*config
;
2276 #ifndef CONFIG_S2IO_NAPI
2277 unsigned long flags
;
2279 RxD_t
*first_rxdp
= NULL
;
2281 mac_control
= &nic
->mac_control
;
2282 config
= &nic
->config
;
2283 alloc_cnt
= mac_control
->rings
[ring_no
].pkt_cnt
-
2284 atomic_read(&nic
->rx_bufs_left
[ring_no
]);
2286 block_no1
= mac_control
->rings
[ring_no
].rx_curr_get_info
.block_index
;
2287 off1
= mac_control
->rings
[ring_no
].rx_curr_get_info
.offset
;
2288 while (alloc_tab
< alloc_cnt
) {
2289 block_no
= mac_control
->rings
[ring_no
].rx_curr_put_info
.
2291 off
= mac_control
->rings
[ring_no
].rx_curr_put_info
.offset
;
2293 rxdp
= mac_control
->rings
[ring_no
].
2294 rx_blocks
[block_no
].rxds
[off
].virt_addr
;
2296 if ((block_no
== block_no1
) && (off
== off1
) &&
2297 (rxdp
->Host_Control
)) {
2298 DBG_PRINT(INTR_DBG
, "%s: Get and Put",
2300 DBG_PRINT(INTR_DBG
, " info equated\n");
2303 if (off
&& (off
== rxd_count
[nic
->rxd_mode
])) {
2304 mac_control
->rings
[ring_no
].rx_curr_put_info
.
2306 if (mac_control
->rings
[ring_no
].rx_curr_put_info
.
2307 block_index
== mac_control
->rings
[ring_no
].
2309 mac_control
->rings
[ring_no
].rx_curr_put_info
.
2311 block_no
= mac_control
->rings
[ring_no
].
2312 rx_curr_put_info
.block_index
;
2313 if (off
== rxd_count
[nic
->rxd_mode
])
2315 mac_control
->rings
[ring_no
].rx_curr_put_info
.
2317 rxdp
= mac_control
->rings
[ring_no
].
2318 rx_blocks
[block_no
].block_virt_addr
;
2319 DBG_PRINT(INTR_DBG
, "%s: Next block at: %p\n",
2322 #ifndef CONFIG_S2IO_NAPI
2323 spin_lock_irqsave(&nic
->put_lock
, flags
);
2324 mac_control
->rings
[ring_no
].put_pos
=
2325 (block_no
* (rxd_count
[nic
->rxd_mode
] + 1)) + off
;
2326 spin_unlock_irqrestore(&nic
->put_lock
, flags
);
2328 if ((rxdp
->Control_1
& RXD_OWN_XENA
) &&
2329 ((nic
->rxd_mode
>= RXD_MODE_3A
) &&
2330 (rxdp
->Control_2
& BIT(0)))) {
2331 mac_control
->rings
[ring_no
].rx_curr_put_info
.
2335 /* calculate size of skb based on ring mode */
2336 size
= dev
->mtu
+ HEADER_ETHERNET_II_802_3_SIZE
+
2337 HEADER_802_2_SIZE
+ HEADER_SNAP_SIZE
;
2338 if (nic
->rxd_mode
== RXD_MODE_1
)
2339 size
+= NET_IP_ALIGN
;
2340 else if (nic
->rxd_mode
== RXD_MODE_3B
)
2341 size
= dev
->mtu
+ ALIGN_SIZE
+ BUF0_LEN
+ 4;
2343 size
= l3l4hdr_size
+ ALIGN_SIZE
+ BUF0_LEN
+ 4;
2346 skb
= dev_alloc_skb(size
);
2348 DBG_PRINT(ERR_DBG
, "%s: Out of ", dev
->name
);
2349 DBG_PRINT(ERR_DBG
, "memory to allocate SKBs\n");
2352 first_rxdp
->Control_1
|= RXD_OWN_XENA
;
2356 if (nic
->rxd_mode
== RXD_MODE_1
) {
2357 /* 1 buffer mode - normal operation mode */
2358 memset(rxdp
, 0, sizeof(RxD1_t
));
2359 skb_reserve(skb
, NET_IP_ALIGN
);
2360 ((RxD1_t
*)rxdp
)->Buffer0_ptr
= pci_map_single
2361 (nic
->pdev
, skb
->data
, size
- NET_IP_ALIGN
,
2362 PCI_DMA_FROMDEVICE
);
2363 rxdp
->Control_2
= SET_BUFFER0_SIZE_1(size
- NET_IP_ALIGN
);
2365 } else if (nic
->rxd_mode
>= RXD_MODE_3A
) {
2367 * 2 or 3 buffer mode -
2368 * Both 2 buffer mode and 3 buffer mode provides 128
2369 * byte aligned receive buffers.
2371 * 3 buffer mode provides header separation where in
2372 * skb->data will have L3/L4 headers where as
2373 * skb_shinfo(skb)->frag_list will have the L4 data
2377 memset(rxdp
, 0, sizeof(RxD3_t
));
2378 ba
= &mac_control
->rings
[ring_no
].ba
[block_no
][off
];
2379 skb_reserve(skb
, BUF0_LEN
);
2380 tmp
= (u64
)(unsigned long) skb
->data
;
2383 skb
->data
= (void *) (unsigned long)tmp
;
2384 skb
->tail
= (void *) (unsigned long)tmp
;
2386 ((RxD3_t
*)rxdp
)->Buffer0_ptr
=
2387 pci_map_single(nic
->pdev
, ba
->ba_0
, BUF0_LEN
,
2388 PCI_DMA_FROMDEVICE
);
2389 rxdp
->Control_2
= SET_BUFFER0_SIZE_3(BUF0_LEN
);
2390 if (nic
->rxd_mode
== RXD_MODE_3B
) {
2391 /* Two buffer mode */
2394 * Buffer2 will have L3/L4 header plus
2397 ((RxD3_t
*)rxdp
)->Buffer2_ptr
= pci_map_single
2398 (nic
->pdev
, skb
->data
, dev
->mtu
+ 4,
2399 PCI_DMA_FROMDEVICE
);
2401 /* Buffer-1 will be dummy buffer not used */
2402 ((RxD3_t
*)rxdp
)->Buffer1_ptr
=
2403 pci_map_single(nic
->pdev
, ba
->ba_1
, BUF1_LEN
,
2404 PCI_DMA_FROMDEVICE
);
2405 rxdp
->Control_2
|= SET_BUFFER1_SIZE_3(1);
2406 rxdp
->Control_2
|= SET_BUFFER2_SIZE_3
2410 if (fill_rxd_3buf(nic
, rxdp
, skb
) == -ENOMEM
) {
2411 dev_kfree_skb_irq(skb
);
2414 first_rxdp
->Control_1
|=
2420 rxdp
->Control_2
|= BIT(0);
2422 rxdp
->Host_Control
= (unsigned long) (skb
);
2423 if (alloc_tab
& ((1 << rxsync_frequency
) - 1))
2424 rxdp
->Control_1
|= RXD_OWN_XENA
;
2426 if (off
== (rxd_count
[nic
->rxd_mode
] + 1))
2428 mac_control
->rings
[ring_no
].rx_curr_put_info
.offset
= off
;
2430 rxdp
->Control_2
|= SET_RXD_MARKER
;
2431 if (!(alloc_tab
& ((1 << rxsync_frequency
) - 1))) {
2434 first_rxdp
->Control_1
|= RXD_OWN_XENA
;
2438 atomic_inc(&nic
->rx_bufs_left
[ring_no
]);
2443 /* Transfer ownership of first descriptor to adapter just before
2444 * exiting. Before that, use memory barrier so that ownership
2445 * and other fields are seen by adapter correctly.
2449 first_rxdp
->Control_1
|= RXD_OWN_XENA
;
2455 static void free_rxd_blk(struct s2io_nic
*sp
, int ring_no
, int blk
)
2457 struct net_device
*dev
= sp
->dev
;
2459 struct sk_buff
*skb
;
2461 mac_info_t
*mac_control
;
2464 mac_control
= &sp
->mac_control
;
2465 for (j
= 0 ; j
< rxd_count
[sp
->rxd_mode
]; j
++) {
2466 rxdp
= mac_control
->rings
[ring_no
].
2467 rx_blocks
[blk
].rxds
[j
].virt_addr
;
2468 skb
= (struct sk_buff
*)
2469 ((unsigned long) rxdp
->Host_Control
);
2473 if (sp
->rxd_mode
== RXD_MODE_1
) {
2474 pci_unmap_single(sp
->pdev
, (dma_addr_t
)
2475 ((RxD1_t
*)rxdp
)->Buffer0_ptr
,
2477 HEADER_ETHERNET_II_802_3_SIZE
2478 + HEADER_802_2_SIZE
+
2480 PCI_DMA_FROMDEVICE
);
2481 memset(rxdp
, 0, sizeof(RxD1_t
));
2482 } else if(sp
->rxd_mode
== RXD_MODE_3B
) {
2483 ba
= &mac_control
->rings
[ring_no
].
2485 pci_unmap_single(sp
->pdev
, (dma_addr_t
)
2486 ((RxD3_t
*)rxdp
)->Buffer0_ptr
,
2488 PCI_DMA_FROMDEVICE
);
2489 pci_unmap_single(sp
->pdev
, (dma_addr_t
)
2490 ((RxD3_t
*)rxdp
)->Buffer1_ptr
,
2492 PCI_DMA_FROMDEVICE
);
2493 pci_unmap_single(sp
->pdev
, (dma_addr_t
)
2494 ((RxD3_t
*)rxdp
)->Buffer2_ptr
,
2496 PCI_DMA_FROMDEVICE
);
2497 memset(rxdp
, 0, sizeof(RxD3_t
));
2499 pci_unmap_single(sp
->pdev
, (dma_addr_t
)
2500 ((RxD3_t
*)rxdp
)->Buffer0_ptr
, BUF0_LEN
,
2501 PCI_DMA_FROMDEVICE
);
2502 pci_unmap_single(sp
->pdev
, (dma_addr_t
)
2503 ((RxD3_t
*)rxdp
)->Buffer1_ptr
,
2505 PCI_DMA_FROMDEVICE
);
2506 pci_unmap_single(sp
->pdev
, (dma_addr_t
)
2507 ((RxD3_t
*)rxdp
)->Buffer2_ptr
, dev
->mtu
,
2508 PCI_DMA_FROMDEVICE
);
2509 memset(rxdp
, 0, sizeof(RxD3_t
));
2512 atomic_dec(&sp
->rx_bufs_left
[ring_no
]);
2517 * free_rx_buffers - Frees all Rx buffers
2518 * @sp: device private variable.
2520 * This function will free all Rx buffers allocated by host.
2525 static void free_rx_buffers(struct s2io_nic
*sp
)
2527 struct net_device
*dev
= sp
->dev
;
2528 int i
, blk
= 0, buf_cnt
= 0;
2529 mac_info_t
*mac_control
;
2530 struct config_param
*config
;
2532 mac_control
= &sp
->mac_control
;
2533 config
= &sp
->config
;
2535 for (i
= 0; i
< config
->rx_ring_num
; i
++) {
2536 for (blk
= 0; blk
< rx_ring_sz
[i
]; blk
++)
2537 free_rxd_blk(sp
,i
,blk
);
2539 mac_control
->rings
[i
].rx_curr_put_info
.block_index
= 0;
2540 mac_control
->rings
[i
].rx_curr_get_info
.block_index
= 0;
2541 mac_control
->rings
[i
].rx_curr_put_info
.offset
= 0;
2542 mac_control
->rings
[i
].rx_curr_get_info
.offset
= 0;
2543 atomic_set(&sp
->rx_bufs_left
[i
], 0);
2544 DBG_PRINT(INIT_DBG
, "%s:Freed 0x%x Rx Buffers on ring%d\n",
2545 dev
->name
, buf_cnt
, i
);
2550 * s2io_poll - Rx interrupt handler for NAPI support
2551 * @dev : pointer to the device structure.
2552 * @budget : The number of packets that were budgeted to be processed
2553 * during one pass through the 'Poll" function.
2555 * Comes into picture only if NAPI support has been incorporated. It does
2556 * the same thing that rx_intr_handler does, but not in a interrupt context
2557 * also It will process only a given number of packets.
2559 * 0 on success and 1 if there are No Rx packets to be processed.
2562 #if defined(CONFIG_S2IO_NAPI)
2563 static int s2io_poll(struct net_device
*dev
, int *budget
)
2565 nic_t
*nic
= dev
->priv
;
2566 int pkt_cnt
= 0, org_pkts_to_process
;
2567 mac_info_t
*mac_control
;
2568 struct config_param
*config
;
2569 XENA_dev_config_t __iomem
*bar0
= nic
->bar0
;
2570 u64 val64
= 0xFFFFFFFFFFFFFFFFULL
;
2573 atomic_inc(&nic
->isr_cnt
);
2574 mac_control
= &nic
->mac_control
;
2575 config
= &nic
->config
;
2577 nic
->pkts_to_process
= *budget
;
2578 if (nic
->pkts_to_process
> dev
->quota
)
2579 nic
->pkts_to_process
= dev
->quota
;
2580 org_pkts_to_process
= nic
->pkts_to_process
;
2582 writeq(val64
, &bar0
->rx_traffic_int
);
2583 val64
= readl(&bar0
->rx_traffic_int
);
2585 for (i
= 0; i
< config
->rx_ring_num
; i
++) {
2586 rx_intr_handler(&mac_control
->rings
[i
]);
2587 pkt_cnt
= org_pkts_to_process
- nic
->pkts_to_process
;
2588 if (!nic
->pkts_to_process
) {
2589 /* Quota for the current iteration has been met */
2596 dev
->quota
-= pkt_cnt
;
2598 netif_rx_complete(dev
);
2600 for (i
= 0; i
< config
->rx_ring_num
; i
++) {
2601 if (fill_rx_buffers(nic
, i
) == -ENOMEM
) {
2602 DBG_PRINT(ERR_DBG
, "%s:Out of memory", dev
->name
);
2603 DBG_PRINT(ERR_DBG
, " in Rx Poll!!\n");
2607 /* Re enable the Rx interrupts. */
2608 writeq(0x0, &bar0
->rx_traffic_mask
);
2609 val64
= readl(&bar0
->rx_traffic_mask
);
2610 atomic_dec(&nic
->isr_cnt
);
2614 dev
->quota
-= pkt_cnt
;
2617 for (i
= 0; i
< config
->rx_ring_num
; i
++) {
2618 if (fill_rx_buffers(nic
, i
) == -ENOMEM
) {
2619 DBG_PRINT(ERR_DBG
, "%s:Out of memory", dev
->name
);
2620 DBG_PRINT(ERR_DBG
, " in Rx Poll!!\n");
2624 atomic_dec(&nic
->isr_cnt
);
2630 * s2io_netpoll - Rx interrupt service handler for netpoll support
2631 * @dev : pointer to the device structure.
2633 * Polling 'interrupt' - used by things like netconsole to send skbs
2634 * without having to re-enable interrupts. It's not called while
2635 * the interrupt routine is executing.
2638 #ifdef CONFIG_NET_POLL_CONTROLLER
2639 static void s2io_netpoll(struct net_device
*dev
)
2641 nic_t
*nic
= dev
->priv
;
2642 mac_info_t
*mac_control
;
2643 struct config_param
*config
;
2644 XENA_dev_config_t __iomem
*bar0
= nic
->bar0
;
2648 disable_irq(dev
->irq
);
2650 atomic_inc(&nic
->isr_cnt
);
2651 mac_control
= &nic
->mac_control
;
2652 config
= &nic
->config
;
2654 val64
= readq(&bar0
->rx_traffic_int
);
2655 writeq(val64
, &bar0
->rx_traffic_int
);
2657 for (i
= 0; i
< config
->rx_ring_num
; i
++)
2658 rx_intr_handler(&mac_control
->rings
[i
]);
2660 for (i
= 0; i
< config
->rx_ring_num
; i
++) {
2661 if (fill_rx_buffers(nic
, i
) == -ENOMEM
) {
2662 DBG_PRINT(ERR_DBG
, "%s:Out of memory", dev
->name
);
2663 DBG_PRINT(ERR_DBG
, " in Rx Netpoll!!\n");
2667 atomic_dec(&nic
->isr_cnt
);
2668 enable_irq(dev
->irq
);
2674 * rx_intr_handler - Rx interrupt handler
2675 * @nic: device private variable.
2677 * If the interrupt is because of a received frame or if the
2678 * receive ring contains fresh as yet un-processed frames,this function is
2679 * called. It picks out the RxD at which place the last Rx processing had
2680 * stopped and sends the skb to the OSM's Rx handler and then increments
2685 static void rx_intr_handler(ring_info_t
*ring_data
)
2687 nic_t
*nic
= ring_data
->nic
;
2688 struct net_device
*dev
= (struct net_device
*) nic
->dev
;
2689 int get_block
, put_block
, put_offset
;
2690 rx_curr_get_info_t get_info
, put_info
;
2692 struct sk_buff
*skb
;
2693 #ifndef CONFIG_S2IO_NAPI
2698 spin_lock(&nic
->rx_lock
);
2699 if (atomic_read(&nic
->card_state
) == CARD_DOWN
) {
2700 DBG_PRINT(INTR_DBG
, "%s: %s going down for reset\n",
2701 __FUNCTION__
, dev
->name
);
2702 spin_unlock(&nic
->rx_lock
);
2706 get_info
= ring_data
->rx_curr_get_info
;
2707 get_block
= get_info
.block_index
;
2708 put_info
= ring_data
->rx_curr_put_info
;
2709 put_block
= put_info
.block_index
;
2710 rxdp
= ring_data
->rx_blocks
[get_block
].rxds
[get_info
.offset
].virt_addr
;
2711 #ifndef CONFIG_S2IO_NAPI
2712 spin_lock(&nic
->put_lock
);
2713 put_offset
= ring_data
->put_pos
;
2714 spin_unlock(&nic
->put_lock
);
2716 put_offset
= (put_block
* (rxd_count
[nic
->rxd_mode
] + 1)) +
2719 while (RXD_IS_UP2DT(rxdp
)) {
2720 /* If your are next to put index then it's FIFO full condition */
2721 if ((get_block
== put_block
) &&
2722 (get_info
.offset
+ 1) == put_info
.offset
) {
2723 DBG_PRINT(ERR_DBG
, "%s: Ring Full\n",dev
->name
);
2726 skb
= (struct sk_buff
*) ((unsigned long)rxdp
->Host_Control
);
2728 DBG_PRINT(ERR_DBG
, "%s: The skb is ",
2730 DBG_PRINT(ERR_DBG
, "Null in Rx Intr\n");
2731 spin_unlock(&nic
->rx_lock
);
2734 if (nic
->rxd_mode
== RXD_MODE_1
) {
2735 pci_unmap_single(nic
->pdev
, (dma_addr_t
)
2736 ((RxD1_t
*)rxdp
)->Buffer0_ptr
,
2738 HEADER_ETHERNET_II_802_3_SIZE
+
2741 PCI_DMA_FROMDEVICE
);
2742 } else if (nic
->rxd_mode
== RXD_MODE_3B
) {
2743 pci_unmap_single(nic
->pdev
, (dma_addr_t
)
2744 ((RxD3_t
*)rxdp
)->Buffer0_ptr
,
2745 BUF0_LEN
, PCI_DMA_FROMDEVICE
);
2746 pci_unmap_single(nic
->pdev
, (dma_addr_t
)
2747 ((RxD3_t
*)rxdp
)->Buffer1_ptr
,
2748 BUF1_LEN
, PCI_DMA_FROMDEVICE
);
2749 pci_unmap_single(nic
->pdev
, (dma_addr_t
)
2750 ((RxD3_t
*)rxdp
)->Buffer2_ptr
,
2752 PCI_DMA_FROMDEVICE
);
2754 pci_unmap_single(nic
->pdev
, (dma_addr_t
)
2755 ((RxD3_t
*)rxdp
)->Buffer0_ptr
, BUF0_LEN
,
2756 PCI_DMA_FROMDEVICE
);
2757 pci_unmap_single(nic
->pdev
, (dma_addr_t
)
2758 ((RxD3_t
*)rxdp
)->Buffer1_ptr
,
2760 PCI_DMA_FROMDEVICE
);
2761 pci_unmap_single(nic
->pdev
, (dma_addr_t
)
2762 ((RxD3_t
*)rxdp
)->Buffer2_ptr
,
2763 dev
->mtu
, PCI_DMA_FROMDEVICE
);
2765 prefetch(skb
->data
);
2766 rx_osm_handler(ring_data
, rxdp
);
2768 ring_data
->rx_curr_get_info
.offset
= get_info
.offset
;
2769 rxdp
= ring_data
->rx_blocks
[get_block
].
2770 rxds
[get_info
.offset
].virt_addr
;
2771 if (get_info
.offset
== rxd_count
[nic
->rxd_mode
]) {
2772 get_info
.offset
= 0;
2773 ring_data
->rx_curr_get_info
.offset
= get_info
.offset
;
2775 if (get_block
== ring_data
->block_count
)
2777 ring_data
->rx_curr_get_info
.block_index
= get_block
;
2778 rxdp
= ring_data
->rx_blocks
[get_block
].block_virt_addr
;
2781 #ifdef CONFIG_S2IO_NAPI
2782 nic
->pkts_to_process
-= 1;
2783 if (!nic
->pkts_to_process
)
2787 if ((indicate_max_pkts
) && (pkt_cnt
> indicate_max_pkts
))
2792 /* Clear all LRO sessions before exiting */
2793 for (i
=0; i
<MAX_LRO_SESSIONS
; i
++) {
2794 lro_t
*lro
= &nic
->lro0_n
[i
];
2796 update_L3L4_header(nic
, lro
);
2797 queue_rx_frame(lro
->parent
);
2798 clear_lro_session(lro
);
2803 spin_unlock(&nic
->rx_lock
);
2807 * tx_intr_handler - Transmit interrupt handler
2808 * @nic : device private variable
2810 * If an interrupt was raised to indicate DMA complete of the
2811 * Tx packet, this function is called. It identifies the last TxD
2812 * whose buffer was freed and frees all skbs whose data have already
2813 * DMA'ed into the NICs internal memory.
2818 static void tx_intr_handler(fifo_info_t
*fifo_data
)
2820 nic_t
*nic
= fifo_data
->nic
;
2821 struct net_device
*dev
= (struct net_device
*) nic
->dev
;
2822 tx_curr_get_info_t get_info
, put_info
;
2823 struct sk_buff
*skb
;
2826 get_info
= fifo_data
->tx_curr_get_info
;
2827 put_info
= fifo_data
->tx_curr_put_info
;
2828 txdlp
= (TxD_t
*) fifo_data
->list_info
[get_info
.offset
].
2830 while ((!(txdlp
->Control_1
& TXD_LIST_OWN_XENA
)) &&
2831 (get_info
.offset
!= put_info
.offset
) &&
2832 (txdlp
->Host_Control
)) {
2833 /* Check for TxD errors */
2834 if (txdlp
->Control_1
& TXD_T_CODE
) {
2835 unsigned long long err
;
2836 err
= txdlp
->Control_1
& TXD_T_CODE
;
2838 nic
->mac_control
.stats_info
->sw_stat
.
2841 if ((err
>> 48) == 0xA) {
2842 DBG_PRINT(TX_DBG
, "TxD returned due \
2843 to loss of link\n");
2846 DBG_PRINT(ERR_DBG
, "***TxD error \
2851 skb
= s2io_txdl_getskb(fifo_data
, txdlp
, get_info
.offset
);
2853 DBG_PRINT(ERR_DBG
, "%s: Null skb ",
2855 DBG_PRINT(ERR_DBG
, "in Tx Free Intr\n");
2859 /* Updating the statistics block */
2860 nic
->stats
.tx_bytes
+= skb
->len
;
2861 dev_kfree_skb_irq(skb
);
2864 if (get_info
.offset
== get_info
.fifo_len
+ 1)
2865 get_info
.offset
= 0;
2866 txdlp
= (TxD_t
*) fifo_data
->list_info
2867 [get_info
.offset
].list_virt_addr
;
2868 fifo_data
->tx_curr_get_info
.offset
=
2872 spin_lock(&nic
->tx_lock
);
2873 if (netif_queue_stopped(dev
))
2874 netif_wake_queue(dev
);
2875 spin_unlock(&nic
->tx_lock
);
2879 * s2io_mdio_write - Function to write in to MDIO registers
2880 * @mmd_type : MMD type value (PMA/PMD/WIS/PCS/PHYXS)
2881 * @addr : address value
2882 * @value : data value
2883 * @dev : pointer to net_device structure
2885 * This function is used to write values to the MDIO registers
2888 static void s2io_mdio_write(u32 mmd_type
, u64 addr
, u16 value
, struct net_device
*dev
)
2891 nic_t
*sp
= dev
->priv
;
2892 XENA_dev_config_t
*bar0
= (XENA_dev_config_t
*)sp
->bar0
;
2894 //address transaction
2895 val64
= val64
| MDIO_MMD_INDX_ADDR(addr
)
2896 | MDIO_MMD_DEV_ADDR(mmd_type
)
2897 | MDIO_MMS_PRT_ADDR(0x0);
2898 writeq(val64
, &bar0
->mdio_control
);
2899 val64
= val64
| MDIO_CTRL_START_TRANS(0xE);
2900 writeq(val64
, &bar0
->mdio_control
);
2905 val64
= val64
| MDIO_MMD_INDX_ADDR(addr
)
2906 | MDIO_MMD_DEV_ADDR(mmd_type
)
2907 | MDIO_MMS_PRT_ADDR(0x0)
2908 | MDIO_MDIO_DATA(value
)
2909 | MDIO_OP(MDIO_OP_WRITE_TRANS
);
2910 writeq(val64
, &bar0
->mdio_control
);
2911 val64
= val64
| MDIO_CTRL_START_TRANS(0xE);
2912 writeq(val64
, &bar0
->mdio_control
);
2916 val64
= val64
| MDIO_MMD_INDX_ADDR(addr
)
2917 | MDIO_MMD_DEV_ADDR(mmd_type
)
2918 | MDIO_MMS_PRT_ADDR(0x0)
2919 | MDIO_OP(MDIO_OP_READ_TRANS
);
2920 writeq(val64
, &bar0
->mdio_control
);
2921 val64
= val64
| MDIO_CTRL_START_TRANS(0xE);
2922 writeq(val64
, &bar0
->mdio_control
);
2928 * s2io_mdio_read - Function to write in to MDIO registers
2929 * @mmd_type : MMD type value (PMA/PMD/WIS/PCS/PHYXS)
2930 * @addr : address value
2931 * @dev : pointer to net_device structure
2933 * This function is used to read values to the MDIO registers
2936 static u64
s2io_mdio_read(u32 mmd_type
, u64 addr
, struct net_device
*dev
)
2940 nic_t
*sp
= dev
->priv
;
2941 XENA_dev_config_t
*bar0
= (XENA_dev_config_t
*)sp
->bar0
;
2943 /* address transaction */
2944 val64
= val64
| MDIO_MMD_INDX_ADDR(addr
)
2945 | MDIO_MMD_DEV_ADDR(mmd_type
)
2946 | MDIO_MMS_PRT_ADDR(0x0);
2947 writeq(val64
, &bar0
->mdio_control
);
2948 val64
= val64
| MDIO_CTRL_START_TRANS(0xE);
2949 writeq(val64
, &bar0
->mdio_control
);
2952 /* Data transaction */
2954 val64
= val64
| MDIO_MMD_INDX_ADDR(addr
)
2955 | MDIO_MMD_DEV_ADDR(mmd_type
)
2956 | MDIO_MMS_PRT_ADDR(0x0)
2957 | MDIO_OP(MDIO_OP_READ_TRANS
);
2958 writeq(val64
, &bar0
->mdio_control
);
2959 val64
= val64
| MDIO_CTRL_START_TRANS(0xE);
2960 writeq(val64
, &bar0
->mdio_control
);
2963 /* Read the value from regs */
2964 rval64
= readq(&bar0
->mdio_control
);
2965 rval64
= rval64
& 0xFFFF0000;
2966 rval64
= rval64
>> 16;
2970 * s2io_chk_xpak_counter - Function to check the status of the xpak counters
2971 * @counter : couter value to be updated
2972 * @flag : flag to indicate the status
2973 * @type : counter type
2975 * This function is to check the status of the xpak counters value
2979 static void s2io_chk_xpak_counter(u64
*counter
, u64
* regs_stat
, u32 index
, u16 flag
, u16 type
)
2984 for(i
= 0; i
<index
; i
++)
2989 *counter
= *counter
+ 1;
2990 val64
= *regs_stat
& mask
;
2991 val64
= val64
>> (index
* 0x2);
2998 DBG_PRINT(ERR_DBG
, "Take Xframe NIC out of "
2999 "service. Excessive temperatures may "
3000 "result in premature transceiver "
3004 DBG_PRINT(ERR_DBG
, "Take Xframe NIC out of "
3005 "service Excessive bias currents may "
3006 "indicate imminent laser diode "
3010 DBG_PRINT(ERR_DBG
, "Take Xframe NIC out of "
3011 "service Excessive laser output "
3012 "power may saturate far-end "
3016 DBG_PRINT(ERR_DBG
, "Incorrect XPAK Alarm "
3021 val64
= val64
<< (index
* 0x2);
3022 *regs_stat
= (*regs_stat
& (~mask
)) | (val64
);
3025 *regs_stat
= *regs_stat
& (~mask
);
3030 * s2io_updt_xpak_counter - Function to update the xpak counters
3031 * @dev : pointer to net_device struct
3033 * This function is to upate the status of the xpak counters value
3036 static void s2io_updt_xpak_counter(struct net_device
*dev
)
3044 nic_t
*sp
= dev
->priv
;
3045 StatInfo_t
*stat_info
= sp
->mac_control
.stats_info
;
3047 /* Check the communication with the MDIO slave */
3050 val64
= s2io_mdio_read(MDIO_MMD_PMA_DEV_ADDR
, addr
, dev
);
3051 if((val64
== 0xFFFF) || (val64
== 0x0000))
3053 DBG_PRINT(ERR_DBG
, "ERR: MDIO slave access failed - "
3054 "Returned %llx\n", (unsigned long long)val64
);
3058 /* Check for the expecte value of 2040 at PMA address 0x0000 */
3061 DBG_PRINT(ERR_DBG
, "Incorrect value at PMA address 0x0000 - ");
3062 DBG_PRINT(ERR_DBG
, "Returned: %llx- Expected: 0x2040\n",
3063 (unsigned long long)val64
);
3067 /* Loading the DOM register to MDIO register */
3069 s2io_mdio_write(MDIO_MMD_PMA_DEV_ADDR
, addr
, val16
, dev
);
3070 val64
= s2io_mdio_read(MDIO_MMD_PMA_DEV_ADDR
, addr
, dev
);
3072 /* Reading the Alarm flags */
3075 val64
= s2io_mdio_read(MDIO_MMD_PMA_DEV_ADDR
, addr
, dev
);
3077 flag
= CHECKBIT(val64
, 0x7);
3079 s2io_chk_xpak_counter(&stat_info
->xpak_stat
.alarm_transceiver_temp_high
,
3080 &stat_info
->xpak_stat
.xpak_regs_stat
,
3083 if(CHECKBIT(val64
, 0x6))
3084 stat_info
->xpak_stat
.alarm_transceiver_temp_low
++;
3086 flag
= CHECKBIT(val64
, 0x3);
3088 s2io_chk_xpak_counter(&stat_info
->xpak_stat
.alarm_laser_bias_current_high
,
3089 &stat_info
->xpak_stat
.xpak_regs_stat
,
3092 if(CHECKBIT(val64
, 0x2))
3093 stat_info
->xpak_stat
.alarm_laser_bias_current_low
++;
3095 flag
= CHECKBIT(val64
, 0x1);
3097 s2io_chk_xpak_counter(&stat_info
->xpak_stat
.alarm_laser_output_power_high
,
3098 &stat_info
->xpak_stat
.xpak_regs_stat
,
3101 if(CHECKBIT(val64
, 0x0))
3102 stat_info
->xpak_stat
.alarm_laser_output_power_low
++;
3104 /* Reading the Warning flags */
3107 val64
= s2io_mdio_read(MDIO_MMD_PMA_DEV_ADDR
, addr
, dev
);
3109 if(CHECKBIT(val64
, 0x7))
3110 stat_info
->xpak_stat
.warn_transceiver_temp_high
++;
3112 if(CHECKBIT(val64
, 0x6))
3113 stat_info
->xpak_stat
.warn_transceiver_temp_low
++;
3115 if(CHECKBIT(val64
, 0x3))
3116 stat_info
->xpak_stat
.warn_laser_bias_current_high
++;
3118 if(CHECKBIT(val64
, 0x2))
3119 stat_info
->xpak_stat
.warn_laser_bias_current_low
++;
3121 if(CHECKBIT(val64
, 0x1))
3122 stat_info
->xpak_stat
.warn_laser_output_power_high
++;
3124 if(CHECKBIT(val64
, 0x0))
3125 stat_info
->xpak_stat
.warn_laser_output_power_low
++;
3129 * alarm_intr_handler - Alarm Interrrupt handler
3130 * @nic: device private variable
3131 * Description: If the interrupt was neither because of Rx packet or Tx
3132 * complete, this function is called. If the interrupt was to indicate
3133 * a loss of link, the OSM link status handler is invoked for any other
3134 * alarm interrupt the block that raised the interrupt is displayed
3135 * and a H/W reset is issued.
3140 static void alarm_intr_handler(struct s2io_nic
*nic
)
3142 struct net_device
*dev
= (struct net_device
*) nic
->dev
;
3143 XENA_dev_config_t __iomem
*bar0
= nic
->bar0
;
3144 register u64 val64
= 0, err_reg
= 0;
3147 nic
->mac_control
.stats_info
->sw_stat
.ring_full_cnt
= 0;
3148 /* Handling the XPAK counters update */
3149 if(nic
->mac_control
.stats_info
->xpak_stat
.xpak_timer_count
< 72000) {
3150 /* waiting for an hour */
3151 nic
->mac_control
.stats_info
->xpak_stat
.xpak_timer_count
++;
3153 s2io_updt_xpak_counter(dev
);
3154 /* reset the count to zero */
3155 nic
->mac_control
.stats_info
->xpak_stat
.xpak_timer_count
= 0;
3158 /* Handling link status change error Intr */
3159 if (s2io_link_fault_indication(nic
) == MAC_RMAC_ERR_TIMER
) {
3160 err_reg
= readq(&bar0
->mac_rmac_err_reg
);
3161 writeq(err_reg
, &bar0
->mac_rmac_err_reg
);
3162 if (err_reg
& RMAC_LINK_STATE_CHANGE_INT
) {
3163 schedule_work(&nic
->set_link_task
);
3167 /* Handling Ecc errors */
3168 val64
= readq(&bar0
->mc_err_reg
);
3169 writeq(val64
, &bar0
->mc_err_reg
);
3170 if (val64
& (MC_ERR_REG_ECC_ALL_SNG
| MC_ERR_REG_ECC_ALL_DBL
)) {
3171 if (val64
& MC_ERR_REG_ECC_ALL_DBL
) {
3172 nic
->mac_control
.stats_info
->sw_stat
.
3174 DBG_PRINT(INIT_DBG
, "%s: Device indicates ",
3176 DBG_PRINT(INIT_DBG
, "double ECC error!!\n");
3177 if (nic
->device_type
!= XFRAME_II_DEVICE
) {
3178 /* Reset XframeI only if critical error */
3179 if (val64
& (MC_ERR_REG_MIRI_ECC_DB_ERR_0
|
3180 MC_ERR_REG_MIRI_ECC_DB_ERR_1
)) {
3181 netif_stop_queue(dev
);
3182 schedule_work(&nic
->rst_timer_task
);
3183 nic
->mac_control
.stats_info
->sw_stat
.
3188 nic
->mac_control
.stats_info
->sw_stat
.
3193 /* In case of a serious error, the device will be Reset. */
3194 val64
= readq(&bar0
->serr_source
);
3195 if (val64
& SERR_SOURCE_ANY
) {
3196 nic
->mac_control
.stats_info
->sw_stat
.serious_err_cnt
++;
3197 DBG_PRINT(ERR_DBG
, "%s: Device indicates ", dev
->name
);
3198 DBG_PRINT(ERR_DBG
, "serious error %llx!!\n",
3199 (unsigned long long)val64
);
3200 netif_stop_queue(dev
);
3201 schedule_work(&nic
->rst_timer_task
);
3202 nic
->mac_control
.stats_info
->sw_stat
.soft_reset_cnt
++;
3206 * Also as mentioned in the latest Errata sheets if the PCC_FB_ECC
3207 * Error occurs, the adapter will be recycled by disabling the
3208 * adapter enable bit and enabling it again after the device
3209 * becomes Quiescent.
3211 val64
= readq(&bar0
->pcc_err_reg
);
3212 writeq(val64
, &bar0
->pcc_err_reg
);
3213 if (val64
& PCC_FB_ECC_DB_ERR
) {
3214 u64 ac
= readq(&bar0
->adapter_control
);
3215 ac
&= ~(ADAPTER_CNTL_EN
);
3216 writeq(ac
, &bar0
->adapter_control
);
3217 ac
= readq(&bar0
->adapter_control
);
3218 schedule_work(&nic
->set_link_task
);
3220 /* Check for data parity error */
3221 val64
= readq(&bar0
->pic_int_status
);
3222 if (val64
& PIC_INT_GPIO
) {
3223 val64
= readq(&bar0
->gpio_int_reg
);
3224 if (val64
& GPIO_INT_REG_DP_ERR_INT
) {
3225 nic
->mac_control
.stats_info
->sw_stat
.parity_err_cnt
++;
3226 schedule_work(&nic
->rst_timer_task
);
3227 nic
->mac_control
.stats_info
->sw_stat
.soft_reset_cnt
++;
3231 /* Check for ring full counter */
3232 if (nic
->device_type
& XFRAME_II_DEVICE
) {
3233 val64
= readq(&bar0
->ring_bump_counter1
);
3234 for (i
=0; i
<4; i
++) {
3235 cnt
= ( val64
& vBIT(0xFFFF,(i
*16),16));
3236 cnt
>>= 64 - ((i
+1)*16);
3237 nic
->mac_control
.stats_info
->sw_stat
.ring_full_cnt
3241 val64
= readq(&bar0
->ring_bump_counter2
);
3242 for (i
=0; i
<4; i
++) {
3243 cnt
= ( val64
& vBIT(0xFFFF,(i
*16),16));
3244 cnt
>>= 64 - ((i
+1)*16);
3245 nic
->mac_control
.stats_info
->sw_stat
.ring_full_cnt
3250 /* Other type of interrupts are not being handled now, TODO */
3254 * wait_for_cmd_complete - waits for a command to complete.
3255 * @sp : private member of the device structure, which is a pointer to the
3256 * s2io_nic structure.
3257 * Description: Function that waits for a command to Write into RMAC
3258 * ADDR DATA registers to be completed and returns either success or
3259 * error depending on whether the command was complete or not.
3261 * SUCCESS on success and FAILURE on failure.
3264 static int wait_for_cmd_complete(void *addr
, u64 busy_bit
)
3266 int ret
= FAILURE
, cnt
= 0;
3270 val64
= readq(addr
);
3271 if (!(val64
& busy_bit
)) {
3288 * s2io_reset - Resets the card.
3289 * @sp : private member of the device structure.
3290 * Description: Function to Reset the card. This function then also
3291 * restores the previously saved PCI configuration space registers as
3292 * the card reset also resets the configuration space.
3297 static void s2io_reset(nic_t
* sp
)
3299 XENA_dev_config_t __iomem
*bar0
= sp
->bar0
;
3303 /* Back up the PCI-X CMD reg, dont want to lose MMRBC, OST settings */
3304 pci_read_config_word(sp
->pdev
, PCIX_COMMAND_REGISTER
, &(pci_cmd
));
3306 val64
= SW_RESET_ALL
;
3307 writeq(val64
, &bar0
->sw_reset
);
3310 * At this stage, if the PCI write is indeed completed, the
3311 * card is reset and so is the PCI Config space of the device.
3312 * So a read cannot be issued at this stage on any of the
3313 * registers to ensure the write into "sw_reset" register
3315 * Question: Is there any system call that will explicitly force
3316 * all the write commands still pending on the bus to be pushed
3318 * As of now I'am just giving a 250ms delay and hoping that the
3319 * PCI write to sw_reset register is done by this time.
3322 if (strstr(sp
->product_name
, "CX4")) {
3326 /* Restore the PCI state saved during initialization. */
3327 pci_restore_state(sp
->pdev
);
3328 pci_write_config_word(sp
->pdev
, PCIX_COMMAND_REGISTER
,
3334 /* Set swapper to enable I/O register access */
3335 s2io_set_swapper(sp
);
3337 /* Restore the MSIX table entries from local variables */
3338 restore_xmsi_data(sp
);
3340 /* Clear certain PCI/PCI-X fields after reset */
3341 if (sp
->device_type
== XFRAME_II_DEVICE
) {
3342 /* Clear parity err detect bit */
3343 pci_write_config_word(sp
->pdev
, PCI_STATUS
, 0x8000);
3345 /* Clearing PCIX Ecc status register */
3346 pci_write_config_dword(sp
->pdev
, 0x68, 0x7C);
3348 /* Clearing PCI_STATUS error reflected here */
3349 writeq(BIT(62), &bar0
->txpic_int_reg
);
3352 /* Reset device statistics maintained by OS */
3353 memset(&sp
->stats
, 0, sizeof (struct net_device_stats
));
3355 /* SXE-002: Configure link and activity LED to turn it off */
3356 subid
= sp
->pdev
->subsystem_device
;
3357 if (((subid
& 0xFF) >= 0x07) &&
3358 (sp
->device_type
== XFRAME_I_DEVICE
)) {
3359 val64
= readq(&bar0
->gpio_control
);
3360 val64
|= 0x0000800000000000ULL
;
3361 writeq(val64
, &bar0
->gpio_control
);
3362 val64
= 0x0411040400000000ULL
;
3363 writeq(val64
, (void __iomem
*)bar0
+ 0x2700);
3367 * Clear spurious ECC interrupts that would have occured on
3368 * XFRAME II cards after reset.
3370 if (sp
->device_type
== XFRAME_II_DEVICE
) {
3371 val64
= readq(&bar0
->pcc_err_reg
);
3372 writeq(val64
, &bar0
->pcc_err_reg
);
3375 sp
->device_enabled_once
= FALSE
;
3379 * s2io_set_swapper - to set the swapper controle on the card
3380 * @sp : private member of the device structure,
3381 * pointer to the s2io_nic structure.
3382 * Description: Function to set the swapper control on the card
3383 * correctly depending on the 'endianness' of the system.
3385 * SUCCESS on success and FAILURE on failure.
3388 static int s2io_set_swapper(nic_t
* sp
)
3390 struct net_device
*dev
= sp
->dev
;
3391 XENA_dev_config_t __iomem
*bar0
= sp
->bar0
;
3392 u64 val64
, valt
, valr
;
3395 * Set proper endian settings and verify the same by reading
3396 * the PIF Feed-back register.
3399 val64
= readq(&bar0
->pif_rd_swapper_fb
);
3400 if (val64
!= 0x0123456789ABCDEFULL
) {
3402 u64 value
[] = { 0xC30000C3C30000C3ULL
, /* FE=1, SE=1 */
3403 0x8100008181000081ULL
, /* FE=1, SE=0 */
3404 0x4200004242000042ULL
, /* FE=0, SE=1 */
3405 0}; /* FE=0, SE=0 */
3408 writeq(value
[i
], &bar0
->swapper_ctrl
);
3409 val64
= readq(&bar0
->pif_rd_swapper_fb
);
3410 if (val64
== 0x0123456789ABCDEFULL
)
3415 DBG_PRINT(ERR_DBG
, "%s: Endian settings are wrong, ",
3417 DBG_PRINT(ERR_DBG
, "feedback read %llx\n",
3418 (unsigned long long) val64
);
3423 valr
= readq(&bar0
->swapper_ctrl
);
3426 valt
= 0x0123456789ABCDEFULL
;
3427 writeq(valt
, &bar0
->xmsi_address
);
3428 val64
= readq(&bar0
->xmsi_address
);
3432 u64 value
[] = { 0x00C3C30000C3C300ULL
, /* FE=1, SE=1 */
3433 0x0081810000818100ULL
, /* FE=1, SE=0 */
3434 0x0042420000424200ULL
, /* FE=0, SE=1 */
3435 0}; /* FE=0, SE=0 */
3438 writeq((value
[i
] | valr
), &bar0
->swapper_ctrl
);
3439 writeq(valt
, &bar0
->xmsi_address
);
3440 val64
= readq(&bar0
->xmsi_address
);
3446 unsigned long long x
= val64
;
3447 DBG_PRINT(ERR_DBG
, "Write failed, Xmsi_addr ");
3448 DBG_PRINT(ERR_DBG
, "reads:0x%llx\n", x
);
3452 val64
= readq(&bar0
->swapper_ctrl
);
3453 val64
&= 0xFFFF000000000000ULL
;
3457 * The device by default set to a big endian format, so a
3458 * big endian driver need not set anything.
3460 val64
|= (SWAPPER_CTRL_TXP_FE
|
3461 SWAPPER_CTRL_TXP_SE
|
3462 SWAPPER_CTRL_TXD_R_FE
|
3463 SWAPPER_CTRL_TXD_W_FE
|
3464 SWAPPER_CTRL_TXF_R_FE
|
3465 SWAPPER_CTRL_RXD_R_FE
|
3466 SWAPPER_CTRL_RXD_W_FE
|
3467 SWAPPER_CTRL_RXF_W_FE
|
3468 SWAPPER_CTRL_XMSI_FE
|
3469 SWAPPER_CTRL_STATS_FE
| SWAPPER_CTRL_STATS_SE
);
3470 if (sp
->intr_type
== INTA
)
3471 val64
|= SWAPPER_CTRL_XMSI_SE
;
3472 writeq(val64
, &bar0
->swapper_ctrl
);
3475 * Initially we enable all bits to make it accessible by the
3476 * driver, then we selectively enable only those bits that
3479 val64
|= (SWAPPER_CTRL_TXP_FE
|
3480 SWAPPER_CTRL_TXP_SE
|
3481 SWAPPER_CTRL_TXD_R_FE
|
3482 SWAPPER_CTRL_TXD_R_SE
|
3483 SWAPPER_CTRL_TXD_W_FE
|
3484 SWAPPER_CTRL_TXD_W_SE
|
3485 SWAPPER_CTRL_TXF_R_FE
|
3486 SWAPPER_CTRL_RXD_R_FE
|
3487 SWAPPER_CTRL_RXD_R_SE
|
3488 SWAPPER_CTRL_RXD_W_FE
|
3489 SWAPPER_CTRL_RXD_W_SE
|
3490 SWAPPER_CTRL_RXF_W_FE
|
3491 SWAPPER_CTRL_XMSI_FE
|
3492 SWAPPER_CTRL_STATS_FE
| SWAPPER_CTRL_STATS_SE
);
3493 if (sp
->intr_type
== INTA
)
3494 val64
|= SWAPPER_CTRL_XMSI_SE
;
3495 writeq(val64
, &bar0
->swapper_ctrl
);
3497 val64
= readq(&bar0
->swapper_ctrl
);
3500 * Verifying if endian settings are accurate by reading a
3501 * feedback register.
3503 val64
= readq(&bar0
->pif_rd_swapper_fb
);
3504 if (val64
!= 0x0123456789ABCDEFULL
) {
3505 /* Endian settings are incorrect, calls for another dekko. */
3506 DBG_PRINT(ERR_DBG
, "%s: Endian settings are wrong, ",
3508 DBG_PRINT(ERR_DBG
, "feedback read %llx\n",
3509 (unsigned long long) val64
);
3516 static int wait_for_msix_trans(nic_t
*nic
, int i
)
3518 XENA_dev_config_t __iomem
*bar0
= nic
->bar0
;
3520 int ret
= 0, cnt
= 0;
3523 val64
= readq(&bar0
->xmsi_access
);
3524 if (!(val64
& BIT(15)))
3530 DBG_PRINT(ERR_DBG
, "XMSI # %d Access failed\n", i
);
3537 static void restore_xmsi_data(nic_t
*nic
)
3539 XENA_dev_config_t __iomem
*bar0
= nic
->bar0
;
3543 for (i
=0; i
< nic
->avail_msix_vectors
; i
++) {
3544 writeq(nic
->msix_info
[i
].addr
, &bar0
->xmsi_address
);
3545 writeq(nic
->msix_info
[i
].data
, &bar0
->xmsi_data
);
3546 val64
= (BIT(7) | BIT(15) | vBIT(i
, 26, 6));
3547 writeq(val64
, &bar0
->xmsi_access
);
3548 if (wait_for_msix_trans(nic
, i
)) {
3549 DBG_PRINT(ERR_DBG
, "failed in %s\n", __FUNCTION__
);
3555 static void store_xmsi_data(nic_t
*nic
)
3557 XENA_dev_config_t __iomem
*bar0
= nic
->bar0
;
3558 u64 val64
, addr
, data
;
3561 /* Store and display */
3562 for (i
=0; i
< nic
->avail_msix_vectors
; i
++) {
3563 val64
= (BIT(15) | vBIT(i
, 26, 6));
3564 writeq(val64
, &bar0
->xmsi_access
);
3565 if (wait_for_msix_trans(nic
, i
)) {
3566 DBG_PRINT(ERR_DBG
, "failed in %s\n", __FUNCTION__
);
3569 addr
= readq(&bar0
->xmsi_address
);
3570 data
= readq(&bar0
->xmsi_data
);
3572 nic
->msix_info
[i
].addr
= addr
;
3573 nic
->msix_info
[i
].data
= data
;
3578 int s2io_enable_msi(nic_t
*nic
)
3580 XENA_dev_config_t __iomem
*bar0
= nic
->bar0
;
3581 u16 msi_ctrl
, msg_val
;
3582 struct config_param
*config
= &nic
->config
;
3583 struct net_device
*dev
= nic
->dev
;
3584 u64 val64
, tx_mat
, rx_mat
;
3587 val64
= readq(&bar0
->pic_control
);
3589 writeq(val64
, &bar0
->pic_control
);
3591 err
= pci_enable_msi(nic
->pdev
);
3593 DBG_PRINT(ERR_DBG
, "%s: enabling MSI failed\n",
3599 * Enable MSI and use MSI-1 in stead of the standard MSI-0
3600 * for interrupt handling.
3602 pci_read_config_word(nic
->pdev
, 0x4c, &msg_val
);
3604 pci_write_config_word(nic
->pdev
, 0x4c, msg_val
);
3605 pci_read_config_word(nic
->pdev
, 0x4c, &msg_val
);
3607 pci_read_config_word(nic
->pdev
, 0x42, &msi_ctrl
);
3609 pci_write_config_word(nic
->pdev
, 0x42, msi_ctrl
);
3611 /* program MSI-1 into all usable Tx_Mat and Rx_Mat fields */
3612 tx_mat
= readq(&bar0
->tx_mat0_n
[0]);
3613 for (i
=0; i
<config
->tx_fifo_num
; i
++) {
3614 tx_mat
|= TX_MAT_SET(i
, 1);
3616 writeq(tx_mat
, &bar0
->tx_mat0_n
[0]);
3618 rx_mat
= readq(&bar0
->rx_mat
);
3619 for (i
=0; i
<config
->rx_ring_num
; i
++) {
3620 rx_mat
|= RX_MAT_SET(i
, 1);
3622 writeq(rx_mat
, &bar0
->rx_mat
);
3624 dev
->irq
= nic
->pdev
->irq
;
3628 static int s2io_enable_msi_x(nic_t
*nic
)
3630 XENA_dev_config_t __iomem
*bar0
= nic
->bar0
;
3632 u16 msi_control
; /* Temp variable */
3633 int ret
, i
, j
, msix_indx
= 1;
3635 nic
->entries
= kmalloc(MAX_REQUESTED_MSI_X
* sizeof(struct msix_entry
),
3637 if (nic
->entries
== NULL
) {
3638 DBG_PRINT(ERR_DBG
, "%s: Memory allocation failed\n", __FUNCTION__
);
3641 memset(nic
->entries
, 0, MAX_REQUESTED_MSI_X
* sizeof(struct msix_entry
));
3644 kmalloc(MAX_REQUESTED_MSI_X
* sizeof(struct s2io_msix_entry
),
3646 if (nic
->s2io_entries
== NULL
) {
3647 DBG_PRINT(ERR_DBG
, "%s: Memory allocation failed\n", __FUNCTION__
);
3648 kfree(nic
->entries
);
3651 memset(nic
->s2io_entries
, 0,
3652 MAX_REQUESTED_MSI_X
* sizeof(struct s2io_msix_entry
));
3654 for (i
=0; i
< MAX_REQUESTED_MSI_X
; i
++) {
3655 nic
->entries
[i
].entry
= i
;
3656 nic
->s2io_entries
[i
].entry
= i
;
3657 nic
->s2io_entries
[i
].arg
= NULL
;
3658 nic
->s2io_entries
[i
].in_use
= 0;
3661 tx_mat
= readq(&bar0
->tx_mat0_n
[0]);
3662 for (i
=0; i
<nic
->config
.tx_fifo_num
; i
++, msix_indx
++) {
3663 tx_mat
|= TX_MAT_SET(i
, msix_indx
);
3664 nic
->s2io_entries
[msix_indx
].arg
= &nic
->mac_control
.fifos
[i
];
3665 nic
->s2io_entries
[msix_indx
].type
= MSIX_FIFO_TYPE
;
3666 nic
->s2io_entries
[msix_indx
].in_use
= MSIX_FLG
;
3668 writeq(tx_mat
, &bar0
->tx_mat0_n
[0]);
3670 if (!nic
->config
.bimodal
) {
3671 rx_mat
= readq(&bar0
->rx_mat
);
3672 for (j
=0; j
<nic
->config
.rx_ring_num
; j
++, msix_indx
++) {
3673 rx_mat
|= RX_MAT_SET(j
, msix_indx
);
3674 nic
->s2io_entries
[msix_indx
].arg
= &nic
->mac_control
.rings
[j
];
3675 nic
->s2io_entries
[msix_indx
].type
= MSIX_RING_TYPE
;
3676 nic
->s2io_entries
[msix_indx
].in_use
= MSIX_FLG
;
3678 writeq(rx_mat
, &bar0
->rx_mat
);
3680 tx_mat
= readq(&bar0
->tx_mat0_n
[7]);
3681 for (j
=0; j
<nic
->config
.rx_ring_num
; j
++, msix_indx
++) {
3682 tx_mat
|= TX_MAT_SET(i
, msix_indx
);
3683 nic
->s2io_entries
[msix_indx
].arg
= &nic
->mac_control
.rings
[j
];
3684 nic
->s2io_entries
[msix_indx
].type
= MSIX_RING_TYPE
;
3685 nic
->s2io_entries
[msix_indx
].in_use
= MSIX_FLG
;
3687 writeq(tx_mat
, &bar0
->tx_mat0_n
[7]);
3690 nic
->avail_msix_vectors
= 0;
3691 ret
= pci_enable_msix(nic
->pdev
, nic
->entries
, MAX_REQUESTED_MSI_X
);
3692 /* We fail init if error or we get less vectors than min required */
3693 if (ret
>= (nic
->config
.tx_fifo_num
+ nic
->config
.rx_ring_num
+ 1)) {
3694 nic
->avail_msix_vectors
= ret
;
3695 ret
= pci_enable_msix(nic
->pdev
, nic
->entries
, ret
);
3698 DBG_PRINT(ERR_DBG
, "%s: Enabling MSIX failed\n", nic
->dev
->name
);
3699 kfree(nic
->entries
);
3700 kfree(nic
->s2io_entries
);
3701 nic
->entries
= NULL
;
3702 nic
->s2io_entries
= NULL
;
3703 nic
->avail_msix_vectors
= 0;
3706 if (!nic
->avail_msix_vectors
)
3707 nic
->avail_msix_vectors
= MAX_REQUESTED_MSI_X
;
3710 * To enable MSI-X, MSI also needs to be enabled, due to a bug
3711 * in the herc NIC. (Temp change, needs to be removed later)
3713 pci_read_config_word(nic
->pdev
, 0x42, &msi_control
);
3714 msi_control
|= 0x1; /* Enable MSI */
3715 pci_write_config_word(nic
->pdev
, 0x42, msi_control
);
3720 /* ********************************************************* *
3721 * Functions defined below concern the OS part of the driver *
3722 * ********************************************************* */
3725 * s2io_open - open entry point of the driver
3726 * @dev : pointer to the device structure.
3728 * This function is the open entry point of the driver. It mainly calls a
3729 * function to allocate Rx buffers and inserts them into the buffer
3730 * descriptors and then enables the Rx part of the NIC.
3732 * 0 on success and an appropriate (-)ve integer as defined in errno.h
3736 static int s2io_open(struct net_device
*dev
)
3738 nic_t
*sp
= dev
->priv
;
3742 * Make sure you have link off by default every time
3743 * Nic is initialized
3745 netif_carrier_off(dev
);
3746 sp
->last_link_state
= 0;
3748 /* Initialize H/W and enable interrupts */
3749 err
= s2io_card_up(sp
);
3751 DBG_PRINT(ERR_DBG
, "%s: H/W initialization failed\n",
3754 goto hw_init_failed
;
3756 goto hw_enable_failed
;
3759 /* Store the values of the MSIX table in the nic_t structure */
3760 store_xmsi_data(sp
);
3762 /* After proper initialization of H/W, register ISR */
3763 if (sp
->intr_type
== MSI
) {
3764 err
= request_irq((int) sp
->pdev
->irq
, s2io_msi_handle
,
3765 SA_SHIRQ
, sp
->name
, dev
);
3767 DBG_PRINT(ERR_DBG
, "%s: MSI registration \
3768 failed\n", dev
->name
);
3769 goto isr_registration_failed
;
3772 if (sp
->intr_type
== MSI_X
) {
3775 for (i
=1; (sp
->s2io_entries
[i
].in_use
== MSIX_FLG
); i
++) {
3776 if (sp
->s2io_entries
[i
].type
== MSIX_FIFO_TYPE
) {
3777 sprintf(sp
->desc1
, "%s:MSI-X-%d-TX",
3779 err
= request_irq(sp
->entries
[i
].vector
,
3780 s2io_msix_fifo_handle
, 0, sp
->desc1
,
3781 sp
->s2io_entries
[i
].arg
);
3782 DBG_PRINT(ERR_DBG
, "%s @ 0x%llx\n", sp
->desc1
,
3783 (unsigned long long)sp
->msix_info
[i
].addr
);
3785 sprintf(sp
->desc2
, "%s:MSI-X-%d-RX",
3787 err
= request_irq(sp
->entries
[i
].vector
,
3788 s2io_msix_ring_handle
, 0, sp
->desc2
,
3789 sp
->s2io_entries
[i
].arg
);
3790 DBG_PRINT(ERR_DBG
, "%s @ 0x%llx\n", sp
->desc2
,
3791 (unsigned long long)sp
->msix_info
[i
].addr
);
3794 DBG_PRINT(ERR_DBG
, "%s: MSI-X-%d registration \
3795 failed\n", dev
->name
, i
);
3796 DBG_PRINT(ERR_DBG
, "Returned: %d\n", err
);
3797 goto isr_registration_failed
;
3799 sp
->s2io_entries
[i
].in_use
= MSIX_REGISTERED_SUCCESS
;
3802 if (sp
->intr_type
== INTA
) {
3803 err
= request_irq((int) sp
->pdev
->irq
, s2io_isr
, SA_SHIRQ
,
3806 DBG_PRINT(ERR_DBG
, "%s: ISR registration failed\n",
3808 goto isr_registration_failed
;
3812 if (s2io_set_mac_addr(dev
, dev
->dev_addr
) == FAILURE
) {
3813 DBG_PRINT(ERR_DBG
, "Set Mac Address Failed\n");
3815 goto setting_mac_address_failed
;
3818 netif_start_queue(dev
);
3821 setting_mac_address_failed
:
3822 if (sp
->intr_type
!= MSI_X
)
3823 free_irq(sp
->pdev
->irq
, dev
);
3824 isr_registration_failed
:
3825 del_timer_sync(&sp
->alarm_timer
);
3826 if (sp
->intr_type
== MSI_X
) {
3828 u16 msi_control
; /* Temp variable */
3830 for (i
=1; (sp
->s2io_entries
[i
].in_use
==
3831 MSIX_REGISTERED_SUCCESS
); i
++) {
3832 int vector
= sp
->entries
[i
].vector
;
3833 void *arg
= sp
->s2io_entries
[i
].arg
;
3835 free_irq(vector
, arg
);
3837 pci_disable_msix(sp
->pdev
);
3840 pci_read_config_word(sp
->pdev
, 0x42, &msi_control
);
3841 msi_control
&= 0xFFFE; /* Disable MSI */
3842 pci_write_config_word(sp
->pdev
, 0x42, msi_control
);
3844 else if (sp
->intr_type
== MSI
)
3845 pci_disable_msi(sp
->pdev
);
3849 if (sp
->intr_type
== MSI_X
) {
3852 if (sp
->s2io_entries
)
3853 kfree(sp
->s2io_entries
);
3859 * s2io_close -close entry point of the driver
3860 * @dev : device pointer.
3862 * This is the stop entry point of the driver. It needs to undo exactly
3863 * whatever was done by the open entry point,thus it's usually referred to
3864 * as the close function.Among other things this function mainly stops the
3865 * Rx side of the NIC and frees all the Rx buffers in the Rx rings.
3867 * 0 on success and an appropriate (-)ve integer as defined in errno.h
3871 static int s2io_close(struct net_device
*dev
)
3873 nic_t
*sp
= dev
->priv
;
3875 flush_scheduled_work();
3876 netif_stop_queue(dev
);
3877 /* Reset card, kill tasklet and free Tx and Rx buffers. */
3878 s2io_card_down(sp
, 1);
3880 sp
->device_close_flag
= TRUE
; /* Device is shut down. */
3885 * s2io_xmit - Tx entry point of te driver
3886 * @skb : the socket buffer containing the Tx data.
3887 * @dev : device pointer.
3889 * This function is the Tx entry point of the driver. S2IO NIC supports
3890 * certain protocol assist features on Tx side, namely CSO, S/G, LSO.
3891 * NOTE: when device cant queue the pkt,just the trans_start variable will
3894 * 0 on success & 1 on failure.
3897 static int s2io_xmit(struct sk_buff
*skb
, struct net_device
*dev
)
3899 nic_t
*sp
= dev
->priv
;
3900 u16 frg_cnt
, frg_len
, i
, queue
, queue_len
, put_off
, get_off
;
3903 TxFIFO_element_t __iomem
*tx_fifo
;
3904 unsigned long flags
;
3909 int vlan_priority
= 0;
3910 mac_info_t
*mac_control
;
3911 struct config_param
*config
;
3913 mac_control
= &sp
->mac_control
;
3914 config
= &sp
->config
;
3916 DBG_PRINT(TX_DBG
, "%s: In Neterion Tx routine\n", dev
->name
);
3917 spin_lock_irqsave(&sp
->tx_lock
, flags
);
3918 if (atomic_read(&sp
->card_state
) == CARD_DOWN
) {
3919 DBG_PRINT(TX_DBG
, "%s: Card going down for reset\n",
3921 spin_unlock_irqrestore(&sp
->tx_lock
, flags
);
3928 /* Get Fifo number to Transmit based on vlan priority */
3929 if (sp
->vlgrp
&& vlan_tx_tag_present(skb
)) {
3930 vlan_tag
= vlan_tx_tag_get(skb
);
3931 vlan_priority
= vlan_tag
>> 13;
3932 queue
= config
->fifo_mapping
[vlan_priority
];
3935 put_off
= (u16
) mac_control
->fifos
[queue
].tx_curr_put_info
.offset
;
3936 get_off
= (u16
) mac_control
->fifos
[queue
].tx_curr_get_info
.offset
;
3937 txdp
= (TxD_t
*) mac_control
->fifos
[queue
].list_info
[put_off
].
3940 queue_len
= mac_control
->fifos
[queue
].tx_curr_put_info
.fifo_len
+ 1;
3941 /* Avoid "put" pointer going beyond "get" pointer */
3942 if (txdp
->Host_Control
||
3943 ((put_off
+1) == queue_len
? 0 : (put_off
+1)) == get_off
) {
3944 DBG_PRINT(TX_DBG
, "Error in xmit, No free TXDs.\n");
3945 netif_stop_queue(dev
);
3947 spin_unlock_irqrestore(&sp
->tx_lock
, flags
);
3951 /* A buffer with no data will be dropped */
3953 DBG_PRINT(TX_DBG
, "%s:Buffer has no data..\n", dev
->name
);
3955 spin_unlock_irqrestore(&sp
->tx_lock
, flags
);
3959 txdp
->Control_1
= 0;
3960 txdp
->Control_2
= 0;
3962 mss
= skb_shinfo(skb
)->tso_size
;
3964 txdp
->Control_1
|= TXD_TCP_LSO_EN
;
3965 txdp
->Control_1
|= TXD_TCP_LSO_MSS(mss
);
3968 if (skb
->ip_summed
== CHECKSUM_HW
) {
3970 (TXD_TX_CKO_IPV4_EN
| TXD_TX_CKO_TCP_EN
|
3973 txdp
->Control_1
|= TXD_GATHER_CODE_FIRST
;
3974 txdp
->Control_1
|= TXD_LIST_OWN_XENA
;
3975 txdp
->Control_2
|= config
->tx_intr_type
;
3977 if (sp
->vlgrp
&& vlan_tx_tag_present(skb
)) {
3978 txdp
->Control_2
|= TXD_VLAN_ENABLE
;
3979 txdp
->Control_2
|= TXD_VLAN_TAG(vlan_tag
);
3982 frg_len
= skb
->len
- skb
->data_len
;
3983 if (skb_shinfo(skb
)->ufo_size
) {
3986 ufo_size
= skb_shinfo(skb
)->ufo_size
;
3988 txdp
->Control_1
|= TXD_UFO_EN
;
3989 txdp
->Control_1
|= TXD_UFO_MSS(ufo_size
);
3990 txdp
->Control_1
|= TXD_BUFFER0_SIZE(8);
3992 sp
->ufo_in_band_v
[put_off
] =
3993 (u64
)skb_shinfo(skb
)->ip6_frag_id
;
3995 sp
->ufo_in_band_v
[put_off
] =
3996 (u64
)skb_shinfo(skb
)->ip6_frag_id
<< 32;
3998 txdp
->Host_Control
= (unsigned long)sp
->ufo_in_band_v
;
3999 txdp
->Buffer_Pointer
= pci_map_single(sp
->pdev
,
4001 sizeof(u64
), PCI_DMA_TODEVICE
);
4003 txdp
->Control_1
= 0;
4004 txdp
->Control_2
= 0;
4007 txdp
->Buffer_Pointer
= pci_map_single
4008 (sp
->pdev
, skb
->data
, frg_len
, PCI_DMA_TODEVICE
);
4009 txdp
->Host_Control
= (unsigned long) skb
;
4010 txdp
->Control_1
|= TXD_BUFFER0_SIZE(frg_len
);
4012 if (skb_shinfo(skb
)->ufo_size
)
4013 txdp
->Control_1
|= TXD_UFO_EN
;
4015 frg_cnt
= skb_shinfo(skb
)->nr_frags
;
4016 /* For fragmented SKB. */
4017 for (i
= 0; i
< frg_cnt
; i
++) {
4018 skb_frag_t
*frag
= &skb_shinfo(skb
)->frags
[i
];
4019 /* A '0' length fragment will be ignored */
4023 txdp
->Buffer_Pointer
= (u64
) pci_map_page
4024 (sp
->pdev
, frag
->page
, frag
->page_offset
,
4025 frag
->size
, PCI_DMA_TODEVICE
);
4026 txdp
->Control_1
= TXD_BUFFER0_SIZE(frag
->size
);
4027 if (skb_shinfo(skb
)->ufo_size
)
4028 txdp
->Control_1
|= TXD_UFO_EN
;
4030 txdp
->Control_1
|= TXD_GATHER_CODE_LAST
;
4032 if (skb_shinfo(skb
)->ufo_size
)
4033 frg_cnt
++; /* as Txd0 was used for inband header */
4035 tx_fifo
= mac_control
->tx_FIFO_start
[queue
];
4036 val64
= mac_control
->fifos
[queue
].list_info
[put_off
].list_phy_addr
;
4037 writeq(val64
, &tx_fifo
->TxDL_Pointer
);
4039 val64
= (TX_FIFO_LAST_TXD_NUM(frg_cnt
) | TX_FIFO_FIRST_LIST
|
4044 val64
|= TX_FIFO_SPECIAL_FUNC
;
4046 if (skb_shinfo(skb
)->ufo_size
)
4047 val64
|= TX_FIFO_SPECIAL_FUNC
;
4048 writeq(val64
, &tx_fifo
->List_Control
);
4053 if (put_off
== mac_control
->fifos
[queue
].tx_curr_put_info
.fifo_len
+ 1)
4055 mac_control
->fifos
[queue
].tx_curr_put_info
.offset
= put_off
;
4057 /* Avoid "put" pointer going beyond "get" pointer */
4058 if (((put_off
+1) == queue_len
? 0 : (put_off
+1)) == get_off
) {
4059 sp
->mac_control
.stats_info
->sw_stat
.fifo_full_cnt
++;
4061 "No free TxDs for xmit, Put: 0x%x Get:0x%x\n",
4063 netif_stop_queue(dev
);
4066 dev
->trans_start
= jiffies
;
4067 spin_unlock_irqrestore(&sp
->tx_lock
, flags
);
4073 s2io_alarm_handle(unsigned long data
)
4075 nic_t
*sp
= (nic_t
*)data
;
4077 alarm_intr_handler(sp
);
4078 mod_timer(&sp
->alarm_timer
, jiffies
+ HZ
/ 2);
4082 s2io_msi_handle(int irq
, void *dev_id
, struct pt_regs
*regs
)
4084 struct net_device
*dev
= (struct net_device
*) dev_id
;
4085 nic_t
*sp
= dev
->priv
;
4088 mac_info_t
*mac_control
;
4089 struct config_param
*config
;
4091 atomic_inc(&sp
->isr_cnt
);
4092 mac_control
= &sp
->mac_control
;
4093 config
= &sp
->config
;
4094 DBG_PRINT(INTR_DBG
, "%s: MSI handler\n", __FUNCTION__
);
4096 /* If Intr is because of Rx Traffic */
4097 for (i
= 0; i
< config
->rx_ring_num
; i
++)
4098 rx_intr_handler(&mac_control
->rings
[i
]);
4100 /* If Intr is because of Tx Traffic */
4101 for (i
= 0; i
< config
->tx_fifo_num
; i
++)
4102 tx_intr_handler(&mac_control
->fifos
[i
]);
4105 * If the Rx buffer count is below the panic threshold then
4106 * reallocate the buffers from the interrupt handler itself,
4107 * else schedule a tasklet to reallocate the buffers.
4109 for (i
= 0; i
< config
->rx_ring_num
; i
++) {
4111 int rxb_size
= atomic_read(&sp
->rx_bufs_left
[i
]);
4112 int level
= rx_buffer_level(sp
, rxb_size
, i
);
4114 if ((level
== PANIC
) && (!TASKLET_IN_USE
)) {
4115 DBG_PRINT(INTR_DBG
, "%s: Rx BD hit ",
4117 DBG_PRINT(INTR_DBG
, "PANIC levels\n");
4118 if ((ret
= fill_rx_buffers(sp
, i
)) == -ENOMEM
) {
4119 DBG_PRINT(ERR_DBG
, "%s:Out of memory",
4121 DBG_PRINT(ERR_DBG
, " in ISR!!\n");
4122 clear_bit(0, (&sp
->tasklet_status
));
4123 atomic_dec(&sp
->isr_cnt
);
4126 clear_bit(0, (&sp
->tasklet_status
));
4127 } else if (level
== LOW
) {
4128 tasklet_schedule(&sp
->task
);
4131 else if (fill_rx_buffers(sp
, i
) == -ENOMEM
) {
4132 DBG_PRINT(ERR_DBG
, "%s:Out of memory",
4134 DBG_PRINT(ERR_DBG
, " in Rx Intr!!\n");
4139 atomic_dec(&sp
->isr_cnt
);
4144 s2io_msix_ring_handle(int irq
, void *dev_id
, struct pt_regs
*regs
)
4146 ring_info_t
*ring
= (ring_info_t
*)dev_id
;
4147 nic_t
*sp
= ring
->nic
;
4148 struct net_device
*dev
= (struct net_device
*) dev_id
;
4149 int rxb_size
, level
, rng_n
;
4151 atomic_inc(&sp
->isr_cnt
);
4152 rx_intr_handler(ring
);
4154 rng_n
= ring
->ring_no
;
4156 rxb_size
= atomic_read(&sp
->rx_bufs_left
[rng_n
]);
4157 level
= rx_buffer_level(sp
, rxb_size
, rng_n
);
4159 if ((level
== PANIC
) && (!TASKLET_IN_USE
)) {
4161 DBG_PRINT(INTR_DBG
, "%s: Rx BD hit ", __FUNCTION__
);
4162 DBG_PRINT(INTR_DBG
, "PANIC levels\n");
4163 if ((ret
= fill_rx_buffers(sp
, rng_n
)) == -ENOMEM
) {
4164 DBG_PRINT(ERR_DBG
, "Out of memory in %s",
4166 clear_bit(0, (&sp
->tasklet_status
));
4169 clear_bit(0, (&sp
->tasklet_status
));
4170 } else if (level
== LOW
) {
4171 tasklet_schedule(&sp
->task
);
4174 else if (fill_rx_buffers(sp
, rng_n
) == -ENOMEM
) {
4175 DBG_PRINT(ERR_DBG
, "%s:Out of memory", dev
->name
);
4176 DBG_PRINT(ERR_DBG
, " in Rx Intr!!\n");
4179 atomic_dec(&sp
->isr_cnt
);
4185 s2io_msix_fifo_handle(int irq
, void *dev_id
, struct pt_regs
*regs
)
4187 fifo_info_t
*fifo
= (fifo_info_t
*)dev_id
;
4188 nic_t
*sp
= fifo
->nic
;
4190 atomic_inc(&sp
->isr_cnt
);
4191 tx_intr_handler(fifo
);
4192 atomic_dec(&sp
->isr_cnt
);
4195 static void s2io_txpic_intr_handle(nic_t
*sp
)
4197 XENA_dev_config_t __iomem
*bar0
= sp
->bar0
;
4200 val64
= readq(&bar0
->pic_int_status
);
4201 if (val64
& PIC_INT_GPIO
) {
4202 val64
= readq(&bar0
->gpio_int_reg
);
4203 if ((val64
& GPIO_INT_REG_LINK_DOWN
) &&
4204 (val64
& GPIO_INT_REG_LINK_UP
)) {
4206 * This is unstable state so clear both up/down
4207 * interrupt and adapter to re-evaluate the link state.
4209 val64
|= GPIO_INT_REG_LINK_DOWN
;
4210 val64
|= GPIO_INT_REG_LINK_UP
;
4211 writeq(val64
, &bar0
->gpio_int_reg
);
4212 val64
= readq(&bar0
->gpio_int_mask
);
4213 val64
&= ~(GPIO_INT_MASK_LINK_UP
|
4214 GPIO_INT_MASK_LINK_DOWN
);
4215 writeq(val64
, &bar0
->gpio_int_mask
);
4217 else if (val64
& GPIO_INT_REG_LINK_UP
) {
4218 val64
= readq(&bar0
->adapter_status
);
4219 if (verify_xena_quiescence(sp
, val64
,
4220 sp
->device_enabled_once
)) {
4221 /* Enable Adapter */
4222 val64
= readq(&bar0
->adapter_control
);
4223 val64
|= ADAPTER_CNTL_EN
;
4224 writeq(val64
, &bar0
->adapter_control
);
4225 val64
|= ADAPTER_LED_ON
;
4226 writeq(val64
, &bar0
->adapter_control
);
4227 if (!sp
->device_enabled_once
)
4228 sp
->device_enabled_once
= 1;
4230 s2io_link(sp
, LINK_UP
);
4232 * unmask link down interrupt and mask link-up
4235 val64
= readq(&bar0
->gpio_int_mask
);
4236 val64
&= ~GPIO_INT_MASK_LINK_DOWN
;
4237 val64
|= GPIO_INT_MASK_LINK_UP
;
4238 writeq(val64
, &bar0
->gpio_int_mask
);
4241 }else if (val64
& GPIO_INT_REG_LINK_DOWN
) {
4242 val64
= readq(&bar0
->adapter_status
);
4243 if (verify_xena_quiescence(sp
, val64
,
4244 sp
->device_enabled_once
)) {
4245 s2io_link(sp
, LINK_DOWN
);
4246 /* Link is down so unmaks link up interrupt */
4247 val64
= readq(&bar0
->gpio_int_mask
);
4248 val64
&= ~GPIO_INT_MASK_LINK_UP
;
4249 val64
|= GPIO_INT_MASK_LINK_DOWN
;
4250 writeq(val64
, &bar0
->gpio_int_mask
);
4254 val64
= readq(&bar0
->gpio_int_mask
);
4258 * s2io_isr - ISR handler of the device .
4259 * @irq: the irq of the device.
4260 * @dev_id: a void pointer to the dev structure of the NIC.
4261 * @pt_regs: pointer to the registers pushed on the stack.
4262 * Description: This function is the ISR handler of the device. It
4263 * identifies the reason for the interrupt and calls the relevant
4264 * service routines. As a contongency measure, this ISR allocates the
4265 * recv buffers, if their numbers are below the panic value which is
4266 * presently set to 25% of the original number of rcv buffers allocated.
4268 * IRQ_HANDLED: will be returned if IRQ was handled by this routine
4269 * IRQ_NONE: will be returned if interrupt is not from our device
4271 static irqreturn_t
s2io_isr(int irq
, void *dev_id
, struct pt_regs
*regs
)
4273 struct net_device
*dev
= (struct net_device
*) dev_id
;
4274 nic_t
*sp
= dev
->priv
;
4275 XENA_dev_config_t __iomem
*bar0
= sp
->bar0
;
4277 u64 reason
= 0, val64
, org_mask
;
4278 mac_info_t
*mac_control
;
4279 struct config_param
*config
;
4281 atomic_inc(&sp
->isr_cnt
);
4282 mac_control
= &sp
->mac_control
;
4283 config
= &sp
->config
;
4286 * Identify the cause for interrupt and call the appropriate
4287 * interrupt handler. Causes for the interrupt could be;
4291 * 4. Error in any functional blocks of the NIC.
4293 reason
= readq(&bar0
->general_int_status
);
4296 /* The interrupt was not raised by Xena. */
4297 atomic_dec(&sp
->isr_cnt
);
4301 val64
= 0xFFFFFFFFFFFFFFFFULL
;
4302 /* Store current mask before masking all interrupts */
4303 org_mask
= readq(&bar0
->general_int_mask
);
4304 writeq(val64
, &bar0
->general_int_mask
);
4306 #ifdef CONFIG_S2IO_NAPI
4307 if (reason
& GEN_INTR_RXTRAFFIC
) {
4308 if (netif_rx_schedule_prep(dev
)) {
4309 writeq(val64
, &bar0
->rx_traffic_mask
);
4310 __netif_rx_schedule(dev
);
4315 * Rx handler is called by default, without checking for the
4316 * cause of interrupt.
4317 * rx_traffic_int reg is an R1 register, writing all 1's
4318 * will ensure that the actual interrupt causing bit get's
4319 * cleared and hence a read can be avoided.
4321 writeq(val64
, &bar0
->rx_traffic_int
);
4322 for (i
= 0; i
< config
->rx_ring_num
; i
++) {
4323 rx_intr_handler(&mac_control
->rings
[i
]);
4328 * tx_traffic_int reg is an R1 register, writing all 1's
4329 * will ensure that the actual interrupt causing bit get's
4330 * cleared and hence a read can be avoided.
4332 writeq(val64
, &bar0
->tx_traffic_int
);
4334 for (i
= 0; i
< config
->tx_fifo_num
; i
++)
4335 tx_intr_handler(&mac_control
->fifos
[i
]);
4337 if (reason
& GEN_INTR_TXPIC
)
4338 s2io_txpic_intr_handle(sp
);
4340 * If the Rx buffer count is below the panic threshold then
4341 * reallocate the buffers from the interrupt handler itself,
4342 * else schedule a tasklet to reallocate the buffers.
4344 #ifndef CONFIG_S2IO_NAPI
4345 for (i
= 0; i
< config
->rx_ring_num
; i
++) {
4348 int rxb_size
= atomic_read(&sp
->rx_bufs_left
[i
]);
4349 int level
= rx_buffer_level(sp
, rxb_size
, i
);
4351 if ((level
== PANIC
) && (!TASKLET_IN_USE
)) {
4352 DBG_PRINT(INTR_DBG
, "%s: Rx BD hit ",
4354 DBG_PRINT(INTR_DBG
, "PANIC levels\n");
4355 if ((ret
= fill_rx_buffers(sp
, i
)) == -ENOMEM
) {
4356 DBG_PRINT(ERR_DBG
, "%s:Out of memory",
4358 DBG_PRINT(ERR_DBG
, " in ISR!!\n");
4359 clear_bit(0, (&sp
->tasklet_status
));
4360 atomic_dec(&sp
->isr_cnt
);
4361 writeq(org_mask
, &bar0
->general_int_mask
);
4364 clear_bit(0, (&sp
->tasklet_status
));
4365 } else if (level
== LOW
) {
4366 tasklet_schedule(&sp
->task
);
4369 else if (fill_rx_buffers(sp
, i
) == -ENOMEM
) {
4370 DBG_PRINT(ERR_DBG
, "%s:Out of memory",
4372 DBG_PRINT(ERR_DBG
, " in Rx intr!!\n");
4377 writeq(org_mask
, &bar0
->general_int_mask
);
4378 atomic_dec(&sp
->isr_cnt
);
4385 static void s2io_updt_stats(nic_t
*sp
)
4387 XENA_dev_config_t __iomem
*bar0
= sp
->bar0
;
4391 if (atomic_read(&sp
->card_state
) == CARD_UP
) {
4392 /* Apprx 30us on a 133 MHz bus */
4393 val64
= SET_UPDT_CLICKS(10) |
4394 STAT_CFG_ONE_SHOT_EN
| STAT_CFG_STAT_EN
;
4395 writeq(val64
, &bar0
->stat_cfg
);
4398 val64
= readq(&bar0
->stat_cfg
);
4399 if (!(val64
& BIT(0)))
4403 break; /* Updt failed */
4409 * s2io_get_stats - Updates the device statistics structure.
4410 * @dev : pointer to the device structure.
4412 * This function updates the device statistics structure in the s2io_nic
4413 * structure and returns a pointer to the same.
4415 * pointer to the updated net_device_stats structure.
4418 static struct net_device_stats
*s2io_get_stats(struct net_device
*dev
)
4420 nic_t
*sp
= dev
->priv
;
4421 mac_info_t
*mac_control
;
4422 struct config_param
*config
;
4425 mac_control
= &sp
->mac_control
;
4426 config
= &sp
->config
;
4428 /* Configure Stats for immediate updt */
4429 s2io_updt_stats(sp
);
4431 sp
->stats
.tx_packets
=
4432 le32_to_cpu(mac_control
->stats_info
->tmac_frms
);
4433 sp
->stats
.tx_errors
=
4434 le32_to_cpu(mac_control
->stats_info
->tmac_any_err_frms
);
4435 sp
->stats
.rx_errors
=
4436 le32_to_cpu(mac_control
->stats_info
->rmac_drop_frms
);
4437 sp
->stats
.multicast
=
4438 le32_to_cpu(mac_control
->stats_info
->rmac_vld_mcst_frms
);
4439 sp
->stats
.rx_length_errors
=
4440 le32_to_cpu(mac_control
->stats_info
->rmac_long_frms
);
4442 return (&sp
->stats
);
4446 * s2io_set_multicast - entry point for multicast address enable/disable.
4447 * @dev : pointer to the device structure
4449 * This function is a driver entry point which gets called by the kernel
4450 * whenever multicast addresses must be enabled/disabled. This also gets
4451 * called to set/reset promiscuous mode. Depending on the deivce flag, we
4452 * determine, if multicast address must be enabled or if promiscuous mode
4453 * is to be disabled etc.
4458 static void s2io_set_multicast(struct net_device
*dev
)
4461 struct dev_mc_list
*mclist
;
4462 nic_t
*sp
= dev
->priv
;
4463 XENA_dev_config_t __iomem
*bar0
= sp
->bar0
;
4464 u64 val64
= 0, multi_mac
= 0x010203040506ULL
, mask
=
4466 u64 dis_addr
= 0xffffffffffffULL
, mac_addr
= 0;
4469 if ((dev
->flags
& IFF_ALLMULTI
) && (!sp
->m_cast_flg
)) {
4470 /* Enable all Multicast addresses */
4471 writeq(RMAC_ADDR_DATA0_MEM_ADDR(multi_mac
),
4472 &bar0
->rmac_addr_data0_mem
);
4473 writeq(RMAC_ADDR_DATA1_MEM_MASK(mask
),
4474 &bar0
->rmac_addr_data1_mem
);
4475 val64
= RMAC_ADDR_CMD_MEM_WE
|
4476 RMAC_ADDR_CMD_MEM_STROBE_NEW_CMD
|
4477 RMAC_ADDR_CMD_MEM_OFFSET(MAC_MC_ALL_MC_ADDR_OFFSET
);
4478 writeq(val64
, &bar0
->rmac_addr_cmd_mem
);
4479 /* Wait till command completes */
4480 wait_for_cmd_complete(&bar0
->rmac_addr_cmd_mem
,
4481 RMAC_ADDR_CMD_MEM_STROBE_CMD_EXECUTING
);
4484 sp
->all_multi_pos
= MAC_MC_ALL_MC_ADDR_OFFSET
;
4485 } else if ((dev
->flags
& IFF_ALLMULTI
) && (sp
->m_cast_flg
)) {
4486 /* Disable all Multicast addresses */
4487 writeq(RMAC_ADDR_DATA0_MEM_ADDR(dis_addr
),
4488 &bar0
->rmac_addr_data0_mem
);
4489 writeq(RMAC_ADDR_DATA1_MEM_MASK(0x0),
4490 &bar0
->rmac_addr_data1_mem
);
4491 val64
= RMAC_ADDR_CMD_MEM_WE
|
4492 RMAC_ADDR_CMD_MEM_STROBE_NEW_CMD
|
4493 RMAC_ADDR_CMD_MEM_OFFSET(sp
->all_multi_pos
);
4494 writeq(val64
, &bar0
->rmac_addr_cmd_mem
);
4495 /* Wait till command completes */
4496 wait_for_cmd_complete(&bar0
->rmac_addr_cmd_mem
,
4497 RMAC_ADDR_CMD_MEM_STROBE_CMD_EXECUTING
);
4500 sp
->all_multi_pos
= 0;
4503 if ((dev
->flags
& IFF_PROMISC
) && (!sp
->promisc_flg
)) {
4504 /* Put the NIC into promiscuous mode */
4505 add
= &bar0
->mac_cfg
;
4506 val64
= readq(&bar0
->mac_cfg
);
4507 val64
|= MAC_CFG_RMAC_PROM_ENABLE
;
4509 writeq(RMAC_CFG_KEY(0x4C0D), &bar0
->rmac_cfg_key
);
4510 writel((u32
) val64
, add
);
4511 writeq(RMAC_CFG_KEY(0x4C0D), &bar0
->rmac_cfg_key
);
4512 writel((u32
) (val64
>> 32), (add
+ 4));
4514 val64
= readq(&bar0
->mac_cfg
);
4515 sp
->promisc_flg
= 1;
4516 DBG_PRINT(INFO_DBG
, "%s: entered promiscuous mode\n",
4518 } else if (!(dev
->flags
& IFF_PROMISC
) && (sp
->promisc_flg
)) {
4519 /* Remove the NIC from promiscuous mode */
4520 add
= &bar0
->mac_cfg
;
4521 val64
= readq(&bar0
->mac_cfg
);
4522 val64
&= ~MAC_CFG_RMAC_PROM_ENABLE
;
4524 writeq(RMAC_CFG_KEY(0x4C0D), &bar0
->rmac_cfg_key
);
4525 writel((u32
) val64
, add
);
4526 writeq(RMAC_CFG_KEY(0x4C0D), &bar0
->rmac_cfg_key
);
4527 writel((u32
) (val64
>> 32), (add
+ 4));
4529 val64
= readq(&bar0
->mac_cfg
);
4530 sp
->promisc_flg
= 0;
4531 DBG_PRINT(INFO_DBG
, "%s: left promiscuous mode\n",
4535 /* Update individual M_CAST address list */
4536 if ((!sp
->m_cast_flg
) && dev
->mc_count
) {
4538 (MAX_ADDRS_SUPPORTED
- MAC_MC_ADDR_START_OFFSET
- 1)) {
4539 DBG_PRINT(ERR_DBG
, "%s: No more Rx filters ",
4541 DBG_PRINT(ERR_DBG
, "can be added, please enable ");
4542 DBG_PRINT(ERR_DBG
, "ALL_MULTI instead\n");
4546 prev_cnt
= sp
->mc_addr_count
;
4547 sp
->mc_addr_count
= dev
->mc_count
;
4549 /* Clear out the previous list of Mc in the H/W. */
4550 for (i
= 0; i
< prev_cnt
; i
++) {
4551 writeq(RMAC_ADDR_DATA0_MEM_ADDR(dis_addr
),
4552 &bar0
->rmac_addr_data0_mem
);
4553 writeq(RMAC_ADDR_DATA1_MEM_MASK(0ULL),
4554 &bar0
->rmac_addr_data1_mem
);
4555 val64
= RMAC_ADDR_CMD_MEM_WE
|
4556 RMAC_ADDR_CMD_MEM_STROBE_NEW_CMD
|
4557 RMAC_ADDR_CMD_MEM_OFFSET
4558 (MAC_MC_ADDR_START_OFFSET
+ i
);
4559 writeq(val64
, &bar0
->rmac_addr_cmd_mem
);
4561 /* Wait for command completes */
4562 if (wait_for_cmd_complete(&bar0
->rmac_addr_cmd_mem
,
4563 RMAC_ADDR_CMD_MEM_STROBE_CMD_EXECUTING
)) {
4564 DBG_PRINT(ERR_DBG
, "%s: Adding ",
4566 DBG_PRINT(ERR_DBG
, "Multicasts failed\n");
4571 /* Create the new Rx filter list and update the same in H/W. */
4572 for (i
= 0, mclist
= dev
->mc_list
; i
< dev
->mc_count
;
4573 i
++, mclist
= mclist
->next
) {
4574 memcpy(sp
->usr_addrs
[i
].addr
, mclist
->dmi_addr
,
4577 for (j
= 0; j
< ETH_ALEN
; j
++) {
4578 mac_addr
|= mclist
->dmi_addr
[j
];
4582 writeq(RMAC_ADDR_DATA0_MEM_ADDR(mac_addr
),
4583 &bar0
->rmac_addr_data0_mem
);
4584 writeq(RMAC_ADDR_DATA1_MEM_MASK(0ULL),
4585 &bar0
->rmac_addr_data1_mem
);
4586 val64
= RMAC_ADDR_CMD_MEM_WE
|
4587 RMAC_ADDR_CMD_MEM_STROBE_NEW_CMD
|
4588 RMAC_ADDR_CMD_MEM_OFFSET
4589 (i
+ MAC_MC_ADDR_START_OFFSET
);
4590 writeq(val64
, &bar0
->rmac_addr_cmd_mem
);
4592 /* Wait for command completes */
4593 if (wait_for_cmd_complete(&bar0
->rmac_addr_cmd_mem
,
4594 RMAC_ADDR_CMD_MEM_STROBE_CMD_EXECUTING
)) {
4595 DBG_PRINT(ERR_DBG
, "%s: Adding ",
4597 DBG_PRINT(ERR_DBG
, "Multicasts failed\n");
4605 * s2io_set_mac_addr - Programs the Xframe mac address
4606 * @dev : pointer to the device structure.
4607 * @addr: a uchar pointer to the new mac address which is to be set.
4608 * Description : This procedure will program the Xframe to receive
4609 * frames with new Mac Address
4610 * Return value: SUCCESS on success and an appropriate (-)ve integer
4611 * as defined in errno.h file on failure.
4614 static int s2io_set_mac_addr(struct net_device
*dev
, u8
* addr
)
4616 nic_t
*sp
= dev
->priv
;
4617 XENA_dev_config_t __iomem
*bar0
= sp
->bar0
;
4618 register u64 val64
, mac_addr
= 0;
4622 * Set the new MAC address as the new unicast filter and reflect this
4623 * change on the device address registered with the OS. It will be
4626 for (i
= 0; i
< ETH_ALEN
; i
++) {
4628 mac_addr
|= addr
[i
];
4631 writeq(RMAC_ADDR_DATA0_MEM_ADDR(mac_addr
),
4632 &bar0
->rmac_addr_data0_mem
);
4635 RMAC_ADDR_CMD_MEM_WE
| RMAC_ADDR_CMD_MEM_STROBE_NEW_CMD
|
4636 RMAC_ADDR_CMD_MEM_OFFSET(0);
4637 writeq(val64
, &bar0
->rmac_addr_cmd_mem
);
4638 /* Wait till command completes */
4639 if (wait_for_cmd_complete(&bar0
->rmac_addr_cmd_mem
,
4640 RMAC_ADDR_CMD_MEM_STROBE_CMD_EXECUTING
)) {
4641 DBG_PRINT(ERR_DBG
, "%s: set_mac_addr failed\n", dev
->name
);
4649 * s2io_ethtool_sset - Sets different link parameters.
4650 * @sp : private member of the device structure, which is a pointer to the * s2io_nic structure.
4651 * @info: pointer to the structure with parameters given by ethtool to set
4654 * The function sets different link parameters provided by the user onto
4660 static int s2io_ethtool_sset(struct net_device
*dev
,
4661 struct ethtool_cmd
*info
)
4663 nic_t
*sp
= dev
->priv
;
4664 if ((info
->autoneg
== AUTONEG_ENABLE
) ||
4665 (info
->speed
!= SPEED_10000
) || (info
->duplex
!= DUPLEX_FULL
))
4668 s2io_close(sp
->dev
);
4676 * s2io_ethtol_gset - Return link specific information.
4677 * @sp : private member of the device structure, pointer to the
4678 * s2io_nic structure.
4679 * @info : pointer to the structure with parameters given by ethtool
4680 * to return link information.
4682 * Returns link specific information like speed, duplex etc.. to ethtool.
4684 * return 0 on success.
4687 static int s2io_ethtool_gset(struct net_device
*dev
, struct ethtool_cmd
*info
)
4689 nic_t
*sp
= dev
->priv
;
4690 info
->supported
= (SUPPORTED_10000baseT_Full
| SUPPORTED_FIBRE
);
4691 info
->advertising
= (SUPPORTED_10000baseT_Full
| SUPPORTED_FIBRE
);
4692 info
->port
= PORT_FIBRE
;
4693 /* info->transceiver?? TODO */
4695 if (netif_carrier_ok(sp
->dev
)) {
4696 info
->speed
= 10000;
4697 info
->duplex
= DUPLEX_FULL
;
4703 info
->autoneg
= AUTONEG_DISABLE
;
4708 * s2io_ethtool_gdrvinfo - Returns driver specific information.
4709 * @sp : private member of the device structure, which is a pointer to the
4710 * s2io_nic structure.
4711 * @info : pointer to the structure with parameters given by ethtool to
4712 * return driver information.
4714 * Returns driver specefic information like name, version etc.. to ethtool.
4719 static void s2io_ethtool_gdrvinfo(struct net_device
*dev
,
4720 struct ethtool_drvinfo
*info
)
4722 nic_t
*sp
= dev
->priv
;
4724 strncpy(info
->driver
, s2io_driver_name
, sizeof(info
->driver
));
4725 strncpy(info
->version
, s2io_driver_version
, sizeof(info
->version
));
4726 strncpy(info
->fw_version
, "", sizeof(info
->fw_version
));
4727 strncpy(info
->bus_info
, pci_name(sp
->pdev
), sizeof(info
->bus_info
));
4728 info
->regdump_len
= XENA_REG_SPACE
;
4729 info
->eedump_len
= XENA_EEPROM_SPACE
;
4730 info
->testinfo_len
= S2IO_TEST_LEN
;
4731 info
->n_stats
= S2IO_STAT_LEN
;
4735 * s2io_ethtool_gregs - dumps the entire space of Xfame into the buffer.
4736 * @sp: private member of the device structure, which is a pointer to the
4737 * s2io_nic structure.
4738 * @regs : pointer to the structure with parameters given by ethtool for
4739 * dumping the registers.
4740 * @reg_space: The input argumnet into which all the registers are dumped.
4742 * Dumps the entire register space of xFrame NIC into the user given
4748 static void s2io_ethtool_gregs(struct net_device
*dev
,
4749 struct ethtool_regs
*regs
, void *space
)
4753 u8
*reg_space
= (u8
*) space
;
4754 nic_t
*sp
= dev
->priv
;
4756 regs
->len
= XENA_REG_SPACE
;
4757 regs
->version
= sp
->pdev
->subsystem_device
;
4759 for (i
= 0; i
< regs
->len
; i
+= 8) {
4760 reg
= readq(sp
->bar0
+ i
);
4761 memcpy((reg_space
+ i
), ®
, 8);
4766 * s2io_phy_id - timer function that alternates adapter LED.
4767 * @data : address of the private member of the device structure, which
4768 * is a pointer to the s2io_nic structure, provided as an u32.
4769 * Description: This is actually the timer function that alternates the
4770 * adapter LED bit of the adapter control bit to set/reset every time on
4771 * invocation. The timer is set for 1/2 a second, hence tha NIC blinks
4772 * once every second.
4774 static void s2io_phy_id(unsigned long data
)
4776 nic_t
*sp
= (nic_t
*) data
;
4777 XENA_dev_config_t __iomem
*bar0
= sp
->bar0
;
4781 subid
= sp
->pdev
->subsystem_device
;
4782 if ((sp
->device_type
== XFRAME_II_DEVICE
) ||
4783 ((subid
& 0xFF) >= 0x07)) {
4784 val64
= readq(&bar0
->gpio_control
);
4785 val64
^= GPIO_CTRL_GPIO_0
;
4786 writeq(val64
, &bar0
->gpio_control
);
4788 val64
= readq(&bar0
->adapter_control
);
4789 val64
^= ADAPTER_LED_ON
;
4790 writeq(val64
, &bar0
->adapter_control
);
4793 mod_timer(&sp
->id_timer
, jiffies
+ HZ
/ 2);
4797 * s2io_ethtool_idnic - To physically identify the nic on the system.
4798 * @sp : private member of the device structure, which is a pointer to the
4799 * s2io_nic structure.
4800 * @id : pointer to the structure with identification parameters given by
4802 * Description: Used to physically identify the NIC on the system.
4803 * The Link LED will blink for a time specified by the user for
4805 * NOTE: The Link has to be Up to be able to blink the LED. Hence
4806 * identification is possible only if it's link is up.
4808 * int , returns 0 on success
4811 static int s2io_ethtool_idnic(struct net_device
*dev
, u32 data
)
4813 u64 val64
= 0, last_gpio_ctrl_val
;
4814 nic_t
*sp
= dev
->priv
;
4815 XENA_dev_config_t __iomem
*bar0
= sp
->bar0
;
4818 subid
= sp
->pdev
->subsystem_device
;
4819 last_gpio_ctrl_val
= readq(&bar0
->gpio_control
);
4820 if ((sp
->device_type
== XFRAME_I_DEVICE
) &&
4821 ((subid
& 0xFF) < 0x07)) {
4822 val64
= readq(&bar0
->adapter_control
);
4823 if (!(val64
& ADAPTER_CNTL_EN
)) {
4825 "Adapter Link down, cannot blink LED\n");
4829 if (sp
->id_timer
.function
== NULL
) {
4830 init_timer(&sp
->id_timer
);
4831 sp
->id_timer
.function
= s2io_phy_id
;
4832 sp
->id_timer
.data
= (unsigned long) sp
;
4834 mod_timer(&sp
->id_timer
, jiffies
);
4836 msleep_interruptible(data
* HZ
);
4838 msleep_interruptible(MAX_FLICKER_TIME
);
4839 del_timer_sync(&sp
->id_timer
);
4841 if (CARDS_WITH_FAULTY_LINK_INDICATORS(sp
->device_type
, subid
)) {
4842 writeq(last_gpio_ctrl_val
, &bar0
->gpio_control
);
4843 last_gpio_ctrl_val
= readq(&bar0
->gpio_control
);
4850 * s2io_ethtool_getpause_data -Pause frame frame generation and reception.
4851 * @sp : private member of the device structure, which is a pointer to the
4852 * s2io_nic structure.
4853 * @ep : pointer to the structure with pause parameters given by ethtool.
4855 * Returns the Pause frame generation and reception capability of the NIC.
4859 static void s2io_ethtool_getpause_data(struct net_device
*dev
,
4860 struct ethtool_pauseparam
*ep
)
4863 nic_t
*sp
= dev
->priv
;
4864 XENA_dev_config_t __iomem
*bar0
= sp
->bar0
;
4866 val64
= readq(&bar0
->rmac_pause_cfg
);
4867 if (val64
& RMAC_PAUSE_GEN_ENABLE
)
4868 ep
->tx_pause
= TRUE
;
4869 if (val64
& RMAC_PAUSE_RX_ENABLE
)
4870 ep
->rx_pause
= TRUE
;
4871 ep
->autoneg
= FALSE
;
4875 * s2io_ethtool_setpause_data - set/reset pause frame generation.
4876 * @sp : private member of the device structure, which is a pointer to the
4877 * s2io_nic structure.
4878 * @ep : pointer to the structure with pause parameters given by ethtool.
4880 * It can be used to set or reset Pause frame generation or reception
4881 * support of the NIC.
4883 * int, returns 0 on Success
4886 static int s2io_ethtool_setpause_data(struct net_device
*dev
,
4887 struct ethtool_pauseparam
*ep
)
4890 nic_t
*sp
= dev
->priv
;
4891 XENA_dev_config_t __iomem
*bar0
= sp
->bar0
;
4893 val64
= readq(&bar0
->rmac_pause_cfg
);
4895 val64
|= RMAC_PAUSE_GEN_ENABLE
;
4897 val64
&= ~RMAC_PAUSE_GEN_ENABLE
;
4899 val64
|= RMAC_PAUSE_RX_ENABLE
;
4901 val64
&= ~RMAC_PAUSE_RX_ENABLE
;
4902 writeq(val64
, &bar0
->rmac_pause_cfg
);
4907 * read_eeprom - reads 4 bytes of data from user given offset.
4908 * @sp : private member of the device structure, which is a pointer to the
4909 * s2io_nic structure.
4910 * @off : offset at which the data must be written
4911 * @data : Its an output parameter where the data read at the given
4914 * Will read 4 bytes of data from the user given offset and return the
4916 * NOTE: Will allow to read only part of the EEPROM visible through the
4919 * -1 on failure and 0 on success.
4922 #define S2IO_DEV_ID 5
4923 static int read_eeprom(nic_t
* sp
, int off
, u64
* data
)
4928 XENA_dev_config_t __iomem
*bar0
= sp
->bar0
;
4930 if (sp
->device_type
== XFRAME_I_DEVICE
) {
4931 val64
= I2C_CONTROL_DEV_ID(S2IO_DEV_ID
) | I2C_CONTROL_ADDR(off
) |
4932 I2C_CONTROL_BYTE_CNT(0x3) | I2C_CONTROL_READ
|
4933 I2C_CONTROL_CNTL_START
;
4934 SPECIAL_REG_WRITE(val64
, &bar0
->i2c_control
, LF
);
4936 while (exit_cnt
< 5) {
4937 val64
= readq(&bar0
->i2c_control
);
4938 if (I2C_CONTROL_CNTL_END(val64
)) {
4939 *data
= I2C_CONTROL_GET_DATA(val64
);
4948 if (sp
->device_type
== XFRAME_II_DEVICE
) {
4949 val64
= SPI_CONTROL_KEY(0x9) | SPI_CONTROL_SEL1
|
4950 SPI_CONTROL_BYTECNT(0x3) |
4951 SPI_CONTROL_CMD(0x3) | SPI_CONTROL_ADDR(off
);
4952 SPECIAL_REG_WRITE(val64
, &bar0
->spi_control
, LF
);
4953 val64
|= SPI_CONTROL_REQ
;
4954 SPECIAL_REG_WRITE(val64
, &bar0
->spi_control
, LF
);
4955 while (exit_cnt
< 5) {
4956 val64
= readq(&bar0
->spi_control
);
4957 if (val64
& SPI_CONTROL_NACK
) {
4960 } else if (val64
& SPI_CONTROL_DONE
) {
4961 *data
= readq(&bar0
->spi_data
);
4974 * write_eeprom - actually writes the relevant part of the data value.
4975 * @sp : private member of the device structure, which is a pointer to the
4976 * s2io_nic structure.
4977 * @off : offset at which the data must be written
4978 * @data : The data that is to be written
4979 * @cnt : Number of bytes of the data that are actually to be written into
4980 * the Eeprom. (max of 3)
4982 * Actually writes the relevant part of the data value into the Eeprom
4983 * through the I2C bus.
4985 * 0 on success, -1 on failure.
4988 static int write_eeprom(nic_t
* sp
, int off
, u64 data
, int cnt
)
4990 int exit_cnt
= 0, ret
= -1;
4992 XENA_dev_config_t __iomem
*bar0
= sp
->bar0
;
4994 if (sp
->device_type
== XFRAME_I_DEVICE
) {
4995 val64
= I2C_CONTROL_DEV_ID(S2IO_DEV_ID
) | I2C_CONTROL_ADDR(off
) |
4996 I2C_CONTROL_BYTE_CNT(cnt
) | I2C_CONTROL_SET_DATA((u32
)data
) |
4997 I2C_CONTROL_CNTL_START
;
4998 SPECIAL_REG_WRITE(val64
, &bar0
->i2c_control
, LF
);
5000 while (exit_cnt
< 5) {
5001 val64
= readq(&bar0
->i2c_control
);
5002 if (I2C_CONTROL_CNTL_END(val64
)) {
5003 if (!(val64
& I2C_CONTROL_NACK
))
5012 if (sp
->device_type
== XFRAME_II_DEVICE
) {
5013 int write_cnt
= (cnt
== 8) ? 0 : cnt
;
5014 writeq(SPI_DATA_WRITE(data
,(cnt
<<3)), &bar0
->spi_data
);
5016 val64
= SPI_CONTROL_KEY(0x9) | SPI_CONTROL_SEL1
|
5017 SPI_CONTROL_BYTECNT(write_cnt
) |
5018 SPI_CONTROL_CMD(0x2) | SPI_CONTROL_ADDR(off
);
5019 SPECIAL_REG_WRITE(val64
, &bar0
->spi_control
, LF
);
5020 val64
|= SPI_CONTROL_REQ
;
5021 SPECIAL_REG_WRITE(val64
, &bar0
->spi_control
, LF
);
5022 while (exit_cnt
< 5) {
5023 val64
= readq(&bar0
->spi_control
);
5024 if (val64
& SPI_CONTROL_NACK
) {
5027 } else if (val64
& SPI_CONTROL_DONE
) {
5037 static void s2io_vpd_read(nic_t
*nic
)
5039 u8 vpd_data
[256],data
;
5040 int i
=0, cnt
, fail
= 0;
5041 int vpd_addr
= 0x80;
5043 if (nic
->device_type
== XFRAME_II_DEVICE
) {
5044 strcpy(nic
->product_name
, "Xframe II 10GbE network adapter");
5048 strcpy(nic
->product_name
, "Xframe I 10GbE network adapter");
5052 for (i
= 0; i
< 256; i
+=4 ) {
5053 pci_write_config_byte(nic
->pdev
, (vpd_addr
+ 2), i
);
5054 pci_read_config_byte(nic
->pdev
, (vpd_addr
+ 2), &data
);
5055 pci_write_config_byte(nic
->pdev
, (vpd_addr
+ 3), 0);
5056 for (cnt
= 0; cnt
<5; cnt
++) {
5058 pci_read_config_byte(nic
->pdev
, (vpd_addr
+ 3), &data
);
5063 DBG_PRINT(ERR_DBG
, "Read of VPD data failed\n");
5067 pci_read_config_dword(nic
->pdev
, (vpd_addr
+ 4),
5068 (u32
*)&vpd_data
[i
]);
5070 if ((!fail
) && (vpd_data
[1] < VPD_PRODUCT_NAME_LEN
)) {
5071 memset(nic
->product_name
, 0, vpd_data
[1]);
5072 memcpy(nic
->product_name
, &vpd_data
[3], vpd_data
[1]);
5077 * s2io_ethtool_geeprom - reads the value stored in the Eeprom.
5078 * @sp : private member of the device structure, which is a pointer to the * s2io_nic structure.
5079 * @eeprom : pointer to the user level structure provided by ethtool,
5080 * containing all relevant information.
5081 * @data_buf : user defined value to be written into Eeprom.
5082 * Description: Reads the values stored in the Eeprom at given offset
5083 * for a given length. Stores these values int the input argument data
5084 * buffer 'data_buf' and returns these to the caller (ethtool.)
5089 static int s2io_ethtool_geeprom(struct net_device
*dev
,
5090 struct ethtool_eeprom
*eeprom
, u8
* data_buf
)
5094 nic_t
*sp
= dev
->priv
;
5096 eeprom
->magic
= sp
->pdev
->vendor
| (sp
->pdev
->device
<< 16);
5098 if ((eeprom
->offset
+ eeprom
->len
) > (XENA_EEPROM_SPACE
))
5099 eeprom
->len
= XENA_EEPROM_SPACE
- eeprom
->offset
;
5101 for (i
= 0; i
< eeprom
->len
; i
+= 4) {
5102 if (read_eeprom(sp
, (eeprom
->offset
+ i
), &data
)) {
5103 DBG_PRINT(ERR_DBG
, "Read of EEPROM failed\n");
5107 memcpy((data_buf
+ i
), &valid
, 4);
5113 * s2io_ethtool_seeprom - tries to write the user provided value in Eeprom
5114 * @sp : private member of the device structure, which is a pointer to the
5115 * s2io_nic structure.
5116 * @eeprom : pointer to the user level structure provided by ethtool,
5117 * containing all relevant information.
5118 * @data_buf ; user defined value to be written into Eeprom.
5120 * Tries to write the user provided value in the Eeprom, at the offset
5121 * given by the user.
5123 * 0 on success, -EFAULT on failure.
5126 static int s2io_ethtool_seeprom(struct net_device
*dev
,
5127 struct ethtool_eeprom
*eeprom
,
5130 int len
= eeprom
->len
, cnt
= 0;
5131 u64 valid
= 0, data
;
5132 nic_t
*sp
= dev
->priv
;
5134 if (eeprom
->magic
!= (sp
->pdev
->vendor
| (sp
->pdev
->device
<< 16))) {
5136 "ETHTOOL_WRITE_EEPROM Err: Magic value ");
5137 DBG_PRINT(ERR_DBG
, "is wrong, Its not 0x%x\n",
5143 data
= (u32
) data_buf
[cnt
] & 0x000000FF;
5145 valid
= (u32
) (data
<< 24);
5149 if (write_eeprom(sp
, (eeprom
->offset
+ cnt
), valid
, 0)) {
5151 "ETHTOOL_WRITE_EEPROM Err: Cannot ");
5153 "write into the specified offset\n");
5164 * s2io_register_test - reads and writes into all clock domains.
5165 * @sp : private member of the device structure, which is a pointer to the
5166 * s2io_nic structure.
5167 * @data : variable that returns the result of each of the test conducted b
5170 * Read and write into all clock domains. The NIC has 3 clock domains,
5171 * see that registers in all the three regions are accessible.
5176 static int s2io_register_test(nic_t
* sp
, uint64_t * data
)
5178 XENA_dev_config_t __iomem
*bar0
= sp
->bar0
;
5179 u64 val64
= 0, exp_val
;
5182 val64
= readq(&bar0
->pif_rd_swapper_fb
);
5183 if (val64
!= 0x123456789abcdefULL
) {
5185 DBG_PRINT(INFO_DBG
, "Read Test level 1 fails\n");
5188 val64
= readq(&bar0
->rmac_pause_cfg
);
5189 if (val64
!= 0xc000ffff00000000ULL
) {
5191 DBG_PRINT(INFO_DBG
, "Read Test level 2 fails\n");
5194 val64
= readq(&bar0
->rx_queue_cfg
);
5195 if (sp
->device_type
== XFRAME_II_DEVICE
)
5196 exp_val
= 0x0404040404040404ULL
;
5198 exp_val
= 0x0808080808080808ULL
;
5199 if (val64
!= exp_val
) {
5201 DBG_PRINT(INFO_DBG
, "Read Test level 3 fails\n");
5204 val64
= readq(&bar0
->xgxs_efifo_cfg
);
5205 if (val64
!= 0x000000001923141EULL
) {
5207 DBG_PRINT(INFO_DBG
, "Read Test level 4 fails\n");
5210 val64
= 0x5A5A5A5A5A5A5A5AULL
;
5211 writeq(val64
, &bar0
->xmsi_data
);
5212 val64
= readq(&bar0
->xmsi_data
);
5213 if (val64
!= 0x5A5A5A5A5A5A5A5AULL
) {
5215 DBG_PRINT(ERR_DBG
, "Write Test level 1 fails\n");
5218 val64
= 0xA5A5A5A5A5A5A5A5ULL
;
5219 writeq(val64
, &bar0
->xmsi_data
);
5220 val64
= readq(&bar0
->xmsi_data
);
5221 if (val64
!= 0xA5A5A5A5A5A5A5A5ULL
) {
5223 DBG_PRINT(ERR_DBG
, "Write Test level 2 fails\n");
5231 * s2io_eeprom_test - to verify that EEprom in the xena can be programmed.
5232 * @sp : private member of the device structure, which is a pointer to the
5233 * s2io_nic structure.
5234 * @data:variable that returns the result of each of the test conducted by
5237 * Verify that EEPROM in the xena can be programmed using I2C_CONTROL
5243 static int s2io_eeprom_test(nic_t
* sp
, uint64_t * data
)
5246 u64 ret_data
, org_4F0
, org_7F0
;
5247 u8 saved_4F0
= 0, saved_7F0
= 0;
5248 struct net_device
*dev
= sp
->dev
;
5250 /* Test Write Error at offset 0 */
5251 /* Note that SPI interface allows write access to all areas
5252 * of EEPROM. Hence doing all negative testing only for Xframe I.
5254 if (sp
->device_type
== XFRAME_I_DEVICE
)
5255 if (!write_eeprom(sp
, 0, 0, 3))
5258 /* Save current values at offsets 0x4F0 and 0x7F0 */
5259 if (!read_eeprom(sp
, 0x4F0, &org_4F0
))
5261 if (!read_eeprom(sp
, 0x7F0, &org_7F0
))
5264 /* Test Write at offset 4f0 */
5265 if (write_eeprom(sp
, 0x4F0, 0x012345, 3))
5267 if (read_eeprom(sp
, 0x4F0, &ret_data
))
5270 if (ret_data
!= 0x012345) {
5271 DBG_PRINT(ERR_DBG
, "%s: eeprom test error at offset 0x4F0. "
5272 "Data written %llx Data read %llx\n",
5273 dev
->name
, (unsigned long long)0x12345,
5274 (unsigned long long)ret_data
);
5278 /* Reset the EEPROM data go FFFF */
5279 write_eeprom(sp
, 0x4F0, 0xFFFFFF, 3);
5281 /* Test Write Request Error at offset 0x7c */
5282 if (sp
->device_type
== XFRAME_I_DEVICE
)
5283 if (!write_eeprom(sp
, 0x07C, 0, 3))
5286 /* Test Write Request at offset 0x7f0 */
5287 if (write_eeprom(sp
, 0x7F0, 0x012345, 3))
5289 if (read_eeprom(sp
, 0x7F0, &ret_data
))
5292 if (ret_data
!= 0x012345) {
5293 DBG_PRINT(ERR_DBG
, "%s: eeprom test error at offset 0x7F0. "
5294 "Data written %llx Data read %llx\n",
5295 dev
->name
, (unsigned long long)0x12345,
5296 (unsigned long long)ret_data
);
5300 /* Reset the EEPROM data go FFFF */
5301 write_eeprom(sp
, 0x7F0, 0xFFFFFF, 3);
5303 if (sp
->device_type
== XFRAME_I_DEVICE
) {
5304 /* Test Write Error at offset 0x80 */
5305 if (!write_eeprom(sp
, 0x080, 0, 3))
5308 /* Test Write Error at offset 0xfc */
5309 if (!write_eeprom(sp
, 0x0FC, 0, 3))
5312 /* Test Write Error at offset 0x100 */
5313 if (!write_eeprom(sp
, 0x100, 0, 3))
5316 /* Test Write Error at offset 4ec */
5317 if (!write_eeprom(sp
, 0x4EC, 0, 3))
5321 /* Restore values at offsets 0x4F0 and 0x7F0 */
5323 write_eeprom(sp
, 0x4F0, org_4F0
, 3);
5325 write_eeprom(sp
, 0x7F0, org_7F0
, 3);
5332 * s2io_bist_test - invokes the MemBist test of the card .
5333 * @sp : private member of the device structure, which is a pointer to the
5334 * s2io_nic structure.
5335 * @data:variable that returns the result of each of the test conducted by
5338 * This invokes the MemBist test of the card. We give around
5339 * 2 secs time for the Test to complete. If it's still not complete
5340 * within this peiod, we consider that the test failed.
5342 * 0 on success and -1 on failure.
5345 static int s2io_bist_test(nic_t
* sp
, uint64_t * data
)
5348 int cnt
= 0, ret
= -1;
5350 pci_read_config_byte(sp
->pdev
, PCI_BIST
, &bist
);
5351 bist
|= PCI_BIST_START
;
5352 pci_write_config_word(sp
->pdev
, PCI_BIST
, bist
);
5355 pci_read_config_byte(sp
->pdev
, PCI_BIST
, &bist
);
5356 if (!(bist
& PCI_BIST_START
)) {
5357 *data
= (bist
& PCI_BIST_CODE_MASK
);
5369 * s2io-link_test - verifies the link state of the nic
5370 * @sp ; private member of the device structure, which is a pointer to the
5371 * s2io_nic structure.
5372 * @data: variable that returns the result of each of the test conducted by
5375 * The function verifies the link state of the NIC and updates the input
5376 * argument 'data' appropriately.
5381 static int s2io_link_test(nic_t
* sp
, uint64_t * data
)
5383 XENA_dev_config_t __iomem
*bar0
= sp
->bar0
;
5386 val64
= readq(&bar0
->adapter_status
);
5387 if(!(LINK_IS_UP(val64
)))
5396 * s2io_rldram_test - offline test for access to the RldRam chip on the NIC
5397 * @sp - private member of the device structure, which is a pointer to the
5398 * s2io_nic structure.
5399 * @data - variable that returns the result of each of the test
5400 * conducted by the driver.
5402 * This is one of the offline test that tests the read and write
5403 * access to the RldRam chip on the NIC.
5408 static int s2io_rldram_test(nic_t
* sp
, uint64_t * data
)
5410 XENA_dev_config_t __iomem
*bar0
= sp
->bar0
;
5412 int cnt
, iteration
= 0, test_fail
= 0;
5414 val64
= readq(&bar0
->adapter_control
);
5415 val64
&= ~ADAPTER_ECC_EN
;
5416 writeq(val64
, &bar0
->adapter_control
);
5418 val64
= readq(&bar0
->mc_rldram_test_ctrl
);
5419 val64
|= MC_RLDRAM_TEST_MODE
;
5420 SPECIAL_REG_WRITE(val64
, &bar0
->mc_rldram_test_ctrl
, LF
);
5422 val64
= readq(&bar0
->mc_rldram_mrs
);
5423 val64
|= MC_RLDRAM_QUEUE_SIZE_ENABLE
;
5424 SPECIAL_REG_WRITE(val64
, &bar0
->mc_rldram_mrs
, UF
);
5426 val64
|= MC_RLDRAM_MRS_ENABLE
;
5427 SPECIAL_REG_WRITE(val64
, &bar0
->mc_rldram_mrs
, UF
);
5429 while (iteration
< 2) {
5430 val64
= 0x55555555aaaa0000ULL
;
5431 if (iteration
== 1) {
5432 val64
^= 0xFFFFFFFFFFFF0000ULL
;
5434 writeq(val64
, &bar0
->mc_rldram_test_d0
);
5436 val64
= 0xaaaa5a5555550000ULL
;
5437 if (iteration
== 1) {
5438 val64
^= 0xFFFFFFFFFFFF0000ULL
;
5440 writeq(val64
, &bar0
->mc_rldram_test_d1
);
5442 val64
= 0x55aaaaaaaa5a0000ULL
;
5443 if (iteration
== 1) {
5444 val64
^= 0xFFFFFFFFFFFF0000ULL
;
5446 writeq(val64
, &bar0
->mc_rldram_test_d2
);
5448 val64
= (u64
) (0x0000003ffffe0100ULL
);
5449 writeq(val64
, &bar0
->mc_rldram_test_add
);
5451 val64
= MC_RLDRAM_TEST_MODE
| MC_RLDRAM_TEST_WRITE
|
5453 SPECIAL_REG_WRITE(val64
, &bar0
->mc_rldram_test_ctrl
, LF
);
5455 for (cnt
= 0; cnt
< 5; cnt
++) {
5456 val64
= readq(&bar0
->mc_rldram_test_ctrl
);
5457 if (val64
& MC_RLDRAM_TEST_DONE
)
5465 val64
= MC_RLDRAM_TEST_MODE
| MC_RLDRAM_TEST_GO
;
5466 SPECIAL_REG_WRITE(val64
, &bar0
->mc_rldram_test_ctrl
, LF
);
5468 for (cnt
= 0; cnt
< 5; cnt
++) {
5469 val64
= readq(&bar0
->mc_rldram_test_ctrl
);
5470 if (val64
& MC_RLDRAM_TEST_DONE
)
5478 val64
= readq(&bar0
->mc_rldram_test_ctrl
);
5479 if (!(val64
& MC_RLDRAM_TEST_PASS
))
5487 /* Bring the adapter out of test mode */
5488 SPECIAL_REG_WRITE(0, &bar0
->mc_rldram_test_ctrl
, LF
);
5494 * s2io_ethtool_test - conducts 6 tsets to determine the health of card.
5495 * @sp : private member of the device structure, which is a pointer to the
5496 * s2io_nic structure.
5497 * @ethtest : pointer to a ethtool command specific structure that will be
5498 * returned to the user.
5499 * @data : variable that returns the result of each of the test
5500 * conducted by the driver.
5502 * This function conducts 6 tests ( 4 offline and 2 online) to determine
5503 * the health of the card.
5508 static void s2io_ethtool_test(struct net_device
*dev
,
5509 struct ethtool_test
*ethtest
,
5512 nic_t
*sp
= dev
->priv
;
5513 int orig_state
= netif_running(sp
->dev
);
5515 if (ethtest
->flags
== ETH_TEST_FL_OFFLINE
) {
5516 /* Offline Tests. */
5518 s2io_close(sp
->dev
);
5520 if (s2io_register_test(sp
, &data
[0]))
5521 ethtest
->flags
|= ETH_TEST_FL_FAILED
;
5525 if (s2io_rldram_test(sp
, &data
[3]))
5526 ethtest
->flags
|= ETH_TEST_FL_FAILED
;
5530 if (s2io_eeprom_test(sp
, &data
[1]))
5531 ethtest
->flags
|= ETH_TEST_FL_FAILED
;
5533 if (s2io_bist_test(sp
, &data
[4]))
5534 ethtest
->flags
|= ETH_TEST_FL_FAILED
;
5544 "%s: is not up, cannot run test\n",
5553 if (s2io_link_test(sp
, &data
[2]))
5554 ethtest
->flags
|= ETH_TEST_FL_FAILED
;
5563 static void s2io_get_ethtool_stats(struct net_device
*dev
,
5564 struct ethtool_stats
*estats
,
5568 nic_t
*sp
= dev
->priv
;
5569 StatInfo_t
*stat_info
= sp
->mac_control
.stats_info
;
5571 s2io_updt_stats(sp
);
5573 (u64
)le32_to_cpu(stat_info
->tmac_frms_oflow
) << 32 |
5574 le32_to_cpu(stat_info
->tmac_frms
);
5576 (u64
)le32_to_cpu(stat_info
->tmac_data_octets_oflow
) << 32 |
5577 le32_to_cpu(stat_info
->tmac_data_octets
);
5578 tmp_stats
[i
++] = le64_to_cpu(stat_info
->tmac_drop_frms
);
5580 (u64
)le32_to_cpu(stat_info
->tmac_mcst_frms_oflow
) << 32 |
5581 le32_to_cpu(stat_info
->tmac_mcst_frms
);
5583 (u64
)le32_to_cpu(stat_info
->tmac_bcst_frms_oflow
) << 32 |
5584 le32_to_cpu(stat_info
->tmac_bcst_frms
);
5585 tmp_stats
[i
++] = le64_to_cpu(stat_info
->tmac_pause_ctrl_frms
);
5587 (u64
)le32_to_cpu(stat_info
->tmac_ttl_octets_oflow
) << 32 |
5588 le32_to_cpu(stat_info
->tmac_ttl_octets
);
5590 (u64
)le32_to_cpu(stat_info
->tmac_ucst_frms_oflow
) << 32 |
5591 le32_to_cpu(stat_info
->tmac_ucst_frms
);
5593 (u64
)le32_to_cpu(stat_info
->tmac_nucst_frms_oflow
) << 32 |
5594 le32_to_cpu(stat_info
->tmac_nucst_frms
);
5596 (u64
)le32_to_cpu(stat_info
->tmac_any_err_frms_oflow
) << 32 |
5597 le32_to_cpu(stat_info
->tmac_any_err_frms
);
5598 tmp_stats
[i
++] = le64_to_cpu(stat_info
->tmac_ttl_less_fb_octets
);
5599 tmp_stats
[i
++] = le64_to_cpu(stat_info
->tmac_vld_ip_octets
);
5601 (u64
)le32_to_cpu(stat_info
->tmac_vld_ip_oflow
) << 32 |
5602 le32_to_cpu(stat_info
->tmac_vld_ip
);
5604 (u64
)le32_to_cpu(stat_info
->tmac_drop_ip_oflow
) << 32 |
5605 le32_to_cpu(stat_info
->tmac_drop_ip
);
5607 (u64
)le32_to_cpu(stat_info
->tmac_icmp_oflow
) << 32 |
5608 le32_to_cpu(stat_info
->tmac_icmp
);
5610 (u64
)le32_to_cpu(stat_info
->tmac_rst_tcp_oflow
) << 32 |
5611 le32_to_cpu(stat_info
->tmac_rst_tcp
);
5612 tmp_stats
[i
++] = le64_to_cpu(stat_info
->tmac_tcp
);
5613 tmp_stats
[i
++] = (u64
)le32_to_cpu(stat_info
->tmac_udp_oflow
) << 32 |
5614 le32_to_cpu(stat_info
->tmac_udp
);
5616 (u64
)le32_to_cpu(stat_info
->rmac_vld_frms_oflow
) << 32 |
5617 le32_to_cpu(stat_info
->rmac_vld_frms
);
5619 (u64
)le32_to_cpu(stat_info
->rmac_data_octets_oflow
) << 32 |
5620 le32_to_cpu(stat_info
->rmac_data_octets
);
5621 tmp_stats
[i
++] = le64_to_cpu(stat_info
->rmac_fcs_err_frms
);
5622 tmp_stats
[i
++] = le64_to_cpu(stat_info
->rmac_drop_frms
);
5624 (u64
)le32_to_cpu(stat_info
->rmac_vld_mcst_frms_oflow
) << 32 |
5625 le32_to_cpu(stat_info
->rmac_vld_mcst_frms
);
5627 (u64
)le32_to_cpu(stat_info
->rmac_vld_bcst_frms_oflow
) << 32 |
5628 le32_to_cpu(stat_info
->rmac_vld_bcst_frms
);
5629 tmp_stats
[i
++] = le32_to_cpu(stat_info
->rmac_in_rng_len_err_frms
);
5630 tmp_stats
[i
++] = le32_to_cpu(stat_info
->rmac_out_rng_len_err_frms
);
5631 tmp_stats
[i
++] = le64_to_cpu(stat_info
->rmac_long_frms
);
5632 tmp_stats
[i
++] = le64_to_cpu(stat_info
->rmac_pause_ctrl_frms
);
5633 tmp_stats
[i
++] = le64_to_cpu(stat_info
->rmac_unsup_ctrl_frms
);
5635 (u64
)le32_to_cpu(stat_info
->rmac_ttl_octets_oflow
) << 32 |
5636 le32_to_cpu(stat_info
->rmac_ttl_octets
);
5638 (u64
)le32_to_cpu(stat_info
->rmac_accepted_ucst_frms_oflow
)
5639 << 32 | le32_to_cpu(stat_info
->rmac_accepted_ucst_frms
);
5641 (u64
)le32_to_cpu(stat_info
->rmac_accepted_nucst_frms_oflow
)
5642 << 32 | le32_to_cpu(stat_info
->rmac_accepted_nucst_frms
);
5644 (u64
)le32_to_cpu(stat_info
->rmac_discarded_frms_oflow
) << 32 |
5645 le32_to_cpu(stat_info
->rmac_discarded_frms
);
5647 (u64
)le32_to_cpu(stat_info
->rmac_drop_events_oflow
)
5648 << 32 | le32_to_cpu(stat_info
->rmac_drop_events
);
5649 tmp_stats
[i
++] = le64_to_cpu(stat_info
->rmac_ttl_less_fb_octets
);
5650 tmp_stats
[i
++] = le64_to_cpu(stat_info
->rmac_ttl_frms
);
5652 (u64
)le32_to_cpu(stat_info
->rmac_usized_frms_oflow
) << 32 |
5653 le32_to_cpu(stat_info
->rmac_usized_frms
);
5655 (u64
)le32_to_cpu(stat_info
->rmac_osized_frms_oflow
) << 32 |
5656 le32_to_cpu(stat_info
->rmac_osized_frms
);
5658 (u64
)le32_to_cpu(stat_info
->rmac_frag_frms_oflow
) << 32 |
5659 le32_to_cpu(stat_info
->rmac_frag_frms
);
5661 (u64
)le32_to_cpu(stat_info
->rmac_jabber_frms_oflow
) << 32 |
5662 le32_to_cpu(stat_info
->rmac_jabber_frms
);
5663 tmp_stats
[i
++] = le64_to_cpu(stat_info
->rmac_ttl_64_frms
);
5664 tmp_stats
[i
++] = le64_to_cpu(stat_info
->rmac_ttl_65_127_frms
);
5665 tmp_stats
[i
++] = le64_to_cpu(stat_info
->rmac_ttl_128_255_frms
);
5666 tmp_stats
[i
++] = le64_to_cpu(stat_info
->rmac_ttl_256_511_frms
);
5667 tmp_stats
[i
++] = le64_to_cpu(stat_info
->rmac_ttl_512_1023_frms
);
5668 tmp_stats
[i
++] = le64_to_cpu(stat_info
->rmac_ttl_1024_1518_frms
);
5670 (u64
)le32_to_cpu(stat_info
->rmac_ip_oflow
) << 32 |
5671 le32_to_cpu(stat_info
->rmac_ip
);
5672 tmp_stats
[i
++] = le64_to_cpu(stat_info
->rmac_ip_octets
);
5673 tmp_stats
[i
++] = le32_to_cpu(stat_info
->rmac_hdr_err_ip
);
5675 (u64
)le32_to_cpu(stat_info
->rmac_drop_ip_oflow
) << 32 |
5676 le32_to_cpu(stat_info
->rmac_drop_ip
);
5678 (u64
)le32_to_cpu(stat_info
->rmac_icmp_oflow
) << 32 |
5679 le32_to_cpu(stat_info
->rmac_icmp
);
5680 tmp_stats
[i
++] = le64_to_cpu(stat_info
->rmac_tcp
);
5682 (u64
)le32_to_cpu(stat_info
->rmac_udp_oflow
) << 32 |
5683 le32_to_cpu(stat_info
->rmac_udp
);
5685 (u64
)le32_to_cpu(stat_info
->rmac_err_drp_udp_oflow
) << 32 |
5686 le32_to_cpu(stat_info
->rmac_err_drp_udp
);
5687 tmp_stats
[i
++] = le64_to_cpu(stat_info
->rmac_xgmii_err_sym
);
5688 tmp_stats
[i
++] = le64_to_cpu(stat_info
->rmac_frms_q0
);
5689 tmp_stats
[i
++] = le64_to_cpu(stat_info
->rmac_frms_q1
);
5690 tmp_stats
[i
++] = le64_to_cpu(stat_info
->rmac_frms_q2
);
5691 tmp_stats
[i
++] = le64_to_cpu(stat_info
->rmac_frms_q3
);
5692 tmp_stats
[i
++] = le64_to_cpu(stat_info
->rmac_frms_q4
);
5693 tmp_stats
[i
++] = le64_to_cpu(stat_info
->rmac_frms_q5
);
5694 tmp_stats
[i
++] = le64_to_cpu(stat_info
->rmac_frms_q6
);
5695 tmp_stats
[i
++] = le64_to_cpu(stat_info
->rmac_frms_q7
);
5696 tmp_stats
[i
++] = le16_to_cpu(stat_info
->rmac_full_q0
);
5697 tmp_stats
[i
++] = le16_to_cpu(stat_info
->rmac_full_q1
);
5698 tmp_stats
[i
++] = le16_to_cpu(stat_info
->rmac_full_q2
);
5699 tmp_stats
[i
++] = le16_to_cpu(stat_info
->rmac_full_q3
);
5700 tmp_stats
[i
++] = le16_to_cpu(stat_info
->rmac_full_q4
);
5701 tmp_stats
[i
++] = le16_to_cpu(stat_info
->rmac_full_q5
);
5702 tmp_stats
[i
++] = le16_to_cpu(stat_info
->rmac_full_q6
);
5703 tmp_stats
[i
++] = le16_to_cpu(stat_info
->rmac_full_q7
);
5705 (u64
)le32_to_cpu(stat_info
->rmac_pause_cnt_oflow
) << 32 |
5706 le32_to_cpu(stat_info
->rmac_pause_cnt
);
5707 tmp_stats
[i
++] = le64_to_cpu(stat_info
->rmac_xgmii_data_err_cnt
);
5708 tmp_stats
[i
++] = le64_to_cpu(stat_info
->rmac_xgmii_ctrl_err_cnt
);
5710 (u64
)le32_to_cpu(stat_info
->rmac_accepted_ip_oflow
) << 32 |
5711 le32_to_cpu(stat_info
->rmac_accepted_ip
);
5712 tmp_stats
[i
++] = le32_to_cpu(stat_info
->rmac_err_tcp
);
5713 tmp_stats
[i
++] = le32_to_cpu(stat_info
->rd_req_cnt
);
5714 tmp_stats
[i
++] = le32_to_cpu(stat_info
->new_rd_req_cnt
);
5715 tmp_stats
[i
++] = le32_to_cpu(stat_info
->new_rd_req_rtry_cnt
);
5716 tmp_stats
[i
++] = le32_to_cpu(stat_info
->rd_rtry_cnt
);
5717 tmp_stats
[i
++] = le32_to_cpu(stat_info
->wr_rtry_rd_ack_cnt
);
5718 tmp_stats
[i
++] = le32_to_cpu(stat_info
->wr_req_cnt
);
5719 tmp_stats
[i
++] = le32_to_cpu(stat_info
->new_wr_req_cnt
);
5720 tmp_stats
[i
++] = le32_to_cpu(stat_info
->new_wr_req_rtry_cnt
);
5721 tmp_stats
[i
++] = le32_to_cpu(stat_info
->wr_rtry_cnt
);
5722 tmp_stats
[i
++] = le32_to_cpu(stat_info
->wr_disc_cnt
);
5723 tmp_stats
[i
++] = le32_to_cpu(stat_info
->rd_rtry_wr_ack_cnt
);
5724 tmp_stats
[i
++] = le32_to_cpu(stat_info
->txp_wr_cnt
);
5725 tmp_stats
[i
++] = le32_to_cpu(stat_info
->txd_rd_cnt
);
5726 tmp_stats
[i
++] = le32_to_cpu(stat_info
->txd_wr_cnt
);
5727 tmp_stats
[i
++] = le32_to_cpu(stat_info
->rxd_rd_cnt
);
5728 tmp_stats
[i
++] = le32_to_cpu(stat_info
->rxd_wr_cnt
);
5729 tmp_stats
[i
++] = le32_to_cpu(stat_info
->txf_rd_cnt
);
5730 tmp_stats
[i
++] = le32_to_cpu(stat_info
->rxf_wr_cnt
);
5731 tmp_stats
[i
++] = le64_to_cpu(stat_info
->rmac_ttl_1519_4095_frms
);
5732 tmp_stats
[i
++] = le64_to_cpu(stat_info
->rmac_ttl_4096_8191_frms
);
5733 tmp_stats
[i
++] = le64_to_cpu(stat_info
->rmac_ttl_8192_max_frms
);
5734 tmp_stats
[i
++] = le64_to_cpu(stat_info
->rmac_ttl_gt_max_frms
);
5735 tmp_stats
[i
++] = le64_to_cpu(stat_info
->rmac_osized_alt_frms
);
5736 tmp_stats
[i
++] = le64_to_cpu(stat_info
->rmac_jabber_alt_frms
);
5737 tmp_stats
[i
++] = le64_to_cpu(stat_info
->rmac_gt_max_alt_frms
);
5738 tmp_stats
[i
++] = le64_to_cpu(stat_info
->rmac_vlan_frms
);
5739 tmp_stats
[i
++] = le32_to_cpu(stat_info
->rmac_len_discard
);
5740 tmp_stats
[i
++] = le32_to_cpu(stat_info
->rmac_fcs_discard
);
5741 tmp_stats
[i
++] = le32_to_cpu(stat_info
->rmac_pf_discard
);
5742 tmp_stats
[i
++] = le32_to_cpu(stat_info
->rmac_da_discard
);
5743 tmp_stats
[i
++] = le32_to_cpu(stat_info
->rmac_red_discard
);
5744 tmp_stats
[i
++] = le32_to_cpu(stat_info
->rmac_rts_discard
);
5745 tmp_stats
[i
++] = le32_to_cpu(stat_info
->rmac_ingm_full_discard
);
5746 tmp_stats
[i
++] = le32_to_cpu(stat_info
->link_fault_cnt
);
5748 tmp_stats
[i
++] = stat_info
->sw_stat
.single_ecc_errs
;
5749 tmp_stats
[i
++] = stat_info
->sw_stat
.double_ecc_errs
;
5750 tmp_stats
[i
++] = stat_info
->sw_stat
.parity_err_cnt
;
5751 tmp_stats
[i
++] = stat_info
->sw_stat
.serious_err_cnt
;
5752 tmp_stats
[i
++] = stat_info
->sw_stat
.soft_reset_cnt
;
5753 tmp_stats
[i
++] = stat_info
->sw_stat
.fifo_full_cnt
;
5754 tmp_stats
[i
++] = stat_info
->sw_stat
.ring_full_cnt
;
5755 tmp_stats
[i
++] = stat_info
->xpak_stat
.alarm_transceiver_temp_high
;
5756 tmp_stats
[i
++] = stat_info
->xpak_stat
.alarm_transceiver_temp_low
;
5757 tmp_stats
[i
++] = stat_info
->xpak_stat
.alarm_laser_bias_current_high
;
5758 tmp_stats
[i
++] = stat_info
->xpak_stat
.alarm_laser_bias_current_low
;
5759 tmp_stats
[i
++] = stat_info
->xpak_stat
.alarm_laser_output_power_high
;
5760 tmp_stats
[i
++] = stat_info
->xpak_stat
.alarm_laser_output_power_low
;
5761 tmp_stats
[i
++] = stat_info
->xpak_stat
.warn_transceiver_temp_high
;
5762 tmp_stats
[i
++] = stat_info
->xpak_stat
.warn_transceiver_temp_low
;
5763 tmp_stats
[i
++] = stat_info
->xpak_stat
.warn_laser_bias_current_high
;
5764 tmp_stats
[i
++] = stat_info
->xpak_stat
.warn_laser_bias_current_low
;
5765 tmp_stats
[i
++] = stat_info
->xpak_stat
.warn_laser_output_power_high
;
5766 tmp_stats
[i
++] = stat_info
->xpak_stat
.warn_laser_output_power_low
;
5767 tmp_stats
[i
++] = stat_info
->sw_stat
.clubbed_frms_cnt
;
5768 tmp_stats
[i
++] = stat_info
->sw_stat
.sending_both
;
5769 tmp_stats
[i
++] = stat_info
->sw_stat
.outof_sequence_pkts
;
5770 tmp_stats
[i
++] = stat_info
->sw_stat
.flush_max_pkts
;
5771 if (stat_info
->sw_stat
.num_aggregations
) {
5772 u64 tmp
= stat_info
->sw_stat
.sum_avg_pkts_aggregated
;
5775 * Since 64-bit divide does not work on all platforms,
5776 * do repeated subtraction.
5778 while (tmp
>= stat_info
->sw_stat
.num_aggregations
) {
5779 tmp
-= stat_info
->sw_stat
.num_aggregations
;
5782 tmp_stats
[i
++] = count
;
5788 static int s2io_ethtool_get_regs_len(struct net_device
*dev
)
5790 return (XENA_REG_SPACE
);
5794 static u32
s2io_ethtool_get_rx_csum(struct net_device
* dev
)
5796 nic_t
*sp
= dev
->priv
;
5798 return (sp
->rx_csum
);
5801 static int s2io_ethtool_set_rx_csum(struct net_device
*dev
, u32 data
)
5803 nic_t
*sp
= dev
->priv
;
5813 static int s2io_get_eeprom_len(struct net_device
*dev
)
5815 return (XENA_EEPROM_SPACE
);
5818 static int s2io_ethtool_self_test_count(struct net_device
*dev
)
5820 return (S2IO_TEST_LEN
);
5823 static void s2io_ethtool_get_strings(struct net_device
*dev
,
5824 u32 stringset
, u8
* data
)
5826 switch (stringset
) {
5828 memcpy(data
, s2io_gstrings
, S2IO_STRINGS_LEN
);
5831 memcpy(data
, ðtool_stats_keys
,
5832 sizeof(ethtool_stats_keys
));
5835 static int s2io_ethtool_get_stats_count(struct net_device
*dev
)
5837 return (S2IO_STAT_LEN
);
5840 static int s2io_ethtool_op_set_tx_csum(struct net_device
*dev
, u32 data
)
5843 dev
->features
|= NETIF_F_IP_CSUM
;
5845 dev
->features
&= ~NETIF_F_IP_CSUM
;
5851 static struct ethtool_ops netdev_ethtool_ops
= {
5852 .get_settings
= s2io_ethtool_gset
,
5853 .set_settings
= s2io_ethtool_sset
,
5854 .get_drvinfo
= s2io_ethtool_gdrvinfo
,
5855 .get_regs_len
= s2io_ethtool_get_regs_len
,
5856 .get_regs
= s2io_ethtool_gregs
,
5857 .get_link
= ethtool_op_get_link
,
5858 .get_eeprom_len
= s2io_get_eeprom_len
,
5859 .get_eeprom
= s2io_ethtool_geeprom
,
5860 .set_eeprom
= s2io_ethtool_seeprom
,
5861 .get_pauseparam
= s2io_ethtool_getpause_data
,
5862 .set_pauseparam
= s2io_ethtool_setpause_data
,
5863 .get_rx_csum
= s2io_ethtool_get_rx_csum
,
5864 .set_rx_csum
= s2io_ethtool_set_rx_csum
,
5865 .get_tx_csum
= ethtool_op_get_tx_csum
,
5866 .set_tx_csum
= s2io_ethtool_op_set_tx_csum
,
5867 .get_sg
= ethtool_op_get_sg
,
5868 .set_sg
= ethtool_op_set_sg
,
5870 .get_tso
= ethtool_op_get_tso
,
5871 .set_tso
= ethtool_op_set_tso
,
5873 .get_ufo
= ethtool_op_get_ufo
,
5874 .set_ufo
= ethtool_op_set_ufo
,
5875 .self_test_count
= s2io_ethtool_self_test_count
,
5876 .self_test
= s2io_ethtool_test
,
5877 .get_strings
= s2io_ethtool_get_strings
,
5878 .phys_id
= s2io_ethtool_idnic
,
5879 .get_stats_count
= s2io_ethtool_get_stats_count
,
5880 .get_ethtool_stats
= s2io_get_ethtool_stats
5884 * s2io_ioctl - Entry point for the Ioctl
5885 * @dev : Device pointer.
5886 * @ifr : An IOCTL specefic structure, that can contain a pointer to
5887 * a proprietary structure used to pass information to the driver.
5888 * @cmd : This is used to distinguish between the different commands that
5889 * can be passed to the IOCTL functions.
5891 * Currently there are no special functionality supported in IOCTL, hence
5892 * function always return EOPNOTSUPPORTED
5895 static int s2io_ioctl(struct net_device
*dev
, struct ifreq
*rq
, int cmd
)
5901 * s2io_change_mtu - entry point to change MTU size for the device.
5902 * @dev : device pointer.
5903 * @new_mtu : the new MTU size for the device.
5904 * Description: A driver entry point to change MTU size for the device.
5905 * Before changing the MTU the device must be stopped.
5907 * 0 on success and an appropriate (-)ve integer as defined in errno.h
5911 static int s2io_change_mtu(struct net_device
*dev
, int new_mtu
)
5913 nic_t
*sp
= dev
->priv
;
5915 if ((new_mtu
< MIN_MTU
) || (new_mtu
> S2IO_JUMBO_SIZE
)) {
5916 DBG_PRINT(ERR_DBG
, "%s: MTU size is invalid.\n",
5922 if (netif_running(dev
)) {
5923 s2io_card_down(sp
, 0);
5924 netif_stop_queue(dev
);
5925 if (s2io_card_up(sp
)) {
5926 DBG_PRINT(ERR_DBG
, "%s: Device bring up failed\n",
5929 if (netif_queue_stopped(dev
))
5930 netif_wake_queue(dev
);
5931 } else { /* Device is down */
5932 XENA_dev_config_t __iomem
*bar0
= sp
->bar0
;
5933 u64 val64
= new_mtu
;
5935 writeq(vBIT(val64
, 2, 14), &bar0
->rmac_max_pyld_len
);
5942 * s2io_tasklet - Bottom half of the ISR.
5943 * @dev_adr : address of the device structure in dma_addr_t format.
5945 * This is the tasklet or the bottom half of the ISR. This is
5946 * an extension of the ISR which is scheduled by the scheduler to be run
5947 * when the load on the CPU is low. All low priority tasks of the ISR can
5948 * be pushed into the tasklet. For now the tasklet is used only to
5949 * replenish the Rx buffers in the Rx buffer descriptors.
5954 static void s2io_tasklet(unsigned long dev_addr
)
5956 struct net_device
*dev
= (struct net_device
*) dev_addr
;
5957 nic_t
*sp
= dev
->priv
;
5959 mac_info_t
*mac_control
;
5960 struct config_param
*config
;
5962 mac_control
= &sp
->mac_control
;
5963 config
= &sp
->config
;
5965 if (!TASKLET_IN_USE
) {
5966 for (i
= 0; i
< config
->rx_ring_num
; i
++) {
5967 ret
= fill_rx_buffers(sp
, i
);
5968 if (ret
== -ENOMEM
) {
5969 DBG_PRINT(ERR_DBG
, "%s: Out of ",
5971 DBG_PRINT(ERR_DBG
, "memory in tasklet\n");
5973 } else if (ret
== -EFILL
) {
5975 "%s: Rx Ring %d is full\n",
5980 clear_bit(0, (&sp
->tasklet_status
));
5985 * s2io_set_link - Set the LInk status
5986 * @data: long pointer to device private structue
5987 * Description: Sets the link status for the adapter
5990 static void s2io_set_link(unsigned long data
)
5992 nic_t
*nic
= (nic_t
*) data
;
5993 struct net_device
*dev
= nic
->dev
;
5994 XENA_dev_config_t __iomem
*bar0
= nic
->bar0
;
5998 if (test_and_set_bit(0, &(nic
->link_state
))) {
5999 /* The card is being reset, no point doing anything */
6003 subid
= nic
->pdev
->subsystem_device
;
6004 if (s2io_link_fault_indication(nic
) == MAC_RMAC_ERR_TIMER
) {
6006 * Allow a small delay for the NICs self initiated
6007 * cleanup to complete.
6012 val64
= readq(&bar0
->adapter_status
);
6013 if (verify_xena_quiescence(nic
, val64
, nic
->device_enabled_once
)) {
6014 if (LINK_IS_UP(val64
)) {
6015 val64
= readq(&bar0
->adapter_control
);
6016 val64
|= ADAPTER_CNTL_EN
;
6017 writeq(val64
, &bar0
->adapter_control
);
6018 if (CARDS_WITH_FAULTY_LINK_INDICATORS(nic
->device_type
,
6020 val64
= readq(&bar0
->gpio_control
);
6021 val64
|= GPIO_CTRL_GPIO_0
;
6022 writeq(val64
, &bar0
->gpio_control
);
6023 val64
= readq(&bar0
->gpio_control
);
6025 val64
|= ADAPTER_LED_ON
;
6026 writeq(val64
, &bar0
->adapter_control
);
6028 if (s2io_link_fault_indication(nic
) ==
6029 MAC_RMAC_ERR_TIMER
) {
6030 val64
= readq(&bar0
->adapter_status
);
6031 if (!LINK_IS_UP(val64
)) {
6032 DBG_PRINT(ERR_DBG
, "%s:", dev
->name
);
6033 DBG_PRINT(ERR_DBG
, " Link down");
6034 DBG_PRINT(ERR_DBG
, "after ");
6035 DBG_PRINT(ERR_DBG
, "enabling ");
6036 DBG_PRINT(ERR_DBG
, "device \n");
6039 if (nic
->device_enabled_once
== FALSE
) {
6040 nic
->device_enabled_once
= TRUE
;
6042 s2io_link(nic
, LINK_UP
);
6044 if (CARDS_WITH_FAULTY_LINK_INDICATORS(nic
->device_type
,
6046 val64
= readq(&bar0
->gpio_control
);
6047 val64
&= ~GPIO_CTRL_GPIO_0
;
6048 writeq(val64
, &bar0
->gpio_control
);
6049 val64
= readq(&bar0
->gpio_control
);
6051 s2io_link(nic
, LINK_DOWN
);
6053 } else { /* NIC is not Quiescent. */
6054 DBG_PRINT(ERR_DBG
, "%s: Error: ", dev
->name
);
6055 DBG_PRINT(ERR_DBG
, "device is not Quiescent\n");
6056 netif_stop_queue(dev
);
6058 clear_bit(0, &(nic
->link_state
));
6061 static int set_rxd_buffer_pointer(nic_t
*sp
, RxD_t
*rxdp
, buffAdd_t
*ba
,
6062 struct sk_buff
**skb
, u64
*temp0
, u64
*temp1
,
6063 u64
*temp2
, int size
)
6065 struct net_device
*dev
= sp
->dev
;
6066 struct sk_buff
*frag_list
;
6068 if ((sp
->rxd_mode
== RXD_MODE_1
) && (rxdp
->Host_Control
== 0)) {
6071 DBG_PRINT(INFO_DBG
, "SKB is not NULL\n");
6073 * As Rx frame are not going to be processed,
6074 * using same mapped address for the Rxd
6077 ((RxD1_t
*)rxdp
)->Buffer0_ptr
= *temp0
;
6079 *skb
= dev_alloc_skb(size
);
6081 DBG_PRINT(ERR_DBG
, "%s: Out of ", dev
->name
);
6082 DBG_PRINT(ERR_DBG
, "memory to allocate SKBs\n");
6085 /* storing the mapped addr in a temp variable
6086 * such it will be used for next rxd whose
6087 * Host Control is NULL
6089 ((RxD1_t
*)rxdp
)->Buffer0_ptr
= *temp0
=
6090 pci_map_single( sp
->pdev
, (*skb
)->data
,
6091 size
- NET_IP_ALIGN
,
6092 PCI_DMA_FROMDEVICE
);
6093 rxdp
->Host_Control
= (unsigned long) (*skb
);
6095 } else if ((sp
->rxd_mode
== RXD_MODE_3B
) && (rxdp
->Host_Control
== 0)) {
6096 /* Two buffer Mode */
6098 ((RxD3_t
*)rxdp
)->Buffer2_ptr
= *temp2
;
6099 ((RxD3_t
*)rxdp
)->Buffer0_ptr
= *temp0
;
6100 ((RxD3_t
*)rxdp
)->Buffer1_ptr
= *temp1
;
6102 *skb
= dev_alloc_skb(size
);
6103 ((RxD3_t
*)rxdp
)->Buffer2_ptr
= *temp2
=
6104 pci_map_single(sp
->pdev
, (*skb
)->data
,
6106 PCI_DMA_FROMDEVICE
);
6107 ((RxD3_t
*)rxdp
)->Buffer0_ptr
= *temp0
=
6108 pci_map_single( sp
->pdev
, ba
->ba_0
, BUF0_LEN
,
6109 PCI_DMA_FROMDEVICE
);
6110 rxdp
->Host_Control
= (unsigned long) (*skb
);
6112 /* Buffer-1 will be dummy buffer not used */
6113 ((RxD3_t
*)rxdp
)->Buffer1_ptr
= *temp1
=
6114 pci_map_single(sp
->pdev
, ba
->ba_1
, BUF1_LEN
,
6115 PCI_DMA_FROMDEVICE
);
6117 } else if ((rxdp
->Host_Control
== 0)) {
6118 /* Three buffer mode */
6120 ((RxD3_t
*)rxdp
)->Buffer0_ptr
= *temp0
;
6121 ((RxD3_t
*)rxdp
)->Buffer1_ptr
= *temp1
;
6122 ((RxD3_t
*)rxdp
)->Buffer2_ptr
= *temp2
;
6124 *skb
= dev_alloc_skb(size
);
6126 ((RxD3_t
*)rxdp
)->Buffer0_ptr
= *temp0
=
6127 pci_map_single(sp
->pdev
, ba
->ba_0
, BUF0_LEN
,
6128 PCI_DMA_FROMDEVICE
);
6129 /* Buffer-1 receives L3/L4 headers */
6130 ((RxD3_t
*)rxdp
)->Buffer1_ptr
= *temp1
=
6131 pci_map_single( sp
->pdev
, (*skb
)->data
,
6133 PCI_DMA_FROMDEVICE
);
6135 * skb_shinfo(skb)->frag_list will have L4
6138 skb_shinfo(*skb
)->frag_list
= dev_alloc_skb(dev
->mtu
+
6140 if (skb_shinfo(*skb
)->frag_list
== NULL
) {
6141 DBG_PRINT(ERR_DBG
, "%s: dev_alloc_skb \
6142 failed\n ", dev
->name
);
6145 frag_list
= skb_shinfo(*skb
)->frag_list
;
6146 frag_list
->next
= NULL
;
6148 * Buffer-2 receives L4 data payload
6150 ((RxD3_t
*)rxdp
)->Buffer2_ptr
= *temp2
=
6151 pci_map_single( sp
->pdev
, frag_list
->data
,
6152 dev
->mtu
, PCI_DMA_FROMDEVICE
);
6157 static void set_rxd_buffer_size(nic_t
*sp
, RxD_t
*rxdp
, int size
)
6159 struct net_device
*dev
= sp
->dev
;
6160 if (sp
->rxd_mode
== RXD_MODE_1
) {
6161 rxdp
->Control_2
= SET_BUFFER0_SIZE_1( size
- NET_IP_ALIGN
);
6162 } else if (sp
->rxd_mode
== RXD_MODE_3B
) {
6163 rxdp
->Control_2
= SET_BUFFER0_SIZE_3(BUF0_LEN
);
6164 rxdp
->Control_2
|= SET_BUFFER1_SIZE_3(1);
6165 rxdp
->Control_2
|= SET_BUFFER2_SIZE_3( dev
->mtu
+ 4);
6167 rxdp
->Control_2
= SET_BUFFER0_SIZE_3(BUF0_LEN
);
6168 rxdp
->Control_2
|= SET_BUFFER1_SIZE_3(l3l4hdr_size
+ 4);
6169 rxdp
->Control_2
|= SET_BUFFER2_SIZE_3(dev
->mtu
);
6173 static int rxd_owner_bit_reset(nic_t
*sp
)
6175 int i
, j
, k
, blk_cnt
= 0, size
;
6176 mac_info_t
* mac_control
= &sp
->mac_control
;
6177 struct config_param
*config
= &sp
->config
;
6178 struct net_device
*dev
= sp
->dev
;
6180 struct sk_buff
*skb
= NULL
;
6181 buffAdd_t
*ba
= NULL
;
6182 u64 temp0_64
= 0, temp1_64
= 0, temp2_64
= 0;
6184 /* Calculate the size based on ring mode */
6185 size
= dev
->mtu
+ HEADER_ETHERNET_II_802_3_SIZE
+
6186 HEADER_802_2_SIZE
+ HEADER_SNAP_SIZE
;
6187 if (sp
->rxd_mode
== RXD_MODE_1
)
6188 size
+= NET_IP_ALIGN
;
6189 else if (sp
->rxd_mode
== RXD_MODE_3B
)
6190 size
= dev
->mtu
+ ALIGN_SIZE
+ BUF0_LEN
+ 4;
6192 size
= l3l4hdr_size
+ ALIGN_SIZE
+ BUF0_LEN
+ 4;
6194 for (i
= 0; i
< config
->rx_ring_num
; i
++) {
6195 blk_cnt
= config
->rx_cfg
[i
].num_rxd
/
6196 (rxd_count
[sp
->rxd_mode
] +1);
6198 for (j
= 0; j
< blk_cnt
; j
++) {
6199 for (k
= 0; k
< rxd_count
[sp
->rxd_mode
]; k
++) {
6200 rxdp
= mac_control
->rings
[i
].
6201 rx_blocks
[j
].rxds
[k
].virt_addr
;
6202 if(sp
->rxd_mode
>= RXD_MODE_3A
)
6203 ba
= &mac_control
->rings
[i
].ba
[j
][k
];
6204 set_rxd_buffer_pointer(sp
, rxdp
, ba
,
6205 &skb
,(u64
*)&temp0_64
,
6207 (u64
*)&temp2_64
, size
);
6209 set_rxd_buffer_size(sp
, rxdp
, size
);
6211 /* flip the Ownership bit to Hardware */
6212 rxdp
->Control_1
|= RXD_OWN_XENA
;
6220 static void s2io_card_down(nic_t
* sp
, int flag
)
6223 XENA_dev_config_t __iomem
*bar0
= sp
->bar0
;
6224 unsigned long flags
;
6225 register u64 val64
= 0;
6226 struct net_device
*dev
= sp
->dev
;
6228 del_timer_sync(&sp
->alarm_timer
);
6229 /* If s2io_set_link task is executing, wait till it completes. */
6230 while (test_and_set_bit(0, &(sp
->link_state
))) {
6233 atomic_set(&sp
->card_state
, CARD_DOWN
);
6235 /* disable Tx and Rx traffic on the NIC */
6238 if (sp
->intr_type
== MSI_X
) {
6242 for (i
=1; (sp
->s2io_entries
[i
].in_use
==
6243 MSIX_REGISTERED_SUCCESS
); i
++) {
6244 int vector
= sp
->entries
[i
].vector
;
6245 void *arg
= sp
->s2io_entries
[i
].arg
;
6247 free_irq(vector
, arg
);
6249 pci_read_config_word(sp
->pdev
, 0x42, &msi_control
);
6250 msi_control
&= 0xFFFE; /* Disable MSI */
6251 pci_write_config_word(sp
->pdev
, 0x42, msi_control
);
6252 pci_disable_msix(sp
->pdev
);
6254 free_irq(sp
->pdev
->irq
, dev
);
6255 if (sp
->intr_type
== MSI
)
6256 pci_disable_msi(sp
->pdev
);
6259 /* Waiting till all Interrupt handlers are complete */
6263 if (!atomic_read(&sp
->isr_cnt
))
6269 tasklet_kill(&sp
->task
);
6271 /* Check if the device is Quiescent and then Reset the NIC */
6273 /* As per the HW requirement we need to replenish the
6274 * receive buffer to avoid the ring bump. Since there is
6275 * no intention of processing the Rx frame at this pointwe are
6276 * just settting the ownership bit of rxd in Each Rx
6277 * ring to HW and set the appropriate buffer size
6278 * based on the ring mode
6280 rxd_owner_bit_reset(sp
);
6282 val64
= readq(&bar0
->adapter_status
);
6283 if (verify_xena_quiescence(sp
, val64
, sp
->device_enabled_once
)) {
6291 "s2io_close:Device not Quiescent ");
6292 DBG_PRINT(ERR_DBG
, "adaper status reads 0x%llx\n",
6293 (unsigned long long) val64
);
6299 spin_lock_irqsave(&sp
->tx_lock
, flags
);
6300 /* Free all Tx buffers */
6301 free_tx_buffers(sp
);
6302 spin_unlock_irqrestore(&sp
->tx_lock
, flags
);
6304 /* Free all Rx buffers */
6305 spin_lock_irqsave(&sp
->rx_lock
, flags
);
6306 free_rx_buffers(sp
);
6307 spin_unlock_irqrestore(&sp
->rx_lock
, flags
);
6309 clear_bit(0, &(sp
->link_state
));
6312 static int s2io_card_up(nic_t
* sp
)
6315 mac_info_t
*mac_control
;
6316 struct config_param
*config
;
6317 struct net_device
*dev
= (struct net_device
*) sp
->dev
;
6319 /* Initialize the H/W I/O registers */
6320 if (init_nic(sp
) != 0) {
6321 DBG_PRINT(ERR_DBG
, "%s: H/W initialization failed\n",
6326 if (sp
->intr_type
== MSI
)
6327 ret
= s2io_enable_msi(sp
);
6328 else if (sp
->intr_type
== MSI_X
)
6329 ret
= s2io_enable_msi_x(sp
);
6331 DBG_PRINT(ERR_DBG
, "%s: Defaulting to INTA\n", dev
->name
);
6332 sp
->intr_type
= INTA
;
6336 * Initializing the Rx buffers. For now we are considering only 1
6337 * Rx ring and initializing buffers into 30 Rx blocks
6339 mac_control
= &sp
->mac_control
;
6340 config
= &sp
->config
;
6342 for (i
= 0; i
< config
->rx_ring_num
; i
++) {
6343 if ((ret
= fill_rx_buffers(sp
, i
))) {
6344 DBG_PRINT(ERR_DBG
, "%s: Out of memory in Open\n",
6347 free_rx_buffers(sp
);
6350 DBG_PRINT(INFO_DBG
, "Buf in ring:%d is %d:\n", i
,
6351 atomic_read(&sp
->rx_bufs_left
[i
]));
6354 /* Setting its receive mode */
6355 s2io_set_multicast(dev
);
6358 /* Initialize max aggregatable pkts based on MTU */
6359 sp
->lro_max_aggr_per_sess
= ((1<<16) - 1) / dev
->mtu
;
6360 /* Check if we can use(if specified) user provided value */
6361 if (lro_max_pkts
< sp
->lro_max_aggr_per_sess
)
6362 sp
->lro_max_aggr_per_sess
= lro_max_pkts
;
6365 /* Enable tasklet for the device */
6366 tasklet_init(&sp
->task
, s2io_tasklet
, (unsigned long) dev
);
6368 /* Enable Rx Traffic and interrupts on the NIC */
6369 if (start_nic(sp
)) {
6370 DBG_PRINT(ERR_DBG
, "%s: Starting NIC failed\n", dev
->name
);
6371 tasklet_kill(&sp
->task
);
6373 free_irq(dev
->irq
, dev
);
6374 free_rx_buffers(sp
);
6378 S2IO_TIMER_CONF(sp
->alarm_timer
, s2io_alarm_handle
, sp
, (HZ
/2));
6380 atomic_set(&sp
->card_state
, CARD_UP
);
6385 * s2io_restart_nic - Resets the NIC.
6386 * @data : long pointer to the device private structure
6388 * This function is scheduled to be run by the s2io_tx_watchdog
6389 * function after 0.5 secs to reset the NIC. The idea is to reduce
6390 * the run time of the watch dog routine which is run holding a
6394 static void s2io_restart_nic(unsigned long data
)
6396 struct net_device
*dev
= (struct net_device
*) data
;
6397 nic_t
*sp
= dev
->priv
;
6399 s2io_card_down(sp
, 0);
6400 if (s2io_card_up(sp
)) {
6401 DBG_PRINT(ERR_DBG
, "%s: Device bring up failed\n",
6404 netif_wake_queue(dev
);
6405 DBG_PRINT(ERR_DBG
, "%s: was reset by Tx watchdog timer\n",
6411 * s2io_tx_watchdog - Watchdog for transmit side.
6412 * @dev : Pointer to net device structure
6414 * This function is triggered if the Tx Queue is stopped
6415 * for a pre-defined amount of time when the Interface is still up.
6416 * If the Interface is jammed in such a situation, the hardware is
6417 * reset (by s2io_close) and restarted again (by s2io_open) to
6418 * overcome any problem that might have been caused in the hardware.
6423 static void s2io_tx_watchdog(struct net_device
*dev
)
6425 nic_t
*sp
= dev
->priv
;
6427 if (netif_carrier_ok(dev
)) {
6428 schedule_work(&sp
->rst_timer_task
);
6429 sp
->mac_control
.stats_info
->sw_stat
.soft_reset_cnt
++;
6434 * rx_osm_handler - To perform some OS related operations on SKB.
6435 * @sp: private member of the device structure,pointer to s2io_nic structure.
6436 * @skb : the socket buffer pointer.
6437 * @len : length of the packet
6438 * @cksum : FCS checksum of the frame.
6439 * @ring_no : the ring from which this RxD was extracted.
6441 * This function is called by the Tx interrupt serivce routine to perform
6442 * some OS related operations on the SKB before passing it to the upper
6443 * layers. It mainly checks if the checksum is OK, if so adds it to the
6444 * SKBs cksum variable, increments the Rx packet count and passes the SKB
6445 * to the upper layer. If the checksum is wrong, it increments the Rx
6446 * packet error count, frees the SKB and returns error.
6448 * SUCCESS on success and -1 on failure.
6450 static int rx_osm_handler(ring_info_t
*ring_data
, RxD_t
* rxdp
)
6452 nic_t
*sp
= ring_data
->nic
;
6453 struct net_device
*dev
= (struct net_device
*) sp
->dev
;
6454 struct sk_buff
*skb
= (struct sk_buff
*)
6455 ((unsigned long) rxdp
->Host_Control
);
6456 int ring_no
= ring_data
->ring_no
;
6457 u16 l3_csum
, l4_csum
;
6458 unsigned long long err
= rxdp
->Control_1
& RXD_T_CODE
;
6464 /* Check for parity error */
6466 sp
->mac_control
.stats_info
->sw_stat
.parity_err_cnt
++;
6470 * Drop the packet if bad transfer code. Exception being
6471 * 0x5, which could be due to unsupported IPv6 extension header.
6472 * In this case, we let stack handle the packet.
6473 * Note that in this case, since checksum will be incorrect,
6474 * stack will validate the same.
6476 if (err
&& ((err
>> 48) != 0x5)) {
6477 DBG_PRINT(ERR_DBG
, "%s: Rx error Value: 0x%llx\n",
6479 sp
->stats
.rx_crc_errors
++;
6481 atomic_dec(&sp
->rx_bufs_left
[ring_no
]);
6482 rxdp
->Host_Control
= 0;
6487 /* Updating statistics */
6488 rxdp
->Host_Control
= 0;
6490 sp
->stats
.rx_packets
++;
6491 if (sp
->rxd_mode
== RXD_MODE_1
) {
6492 int len
= RXD_GET_BUFFER0_SIZE_1(rxdp
->Control_2
);
6494 sp
->stats
.rx_bytes
+= len
;
6497 } else if (sp
->rxd_mode
>= RXD_MODE_3A
) {
6498 int get_block
= ring_data
->rx_curr_get_info
.block_index
;
6499 int get_off
= ring_data
->rx_curr_get_info
.offset
;
6500 int buf0_len
= RXD_GET_BUFFER0_SIZE_3(rxdp
->Control_2
);
6501 int buf2_len
= RXD_GET_BUFFER2_SIZE_3(rxdp
->Control_2
);
6502 unsigned char *buff
= skb_push(skb
, buf0_len
);
6504 buffAdd_t
*ba
= &ring_data
->ba
[get_block
][get_off
];
6505 sp
->stats
.rx_bytes
+= buf0_len
+ buf2_len
;
6506 memcpy(buff
, ba
->ba_0
, buf0_len
);
6508 if (sp
->rxd_mode
== RXD_MODE_3A
) {
6509 int buf1_len
= RXD_GET_BUFFER1_SIZE_3(rxdp
->Control_2
);
6511 skb_put(skb
, buf1_len
);
6512 skb
->len
+= buf2_len
;
6513 skb
->data_len
+= buf2_len
;
6514 skb
->truesize
+= buf2_len
;
6515 skb_put(skb_shinfo(skb
)->frag_list
, buf2_len
);
6516 sp
->stats
.rx_bytes
+= buf1_len
;
6519 skb_put(skb
, buf2_len
);
6522 if ((rxdp
->Control_1
& TCP_OR_UDP_FRAME
) && ((!sp
->lro
) ||
6523 (sp
->lro
&& (!(rxdp
->Control_1
& RXD_FRAME_IP_FRAG
)))) &&
6525 l3_csum
= RXD_GET_L3_CKSUM(rxdp
->Control_1
);
6526 l4_csum
= RXD_GET_L4_CKSUM(rxdp
->Control_1
);
6527 if ((l3_csum
== L3_CKSUM_OK
) && (l4_csum
== L4_CKSUM_OK
)) {
6529 * NIC verifies if the Checksum of the received
6530 * frame is Ok or not and accordingly returns
6531 * a flag in the RxD.
6533 skb
->ip_summed
= CHECKSUM_UNNECESSARY
;
6539 ret
= s2io_club_tcp_session(skb
->data
, &tcp
,
6540 &tcp_len
, &lro
, rxdp
, sp
);
6542 case 3: /* Begin anew */
6545 case 1: /* Aggregate */
6547 lro_append_pkt(sp
, lro
,
6551 case 4: /* Flush session */
6553 lro_append_pkt(sp
, lro
,
6555 queue_rx_frame(lro
->parent
);
6556 clear_lro_session(lro
);
6557 sp
->mac_control
.stats_info
->
6558 sw_stat
.flush_max_pkts
++;
6561 case 2: /* Flush both */
6562 lro
->parent
->data_len
=
6564 sp
->mac_control
.stats_info
->
6565 sw_stat
.sending_both
++;
6566 queue_rx_frame(lro
->parent
);
6567 clear_lro_session(lro
);
6569 case 0: /* sessions exceeded */
6570 case -1: /* non-TCP or not
6574 * First pkt in session not
6575 * L3/L4 aggregatable
6580 "%s: Samadhana!!\n",
6587 * Packet with erroneous checksum, let the
6588 * upper layers deal with it.
6590 skb
->ip_summed
= CHECKSUM_NONE
;
6593 skb
->ip_summed
= CHECKSUM_NONE
;
6597 skb
->protocol
= eth_type_trans(skb
, dev
);
6598 #ifdef CONFIG_S2IO_NAPI
6599 if (sp
->vlgrp
&& RXD_GET_VLAN_TAG(rxdp
->Control_2
)) {
6600 /* Queueing the vlan frame to the upper layer */
6601 vlan_hwaccel_receive_skb(skb
, sp
->vlgrp
,
6602 RXD_GET_VLAN_TAG(rxdp
->Control_2
));
6604 netif_receive_skb(skb
);
6607 if (sp
->vlgrp
&& RXD_GET_VLAN_TAG(rxdp
->Control_2
)) {
6608 /* Queueing the vlan frame to the upper layer */
6609 vlan_hwaccel_rx(skb
, sp
->vlgrp
,
6610 RXD_GET_VLAN_TAG(rxdp
->Control_2
));
6617 queue_rx_frame(skb
);
6619 dev
->last_rx
= jiffies
;
6621 atomic_dec(&sp
->rx_bufs_left
[ring_no
]);
6626 * s2io_link - stops/starts the Tx queue.
6627 * @sp : private member of the device structure, which is a pointer to the
6628 * s2io_nic structure.
6629 * @link : inidicates whether link is UP/DOWN.
6631 * This function stops/starts the Tx queue depending on whether the link
6632 * status of the NIC is is down or up. This is called by the Alarm
6633 * interrupt handler whenever a link change interrupt comes up.
6638 static void s2io_link(nic_t
* sp
, int link
)
6640 struct net_device
*dev
= (struct net_device
*) sp
->dev
;
6642 if (link
!= sp
->last_link_state
) {
6643 if (link
== LINK_DOWN
) {
6644 DBG_PRINT(ERR_DBG
, "%s: Link down\n", dev
->name
);
6645 netif_carrier_off(dev
);
6647 DBG_PRINT(ERR_DBG
, "%s: Link Up\n", dev
->name
);
6648 netif_carrier_on(dev
);
6651 sp
->last_link_state
= link
;
6655 * get_xena_rev_id - to identify revision ID of xena.
6656 * @pdev : PCI Dev structure
6658 * Function to identify the Revision ID of xena.
6660 * returns the revision ID of the device.
6663 static int get_xena_rev_id(struct pci_dev
*pdev
)
6667 ret
= pci_read_config_byte(pdev
, PCI_REVISION_ID
, (u8
*) & id
);
6672 * s2io_init_pci -Initialization of PCI and PCI-X configuration registers .
6673 * @sp : private member of the device structure, which is a pointer to the
6674 * s2io_nic structure.
6676 * This function initializes a few of the PCI and PCI-X configuration registers
6677 * with recommended values.
6682 static void s2io_init_pci(nic_t
* sp
)
6684 u16 pci_cmd
= 0, pcix_cmd
= 0;
6686 /* Enable Data Parity Error Recovery in PCI-X command register. */
6687 pci_read_config_word(sp
->pdev
, PCIX_COMMAND_REGISTER
,
6689 pci_write_config_word(sp
->pdev
, PCIX_COMMAND_REGISTER
,
6691 pci_read_config_word(sp
->pdev
, PCIX_COMMAND_REGISTER
,
6694 /* Set the PErr Response bit in PCI command register. */
6695 pci_read_config_word(sp
->pdev
, PCI_COMMAND
, &pci_cmd
);
6696 pci_write_config_word(sp
->pdev
, PCI_COMMAND
,
6697 (pci_cmd
| PCI_COMMAND_PARITY
));
6698 pci_read_config_word(sp
->pdev
, PCI_COMMAND
, &pci_cmd
);
6701 MODULE_AUTHOR("Raghavendra Koushik <raghavendra.koushik@neterion.com>");
6702 MODULE_LICENSE("GPL");
6703 MODULE_VERSION(DRV_VERSION
);
6705 module_param(tx_fifo_num
, int, 0);
6706 module_param(rx_ring_num
, int, 0);
6707 module_param(rx_ring_mode
, int, 0);
6708 module_param_array(tx_fifo_len
, uint
, NULL
, 0);
6709 module_param_array(rx_ring_sz
, uint
, NULL
, 0);
6710 module_param_array(rts_frm_len
, uint
, NULL
, 0);
6711 module_param(use_continuous_tx_intrs
, int, 1);
6712 module_param(rmac_pause_time
, int, 0);
6713 module_param(mc_pause_threshold_q0q3
, int, 0);
6714 module_param(mc_pause_threshold_q4q7
, int, 0);
6715 module_param(shared_splits
, int, 0);
6716 module_param(tmac_util_period
, int, 0);
6717 module_param(rmac_util_period
, int, 0);
6718 module_param(bimodal
, bool, 0);
6719 module_param(l3l4hdr_size
, int , 0);
6720 #ifndef CONFIG_S2IO_NAPI
6721 module_param(indicate_max_pkts
, int, 0);
6723 module_param(rxsync_frequency
, int, 0);
6724 module_param(intr_type
, int, 0);
6725 module_param(lro
, int, 0);
6726 module_param(lro_max_pkts
, int, 0);
6728 static int s2io_verify_parm(struct pci_dev
*pdev
, u8
*dev_intr_type
)
6730 if ( tx_fifo_num
> 8) {
6731 DBG_PRINT(ERR_DBG
, "s2io: Requested number of Tx fifos not "
6733 DBG_PRINT(ERR_DBG
, "s2io: Default to 8 Tx fifos\n");
6736 if ( rx_ring_num
> 8) {
6737 DBG_PRINT(ERR_DBG
, "s2io: Requested number of Rx rings not "
6739 DBG_PRINT(ERR_DBG
, "s2io: Default to 8 Rx rings\n");
6742 #ifdef CONFIG_S2IO_NAPI
6743 if (*dev_intr_type
!= INTA
) {
6744 DBG_PRINT(ERR_DBG
, "s2io: NAPI cannot be enabled when "
6745 "MSI/MSI-X is enabled. Defaulting to INTA\n");
6746 *dev_intr_type
= INTA
;
6749 #ifndef CONFIG_PCI_MSI
6750 if (*dev_intr_type
!= INTA
) {
6751 DBG_PRINT(ERR_DBG
, "s2io: This kernel does not support"
6752 "MSI/MSI-X. Defaulting to INTA\n");
6753 *dev_intr_type
= INTA
;
6756 if (*dev_intr_type
> MSI_X
) {
6757 DBG_PRINT(ERR_DBG
, "s2io: Wrong intr_type requested. "
6758 "Defaulting to INTA\n");
6759 *dev_intr_type
= INTA
;
6762 if ((*dev_intr_type
== MSI_X
) &&
6763 ((pdev
->device
!= PCI_DEVICE_ID_HERC_WIN
) &&
6764 (pdev
->device
!= PCI_DEVICE_ID_HERC_UNI
))) {
6765 DBG_PRINT(ERR_DBG
, "s2io: Xframe I does not support MSI_X. "
6766 "Defaulting to INTA\n");
6767 *dev_intr_type
= INTA
;
6769 if (rx_ring_mode
> 3) {
6770 DBG_PRINT(ERR_DBG
, "s2io: Requested ring mode not supported\n");
6771 DBG_PRINT(ERR_DBG
, "s2io: Defaulting to 3-buffer mode\n");
6778 * s2io_init_nic - Initialization of the adapter .
6779 * @pdev : structure containing the PCI related information of the device.
6780 * @pre: List of PCI devices supported by the driver listed in s2io_tbl.
6782 * The function initializes an adapter identified by the pci_dec structure.
6783 * All OS related initialization including memory and device structure and
6784 * initlaization of the device private variable is done. Also the swapper
6785 * control register is initialized to enable read and write into the I/O
6786 * registers of the device.
6788 * returns 0 on success and negative on failure.
6791 static int __devinit
6792 s2io_init_nic(struct pci_dev
*pdev
, const struct pci_device_id
*pre
)
6795 struct net_device
*dev
;
6797 int dma_flag
= FALSE
;
6798 u32 mac_up
, mac_down
;
6799 u64 val64
= 0, tmp64
= 0;
6800 XENA_dev_config_t __iomem
*bar0
= NULL
;
6802 mac_info_t
*mac_control
;
6803 struct config_param
*config
;
6805 u8 dev_intr_type
= intr_type
;
6807 if ((ret
= s2io_verify_parm(pdev
, &dev_intr_type
)))
6810 if ((ret
= pci_enable_device(pdev
))) {
6812 "s2io_init_nic: pci_enable_device failed\n");
6816 if (!pci_set_dma_mask(pdev
, DMA_64BIT_MASK
)) {
6817 DBG_PRINT(INIT_DBG
, "s2io_init_nic: Using 64bit DMA\n");
6819 if (pci_set_consistent_dma_mask
6820 (pdev
, DMA_64BIT_MASK
)) {
6822 "Unable to obtain 64bit DMA for \
6823 consistent allocations\n");
6824 pci_disable_device(pdev
);
6827 } else if (!pci_set_dma_mask(pdev
, DMA_32BIT_MASK
)) {
6828 DBG_PRINT(INIT_DBG
, "s2io_init_nic: Using 32bit DMA\n");
6830 pci_disable_device(pdev
);
6833 if (dev_intr_type
!= MSI_X
) {
6834 if (pci_request_regions(pdev
, s2io_driver_name
)) {
6835 DBG_PRINT(ERR_DBG
, "Request Regions failed\n"),
6836 pci_disable_device(pdev
);
6841 if (!(request_mem_region(pci_resource_start(pdev
, 0),
6842 pci_resource_len(pdev
, 0), s2io_driver_name
))) {
6843 DBG_PRINT(ERR_DBG
, "bar0 Request Regions failed\n");
6844 pci_disable_device(pdev
);
6847 if (!(request_mem_region(pci_resource_start(pdev
, 2),
6848 pci_resource_len(pdev
, 2), s2io_driver_name
))) {
6849 DBG_PRINT(ERR_DBG
, "bar1 Request Regions failed\n");
6850 release_mem_region(pci_resource_start(pdev
, 0),
6851 pci_resource_len(pdev
, 0));
6852 pci_disable_device(pdev
);
6857 dev
= alloc_etherdev(sizeof(nic_t
));
6859 DBG_PRINT(ERR_DBG
, "Device allocation failed\n");
6860 pci_disable_device(pdev
);
6861 pci_release_regions(pdev
);
6865 pci_set_master(pdev
);
6866 pci_set_drvdata(pdev
, dev
);
6867 SET_MODULE_OWNER(dev
);
6868 SET_NETDEV_DEV(dev
, &pdev
->dev
);
6870 /* Private member variable initialized to s2io NIC structure */
6872 memset(sp
, 0, sizeof(nic_t
));
6875 sp
->high_dma_flag
= dma_flag
;
6876 sp
->device_enabled_once
= FALSE
;
6877 if (rx_ring_mode
== 1)
6878 sp
->rxd_mode
= RXD_MODE_1
;
6879 if (rx_ring_mode
== 2)
6880 sp
->rxd_mode
= RXD_MODE_3B
;
6881 if (rx_ring_mode
== 3)
6882 sp
->rxd_mode
= RXD_MODE_3A
;
6884 sp
->intr_type
= dev_intr_type
;
6886 if ((pdev
->device
== PCI_DEVICE_ID_HERC_WIN
) ||
6887 (pdev
->device
== PCI_DEVICE_ID_HERC_UNI
))
6888 sp
->device_type
= XFRAME_II_DEVICE
;
6890 sp
->device_type
= XFRAME_I_DEVICE
;
6894 /* Initialize some PCI/PCI-X fields of the NIC. */
6898 * Setting the device configuration parameters.
6899 * Most of these parameters can be specified by the user during
6900 * module insertion as they are module loadable parameters. If
6901 * these parameters are not not specified during load time, they
6902 * are initialized with default values.
6904 mac_control
= &sp
->mac_control
;
6905 config
= &sp
->config
;
6907 /* Tx side parameters. */
6908 config
->tx_fifo_num
= tx_fifo_num
;
6909 for (i
= 0; i
< MAX_TX_FIFOS
; i
++) {
6910 config
->tx_cfg
[i
].fifo_len
= tx_fifo_len
[i
];
6911 config
->tx_cfg
[i
].fifo_priority
= i
;
6914 /* mapping the QoS priority to the configured fifos */
6915 for (i
= 0; i
< MAX_TX_FIFOS
; i
++)
6916 config
->fifo_mapping
[i
] = fifo_map
[config
->tx_fifo_num
][i
];
6918 config
->tx_intr_type
= TXD_INT_TYPE_UTILZ
;
6919 for (i
= 0; i
< config
->tx_fifo_num
; i
++) {
6920 config
->tx_cfg
[i
].f_no_snoop
=
6921 (NO_SNOOP_TXD
| NO_SNOOP_TXD_BUFFER
);
6922 if (config
->tx_cfg
[i
].fifo_len
< 65) {
6923 config
->tx_intr_type
= TXD_INT_TYPE_PER_LIST
;
6927 /* + 2 because one Txd for skb->data and one Txd for UFO */
6928 config
->max_txds
= MAX_SKB_FRAGS
+ 2;
6930 /* Rx side parameters. */
6931 config
->rx_ring_num
= rx_ring_num
;
6932 for (i
= 0; i
< MAX_RX_RINGS
; i
++) {
6933 config
->rx_cfg
[i
].num_rxd
= rx_ring_sz
[i
] *
6934 (rxd_count
[sp
->rxd_mode
] + 1);
6935 config
->rx_cfg
[i
].ring_priority
= i
;
6938 for (i
= 0; i
< rx_ring_num
; i
++) {
6939 config
->rx_cfg
[i
].ring_org
= RING_ORG_BUFF1
;
6940 config
->rx_cfg
[i
].f_no_snoop
=
6941 (NO_SNOOP_RXD
| NO_SNOOP_RXD_BUFFER
);
6944 /* Setting Mac Control parameters */
6945 mac_control
->rmac_pause_time
= rmac_pause_time
;
6946 mac_control
->mc_pause_threshold_q0q3
= mc_pause_threshold_q0q3
;
6947 mac_control
->mc_pause_threshold_q4q7
= mc_pause_threshold_q4q7
;
6950 /* Initialize Ring buffer parameters. */
6951 for (i
= 0; i
< config
->rx_ring_num
; i
++)
6952 atomic_set(&sp
->rx_bufs_left
[i
], 0);
6954 /* Initialize the number of ISRs currently running */
6955 atomic_set(&sp
->isr_cnt
, 0);
6957 /* initialize the shared memory used by the NIC and the host */
6958 if (init_shared_mem(sp
)) {
6959 DBG_PRINT(ERR_DBG
, "%s: Memory allocation failed\n",
6962 goto mem_alloc_failed
;
6965 sp
->bar0
= ioremap(pci_resource_start(pdev
, 0),
6966 pci_resource_len(pdev
, 0));
6968 DBG_PRINT(ERR_DBG
, "%s: S2IO: cannot remap io mem1\n",
6971 goto bar0_remap_failed
;
6974 sp
->bar1
= ioremap(pci_resource_start(pdev
, 2),
6975 pci_resource_len(pdev
, 2));
6977 DBG_PRINT(ERR_DBG
, "%s: S2IO: cannot remap io mem2\n",
6980 goto bar1_remap_failed
;
6983 dev
->irq
= pdev
->irq
;
6984 dev
->base_addr
= (unsigned long) sp
->bar0
;
6986 /* Initializing the BAR1 address as the start of the FIFO pointer. */
6987 for (j
= 0; j
< MAX_TX_FIFOS
; j
++) {
6988 mac_control
->tx_FIFO_start
[j
] = (TxFIFO_element_t __iomem
*)
6989 (sp
->bar1
+ (j
* 0x00020000));
6992 /* Driver entry points */
6993 dev
->open
= &s2io_open
;
6994 dev
->stop
= &s2io_close
;
6995 dev
->hard_start_xmit
= &s2io_xmit
;
6996 dev
->get_stats
= &s2io_get_stats
;
6997 dev
->set_multicast_list
= &s2io_set_multicast
;
6998 dev
->do_ioctl
= &s2io_ioctl
;
6999 dev
->change_mtu
= &s2io_change_mtu
;
7000 SET_ETHTOOL_OPS(dev
, &netdev_ethtool_ops
);
7001 dev
->features
|= NETIF_F_HW_VLAN_TX
| NETIF_F_HW_VLAN_RX
;
7002 dev
->vlan_rx_register
= s2io_vlan_rx_register
;
7003 dev
->vlan_rx_kill_vid
= (void *)s2io_vlan_rx_kill_vid
;
7006 * will use eth_mac_addr() for dev->set_mac_address
7007 * mac address will be set every time dev->open() is called
7009 #if defined(CONFIG_S2IO_NAPI)
7010 dev
->poll
= s2io_poll
;
7014 #ifdef CONFIG_NET_POLL_CONTROLLER
7015 dev
->poll_controller
= s2io_netpoll
;
7018 dev
->features
|= NETIF_F_SG
| NETIF_F_IP_CSUM
;
7019 if (sp
->high_dma_flag
== TRUE
)
7020 dev
->features
|= NETIF_F_HIGHDMA
;
7022 dev
->features
|= NETIF_F_TSO
;
7024 if (sp
->device_type
& XFRAME_II_DEVICE
) {
7025 dev
->features
|= NETIF_F_UFO
;
7026 dev
->features
|= NETIF_F_HW_CSUM
;
7029 dev
->tx_timeout
= &s2io_tx_watchdog
;
7030 dev
->watchdog_timeo
= WATCH_DOG_TIMEOUT
;
7031 INIT_WORK(&sp
->rst_timer_task
,
7032 (void (*)(void *)) s2io_restart_nic
, dev
);
7033 INIT_WORK(&sp
->set_link_task
,
7034 (void (*)(void *)) s2io_set_link
, sp
);
7036 pci_save_state(sp
->pdev
);
7038 /* Setting swapper control on the NIC, for proper reset operation */
7039 if (s2io_set_swapper(sp
)) {
7040 DBG_PRINT(ERR_DBG
, "%s:swapper settings are wrong\n",
7043 goto set_swap_failed
;
7046 /* Verify if the Herc works on the slot its placed into */
7047 if (sp
->device_type
& XFRAME_II_DEVICE
) {
7048 mode
= s2io_verify_pci_mode(sp
);
7050 DBG_PRINT(ERR_DBG
, "%s: ", __FUNCTION__
);
7051 DBG_PRINT(ERR_DBG
, " Unsupported PCI bus mode\n");
7053 goto set_swap_failed
;
7057 /* Not needed for Herc */
7058 if (sp
->device_type
& XFRAME_I_DEVICE
) {
7060 * Fix for all "FFs" MAC address problems observed on
7063 fix_mac_address(sp
);
7068 * MAC address initialization.
7069 * For now only one mac address will be read and used.
7072 val64
= RMAC_ADDR_CMD_MEM_RD
| RMAC_ADDR_CMD_MEM_STROBE_NEW_CMD
|
7073 RMAC_ADDR_CMD_MEM_OFFSET(0 + MAC_MAC_ADDR_START_OFFSET
);
7074 writeq(val64
, &bar0
->rmac_addr_cmd_mem
);
7075 wait_for_cmd_complete(&bar0
->rmac_addr_cmd_mem
,
7076 RMAC_ADDR_CMD_MEM_STROBE_CMD_EXECUTING
);
7077 tmp64
= readq(&bar0
->rmac_addr_data0_mem
);
7078 mac_down
= (u32
) tmp64
;
7079 mac_up
= (u32
) (tmp64
>> 32);
7081 memset(sp
->def_mac_addr
[0].mac_addr
, 0, sizeof(ETH_ALEN
));
7083 sp
->def_mac_addr
[0].mac_addr
[3] = (u8
) (mac_up
);
7084 sp
->def_mac_addr
[0].mac_addr
[2] = (u8
) (mac_up
>> 8);
7085 sp
->def_mac_addr
[0].mac_addr
[1] = (u8
) (mac_up
>> 16);
7086 sp
->def_mac_addr
[0].mac_addr
[0] = (u8
) (mac_up
>> 24);
7087 sp
->def_mac_addr
[0].mac_addr
[5] = (u8
) (mac_down
>> 16);
7088 sp
->def_mac_addr
[0].mac_addr
[4] = (u8
) (mac_down
>> 24);
7090 /* Set the factory defined MAC address initially */
7091 dev
->addr_len
= ETH_ALEN
;
7092 memcpy(dev
->dev_addr
, sp
->def_mac_addr
, ETH_ALEN
);
7095 * Initialize the tasklet status and link state flags
7096 * and the card state parameter
7098 atomic_set(&(sp
->card_state
), 0);
7099 sp
->tasklet_status
= 0;
7102 /* Initialize spinlocks */
7103 spin_lock_init(&sp
->tx_lock
);
7104 #ifndef CONFIG_S2IO_NAPI
7105 spin_lock_init(&sp
->put_lock
);
7107 spin_lock_init(&sp
->rx_lock
);
7110 * SXE-002: Configure link and activity LED to init state
7113 subid
= sp
->pdev
->subsystem_device
;
7114 if ((subid
& 0xFF) >= 0x07) {
7115 val64
= readq(&bar0
->gpio_control
);
7116 val64
|= 0x0000800000000000ULL
;
7117 writeq(val64
, &bar0
->gpio_control
);
7118 val64
= 0x0411040400000000ULL
;
7119 writeq(val64
, (void __iomem
*) bar0
+ 0x2700);
7120 val64
= readq(&bar0
->gpio_control
);
7123 sp
->rx_csum
= 1; /* Rx chksum verify enabled by default */
7125 if (register_netdev(dev
)) {
7126 DBG_PRINT(ERR_DBG
, "Device registration failed\n");
7128 goto register_failed
;
7131 DBG_PRINT(ERR_DBG
, "%s: Neterion %s",dev
->name
, sp
->product_name
);
7132 DBG_PRINT(ERR_DBG
, "(rev %d), Driver version %s\n",
7133 get_xena_rev_id(sp
->pdev
),
7134 s2io_driver_version
);
7135 DBG_PRINT(ERR_DBG
, "Copyright(c) 2002-2005 Neterion Inc.\n");
7136 DBG_PRINT(ERR_DBG
, "%s: MAC ADDR: "
7137 "%02x:%02x:%02x:%02x:%02x:%02x\n", dev
->name
,
7138 sp
->def_mac_addr
[0].mac_addr
[0],
7139 sp
->def_mac_addr
[0].mac_addr
[1],
7140 sp
->def_mac_addr
[0].mac_addr
[2],
7141 sp
->def_mac_addr
[0].mac_addr
[3],
7142 sp
->def_mac_addr
[0].mac_addr
[4],
7143 sp
->def_mac_addr
[0].mac_addr
[5]);
7144 if (sp
->device_type
& XFRAME_II_DEVICE
) {
7145 mode
= s2io_print_pci_mode(sp
);
7147 DBG_PRINT(ERR_DBG
, " Unsupported PCI bus mode\n");
7149 unregister_netdev(dev
);
7150 goto set_swap_failed
;
7153 switch(sp
->rxd_mode
) {
7155 DBG_PRINT(ERR_DBG
, "%s: 1-Buffer receive mode enabled\n",
7159 DBG_PRINT(ERR_DBG
, "%s: 2-Buffer receive mode enabled\n",
7163 DBG_PRINT(ERR_DBG
, "%s: 3-Buffer receive mode enabled\n",
7167 #ifdef CONFIG_S2IO_NAPI
7168 DBG_PRINT(ERR_DBG
, "%s: NAPI enabled\n", dev
->name
);
7170 switch(sp
->intr_type
) {
7172 DBG_PRINT(ERR_DBG
, "%s: Interrupt type INTA\n", dev
->name
);
7175 DBG_PRINT(ERR_DBG
, "%s: Interrupt type MSI\n", dev
->name
);
7178 DBG_PRINT(ERR_DBG
, "%s: Interrupt type MSI-X\n", dev
->name
);
7182 DBG_PRINT(ERR_DBG
, "%s: Large receive offload enabled\n",
7185 /* Initialize device name */
7186 sprintf(sp
->name
, "%s Neterion %s", dev
->name
, sp
->product_name
);
7188 /* Initialize bimodal Interrupts */
7189 sp
->config
.bimodal
= bimodal
;
7190 if (!(sp
->device_type
& XFRAME_II_DEVICE
) && bimodal
) {
7191 sp
->config
.bimodal
= 0;
7192 DBG_PRINT(ERR_DBG
,"%s:Bimodal intr not supported by Xframe I\n",
7197 * Make Link state as off at this point, when the Link change
7198 * interrupt comes the state will be automatically changed to
7201 netif_carrier_off(dev
);
7212 free_shared_mem(sp
);
7213 pci_disable_device(pdev
);
7214 if (dev_intr_type
!= MSI_X
)
7215 pci_release_regions(pdev
);
7217 release_mem_region(pci_resource_start(pdev
, 0),
7218 pci_resource_len(pdev
, 0));
7219 release_mem_region(pci_resource_start(pdev
, 2),
7220 pci_resource_len(pdev
, 2));
7222 pci_set_drvdata(pdev
, NULL
);
7229 * s2io_rem_nic - Free the PCI device
7230 * @pdev: structure containing the PCI related information of the device.
7231 * Description: This function is called by the Pci subsystem to release a
7232 * PCI device and free up all resource held up by the device. This could
7233 * be in response to a Hot plug event or when the driver is to be removed
7237 static void __devexit
s2io_rem_nic(struct pci_dev
*pdev
)
7239 struct net_device
*dev
=
7240 (struct net_device
*) pci_get_drvdata(pdev
);
7244 DBG_PRINT(ERR_DBG
, "Driver Data is NULL!!\n");
7249 unregister_netdev(dev
);
7251 free_shared_mem(sp
);
7254 pci_disable_device(pdev
);
7255 if (sp
->intr_type
!= MSI_X
)
7256 pci_release_regions(pdev
);
7258 release_mem_region(pci_resource_start(pdev
, 0),
7259 pci_resource_len(pdev
, 0));
7260 release_mem_region(pci_resource_start(pdev
, 2),
7261 pci_resource_len(pdev
, 2));
7263 pci_set_drvdata(pdev
, NULL
);
7268 * s2io_starter - Entry point for the driver
7269 * Description: This function is the entry point for the driver. It verifies
7270 * the module loadable parameters and initializes PCI configuration space.
7273 int __init
s2io_starter(void)
7275 return pci_module_init(&s2io_driver
);
7279 * s2io_closer - Cleanup routine for the driver
7280 * Description: This function is the cleanup routine for the driver. It unregist * ers the driver.
7283 static void s2io_closer(void)
7285 pci_unregister_driver(&s2io_driver
);
7286 DBG_PRINT(INIT_DBG
, "cleanup done\n");
7289 module_init(s2io_starter
);
7290 module_exit(s2io_closer
);
7292 static int check_L2_lro_capable(u8
*buffer
, struct iphdr
**ip
,
7293 struct tcphdr
**tcp
, RxD_t
*rxdp
)
7296 u8 l2_type
= (u8
)((rxdp
->Control_1
>> 37) & 0x7), ip_len
;
7298 if (!(rxdp
->Control_1
& RXD_FRAME_PROTO_TCP
)) {
7299 DBG_PRINT(INIT_DBG
,"%s: Non-TCP frames not supported for LRO\n",
7305 * By default the VLAN field in the MAC is stripped by the card, if this
7306 * feature is turned off in rx_pa_cfg register, then the ip_off field
7307 * has to be shifted by a further 2 bytes
7310 case 0: /* DIX type */
7311 case 4: /* DIX type with VLAN */
7312 ip_off
= HEADER_ETHERNET_II_802_3_SIZE
;
7314 /* LLC, SNAP etc are considered non-mergeable */
7319 *ip
= (struct iphdr
*)((u8
*)buffer
+ ip_off
);
7320 ip_len
= (u8
)((*ip
)->ihl
);
7322 *tcp
= (struct tcphdr
*)((unsigned long)*ip
+ ip_len
);
7327 static int check_for_socket_match(lro_t
*lro
, struct iphdr
*ip
,
7330 DBG_PRINT(INFO_DBG
,"%s: Been here...\n", __FUNCTION__
);
7331 if ((lro
->iph
->saddr
!= ip
->saddr
) || (lro
->iph
->daddr
!= ip
->daddr
) ||
7332 (lro
->tcph
->source
!= tcp
->source
) || (lro
->tcph
->dest
!= tcp
->dest
))
7337 static inline int get_l4_pyld_length(struct iphdr
*ip
, struct tcphdr
*tcp
)
7339 return(ntohs(ip
->tot_len
) - (ip
->ihl
<< 2) - (tcp
->doff
<< 2));
7342 static void initiate_new_session(lro_t
*lro
, u8
*l2h
,
7343 struct iphdr
*ip
, struct tcphdr
*tcp
, u32 tcp_pyld_len
)
7345 DBG_PRINT(INFO_DBG
,"%s: Been here...\n", __FUNCTION__
);
7349 lro
->tcp_next_seq
= tcp_pyld_len
+ ntohl(tcp
->seq
);
7350 lro
->tcp_ack
= ntohl(tcp
->ack_seq
);
7352 lro
->total_len
= ntohs(ip
->tot_len
);
7355 * check if we saw TCP timestamp. Other consistency checks have
7356 * already been done.
7358 if (tcp
->doff
== 8) {
7360 ptr
= (u32
*)(tcp
+1);
7362 lro
->cur_tsval
= *(ptr
+1);
7363 lro
->cur_tsecr
= *(ptr
+2);
7368 static void update_L3L4_header(nic_t
*sp
, lro_t
*lro
)
7370 struct iphdr
*ip
= lro
->iph
;
7371 struct tcphdr
*tcp
= lro
->tcph
;
7373 StatInfo_t
*statinfo
= sp
->mac_control
.stats_info
;
7374 DBG_PRINT(INFO_DBG
,"%s: Been here...\n", __FUNCTION__
);
7376 /* Update L3 header */
7377 ip
->tot_len
= htons(lro
->total_len
);
7379 nchk
= ip_fast_csum((u8
*)lro
->iph
, ip
->ihl
);
7382 /* Update L4 header */
7383 tcp
->ack_seq
= lro
->tcp_ack
;
7384 tcp
->window
= lro
->window
;
7386 /* Update tsecr field if this session has timestamps enabled */
7388 u32
*ptr
= (u32
*)(tcp
+ 1);
7389 *(ptr
+2) = lro
->cur_tsecr
;
7392 /* Update counters required for calculation of
7393 * average no. of packets aggregated.
7395 statinfo
->sw_stat
.sum_avg_pkts_aggregated
+= lro
->sg_num
;
7396 statinfo
->sw_stat
.num_aggregations
++;
7399 static void aggregate_new_rx(lro_t
*lro
, struct iphdr
*ip
,
7400 struct tcphdr
*tcp
, u32 l4_pyld
)
7402 DBG_PRINT(INFO_DBG
,"%s: Been here...\n", __FUNCTION__
);
7403 lro
->total_len
+= l4_pyld
;
7404 lro
->frags_len
+= l4_pyld
;
7405 lro
->tcp_next_seq
+= l4_pyld
;
7408 /* Update ack seq no. and window ad(from this pkt) in LRO object */
7409 lro
->tcp_ack
= tcp
->ack_seq
;
7410 lro
->window
= tcp
->window
;
7414 /* Update tsecr and tsval from this packet */
7415 ptr
= (u32
*) (tcp
+ 1);
7416 lro
->cur_tsval
= *(ptr
+ 1);
7417 lro
->cur_tsecr
= *(ptr
+ 2);
7421 static int verify_l3_l4_lro_capable(lro_t
*l_lro
, struct iphdr
*ip
,
7422 struct tcphdr
*tcp
, u32 tcp_pyld_len
)
7426 DBG_PRINT(INFO_DBG
,"%s: Been here...\n", __FUNCTION__
);
7428 if (!tcp_pyld_len
) {
7429 /* Runt frame or a pure ack */
7433 if (ip
->ihl
!= 5) /* IP has options */
7436 if (tcp
->urg
|| tcp
->psh
|| tcp
->rst
|| tcp
->syn
|| tcp
->fin
||
7439 * Currently recognize only the ack control word and
7440 * any other control field being set would result in
7441 * flushing the LRO session
7447 * Allow only one TCP timestamp option. Don't aggregate if
7448 * any other options are detected.
7450 if (tcp
->doff
!= 5 && tcp
->doff
!= 8)
7453 if (tcp
->doff
== 8) {
7454 ptr
= (u8
*)(tcp
+ 1);
7455 while (*ptr
== TCPOPT_NOP
)
7457 if (*ptr
!= TCPOPT_TIMESTAMP
|| *(ptr
+1) != TCPOLEN_TIMESTAMP
)
7460 /* Ensure timestamp value increases monotonically */
7462 if (l_lro
->cur_tsval
> *((u32
*)(ptr
+2)))
7465 /* timestamp echo reply should be non-zero */
7466 if (*((u32
*)(ptr
+6)) == 0)
7474 s2io_club_tcp_session(u8
*buffer
, u8
**tcp
, u32
*tcp_len
, lro_t
**lro
,
7475 RxD_t
*rxdp
, nic_t
*sp
)
7478 struct tcphdr
*tcph
;
7481 if (!(ret
= check_L2_lro_capable(buffer
, &ip
, (struct tcphdr
**)tcp
,
7483 DBG_PRINT(INFO_DBG
,"IP Saddr: %x Daddr: %x\n",
7484 ip
->saddr
, ip
->daddr
);
7489 tcph
= (struct tcphdr
*)*tcp
;
7490 *tcp_len
= get_l4_pyld_length(ip
, tcph
);
7491 for (i
=0; i
<MAX_LRO_SESSIONS
; i
++) {
7492 lro_t
*l_lro
= &sp
->lro0_n
[i
];
7493 if (l_lro
->in_use
) {
7494 if (check_for_socket_match(l_lro
, ip
, tcph
))
7496 /* Sock pair matched */
7499 if ((*lro
)->tcp_next_seq
!= ntohl(tcph
->seq
)) {
7500 DBG_PRINT(INFO_DBG
, "%s:Out of order. expected "
7501 "0x%x, actual 0x%x\n", __FUNCTION__
,
7502 (*lro
)->tcp_next_seq
,
7505 sp
->mac_control
.stats_info
->
7506 sw_stat
.outof_sequence_pkts
++;
7511 if (!verify_l3_l4_lro_capable(l_lro
, ip
, tcph
,*tcp_len
))
7512 ret
= 1; /* Aggregate */
7514 ret
= 2; /* Flush both */
7520 /* Before searching for available LRO objects,
7521 * check if the pkt is L3/L4 aggregatable. If not
7522 * don't create new LRO session. Just send this
7525 if (verify_l3_l4_lro_capable(NULL
, ip
, tcph
, *tcp_len
)) {
7529 for (i
=0; i
<MAX_LRO_SESSIONS
; i
++) {
7530 lro_t
*l_lro
= &sp
->lro0_n
[i
];
7531 if (!(l_lro
->in_use
)) {
7533 ret
= 3; /* Begin anew */
7539 if (ret
== 0) { /* sessions exceeded */
7540 DBG_PRINT(INFO_DBG
,"%s:All LRO sessions already in use\n",
7548 initiate_new_session(*lro
, buffer
, ip
, tcph
, *tcp_len
);
7551 update_L3L4_header(sp
, *lro
);
7554 aggregate_new_rx(*lro
, ip
, tcph
, *tcp_len
);
7555 if ((*lro
)->sg_num
== sp
->lro_max_aggr_per_sess
) {
7556 update_L3L4_header(sp
, *lro
);
7557 ret
= 4; /* Flush the LRO */
7561 DBG_PRINT(ERR_DBG
,"%s:Dont know, can't say!!\n",
7569 static void clear_lro_session(lro_t
*lro
)
7571 static u16 lro_struct_size
= sizeof(lro_t
);
7573 memset(lro
, 0, lro_struct_size
);
7576 static void queue_rx_frame(struct sk_buff
*skb
)
7578 struct net_device
*dev
= skb
->dev
;
7580 skb
->protocol
= eth_type_trans(skb
, dev
);
7581 #ifdef CONFIG_S2IO_NAPI
7582 netif_receive_skb(skb
);
7588 static void lro_append_pkt(nic_t
*sp
, lro_t
*lro
, struct sk_buff
*skb
,
7591 struct sk_buff
*tmp
, *first
= lro
->parent
;
7593 first
->len
+= tcp_len
;
7594 first
->data_len
= lro
->frags_len
;
7595 skb_pull(skb
, (skb
->len
- tcp_len
));
7596 if ((tmp
= skb_shinfo(first
)->frag_list
)) {
7602 skb_shinfo(first
)->frag_list
= skb
;
7603 sp
->mac_control
.stats_info
->sw_stat
.clubbed_frms_cnt
++;