wl12xx: Use MODULE_ALIAS macro at correct postion for SPI bus
[linux-2.6/libata-dev.git] / drivers / net / wireless / wl12xx / wl1251_spi.c
blob27fdfaaeb0742c780d82ccaaf2138ed485675cec
1 /*
2 * This file is part of wl1251
4 * Copyright (C) 2008 Nokia Corporation
6 * Contact: Kalle Valo <kalle.valo@nokia.com>
8 * This program is free software; you can redistribute it and/or
9 * modify it under the terms of the GNU General Public License
10 * version 2 as published by the Free Software Foundation.
12 * This program is distributed in the hope that it will be useful, but
13 * WITHOUT ANY WARRANTY; without even the implied warranty of
14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
15 * General Public License for more details.
17 * You should have received a copy of the GNU General Public License
18 * along with this program; if not, write to the Free Software
19 * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
20 * 02110-1301 USA
24 #include <linux/irq.h>
25 #include <linux/module.h>
26 #include <linux/slab.h>
27 #include <linux/crc7.h>
28 #include <linux/spi/spi.h>
29 #include <linux/spi/wl12xx.h>
31 #include "wl1251.h"
32 #include "wl1251_reg.h"
33 #include "wl1251_spi.h"
35 static irqreturn_t wl1251_irq(int irq, void *cookie)
37 struct wl1251 *wl;
39 wl1251_debug(DEBUG_IRQ, "IRQ");
41 wl = cookie;
43 ieee80211_queue_work(wl->hw, &wl->irq_work);
45 return IRQ_HANDLED;
48 static struct spi_device *wl_to_spi(struct wl1251 *wl)
50 return wl->if_priv;
53 static void wl1251_spi_reset(struct wl1251 *wl)
55 u8 *cmd;
56 struct spi_transfer t;
57 struct spi_message m;
59 cmd = kzalloc(WSPI_INIT_CMD_LEN, GFP_KERNEL);
60 if (!cmd) {
61 wl1251_error("could not allocate cmd for spi reset");
62 return;
65 memset(&t, 0, sizeof(t));
66 spi_message_init(&m);
68 memset(cmd, 0xff, WSPI_INIT_CMD_LEN);
70 t.tx_buf = cmd;
71 t.len = WSPI_INIT_CMD_LEN;
72 spi_message_add_tail(&t, &m);
74 spi_sync(wl_to_spi(wl), &m);
76 wl1251_dump(DEBUG_SPI, "spi reset -> ", cmd, WSPI_INIT_CMD_LEN);
79 static void wl1251_spi_wake(struct wl1251 *wl)
81 u8 crc[WSPI_INIT_CMD_CRC_LEN], *cmd;
82 struct spi_transfer t;
83 struct spi_message m;
85 cmd = kzalloc(WSPI_INIT_CMD_LEN, GFP_KERNEL);
86 if (!cmd) {
87 wl1251_error("could not allocate cmd for spi init");
88 return;
91 memset(crc, 0, sizeof(crc));
92 memset(&t, 0, sizeof(t));
93 spi_message_init(&m);
96 * Set WSPI_INIT_COMMAND
97 * the data is being send from the MSB to LSB
99 cmd[2] = 0xff;
100 cmd[3] = 0xff;
101 cmd[1] = WSPI_INIT_CMD_START | WSPI_INIT_CMD_TX;
102 cmd[0] = 0;
103 cmd[7] = 0;
104 cmd[6] |= HW_ACCESS_WSPI_INIT_CMD_MASK << 3;
105 cmd[6] |= HW_ACCESS_WSPI_FIXED_BUSY_LEN & WSPI_INIT_CMD_FIXEDBUSY_LEN;
107 if (HW_ACCESS_WSPI_FIXED_BUSY_LEN == 0)
108 cmd[5] |= WSPI_INIT_CMD_DIS_FIXEDBUSY;
109 else
110 cmd[5] |= WSPI_INIT_CMD_EN_FIXEDBUSY;
112 cmd[5] |= WSPI_INIT_CMD_IOD | WSPI_INIT_CMD_IP | WSPI_INIT_CMD_CS
113 | WSPI_INIT_CMD_WSPI | WSPI_INIT_CMD_WS;
115 crc[0] = cmd[1];
116 crc[1] = cmd[0];
117 crc[2] = cmd[7];
118 crc[3] = cmd[6];
119 crc[4] = cmd[5];
121 cmd[4] |= crc7(0, crc, WSPI_INIT_CMD_CRC_LEN) << 1;
122 cmd[4] |= WSPI_INIT_CMD_END;
124 t.tx_buf = cmd;
125 t.len = WSPI_INIT_CMD_LEN;
126 spi_message_add_tail(&t, &m);
128 spi_sync(wl_to_spi(wl), &m);
130 wl1251_dump(DEBUG_SPI, "spi init -> ", cmd, WSPI_INIT_CMD_LEN);
133 static void wl1251_spi_reset_wake(struct wl1251 *wl)
135 wl1251_spi_reset(wl);
136 wl1251_spi_wake(wl);
139 static void wl1251_spi_read(struct wl1251 *wl, int addr, void *buf,
140 size_t len)
142 struct spi_transfer t[3];
143 struct spi_message m;
144 u8 *busy_buf;
145 u32 *cmd;
147 cmd = &wl->buffer_cmd;
148 busy_buf = wl->buffer_busyword;
150 *cmd = 0;
151 *cmd |= WSPI_CMD_READ;
152 *cmd |= (len << WSPI_CMD_BYTE_LENGTH_OFFSET) & WSPI_CMD_BYTE_LENGTH;
153 *cmd |= addr & WSPI_CMD_BYTE_ADDR;
155 spi_message_init(&m);
156 memset(t, 0, sizeof(t));
158 t[0].tx_buf = cmd;
159 t[0].len = 4;
160 spi_message_add_tail(&t[0], &m);
162 /* Busy and non busy words read */
163 t[1].rx_buf = busy_buf;
164 t[1].len = WL1251_BUSY_WORD_LEN;
165 spi_message_add_tail(&t[1], &m);
167 t[2].rx_buf = buf;
168 t[2].len = len;
169 spi_message_add_tail(&t[2], &m);
171 spi_sync(wl_to_spi(wl), &m);
173 /* FIXME: check busy words */
175 wl1251_dump(DEBUG_SPI, "spi_read cmd -> ", cmd, sizeof(*cmd));
176 wl1251_dump(DEBUG_SPI, "spi_read buf <- ", buf, len);
179 static void wl1251_spi_write(struct wl1251 *wl, int addr, void *buf,
180 size_t len)
182 struct spi_transfer t[2];
183 struct spi_message m;
184 u32 *cmd;
186 cmd = &wl->buffer_cmd;
188 *cmd = 0;
189 *cmd |= WSPI_CMD_WRITE;
190 *cmd |= (len << WSPI_CMD_BYTE_LENGTH_OFFSET) & WSPI_CMD_BYTE_LENGTH;
191 *cmd |= addr & WSPI_CMD_BYTE_ADDR;
193 spi_message_init(&m);
194 memset(t, 0, sizeof(t));
196 t[0].tx_buf = cmd;
197 t[0].len = sizeof(*cmd);
198 spi_message_add_tail(&t[0], &m);
200 t[1].tx_buf = buf;
201 t[1].len = len;
202 spi_message_add_tail(&t[1], &m);
204 spi_sync(wl_to_spi(wl), &m);
206 wl1251_dump(DEBUG_SPI, "spi_write cmd -> ", cmd, sizeof(*cmd));
207 wl1251_dump(DEBUG_SPI, "spi_write buf -> ", buf, len);
210 static void wl1251_spi_enable_irq(struct wl1251 *wl)
212 return enable_irq(wl->irq);
215 static void wl1251_spi_disable_irq(struct wl1251 *wl)
217 return disable_irq(wl->irq);
220 static const struct wl1251_if_operations wl1251_spi_ops = {
221 .read = wl1251_spi_read,
222 .write = wl1251_spi_write,
223 .reset = wl1251_spi_reset_wake,
224 .enable_irq = wl1251_spi_enable_irq,
225 .disable_irq = wl1251_spi_disable_irq,
228 static int __devinit wl1251_spi_probe(struct spi_device *spi)
230 struct wl12xx_platform_data *pdata;
231 struct ieee80211_hw *hw;
232 struct wl1251 *wl;
233 int ret;
235 pdata = spi->dev.platform_data;
236 if (!pdata) {
237 wl1251_error("no platform data");
238 return -ENODEV;
241 hw = wl1251_alloc_hw();
242 if (IS_ERR(hw))
243 return PTR_ERR(hw);
245 wl = hw->priv;
247 SET_IEEE80211_DEV(hw, &spi->dev);
248 dev_set_drvdata(&spi->dev, wl);
249 wl->if_priv = spi;
250 wl->if_ops = &wl1251_spi_ops;
252 /* This is the only SPI value that we need to set here, the rest
253 * comes from the board-peripherals file */
254 spi->bits_per_word = 32;
256 ret = spi_setup(spi);
257 if (ret < 0) {
258 wl1251_error("spi_setup failed");
259 goto out_free;
262 wl->set_power = pdata->set_power;
263 if (!wl->set_power) {
264 wl1251_error("set power function missing in platform data");
265 return -ENODEV;
268 wl->irq = spi->irq;
269 if (wl->irq < 0) {
270 wl1251_error("irq missing in platform data");
271 return -ENODEV;
274 wl->use_eeprom = pdata->use_eeprom;
276 ret = request_irq(wl->irq, wl1251_irq, 0, DRIVER_NAME, wl);
277 if (ret < 0) {
278 wl1251_error("request_irq() failed: %d", ret);
279 goto out_free;
282 set_irq_type(wl->irq, IRQ_TYPE_EDGE_RISING);
284 disable_irq(wl->irq);
286 ret = wl1251_init_ieee80211(wl);
287 if (ret)
288 goto out_irq;
290 return 0;
292 out_irq:
293 free_irq(wl->irq, wl);
295 out_free:
296 ieee80211_free_hw(hw);
298 return ret;
301 static int __devexit wl1251_spi_remove(struct spi_device *spi)
303 struct wl1251 *wl = dev_get_drvdata(&spi->dev);
305 free_irq(wl->irq, wl);
306 wl1251_free_hw(wl);
308 return 0;
311 static struct spi_driver wl1251_spi_driver = {
312 .driver = {
313 .name = DRIVER_NAME,
314 .bus = &spi_bus_type,
315 .owner = THIS_MODULE,
318 .probe = wl1251_spi_probe,
319 .remove = __devexit_p(wl1251_spi_remove),
322 static int __init wl1251_spi_init(void)
324 int ret;
326 ret = spi_register_driver(&wl1251_spi_driver);
327 if (ret < 0) {
328 wl1251_error("failed to register spi driver: %d", ret);
329 goto out;
332 out:
333 return ret;
336 static void __exit wl1251_spi_exit(void)
338 spi_unregister_driver(&wl1251_spi_driver);
340 wl1251_notice("unloaded");
343 module_init(wl1251_spi_init);
344 module_exit(wl1251_spi_exit);
346 MODULE_LICENSE("GPL");
347 MODULE_AUTHOR("Kalle Valo <kalle.valo@nokia.com>");
348 MODULE_ALIAS("spi:wl1251");