2 * Toshiba RBTX4938 specific interrupt handlers
3 * Copyright (C) 2000-2001 Toshiba Corporation
5 * 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the
6 * terms of the GNU General Public License version 2. This program is
7 * licensed "as is" without any warranty of any kind, whether express
10 * Support for TX4938 in 2.6 - Manish Lachwani (mlachwani@mvista.com)
14 * MIPS_CPU_IRQ_BASE+00 Software 0
15 * MIPS_CPU_IRQ_BASE+01 Software 1
16 * MIPS_CPU_IRQ_BASE+02 Cascade TX4938-CP0
17 * MIPS_CPU_IRQ_BASE+03 Multiplexed -- do not use
18 * MIPS_CPU_IRQ_BASE+04 Multiplexed -- do not use
19 * MIPS_CPU_IRQ_BASE+05 Multiplexed -- do not use
20 * MIPS_CPU_IRQ_BASE+06 Multiplexed -- do not use
21 * MIPS_CPU_IRQ_BASE+07 CPU TIMER
25 * TXX9_IRQ_BASE+02 Cascade RBTX4938-IOC
26 * TXX9_IRQ_BASE+03 RBTX4938 RTL-8019AS Ethernet
28 * TXX9_IRQ_BASE+05 TX4938 ETH1
29 * TXX9_IRQ_BASE+06 TX4938 ETH0
31 * TXX9_IRQ_BASE+08 TX4938 SIO 0
32 * TXX9_IRQ_BASE+09 TX4938 SIO 1
33 * TXX9_IRQ_BASE+10 TX4938 DMA0
34 * TXX9_IRQ_BASE+11 TX4938 DMA1
35 * TXX9_IRQ_BASE+12 TX4938 DMA2
36 * TXX9_IRQ_BASE+13 TX4938 DMA3
39 * TXX9_IRQ_BASE+16 TX4938 PCIC
40 * TXX9_IRQ_BASE+17 TX4938 TMR0
41 * TXX9_IRQ_BASE+18 TX4938 TMR1
42 * TXX9_IRQ_BASE+19 TX4938 TMR2
45 * TXX9_IRQ_BASE+22 TX4938 PCIERR
54 * TXX9_IRQ_BASE+31 TX4938 SPI
56 * RBTX4938_IRQ_IOC+00 PCI-D
57 * RBTX4938_IRQ_IOC+01 PCI-C
58 * RBTX4938_IRQ_IOC+02 PCI-B
59 * RBTX4938_IRQ_IOC+03 PCI-A
60 * RBTX4938_IRQ_IOC+04 RTC
61 * RBTX4938_IRQ_IOC+05 ATA
62 * RBTX4938_IRQ_IOC+06 MODEM
63 * RBTX4938_IRQ_IOC+07 SWINT
65 #include <linux/init.h>
66 #include <linux/interrupt.h>
67 #include <linux/irq.h>
68 #include <asm/mipsregs.h>
69 #include <asm/txx9/generic.h>
70 #include <asm/txx9/rbtx4938.h>
72 static int toshiba_rbtx4938_irq_nested(int sw_irq
)
76 level3
= readb(rbtx4938_imstat_addr
);
77 if (unlikely(!level3
))
79 /* must use fls so onboard ATA has priority */
80 return RBTX4938_IRQ_IOC
+ __fls8(level3
);
83 static void toshiba_rbtx4938_irq_ioc_enable(struct irq_data
*d
)
87 v
= readb(rbtx4938_imask_addr
);
88 v
|= (1 << (d
->irq
- RBTX4938_IRQ_IOC
));
89 writeb(v
, rbtx4938_imask_addr
);
93 static void toshiba_rbtx4938_irq_ioc_disable(struct irq_data
*d
)
97 v
= readb(rbtx4938_imask_addr
);
98 v
&= ~(1 << (d
->irq
- RBTX4938_IRQ_IOC
));
99 writeb(v
, rbtx4938_imask_addr
);
103 #define TOSHIBA_RBTX4938_IOC_NAME "RBTX4938-IOC"
104 static struct irq_chip toshiba_rbtx4938_irq_ioc_type
= {
105 .name
= TOSHIBA_RBTX4938_IOC_NAME
,
106 .irq_mask
= toshiba_rbtx4938_irq_ioc_disable
,
107 .irq_unmask
= toshiba_rbtx4938_irq_ioc_enable
,
110 static int rbtx4938_irq_dispatch(int pending
)
114 if (pending
& STATUSF_IP7
)
115 irq
= MIPS_CPU_IRQ_BASE
+ 7;
116 else if (pending
& STATUSF_IP2
) {
118 if (irq
== RBTX4938_IRQ_IOCINT
)
119 irq
= toshiba_rbtx4938_irq_nested(irq
);
120 } else if (pending
& STATUSF_IP1
)
121 irq
= MIPS_CPU_IRQ_BASE
+ 0;
122 else if (pending
& STATUSF_IP0
)
123 irq
= MIPS_CPU_IRQ_BASE
+ 1;
129 static void __init
toshiba_rbtx4938_irq_ioc_init(void)
133 for (i
= RBTX4938_IRQ_IOC
;
134 i
< RBTX4938_IRQ_IOC
+ RBTX4938_NR_IRQ_IOC
; i
++)
135 irq_set_chip_and_handler(i
, &toshiba_rbtx4938_irq_ioc_type
,
138 irq_set_chained_handler(RBTX4938_IRQ_IOCINT
, handle_simple_irq
);
141 void __init
rbtx4938_irq_setup(void)
143 txx9_irq_dispatch
= rbtx4938_irq_dispatch
;
144 /* Now, interrupt control disabled, */
145 /* all IRC interrupts are masked, */
146 /* all IRC interrupt mode are Low Active. */
148 /* mask all IOC interrupts */
149 writeb(0, rbtx4938_imask_addr
);
151 /* clear SoftInt interrupts */
152 writeb(0, rbtx4938_softint_addr
);
154 toshiba_rbtx4938_irq_ioc_init();
155 /* Onboard 10M Ether: High Active */
156 irq_set_irq_type(RBTX4938_IRQ_ETHER
, IRQF_TRIGGER_HIGH
);