?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
drm/radeon: remove cayman_gpu_is_lockup
[linux-2.6/libata-dev.git] / drivers / usb / otg / isp1301_omap.c
blob70cf5d7bca48ed25ee08aa6e5fa40dec52b4268a
1 /*
2 * isp1301_omap - ISP 1301 USB transceiver, talking to OMAP OTG controller
3 *
4 * Copyright (C) 2004 Texas Instruments
5 * Copyright (C) 2004 David Brownell
6 *
7 * This program is free software; you can redistribute it and/or modify
8 * it under the terms of the GNU General Public License as published by
9 * the Free Software Foundation; either version 2 of the License, or
10 * (at your option) any later version.
11 *
12 * This program is distributed in the hope that it will be useful,
13 * but WITHOUT ANY WARRANTY; without even the implied warranty of
14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15 * GNU General Public License for more details.
16 *
17 * You should have received a copy of the GNU General Public License
18 * along with this program; if not, write to the Free Software
19 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
20 */
21
22 #include <linux/kernel.h>
23 #include <linux/module.h>
24 #include <linux/init.h>
25 #include <linux/slab.h>
26 #include <linux/interrupt.h>
27 #include <linux/platform_device.h>
28 #include <linux/gpio.h>
29 #include <linux/usb/ch9.h>
30 #include <linux/usb/gadget.h>
31 #include <linux/usb.h>
32 #include <linux/usb/otg.h>
33 #include <linux/i2c.h>
34 #include <linux/workqueue.h>
35
36 #include <asm/irq.h>
37 #include <asm/mach-types.h>
38
39 #include <plat/usb.h>
40 #include <plat/mux.h>
41
42
43 #ifndef DEBUG
44 #undef VERBOSE
45 #endif
46
47
48 #define DRIVER_VERSION "24 August 2004"
49 #define DRIVER_NAME (isp1301_driver.driver.name)
50
51 MODULE_DESCRIPTION("ISP1301 USB OTG Transceiver Driver");
52 MODULE_LICENSE("GPL");
53
54 struct isp1301 {
55 struct usb_phy phy;
56 struct i2c_client *client;
57 void (*i2c_release)(struct device *dev);
58
59 int irq_type;
60
61 u32 last_otg_ctrl;
62 unsigned working:1;
63
64 struct timer_list timer;
65
66 /* use keventd context to change the state for us */
67 struct work_struct work;
68
69 unsigned long todo;
70 # define WORK_UPDATE_ISP 0 /* update ISP from OTG */
71 # define WORK_UPDATE_OTG 1 /* update OTG from ISP */
72 # define WORK_HOST_RESUME 4 /* resume host */
73 # define WORK_TIMER 6 /* timer fired */
74 # define WORK_STOP 7 /* don't resubmit */
75 };
76
77
78 /* bits in OTG_CTRL */
79
80 #define OTG_XCEIV_OUTPUTS \
81 (OTG_ASESSVLD|OTG_BSESSEND|OTG_BSESSVLD|OTG_VBUSVLD|OTG_ID)
82 #define OTG_XCEIV_INPUTS \
83 (OTG_PULLDOWN|OTG_PULLUP|OTG_DRV_VBUS|OTG_PD_VBUS|OTG_PU_VBUS|OTG_PU_ID)
84 #define OTG_CTRL_BITS \
85 (OTG_A_BUSREQ|OTG_A_SETB_HNPEN|OTG_B_BUSREQ|OTG_B_HNPEN|OTG_BUSDROP)
86 /* and OTG_PULLUP is sometimes written */
87
88 #define OTG_CTRL_MASK (OTG_DRIVER_SEL| \
89 OTG_XCEIV_OUTPUTS|OTG_XCEIV_INPUTS| \
90 OTG_CTRL_BITS)
91
92
93 /*-------------------------------------------------------------------------*/
94
95 /* board-specific PM hooks */
96
97 #if defined(CONFIG_MACH_OMAP_H2) || defined(CONFIG_MACH_OMAP_H3)
98
99 #if defined(CONFIG_TPS65010) || defined(CONFIG_TPS65010_MODULE)
100
101 #include <linux/i2c/tps65010.h>
102
103 #else
104
105 static inline int tps65010_set_vbus_draw(unsigned mA)
106 {
107 pr_debug("tps65010: draw %d mA (STUB)\n", mA);
108 return 0;
109 }
110
111 #endif
112
113 static void enable_vbus_draw(struct isp1301 *isp, unsigned mA)
114 {
115 int status = tps65010_set_vbus_draw(mA);
116 if (status < 0)
117 pr_debug(" VBUS %d mA error %d\n", mA, status);
118 }
119
120 #else
121
122 static void enable_vbus_draw(struct isp1301 *isp, unsigned mA)
123 {
124 /* H4 controls this by DIP switch S2.4; no soft control.
125 * ON means the charger is always enabled. Leave it OFF
126 * unless the OTG port is used only in B-peripheral mode.
127 */
128 }
129
130 #endif
131
132 static void enable_vbus_source(struct isp1301 *isp)
133 {
134 /* this board won't supply more than 8mA vbus power.
135 * some boards can switch a 100ma "unit load" (or more).
136 */
137 }
138
139
140 /* products will deliver OTG messages with LEDs, GUI, etc */
141 static inline void notresponding(struct isp1301 *isp)
142 {
143 printk(KERN_NOTICE "OTG device not responding.\n");
144 }
145
146
147 /*-------------------------------------------------------------------------*/
148
149 static struct i2c_driver isp1301_driver;
150
151 /* smbus apis are used for portability */
152
153 static inline u8
154 isp1301_get_u8(struct isp1301 *isp, u8 reg)
155 {
156 return i2c_smbus_read_byte_data(isp->client, reg + 0);
157 }
158
159 static inline int
160 isp1301_get_u16(struct isp1301 *isp, u8 reg)
161 {
162 return i2c_smbus_read_word_data(isp->client, reg);
163 }
164
165 static inline int
166 isp1301_set_bits(struct isp1301 *isp, u8 reg, u8 bits)
167 {
168 return i2c_smbus_write_byte_data(isp->client, reg + 0, bits);
169 }
170
171 static inline int
172 isp1301_clear_bits(struct isp1301 *isp, u8 reg, u8 bits)
173 {
174 return i2c_smbus_write_byte_data(isp->client, reg + 1, bits);
175 }
176
177 /*-------------------------------------------------------------------------*/
178
179 /* identification */
180 #define ISP1301_VENDOR_ID 0x00 /* u16 read */
181 #define ISP1301_PRODUCT_ID 0x02 /* u16 read */
182 #define ISP1301_BCD_DEVICE 0x14 /* u16 read */
183
184 #define I2C_VENDOR_ID_PHILIPS 0x04cc
185 #define I2C_PRODUCT_ID_PHILIPS_1301 0x1301
186
187 /* operational registers */
188 #define ISP1301_MODE_CONTROL_1 0x04 /* u8 read, set, +1 clear */
189 # define MC1_SPEED (1 << 0)
190 # define MC1_SUSPEND (1 << 1)
191 # define MC1_DAT_SE0 (1 << 2)
192 # define MC1_TRANSPARENT (1 << 3)
193 # define MC1_BDIS_ACON_EN (1 << 4)
194 # define MC1_OE_INT_EN (1 << 5)
195 # define MC1_UART_EN (1 << 6)
196 # define MC1_MASK 0x7f
197 #define ISP1301_MODE_CONTROL_2 0x12 /* u8 read, set, +1 clear */
198 # define MC2_GLOBAL_PWR_DN (1 << 0)
199 # define MC2_SPD_SUSP_CTRL (1 << 1)
200 # define MC2_BI_DI (1 << 2)
201 # define MC2_TRANSP_BDIR0 (1 << 3)
202 # define MC2_TRANSP_BDIR1 (1 << 4)
203 # define MC2_AUDIO_EN (1 << 5)
204 # define MC2_PSW_EN (1 << 6)
205 # define MC2_EN2V7 (1 << 7)
206 #define ISP1301_OTG_CONTROL_1 0x06 /* u8 read, set, +1 clear */
207 # define OTG1_DP_PULLUP (1 << 0)
208 # define OTG1_DM_PULLUP (1 << 1)
209 # define OTG1_DP_PULLDOWN (1 << 2)
210 # define OTG1_DM_PULLDOWN (1 << 3)
211 # define OTG1_ID_PULLDOWN (1 << 4)
212 # define OTG1_VBUS_DRV (1 << 5)
213 # define OTG1_VBUS_DISCHRG (1 << 6)
214 # define OTG1_VBUS_CHRG (1 << 7)
215 #define ISP1301_OTG_STATUS 0x10 /* u8 readonly */
216 # define OTG_B_SESS_END (1 << 6)
217 # define OTG_B_SESS_VLD (1 << 7)
218
219 #define ISP1301_INTERRUPT_SOURCE 0x08 /* u8 read */
220 #define ISP1301_INTERRUPT_LATCH 0x0A /* u8 read, set, +1 clear */
221
222 #define ISP1301_INTERRUPT_FALLING 0x0C /* u8 read, set, +1 clear */
223 #define ISP1301_INTERRUPT_RISING 0x0E /* u8 read, set, +1 clear */
224
225 /* same bitfields in all interrupt registers */
226 # define INTR_VBUS_VLD (1 << 0)
227 # define INTR_SESS_VLD (1 << 1)
228 # define INTR_DP_HI (1 << 2)
229 # define INTR_ID_GND (1 << 3)
230 # define INTR_DM_HI (1 << 4)
231 # define INTR_ID_FLOAT (1 << 5)
232 # define INTR_BDIS_ACON (1 << 6)
233 # define INTR_CR_INT (1 << 7)
234
235 /*-------------------------------------------------------------------------*/
236
237 static inline const char *state_name(struct isp1301 *isp)
238 {
239 return otg_state_string(isp->phy.state);
240 }
241
242 /*-------------------------------------------------------------------------*/
243
244 /* NOTE: some of this ISP1301 setup is specific to H2 boards;
245 * not everything is guarded by board-specific checks, or even using
246 * omap_usb_config data to deduce MC1_DAT_SE0 and MC2_BI_DI.
247 *
248 * ALSO: this currently doesn't use ISP1301 low-power modes
249 * while OTG is running.
250 */
251
252 static void power_down(struct isp1301 *isp)
253 {
254 isp->phy.state = OTG_STATE_UNDEFINED;
255
256 // isp1301_set_bits(isp, ISP1301_MODE_CONTROL_2, MC2_GLOBAL_PWR_DN);
257 isp1301_set_bits(isp, ISP1301_MODE_CONTROL_1, MC1_SUSPEND);
258
259 isp1301_clear_bits(isp, ISP1301_OTG_CONTROL_1, OTG1_ID_PULLDOWN);
260 isp1301_clear_bits(isp, ISP1301_MODE_CONTROL_1, MC1_DAT_SE0);
261 }
262
263 static void power_up(struct isp1301 *isp)
264 {
265 // isp1301_clear_bits(isp, ISP1301_MODE_CONTROL_2, MC2_GLOBAL_PWR_DN);
266 isp1301_clear_bits(isp, ISP1301_MODE_CONTROL_1, MC1_SUSPEND);
267
268 /* do this only when cpu is driving transceiver,
269 * so host won't see a low speed device...
270 */
271 isp1301_set_bits(isp, ISP1301_MODE_CONTROL_1, MC1_DAT_SE0);
272 }
273
274 #define NO_HOST_SUSPEND
275
276 static int host_suspend(struct isp1301 *isp)
277 {
278 #ifdef NO_HOST_SUSPEND
279 return 0;
280 #else
281 struct device *dev;
282
283 if (!isp->phy.otg->host)
284 return -ENODEV;
285
286 /* Currently ASSUMES only the OTG port matters;
287 * other ports could be active...
288 */
289 dev = isp->phy.otg->host->controller;
290 return dev->driver->suspend(dev, 3, 0);
291 #endif
292 }
293
294 static int host_resume(struct isp1301 *isp)
295 {
296 #ifdef NO_HOST_SUSPEND
297 return 0;
298 #else
299 struct device *dev;
300
301 if (!isp->phy.otg->host)
302 return -ENODEV;
303
304 dev = isp->phy.otg->host->controller;
305 return dev->driver->resume(dev, 0);
306 #endif
307 }
308
309 static int gadget_suspend(struct isp1301 *isp)
310 {
311 isp->phy.otg->gadget->b_hnp_enable = 0;
312 isp->phy.otg->gadget->a_hnp_support = 0;
313 isp->phy.otg->gadget->a_alt_hnp_support = 0;
314 return usb_gadget_vbus_disconnect(isp->phy.otg->gadget);
315 }
316
317 /*-------------------------------------------------------------------------*/
318
319 #define TIMER_MINUTES 10
320 #define TIMER_JIFFIES (TIMER_MINUTES * 60 * HZ)
321
322 /* Almost all our I2C messaging comes from a work queue's task context.
323 * NOTE: guaranteeing certain response times might mean we shouldn't
324 * share keventd's work queue; a realtime task might be safest.
325 */
326 static void isp1301_defer_work(struct isp1301 *isp, int work)
327 {
328 int status;
329
330 if (isp && !test_and_set_bit(work, &isp->todo)) {
331 (void) get_device(&isp->client->dev);
332 status = schedule_work(&isp->work);
333 if (!status && !isp->working)
334 dev_vdbg(&isp->client->dev,
335 "work item %d may be lost\n", work);
336 }
337 }
338
339 /* called from irq handlers */
340 static void a_idle(struct isp1301 *isp, const char *tag)
341 {
342 u32 l;
343
344 if (isp->phy.state == OTG_STATE_A_IDLE)
345 return;
346
347 isp->phy.otg->default_a = 1;
348 if (isp->phy.otg->host) {
349 isp->phy.otg->host->is_b_host = 0;
350 host_suspend(isp);
351 }
352 if (isp->phy.otg->gadget) {
353 isp->phy.otg->gadget->is_a_peripheral = 1;
354 gadget_suspend(isp);
355 }
356 isp->phy.state = OTG_STATE_A_IDLE;
357 l = omap_readl(OTG_CTRL) & OTG_XCEIV_OUTPUTS;
358 omap_writel(l, OTG_CTRL);
359 isp->last_otg_ctrl = l;
360 pr_debug(" --> %s/%s\n", state_name(isp), tag);
361 }
362
363 /* called from irq handlers */
364 static void b_idle(struct isp1301 *isp, const char *tag)
365 {
366 u32 l;
367
368 if (isp->phy.state == OTG_STATE_B_IDLE)
369 return;
370
371 isp->phy.otg->default_a = 0;
372 if (isp->phy.otg->host) {
373 isp->phy.otg->host->is_b_host = 1;
374 host_suspend(isp);
375 }
376 if (isp->phy.otg->gadget) {
377 isp->phy.otg->gadget->is_a_peripheral = 0;
378 gadget_suspend(isp);
379 }
380 isp->phy.state = OTG_STATE_B_IDLE;
381 l = omap_readl(OTG_CTRL) & OTG_XCEIV_OUTPUTS;
382 omap_writel(l, OTG_CTRL);
383 isp->last_otg_ctrl = l;
384 pr_debug(" --> %s/%s\n", state_name(isp), tag);
385 }
386
387 static void
388 dump_regs(struct isp1301 *isp, const char *label)
389 {
390 #ifdef DEBUG
391 u8 ctrl = isp1301_get_u8(isp, ISP1301_OTG_CONTROL_1);
392 u8 status = isp1301_get_u8(isp, ISP1301_OTG_STATUS);
393 u8 src = isp1301_get_u8(isp, ISP1301_INTERRUPT_SOURCE);
394
395 pr_debug("otg: %06x, %s %s, otg/%02x stat/%02x.%02x\n",
396 omap_readl(OTG_CTRL), label, state_name(isp),
397 ctrl, status, src);
398 /* mode control and irq enables don't change much */
399 #endif
400 }
401
402 /*-------------------------------------------------------------------------*/
403
404 #ifdef CONFIG_USB_OTG
405
406 /*
407 * The OMAP OTG controller handles most of the OTG state transitions.
408 *
409 * We translate isp1301 outputs (mostly voltage comparator status) into
410 * OTG inputs; OTG outputs (mostly pullup/pulldown controls) and HNP state
411 * flags into isp1301 inputs ... and infer state transitions.
412 */
413
414 #ifdef VERBOSE
415
416 static void check_state(struct isp1301 *isp, const char *tag)
417 {
418 enum usb_otg_state state = OTG_STATE_UNDEFINED;
419 u8 fsm = omap_readw(OTG_TEST) & 0x0ff;
420 unsigned extra = 0;
421
422 switch (fsm) {
423
424 /* default-b */
425 case 0x0:
426 state = OTG_STATE_B_IDLE;
427 break;
428 case 0x3:
429 case 0x7:
430 extra = 1;
431 case 0x1:
432 state = OTG_STATE_B_PERIPHERAL;
433 break;
434 case 0x11:
435 state = OTG_STATE_B_SRP_INIT;
436 break;
437
438 /* extra dual-role default-b states */
439 case 0x12:
440 case 0x13:
441 case 0x16:
442 extra = 1;
443 case 0x17:
444 state = OTG_STATE_B_WAIT_ACON;
445 break;
446 case 0x34:
447 state = OTG_STATE_B_HOST;
448 break;
449
450 /* default-a */
451 case 0x36:
452 state = OTG_STATE_A_IDLE;
453 break;
454 case 0x3c:
455 state = OTG_STATE_A_WAIT_VFALL;
456 break;
457 case 0x7d:
458 state = OTG_STATE_A_VBUS_ERR;
459 break;
460 case 0x9e:
461 case 0x9f:
462 extra = 1;
463 case 0x89:
464 state = OTG_STATE_A_PERIPHERAL;
465 break;
466 case 0xb7:
467 state = OTG_STATE_A_WAIT_VRISE;
468 break;
469 case 0xb8:
470 state = OTG_STATE_A_WAIT_BCON;
471 break;
472 case 0xb9:
473 state = OTG_STATE_A_HOST;
474 break;
475 case 0xba:
476 state = OTG_STATE_A_SUSPEND;
477 break;
478 default:
479 break;
480 }
481 if (isp->phy.state == state && !extra)
482 return;
483 pr_debug("otg: %s FSM %s/%02x, %s, %06x\n", tag,
484 otg_state_string(state), fsm, state_name(isp),
485 omap_readl(OTG_CTRL));
486 }
487
488 #else
489
490 static inline void check_state(struct isp1301 *isp, const char *tag) { }
491
492 #endif
493
494 /* outputs from ISP1301_INTERRUPT_SOURCE */
495 static void update_otg1(struct isp1301 *isp, u8 int_src)
496 {
497 u32 otg_ctrl;
498
499 otg_ctrl = omap_readl(OTG_CTRL) & OTG_CTRL_MASK;
500 otg_ctrl &= ~OTG_XCEIV_INPUTS;
501 otg_ctrl &= ~(OTG_ID|OTG_ASESSVLD|OTG_VBUSVLD);
502
503 if (int_src & INTR_SESS_VLD)
504 otg_ctrl |= OTG_ASESSVLD;
505 else if (isp->phy.state == OTG_STATE_A_WAIT_VFALL) {
506 a_idle(isp, "vfall");
507 otg_ctrl &= ~OTG_CTRL_BITS;
508 }
509 if (int_src & INTR_VBUS_VLD)
510 otg_ctrl |= OTG_VBUSVLD;
511 if (int_src & INTR_ID_GND) { /* default-A */
512 if (isp->phy.state == OTG_STATE_B_IDLE
513 || isp->phy.state
514 == OTG_STATE_UNDEFINED) {
515 a_idle(isp, "init");
516 return;
517 }
518 } else { /* default-B */
519 otg_ctrl |= OTG_ID;
520 if (isp->phy.state == OTG_STATE_A_IDLE
521 || isp->phy.state == OTG_STATE_UNDEFINED) {
522 b_idle(isp, "init");
523 return;
524 }
525 }
526 omap_writel(otg_ctrl, OTG_CTRL);
527 }
528
529 /* outputs from ISP1301_OTG_STATUS */
530 static void update_otg2(struct isp1301 *isp, u8 otg_status)
531 {
532 u32 otg_ctrl;
533
534 otg_ctrl = omap_readl(OTG_CTRL) & OTG_CTRL_MASK;
535 otg_ctrl &= ~OTG_XCEIV_INPUTS;
536 otg_ctrl &= ~(OTG_BSESSVLD | OTG_BSESSEND);
537 if (otg_status & OTG_B_SESS_VLD)
538 otg_ctrl |= OTG_BSESSVLD;
539 else if (otg_status & OTG_B_SESS_END)
540 otg_ctrl |= OTG_BSESSEND;
541 omap_writel(otg_ctrl, OTG_CTRL);
542 }
543
544 /* inputs going to ISP1301 */
545 static void otg_update_isp(struct isp1301 *isp)
546 {
547 u32 otg_ctrl, otg_change;
548 u8 set = OTG1_DM_PULLDOWN, clr = OTG1_DM_PULLUP;
549
550 otg_ctrl = omap_readl(OTG_CTRL);
551 otg_change = otg_ctrl ^ isp->last_otg_ctrl;
552 isp->last_otg_ctrl = otg_ctrl;
553 otg_ctrl = otg_ctrl & OTG_XCEIV_INPUTS;
554
555 switch (isp->phy.state) {
556 case OTG_STATE_B_IDLE:
557 case OTG_STATE_B_PERIPHERAL:
558 case OTG_STATE_B_SRP_INIT:
559 if (!(otg_ctrl & OTG_PULLUP)) {
560 // if (otg_ctrl & OTG_B_HNPEN) {
561 if (isp->phy.otg->gadget->b_hnp_enable) {
562 isp->phy.state = OTG_STATE_B_WAIT_ACON;
563 pr_debug(" --> b_wait_acon\n");
564 }
565 goto pulldown;
566 }
567 pullup:
568 set |= OTG1_DP_PULLUP;
569 clr |= OTG1_DP_PULLDOWN;
570 break;
571 case OTG_STATE_A_SUSPEND:
572 case OTG_STATE_A_PERIPHERAL:
573 if (otg_ctrl & OTG_PULLUP)
574 goto pullup;
575 /* FALLTHROUGH */
576 // case OTG_STATE_B_WAIT_ACON:
577 default:
578 pulldown:
579 set |= OTG1_DP_PULLDOWN;
580 clr |= OTG1_DP_PULLUP;
581 break;
582 }
583
584 # define toggle(OTG,ISP) do { \
585 if (otg_ctrl & OTG) set |= ISP; \
586 else clr |= ISP; \
587 } while (0)
588
589 if (!(isp->phy.otg->host))
590 otg_ctrl &= ~OTG_DRV_VBUS;
591
592 switch (isp->phy.state) {
593 case OTG_STATE_A_SUSPEND:
594 if (otg_ctrl & OTG_DRV_VBUS) {
595 set |= OTG1_VBUS_DRV;
596 break;
597 }
598 /* HNP failed for some reason (A_AIDL_BDIS timeout) */
599 notresponding(isp);
600
601 /* FALLTHROUGH */
602 case OTG_STATE_A_VBUS_ERR:
603 isp->phy.state = OTG_STATE_A_WAIT_VFALL;
604 pr_debug(" --> a_wait_vfall\n");
605 /* FALLTHROUGH */
606 case OTG_STATE_A_WAIT_VFALL:
607 /* FIXME usbcore thinks port power is still on ... */
608 clr |= OTG1_VBUS_DRV;
609 break;
610 case OTG_STATE_A_IDLE:
611 if (otg_ctrl & OTG_DRV_VBUS) {
612 isp->phy.state = OTG_STATE_A_WAIT_VRISE;
613 pr_debug(" --> a_wait_vrise\n");
614 }
615 /* FALLTHROUGH */
616 default:
617 toggle(OTG_DRV_VBUS, OTG1_VBUS_DRV);
618 }
619
620 toggle(OTG_PU_VBUS, OTG1_VBUS_CHRG);
621 toggle(OTG_PD_VBUS, OTG1_VBUS_DISCHRG);
622
623 # undef toggle
624
625 isp1301_set_bits(isp, ISP1301_OTG_CONTROL_1, set);
626 isp1301_clear_bits(isp, ISP1301_OTG_CONTROL_1, clr);
627
628 /* HNP switch to host or peripheral; and SRP */
629 if (otg_change & OTG_PULLUP) {
630 u32 l;
631
632 switch (isp->phy.state) {
633 case OTG_STATE_B_IDLE:
634 if (clr & OTG1_DP_PULLUP)
635 break;
636 isp->phy.state = OTG_STATE_B_PERIPHERAL;
637 pr_debug(" --> b_peripheral\n");
638 break;
639 case OTG_STATE_A_SUSPEND:
640 if (clr & OTG1_DP_PULLUP)
641 break;
642 isp->phy.state = OTG_STATE_A_PERIPHERAL;
643 pr_debug(" --> a_peripheral\n");
644 break;
645 default:
646 break;
647 }
648 l = omap_readl(OTG_CTRL);
649 l |= OTG_PULLUP;
650 omap_writel(l, OTG_CTRL);
651 }
652
653 check_state(isp, __func__);
654 dump_regs(isp, "otg->isp1301");
655 }
656
657 static irqreturn_t omap_otg_irq(int irq, void *_isp)
658 {
659 u16 otg_irq = omap_readw(OTG_IRQ_SRC);
660 u32 otg_ctrl;
661 int ret = IRQ_NONE;
662 struct isp1301 *isp = _isp;
663 struct usb_otg *otg = isp->phy.otg;
664
665 /* update ISP1301 transceiver from OTG controller */
666 if (otg_irq & OPRT_CHG) {
667 omap_writew(OPRT_CHG, OTG_IRQ_SRC);
668 isp1301_defer_work(isp, WORK_UPDATE_ISP);
669 ret = IRQ_HANDLED;
670
671 /* SRP to become b_peripheral failed */
672 } else if (otg_irq & B_SRP_TMROUT) {
673 pr_debug("otg: B_SRP_TIMEOUT, %06x\n", omap_readl(OTG_CTRL));
674 notresponding(isp);
675
676 /* gadget drivers that care should monitor all kinds of
677 * remote wakeup (SRP, normal) using their own timer
678 * to give "check cable and A-device" messages.
679 */
680 if (isp->phy.state == OTG_STATE_B_SRP_INIT)
681 b_idle(isp, "srp_timeout");
682
683 omap_writew(B_SRP_TMROUT, OTG_IRQ_SRC);
684 ret = IRQ_HANDLED;
685
686 /* HNP to become b_host failed */
687 } else if (otg_irq & B_HNP_FAIL) {
688 pr_debug("otg: %s B_HNP_FAIL, %06x\n",
689 state_name(isp), omap_readl(OTG_CTRL));
690 notresponding(isp);
691
692 otg_ctrl = omap_readl(OTG_CTRL);
693 otg_ctrl |= OTG_BUSDROP;
694 otg_ctrl &= OTG_CTRL_MASK & ~OTG_XCEIV_INPUTS;
695 omap_writel(otg_ctrl, OTG_CTRL);
696
697 /* subset of b_peripheral()... */
698 isp->phy.state = OTG_STATE_B_PERIPHERAL;
699 pr_debug(" --> b_peripheral\n");
700
701 omap_writew(B_HNP_FAIL, OTG_IRQ_SRC);
702 ret = IRQ_HANDLED;
703
704 /* detect SRP from B-device ... */
705 } else if (otg_irq & A_SRP_DETECT) {
706 pr_debug("otg: %s SRP_DETECT, %06x\n",
707 state_name(isp), omap_readl(OTG_CTRL));
708
709 isp1301_defer_work(isp, WORK_UPDATE_OTG);
710 switch (isp->phy.state) {
711 case OTG_STATE_A_IDLE:
712 if (!otg->host)
713 break;
714 isp1301_defer_work(isp, WORK_HOST_RESUME);
715 otg_ctrl = omap_readl(OTG_CTRL);
716 otg_ctrl |= OTG_A_BUSREQ;
717 otg_ctrl &= ~(OTG_BUSDROP|OTG_B_BUSREQ)
718 & ~OTG_XCEIV_INPUTS
719 & OTG_CTRL_MASK;
720 omap_writel(otg_ctrl, OTG_CTRL);
721 break;
722 default:
723 break;
724 }
725
726 omap_writew(A_SRP_DETECT, OTG_IRQ_SRC);
727 ret = IRQ_HANDLED;
728
729 /* timer expired: T(a_wait_bcon) and maybe T(a_wait_vrise)
730 * we don't track them separately
731 */
732 } else if (otg_irq & A_REQ_TMROUT) {
733 otg_ctrl = omap_readl(OTG_CTRL);
734 pr_info("otg: BCON_TMOUT from %s, %06x\n",
735 state_name(isp), otg_ctrl);
736 notresponding(isp);
737
738 otg_ctrl |= OTG_BUSDROP;
739 otg_ctrl &= ~OTG_A_BUSREQ & OTG_CTRL_MASK & ~OTG_XCEIV_INPUTS;
740 omap_writel(otg_ctrl, OTG_CTRL);
741 isp->phy.state = OTG_STATE_A_WAIT_VFALL;
742
743 omap_writew(A_REQ_TMROUT, OTG_IRQ_SRC);
744 ret = IRQ_HANDLED;
745
746 /* A-supplied voltage fell too low; overcurrent */
747 } else if (otg_irq & A_VBUS_ERR) {
748 otg_ctrl = omap_readl(OTG_CTRL);
749 printk(KERN_ERR "otg: %s, VBUS_ERR %04x ctrl %06x\n",
750 state_name(isp), otg_irq, otg_ctrl);
751
752 otg_ctrl |= OTG_BUSDROP;
753 otg_ctrl &= ~OTG_A_BUSREQ & OTG_CTRL_MASK & ~OTG_XCEIV_INPUTS;
754 omap_writel(otg_ctrl, OTG_CTRL);
755 isp->phy.state = OTG_STATE_A_VBUS_ERR;
756
757 omap_writew(A_VBUS_ERR, OTG_IRQ_SRC);
758 ret = IRQ_HANDLED;
759
760 /* switch driver; the transceiver code activates it,
761 * ungating the udc clock or resuming OHCI.
762 */
763 } else if (otg_irq & DRIVER_SWITCH) {
764 int kick = 0;
765
766 otg_ctrl = omap_readl(OTG_CTRL);
767 printk(KERN_NOTICE "otg: %s, SWITCH to %s, ctrl %06x\n",
768 state_name(isp),
769 (otg_ctrl & OTG_DRIVER_SEL)
770 ? "gadget" : "host",
771 otg_ctrl);
772 isp1301_defer_work(isp, WORK_UPDATE_ISP);
773
774 /* role is peripheral */
775 if (otg_ctrl & OTG_DRIVER_SEL) {
776 switch (isp->phy.state) {
777 case OTG_STATE_A_IDLE:
778 b_idle(isp, __func__);
779 break;
780 default:
781 break;
782 }
783 isp1301_defer_work(isp, WORK_UPDATE_ISP);
784
785 /* role is host */
786 } else {
787 if (!(otg_ctrl & OTG_ID)) {
788 otg_ctrl &= OTG_CTRL_MASK & ~OTG_XCEIV_INPUTS;
789 omap_writel(otg_ctrl | OTG_A_BUSREQ, OTG_CTRL);
790 }
791
792 if (otg->host) {
793 switch (isp->phy.state) {
794 case OTG_STATE_B_WAIT_ACON:
795 isp->phy.state = OTG_STATE_B_HOST;
796 pr_debug(" --> b_host\n");
797 kick = 1;
798 break;
799 case OTG_STATE_A_WAIT_BCON:
800 isp->phy.state = OTG_STATE_A_HOST;
801 pr_debug(" --> a_host\n");
802 break;
803 case OTG_STATE_A_PERIPHERAL:
804 isp->phy.state = OTG_STATE_A_WAIT_BCON;
805 pr_debug(" --> a_wait_bcon\n");
806 break;
807 default:
808 break;
809 }
810 isp1301_defer_work(isp, WORK_HOST_RESUME);
811 }
812 }
813
814 omap_writew(DRIVER_SWITCH, OTG_IRQ_SRC);
815 ret = IRQ_HANDLED;
816
817 if (kick)
818 usb_bus_start_enum(otg->host, otg->host->otg_port);
819 }
820
821 check_state(isp, __func__);
822 return ret;
823 }
824
825 static struct platform_device *otg_dev;
826
827 static int isp1301_otg_init(struct isp1301 *isp)
828 {
829 u32 l;
830
831 if (!otg_dev)
832 return -ENODEV;
833
834 dump_regs(isp, __func__);
835 /* some of these values are board-specific... */
836 l = omap_readl(OTG_SYSCON_2);
837 l |= OTG_EN
838 /* for B-device: */
839 | SRP_GPDATA /* 9msec Bdev D+ pulse */
840 | SRP_GPDVBUS /* discharge after VBUS pulse */
841 // | (3 << 24) /* 2msec VBUS pulse */
842 /* for A-device: */
843 | (0 << 20) /* 200ms nominal A_WAIT_VRISE timer */
844 | SRP_DPW /* detect 167+ns SRP pulses */
845 | SRP_DATA | SRP_VBUS /* accept both kinds of SRP pulse */
846 ;
847 omap_writel(l, OTG_SYSCON_2);
848
849 update_otg1(isp, isp1301_get_u8(isp, ISP1301_INTERRUPT_SOURCE));
850 update_otg2(isp, isp1301_get_u8(isp, ISP1301_OTG_STATUS));
851
852 check_state(isp, __func__);
853 pr_debug("otg: %s, %s %06x\n",
854 state_name(isp), __func__, omap_readl(OTG_CTRL));
855
856 omap_writew(DRIVER_SWITCH | OPRT_CHG
857 | B_SRP_TMROUT | B_HNP_FAIL
858 | A_VBUS_ERR | A_SRP_DETECT | A_REQ_TMROUT, OTG_IRQ_EN);
859
860 l = omap_readl(OTG_SYSCON_2);
861 l |= OTG_EN;
862 omap_writel(l, OTG_SYSCON_2);
863
864 return 0;
865 }
866
867 static int otg_probe(struct platform_device *dev)
868 {
869 // struct omap_usb_config *config = dev->platform_data;
870
871 otg_dev = dev;
872 return 0;
873 }
874
875 static int otg_remove(struct platform_device *dev)
876 {
877 otg_dev = NULL;
878 return 0;
879 }
880
881 static struct platform_driver omap_otg_driver = {
882 .probe = otg_probe,
883 .remove = otg_remove,
884 .driver = {
885 .owner = THIS_MODULE,
886 .name = "omap_otg",
887 },
888 };
889
890 static int otg_bind(struct isp1301 *isp)
891 {
892 int status;
893
894 if (otg_dev)
895 return -EBUSY;
896
897 status = platform_driver_register(&omap_otg_driver);
898 if (status < 0)
899 return status;
900
901 if (otg_dev)
902 status = request_irq(otg_dev->resource[1].start, omap_otg_irq,
903 0, DRIVER_NAME, isp);
904 else
905 status = -ENODEV;
906
907 if (status < 0)
908 platform_driver_unregister(&omap_otg_driver);
909 return status;
910 }
911
912 static void otg_unbind(struct isp1301 *isp)
913 {
914 if (!otg_dev)
915 return;
916 free_irq(otg_dev->resource[1].start, isp);
917 }
918
919 #else
920
921 /* OTG controller isn't clocked */
922
923 #endif /* CONFIG_USB_OTG */
924
925 /*-------------------------------------------------------------------------*/
926
927 static void b_peripheral(struct isp1301 *isp)
928 {
929 u32 l;
930
931 l = omap_readl(OTG_CTRL) & OTG_XCEIV_OUTPUTS;
932 omap_writel(l, OTG_CTRL);
933
934 usb_gadget_vbus_connect(isp->phy.otg->gadget);
935
936 #ifdef CONFIG_USB_OTG
937 enable_vbus_draw(isp, 8);
938 otg_update_isp(isp);
939 #else
940 enable_vbus_draw(isp, 100);
941 /* UDC driver just set OTG_BSESSVLD */
942 isp1301_set_bits(isp, ISP1301_OTG_CONTROL_1, OTG1_DP_PULLUP);
943 isp1301_clear_bits(isp, ISP1301_OTG_CONTROL_1, OTG1_DP_PULLDOWN);
944 isp->phy.state = OTG_STATE_B_PERIPHERAL;
945 pr_debug(" --> b_peripheral\n");
946 dump_regs(isp, "2periph");
947 #endif
948 }
949
950 static void isp_update_otg(struct isp1301 *isp, u8 stat)
951 {
952 struct usb_otg *otg = isp->phy.otg;
953 u8 isp_stat, isp_bstat;
954 enum usb_otg_state state = isp->phy.state;
955
956 if (stat & INTR_BDIS_ACON)
957 pr_debug("OTG: BDIS_ACON, %s\n", state_name(isp));
958
959 /* start certain state transitions right away */
960 isp_stat = isp1301_get_u8(isp, ISP1301_INTERRUPT_SOURCE);
961 if (isp_stat & INTR_ID_GND) {
962 if (otg->default_a) {
963 switch (state) {
964 case OTG_STATE_B_IDLE:
965 a_idle(isp, "idle");
966 /* FALLTHROUGH */
967 case OTG_STATE_A_IDLE:
968 enable_vbus_source(isp);
969 /* FALLTHROUGH */
970 case OTG_STATE_A_WAIT_VRISE:
971 /* we skip over OTG_STATE_A_WAIT_BCON, since
972 * the HC will transition to A_HOST (or
973 * A_SUSPEND!) without our noticing except
974 * when HNP is used.
975 */
976 if (isp_stat & INTR_VBUS_VLD)
977 isp->phy.state = OTG_STATE_A_HOST;
978 break;
979 case OTG_STATE_A_WAIT_VFALL:
980 if (!(isp_stat & INTR_SESS_VLD))
981 a_idle(isp, "vfell");
982 break;
983 default:
984 if (!(isp_stat & INTR_VBUS_VLD))
985 isp->phy.state = OTG_STATE_A_VBUS_ERR;
986 break;
987 }
988 isp_bstat = isp1301_get_u8(isp, ISP1301_OTG_STATUS);
989 } else {
990 switch (state) {
991 case OTG_STATE_B_PERIPHERAL:
992 case OTG_STATE_B_HOST:
993 case OTG_STATE_B_WAIT_ACON:
994 usb_gadget_vbus_disconnect(otg->gadget);
995 break;
996 default:
997 break;
998 }
999 if (state != OTG_STATE_A_IDLE)
1000 a_idle(isp, "id");
1001 if (otg->host && state == OTG_STATE_A_IDLE)
1002 isp1301_defer_work(isp, WORK_HOST_RESUME);
1003 isp_bstat = 0;
1004 }
1005 } else {
1006 u32 l;
1007
1008 /* if user unplugged mini-A end of cable,
1009 * don't bypass A_WAIT_VFALL.
1010 */
1011 if (otg->default_a) {
1012 switch (state) {
1013 default:
1014 isp->phy.state = OTG_STATE_A_WAIT_VFALL;
1015 break;
1016 case OTG_STATE_A_WAIT_VFALL:
1017 state = OTG_STATE_A_IDLE;
1018 /* khubd may take a while to notice and
1019 * handle this disconnect, so don't go
1020 * to B_IDLE quite yet.
1021 */
1022 break;
1023 case OTG_STATE_A_IDLE:
1024 host_suspend(isp);
1025 isp1301_clear_bits(isp, ISP1301_MODE_CONTROL_1,
1026 MC1_BDIS_ACON_EN);
1027 isp->phy.state = OTG_STATE_B_IDLE;
1028 l = omap_readl(OTG_CTRL) & OTG_CTRL_MASK;
1029 l &= ~OTG_CTRL_BITS;
1030 omap_writel(l, OTG_CTRL);
1031 break;
1032 case OTG_STATE_B_IDLE:
1033 break;
1034 }
1035 }
1036 isp_bstat = isp1301_get_u8(isp, ISP1301_OTG_STATUS);
1037
1038 switch (isp->phy.state) {
1039 case OTG_STATE_B_PERIPHERAL:
1040 case OTG_STATE_B_WAIT_ACON:
1041 case OTG_STATE_B_HOST:
1042 if (likely(isp_bstat & OTG_B_SESS_VLD))
1043 break;
1044 enable_vbus_draw(isp, 0);
1045 #ifndef CONFIG_USB_OTG
1046 /* UDC driver will clear OTG_BSESSVLD */
1047 isp1301_set_bits(isp, ISP1301_OTG_CONTROL_1,
1048 OTG1_DP_PULLDOWN);
1049 isp1301_clear_bits(isp, ISP1301_OTG_CONTROL_1,
1050 OTG1_DP_PULLUP);
1051 dump_regs(isp, __func__);
1052 #endif
1053 /* FALLTHROUGH */
1054 case OTG_STATE_B_SRP_INIT:
1055 b_idle(isp, __func__);
1056 l = omap_readl(OTG_CTRL) & OTG_XCEIV_OUTPUTS;
1057 omap_writel(l, OTG_CTRL);
1058 /* FALLTHROUGH */
1059 case OTG_STATE_B_IDLE:
1060 if (otg->gadget && (isp_bstat & OTG_B_SESS_VLD)) {
1061 #ifdef CONFIG_USB_OTG
1062 update_otg1(isp, isp_stat);
1063 update_otg2(isp, isp_bstat);
1064 #endif
1065 b_peripheral(isp);
1066 } else if (!(isp_stat & (INTR_VBUS_VLD|INTR_SESS_VLD)))
1067 isp_bstat |= OTG_B_SESS_END;
1068 break;
1069 case OTG_STATE_A_WAIT_VFALL:
1070 break;
1071 default:
1072 pr_debug("otg: unsupported b-device %s\n",
1073 state_name(isp));
1074 break;
1075 }
1076 }
1077
1078 if (state != isp->phy.state)
1079 pr_debug(" isp, %s -> %s\n",
1080 otg_state_string(state), state_name(isp));
1081
1082 #ifdef CONFIG_USB_OTG
1083 /* update the OTG controller state to match the isp1301; may
1084 * trigger OPRT_CHG irqs for changes going to the isp1301.
1085 */
1086 update_otg1(isp, isp_stat);
1087 update_otg2(isp, isp_bstat);
1088 check_state(isp, __func__);
1089 #endif
1090
1091 dump_regs(isp, "isp1301->otg");
1092 }
1093
1094 /*-------------------------------------------------------------------------*/
1095
1096 static u8 isp1301_clear_latch(struct isp1301 *isp)
1097 {
1098 u8 latch = isp1301_get_u8(isp, ISP1301_INTERRUPT_LATCH);
1099 isp1301_clear_bits(isp, ISP1301_INTERRUPT_LATCH, latch);
1100 return latch;
1101 }
1102
1103 static void
1104 isp1301_work(struct work_struct *work)
1105 {
1106 struct isp1301 *isp = container_of(work, struct isp1301, work);
1107 int stop;
1108
1109 /* implicit lock: we're the only task using this device */
1110 isp->working = 1;
1111 do {
1112 stop = test_bit(WORK_STOP, &isp->todo);
1113
1114 #ifdef CONFIG_USB_OTG
1115 /* transfer state from otg engine to isp1301 */
1116 if (test_and_clear_bit(WORK_UPDATE_ISP, &isp->todo)) {
1117 otg_update_isp(isp);
1118 put_device(&isp->client->dev);
1119 }
1120 #endif
1121 /* transfer state from isp1301 to otg engine */
1122 if (test_and_clear_bit(WORK_UPDATE_OTG, &isp->todo)) {
1123 u8 stat = isp1301_clear_latch(isp);
1124
1125 isp_update_otg(isp, stat);
1126 put_device(&isp->client->dev);
1127 }
1128
1129 if (test_and_clear_bit(WORK_HOST_RESUME, &isp->todo)) {
1130 u32 otg_ctrl;
1131
1132 /*
1133 * skip A_WAIT_VRISE; hc transitions invisibly
1134 * skip A_WAIT_BCON; same.
1135 */
1136 switch (isp->phy.state) {
1137 case OTG_STATE_A_WAIT_BCON:
1138 case OTG_STATE_A_WAIT_VRISE:
1139 isp->phy.state = OTG_STATE_A_HOST;
1140 pr_debug(" --> a_host\n");
1141 otg_ctrl = omap_readl(OTG_CTRL);
1142 otg_ctrl |= OTG_A_BUSREQ;
1143 otg_ctrl &= ~(OTG_BUSDROP|OTG_B_BUSREQ)
1144 & OTG_CTRL_MASK;
1145 omap_writel(otg_ctrl, OTG_CTRL);
1146 break;
1147 case OTG_STATE_B_WAIT_ACON:
1148 isp->phy.state = OTG_STATE_B_HOST;
1149 pr_debug(" --> b_host (acon)\n");
1150 break;
1151 case OTG_STATE_B_HOST:
1152 case OTG_STATE_B_IDLE:
1153 case OTG_STATE_A_IDLE:
1154 break;
1155 default:
1156 pr_debug(" host resume in %s\n",
1157 state_name(isp));
1158 }
1159 host_resume(isp);
1160 // mdelay(10);
1161 put_device(&isp->client->dev);
1162 }
1163
1164 if (test_and_clear_bit(WORK_TIMER, &isp->todo)) {
1165 #ifdef VERBOSE
1166 dump_regs(isp, "timer");
1167 if (!stop)
1168 mod_timer(&isp->timer, jiffies + TIMER_JIFFIES);
1169 #endif
1170 put_device(&isp->client->dev);
1171 }
1172
1173 if (isp->todo)
1174 dev_vdbg(&isp->client->dev,
1175 "work done, todo = 0x%lx\n",
1176 isp->todo);
1177 if (stop) {
1178 dev_dbg(&isp->client->dev, "stop\n");
1179 break;
1180 }
1181 } while (isp->todo);
1182 isp->working = 0;
1183 }
1184
1185 static irqreturn_t isp1301_irq(int irq, void *isp)
1186 {
1187 isp1301_defer_work(isp, WORK_UPDATE_OTG);
1188 return IRQ_HANDLED;
1189 }
1190
1191 static void isp1301_timer(unsigned long _isp)
1192 {
1193 isp1301_defer_work((void *)_isp, WORK_TIMER);
1194 }
1195
1196 /*-------------------------------------------------------------------------*/
1197
1198 static void isp1301_release(struct device *dev)
1199 {
1200 struct isp1301 *isp;
1201
1202 isp = dev_get_drvdata(dev);
1203
1204 /* FIXME -- not with a "new style" driver, it doesn't!! */
1205
1206 /* ugly -- i2c hijacks our memory hook to wait_for_completion() */
1207 if (isp->i2c_release)
1208 isp->i2c_release(dev);
1209 kfree(isp->phy.otg);
1210 kfree (isp);
1211 }
1212
1213 static struct isp1301 *the_transceiver;
1214
1215 static int __exit isp1301_remove(struct i2c_client *i2c)
1216 {
1217 struct isp1301 *isp;
1218
1219 isp = i2c_get_clientdata(i2c);
1220
1221 isp1301_clear_bits(isp, ISP1301_INTERRUPT_FALLING, ~0);
1222 isp1301_clear_bits(isp, ISP1301_INTERRUPT_RISING, ~0);
1223 free_irq(i2c->irq, isp);
1224 #ifdef CONFIG_USB_OTG
1225 otg_unbind(isp);
1226 #endif
1227 if (machine_is_omap_h2())
1228 gpio_free(2);
1229
1230 isp->timer.data = 0;
1231 set_bit(WORK_STOP, &isp->todo);
1232 del_timer_sync(&isp->timer);
1233 flush_work_sync(&isp->work);
1234
1235 put_device(&i2c->dev);
1236 the_transceiver = NULL;
1237
1238 return 0;
1239 }
1240
1241 /*-------------------------------------------------------------------------*/
1242
1243 /* NOTE: three modes are possible here, only one of which
1244 * will be standards-conformant on any given system:
1245 *
1246 * - OTG mode (dual-role), required if there's a Mini-AB connector
1247 * - HOST mode, for when there's one or more A (host) connectors
1248 * - DEVICE mode, for when there's a B/Mini-B (device) connector
1249 *
1250 * As a rule, you won't have an isp1301 chip unless it's there to
1251 * support the OTG mode. Other modes help testing USB controllers
1252 * in isolation from (full) OTG support, or maybe so later board
1253 * revisions can help to support those feature.
1254 */
1255
1256 #ifdef CONFIG_USB_OTG
1257
1258 static int isp1301_otg_enable(struct isp1301 *isp)
1259 {
1260 power_up(isp);
1261 isp1301_otg_init(isp);
1262
1263 /* NOTE: since we don't change this, this provides
1264 * a few more interrupts than are strictly needed.
1265 */
1266 isp1301_set_bits(isp, ISP1301_INTERRUPT_RISING,
1267 INTR_VBUS_VLD | INTR_SESS_VLD | INTR_ID_GND);
1268 isp1301_set_bits(isp, ISP1301_INTERRUPT_FALLING,
1269 INTR_VBUS_VLD | INTR_SESS_VLD | INTR_ID_GND);
1270
1271 dev_info(&isp->client->dev, "ready for dual-role USB ...\n");
1272
1273 return 0;
1274 }
1275
1276 #endif
1277
1278 /* add or disable the host device+driver */
1279 static int
1280 isp1301_set_host(struct usb_otg *otg, struct usb_bus *host)
1281 {
1282 struct isp1301 *isp = container_of(otg->phy, struct isp1301, phy);
1283
1284 if (!otg || isp != the_transceiver)
1285 return -ENODEV;
1286
1287 if (!host) {
1288 omap_writew(0, OTG_IRQ_EN);
1289 power_down(isp);
1290 otg->host = NULL;
1291 return 0;
1292 }
1293
1294 #ifdef CONFIG_USB_OTG
1295 otg->host = host;
1296 dev_dbg(&isp->client->dev, "registered host\n");
1297 host_suspend(isp);
1298 if (otg->gadget)
1299 return isp1301_otg_enable(isp);
1300 return 0;
1301
1302 #elif !defined(CONFIG_USB_GADGET_OMAP)
1303 // FIXME update its refcount
1304 otg->host = host;
1305
1306 power_up(isp);
1307
1308 if (machine_is_omap_h2())
1309 isp1301_set_bits(isp, ISP1301_MODE_CONTROL_1, MC1_DAT_SE0);
1310
1311 dev_info(&isp->client->dev, "A-Host sessions ok\n");
1312 isp1301_set_bits(isp, ISP1301_INTERRUPT_RISING,
1313 INTR_ID_GND);
1314 isp1301_set_bits(isp, ISP1301_INTERRUPT_FALLING,
1315 INTR_ID_GND);
1316
1317 /* If this has a Mini-AB connector, this mode is highly
1318 * nonstandard ... but can be handy for testing, especially with
1319 * the Mini-A end of an OTG cable. (Or something nonstandard
1320 * like MiniB-to-StandardB, maybe built with a gender mender.)
1321 */
1322 isp1301_set_bits(isp, ISP1301_OTG_CONTROL_1, OTG1_VBUS_DRV);
1323
1324 dump_regs(isp, __func__);
1325
1326 return 0;
1327
1328 #else
1329 dev_dbg(&isp->client->dev, "host sessions not allowed\n");
1330 return -EINVAL;
1331 #endif
1332
1333 }
1334
1335 static int
1336 isp1301_set_peripheral(struct usb_otg *otg, struct usb_gadget *gadget)
1337 {
1338 struct isp1301 *isp = container_of(otg->phy, struct isp1301, phy);
1339 #ifndef CONFIG_USB_OTG
1340 u32 l;
1341 #endif
1342
1343 if (!otg || isp != the_transceiver)
1344 return -ENODEV;
1345
1346 if (!gadget) {
1347 omap_writew(0, OTG_IRQ_EN);
1348 if (!otg->default_a)
1349 enable_vbus_draw(isp, 0);
1350 usb_gadget_vbus_disconnect(otg->gadget);
1351 otg->gadget = NULL;
1352 power_down(isp);
1353 return 0;
1354 }
1355
1356 #ifdef CONFIG_USB_OTG
1357 otg->gadget = gadget;
1358 dev_dbg(&isp->client->dev, "registered gadget\n");
1359 /* gadget driver may be suspended until vbus_connect () */
1360 if (otg->host)
1361 return isp1301_otg_enable(isp);
1362 return 0;
1363
1364 #elif !defined(CONFIG_USB_OHCI_HCD) && !defined(CONFIG_USB_OHCI_HCD_MODULE)
1365 otg->gadget = gadget;
1366 // FIXME update its refcount
1367
1368 l = omap_readl(OTG_CTRL) & OTG_CTRL_MASK;
1369 l &= ~(OTG_XCEIV_OUTPUTS|OTG_CTRL_BITS);
1370 l |= OTG_ID;
1371 omap_writel(l, OTG_CTRL);
1372
1373 power_up(isp);
1374 isp->phy.state = OTG_STATE_B_IDLE;
1375
1376 if (machine_is_omap_h2() || machine_is_omap_h3())
1377 isp1301_set_bits(isp, ISP1301_MODE_CONTROL_1, MC1_DAT_SE0);
1378
1379 isp1301_set_bits(isp, ISP1301_INTERRUPT_RISING,
1380 INTR_SESS_VLD);
1381 isp1301_set_bits(isp, ISP1301_INTERRUPT_FALLING,
1382 INTR_VBUS_VLD);
1383 dev_info(&isp->client->dev, "B-Peripheral sessions ok\n");
1384 dump_regs(isp, __func__);
1385
1386 /* If this has a Mini-AB connector, this mode is highly
1387 * nonstandard ... but can be handy for testing, so long
1388 * as you don't plug a Mini-A cable into the jack.
1389 */
1390 if (isp1301_get_u8(isp, ISP1301_INTERRUPT_SOURCE) & INTR_VBUS_VLD)
1391 b_peripheral(isp);
1392
1393 return 0;
1394
1395 #else
1396 dev_dbg(&isp->client->dev, "peripheral sessions not allowed\n");
1397 return -EINVAL;
1398 #endif
1399 }
1400
1401
1402 /*-------------------------------------------------------------------------*/
1403
1404 static int
1405 isp1301_set_power(struct usb_phy *dev, unsigned mA)
1406 {
1407 if (!the_transceiver)
1408 return -ENODEV;
1409 if (dev->state == OTG_STATE_B_PERIPHERAL)
1410 enable_vbus_draw(the_transceiver, mA);
1411 return 0;
1412 }
1413
1414 static int
1415 isp1301_start_srp(struct usb_otg *otg)
1416 {
1417 struct isp1301 *isp = container_of(otg->phy, struct isp1301, phy);
1418 u32 otg_ctrl;
1419
1420 if (!otg || isp != the_transceiver
1421 || isp->phy.state != OTG_STATE_B_IDLE)
1422 return -ENODEV;
1423
1424 otg_ctrl = omap_readl(OTG_CTRL);
1425 if (!(otg_ctrl & OTG_BSESSEND))
1426 return -EINVAL;
1427
1428 otg_ctrl |= OTG_B_BUSREQ;
1429 otg_ctrl &= ~OTG_A_BUSREQ & OTG_CTRL_MASK;
1430 omap_writel(otg_ctrl, OTG_CTRL);
1431 isp->phy.state = OTG_STATE_B_SRP_INIT;
1432
1433 pr_debug("otg: SRP, %s ... %06x\n", state_name(isp),
1434 omap_readl(OTG_CTRL));
1435 #ifdef CONFIG_USB_OTG
1436 check_state(isp, __func__);
1437 #endif
1438 return 0;
1439 }
1440
1441 static int
1442 isp1301_start_hnp(struct usb_otg *otg)
1443 {
1444 #ifdef CONFIG_USB_OTG
1445 struct isp1301 *isp = container_of(otg->phy, struct isp1301, phy);
1446 u32 l;
1447
1448 if (!otg || isp != the_transceiver)
1449 return -ENODEV;
1450 if (otg->default_a && (otg->host == NULL || !otg->host->b_hnp_enable))
1451 return -ENOTCONN;
1452 if (!otg->default_a && (otg->gadget == NULL
1453 || !otg->gadget->b_hnp_enable))
1454 return -ENOTCONN;
1455
1456 /* We want hardware to manage most HNP protocol timings.
1457 * So do this part as early as possible...
1458 */
1459 switch (isp->phy.state) {
1460 case OTG_STATE_B_HOST:
1461 isp->phy.state = OTG_STATE_B_PERIPHERAL;
1462 /* caller will suspend next */
1463 break;
1464 case OTG_STATE_A_HOST:
1465 #if 0
1466 /* autoconnect mode avoids irq latency bugs */
1467 isp1301_set_bits(isp, ISP1301_MODE_CONTROL_1,
1468 MC1_BDIS_ACON_EN);
1469 #endif
1470 /* caller must suspend then clear A_BUSREQ */
1471 usb_gadget_vbus_connect(otg->gadget);
1472 l = omap_readl(OTG_CTRL);
1473 l |= OTG_A_SETB_HNPEN;
1474 omap_writel(l, OTG_CTRL);
1475
1476 break;
1477 case OTG_STATE_A_PERIPHERAL:
1478 /* initiated by B-Host suspend */
1479 break;
1480 default:
1481 return -EILSEQ;
1482 }
1483 pr_debug("otg: HNP %s, %06x ...\n",
1484 state_name(isp), omap_readl(OTG_CTRL));
1485 check_state(isp, __func__);
1486 return 0;
1487 #else
1488 /* srp-only */
1489 return -EINVAL;
1490 #endif
1491 }
1492
1493 /*-------------------------------------------------------------------------*/
1494
1495 static int __devinit
1496 isp1301_probe(struct i2c_client *i2c, const struct i2c_device_id *id)
1497 {
1498 int status;
1499 struct isp1301 *isp;
1500
1501 if (the_transceiver)
1502 return 0;
1503
1504 isp = kzalloc(sizeof *isp, GFP_KERNEL);
1505 if (!isp)
1506 return 0;
1507
1508 isp->phy.otg = kzalloc(sizeof *isp->phy.otg, GFP_KERNEL);
1509 if (!isp->phy.otg) {
1510 kfree(isp);
1511 return 0;
1512 }
1513
1514 INIT_WORK(&isp->work, isp1301_work);
1515 init_timer(&isp->timer);
1516 isp->timer.function = isp1301_timer;
1517 isp->timer.data = (unsigned long) isp;
1518
1519 i2c_set_clientdata(i2c, isp);
1520 isp->client = i2c;
1521
1522 /* verify the chip (shouldn't be necessary) */
1523 status = isp1301_get_u16(isp, ISP1301_VENDOR_ID);
1524 if (status != I2C_VENDOR_ID_PHILIPS) {
1525 dev_dbg(&i2c->dev, "not philips id: %d\n", status);
1526 goto fail;
1527 }
1528 status = isp1301_get_u16(isp, ISP1301_PRODUCT_ID);
1529 if (status != I2C_PRODUCT_ID_PHILIPS_1301) {
1530 dev_dbg(&i2c->dev, "not isp1301, %d\n", status);
1531 goto fail;
1532 }
1533 isp->i2c_release = i2c->dev.release;
1534 i2c->dev.release = isp1301_release;
1535
1536 /* initial development used chiprev 2.00 */
1537 status = i2c_smbus_read_word_data(i2c, ISP1301_BCD_DEVICE);
1538 dev_info(&i2c->dev, "chiprev %x.%02x, driver " DRIVER_VERSION "\n",
1539 status >> 8, status & 0xff);
1540
1541 /* make like power-on reset */
1542 isp1301_clear_bits(isp, ISP1301_MODE_CONTROL_1, MC1_MASK);
1543
1544 isp1301_set_bits(isp, ISP1301_MODE_CONTROL_2, MC2_BI_DI);
1545 isp1301_clear_bits(isp, ISP1301_MODE_CONTROL_2, ~MC2_BI_DI);
1546
1547 isp1301_set_bits(isp, ISP1301_OTG_CONTROL_1,
1548 OTG1_DM_PULLDOWN | OTG1_DP_PULLDOWN);
1549 isp1301_clear_bits(isp, ISP1301_OTG_CONTROL_1,
1550 ~(OTG1_DM_PULLDOWN | OTG1_DP_PULLDOWN));
1551
1552 isp1301_clear_bits(isp, ISP1301_INTERRUPT_LATCH, ~0);
1553 isp1301_clear_bits(isp, ISP1301_INTERRUPT_FALLING, ~0);
1554 isp1301_clear_bits(isp, ISP1301_INTERRUPT_RISING, ~0);
1555
1556 #ifdef CONFIG_USB_OTG
1557 status = otg_bind(isp);
1558 if (status < 0) {
1559 dev_dbg(&i2c->dev, "can't bind OTG\n");
1560 goto fail;
1561 }
1562 #endif
1563
1564 if (machine_is_omap_h2()) {
1565 /* full speed signaling by default */
1566 isp1301_set_bits(isp, ISP1301_MODE_CONTROL_1,
1567 MC1_SPEED);
1568 isp1301_set_bits(isp, ISP1301_MODE_CONTROL_2,
1569 MC2_SPD_SUSP_CTRL);
1570
1571 /* IRQ wired at M14 */
1572 omap_cfg_reg(M14_1510_GPIO2);
1573 if (gpio_request(2, "isp1301") == 0)
1574 gpio_direction_input(2);
1575 isp->irq_type = IRQF_TRIGGER_FALLING;
1576 }
1577
1578 isp->irq_type |= IRQF_SAMPLE_RANDOM;
1579 status = request_irq(i2c->irq, isp1301_irq,
1580 isp->irq_type, DRIVER_NAME, isp);
1581 if (status < 0) {
1582 dev_dbg(&i2c->dev, "can't get IRQ %d, err %d\n",
1583 i2c->irq, status);
1584 goto fail;
1585 }
1586
1587 isp->phy.dev = &i2c->dev;
1588 isp->phy.label = DRIVER_NAME;
1589 isp->phy.set_power = isp1301_set_power,
1590
1591 isp->phy.otg->phy = &isp->phy;
1592 isp->phy.otg->set_host = isp1301_set_host,
1593 isp->phy.otg->set_peripheral = isp1301_set_peripheral,
1594 isp->phy.otg->start_srp = isp1301_start_srp,
1595 isp->phy.otg->start_hnp = isp1301_start_hnp,
1596
1597 enable_vbus_draw(isp, 0);
1598 power_down(isp);
1599 the_transceiver = isp;
1600
1601 #ifdef CONFIG_USB_OTG
1602 update_otg1(isp, isp1301_get_u8(isp, ISP1301_INTERRUPT_SOURCE));
1603 update_otg2(isp, isp1301_get_u8(isp, ISP1301_OTG_STATUS));
1604 #endif
1605
1606 dump_regs(isp, __func__);
1607
1608 #ifdef VERBOSE
1609 mod_timer(&isp->timer, jiffies + TIMER_JIFFIES);
1610 dev_dbg(&i2c->dev, "scheduled timer, %d min\n", TIMER_MINUTES);
1611 #endif
1612
1613 status = usb_set_transceiver(&isp->phy);
1614 if (status < 0)
1615 dev_err(&i2c->dev, "can't register transceiver, %d\n",
1616 status);
1617
1618 return 0;
1619
1620 fail:
1621 kfree(isp->phy.otg);
1622 kfree(isp);
1623 return -ENODEV;
1624 }
1625
1626 static const struct i2c_device_id isp1301_id[] = {
1627 { "isp1301_omap", 0 },
1628 { }
1629 };
1630 MODULE_DEVICE_TABLE(i2c, isp1301_id);
1631
1632 static struct i2c_driver isp1301_driver = {
1633 .driver = {
1634 .name = "isp1301_omap",
1635 },
1636 .probe = isp1301_probe,
1637 .remove = __exit_p(isp1301_remove),
1638 .id_table = isp1301_id,
1639 };
1640
1641 /*-------------------------------------------------------------------------*/
1642
1643 static int __init isp_init(void)
1644 {
1645 return i2c_add_driver(&isp1301_driver);
1646 }
1647 subsys_initcall(isp_init);
1648
1649 static void __exit isp_exit(void)
1650 {
1651 if (the_transceiver)
1652 usb_set_transceiver(NULL);
1653 i2c_del_driver(&isp1301_driver);
1654 }
1655 module_exit(isp_exit);
1656
Linux 2.6 libata-dev (mirror)