drivers/bluetooth/ath3k.c

   1 /*
   2  * Copyright (c) 2008-2009 Atheros Communications Inc.
   3  *
   4  *  This program is free software; you can redistribute it and/or modify
   5  *  it under the terms of the GNU General Public License as published by
   6  *  the Free Software Foundation; either version 2 of the License, or
   7  *  (at your option) any later version.
   8  *
   9  *  This program is distributed in the hope that it will be useful,
  10  *  but WITHOUT ANY WARRANTY; without even the implied warranty of
  11  *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  12  *  GNU General Public License for more details.
  13  *
  14  *  You should have received a copy of the GNU General Public License
  15  *  along with this program; if not, write to the Free Software
  16  *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  17  *
  18  */
  19
  20
  21 #include <linux/module.h>
  22 #include <linux/kernel.h>
  23 #include <linux/init.h>
  24 #include <linux/slab.h>
  25 #include <linux/types.h>
  26 #include <linux/errno.h>
  27 #include <linux/device.h>
  28 #include <linux/firmware.h>
  29 #include <linux/usb.h>
  30 #include <net/bluetooth/bluetooth.h>
  31
  32 #define VERSION "1.0"
  33 #define ATH3K_FIRMWARE  "ath3k-1.fw"
  34
  35 #define ATH3K_DNLOAD                            0x01
  36 #define ATH3K_GETSTATE                          0x05
  37 #define ATH3K_SET_NORMAL_MODE                   0x07
  38 #define ATH3K_GETVERSION                        0x09
  39 #define USB_REG_SWITCH_VID_PID                  0x0a
  40
  41 #define ATH3K_MODE_MASK                         0x3F
  42 #define ATH3K_NORMAL_MODE                       0x0E
  43
  44 #define ATH3K_PATCH_UPDATE                      0x80
  45 #define ATH3K_SYSCFG_UPDATE                     0x40
  46
  47 #define ATH3K_XTAL_FREQ_26M                     0x00
  48 #define ATH3K_XTAL_FREQ_40M                     0x01
  49 #define ATH3K_XTAL_FREQ_19P2                    0x02
  50 #define ATH3K_NAME_LEN                          0xFF
  51
  52 struct ath3k_version {
  53         unsigned int    rom_version;
  54         unsigned int    build_version;
  55         unsigned int    ram_version;
  56         unsigned char   ref_clock;
  57         unsigned char   reserved[0x07];
  58 };
  59
  60 static struct usb_device_id ath3k_table[] = {
  61         /* Atheros AR3011 */
  62         { USB_DEVICE(0x0CF3, 0x3000) },
  63
  64         /* Atheros AR3011 with sflash firmware*/
  65         { USB_DEVICE(0x0CF3, 0x3002) },
  66         { USB_DEVICE(0x0CF3, 0xE019) },
  67         { USB_DEVICE(0x13d3, 0x3304) },
  68         { USB_DEVICE(0x0930, 0x0215) },
  69         { USB_DEVICE(0x0489, 0xE03D) },
  70         { USB_DEVICE(0x0489, 0xE027) },
  71
  72         /* Atheros AR9285 Malbec with sflash firmware */
  73         { USB_DEVICE(0x03F0, 0x311D) },
  74
  75         /* Atheros AR3012 with sflash firmware*/
  76         { USB_DEVICE(0x0CF3, 0x3004) },
  77         { USB_DEVICE(0x0CF3, 0x311D) },
  78         { USB_DEVICE(0x13d3, 0x3375) },
  79         { USB_DEVICE(0x04CA, 0x3005) },
  80         { USB_DEVICE(0x04CA, 0x3006) },
  81         { USB_DEVICE(0x04CA, 0x3008) },
  82         { USB_DEVICE(0x13d3, 0x3362) },
  83         { USB_DEVICE(0x0CF3, 0xE004) },
  84         { USB_DEVICE(0x0930, 0x0219) },
  85         { USB_DEVICE(0x0489, 0xe057) },
  86         { USB_DEVICE(0x13d3, 0x3393) },
  87         { USB_DEVICE(0x0489, 0xe04e) },
  88         { USB_DEVICE(0x0489, 0xe056) },
  89
  90         /* Atheros AR5BBU12 with sflash firmware */
  91         { USB_DEVICE(0x0489, 0xE02C) },
  92
  93         /* Atheros AR5BBU22 with sflash firmware */
  94         { USB_DEVICE(0x0489, 0xE03C) },
  95         { USB_DEVICE(0x0489, 0xE036) },
  96
  97         { }     /* Terminating entry */
  98 };
  99
 100 MODULE_DEVICE_TABLE(usb, ath3k_table);
 101
 102 #define BTUSB_ATH3012           0x80
 103 /* This table is to load patch and sysconfig files
 104  * for AR3012 */
 105 static struct usb_device_id ath3k_blist_tbl[] = {
 106
 107         /* Atheros AR3012 with sflash firmware*/
 108         { USB_DEVICE(0x0cf3, 0x3004), .driver_info = BTUSB_ATH3012 },
 109         { USB_DEVICE(0x0cf3, 0x311D), .driver_info = BTUSB_ATH3012 },
 110         { USB_DEVICE(0x13d3, 0x3375), .driver_info = BTUSB_ATH3012 },
 111         { USB_DEVICE(0x04ca, 0x3005), .driver_info = BTUSB_ATH3012 },
 112         { USB_DEVICE(0x04ca, 0x3006), .driver_info = BTUSB_ATH3012 },
 113         { USB_DEVICE(0x04ca, 0x3008), .driver_info = BTUSB_ATH3012 },
 114         { USB_DEVICE(0x13d3, 0x3362), .driver_info = BTUSB_ATH3012 },
 115         { USB_DEVICE(0x0cf3, 0xe004), .driver_info = BTUSB_ATH3012 },
 116         { USB_DEVICE(0x0930, 0x0219), .driver_info = BTUSB_ATH3012 },
 117         { USB_DEVICE(0x0489, 0xe057), .driver_info = BTUSB_ATH3012 },
 118         { USB_DEVICE(0x13d3, 0x3393), .driver_info = BTUSB_ATH3012 },
 119         { USB_DEVICE(0x0489, 0xe04e), .driver_info = BTUSB_ATH3012 },
 120         { USB_DEVICE(0x0489, 0xe056), .driver_info = BTUSB_ATH3012 },
 121
 122         /* Atheros AR5BBU22 with sflash firmware */
 123         { USB_DEVICE(0x0489, 0xE03C), .driver_info = BTUSB_ATH3012 },
 124         { USB_DEVICE(0x0489, 0xE036), .driver_info = BTUSB_ATH3012 },
 125
 126         { }     /* Terminating entry */
 127 };
 128
 129 #define USB_REQ_DFU_DNLOAD      1
 130 #define BULK_SIZE               4096
 131 #define FW_HDR_SIZE             20
 132
 133 static int ath3k_load_firmware(struct usb_device *udev,
 134                                 const struct firmware *firmware)
 135 {
 136         u8 *send_buf;
 137         int err, pipe, len, size, sent = 0;
 138         int count = firmware->size;
 139
 140         BT_DBG("udev %p", udev);
 141
 142         pipe = usb_sndctrlpipe(udev, 0);
 143
 144         send_buf = kmalloc(BULK_SIZE, GFP_KERNEL);
 145         if (!send_buf) {
 146                 BT_ERR("Can't allocate memory chunk for firmware");
 147                 return -ENOMEM;
 148         }
 149
 150         memcpy(send_buf, firmware->data, 20);
 151         if ((err = usb_control_msg(udev, pipe,
 152                                 USB_REQ_DFU_DNLOAD,
 153                                 USB_TYPE_VENDOR, 0, 0,
 154                                 send_buf, 20, USB_CTRL_SET_TIMEOUT)) < 0) {
 155                 BT_ERR("Can't change to loading configuration err");
 156                 goto error;
 157         }
 158         sent += 20;
 159         count -= 20;
 160
 161         while (count) {
 162                 size = min_t(uint, count, BULK_SIZE);
 163                 pipe = usb_sndbulkpipe(udev, 0x02);
 164                 memcpy(send_buf, firmware->data + sent, size);
 165
 166                 err = usb_bulk_msg(udev, pipe, send_buf, size,
 167                                         &len, 3000);
 168
 169                 if (err || (len != size)) {
 170                         BT_ERR("Error in firmware loading err = %d,"
 171                                 "len = %d, size = %d", err, len, size);
 172                         goto error;
 173                 }
 174
 175                 sent  += size;
 176                 count -= size;
 177         }
 178
 179 error:
 180         kfree(send_buf);
 181         return err;
 182 }
 183
 184 static int ath3k_get_state(struct usb_device *udev, unsigned char *state)
 185 {
 186         int pipe = 0;
 187
 188         pipe = usb_rcvctrlpipe(udev, 0);
 189         return usb_control_msg(udev, pipe, ATH3K_GETSTATE,
 190                         USB_TYPE_VENDOR | USB_DIR_IN, 0, 0,
 191                         state, 0x01, USB_CTRL_SET_TIMEOUT);
 192 }
 193
 194 static int ath3k_get_version(struct usb_device *udev,
 195                         struct ath3k_version *version)
 196 {
 197         int pipe = 0;
 198
 199         pipe = usb_rcvctrlpipe(udev, 0);
 200         return usb_control_msg(udev, pipe, ATH3K_GETVERSION,
 201                         USB_TYPE_VENDOR | USB_DIR_IN, 0, 0, version,
 202                         sizeof(struct ath3k_version),
 203                         USB_CTRL_SET_TIMEOUT);
 204 }
 205
 206 static int ath3k_load_fwfile(struct usb_device *udev,
 207                 const struct firmware *firmware)
 208 {
 209         u8 *send_buf;
 210         int err, pipe, len, size, count, sent = 0;
 211         int ret;
 212
 213         count = firmware->size;
 214
 215         send_buf = kmalloc(BULK_SIZE, GFP_KERNEL);
 216         if (!send_buf) {
 217                 BT_ERR("Can't allocate memory chunk for firmware");
 218                 return -ENOMEM;
 219         }
 220
 221         size = min_t(uint, count, FW_HDR_SIZE);
 222         memcpy(send_buf, firmware->data, size);
 223
 224         pipe = usb_sndctrlpipe(udev, 0);
 225         ret = usb_control_msg(udev, pipe, ATH3K_DNLOAD,
 226                         USB_TYPE_VENDOR, 0, 0, send_buf,
 227                         size, USB_CTRL_SET_TIMEOUT);
 228         if (ret < 0) {
 229                 BT_ERR("Can't change to loading configuration err");
 230                 kfree(send_buf);
 231                 return ret;
 232         }
 233
 234         sent += size;
 235         count -= size;
 236
 237         while (count) {
 238                 size = min_t(uint, count, BULK_SIZE);
 239                 pipe = usb_sndbulkpipe(udev, 0x02);
 240
 241                 memcpy(send_buf, firmware->data + sent, size);
 242
 243                 err = usb_bulk_msg(udev, pipe, send_buf, size,
 244                                         &len, 3000);
 245                 if (err || (len != size)) {
 246                         BT_ERR("Error in firmware loading err = %d,"
 247                                 "len = %d, size = %d", err, len, size);
 248                         kfree(send_buf);
 249                         return err;
 250                 }
 251                 sent  += size;
 252                 count -= size;
 253         }
 254
 255         kfree(send_buf);
 256         return 0;
 257 }
 258
 259 static int ath3k_switch_pid(struct usb_device *udev)
 260 {
 261         int pipe = 0;
 262
 263         pipe = usb_sndctrlpipe(udev, 0);
 264         return usb_control_msg(udev, pipe, USB_REG_SWITCH_VID_PID,
 265                         USB_TYPE_VENDOR, 0, 0,
 266                         NULL, 0, USB_CTRL_SET_TIMEOUT);
 267 }
 268
 269 static int ath3k_set_normal_mode(struct usb_device *udev)
 270 {
 271         unsigned char fw_state;
 272         int pipe = 0, ret;
 273
 274         ret = ath3k_get_state(udev, &fw_state);
 275         if (ret < 0) {
 276                 BT_ERR("Can't get state to change to normal mode err");
 277                 return ret;
 278         }
 279
 280         if ((fw_state & ATH3K_MODE_MASK) == ATH3K_NORMAL_MODE) {
 281                 BT_DBG("firmware was already in normal mode");
 282                 return 0;
 283         }
 284
 285         pipe = usb_sndctrlpipe(udev, 0);
 286         return usb_control_msg(udev, pipe, ATH3K_SET_NORMAL_MODE,
 287                         USB_TYPE_VENDOR, 0, 0,
 288                         NULL, 0, USB_CTRL_SET_TIMEOUT);
 289 }
 290
 291 static int ath3k_load_patch(struct usb_device *udev)
 292 {
 293         unsigned char fw_state;
 294         char filename[ATH3K_NAME_LEN] = {0};
 295         const struct firmware *firmware;
 296         struct ath3k_version fw_version, pt_version;
 297         int ret;
 298
 299         ret = ath3k_get_state(udev, &fw_state);
 300         if (ret < 0) {
 301                 BT_ERR("Can't get state to change to load ram patch err");
 302                 return ret;
 303         }
 304
 305         if (fw_state & ATH3K_PATCH_UPDATE) {
 306                 BT_DBG("Patch was already downloaded");
 307                 return 0;
 308         }
 309
 310         ret = ath3k_get_version(udev, &fw_version);
 311         if (ret < 0) {
 312                 BT_ERR("Can't get version to change to load ram patch err");
 313                 return ret;
 314         }
 315
 316         snprintf(filename, ATH3K_NAME_LEN, "ar3k/AthrBT_0x%08x.dfu",
 317                 fw_version.rom_version);
 318
 319         ret = request_firmware(&firmware, filename, &udev->dev);
 320         if (ret < 0) {
 321                 BT_ERR("Patch file not found %s", filename);
 322                 return ret;
 323         }
 324
 325         pt_version.rom_version = *(int *)(firmware->data + firmware->size - 8);
 326         pt_version.build_version = *(int *)
 327                 (firmware->data + firmware->size - 4);
 328
 329         if ((pt_version.rom_version != fw_version.rom_version) ||
 330                 (pt_version.build_version <= fw_version.build_version)) {
 331                 BT_ERR("Patch file version did not match with firmware");
 332                 release_firmware(firmware);
 333                 return -EINVAL;
 334         }
 335
 336         ret = ath3k_load_fwfile(udev, firmware);
 337         release_firmware(firmware);
 338
 339         return ret;
 340 }
 341
 342 static int ath3k_load_syscfg(struct usb_device *udev)
 343 {
 344         unsigned char fw_state;
 345         char filename[ATH3K_NAME_LEN] = {0};
 346         const struct firmware *firmware;
 347         struct ath3k_version fw_version;
 348         int clk_value, ret;
 349
 350         ret = ath3k_get_state(udev, &fw_state);
 351         if (ret < 0) {
 352                 BT_ERR("Can't get state to change to load configration err");
 353                 return -EBUSY;
 354         }
 355
 356         ret = ath3k_get_version(udev, &fw_version);
 357         if (ret < 0) {
 358                 BT_ERR("Can't get version to change to load ram patch err");
 359                 return ret;
 360         }
 361
 362         switch (fw_version.ref_clock) {
 363
 364         case ATH3K_XTAL_FREQ_26M:
 365                 clk_value = 26;
 366                 break;
 367         case ATH3K_XTAL_FREQ_40M:
 368                 clk_value = 40;
 369                 break;
 370         case ATH3K_XTAL_FREQ_19P2:
 371                 clk_value = 19;
 372                 break;
 373         default:
 374                 clk_value = 0;
 375                 break;
 376         }
 377
 378         snprintf(filename, ATH3K_NAME_LEN, "ar3k/ramps_0x%08x_%d%s",
 379                 fw_version.rom_version, clk_value, ".dfu");
 380
 381         ret = request_firmware(&firmware, filename, &udev->dev);
 382         if (ret < 0) {
 383                 BT_ERR("Configuration file not found %s", filename);
 384                 return ret;
 385         }
 386
 387         ret = ath3k_load_fwfile(udev, firmware);
 388         release_firmware(firmware);
 389
 390         return ret;
 391 }
 392
 393 static int ath3k_probe(struct usb_interface *intf,
 394                         const struct usb_device_id *id)
 395 {
 396         const struct firmware *firmware;
 397         struct usb_device *udev = interface_to_usbdev(intf);
 398         int ret;
 399
 400         BT_DBG("intf %p id %p", intf, id);
 401
 402         if (intf->cur_altsetting->desc.bInterfaceNumber != 0)
 403                 return -ENODEV;
 404
 405         /* match device ID in ath3k blacklist table */
 406         if (!id->driver_info) {
 407                 const struct usb_device_id *match;
 408                 match = usb_match_id(intf, ath3k_blist_tbl);
 409                 if (match)
 410                         id = match;
 411         }
 412
 413         /* load patch and sysconfig files for AR3012 */
 414         if (id->driver_info & BTUSB_ATH3012) {
 415
 416                 /* New firmware with patch and sysconfig files already loaded */
 417                 if (le16_to_cpu(udev->descriptor.bcdDevice) > 0x0001)
 418                         return -ENODEV;
 419
 420                 ret = ath3k_load_patch(udev);
 421                 if (ret < 0) {
 422                         BT_ERR("Loading patch file failed");
 423                         return ret;
 424                 }
 425                 ret = ath3k_load_syscfg(udev);
 426                 if (ret < 0) {
 427                         BT_ERR("Loading sysconfig file failed");
 428                         return ret;
 429                 }
 430                 ret = ath3k_set_normal_mode(udev);
 431                 if (ret < 0) {
 432                         BT_ERR("Set normal mode failed");
 433                         return ret;
 434                 }
 435                 ath3k_switch_pid(udev);
 436                 return 0;
 437         }
 438
 439         ret = request_firmware(&firmware, ATH3K_FIRMWARE, &udev->dev);
 440         if (ret < 0) {
 441                 if (ret == -ENOENT)
 442                         BT_ERR("Firmware file \"%s\" not found",
 443                                                         ATH3K_FIRMWARE);
 444                 else
 445                         BT_ERR("Firmware file \"%s\" request failed (err=%d)",
 446                                                         ATH3K_FIRMWARE, ret);
 447                 return ret;
 448         }
 449
 450         ret = ath3k_load_firmware(udev, firmware);
 451         release_firmware(firmware);
 452
 453         return ret;
 454 }
 455
 456 static void ath3k_disconnect(struct usb_interface *intf)
 457 {
 458         BT_DBG("ath3k_disconnect intf %p", intf);
 459 }
 460
 461 static struct usb_driver ath3k_driver = {
 462         .name           = "ath3k",
 463         .probe          = ath3k_probe,
 464         .disconnect     = ath3k_disconnect,
 465         .id_table       = ath3k_table,
 466         .disable_hub_initiated_lpm = 1,
 467 };
 468
 469 module_usb_driver(ath3k_driver);
 470
 471 MODULE_AUTHOR("Atheros Communications");
 472 MODULE_DESCRIPTION("Atheros AR30xx firmware driver");
 473 MODULE_VERSION(VERSION);
 474 MODULE_LICENSE("GPL");
 475 MODULE_FIRMWARE(ATH3K_FIRMWARE);