Input: i8042 - fix incorrect usage of strncpy and strncat
[linux-2.6/libata-dev.git] / drivers / input / serio / i8042-x86ia64io.h
blob5ece9f56babc50ff1d0018e0dccec9832a19444a
1 #ifndef _I8042_X86IA64IO_H
2 #define _I8042_X86IA64IO_H
4 /*
5 * This program is free software; you can redistribute it and/or modify it
6 * under the terms of the GNU General Public License version 2 as published by
7 * the Free Software Foundation.
8 */
11 * Names.
14 #define I8042_KBD_PHYS_DESC "isa0060/serio0"
15 #define I8042_AUX_PHYS_DESC "isa0060/serio1"
16 #define I8042_MUX_PHYS_DESC "isa0060/serio%d"
19 * IRQs.
22 #if defined(__ia64__)
23 # define I8042_MAP_IRQ(x) isa_irq_to_vector((x))
24 #else
25 # define I8042_MAP_IRQ(x) (x)
26 #endif
28 #define I8042_KBD_IRQ i8042_kbd_irq
29 #define I8042_AUX_IRQ i8042_aux_irq
31 static int i8042_kbd_irq;
32 static int i8042_aux_irq;
35 * Register numbers.
38 #define I8042_COMMAND_REG i8042_command_reg
39 #define I8042_STATUS_REG i8042_command_reg
40 #define I8042_DATA_REG i8042_data_reg
42 static int i8042_command_reg = 0x64;
43 static int i8042_data_reg = 0x60;
46 static inline int i8042_read_data(void)
48 return inb(I8042_DATA_REG);
51 static inline int i8042_read_status(void)
53 return inb(I8042_STATUS_REG);
56 static inline void i8042_write_data(int val)
58 outb(val, I8042_DATA_REG);
61 static inline void i8042_write_command(int val)
63 outb(val, I8042_COMMAND_REG);
66 #if defined(__i386__) || defined(__x86_64__)
68 #include <linux/dmi.h>
70 static struct dmi_system_id __initdata i8042_dmi_noloop_table[] = {
72 /* AUX LOOP command does not raise AUX IRQ */
73 .ident = "ASUS P65UP5",
74 .matches = {
75 DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
76 DMI_MATCH(DMI_BOARD_NAME, "P/I-P65UP5"),
77 DMI_MATCH(DMI_BOARD_VERSION, "REV 2.X"),
81 .ident = "Compaq Proliant 8500",
82 .matches = {
83 DMI_MATCH(DMI_SYS_VENDOR, "Compaq"),
84 DMI_MATCH(DMI_PRODUCT_NAME , "ProLiant"),
85 DMI_MATCH(DMI_PRODUCT_VERSION, "8500"),
89 .ident = "Compaq Proliant DL760",
90 .matches = {
91 DMI_MATCH(DMI_SYS_VENDOR, "Compaq"),
92 DMI_MATCH(DMI_PRODUCT_NAME , "ProLiant"),
93 DMI_MATCH(DMI_PRODUCT_VERSION, "DL760"),
97 .ident = "OQO Model 01",
98 .matches = {
99 DMI_MATCH(DMI_SYS_VENDOR, "OQO"),
100 DMI_MATCH(DMI_PRODUCT_NAME, "ZEPTO"),
101 DMI_MATCH(DMI_PRODUCT_VERSION, "00"),
105 /* AUX LOOP does not work properly */
106 .ident = "ULI EV4873",
107 .matches = {
108 DMI_MATCH(DMI_SYS_VENDOR, "ULI"),
109 DMI_MATCH(DMI_PRODUCT_NAME, "EV4873"),
110 DMI_MATCH(DMI_PRODUCT_VERSION, "5a"),
114 .ident = "Microsoft Virtual Machine",
115 .matches = {
116 DMI_MATCH(DMI_SYS_VENDOR, "Microsoft Corporation"),
117 DMI_MATCH(DMI_PRODUCT_NAME, "Virtual Machine"),
118 DMI_MATCH(DMI_PRODUCT_VERSION, "VS2005R2"),
125 * Some Fujitsu notebooks are having trouble with touchpads if
126 * active multiplexing mode is activated. Luckily they don't have
127 * external PS/2 ports so we can safely disable it.
128 * ... apparently some Toshibas don't like MUX mode either and
129 * die horrible death on reboot.
131 static struct dmi_system_id __initdata i8042_dmi_nomux_table[] = {
133 .ident = "Fujitsu Lifebook P7010/P7010D",
134 .matches = {
135 DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"),
136 DMI_MATCH(DMI_PRODUCT_NAME, "P7010"),
140 .ident = "Fujitsu Lifebook P7010",
141 .matches = {
142 DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"),
143 DMI_MATCH(DMI_PRODUCT_NAME, "0000000000"),
147 .ident = "Fujitsu Lifebook P5020D",
148 .matches = {
149 DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"),
150 DMI_MATCH(DMI_PRODUCT_NAME, "LifeBook P Series"),
154 .ident = "Fujitsu Lifebook S2000",
155 .matches = {
156 DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"),
157 DMI_MATCH(DMI_PRODUCT_NAME, "LifeBook S Series"),
161 .ident = "Fujitsu Lifebook S6230",
162 .matches = {
163 DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"),
164 DMI_MATCH(DMI_PRODUCT_NAME, "LifeBook S6230"),
168 .ident = "Fujitsu T70H",
169 .matches = {
170 DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"),
171 DMI_MATCH(DMI_PRODUCT_NAME, "FMVLT70H"),
175 .ident = "Fujitsu-Siemens Lifebook T3010",
176 .matches = {
177 DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"),
178 DMI_MATCH(DMI_PRODUCT_NAME, "LIFEBOOK T3010"),
182 .ident = "Fujitsu-Siemens Lifebook E4010",
183 .matches = {
184 DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"),
185 DMI_MATCH(DMI_PRODUCT_NAME, "LIFEBOOK E4010"),
189 .ident = "Fujitsu-Siemens Amilo Pro 2010",
190 .matches = {
191 DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"),
192 DMI_MATCH(DMI_PRODUCT_NAME, "AMILO Pro V2010"),
197 * No data is coming from the touchscreen unless KBC
198 * is in legacy mode.
200 .ident = "Panasonic CF-29",
201 .matches = {
202 DMI_MATCH(DMI_SYS_VENDOR, "Matsushita"),
203 DMI_MATCH(DMI_PRODUCT_NAME, "CF-29"),
208 * Errors on MUX ports are reported without raising AUXDATA
209 * causing "spurious NAK" messages.
211 .ident = "HP Pavilion DV4017EA",
212 .matches = {
213 DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
214 DMI_MATCH(DMI_PRODUCT_NAME, "Pavilion dv4000 (EA032EA#ABF)"),
219 * Like DV4017EA does not raise AUXERR for errors on MUX ports.
221 .ident = "HP Pavilion ZT1000",
222 .matches = {
223 DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
224 DMI_MATCH(DMI_PRODUCT_NAME, "HP Pavilion Notebook PC"),
225 DMI_MATCH(DMI_PRODUCT_VERSION, "HP Pavilion Notebook ZT1000"),
230 * Like DV4017EA does not raise AUXERR for errors on MUX ports.
232 .ident = "HP Pavilion DV4270ca",
233 .matches = {
234 DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
235 DMI_MATCH(DMI_PRODUCT_NAME, "Pavilion dv4000 (EH476UA#ABL)"),
239 .ident = "Toshiba P10",
240 .matches = {
241 DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
242 DMI_MATCH(DMI_PRODUCT_NAME, "Satellite P10"),
246 .ident = "Toshiba Equium A110",
247 .matches = {
248 DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
249 DMI_MATCH(DMI_PRODUCT_NAME, "EQUIUM A110"),
253 .ident = "Alienware Sentia",
254 .matches = {
255 DMI_MATCH(DMI_SYS_VENDOR, "ALIENWARE"),
256 DMI_MATCH(DMI_PRODUCT_NAME, "Sentia"),
260 .ident = "Sharp Actius MM20",
261 .matches = {
262 DMI_MATCH(DMI_SYS_VENDOR, "SHARP"),
263 DMI_MATCH(DMI_PRODUCT_NAME, "PC-MM20 Series"),
267 .ident = "Sony Vaio FS-115b",
268 .matches = {
269 DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
270 DMI_MATCH(DMI_PRODUCT_NAME, "VGN-FS115B"),
274 .ident = "Amoi M636/A737",
275 .matches = {
276 DMI_MATCH(DMI_SYS_VENDOR, "Amoi Electronics CO.,LTD."),
277 DMI_MATCH(DMI_PRODUCT_NAME, "M636/A737 platform"),
281 .ident = "Lenovo 3000 n100",
282 .matches = {
283 DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
284 DMI_MATCH(DMI_PRODUCT_VERSION, "3000 N100"),
292 #endif
294 #ifdef CONFIG_X86
296 #include <linux/dmi.h>
299 * Some Wistron based laptops need us to explicitly enable the 'Dritek
300 * keyboard extension' to make their extra keys start generating scancodes.
301 * Originally, this was just confined to older laptops, but a few Acer laptops
302 * have turned up in 2007 that also need this again.
304 static struct dmi_system_id __initdata i8042_dmi_dritek_table[] = {
306 .ident = "Acer Aspire 5630",
307 .matches = {
308 DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
309 DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5630"),
313 .ident = "Acer Aspire 5650",
314 .matches = {
315 DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
316 DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5650"),
320 .ident = "Acer Aspire 5680",
321 .matches = {
322 DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
323 DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5680"),
327 .ident = "Acer Aspire 9110",
328 .matches = {
329 DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
330 DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 9110"),
334 .ident = "Acer TravelMate 2490",
335 .matches = {
336 DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
337 DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 2490"),
343 #endif /* CONFIG_X86 */
346 #ifdef CONFIG_PNP
347 #include <linux/pnp.h>
349 static int i8042_pnp_kbd_registered;
350 static unsigned int i8042_pnp_kbd_devices;
351 static int i8042_pnp_aux_registered;
352 static unsigned int i8042_pnp_aux_devices;
354 static int i8042_pnp_command_reg;
355 static int i8042_pnp_data_reg;
356 static int i8042_pnp_kbd_irq;
357 static int i8042_pnp_aux_irq;
359 static char i8042_pnp_kbd_name[32];
360 static char i8042_pnp_aux_name[32];
362 static int i8042_pnp_kbd_probe(struct pnp_dev *dev, const struct pnp_device_id *did)
364 if (pnp_port_valid(dev, 0) && pnp_port_len(dev, 0) == 1)
365 i8042_pnp_data_reg = pnp_port_start(dev,0);
367 if (pnp_port_valid(dev, 1) && pnp_port_len(dev, 1) == 1)
368 i8042_pnp_command_reg = pnp_port_start(dev, 1);
370 if (pnp_irq_valid(dev,0))
371 i8042_pnp_kbd_irq = pnp_irq(dev, 0);
373 strlcpy(i8042_pnp_kbd_name, did->id, sizeof(i8042_pnp_kbd_name));
374 if (strlen(pnp_dev_name(dev))) {
375 strlcat(i8042_pnp_kbd_name, ":", sizeof(i8042_pnp_kbd_name));
376 strlcat(i8042_pnp_kbd_name, pnp_dev_name(dev), sizeof(i8042_pnp_kbd_name));
379 i8042_pnp_kbd_devices++;
380 return 0;
383 static int i8042_pnp_aux_probe(struct pnp_dev *dev, const struct pnp_device_id *did)
385 if (pnp_port_valid(dev, 0) && pnp_port_len(dev, 0) == 1)
386 i8042_pnp_data_reg = pnp_port_start(dev,0);
388 if (pnp_port_valid(dev, 1) && pnp_port_len(dev, 1) == 1)
389 i8042_pnp_command_reg = pnp_port_start(dev, 1);
391 if (pnp_irq_valid(dev, 0))
392 i8042_pnp_aux_irq = pnp_irq(dev, 0);
394 strlcpy(i8042_pnp_aux_name, did->id, sizeof(i8042_pnp_aux_name));
395 if (strlen(pnp_dev_name(dev))) {
396 strlcat(i8042_pnp_aux_name, ":", sizeof(i8042_pnp_aux_name));
397 strlcat(i8042_pnp_aux_name, pnp_dev_name(dev), sizeof(i8042_pnp_aux_name));
400 i8042_pnp_aux_devices++;
401 return 0;
404 static struct pnp_device_id pnp_kbd_devids[] = {
405 { .id = "PNP0303", .driver_data = 0 },
406 { .id = "PNP030b", .driver_data = 0 },
407 { .id = "", },
410 static struct pnp_driver i8042_pnp_kbd_driver = {
411 .name = "i8042 kbd",
412 .id_table = pnp_kbd_devids,
413 .probe = i8042_pnp_kbd_probe,
416 static struct pnp_device_id pnp_aux_devids[] = {
417 { .id = "FJC6000", .driver_data = 0 },
418 { .id = "FJC6001", .driver_data = 0 },
419 { .id = "PNP0f03", .driver_data = 0 },
420 { .id = "PNP0f0b", .driver_data = 0 },
421 { .id = "PNP0f0e", .driver_data = 0 },
422 { .id = "PNP0f12", .driver_data = 0 },
423 { .id = "PNP0f13", .driver_data = 0 },
424 { .id = "PNP0f19", .driver_data = 0 },
425 { .id = "PNP0f1c", .driver_data = 0 },
426 { .id = "SYN0801", .driver_data = 0 },
427 { .id = "", },
430 static struct pnp_driver i8042_pnp_aux_driver = {
431 .name = "i8042 aux",
432 .id_table = pnp_aux_devids,
433 .probe = i8042_pnp_aux_probe,
436 static void i8042_pnp_exit(void)
438 if (i8042_pnp_kbd_registered) {
439 i8042_pnp_kbd_registered = 0;
440 pnp_unregister_driver(&i8042_pnp_kbd_driver);
443 if (i8042_pnp_aux_registered) {
444 i8042_pnp_aux_registered = 0;
445 pnp_unregister_driver(&i8042_pnp_aux_driver);
449 static int __init i8042_pnp_init(void)
451 char kbd_irq_str[4] = { 0 }, aux_irq_str[4] = { 0 };
452 int pnp_data_busted = 0;
453 int err;
455 if (i8042_nopnp) {
456 printk(KERN_INFO "i8042: PNP detection disabled\n");
457 return 0;
460 err = pnp_register_driver(&i8042_pnp_kbd_driver);
461 if (!err)
462 i8042_pnp_kbd_registered = 1;
464 err = pnp_register_driver(&i8042_pnp_aux_driver);
465 if (!err)
466 i8042_pnp_aux_registered = 1;
468 if (!i8042_pnp_kbd_devices && !i8042_pnp_aux_devices) {
469 i8042_pnp_exit();
470 #if defined(__ia64__)
471 return -ENODEV;
472 #else
473 printk(KERN_INFO "PNP: No PS/2 controller found. Probing ports directly.\n");
474 return 0;
475 #endif
478 if (i8042_pnp_kbd_devices)
479 snprintf(kbd_irq_str, sizeof(kbd_irq_str),
480 "%d", i8042_pnp_kbd_irq);
481 if (i8042_pnp_aux_devices)
482 snprintf(aux_irq_str, sizeof(aux_irq_str),
483 "%d", i8042_pnp_aux_irq);
485 printk(KERN_INFO "PNP: PS/2 Controller [%s%s%s] at %#x,%#x irq %s%s%s\n",
486 i8042_pnp_kbd_name, (i8042_pnp_kbd_devices && i8042_pnp_aux_devices) ? "," : "",
487 i8042_pnp_aux_name,
488 i8042_pnp_data_reg, i8042_pnp_command_reg,
489 kbd_irq_str, (i8042_pnp_kbd_devices && i8042_pnp_aux_devices) ? "," : "",
490 aux_irq_str);
492 #if defined(__ia64__)
493 if (!i8042_pnp_kbd_devices)
494 i8042_nokbd = 1;
495 if (!i8042_pnp_aux_devices)
496 i8042_noaux = 1;
497 #endif
499 if (((i8042_pnp_data_reg & ~0xf) == (i8042_data_reg & ~0xf) &&
500 i8042_pnp_data_reg != i8042_data_reg) ||
501 !i8042_pnp_data_reg) {
502 printk(KERN_WARNING
503 "PNP: PS/2 controller has invalid data port %#x; "
504 "using default %#x\n",
505 i8042_pnp_data_reg, i8042_data_reg);
506 i8042_pnp_data_reg = i8042_data_reg;
507 pnp_data_busted = 1;
510 if (((i8042_pnp_command_reg & ~0xf) == (i8042_command_reg & ~0xf) &&
511 i8042_pnp_command_reg != i8042_command_reg) ||
512 !i8042_pnp_command_reg) {
513 printk(KERN_WARNING
514 "PNP: PS/2 controller has invalid command port %#x; "
515 "using default %#x\n",
516 i8042_pnp_command_reg, i8042_command_reg);
517 i8042_pnp_command_reg = i8042_command_reg;
518 pnp_data_busted = 1;
521 if (!i8042_nokbd && !i8042_pnp_kbd_irq) {
522 printk(KERN_WARNING
523 "PNP: PS/2 controller doesn't have KBD irq; "
524 "using default %d\n", i8042_kbd_irq);
525 i8042_pnp_kbd_irq = i8042_kbd_irq;
526 pnp_data_busted = 1;
529 if (!i8042_noaux && !i8042_pnp_aux_irq) {
530 if (!pnp_data_busted && i8042_pnp_kbd_irq) {
531 printk(KERN_WARNING
532 "PNP: PS/2 appears to have AUX port disabled, "
533 "if this is incorrect please boot with "
534 "i8042.nopnp\n");
535 i8042_noaux = 1;
536 } else {
537 printk(KERN_WARNING
538 "PNP: PS/2 controller doesn't have AUX irq; "
539 "using default %d\n", i8042_aux_irq);
540 i8042_pnp_aux_irq = i8042_aux_irq;
544 i8042_data_reg = i8042_pnp_data_reg;
545 i8042_command_reg = i8042_pnp_command_reg;
546 i8042_kbd_irq = i8042_pnp_kbd_irq;
547 i8042_aux_irq = i8042_pnp_aux_irq;
549 return 0;
552 #else
553 static inline int i8042_pnp_init(void) { return 0; }
554 static inline void i8042_pnp_exit(void) { }
555 #endif
557 static int __init i8042_platform_init(void)
559 int retval;
562 * On ix86 platforms touching the i8042 data register region can do really
563 * bad things. Because of this the region is always reserved on ix86 boxes.
565 * if (!request_region(I8042_DATA_REG, 16, "i8042"))
566 * return -EBUSY;
569 i8042_kbd_irq = I8042_MAP_IRQ(1);
570 i8042_aux_irq = I8042_MAP_IRQ(12);
572 retval = i8042_pnp_init();
573 if (retval)
574 return retval;
576 #if defined(__ia64__)
577 i8042_reset = 1;
578 #endif
580 #if defined(__i386__) || defined(__x86_64__)
581 if (dmi_check_system(i8042_dmi_noloop_table))
582 i8042_noloop = 1;
584 if (dmi_check_system(i8042_dmi_nomux_table))
585 i8042_nomux = 1;
586 #endif
588 #ifdef CONFIG_X86
589 if (dmi_check_system(i8042_dmi_dritek_table))
590 i8042_dritek = 1;
591 #endif /* CONFIG_X86 */
593 return retval;
596 static inline void i8042_platform_exit(void)
598 i8042_pnp_exit();
601 #endif /* _I8042_X86IA64IO_H */