?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
[PATCH] 8139cp - module_param
[linux-2.6/libata-dev.git] / drivers / net / au1000_eth.c
blob5a2efd343db48be907bdfecfc34d6633f4370c37
1 /*
2 *
3 * Alchemy Au1x00 ethernet driver
4 *
5 * Copyright 2001,2002,2003 MontaVista Software Inc.
6 * Copyright 2002 TimeSys Corp.
7 * Added ethtool/mii-tool support,
8 * Copyright 2004 Matt Porter <mporter@kernel.crashing.org>
9 * Update: 2004 Bjoern Riemer, riemer@fokus.fraunhofer.de
10 * or riemer@riemer-nt.de: fixed the link beat detection with
11 * ioctls (SIOCGMIIPHY)
12 * Author: MontaVista Software, Inc.
13 * ppopov@mvista.com or source@mvista.com
14 *
15 * ########################################################################
16 *
17 * This program is free software; you can distribute it and/or modify it
18 * under the terms of the GNU General Public License (Version 2) as
19 * published by the Free Software Foundation.
20 *
21 * This program is distributed in the hope it will be useful, but WITHOUT
22 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
23 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
24 * for more details.
25 *
26 * You should have received a copy of the GNU General Public License along
27 * with this program; if not, write to the Free Software Foundation, Inc.,
28 * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
29 *
30 * ########################################################################
31 *
32 *
33 */
34
35 #include <linux/module.h>
36 #include <linux/kernel.h>
37 #include <linux/sched.h>
38 #include <linux/string.h>
39 #include <linux/timer.h>
40 #include <linux/errno.h>
41 #include <linux/in.h>
42 #include <linux/ioport.h>
43 #include <linux/bitops.h>
44 #include <linux/slab.h>
45 #include <linux/interrupt.h>
46 #include <linux/pci.h>
47 #include <linux/init.h>
48 #include <linux/netdevice.h>
49 #include <linux/etherdevice.h>
50 #include <linux/ethtool.h>
51 #include <linux/mii.h>
52 #include <linux/skbuff.h>
53 #include <linux/delay.h>
54 #include <asm/mipsregs.h>
55 #include <asm/irq.h>
56 #include <asm/io.h>
57 #include <asm/processor.h>
58
59 #include <asm/mach-au1x00/au1000.h>
60 #include <asm/cpu.h>
61 #include "au1000_eth.h"
62
63 #ifdef AU1000_ETH_DEBUG
64 static int au1000_debug = 5;
65 #else
66 static int au1000_debug = 3;
67 #endif
68
69 #define DRV_NAME "au1000eth"
70 #define DRV_VERSION "1.5"
71 #define DRV_AUTHOR "Pete Popov <ppopov@embeddedalley.com>"
72 #define DRV_DESC "Au1xxx on-chip Ethernet driver"
73
74 MODULE_AUTHOR(DRV_AUTHOR);
75 MODULE_DESCRIPTION(DRV_DESC);
76 MODULE_LICENSE("GPL");
77
78 // prototypes
79 static void hard_stop(struct net_device *);
80 static void enable_rx_tx(struct net_device *dev);
81 static struct net_device * au1000_probe(u32 ioaddr, int irq, int port_num);
82 static int au1000_init(struct net_device *);
83 static int au1000_open(struct net_device *);
84 static int au1000_close(struct net_device *);
85 static int au1000_tx(struct sk_buff *, struct net_device *);
86 static int au1000_rx(struct net_device *);
87 static irqreturn_t au1000_interrupt(int, void *, struct pt_regs *);
88 static void au1000_tx_timeout(struct net_device *);
89 static int au1000_set_config(struct net_device *dev, struct ifmap *map);
90 static void set_rx_mode(struct net_device *);
91 static struct net_device_stats *au1000_get_stats(struct net_device *);
92 static inline void update_tx_stats(struct net_device *, u32, u32);
93 static inline void update_rx_stats(struct net_device *, u32);
94 static void au1000_timer(unsigned long);
95 static int au1000_ioctl(struct net_device *, struct ifreq *, int);
96 static int mdio_read(struct net_device *, int, int);
97 static void mdio_write(struct net_device *, int, int, u16);
98 static void dump_mii(struct net_device *dev, int phy_id);
99
100 // externs
101 extern void ack_rise_edge_irq(unsigned int);
102 extern int get_ethernet_addr(char *ethernet_addr);
103 extern void str2eaddr(unsigned char *ea, unsigned char *str);
104 extern char * __init prom_getcmdline(void);
105
106 /*
107 * Theory of operation
108 *
109 * The Au1000 MACs use a simple rx and tx descriptor ring scheme.
110 * There are four receive and four transmit descriptors. These
111 * descriptors are not in memory; rather, they are just a set of
112 * hardware registers.
113 *
114 * Since the Au1000 has a coherent data cache, the receive and
115 * transmit buffers are allocated from the KSEG0 segment. The
116 * hardware registers, however, are still mapped at KSEG1 to
117 * make sure there's no out-of-order writes, and that all writes
118 * complete immediately.
119 */
120
121 /* These addresses are only used if yamon doesn't tell us what
122 * the mac address is, and the mac address is not passed on the
123 * command line.
124 */
125 static unsigned char au1000_mac_addr[6] __devinitdata = {
126 0x00, 0x50, 0xc2, 0x0c, 0x30, 0x00
127 };
128
129 #define nibswap(x) ((((x) >> 4) & 0x0f) | (((x) << 4) & 0xf0))
130 #define RUN_AT(x) (jiffies + (x))
131
132 // For reading/writing 32-bit words from/to DMA memory
133 #define cpu_to_dma32 cpu_to_be32
134 #define dma32_to_cpu be32_to_cpu
135
136 struct au1000_private *au_macs[NUM_ETH_INTERFACES];
137
138 /* FIXME
139 * All of the PHY code really should be detached from the MAC
140 * code.
141 */
142
143 /* Default advertise */
144 #define GENMII_DEFAULT_ADVERTISE \
145 ADVERTISED_10baseT_Half | ADVERTISED_10baseT_Full | \
146 ADVERTISED_100baseT_Half | ADVERTISED_100baseT_Full | \
147 ADVERTISED_Autoneg
148
149 #define GENMII_DEFAULT_FEATURES \
150 SUPPORTED_10baseT_Half | SUPPORTED_10baseT_Full | \
151 SUPPORTED_100baseT_Half | SUPPORTED_100baseT_Full | \
152 SUPPORTED_Autoneg
153
154 static char *phy_link[] =
155 { "unknown",
156 "10Base2", "10BaseT",
157 "AUI",
158 "100BaseT", "100BaseTX", "100BaseFX"
159 };
160
161 int bcm_5201_init(struct net_device *dev, int phy_addr)
162 {
163 s16 data;
164
165 /* Stop auto-negotiation */
166 data = mdio_read(dev, phy_addr, MII_CONTROL);
167 mdio_write(dev, phy_addr, MII_CONTROL, data & ~MII_CNTL_AUTO);
168
169 /* Set advertisement to 10/100 and Half/Full duplex
170 * (full capabilities) */
171 data = mdio_read(dev, phy_addr, MII_ANADV);
172 data |= MII_NWAY_TX | MII_NWAY_TX_FDX | MII_NWAY_T_FDX | MII_NWAY_T;
173 mdio_write(dev, phy_addr, MII_ANADV, data);
174
175 /* Restart auto-negotiation */
176 data = mdio_read(dev, phy_addr, MII_CONTROL);
177 data |= MII_CNTL_RST_AUTO | MII_CNTL_AUTO;
178 mdio_write(dev, phy_addr, MII_CONTROL, data);
179
180 if (au1000_debug > 4)
181 dump_mii(dev, phy_addr);
182 return 0;
183 }
184
185 int bcm_5201_reset(struct net_device *dev, int phy_addr)
186 {
187 s16 mii_control, timeout;
188
189 mii_control = mdio_read(dev, phy_addr, MII_CONTROL);
190 mdio_write(dev, phy_addr, MII_CONTROL, mii_control | MII_CNTL_RESET);
191 mdelay(1);
192 for (timeout = 100; timeout > 0; --timeout) {
193 mii_control = mdio_read(dev, phy_addr, MII_CONTROL);
194 if ((mii_control & MII_CNTL_RESET) == 0)
195 break;
196 mdelay(1);
197 }
198 if (mii_control & MII_CNTL_RESET) {
199 printk(KERN_ERR "%s PHY reset timeout !\n", dev->name);
200 return -1;
201 }
202 return 0;
203 }
204
205 int
206 bcm_5201_status(struct net_device *dev, int phy_addr, u16 *link, u16 *speed)
207 {
208 u16 mii_data;
209 struct au1000_private *aup;
210
211 if (!dev) {
212 printk(KERN_ERR "bcm_5201_status error: NULL dev\n");
213 return -1;
214 }
215 aup = (struct au1000_private *) dev->priv;
216
217 mii_data = mdio_read(dev, aup->phy_addr, MII_STATUS);
218 if (mii_data & MII_STAT_LINK) {
219 *link = 1;
220 mii_data = mdio_read(dev, aup->phy_addr, MII_AUX_CNTRL);
221 if (mii_data & MII_AUX_100) {
222 if (mii_data & MII_AUX_FDX) {
223 *speed = IF_PORT_100BASEFX;
224 dev->if_port = IF_PORT_100BASEFX;
225 }
226 else {
227 *speed = IF_PORT_100BASETX;
228 dev->if_port = IF_PORT_100BASETX;
229 }
230 }
231 else {
232 *speed = IF_PORT_10BASET;
233 dev->if_port = IF_PORT_10BASET;
234 }
235
236 }
237 else {
238 *link = 0;
239 *speed = 0;
240 dev->if_port = IF_PORT_UNKNOWN;
241 }
242 return 0;
243 }
244
245 int lsi_80227_init(struct net_device *dev, int phy_addr)
246 {
247 if (au1000_debug > 4)
248 printk("lsi_80227_init\n");
249
250 /* restart auto-negotiation */
251 mdio_write(dev, phy_addr, MII_CONTROL,
252 MII_CNTL_F100 | MII_CNTL_AUTO | MII_CNTL_RST_AUTO); // | MII_CNTL_FDX);
253 mdelay(1);
254
255 /* set up LEDs to correct display */
256 #ifdef CONFIG_MIPS_MTX1
257 mdio_write(dev, phy_addr, 17, 0xff80);
258 #else
259 mdio_write(dev, phy_addr, 17, 0xffc0);
260 #endif
261
262 if (au1000_debug > 4)
263 dump_mii(dev, phy_addr);
264 return 0;
265 }
266
267 int lsi_80227_reset(struct net_device *dev, int phy_addr)
268 {
269 s16 mii_control, timeout;
270
271 if (au1000_debug > 4) {
272 printk("lsi_80227_reset\n");
273 dump_mii(dev, phy_addr);
274 }
275
276 mii_control = mdio_read(dev, phy_addr, MII_CONTROL);
277 mdio_write(dev, phy_addr, MII_CONTROL, mii_control | MII_CNTL_RESET);
278 mdelay(1);
279 for (timeout = 100; timeout > 0; --timeout) {
280 mii_control = mdio_read(dev, phy_addr, MII_CONTROL);
281 if ((mii_control & MII_CNTL_RESET) == 0)
282 break;
283 mdelay(1);
284 }
285 if (mii_control & MII_CNTL_RESET) {
286 printk(KERN_ERR "%s PHY reset timeout !\n", dev->name);
287 return -1;
288 }
289 return 0;
290 }
291
292 int
293 lsi_80227_status(struct net_device *dev, int phy_addr, u16 *link, u16 *speed)
294 {
295 u16 mii_data;
296 struct au1000_private *aup;
297
298 if (!dev) {
299 printk(KERN_ERR "lsi_80227_status error: NULL dev\n");
300 return -1;
301 }
302 aup = (struct au1000_private *) dev->priv;
303
304 mii_data = mdio_read(dev, aup->phy_addr, MII_STATUS);
305 if (mii_data & MII_STAT_LINK) {
306 *link = 1;
307 mii_data = mdio_read(dev, aup->phy_addr, MII_LSI_PHY_STAT);
308 if (mii_data & MII_LSI_PHY_STAT_SPD) {
309 if (mii_data & MII_LSI_PHY_STAT_FDX) {
310 *speed = IF_PORT_100BASEFX;
311 dev->if_port = IF_PORT_100BASEFX;
312 }
313 else {
314 *speed = IF_PORT_100BASETX;
315 dev->if_port = IF_PORT_100BASETX;
316 }
317 }
318 else {
319 *speed = IF_PORT_10BASET;
320 dev->if_port = IF_PORT_10BASET;
321 }
322
323 }
324 else {
325 *link = 0;
326 *speed = 0;
327 dev->if_port = IF_PORT_UNKNOWN;
328 }
329 return 0;
330 }
331
332 int am79c901_init(struct net_device *dev, int phy_addr)
333 {
334 printk("am79c901_init\n");
335 return 0;
336 }
337
338 int am79c901_reset(struct net_device *dev, int phy_addr)
339 {
340 printk("am79c901_reset\n");
341 return 0;
342 }
343
344 int
345 am79c901_status(struct net_device *dev, int phy_addr, u16 *link, u16 *speed)
346 {
347 return 0;
348 }
349
350 int am79c874_init(struct net_device *dev, int phy_addr)
351 {
352 s16 data;
353
354 /* 79c874 has quit resembled bit assignments to BCM5201 */
355 if (au1000_debug > 4)
356 printk("am79c847_init\n");
357
358 /* Stop auto-negotiation */
359 data = mdio_read(dev, phy_addr, MII_CONTROL);
360 mdio_write(dev, phy_addr, MII_CONTROL, data & ~MII_CNTL_AUTO);
361
362 /* Set advertisement to 10/100 and Half/Full duplex
363 * (full capabilities) */
364 data = mdio_read(dev, phy_addr, MII_ANADV);
365 data |= MII_NWAY_TX | MII_NWAY_TX_FDX | MII_NWAY_T_FDX | MII_NWAY_T;
366 mdio_write(dev, phy_addr, MII_ANADV, data);
367
368 /* Restart auto-negotiation */
369 data = mdio_read(dev, phy_addr, MII_CONTROL);
370 data |= MII_CNTL_RST_AUTO | MII_CNTL_AUTO;
371
372 mdio_write(dev, phy_addr, MII_CONTROL, data);
373
374 if (au1000_debug > 4) dump_mii(dev, phy_addr);
375 return 0;
376 }
377
378 int am79c874_reset(struct net_device *dev, int phy_addr)
379 {
380 s16 mii_control, timeout;
381
382 if (au1000_debug > 4)
383 printk("am79c874_reset\n");
384
385 mii_control = mdio_read(dev, phy_addr, MII_CONTROL);
386 mdio_write(dev, phy_addr, MII_CONTROL, mii_control | MII_CNTL_RESET);
387 mdelay(1);
388 for (timeout = 100; timeout > 0; --timeout) {
389 mii_control = mdio_read(dev, phy_addr, MII_CONTROL);
390 if ((mii_control & MII_CNTL_RESET) == 0)
391 break;
392 mdelay(1);
393 }
394 if (mii_control & MII_CNTL_RESET) {
395 printk(KERN_ERR "%s PHY reset timeout !\n", dev->name);
396 return -1;
397 }
398 return 0;
399 }
400
401 int
402 am79c874_status(struct net_device *dev, int phy_addr, u16 *link, u16 *speed)
403 {
404 u16 mii_data;
405 struct au1000_private *aup;
406
407 // printk("am79c874_status\n");
408 if (!dev) {
409 printk(KERN_ERR "am79c874_status error: NULL dev\n");
410 return -1;
411 }
412
413 aup = (struct au1000_private *) dev->priv;
414 mii_data = mdio_read(dev, aup->phy_addr, MII_STATUS);
415
416 if (mii_data & MII_STAT_LINK) {
417 *link = 1;
418 mii_data = mdio_read(dev, aup->phy_addr, MII_AMD_PHY_STAT);
419 if (mii_data & MII_AMD_PHY_STAT_SPD) {
420 if (mii_data & MII_AMD_PHY_STAT_FDX) {
421 *speed = IF_PORT_100BASEFX;
422 dev->if_port = IF_PORT_100BASEFX;
423 }
424 else {
425 *speed = IF_PORT_100BASETX;
426 dev->if_port = IF_PORT_100BASETX;
427 }
428 }
429 else {
430 *speed = IF_PORT_10BASET;
431 dev->if_port = IF_PORT_10BASET;
432 }
433
434 }
435 else {
436 *link = 0;
437 *speed = 0;
438 dev->if_port = IF_PORT_UNKNOWN;
439 }
440 return 0;
441 }
442
443 int lxt971a_init(struct net_device *dev, int phy_addr)
444 {
445 if (au1000_debug > 4)
446 printk("lxt971a_init\n");
447
448 /* restart auto-negotiation */
449 mdio_write(dev, phy_addr, MII_CONTROL,
450 MII_CNTL_F100 | MII_CNTL_AUTO | MII_CNTL_RST_AUTO | MII_CNTL_FDX);
451
452 /* set up LEDs to correct display */
453 mdio_write(dev, phy_addr, 20, 0x0422);
454
455 if (au1000_debug > 4)
456 dump_mii(dev, phy_addr);
457 return 0;
458 }
459
460 int lxt971a_reset(struct net_device *dev, int phy_addr)
461 {
462 s16 mii_control, timeout;
463
464 if (au1000_debug > 4) {
465 printk("lxt971a_reset\n");
466 dump_mii(dev, phy_addr);
467 }
468
469 mii_control = mdio_read(dev, phy_addr, MII_CONTROL);
470 mdio_write(dev, phy_addr, MII_CONTROL, mii_control | MII_CNTL_RESET);
471 mdelay(1);
472 for (timeout = 100; timeout > 0; --timeout) {
473 mii_control = mdio_read(dev, phy_addr, MII_CONTROL);
474 if ((mii_control & MII_CNTL_RESET) == 0)
475 break;
476 mdelay(1);
477 }
478 if (mii_control & MII_CNTL_RESET) {
479 printk(KERN_ERR "%s PHY reset timeout !\n", dev->name);
480 return -1;
481 }
482 return 0;
483 }
484
485 int
486 lxt971a_status(struct net_device *dev, int phy_addr, u16 *link, u16 *speed)
487 {
488 u16 mii_data;
489 struct au1000_private *aup;
490
491 if (!dev) {
492 printk(KERN_ERR "lxt971a_status error: NULL dev\n");
493 return -1;
494 }
495 aup = (struct au1000_private *) dev->priv;
496
497 mii_data = mdio_read(dev, aup->phy_addr, MII_STATUS);
498 if (mii_data & MII_STAT_LINK) {
499 *link = 1;
500 mii_data = mdio_read(dev, aup->phy_addr, MII_INTEL_PHY_STAT);
501 if (mii_data & MII_INTEL_PHY_STAT_SPD) {
502 if (mii_data & MII_INTEL_PHY_STAT_FDX) {
503 *speed = IF_PORT_100BASEFX;
504 dev->if_port = IF_PORT_100BASEFX;
505 }
506 else {
507 *speed = IF_PORT_100BASETX;
508 dev->if_port = IF_PORT_100BASETX;
509 }
510 }
511 else {
512 *speed = IF_PORT_10BASET;
513 dev->if_port = IF_PORT_10BASET;
514 }
515
516 }
517 else {
518 *link = 0;
519 *speed = 0;
520 dev->if_port = IF_PORT_UNKNOWN;
521 }
522 return 0;
523 }
524
525 int ks8995m_init(struct net_device *dev, int phy_addr)
526 {
527 s16 data;
528
529 // printk("ks8995m_init\n");
530 /* Stop auto-negotiation */
531 data = mdio_read(dev, phy_addr, MII_CONTROL);
532 mdio_write(dev, phy_addr, MII_CONTROL, data & ~MII_CNTL_AUTO);
533
534 /* Set advertisement to 10/100 and Half/Full duplex
535 * (full capabilities) */
536 data = mdio_read(dev, phy_addr, MII_ANADV);
537 data |= MII_NWAY_TX | MII_NWAY_TX_FDX | MII_NWAY_T_FDX | MII_NWAY_T;
538 mdio_write(dev, phy_addr, MII_ANADV, data);
539
540 /* Restart auto-negotiation */
541 data = mdio_read(dev, phy_addr, MII_CONTROL);
542 data |= MII_CNTL_RST_AUTO | MII_CNTL_AUTO;
543 mdio_write(dev, phy_addr, MII_CONTROL, data);
544
545 if (au1000_debug > 4) dump_mii(dev, phy_addr);
546
547 return 0;
548 }
549
550 int ks8995m_reset(struct net_device *dev, int phy_addr)
551 {
552 s16 mii_control, timeout;
553
554 // printk("ks8995m_reset\n");
555 mii_control = mdio_read(dev, phy_addr, MII_CONTROL);
556 mdio_write(dev, phy_addr, MII_CONTROL, mii_control | MII_CNTL_RESET);
557 mdelay(1);
558 for (timeout = 100; timeout > 0; --timeout) {
559 mii_control = mdio_read(dev, phy_addr, MII_CONTROL);
560 if ((mii_control & MII_CNTL_RESET) == 0)
561 break;
562 mdelay(1);
563 }
564 if (mii_control & MII_CNTL_RESET) {
565 printk(KERN_ERR "%s PHY reset timeout !\n", dev->name);
566 return -1;
567 }
568 return 0;
569 }
570
571 int ks8995m_status(struct net_device *dev, int phy_addr, u16 *link, u16 *speed)
572 {
573 u16 mii_data;
574 struct au1000_private *aup;
575
576 if (!dev) {
577 printk(KERN_ERR "ks8995m_status error: NULL dev\n");
578 return -1;
579 }
580 aup = (struct au1000_private *) dev->priv;
581
582 mii_data = mdio_read(dev, aup->phy_addr, MII_STATUS);
583 if (mii_data & MII_STAT_LINK) {
584 *link = 1;
585 mii_data = mdio_read(dev, aup->phy_addr, MII_AUX_CNTRL);
586 if (mii_data & MII_AUX_100) {
587 if (mii_data & MII_AUX_FDX) {
588 *speed = IF_PORT_100BASEFX;
589 dev->if_port = IF_PORT_100BASEFX;
590 }
591 else {
592 *speed = IF_PORT_100BASETX;
593 dev->if_port = IF_PORT_100BASETX;
594 }
595 }
596 else {
597 *speed = IF_PORT_10BASET;
598 dev->if_port = IF_PORT_10BASET;
599 }
600
601 }
602 else {
603 *link = 0;
604 *speed = 0;
605 dev->if_port = IF_PORT_UNKNOWN;
606 }
607 return 0;
608 }
609
610 int
611 smsc_83C185_init (struct net_device *dev, int phy_addr)
612 {
613 s16 data;
614
615 if (au1000_debug > 4)
616 printk("smsc_83C185_init\n");
617
618 /* Stop auto-negotiation */
619 data = mdio_read(dev, phy_addr, MII_CONTROL);
620 mdio_write(dev, phy_addr, MII_CONTROL, data & ~MII_CNTL_AUTO);
621
622 /* Set advertisement to 10/100 and Half/Full duplex
623 * (full capabilities) */
624 data = mdio_read(dev, phy_addr, MII_ANADV);
625 data |= MII_NWAY_TX | MII_NWAY_TX_FDX | MII_NWAY_T_FDX | MII_NWAY_T;
626 mdio_write(dev, phy_addr, MII_ANADV, data);
627
628 /* Restart auto-negotiation */
629 data = mdio_read(dev, phy_addr, MII_CONTROL);
630 data |= MII_CNTL_RST_AUTO | MII_CNTL_AUTO;
631
632 mdio_write(dev, phy_addr, MII_CONTROL, data);
633
634 if (au1000_debug > 4) dump_mii(dev, phy_addr);
635 return 0;
636 }
637
638 int
639 smsc_83C185_reset (struct net_device *dev, int phy_addr)
640 {
641 s16 mii_control, timeout;
642
643 if (au1000_debug > 4)
644 printk("smsc_83C185_reset\n");
645
646 mii_control = mdio_read(dev, phy_addr, MII_CONTROL);
647 mdio_write(dev, phy_addr, MII_CONTROL, mii_control | MII_CNTL_RESET);
648 mdelay(1);
649 for (timeout = 100; timeout > 0; --timeout) {
650 mii_control = mdio_read(dev, phy_addr, MII_CONTROL);
651 if ((mii_control & MII_CNTL_RESET) == 0)
652 break;
653 mdelay(1);
654 }
655 if (mii_control & MII_CNTL_RESET) {
656 printk(KERN_ERR "%s PHY reset timeout !\n", dev->name);
657 return -1;
658 }
659 return 0;
660 }
661
662 int
663 smsc_83C185_status (struct net_device *dev, int phy_addr, u16 *link, u16 *speed)
664 {
665 u16 mii_data;
666 struct au1000_private *aup;
667
668 if (!dev) {
669 printk(KERN_ERR "smsc_83C185_status error: NULL dev\n");
670 return -1;
671 }
672
673 aup = (struct au1000_private *) dev->priv;
674 mii_data = mdio_read(dev, aup->phy_addr, MII_STATUS);
675
676 if (mii_data & MII_STAT_LINK) {
677 *link = 1;
678 mii_data = mdio_read(dev, aup->phy_addr, 0x1f);
679 if (mii_data & (1<<3)) {
680 if (mii_data & (1<<4)) {
681 *speed = IF_PORT_100BASEFX;
682 dev->if_port = IF_PORT_100BASEFX;
683 }
684 else {
685 *speed = IF_PORT_100BASETX;
686 dev->if_port = IF_PORT_100BASETX;
687 }
688 }
689 else {
690 *speed = IF_PORT_10BASET;
691 dev->if_port = IF_PORT_10BASET;
692 }
693 }
694 else {
695 *link = 0;
696 *speed = 0;
697 dev->if_port = IF_PORT_UNKNOWN;
698 }
699 return 0;
700 }
701
702
703 #ifdef CONFIG_MIPS_BOSPORUS
704 int stub_init(struct net_device *dev, int phy_addr)
705 {
706 //printk("PHY stub_init\n");
707 return 0;
708 }
709
710 int stub_reset(struct net_device *dev, int phy_addr)
711 {
712 //printk("PHY stub_reset\n");
713 return 0;
714 }
715
716 int
717 stub_status(struct net_device *dev, int phy_addr, u16 *link, u16 *speed)
718 {
719 //printk("PHY stub_status\n");
720 *link = 1;
721 /* hmmm, revisit */
722 *speed = IF_PORT_100BASEFX;
723 dev->if_port = IF_PORT_100BASEFX;
724 return 0;
725 }
726 #endif
727
728 struct phy_ops bcm_5201_ops = {
729 bcm_5201_init,
730 bcm_5201_reset,
731 bcm_5201_status,
732 };
733
734 struct phy_ops am79c874_ops = {
735 am79c874_init,
736 am79c874_reset,
737 am79c874_status,
738 };
739
740 struct phy_ops am79c901_ops = {
741 am79c901_init,
742 am79c901_reset,
743 am79c901_status,
744 };
745
746 struct phy_ops lsi_80227_ops = {
747 lsi_80227_init,
748 lsi_80227_reset,
749 lsi_80227_status,
750 };
751
752 struct phy_ops lxt971a_ops = {
753 lxt971a_init,
754 lxt971a_reset,
755 lxt971a_status,
756 };
757
758 struct phy_ops ks8995m_ops = {
759 ks8995m_init,
760 ks8995m_reset,
761 ks8995m_status,
762 };
763
764 struct phy_ops smsc_83C185_ops = {
765 smsc_83C185_init,
766 smsc_83C185_reset,
767 smsc_83C185_status,
768 };
769
770 #ifdef CONFIG_MIPS_BOSPORUS
771 struct phy_ops stub_ops = {
772 stub_init,
773 stub_reset,
774 stub_status,
775 };
776 #endif
777
778 static struct mii_chip_info {
779 const char * name;
780 u16 phy_id0;
781 u16 phy_id1;
782 struct phy_ops *phy_ops;
783 int dual_phy;
784 } mii_chip_table[] = {
785 {"Broadcom BCM5201 10/100 BaseT PHY",0x0040,0x6212, &bcm_5201_ops,0},
786 {"Broadcom BCM5221 10/100 BaseT PHY",0x0040,0x61e4, &bcm_5201_ops,0},
787 {"Broadcom BCM5222 10/100 BaseT PHY",0x0040,0x6322, &bcm_5201_ops,1},
788 {"AMD 79C901 HomePNA PHY",0x0000,0x35c8, &am79c901_ops,0},
789 {"AMD 79C874 10/100 BaseT PHY",0x0022,0x561b, &am79c874_ops,0},
790 {"LSI 80227 10/100 BaseT PHY",0x0016,0xf840, &lsi_80227_ops,0},
791 {"Intel LXT971A Dual Speed PHY",0x0013,0x78e2, &lxt971a_ops,0},
792 {"Kendin KS8995M 10/100 BaseT PHY",0x0022,0x1450, &ks8995m_ops,0},
793 {"SMSC LAN83C185 10/100 BaseT PHY",0x0007,0xc0a3, &smsc_83C185_ops,0},
794 #ifdef CONFIG_MIPS_BOSPORUS
795 {"Stub", 0x1234, 0x5678, &stub_ops },
796 #endif
797 {0,},
798 };
799
800 static int mdio_read(struct net_device *dev, int phy_id, int reg)
801 {
802 struct au1000_private *aup = (struct au1000_private *) dev->priv;
803 volatile u32 *mii_control_reg;
804 volatile u32 *mii_data_reg;
805 u32 timedout = 20;
806 u32 mii_control;
807
808 #ifdef CONFIG_BCM5222_DUAL_PHY
809 /* First time we probe, it's for the mac0 phy.
810 * Since we haven't determined yet that we have a dual phy,
811 * aup->mii->mii_control_reg won't be setup and we'll
812 * default to the else statement.
813 * By the time we probe for the mac1 phy, the mii_control_reg
814 * will be setup to be the address of the mac0 phy control since
815 * both phys are controlled through mac0.
816 */
817 if (aup->mii && aup->mii->mii_control_reg) {
818 mii_control_reg = aup->mii->mii_control_reg;
819 mii_data_reg = aup->mii->mii_data_reg;
820 }
821 else if (au_macs[0]->mii && au_macs[0]->mii->mii_control_reg) {
822 /* assume both phys are controlled through mac0 */
823 mii_control_reg = au_macs[0]->mii->mii_control_reg;
824 mii_data_reg = au_macs[0]->mii->mii_data_reg;
825 }
826 else
827 #endif
828 {
829 /* default control and data reg addresses */
830 mii_control_reg = &aup->mac->mii_control;
831 mii_data_reg = &aup->mac->mii_data;
832 }
833
834 while (*mii_control_reg & MAC_MII_BUSY) {
835 mdelay(1);
836 if (--timedout == 0) {
837 printk(KERN_ERR "%s: read_MII busy timeout!!\n",
838 dev->name);
839 return -1;
840 }
841 }
842
843 mii_control = MAC_SET_MII_SELECT_REG(reg) |
844 MAC_SET_MII_SELECT_PHY(phy_id) | MAC_MII_READ;
845
846 *mii_control_reg = mii_control;
847
848 timedout = 20;
849 while (*mii_control_reg & MAC_MII_BUSY) {
850 mdelay(1);
851 if (--timedout == 0) {
852 printk(KERN_ERR "%s: mdio_read busy timeout!!\n",
853 dev->name);
854 return -1;
855 }
856 }
857 return (int)*mii_data_reg;
858 }
859
860 static void mdio_write(struct net_device *dev, int phy_id, int reg, u16 value)
861 {
862 struct au1000_private *aup = (struct au1000_private *) dev->priv;
863 volatile u32 *mii_control_reg;
864 volatile u32 *mii_data_reg;
865 u32 timedout = 20;
866 u32 mii_control;
867
868 #ifdef CONFIG_BCM5222_DUAL_PHY
869 if (aup->mii && aup->mii->mii_control_reg) {
870 mii_control_reg = aup->mii->mii_control_reg;
871 mii_data_reg = aup->mii->mii_data_reg;
872 }
873 else if (au_macs[0]->mii && au_macs[0]->mii->mii_control_reg) {
874 /* assume both phys are controlled through mac0 */
875 mii_control_reg = au_macs[0]->mii->mii_control_reg;
876 mii_data_reg = au_macs[0]->mii->mii_data_reg;
877 }
878 else
879 #endif
880 {
881 /* default control and data reg addresses */
882 mii_control_reg = &aup->mac->mii_control;
883 mii_data_reg = &aup->mac->mii_data;
884 }
885
886 while (*mii_control_reg & MAC_MII_BUSY) {
887 mdelay(1);
888 if (--timedout == 0) {
889 printk(KERN_ERR "%s: mdio_write busy timeout!!\n",
890 dev->name);
891 return;
892 }
893 }
894
895 mii_control = MAC_SET_MII_SELECT_REG(reg) |
896 MAC_SET_MII_SELECT_PHY(phy_id) | MAC_MII_WRITE;
897
898 *mii_data_reg = value;
899 *mii_control_reg = mii_control;
900 }
901
902
903 static void dump_mii(struct net_device *dev, int phy_id)
904 {
905 int i, val;
906
907 for (i = 0; i < 7; i++) {
908 if ((val = mdio_read(dev, phy_id, i)) >= 0)
909 printk("%s: MII Reg %d=%x\n", dev->name, i, val);
910 }
911 for (i = 16; i < 25; i++) {
912 if ((val = mdio_read(dev, phy_id, i)) >= 0)
913 printk("%s: MII Reg %d=%x\n", dev->name, i, val);
914 }
915 }
916
917 static int mii_probe (struct net_device * dev)
918 {
919 struct au1000_private *aup = (struct au1000_private *) dev->priv;
920 int phy_addr;
921 #ifdef CONFIG_MIPS_BOSPORUS
922 int phy_found=0;
923 #endif
924
925 /* search for total of 32 possible mii phy addresses */
926 for (phy_addr = 0; phy_addr < 32; phy_addr++) {
927 u16 mii_status;
928 u16 phy_id0, phy_id1;
929 int i;
930
931 #ifdef CONFIG_BCM5222_DUAL_PHY
932 /* Mask the already found phy, try next one */
933 if (au_macs[0]->mii && au_macs[0]->mii->mii_control_reg) {
934 if (au_macs[0]->phy_addr == phy_addr)
935 continue;
936 }
937 #endif
938
939 mii_status = mdio_read(dev, phy_addr, MII_STATUS);
940 if (mii_status == 0xffff || mii_status == 0x0000)
941 /* the mii is not accessable, try next one */
942 continue;
943
944 phy_id0 = mdio_read(dev, phy_addr, MII_PHY_ID0);
945 phy_id1 = mdio_read(dev, phy_addr, MII_PHY_ID1);
946
947 /* search our mii table for the current mii */
948 for (i = 0; mii_chip_table[i].phy_id1; i++) {
949 if (phy_id0 == mii_chip_table[i].phy_id0 &&
950 phy_id1 == mii_chip_table[i].phy_id1) {
951 struct mii_phy * mii_phy = aup->mii;
952
953 printk(KERN_INFO "%s: %s at phy address %d\n",
954 dev->name, mii_chip_table[i].name,
955 phy_addr);
956 #ifdef CONFIG_MIPS_BOSPORUS
957 phy_found = 1;
958 #endif
959 mii_phy->chip_info = mii_chip_table+i;
960 aup->phy_addr = phy_addr;
961 aup->want_autoneg = 1;
962 aup->phy_ops = mii_chip_table[i].phy_ops;
963 aup->phy_ops->phy_init(dev,phy_addr);
964
965 // Check for dual-phy and then store required
966 // values and set indicators. We need to do
967 // this now since mdio_{read,write} need the
968 // control and data register addresses.
969 #ifdef CONFIG_BCM5222_DUAL_PHY
970 if ( mii_chip_table[i].dual_phy) {
971
972 /* assume both phys are controlled
973 * through MAC0. Board specific? */
974
975 /* sanity check */
976 if (!au_macs[0] || !au_macs[0]->mii)
977 return -1;
978 aup->mii->mii_control_reg = (u32 *)
979 &au_macs[0]->mac->mii_control;
980 aup->mii->mii_data_reg = (u32 *)
981 &au_macs[0]->mac->mii_data;
982 }
983 #endif
984 goto found;
985 }
986 }
987 }
988 found:
989
990 #ifdef CONFIG_MIPS_BOSPORUS
991 /* This is a workaround for the Micrel/Kendin 5 port switch
992 The second MAC doesn't see a PHY connected... so we need to
993 trick it into thinking we have one.
994
995 If this kernel is run on another Au1500 development board
996 the stub will be found as well as the actual PHY. However,
997 the last found PHY will be used... usually at Addr 31 (Db1500).
998 */
999 if ( (!phy_found) )
1000 {
1001 u16 phy_id0, phy_id1;
1002 int i;
1003
1004 phy_id0 = 0x1234;
1005 phy_id1 = 0x5678;
1006
1007 /* search our mii table for the current mii */
1008 for (i = 0; mii_chip_table[i].phy_id1; i++) {
1009 if (phy_id0 == mii_chip_table[i].phy_id0 &&
1010 phy_id1 == mii_chip_table[i].phy_id1) {
1011 struct mii_phy * mii_phy;
1012
1013 printk(KERN_INFO "%s: %s at phy address %d\n",
1014 dev->name, mii_chip_table[i].name,
1015 phy_addr);
1016 mii_phy = kmalloc(sizeof(struct mii_phy),
1017 GFP_KERNEL);
1018 if (mii_phy) {
1019 mii_phy->chip_info = mii_chip_table+i;
1020 aup->phy_addr = phy_addr;
1021 mii_phy->next = aup->mii;
1022 aup->phy_ops =
1023 mii_chip_table[i].phy_ops;
1024 aup->mii = mii_phy;
1025 aup->phy_ops->phy_init(dev,phy_addr);
1026 } else {
1027 printk(KERN_ERR "%s: out of memory\n",
1028 dev->name);
1029 return -1;
1030 }
1031 mii_phy->chip_info = mii_chip_table+i;
1032 aup->phy_addr = phy_addr;
1033 aup->phy_ops = mii_chip_table[i].phy_ops;
1034 aup->phy_ops->phy_init(dev,phy_addr);
1035 break;
1036 }
1037 }
1038 }
1039 if (aup->mac_id == 0) {
1040 /* the Bosporus phy responds to addresses 0-5 but
1041 * 5 is the correct one.
1042 */
1043 aup->phy_addr = 5;
1044 }
1045 #endif
1046
1047 if (aup->mii->chip_info == NULL) {
1048 printk(KERN_ERR "%s: Au1x No MII transceivers found!\n",
1049 dev->name);
1050 return -1;
1051 }
1052
1053 printk(KERN_INFO "%s: Using %s as default\n",
1054 dev->name, aup->mii->chip_info->name);
1055
1056 return 0;
1057 }
1058
1059
1060 /*
1061 * Buffer allocation/deallocation routines. The buffer descriptor returned
1062 * has the virtual and dma address of a buffer suitable for
1063 * both, receive and transmit operations.
1064 */
1065 static db_dest_t *GetFreeDB(struct au1000_private *aup)
1066 {
1067 db_dest_t *pDB;
1068 pDB = aup->pDBfree;
1069
1070 if (pDB) {
1071 aup->pDBfree = pDB->pnext;
1072 }
1073 return pDB;
1074 }
1075
1076 void ReleaseDB(struct au1000_private *aup, db_dest_t *pDB)
1077 {
1078 db_dest_t *pDBfree = aup->pDBfree;
1079 if (pDBfree)
1080 pDBfree->pnext = pDB;
1081 aup->pDBfree = pDB;
1082 }
1083
1084 static void enable_rx_tx(struct net_device *dev)
1085 {
1086 struct au1000_private *aup = (struct au1000_private *) dev->priv;
1087
1088 if (au1000_debug > 4)
1089 printk(KERN_INFO "%s: enable_rx_tx\n", dev->name);
1090
1091 aup->mac->control |= (MAC_RX_ENABLE | MAC_TX_ENABLE);
1092 au_sync_delay(10);
1093 }
1094
1095 static void hard_stop(struct net_device *dev)
1096 {
1097 struct au1000_private *aup = (struct au1000_private *) dev->priv;
1098
1099 if (au1000_debug > 4)
1100 printk(KERN_INFO "%s: hard stop\n", dev->name);
1101
1102 aup->mac->control &= ~(MAC_RX_ENABLE | MAC_TX_ENABLE);
1103 au_sync_delay(10);
1104 }
1105
1106
1107 static void reset_mac(struct net_device *dev)
1108 {
1109 int i;
1110 u32 flags;
1111 struct au1000_private *aup = (struct au1000_private *) dev->priv;
1112
1113 if (au1000_debug > 4)
1114 printk(KERN_INFO "%s: reset mac, aup %x\n",
1115 dev->name, (unsigned)aup);
1116
1117 spin_lock_irqsave(&aup->lock, flags);
1118 if (aup->timer.function == &au1000_timer) {/* check if timer initted */
1119 del_timer(&aup->timer);
1120 }
1121
1122 hard_stop(dev);
1123 #ifdef CONFIG_BCM5222_DUAL_PHY
1124 if (aup->mac_id != 0) {
1125 #endif
1126 /* If BCM5222, we can't leave MAC0 in reset because then
1127 * we can't access the dual phy for ETH1 */
1128 *aup->enable = MAC_EN_CLOCK_ENABLE;
1129 au_sync_delay(2);
1130 *aup->enable = 0;
1131 au_sync_delay(2);
1132 #ifdef CONFIG_BCM5222_DUAL_PHY
1133 }
1134 #endif
1135 aup->tx_full = 0;
1136 for (i = 0; i < NUM_RX_DMA; i++) {
1137 /* reset control bits */
1138 aup->rx_dma_ring[i]->buff_stat &= ~0xf;
1139 }
1140 for (i = 0; i < NUM_TX_DMA; i++) {
1141 /* reset control bits */
1142 aup->tx_dma_ring[i]->buff_stat &= ~0xf;
1143 }
1144 spin_unlock_irqrestore(&aup->lock, flags);
1145 }
1146
1147
1148 /*
1149 * Setup the receive and transmit "rings". These pointers are the addresses
1150 * of the rx and tx MAC DMA registers so they are fixed by the hardware --
1151 * these are not descriptors sitting in memory.
1152 */
1153 static void
1154 setup_hw_rings(struct au1000_private *aup, u32 rx_base, u32 tx_base)
1155 {
1156 int i;
1157
1158 for (i = 0; i < NUM_RX_DMA; i++) {
1159 aup->rx_dma_ring[i] =
1160 (volatile rx_dma_t *) (rx_base + sizeof(rx_dma_t)*i);
1161 }
1162 for (i = 0; i < NUM_TX_DMA; i++) {
1163 aup->tx_dma_ring[i] =
1164 (volatile tx_dma_t *) (tx_base + sizeof(tx_dma_t)*i);
1165 }
1166 }
1167
1168 static struct {
1169 int port;
1170 u32 base_addr;
1171 u32 macen_addr;
1172 int irq;
1173 struct net_device *dev;
1174 } iflist[2];
1175
1176 static int num_ifs;
1177
1178 /*
1179 * Setup the base address and interupt of the Au1xxx ethernet macs
1180 * based on cpu type and whether the interface is enabled in sys_pinfunc
1181 * register. The last interface is enabled if SYS_PF_NI2 (bit 4) is 0.
1182 */
1183 static int __init au1000_init_module(void)
1184 {
1185 struct cpuinfo_mips *c = &current_cpu_data;
1186 int ni = (int)((au_readl(SYS_PINFUNC) & (u32)(SYS_PF_NI2)) >> 4);
1187 struct net_device *dev;
1188 int i, found_one = 0;
1189
1190 switch (c->cputype) {
1191 #ifdef CONFIG_SOC_AU1000
1192 case CPU_AU1000:
1193 num_ifs = 2 - ni;
1194 iflist[0].base_addr = AU1000_ETH0_BASE;
1195 iflist[1].base_addr = AU1000_ETH1_BASE;
1196 iflist[0].macen_addr = AU1000_MAC0_ENABLE;
1197 iflist[1].macen_addr = AU1000_MAC1_ENABLE;
1198 iflist[0].irq = AU1000_MAC0_DMA_INT;
1199 iflist[1].irq = AU1000_MAC1_DMA_INT;
1200 break;
1201 #endif
1202 #ifdef CONFIG_SOC_AU1100
1203 case CPU_AU1100:
1204 num_ifs = 1 - ni;
1205 iflist[0].base_addr = AU1100_ETH0_BASE;
1206 iflist[0].macen_addr = AU1100_MAC0_ENABLE;
1207 iflist[0].irq = AU1100_MAC0_DMA_INT;
1208 break;
1209 #endif
1210 #ifdef CONFIG_SOC_AU1500
1211 case CPU_AU1500:
1212 num_ifs = 2 - ni;
1213 iflist[0].base_addr = AU1500_ETH0_BASE;
1214 iflist[1].base_addr = AU1500_ETH1_BASE;
1215 iflist[0].macen_addr = AU1500_MAC0_ENABLE;
1216 iflist[1].macen_addr = AU1500_MAC1_ENABLE;
1217 iflist[0].irq = AU1500_MAC0_DMA_INT;
1218 iflist[1].irq = AU1500_MAC1_DMA_INT;
1219 break;
1220 #endif
1221 #ifdef CONFIG_SOC_AU1550
1222 case CPU_AU1550:
1223 num_ifs = 2 - ni;
1224 iflist[0].base_addr = AU1550_ETH0_BASE;
1225 iflist[1].base_addr = AU1550_ETH1_BASE;
1226 iflist[0].macen_addr = AU1550_MAC0_ENABLE;
1227 iflist[1].macen_addr = AU1550_MAC1_ENABLE;
1228 iflist[0].irq = AU1550_MAC0_DMA_INT;
1229 iflist[1].irq = AU1550_MAC1_DMA_INT;
1230 break;
1231 #endif
1232 default:
1233 num_ifs = 0;
1234 }
1235 for(i = 0; i < num_ifs; i++) {
1236 dev = au1000_probe(iflist[i].base_addr, iflist[i].irq, i);
1237 iflist[i].dev = dev;
1238 if (dev)
1239 found_one++;
1240 }
1241 if (!found_one)
1242 return -ENODEV;
1243 return 0;
1244 }
1245
1246 static int au1000_setup_aneg(struct net_device *dev, u32 advertise)
1247 {
1248 struct au1000_private *aup = (struct au1000_private *)dev->priv;
1249 u16 ctl, adv;
1250
1251 /* Setup standard advertise */
1252 adv = mdio_read(dev, aup->phy_addr, MII_ADVERTISE);
1253 adv &= ~(ADVERTISE_ALL | ADVERTISE_100BASE4);
1254 if (advertise & ADVERTISED_10baseT_Half)
1255 adv |= ADVERTISE_10HALF;
1256 if (advertise & ADVERTISED_10baseT_Full)
1257 adv |= ADVERTISE_10FULL;
1258 if (advertise & ADVERTISED_100baseT_Half)
1259 adv |= ADVERTISE_100HALF;
1260 if (advertise & ADVERTISED_100baseT_Full)
1261 adv |= ADVERTISE_100FULL;
1262 mdio_write(dev, aup->phy_addr, MII_ADVERTISE, adv);
1263
1264 /* Start/Restart aneg */
1265 ctl = mdio_read(dev, aup->phy_addr, MII_BMCR);
1266 ctl |= (BMCR_ANENABLE | BMCR_ANRESTART);
1267 mdio_write(dev, aup->phy_addr, MII_BMCR, ctl);
1268
1269 return 0;
1270 }
1271
1272 static int au1000_setup_forced(struct net_device *dev, int speed, int fd)
1273 {
1274 struct au1000_private *aup = (struct au1000_private *)dev->priv;
1275 u16 ctl;
1276
1277 ctl = mdio_read(dev, aup->phy_addr, MII_BMCR);
1278 ctl &= ~(BMCR_FULLDPLX | BMCR_SPEED100 | BMCR_ANENABLE);
1279
1280 /* First reset the PHY */
1281 mdio_write(dev, aup->phy_addr, MII_BMCR, ctl | BMCR_RESET);
1282
1283 /* Select speed & duplex */
1284 switch (speed) {
1285 case SPEED_10:
1286 break;
1287 case SPEED_100:
1288 ctl |= BMCR_SPEED100;
1289 break;
1290 case SPEED_1000:
1291 default:
1292 return -EINVAL;
1293 }
1294 if (fd == DUPLEX_FULL)
1295 ctl |= BMCR_FULLDPLX;
1296 mdio_write(dev, aup->phy_addr, MII_BMCR, ctl);
1297
1298 return 0;
1299 }
1300
1301
1302 static void
1303 au1000_start_link(struct net_device *dev, struct ethtool_cmd *cmd)
1304 {
1305 struct au1000_private *aup = (struct au1000_private *)dev->priv;
1306 u32 advertise;
1307 int autoneg;
1308 int forced_speed;
1309 int forced_duplex;
1310
1311 /* Default advertise */
1312 advertise = GENMII_DEFAULT_ADVERTISE;
1313 autoneg = aup->want_autoneg;
1314 forced_speed = SPEED_100;
1315 forced_duplex = DUPLEX_FULL;
1316
1317 /* Setup link parameters */
1318 if (cmd) {
1319 if (cmd->autoneg == AUTONEG_ENABLE) {
1320 advertise = cmd->advertising;
1321 autoneg = 1;
1322 } else {
1323 autoneg = 0;
1324
1325 forced_speed = cmd->speed;
1326 forced_duplex = cmd->duplex;
1327 }
1328 }
1329
1330 /* Configure PHY & start aneg */
1331 aup->want_autoneg = autoneg;
1332 if (autoneg)
1333 au1000_setup_aneg(dev, advertise);
1334 else
1335 au1000_setup_forced(dev, forced_speed, forced_duplex);
1336 mod_timer(&aup->timer, jiffies + HZ);
1337 }
1338
1339 static int au1000_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
1340 {
1341 struct au1000_private *aup = (struct au1000_private *)dev->priv;
1342 u16 link, speed;
1343
1344 cmd->supported = GENMII_DEFAULT_FEATURES;
1345 cmd->advertising = GENMII_DEFAULT_ADVERTISE;
1346 cmd->port = PORT_MII;
1347 cmd->transceiver = XCVR_EXTERNAL;
1348 cmd->phy_address = aup->phy_addr;
1349 spin_lock_irq(&aup->lock);
1350 cmd->autoneg = aup->want_autoneg;
1351 aup->phy_ops->phy_status(dev, aup->phy_addr, &link, &speed);
1352 if ((speed == IF_PORT_100BASETX) || (speed == IF_PORT_100BASEFX))
1353 cmd->speed = SPEED_100;
1354 else if (speed == IF_PORT_10BASET)
1355 cmd->speed = SPEED_10;
1356 if (link && (dev->if_port == IF_PORT_100BASEFX))
1357 cmd->duplex = DUPLEX_FULL;
1358 else
1359 cmd->duplex = DUPLEX_HALF;
1360 spin_unlock_irq(&aup->lock);
1361 return 0;
1362 }
1363
1364 static int au1000_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
1365 {
1366 struct au1000_private *aup = (struct au1000_private *)dev->priv;
1367 unsigned long features = GENMII_DEFAULT_FEATURES;
1368
1369 if (!capable(CAP_NET_ADMIN))
1370 return -EPERM;
1371
1372 if (cmd->autoneg != AUTONEG_ENABLE && cmd->autoneg != AUTONEG_DISABLE)
1373 return -EINVAL;
1374 if (cmd->autoneg == AUTONEG_ENABLE && cmd->advertising == 0)
1375 return -EINVAL;
1376 if (cmd->duplex != DUPLEX_HALF && cmd->duplex != DUPLEX_FULL)
1377 return -EINVAL;
1378 if (cmd->autoneg == AUTONEG_DISABLE)
1379 switch (cmd->speed) {
1380 case SPEED_10:
1381 if (cmd->duplex == DUPLEX_HALF &&
1382 (features & SUPPORTED_10baseT_Half) == 0)
1383 return -EINVAL;
1384 if (cmd->duplex == DUPLEX_FULL &&
1385 (features & SUPPORTED_10baseT_Full) == 0)
1386 return -EINVAL;
1387 break;
1388 case SPEED_100:
1389 if (cmd->duplex == DUPLEX_HALF &&
1390 (features & SUPPORTED_100baseT_Half) == 0)
1391 return -EINVAL;
1392 if (cmd->duplex == DUPLEX_FULL &&
1393 (features & SUPPORTED_100baseT_Full) == 0)
1394 return -EINVAL;
1395 break;
1396 default:
1397 return -EINVAL;
1398 }
1399 else if ((features & SUPPORTED_Autoneg) == 0)
1400 return -EINVAL;
1401
1402 spin_lock_irq(&aup->lock);
1403 au1000_start_link(dev, cmd);
1404 spin_unlock_irq(&aup->lock);
1405 return 0;
1406 }
1407
1408 static int au1000_nway_reset(struct net_device *dev)
1409 {
1410 struct au1000_private *aup = (struct au1000_private *)dev->priv;
1411
1412 if (!aup->want_autoneg)
1413 return -EINVAL;
1414 spin_lock_irq(&aup->lock);
1415 au1000_start_link(dev, NULL);
1416 spin_unlock_irq(&aup->lock);
1417 return 0;
1418 }
1419
1420 static void
1421 au1000_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info)
1422 {
1423 struct au1000_private *aup = (struct au1000_private *)dev->priv;
1424
1425 strcpy(info->driver, DRV_NAME);
1426 strcpy(info->version, DRV_VERSION);
1427 info->fw_version[0] = '\0';
1428 sprintf(info->bus_info, "%s %d", DRV_NAME, aup->mac_id);
1429 info->regdump_len = 0;
1430 }
1431
1432 static u32 au1000_get_link(struct net_device *dev)
1433 {
1434 return netif_carrier_ok(dev);
1435 }
1436
1437 static struct ethtool_ops au1000_ethtool_ops = {
1438 .get_settings = au1000_get_settings,
1439 .set_settings = au1000_set_settings,
1440 .get_drvinfo = au1000_get_drvinfo,
1441 .nway_reset = au1000_nway_reset,
1442 .get_link = au1000_get_link
1443 };
1444
1445 static struct net_device *
1446 au1000_probe(u32 ioaddr, int irq, int port_num)
1447 {
1448 static unsigned version_printed = 0;
1449 struct au1000_private *aup = NULL;
1450 struct net_device *dev = NULL;
1451 db_dest_t *pDB, *pDBfree;
1452 char *pmac, *argptr;
1453 char ethaddr[6];
1454 int i, err;
1455
1456 if (!request_mem_region(CPHYSADDR(ioaddr), MAC_IOSIZE, "Au1x00 ENET"))
1457 return NULL;
1458
1459 if (version_printed++ == 0)
1460 printk("%s version %s %s\n", DRV_NAME, DRV_VERSION, DRV_AUTHOR);
1461
1462 dev = alloc_etherdev(sizeof(struct au1000_private));
1463 if (!dev) {
1464 printk (KERN_ERR "au1000 eth: alloc_etherdev failed\n");
1465 return NULL;
1466 }
1467
1468 if ((err = register_netdev(dev))) {
1469 printk(KERN_ERR "Au1x_eth Cannot register net device err %d\n",
1470 err);
1471 free_netdev(dev);
1472 return NULL;
1473 }
1474
1475 printk("%s: Au1x Ethernet found at 0x%x, irq %d\n",
1476 dev->name, ioaddr, irq);
1477
1478 aup = dev->priv;
1479
1480 /* Allocate the data buffers */
1481 /* Snooping works fine with eth on all au1xxx */
1482 aup->vaddr = (u32)dma_alloc_noncoherent(NULL,
1483 MAX_BUF_SIZE * (NUM_TX_BUFFS+NUM_RX_BUFFS),
1484 &aup->dma_addr,
1485 0);
1486 if (!aup->vaddr) {
1487 free_netdev(dev);
1488 release_mem_region(CPHYSADDR(ioaddr), MAC_IOSIZE);
1489 return NULL;
1490 }
1491
1492 /* aup->mac is the base address of the MAC's registers */
1493 aup->mac = (volatile mac_reg_t *)((unsigned long)ioaddr);
1494 /* Setup some variables for quick register address access */
1495 if (ioaddr == iflist[0].base_addr)
1496 {
1497 /* check env variables first */
1498 if (!get_ethernet_addr(ethaddr)) {
1499 memcpy(au1000_mac_addr, ethaddr, sizeof(au1000_mac_addr));
1500 } else {
1501 /* Check command line */
1502 argptr = prom_getcmdline();
1503 if ((pmac = strstr(argptr, "ethaddr=")) == NULL) {
1504 printk(KERN_INFO "%s: No mac address found\n",
1505 dev->name);
1506 /* use the hard coded mac addresses */
1507 } else {
1508 str2eaddr(ethaddr, pmac + strlen("ethaddr="));
1509 memcpy(au1000_mac_addr, ethaddr,
1510 sizeof(au1000_mac_addr));
1511 }
1512 }
1513 aup->enable = (volatile u32 *)
1514 ((unsigned long)iflist[0].macen_addr);
1515 memcpy(dev->dev_addr, au1000_mac_addr, sizeof(au1000_mac_addr));
1516 setup_hw_rings(aup, MAC0_RX_DMA_ADDR, MAC0_TX_DMA_ADDR);
1517 aup->mac_id = 0;
1518 au_macs[0] = aup;
1519 }
1520 else
1521 if (ioaddr == iflist[1].base_addr)
1522 {
1523 aup->enable = (volatile u32 *)
1524 ((unsigned long)iflist[1].macen_addr);
1525 memcpy(dev->dev_addr, au1000_mac_addr, sizeof(au1000_mac_addr));
1526 dev->dev_addr[4] += 0x10;
1527 setup_hw_rings(aup, MAC1_RX_DMA_ADDR, MAC1_TX_DMA_ADDR);
1528 aup->mac_id = 1;
1529 au_macs[1] = aup;
1530 }
1531 else
1532 {
1533 printk(KERN_ERR "%s: bad ioaddr\n", dev->name);
1534 }
1535
1536 /* bring the device out of reset, otherwise probing the mii
1537 * will hang */
1538 *aup->enable = MAC_EN_CLOCK_ENABLE;
1539 au_sync_delay(2);
1540 *aup->enable = MAC_EN_RESET0 | MAC_EN_RESET1 |
1541 MAC_EN_RESET2 | MAC_EN_CLOCK_ENABLE;
1542 au_sync_delay(2);
1543
1544 aup->mii = kmalloc(sizeof(struct mii_phy), GFP_KERNEL);
1545 if (!aup->mii) {
1546 printk(KERN_ERR "%s: out of memory\n", dev->name);
1547 goto err_out;
1548 }
1549 aup->mii->mii_control_reg = 0;
1550 aup->mii->mii_data_reg = 0;
1551
1552 if (mii_probe(dev) != 0) {
1553 goto err_out;
1554 }
1555
1556 pDBfree = NULL;
1557 /* setup the data buffer descriptors and attach a buffer to each one */
1558 pDB = aup->db;
1559 for (i = 0; i < (NUM_TX_BUFFS+NUM_RX_BUFFS); i++) {
1560 pDB->pnext = pDBfree;
1561 pDBfree = pDB;
1562 pDB->vaddr = (u32 *)((unsigned)aup->vaddr + MAX_BUF_SIZE*i);
1563 pDB->dma_addr = (dma_addr_t)virt_to_bus(pDB->vaddr);
1564 pDB++;
1565 }
1566 aup->pDBfree = pDBfree;
1567
1568 for (i = 0; i < NUM_RX_DMA; i++) {
1569 pDB = GetFreeDB(aup);
1570 if (!pDB) {
1571 goto err_out;
1572 }
1573 aup->rx_dma_ring[i]->buff_stat = (unsigned)pDB->dma_addr;
1574 aup->rx_db_inuse[i] = pDB;
1575 }
1576 for (i = 0; i < NUM_TX_DMA; i++) {
1577 pDB = GetFreeDB(aup);
1578 if (!pDB) {
1579 goto err_out;
1580 }
1581 aup->tx_dma_ring[i]->buff_stat = (unsigned)pDB->dma_addr;
1582 aup->tx_dma_ring[i]->len = 0;
1583 aup->tx_db_inuse[i] = pDB;
1584 }
1585
1586 spin_lock_init(&aup->lock);
1587 dev->base_addr = ioaddr;
1588 dev->irq = irq;
1589 dev->open = au1000_open;
1590 dev->hard_start_xmit = au1000_tx;
1591 dev->stop = au1000_close;
1592 dev->get_stats = au1000_get_stats;
1593 dev->set_multicast_list = &set_rx_mode;
1594 dev->do_ioctl = &au1000_ioctl;
1595 SET_ETHTOOL_OPS(dev, &au1000_ethtool_ops);
1596 dev->set_config = &au1000_set_config;
1597 dev->tx_timeout = au1000_tx_timeout;
1598 dev->watchdog_timeo = ETH_TX_TIMEOUT;
1599
1600 /*
1601 * The boot code uses the ethernet controller, so reset it to start
1602 * fresh. au1000_init() expects that the device is in reset state.
1603 */
1604 reset_mac(dev);
1605
1606 return dev;
1607
1608 err_out:
1609 /* here we should have a valid dev plus aup-> register addresses
1610 * so we can reset the mac properly.*/
1611 reset_mac(dev);
1612 if (aup->mii)
1613 kfree(aup->mii);
1614 for (i = 0; i < NUM_RX_DMA; i++) {
1615 if (aup->rx_db_inuse[i])
1616 ReleaseDB(aup, aup->rx_db_inuse[i]);
1617 }
1618 for (i = 0; i < NUM_TX_DMA; i++) {
1619 if (aup->tx_db_inuse[i])
1620 ReleaseDB(aup, aup->tx_db_inuse[i]);
1621 }
1622 dma_free_noncoherent(NULL,
1623 MAX_BUF_SIZE * (NUM_TX_BUFFS+NUM_RX_BUFFS),
1624 (void *)aup->vaddr,
1625 aup->dma_addr);
1626 unregister_netdev(dev);
1627 free_netdev(dev);
1628 release_mem_region(CPHYSADDR(ioaddr), MAC_IOSIZE);
1629 return NULL;
1630 }
1631
1632 /*
1633 * Initialize the interface.
1634 *
1635 * When the device powers up, the clocks are disabled and the
1636 * mac is in reset state. When the interface is closed, we
1637 * do the same -- reset the device and disable the clocks to
1638 * conserve power. Thus, whenever au1000_init() is called,
1639 * the device should already be in reset state.
1640 */
1641 static int au1000_init(struct net_device *dev)
1642 {
1643 struct au1000_private *aup = (struct au1000_private *) dev->priv;
1644 u32 flags;
1645 int i;
1646 u32 control;
1647 u16 link, speed;
1648
1649 if (au1000_debug > 4)
1650 printk("%s: au1000_init\n", dev->name);
1651
1652 spin_lock_irqsave(&aup->lock, flags);
1653
1654 /* bring the device out of reset */
1655 *aup->enable = MAC_EN_CLOCK_ENABLE;
1656 au_sync_delay(2);
1657 *aup->enable = MAC_EN_RESET0 | MAC_EN_RESET1 |
1658 MAC_EN_RESET2 | MAC_EN_CLOCK_ENABLE;
1659 au_sync_delay(20);
1660
1661 aup->mac->control = 0;
1662 aup->tx_head = (aup->tx_dma_ring[0]->buff_stat & 0xC) >> 2;
1663 aup->tx_tail = aup->tx_head;
1664 aup->rx_head = (aup->rx_dma_ring[0]->buff_stat & 0xC) >> 2;
1665
1666 aup->mac->mac_addr_high = dev->dev_addr[5]<<8 | dev->dev_addr[4];
1667 aup->mac->mac_addr_low = dev->dev_addr[3]<<24 | dev->dev_addr[2]<<16 |
1668 dev->dev_addr[1]<<8 | dev->dev_addr[0];
1669
1670 for (i = 0; i < NUM_RX_DMA; i++) {
1671 aup->rx_dma_ring[i]->buff_stat |= RX_DMA_ENABLE;
1672 }
1673 au_sync();
1674
1675 aup->phy_ops->phy_status(dev, aup->phy_addr, &link, &speed);
1676 control = MAC_DISABLE_RX_OWN | MAC_RX_ENABLE | MAC_TX_ENABLE;
1677 #ifndef CONFIG_CPU_LITTLE_ENDIAN
1678 control |= MAC_BIG_ENDIAN;
1679 #endif
1680 if (link && (dev->if_port == IF_PORT_100BASEFX)) {
1681 control |= MAC_FULL_DUPLEX;
1682 }
1683
1684 /* fix for startup without cable */
1685 if (!link)
1686 dev->flags &= ~IFF_RUNNING;
1687
1688 aup->mac->control = control;
1689 aup->mac->vlan1_tag = 0x8100; /* activate vlan support */
1690 au_sync();
1691
1692 spin_unlock_irqrestore(&aup->lock, flags);
1693 return 0;
1694 }
1695
1696 static void au1000_timer(unsigned long data)
1697 {
1698 struct net_device *dev = (struct net_device *)data;
1699 struct au1000_private *aup = (struct au1000_private *) dev->priv;
1700 unsigned char if_port;
1701 u16 link, speed;
1702
1703 if (!dev) {
1704 /* fatal error, don't restart the timer */
1705 printk(KERN_ERR "au1000_timer error: NULL dev\n");
1706 return;
1707 }
1708
1709 if_port = dev->if_port;
1710 if (aup->phy_ops->phy_status(dev, aup->phy_addr, &link, &speed) == 0) {
1711 if (link) {
1712 if (!(dev->flags & IFF_RUNNING)) {
1713 netif_carrier_on(dev);
1714 dev->flags |= IFF_RUNNING;
1715 printk(KERN_INFO "%s: link up\n", dev->name);
1716 }
1717 }
1718 else {
1719 if (dev->flags & IFF_RUNNING) {
1720 netif_carrier_off(dev);
1721 dev->flags &= ~IFF_RUNNING;
1722 dev->if_port = 0;
1723 printk(KERN_INFO "%s: link down\n", dev->name);
1724 }
1725 }
1726 }
1727
1728 if (link && (dev->if_port != if_port) &&
1729 (dev->if_port != IF_PORT_UNKNOWN)) {
1730 hard_stop(dev);
1731 if (dev->if_port == IF_PORT_100BASEFX) {
1732 printk(KERN_INFO "%s: going to full duplex\n",
1733 dev->name);
1734 aup->mac->control |= MAC_FULL_DUPLEX;
1735 au_sync_delay(1);
1736 }
1737 else {
1738 aup->mac->control &= ~MAC_FULL_DUPLEX;
1739 au_sync_delay(1);
1740 }
1741 enable_rx_tx(dev);
1742 }
1743
1744 aup->timer.expires = RUN_AT((1*HZ));
1745 aup->timer.data = (unsigned long)dev;
1746 aup->timer.function = &au1000_timer; /* timer handler */
1747 add_timer(&aup->timer);
1748
1749 }
1750
1751 static int au1000_open(struct net_device *dev)
1752 {
1753 int retval;
1754 struct au1000_private *aup = (struct au1000_private *) dev->priv;
1755
1756 if (au1000_debug > 4)
1757 printk("%s: open: dev=%p\n", dev->name, dev);
1758
1759 if ((retval = au1000_init(dev))) {
1760 printk(KERN_ERR "%s: error in au1000_init\n", dev->name);
1761 free_irq(dev->irq, dev);
1762 return retval;
1763 }
1764 netif_start_queue(dev);
1765
1766 if ((retval = request_irq(dev->irq, &au1000_interrupt, 0,
1767 dev->name, dev))) {
1768 printk(KERN_ERR "%s: unable to get IRQ %d\n",
1769 dev->name, dev->irq);
1770 return retval;
1771 }
1772
1773 init_timer(&aup->timer); /* used in ioctl() */
1774 aup->timer.expires = RUN_AT((3*HZ));
1775 aup->timer.data = (unsigned long)dev;
1776 aup->timer.function = &au1000_timer; /* timer handler */
1777 add_timer(&aup->timer);
1778
1779 if (au1000_debug > 4)
1780 printk("%s: open: Initialization done.\n", dev->name);
1781
1782 return 0;
1783 }
1784
1785 static int au1000_close(struct net_device *dev)
1786 {
1787 u32 flags;
1788 struct au1000_private *aup = (struct au1000_private *) dev->priv;
1789
1790 if (au1000_debug > 4)
1791 printk("%s: close: dev=%p\n", dev->name, dev);
1792
1793 reset_mac(dev);
1794
1795 spin_lock_irqsave(&aup->lock, flags);
1796
1797 /* stop the device */
1798 netif_stop_queue(dev);
1799
1800 /* disable the interrupt */
1801 free_irq(dev->irq, dev);
1802 spin_unlock_irqrestore(&aup->lock, flags);
1803
1804 return 0;
1805 }
1806
1807 static void __exit au1000_cleanup_module(void)
1808 {
1809 int i, j;
1810 struct net_device *dev;
1811 struct au1000_private *aup;
1812
1813 for (i = 0; i < num_ifs; i++) {
1814 dev = iflist[i].dev;
1815 if (dev) {
1816 aup = (struct au1000_private *) dev->priv;
1817 unregister_netdev(dev);
1818 if (aup->mii)
1819 kfree(aup->mii);
1820 for (j = 0; j < NUM_RX_DMA; j++) {
1821 if (aup->rx_db_inuse[j])
1822 ReleaseDB(aup, aup->rx_db_inuse[j]);
1823 }
1824 for (j = 0; j < NUM_TX_DMA; j++) {
1825 if (aup->tx_db_inuse[j])
1826 ReleaseDB(aup, aup->tx_db_inuse[j]);
1827 }
1828 dma_free_noncoherent(NULL,
1829 MAX_BUF_SIZE * (NUM_TX_BUFFS+NUM_RX_BUFFS),
1830 (void *)aup->vaddr,
1831 aup->dma_addr);
1832 free_netdev(dev);
1833 release_mem_region(CPHYSADDR(iflist[i].base_addr), MAC_IOSIZE);
1834 }
1835 }
1836 }
1837
1838
1839 static inline void
1840 update_tx_stats(struct net_device *dev, u32 status, u32 pkt_len)
1841 {
1842 struct au1000_private *aup = (struct au1000_private *) dev->priv;
1843 struct net_device_stats *ps = &aup->stats;
1844
1845 ps->tx_packets++;
1846 ps->tx_bytes += pkt_len;
1847
1848 if (status & TX_FRAME_ABORTED) {
1849 if (dev->if_port == IF_PORT_100BASEFX) {
1850 if (status & (TX_JAB_TIMEOUT | TX_UNDERRUN)) {
1851 /* any other tx errors are only valid
1852 * in half duplex mode */
1853 ps->tx_errors++;
1854 ps->tx_aborted_errors++;
1855 }
1856 }
1857 else {
1858 ps->tx_errors++;
1859 ps->tx_aborted_errors++;
1860 if (status & (TX_NO_CARRIER | TX_LOSS_CARRIER))
1861 ps->tx_carrier_errors++;
1862 }
1863 }
1864 }
1865
1866
1867 /*
1868 * Called from the interrupt service routine to acknowledge
1869 * the TX DONE bits. This is a must if the irq is setup as
1870 * edge triggered.
1871 */
1872 static void au1000_tx_ack(struct net_device *dev)
1873 {
1874 struct au1000_private *aup = (struct au1000_private *) dev->priv;
1875 volatile tx_dma_t *ptxd;
1876
1877 ptxd = aup->tx_dma_ring[aup->tx_tail];
1878
1879 while (ptxd->buff_stat & TX_T_DONE) {
1880 update_tx_stats(dev, ptxd->status, ptxd->len & 0x3ff);
1881 ptxd->buff_stat &= ~TX_T_DONE;
1882 ptxd->len = 0;
1883 au_sync();
1884
1885 aup->tx_tail = (aup->tx_tail + 1) & (NUM_TX_DMA - 1);
1886 ptxd = aup->tx_dma_ring[aup->tx_tail];
1887
1888 if (aup->tx_full) {
1889 aup->tx_full = 0;
1890 netif_wake_queue(dev);
1891 }
1892 }
1893 }
1894
1895
1896 /*
1897 * Au1000 transmit routine.
1898 */
1899 static int au1000_tx(struct sk_buff *skb, struct net_device *dev)
1900 {
1901 struct au1000_private *aup = (struct au1000_private *) dev->priv;
1902 volatile tx_dma_t *ptxd;
1903 u32 buff_stat;
1904 db_dest_t *pDB;
1905 int i;
1906
1907 if (au1000_debug > 5)
1908 printk("%s: tx: aup %x len=%d, data=%p, head %d\n",
1909 dev->name, (unsigned)aup, skb->len,
1910 skb->data, aup->tx_head);
1911
1912 ptxd = aup->tx_dma_ring[aup->tx_head];
1913 buff_stat = ptxd->buff_stat;
1914 if (buff_stat & TX_DMA_ENABLE) {
1915 /* We've wrapped around and the transmitter is still busy */
1916 netif_stop_queue(dev);
1917 aup->tx_full = 1;
1918 return 1;
1919 }
1920 else if (buff_stat & TX_T_DONE) {
1921 update_tx_stats(dev, ptxd->status, ptxd->len & 0x3ff);
1922 ptxd->len = 0;
1923 }
1924
1925 if (aup->tx_full) {
1926 aup->tx_full = 0;
1927 netif_wake_queue(dev);
1928 }
1929
1930 pDB = aup->tx_db_inuse[aup->tx_head];
1931 memcpy((void *)pDB->vaddr, skb->data, skb->len);
1932 if (skb->len < ETH_ZLEN) {
1933 for (i=skb->len; i<ETH_ZLEN; i++) {
1934 ((char *)pDB->vaddr)[i] = 0;
1935 }
1936 ptxd->len = ETH_ZLEN;
1937 }
1938 else
1939 ptxd->len = skb->len;
1940
1941 ptxd->buff_stat = pDB->dma_addr | TX_DMA_ENABLE;
1942 au_sync();
1943 dev_kfree_skb(skb);
1944 aup->tx_head = (aup->tx_head + 1) & (NUM_TX_DMA - 1);
1945 dev->trans_start = jiffies;
1946 return 0;
1947 }
1948
1949
1950 static inline void update_rx_stats(struct net_device *dev, u32 status)
1951 {
1952 struct au1000_private *aup = (struct au1000_private *) dev->priv;
1953 struct net_device_stats *ps = &aup->stats;
1954
1955 ps->rx_packets++;
1956 if (status & RX_MCAST_FRAME)
1957 ps->multicast++;
1958
1959 if (status & RX_ERROR) {
1960 ps->rx_errors++;
1961 if (status & RX_MISSED_FRAME)
1962 ps->rx_missed_errors++;
1963 if (status & (RX_OVERLEN | RX_OVERLEN | RX_LEN_ERROR))
1964 ps->rx_length_errors++;
1965 if (status & RX_CRC_ERROR)
1966 ps->rx_crc_errors++;
1967 if (status & RX_COLL)
1968 ps->collisions++;
1969 }
1970 else
1971 ps->rx_bytes += status & RX_FRAME_LEN_MASK;
1972
1973 }
1974
1975 /*
1976 * Au1000 receive routine.
1977 */
1978 static int au1000_rx(struct net_device *dev)
1979 {
1980 struct au1000_private *aup = (struct au1000_private *) dev->priv;
1981 struct sk_buff *skb;
1982 volatile rx_dma_t *prxd;
1983 u32 buff_stat, status;
1984 db_dest_t *pDB;
1985 u32 frmlen;
1986
1987 if (au1000_debug > 5)
1988 printk("%s: au1000_rx head %d\n", dev->name, aup->rx_head);
1989
1990 prxd = aup->rx_dma_ring[aup->rx_head];
1991 buff_stat = prxd->buff_stat;
1992 while (buff_stat & RX_T_DONE) {
1993 status = prxd->status;
1994 pDB = aup->rx_db_inuse[aup->rx_head];
1995 update_rx_stats(dev, status);
1996 if (!(status & RX_ERROR)) {
1997
1998 /* good frame */
1999 frmlen = (status & RX_FRAME_LEN_MASK);
2000 frmlen -= 4; /* Remove FCS */
2001 skb = dev_alloc_skb(frmlen + 2);
2002 if (skb == NULL) {
2003 printk(KERN_ERR
2004 "%s: Memory squeeze, dropping packet.\n",
2005 dev->name);
2006 aup->stats.rx_dropped++;
2007 continue;
2008 }
2009 skb->dev = dev;
2010 skb_reserve(skb, 2); /* 16 byte IP header align */
2011 eth_copy_and_sum(skb,
2012 (unsigned char *)pDB->vaddr, frmlen, 0);
2013 skb_put(skb, frmlen);
2014 skb->protocol = eth_type_trans(skb, dev);
2015 netif_rx(skb); /* pass the packet to upper layers */
2016 }
2017 else {
2018 if (au1000_debug > 4) {
2019 if (status & RX_MISSED_FRAME)
2020 printk("rx miss\n");
2021 if (status & RX_WDOG_TIMER)
2022 printk("rx wdog\n");
2023 if (status & RX_RUNT)
2024 printk("rx runt\n");
2025 if (status & RX_OVERLEN)
2026 printk("rx overlen\n");
2027 if (status & RX_COLL)
2028 printk("rx coll\n");
2029 if (status & RX_MII_ERROR)
2030 printk("rx mii error\n");
2031 if (status & RX_CRC_ERROR)
2032 printk("rx crc error\n");
2033 if (status & RX_LEN_ERROR)
2034 printk("rx len error\n");
2035 if (status & RX_U_CNTRL_FRAME)
2036 printk("rx u control frame\n");
2037 if (status & RX_MISSED_FRAME)
2038 printk("rx miss\n");
2039 }
2040 }
2041 prxd->buff_stat = (u32)(pDB->dma_addr | RX_DMA_ENABLE);
2042 aup->rx_head = (aup->rx_head + 1) & (NUM_RX_DMA - 1);
2043 au_sync();
2044
2045 /* next descriptor */
2046 prxd = aup->rx_dma_ring[aup->rx_head];
2047 buff_stat = prxd->buff_stat;
2048 dev->last_rx = jiffies;
2049 }
2050 return 0;
2051 }
2052
2053
2054 /*
2055 * Au1000 interrupt service routine.
2056 */
2057 static irqreturn_t au1000_interrupt(int irq, void *dev_id, struct pt_regs *regs)
2058 {
2059 struct net_device *dev = (struct net_device *) dev_id;
2060
2061 if (dev == NULL) {
2062 printk(KERN_ERR "%s: isr: null dev ptr\n", dev->name);
2063 return IRQ_RETVAL(1);
2064 }
2065
2066 /* Handle RX interrupts first to minimize chance of overrun */
2067
2068 au1000_rx(dev);
2069 au1000_tx_ack(dev);
2070 return IRQ_RETVAL(1);
2071 }
2072
2073
2074 /*
2075 * The Tx ring has been full longer than the watchdog timeout
2076 * value. The transmitter must be hung?
2077 */
2078 static void au1000_tx_timeout(struct net_device *dev)
2079 {
2080 printk(KERN_ERR "%s: au1000_tx_timeout: dev=%p\n", dev->name, dev);
2081 reset_mac(dev);
2082 au1000_init(dev);
2083 dev->trans_start = jiffies;
2084 netif_wake_queue(dev);
2085 }
2086
2087
2088 static unsigned const ethernet_polynomial = 0x04c11db7U;
2089 static inline u32 ether_crc(int length, unsigned char *data)
2090 {
2091 int crc = -1;
2092
2093 while(--length >= 0) {
2094 unsigned char current_octet = *data++;
2095 int bit;
2096 for (bit = 0; bit < 8; bit++, current_octet >>= 1)
2097 crc = (crc << 1) ^
2098 ((crc < 0) ^ (current_octet & 1) ?
2099 ethernet_polynomial : 0);
2100 }
2101 return crc;
2102 }
2103
2104 static void set_rx_mode(struct net_device *dev)
2105 {
2106 struct au1000_private *aup = (struct au1000_private *) dev->priv;
2107
2108 if (au1000_debug > 4)
2109 printk("%s: set_rx_mode: flags=%x\n", dev->name, dev->flags);
2110
2111 if (dev->flags & IFF_PROMISC) { /* Set promiscuous. */
2112 aup->mac->control |= MAC_PROMISCUOUS;
2113 printk(KERN_INFO "%s: Promiscuous mode enabled.\n", dev->name);
2114 } else if ((dev->flags & IFF_ALLMULTI) ||
2115 dev->mc_count > MULTICAST_FILTER_LIMIT) {
2116 aup->mac->control |= MAC_PASS_ALL_MULTI;
2117 aup->mac->control &= ~MAC_PROMISCUOUS;
2118 printk(KERN_INFO "%s: Pass all multicast\n", dev->name);
2119 } else {
2120 int i;
2121 struct dev_mc_list *mclist;
2122 u32 mc_filter[2]; /* Multicast hash filter */
2123
2124 mc_filter[1] = mc_filter[0] = 0;
2125 for (i = 0, mclist = dev->mc_list; mclist && i < dev->mc_count;
2126 i++, mclist = mclist->next) {
2127 set_bit(ether_crc(ETH_ALEN, mclist->dmi_addr)>>26,
2128 (long *)mc_filter);
2129 }
2130 aup->mac->multi_hash_high = mc_filter[1];
2131 aup->mac->multi_hash_low = mc_filter[0];
2132 aup->mac->control &= ~MAC_PROMISCUOUS;
2133 aup->mac->control |= MAC_HASH_MODE;
2134 }
2135 }
2136
2137
2138 static int au1000_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
2139 {
2140 struct au1000_private *aup = (struct au1000_private *)dev->priv;
2141 u16 *data = (u16 *)&rq->ifr_ifru;
2142
2143 switch(cmd) {
2144 case SIOCDEVPRIVATE: /* Get the address of the PHY in use. */
2145 case SIOCGMIIPHY:
2146 if (!netif_running(dev)) return -EINVAL;
2147 data[0] = aup->phy_addr;
2148 case SIOCDEVPRIVATE+1: /* Read the specified MII register. */
2149 case SIOCGMIIREG:
2150 data[3] = mdio_read(dev, data[0], data[1]);
2151 return 0;
2152 case SIOCDEVPRIVATE+2: /* Write the specified MII register */
2153 case SIOCSMIIREG:
2154 if (!capable(CAP_NET_ADMIN))
2155 return -EPERM;
2156 mdio_write(dev, data[0], data[1],data[2]);
2157 return 0;
2158 default:
2159 return -EOPNOTSUPP;
2160 }
2161
2162 }
2163
2164
2165 static int au1000_set_config(struct net_device *dev, struct ifmap *map)
2166 {
2167 struct au1000_private *aup = (struct au1000_private *) dev->priv;
2168 u16 control;
2169
2170 if (au1000_debug > 4) {
2171 printk("%s: set_config called: dev->if_port %d map->port %x\n",
2172 dev->name, dev->if_port, map->port);
2173 }
2174
2175 switch(map->port){
2176 case IF_PORT_UNKNOWN: /* use auto here */
2177 printk(KERN_INFO "%s: config phy for aneg\n",
2178 dev->name);
2179 dev->if_port = map->port;
2180 /* Link Down: the timer will bring it up */
2181 netif_carrier_off(dev);
2182
2183 /* read current control */
2184 control = mdio_read(dev, aup->phy_addr, MII_CONTROL);
2185 control &= ~(MII_CNTL_FDX | MII_CNTL_F100);
2186
2187 /* enable auto negotiation and reset the negotiation */
2188 mdio_write(dev, aup->phy_addr, MII_CONTROL,
2189 control | MII_CNTL_AUTO |
2190 MII_CNTL_RST_AUTO);
2191
2192 break;
2193
2194 case IF_PORT_10BASET: /* 10BaseT */
2195 printk(KERN_INFO "%s: config phy for 10BaseT\n",
2196 dev->name);
2197 dev->if_port = map->port;
2198
2199 /* Link Down: the timer will bring it up */
2200 netif_carrier_off(dev);
2201
2202 /* set Speed to 10Mbps, Half Duplex */
2203 control = mdio_read(dev, aup->phy_addr, MII_CONTROL);
2204 control &= ~(MII_CNTL_F100 | MII_CNTL_AUTO |
2205 MII_CNTL_FDX);
2206
2207 /* disable auto negotiation and force 10M/HD mode*/
2208 mdio_write(dev, aup->phy_addr, MII_CONTROL, control);
2209 break;
2210
2211 case IF_PORT_100BASET: /* 100BaseT */
2212 case IF_PORT_100BASETX: /* 100BaseTx */
2213 printk(KERN_INFO "%s: config phy for 100BaseTX\n",
2214 dev->name);
2215 dev->if_port = map->port;
2216
2217 /* Link Down: the timer will bring it up */
2218 netif_carrier_off(dev);
2219
2220 /* set Speed to 100Mbps, Half Duplex */
2221 /* disable auto negotiation and enable 100MBit Mode */
2222 control = mdio_read(dev, aup->phy_addr, MII_CONTROL);
2223 control &= ~(MII_CNTL_AUTO | MII_CNTL_FDX);
2224 control |= MII_CNTL_F100;
2225 mdio_write(dev, aup->phy_addr, MII_CONTROL, control);
2226 break;
2227
2228 case IF_PORT_100BASEFX: /* 100BaseFx */
2229 printk(KERN_INFO "%s: config phy for 100BaseFX\n",
2230 dev->name);
2231 dev->if_port = map->port;
2232
2233 /* Link Down: the timer will bring it up */
2234 netif_carrier_off(dev);
2235
2236 /* set Speed to 100Mbps, Full Duplex */
2237 /* disable auto negotiation and enable 100MBit Mode */
2238 control = mdio_read(dev, aup->phy_addr, MII_CONTROL);
2239 control &= ~MII_CNTL_AUTO;
2240 control |= MII_CNTL_F100 | MII_CNTL_FDX;
2241 mdio_write(dev, aup->phy_addr, MII_CONTROL, control);
2242 break;
2243 case IF_PORT_10BASE2: /* 10Base2 */
2244 case IF_PORT_AUI: /* AUI */
2245 /* These Modes are not supported (are they?)*/
2246 printk(KERN_ERR "%s: 10Base2/AUI not supported",
2247 dev->name);
2248 return -EOPNOTSUPP;
2249 break;
2250
2251 default:
2252 printk(KERN_ERR "%s: Invalid media selected",
2253 dev->name);
2254 return -EINVAL;
2255 }
2256 return 0;
2257 }
2258
2259 static struct net_device_stats *au1000_get_stats(struct net_device *dev)
2260 {
2261 struct au1000_private *aup = (struct au1000_private *) dev->priv;
2262
2263 if (au1000_debug > 4)
2264 printk("%s: au1000_get_stats: dev=%p\n", dev->name, dev);
2265
2266 if (netif_device_present(dev)) {
2267 return &aup->stats;
2268 }
2269 return 0;
2270 }
2271
2272 module_init(au1000_init_module);
2273 module_exit(au1000_cleanup_module);
Linux 2.6 libata-dev (mirror)