1 /*******************************************************************************
3 Intel 10 Gigabit PCI Express Linux driver
4 Copyright(c) 1999 - 2012 Intel Corporation.
6 This program is free software; you can redistribute it and/or modify it
7 under the terms and conditions of the GNU General Public License,
8 version 2, as published by the Free Software Foundation.
10 This program is distributed in the hope it will be useful, but WITHOUT
11 ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
12 FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
15 You should have received a copy of the GNU General Public License along with
16 this program; if not, write to the Free Software Foundation, Inc.,
17 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
19 The full GNU General Public License is included in this distribution in
20 the file called "COPYING".
23 e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
24 Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
26 *******************************************************************************/
29 #include "ixgbe_sriov.h"
32 * ixgbe_cache_ring_rss - Descriptor ring to register mapping for RSS
33 * @adapter: board private structure to initialize
35 * Cache the descriptor ring offsets for RSS to the assigned rings.
38 static inline bool ixgbe_cache_ring_rss(struct ixgbe_adapter
*adapter
)
42 if (!(adapter
->flags
& IXGBE_FLAG_RSS_ENABLED
))
45 for (i
= 0; i
< adapter
->num_rx_queues
; i
++)
46 adapter
->rx_ring
[i
]->reg_idx
= i
;
47 for (i
= 0; i
< adapter
->num_tx_queues
; i
++)
48 adapter
->tx_ring
[i
]->reg_idx
= i
;
52 #ifdef CONFIG_IXGBE_DCB
54 /* ixgbe_get_first_reg_idx - Return first register index associated with ring */
55 static void ixgbe_get_first_reg_idx(struct ixgbe_adapter
*adapter
, u8 tc
,
56 unsigned int *tx
, unsigned int *rx
)
58 struct net_device
*dev
= adapter
->netdev
;
59 struct ixgbe_hw
*hw
= &adapter
->hw
;
60 u8 num_tcs
= netdev_get_num_tc(dev
);
65 switch (hw
->mac
.type
) {
66 case ixgbe_mac_82598EB
:
70 case ixgbe_mac_82599EB
:
77 *tx
= ((tc
+ 2) << 4);
79 } else if (tc
< num_tcs
) {
80 *tx
= ((tc
+ 8) << 3);
109 * ixgbe_cache_ring_dcb - Descriptor ring to register mapping for DCB
110 * @adapter: board private structure to initialize
112 * Cache the descriptor ring offsets for DCB to the assigned rings.
115 static inline bool ixgbe_cache_ring_dcb(struct ixgbe_adapter
*adapter
)
117 struct net_device
*dev
= adapter
->netdev
;
119 u8 num_tcs
= netdev_get_num_tc(dev
);
124 for (i
= 0, k
= 0; i
< num_tcs
; i
++) {
125 unsigned int tx_s
, rx_s
;
126 u16 count
= dev
->tc_to_txq
[i
].count
;
128 ixgbe_get_first_reg_idx(adapter
, i
, &tx_s
, &rx_s
);
129 for (j
= 0; j
< count
; j
++, k
++) {
130 adapter
->tx_ring
[k
]->reg_idx
= tx_s
+ j
;
131 adapter
->rx_ring
[k
]->reg_idx
= rx_s
+ j
;
132 adapter
->tx_ring
[k
]->dcb_tc
= i
;
133 adapter
->rx_ring
[k
]->dcb_tc
= i
;
142 * ixgbe_cache_ring_fdir - Descriptor ring to register mapping for Flow Director
143 * @adapter: board private structure to initialize
145 * Cache the descriptor ring offsets for Flow Director to the assigned rings.
148 static inline bool ixgbe_cache_ring_fdir(struct ixgbe_adapter
*adapter
)
153 if ((adapter
->flags
& IXGBE_FLAG_RSS_ENABLED
) &&
154 (adapter
->flags
& IXGBE_FLAG_FDIR_HASH_CAPABLE
)) {
155 for (i
= 0; i
< adapter
->num_rx_queues
; i
++)
156 adapter
->rx_ring
[i
]->reg_idx
= i
;
157 for (i
= 0; i
< adapter
->num_tx_queues
; i
++)
158 adapter
->tx_ring
[i
]->reg_idx
= i
;
167 * ixgbe_cache_ring_fcoe - Descriptor ring to register mapping for the FCoE
168 * @adapter: board private structure to initialize
170 * Cache the descriptor ring offsets for FCoE mode to the assigned rings.
173 static inline bool ixgbe_cache_ring_fcoe(struct ixgbe_adapter
*adapter
)
175 struct ixgbe_ring_feature
*f
= &adapter
->ring_feature
[RING_F_FCOE
];
177 u8 fcoe_rx_i
= 0, fcoe_tx_i
= 0;
179 if (!(adapter
->flags
& IXGBE_FLAG_FCOE_ENABLED
))
182 if (adapter
->flags
& IXGBE_FLAG_RSS_ENABLED
) {
183 if (adapter
->flags
& IXGBE_FLAG_FDIR_HASH_CAPABLE
)
184 ixgbe_cache_ring_fdir(adapter
);
186 ixgbe_cache_ring_rss(adapter
);
191 for (i
= 0; i
< f
->indices
; i
++, fcoe_rx_i
++, fcoe_tx_i
++) {
192 adapter
->rx_ring
[f
->mask
+ i
]->reg_idx
= fcoe_rx_i
;
193 adapter
->tx_ring
[f
->mask
+ i
]->reg_idx
= fcoe_tx_i
;
198 #endif /* IXGBE_FCOE */
200 * ixgbe_cache_ring_sriov - Descriptor ring to register mapping for sriov
201 * @adapter: board private structure to initialize
203 * SR-IOV doesn't use any descriptor rings but changes the default if
204 * no other mapping is used.
207 static inline bool ixgbe_cache_ring_sriov(struct ixgbe_adapter
*adapter
)
209 adapter
->rx_ring
[0]->reg_idx
= adapter
->num_vfs
* 2;
210 adapter
->tx_ring
[0]->reg_idx
= adapter
->num_vfs
* 2;
211 if (adapter
->num_vfs
)
218 * ixgbe_cache_ring_register - Descriptor ring to register mapping
219 * @adapter: board private structure to initialize
221 * Once we know the feature-set enabled for the device, we'll cache
222 * the register offset the descriptor ring is assigned to.
224 * Note, the order the various feature calls is important. It must start with
225 * the "most" features enabled at the same time, then trickle down to the
226 * least amount of features turned on at once.
228 static void ixgbe_cache_ring_register(struct ixgbe_adapter
*adapter
)
230 /* start with default case */
231 adapter
->rx_ring
[0]->reg_idx
= 0;
232 adapter
->tx_ring
[0]->reg_idx
= 0;
234 if (ixgbe_cache_ring_sriov(adapter
))
237 #ifdef CONFIG_IXGBE_DCB
238 if (ixgbe_cache_ring_dcb(adapter
))
243 if (ixgbe_cache_ring_fcoe(adapter
))
245 #endif /* IXGBE_FCOE */
247 if (ixgbe_cache_ring_fdir(adapter
))
250 if (ixgbe_cache_ring_rss(adapter
))
255 * ixgbe_set_sriov_queues - Allocate queues for IOV use
256 * @adapter: board private structure to initialize
258 * IOV doesn't actually use anything, so just NAK the
259 * request for now and let the other queue routines
260 * figure out what to do.
262 static inline bool ixgbe_set_sriov_queues(struct ixgbe_adapter
*adapter
)
268 * ixgbe_set_rss_queues - Allocate queues for RSS
269 * @adapter: board private structure to initialize
271 * This is our "base" multiqueue mode. RSS (Receive Side Scaling) will try
272 * to allocate one Rx queue per CPU, and if available, one Tx queue per CPU.
275 static inline bool ixgbe_set_rss_queues(struct ixgbe_adapter
*adapter
)
278 struct ixgbe_ring_feature
*f
= &adapter
->ring_feature
[RING_F_RSS
];
280 if (adapter
->flags
& IXGBE_FLAG_RSS_ENABLED
) {
282 adapter
->num_rx_queues
= f
->indices
;
283 adapter
->num_tx_queues
= f
->indices
;
291 * ixgbe_set_fdir_queues - Allocate queues for Flow Director
292 * @adapter: board private structure to initialize
294 * Flow Director is an advanced Rx filter, attempting to get Rx flows back
295 * to the original CPU that initiated the Tx session. This runs in addition
296 * to RSS, so if a packet doesn't match an FDIR filter, we can still spread the
297 * Rx load across CPUs using RSS.
300 static inline bool ixgbe_set_fdir_queues(struct ixgbe_adapter
*adapter
)
303 struct ixgbe_ring_feature
*f_fdir
= &adapter
->ring_feature
[RING_F_FDIR
];
305 f_fdir
->indices
= min_t(int, num_online_cpus(), f_fdir
->limit
);
309 * Use RSS in addition to Flow Director to ensure the best
310 * distribution of flows across cores, even when an FDIR flow
313 if ((adapter
->flags
& IXGBE_FLAG_RSS_ENABLED
) &&
314 (adapter
->flags
& IXGBE_FLAG_FDIR_HASH_CAPABLE
)) {
315 adapter
->num_tx_queues
= f_fdir
->indices
;
316 adapter
->num_rx_queues
= f_fdir
->indices
;
319 adapter
->flags
&= ~IXGBE_FLAG_FDIR_HASH_CAPABLE
;
326 * ixgbe_set_fcoe_queues - Allocate queues for Fiber Channel over Ethernet (FCoE)
327 * @adapter: board private structure to initialize
329 * FCoE RX FCRETA can use up to 8 rx queues for up to 8 different exchanges.
330 * The ring feature mask is not used as a mask for FCoE, as it can take any 8
331 * rx queues out of the max number of rx queues, instead, it is used as the
332 * index of the first rx queue used by FCoE.
335 static inline bool ixgbe_set_fcoe_queues(struct ixgbe_adapter
*adapter
)
337 struct ixgbe_ring_feature
*f
= &adapter
->ring_feature
[RING_F_FCOE
];
339 if (!(adapter
->flags
& IXGBE_FLAG_FCOE_ENABLED
))
342 f
->indices
= min_t(int, num_online_cpus(), f
->limit
);
344 adapter
->num_rx_queues
= 1;
345 adapter
->num_tx_queues
= 1;
347 if (adapter
->flags
& IXGBE_FLAG_RSS_ENABLED
) {
348 e_info(probe
, "FCoE enabled with RSS\n");
349 if (adapter
->flags
& IXGBE_FLAG_FDIR_HASH_CAPABLE
)
350 ixgbe_set_fdir_queues(adapter
);
352 ixgbe_set_rss_queues(adapter
);
355 /* adding FCoE rx rings to the end */
356 f
->mask
= adapter
->num_rx_queues
;
357 adapter
->num_rx_queues
+= f
->indices
;
358 adapter
->num_tx_queues
+= f
->indices
;
362 #endif /* IXGBE_FCOE */
364 /* Artificial max queue cap per traffic class in DCB mode */
365 #define DCB_QUEUE_CAP 8
367 #ifdef CONFIG_IXGBE_DCB
368 static inline bool ixgbe_set_dcb_queues(struct ixgbe_adapter
*adapter
)
370 int per_tc_q
, q
, i
, offset
= 0;
371 struct net_device
*dev
= adapter
->netdev
;
372 int tcs
= netdev_get_num_tc(dev
);
377 /* Map queue offset and counts onto allocated tx queues */
378 per_tc_q
= min_t(unsigned int, dev
->num_tx_queues
/ tcs
, DCB_QUEUE_CAP
);
379 q
= min_t(int, num_online_cpus(), per_tc_q
);
381 for (i
= 0; i
< tcs
; i
++) {
382 netdev_set_tc_queue(dev
, i
, q
, offset
);
386 adapter
->num_tx_queues
= q
* tcs
;
387 adapter
->num_rx_queues
= q
* tcs
;
390 /* FCoE enabled queues require special configuration indexed
391 * by feature specific indices and mask. Here we map FCoE
392 * indices onto the DCB queue pairs allowing FCoE to own
393 * configuration later.
395 if (adapter
->flags
& IXGBE_FLAG_FCOE_ENABLED
) {
396 u8 prio_tc
[MAX_USER_PRIORITY
] = {0};
398 struct ixgbe_ring_feature
*f
=
399 &adapter
->ring_feature
[RING_F_FCOE
];
401 ixgbe_dcb_unpack_map(&adapter
->dcb_cfg
, DCB_TX_CONFIG
, prio_tc
);
402 tc
= prio_tc
[adapter
->fcoe
.up
];
403 f
->indices
= dev
->tc_to_txq
[tc
].count
;
404 f
->mask
= dev
->tc_to_txq
[tc
].offset
;
413 * ixgbe_set_num_queues - Allocate queues for device, feature dependent
414 * @adapter: board private structure to initialize
416 * This is the top level queue allocation routine. The order here is very
417 * important, starting with the "most" number of features turned on at once,
418 * and ending with the smallest set of features. This way large combinations
419 * can be allocated if they're turned on, and smaller combinations are the
420 * fallthrough conditions.
423 static int ixgbe_set_num_queues(struct ixgbe_adapter
*adapter
)
425 /* Start with base case */
426 adapter
->num_rx_queues
= 1;
427 adapter
->num_tx_queues
= 1;
428 adapter
->num_rx_pools
= adapter
->num_rx_queues
;
429 adapter
->num_rx_queues_per_pool
= 1;
431 if (ixgbe_set_sriov_queues(adapter
))
434 #ifdef CONFIG_IXGBE_DCB
435 if (ixgbe_set_dcb_queues(adapter
))
440 if (ixgbe_set_fcoe_queues(adapter
))
443 #endif /* IXGBE_FCOE */
444 if (ixgbe_set_fdir_queues(adapter
))
447 if (ixgbe_set_rss_queues(adapter
))
450 /* fallback to base case */
451 adapter
->num_rx_queues
= 1;
452 adapter
->num_tx_queues
= 1;
455 if ((adapter
->netdev
->reg_state
== NETREG_UNREGISTERED
) ||
456 (adapter
->netdev
->reg_state
== NETREG_UNREGISTERING
))
459 /* Notify the stack of the (possibly) reduced queue counts. */
460 netif_set_real_num_tx_queues(adapter
->netdev
, adapter
->num_tx_queues
);
461 return netif_set_real_num_rx_queues(adapter
->netdev
,
462 adapter
->num_rx_queues
);
465 static void ixgbe_acquire_msix_vectors(struct ixgbe_adapter
*adapter
,
468 int err
, vector_threshold
;
470 /* We'll want at least 2 (vector_threshold):
471 * 1) TxQ[0] + RxQ[0] handler
472 * 2) Other (Link Status Change, etc.)
474 vector_threshold
= MIN_MSIX_COUNT
;
477 * The more we get, the more we will assign to Tx/Rx Cleanup
478 * for the separate queues...where Rx Cleanup >= Tx Cleanup.
479 * Right now, we simply care about how many we'll get; we'll
480 * set them up later while requesting irq's.
482 while (vectors
>= vector_threshold
) {
483 err
= pci_enable_msix(adapter
->pdev
, adapter
->msix_entries
,
485 if (!err
) /* Success in acquiring all requested vectors. */
488 vectors
= 0; /* Nasty failure, quit now */
489 else /* err == number of vectors we should try again with */
493 if (vectors
< vector_threshold
) {
494 /* Can't allocate enough MSI-X interrupts? Oh well.
495 * This just means we'll go with either a single MSI
496 * vector or fall back to legacy interrupts.
498 netif_printk(adapter
, hw
, KERN_DEBUG
, adapter
->netdev
,
499 "Unable to allocate MSI-X interrupts\n");
500 adapter
->flags
&= ~IXGBE_FLAG_MSIX_ENABLED
;
501 kfree(adapter
->msix_entries
);
502 adapter
->msix_entries
= NULL
;
504 adapter
->flags
|= IXGBE_FLAG_MSIX_ENABLED
; /* Woot! */
506 * Adjust for only the vectors we'll use, which is minimum
507 * of max_msix_q_vectors + NON_Q_VECTORS, or the number of
508 * vectors we were allocated.
510 vectors
-= NON_Q_VECTORS
;
511 adapter
->num_q_vectors
= min(vectors
, adapter
->max_q_vectors
);
515 static void ixgbe_add_ring(struct ixgbe_ring
*ring
,
516 struct ixgbe_ring_container
*head
)
518 ring
->next
= head
->ring
;
524 * ixgbe_alloc_q_vector - Allocate memory for a single interrupt vector
525 * @adapter: board private structure to initialize
526 * @v_count: q_vectors allocated on adapter, used for ring interleaving
527 * @v_idx: index of vector in adapter struct
528 * @txr_count: total number of Tx rings to allocate
529 * @txr_idx: index of first Tx ring to allocate
530 * @rxr_count: total number of Rx rings to allocate
531 * @rxr_idx: index of first Rx ring to allocate
533 * We allocate one q_vector. If allocation fails we return -ENOMEM.
535 static int ixgbe_alloc_q_vector(struct ixgbe_adapter
*adapter
,
536 int v_count
, int v_idx
,
537 int txr_count
, int txr_idx
,
538 int rxr_count
, int rxr_idx
)
540 struct ixgbe_q_vector
*q_vector
;
541 struct ixgbe_ring
*ring
;
544 int ring_count
, size
;
546 ring_count
= txr_count
+ rxr_count
;
547 size
= sizeof(struct ixgbe_q_vector
) +
548 (sizeof(struct ixgbe_ring
) * ring_count
);
550 /* customize cpu for Flow Director mapping */
551 if (adapter
->flags
& IXGBE_FLAG_FDIR_HASH_CAPABLE
) {
552 if (cpu_online(v_idx
)) {
554 node
= cpu_to_node(cpu
);
558 /* allocate q_vector and rings */
559 q_vector
= kzalloc_node(size
, GFP_KERNEL
, node
);
561 q_vector
= kzalloc(size
, GFP_KERNEL
);
565 /* setup affinity mask and node */
567 cpumask_set_cpu(cpu
, &q_vector
->affinity_mask
);
569 cpumask_copy(&q_vector
->affinity_mask
, cpu_online_mask
);
570 q_vector
->numa_node
= node
;
572 /* initialize NAPI */
573 netif_napi_add(adapter
->netdev
, &q_vector
->napi
,
576 /* tie q_vector and adapter together */
577 adapter
->q_vector
[v_idx
] = q_vector
;
578 q_vector
->adapter
= adapter
;
579 q_vector
->v_idx
= v_idx
;
581 /* initialize work limits */
582 q_vector
->tx
.work_limit
= adapter
->tx_work_limit
;
584 /* initialize pointer to rings */
585 ring
= q_vector
->ring
;
588 /* assign generic ring traits */
589 ring
->dev
= &adapter
->pdev
->dev
;
590 ring
->netdev
= adapter
->netdev
;
592 /* configure backlink on ring */
593 ring
->q_vector
= q_vector
;
595 /* update q_vector Tx values */
596 ixgbe_add_ring(ring
, &q_vector
->tx
);
598 /* apply Tx specific ring traits */
599 ring
->count
= adapter
->tx_ring_count
;
600 ring
->queue_index
= txr_idx
;
602 /* assign ring to adapter */
603 adapter
->tx_ring
[txr_idx
] = ring
;
605 /* update count and index */
609 /* push pointer to next ring */
614 /* assign generic ring traits */
615 ring
->dev
= &adapter
->pdev
->dev
;
616 ring
->netdev
= adapter
->netdev
;
618 /* configure backlink on ring */
619 ring
->q_vector
= q_vector
;
621 /* update q_vector Rx values */
622 ixgbe_add_ring(ring
, &q_vector
->rx
);
625 * 82599 errata, UDP frames with a 0 checksum
626 * can be marked as checksum errors.
628 if (adapter
->hw
.mac
.type
== ixgbe_mac_82599EB
)
629 set_bit(__IXGBE_RX_CSUM_UDP_ZERO_ERR
, &ring
->state
);
632 if (adapter
->netdev
->features
& NETIF_F_FCOE_MTU
) {
633 struct ixgbe_ring_feature
*f
;
634 f
= &adapter
->ring_feature
[RING_F_FCOE
];
635 if ((rxr_idx
>= f
->mask
) &&
636 (rxr_idx
< f
->mask
+ f
->indices
))
637 set_bit(__IXGBE_RX_FCOE
, &ring
->state
);
640 #endif /* IXGBE_FCOE */
641 /* apply Rx specific ring traits */
642 ring
->count
= adapter
->rx_ring_count
;
643 ring
->queue_index
= rxr_idx
;
645 /* assign ring to adapter */
646 adapter
->rx_ring
[rxr_idx
] = ring
;
648 /* update count and index */
652 /* push pointer to next ring */
660 * ixgbe_free_q_vector - Free memory allocated for specific interrupt vector
661 * @adapter: board private structure to initialize
662 * @v_idx: Index of vector to be freed
664 * This function frees the memory allocated to the q_vector. In addition if
665 * NAPI is enabled it will delete any references to the NAPI struct prior
666 * to freeing the q_vector.
668 static void ixgbe_free_q_vector(struct ixgbe_adapter
*adapter
, int v_idx
)
670 struct ixgbe_q_vector
*q_vector
= adapter
->q_vector
[v_idx
];
671 struct ixgbe_ring
*ring
;
673 ixgbe_for_each_ring(ring
, q_vector
->tx
)
674 adapter
->tx_ring
[ring
->queue_index
] = NULL
;
676 ixgbe_for_each_ring(ring
, q_vector
->rx
)
677 adapter
->rx_ring
[ring
->queue_index
] = NULL
;
679 adapter
->q_vector
[v_idx
] = NULL
;
680 netif_napi_del(&q_vector
->napi
);
683 * ixgbe_get_stats64() might access the rings on this vector,
684 * we must wait a grace period before freeing it.
686 kfree_rcu(q_vector
, rcu
);
690 * ixgbe_alloc_q_vectors - Allocate memory for interrupt vectors
691 * @adapter: board private structure to initialize
693 * We allocate one q_vector per queue interrupt. If allocation fails we
696 static int ixgbe_alloc_q_vectors(struct ixgbe_adapter
*adapter
)
698 int q_vectors
= adapter
->num_q_vectors
;
699 int rxr_remaining
= adapter
->num_rx_queues
;
700 int txr_remaining
= adapter
->num_tx_queues
;
701 int rxr_idx
= 0, txr_idx
= 0, v_idx
= 0;
704 /* only one q_vector if MSI-X is disabled. */
705 if (!(adapter
->flags
& IXGBE_FLAG_MSIX_ENABLED
))
708 if (q_vectors
>= (rxr_remaining
+ txr_remaining
)) {
709 for (; rxr_remaining
; v_idx
++) {
710 err
= ixgbe_alloc_q_vector(adapter
, q_vectors
, v_idx
,
716 /* update counts and index */
722 for (; v_idx
< q_vectors
; v_idx
++) {
723 int rqpv
= DIV_ROUND_UP(rxr_remaining
, q_vectors
- v_idx
);
724 int tqpv
= DIV_ROUND_UP(txr_remaining
, q_vectors
- v_idx
);
725 err
= ixgbe_alloc_q_vector(adapter
, q_vectors
, v_idx
,
732 /* update counts and index */
733 rxr_remaining
-= rqpv
;
734 txr_remaining
-= tqpv
;
742 adapter
->num_tx_queues
= 0;
743 adapter
->num_rx_queues
= 0;
744 adapter
->num_q_vectors
= 0;
747 ixgbe_free_q_vector(adapter
, v_idx
);
753 * ixgbe_free_q_vectors - Free memory allocated for interrupt vectors
754 * @adapter: board private structure to initialize
756 * This function frees the memory allocated to the q_vectors. In addition if
757 * NAPI is enabled it will delete any references to the NAPI struct prior
758 * to freeing the q_vector.
760 static void ixgbe_free_q_vectors(struct ixgbe_adapter
*adapter
)
762 int v_idx
= adapter
->num_q_vectors
;
764 adapter
->num_tx_queues
= 0;
765 adapter
->num_rx_queues
= 0;
766 adapter
->num_q_vectors
= 0;
769 ixgbe_free_q_vector(adapter
, v_idx
);
772 static void ixgbe_reset_interrupt_capability(struct ixgbe_adapter
*adapter
)
774 if (adapter
->flags
& IXGBE_FLAG_MSIX_ENABLED
) {
775 adapter
->flags
&= ~IXGBE_FLAG_MSIX_ENABLED
;
776 pci_disable_msix(adapter
->pdev
);
777 kfree(adapter
->msix_entries
);
778 adapter
->msix_entries
= NULL
;
779 } else if (adapter
->flags
& IXGBE_FLAG_MSI_ENABLED
) {
780 adapter
->flags
&= ~IXGBE_FLAG_MSI_ENABLED
;
781 pci_disable_msi(adapter
->pdev
);
786 * ixgbe_set_interrupt_capability - set MSI-X or MSI if supported
787 * @adapter: board private structure to initialize
789 * Attempt to configure the interrupts using the best available
790 * capabilities of the hardware and the kernel.
792 static int ixgbe_set_interrupt_capability(struct ixgbe_adapter
*adapter
)
794 struct ixgbe_hw
*hw
= &adapter
->hw
;
796 int vector
, v_budget
;
799 * It's easy to be greedy for MSI-X vectors, but it really
800 * doesn't do us much good if we have a lot more vectors
801 * than CPU's. So let's be conservative and only ask for
802 * (roughly) the same number of vectors as there are CPU's.
803 * The default is to use pairs of vectors.
805 v_budget
= max(adapter
->num_rx_queues
, adapter
->num_tx_queues
);
806 v_budget
= min_t(int, v_budget
, num_online_cpus());
807 v_budget
+= NON_Q_VECTORS
;
810 * At the same time, hardware can only support a maximum of
811 * hw.mac->max_msix_vectors vectors. With features
812 * such as RSS and VMDq, we can easily surpass the number of Rx and Tx
813 * descriptor queues supported by our device. Thus, we cap it off in
814 * those rare cases where the cpu count also exceeds our vector limit.
816 v_budget
= min_t(int, v_budget
, hw
->mac
.max_msix_vectors
);
818 /* A failure in MSI-X entry allocation isn't fatal, but it does
819 * mean we disable MSI-X capabilities of the adapter. */
820 adapter
->msix_entries
= kcalloc(v_budget
,
821 sizeof(struct msix_entry
), GFP_KERNEL
);
822 if (adapter
->msix_entries
) {
823 for (vector
= 0; vector
< v_budget
; vector
++)
824 adapter
->msix_entries
[vector
].entry
= vector
;
826 ixgbe_acquire_msix_vectors(adapter
, v_budget
);
828 if (adapter
->flags
& IXGBE_FLAG_MSIX_ENABLED
)
832 adapter
->flags
&= ~IXGBE_FLAG_DCB_ENABLED
;
833 adapter
->flags
&= ~IXGBE_FLAG_RSS_ENABLED
;
834 if (adapter
->flags
& IXGBE_FLAG_FDIR_HASH_CAPABLE
) {
836 "ATR is not supported while multiple "
837 "queues are disabled. Disabling Flow Director\n");
839 adapter
->flags
&= ~IXGBE_FLAG_FDIR_HASH_CAPABLE
;
840 adapter
->atr_sample_rate
= 0;
841 if (adapter
->flags
& IXGBE_FLAG_SRIOV_ENABLED
)
842 ixgbe_disable_sriov(adapter
);
844 err
= ixgbe_set_num_queues(adapter
);
848 adapter
->num_q_vectors
= 1;
850 err
= pci_enable_msi(adapter
->pdev
);
852 adapter
->flags
|= IXGBE_FLAG_MSI_ENABLED
;
854 netif_printk(adapter
, hw
, KERN_DEBUG
, adapter
->netdev
,
855 "Unable to allocate MSI interrupt, "
856 "falling back to legacy. Error: %d\n", err
);
866 * ixgbe_init_interrupt_scheme - Determine proper interrupt scheme
867 * @adapter: board private structure to initialize
869 * We determine which interrupt scheme to use based on...
870 * - Kernel support (MSI, MSI-X)
871 * - which can be user-defined (via MODULE_PARAM)
872 * - Hardware queue count (num_*_queues)
873 * - defined by miscellaneous hardware support/features (RSS, etc.)
875 int ixgbe_init_interrupt_scheme(struct ixgbe_adapter
*adapter
)
879 /* Number of supported queues */
880 err
= ixgbe_set_num_queues(adapter
);
884 err
= ixgbe_set_interrupt_capability(adapter
);
886 e_dev_err("Unable to setup interrupt capabilities\n");
887 goto err_set_interrupt
;
890 err
= ixgbe_alloc_q_vectors(adapter
);
892 e_dev_err("Unable to allocate memory for queue vectors\n");
893 goto err_alloc_q_vectors
;
896 ixgbe_cache_ring_register(adapter
);
898 e_dev_info("Multiqueue %s: Rx Queue count = %u, Tx Queue count = %u\n",
899 (adapter
->num_rx_queues
> 1) ? "Enabled" : "Disabled",
900 adapter
->num_rx_queues
, adapter
->num_tx_queues
);
902 set_bit(__IXGBE_DOWN
, &adapter
->state
);
907 ixgbe_reset_interrupt_capability(adapter
);
913 * ixgbe_clear_interrupt_scheme - Clear the current interrupt scheme settings
914 * @adapter: board private structure to clear interrupt scheme on
916 * We go through and clear interrupt specific resources and reset the structure
917 * to pre-load conditions
919 void ixgbe_clear_interrupt_scheme(struct ixgbe_adapter
*adapter
)
921 adapter
->num_tx_queues
= 0;
922 adapter
->num_rx_queues
= 0;
924 ixgbe_free_q_vectors(adapter
);
925 ixgbe_reset_interrupt_capability(adapter
);
928 void ixgbe_tx_ctxtdesc(struct ixgbe_ring
*tx_ring
, u32 vlan_macip_lens
,
929 u32 fcoe_sof_eof
, u32 type_tucmd
, u32 mss_l4len_idx
)
931 struct ixgbe_adv_tx_context_desc
*context_desc
;
932 u16 i
= tx_ring
->next_to_use
;
934 context_desc
= IXGBE_TX_CTXTDESC(tx_ring
, i
);
937 tx_ring
->next_to_use
= (i
< tx_ring
->count
) ? i
: 0;
939 /* set bits to identify this as an advanced context descriptor */
940 type_tucmd
|= IXGBE_TXD_CMD_DEXT
| IXGBE_ADVTXD_DTYP_CTXT
;
942 context_desc
->vlan_macip_lens
= cpu_to_le32(vlan_macip_lens
);
943 context_desc
->seqnum_seed
= cpu_to_le32(fcoe_sof_eof
);
944 context_desc
->type_tucmd_mlhl
= cpu_to_le32(type_tucmd
);
945 context_desc
->mss_l4len_idx
= cpu_to_le32(mss_l4len_idx
);