arch/arm/mach-omap2/board-3430sdp.c

   1 /*
   2  * linux/arch/arm/mach-omap2/board-3430sdp.c
   3  *
   4  * Copyright (C) 2007 Texas Instruments
   5  *
   6  * Modified from mach-omap2/board-generic.c
   7  *
   8  * Initial code: Syed Mohammed Khasim
   9  *
  10  * This program is free software; you can redistribute it and/or modify
  11  * it under the terms of the GNU General Public License version 2 as
  12  * published by the Free Software Foundation.
  13  */
  14
  15 #include <linux/kernel.h>
  16 #include <linux/init.h>
  17 #include <linux/platform_device.h>
  18 #include <linux/delay.h>
  19 #include <linux/input.h>
  20 #include <linux/input/matrix_keypad.h>
  21 #include <linux/spi/spi.h>
  22 #include <linux/spi/ads7846.h>
  23 #include <linux/i2c/twl.h>
  24 #include <linux/regulator/machine.h>
  25 #include <linux/io.h>
  26 #include <linux/gpio.h>
  27 #include <linux/mmc/host.h>
  28
  29 #include <mach/hardware.h>
  30 #include <asm/mach-types.h>
  31 #include <asm/mach/arch.h>
  32 #include <asm/mach/map.h>
  33
  34 #include <plat/mcspi.h>
  35 #include <plat/board.h>
  36 #include <plat/usb.h>
  37 #include <plat/common.h>
  38 #include <plat/dma.h>
  39 #include <plat/gpmc.h>
  40 #include <plat/display.h>
  41
  42 #include <plat/gpmc-smc91x.h>
  43
  44 #include "board-flash.h"
  45 #include "mux.h"
  46 #include "sdram-qimonda-hyb18m512160af-6.h"
  47 #include "hsmmc.h"
  48 #include "pm.h"
  49 #include "control.h"
  50
  51 #define CONFIG_DISABLE_HFCLK 1
  52
  53 #define SDP3430_TS_GPIO_IRQ_SDPV1       3
  54 #define SDP3430_TS_GPIO_IRQ_SDPV2       2
  55
  56 #define ENABLE_VAUX3_DEDICATED  0x03
  57 #define ENABLE_VAUX3_DEV_GRP    0x20
  58
  59 #define TWL4030_MSECURE_GPIO 22
  60
  61 /* FIXME: These values need to be updated based on more profiling on 3430sdp*/
  62 static struct cpuidle_params omap3_cpuidle_params_table[] = {
  63         /* C1 */
  64         {1, 2, 2, 5},
  65         /* C2 */
  66         {1, 10, 10, 30},
  67         /* C3 */
  68         {1, 50, 50, 300},
  69         /* C4 */
  70         {1, 1500, 1800, 4000},
  71         /* C5 */
  72         {1, 2500, 7500, 12000},
  73         /* C6 */
  74         {1, 3000, 8500, 15000},
  75         /* C7 */
  76         {1, 10000, 30000, 300000},
  77 };
  78
  79 static uint32_t board_keymap[] = {
  80         KEY(0, 0, KEY_LEFT),
  81         KEY(0, 1, KEY_RIGHT),
  82         KEY(0, 2, KEY_A),
  83         KEY(0, 3, KEY_B),
  84         KEY(0, 4, KEY_C),
  85         KEY(1, 0, KEY_DOWN),
  86         KEY(1, 1, KEY_UP),
  87         KEY(1, 2, KEY_E),
  88         KEY(1, 3, KEY_F),
  89         KEY(1, 4, KEY_G),
  90         KEY(2, 0, KEY_ENTER),
  91         KEY(2, 1, KEY_I),
  92         KEY(2, 2, KEY_J),
  93         KEY(2, 3, KEY_K),
  94         KEY(2, 4, KEY_3),
  95         KEY(3, 0, KEY_M),
  96         KEY(3, 1, KEY_N),
  97         KEY(3, 2, KEY_O),
  98         KEY(3, 3, KEY_P),
  99         KEY(3, 4, KEY_Q),
 100         KEY(4, 0, KEY_R),
 101         KEY(4, 1, KEY_4),
 102         KEY(4, 2, KEY_T),
 103         KEY(4, 3, KEY_U),
 104         KEY(4, 4, KEY_D),
 105         KEY(5, 0, KEY_V),
 106         KEY(5, 1, KEY_W),
 107         KEY(5, 2, KEY_L),
 108         KEY(5, 3, KEY_S),
 109         KEY(5, 4, KEY_H),
 110         0
 111 };
 112
 113 static struct matrix_keymap_data board_map_data = {
 114         .keymap                 = board_keymap,
 115         .keymap_size            = ARRAY_SIZE(board_keymap),
 116 };
 117
 118 static struct twl4030_keypad_data sdp3430_kp_data = {
 119         .keymap_data    = &board_map_data,
 120         .rows           = 5,
 121         .cols           = 6,
 122         .rep            = 1,
 123 };
 124
 125 static int ts_gpio;     /* Needed for ads7846_get_pendown_state */
 126
 127 /**
 128  * @brief ads7846_dev_init : Requests & sets GPIO line for pen-irq
 129  *
 130  * @return - void. If request gpio fails then Flag KERN_ERR.
 131  */
 132 static void ads7846_dev_init(void)
 133 {
 134         if (gpio_request(ts_gpio, "ADS7846 pendown") < 0) {
 135                 printk(KERN_ERR "can't get ads746 pen down GPIO\n");
 136                 return;
 137         }
 138
 139         gpio_direction_input(ts_gpio);
 140         gpio_set_debounce(ts_gpio, 310);
 141 }
 142
 143 static int ads7846_get_pendown_state(void)
 144 {
 145         return !gpio_get_value(ts_gpio);
 146 }
 147
 148 static struct ads7846_platform_data tsc2046_config __initdata = {
 149         .get_pendown_state      = ads7846_get_pendown_state,
 150         .keep_vref_on           = 1,
 151         .wakeup                         = true,
 152 };
 153
 154
 155 static struct omap2_mcspi_device_config tsc2046_mcspi_config = {
 156         .turbo_mode     = 0,
 157         .single_channel = 1,    /* 0: slave, 1: master */
 158 };
 159
 160 static struct spi_board_info sdp3430_spi_board_info[] __initdata = {
 161         [0] = {
 162                 /*
 163                  * TSC2046 operates at a max freqency of 2MHz, so
 164                  * operate slightly below at 1.5MHz
 165                  */
 166                 .modalias               = "ads7846",
 167                 .bus_num                = 1,
 168                 .chip_select            = 0,
 169                 .max_speed_hz           = 1500000,
 170                 .controller_data        = &tsc2046_mcspi_config,
 171                 .irq                    = 0,
 172                 .platform_data          = &tsc2046_config,
 173         },
 174 };
 175
 176
 177 #define SDP3430_LCD_PANEL_BACKLIGHT_GPIO        8
 178 #define SDP3430_LCD_PANEL_ENABLE_GPIO           5
 179
 180 static unsigned backlight_gpio;
 181 static unsigned enable_gpio;
 182 static int lcd_enabled;
 183 static int dvi_enabled;
 184
 185 static void __init sdp3430_display_init(void)
 186 {
 187         int r;
 188
 189         enable_gpio    = SDP3430_LCD_PANEL_ENABLE_GPIO;
 190         backlight_gpio = SDP3430_LCD_PANEL_BACKLIGHT_GPIO;
 191
 192         r = gpio_request(enable_gpio, "LCD reset");
 193         if (r) {
 194                 printk(KERN_ERR "failed to get LCD reset GPIO\n");
 195                 goto err0;
 196         }
 197
 198         r = gpio_request(backlight_gpio, "LCD Backlight");
 199         if (r) {
 200                 printk(KERN_ERR "failed to get LCD backlight GPIO\n");
 201                 goto err1;
 202         }
 203
 204         gpio_direction_output(enable_gpio, 0);
 205         gpio_direction_output(backlight_gpio, 0);
 206
 207         return;
 208 err1:
 209         gpio_free(enable_gpio);
 210 err0:
 211         return;
 212 }
 213
 214 static int sdp3430_panel_enable_lcd(struct omap_dss_device *dssdev)
 215 {
 216         if (dvi_enabled) {
 217                 printk(KERN_ERR "cannot enable LCD, DVI is enabled\n");
 218                 return -EINVAL;
 219         }
 220
 221         gpio_direction_output(enable_gpio, 1);
 222         gpio_direction_output(backlight_gpio, 1);
 223
 224         lcd_enabled = 1;
 225
 226         return 0;
 227 }
 228
 229 static void sdp3430_panel_disable_lcd(struct omap_dss_device *dssdev)
 230 {
 231         lcd_enabled = 0;
 232
 233         gpio_direction_output(enable_gpio, 0);
 234         gpio_direction_output(backlight_gpio, 0);
 235 }
 236
 237 static int sdp3430_panel_enable_dvi(struct omap_dss_device *dssdev)
 238 {
 239         if (lcd_enabled) {
 240                 printk(KERN_ERR "cannot enable DVI, LCD is enabled\n");
 241                 return -EINVAL;
 242         }
 243
 244         dvi_enabled = 1;
 245
 246         return 0;
 247 }
 248
 249 static void sdp3430_panel_disable_dvi(struct omap_dss_device *dssdev)
 250 {
 251         dvi_enabled = 0;
 252 }
 253
 254 static int sdp3430_panel_enable_tv(struct omap_dss_device *dssdev)
 255 {
 256         return 0;
 257 }
 258
 259 static void sdp3430_panel_disable_tv(struct omap_dss_device *dssdev)
 260 {
 261 }
 262
 263
 264 static struct omap_dss_device sdp3430_lcd_device = {
 265         .name                   = "lcd",
 266         .driver_name            = "sharp_ls_panel",
 267         .type                   = OMAP_DISPLAY_TYPE_DPI,
 268         .phy.dpi.data_lines     = 16,
 269         .platform_enable        = sdp3430_panel_enable_lcd,
 270         .platform_disable       = sdp3430_panel_disable_lcd,
 271 };
 272
 273 static struct omap_dss_device sdp3430_dvi_device = {
 274         .name                   = "dvi",
 275         .driver_name            = "generic_panel",
 276         .type                   = OMAP_DISPLAY_TYPE_DPI,
 277         .phy.dpi.data_lines     = 24,
 278         .platform_enable        = sdp3430_panel_enable_dvi,
 279         .platform_disable       = sdp3430_panel_disable_dvi,
 280 };
 281
 282 static struct omap_dss_device sdp3430_tv_device = {
 283         .name                   = "tv",
 284         .driver_name            = "venc",
 285         .type                   = OMAP_DISPLAY_TYPE_VENC,
 286         .phy.venc.type          = OMAP_DSS_VENC_TYPE_SVIDEO,
 287         .platform_enable        = sdp3430_panel_enable_tv,
 288         .platform_disable       = sdp3430_panel_disable_tv,
 289 };
 290
 291
 292 static struct omap_dss_device *sdp3430_dss_devices[] = {
 293         &sdp3430_lcd_device,
 294         &sdp3430_dvi_device,
 295         &sdp3430_tv_device,
 296 };
 297
 298 static struct omap_dss_board_info sdp3430_dss_data = {
 299         .num_devices    = ARRAY_SIZE(sdp3430_dss_devices),
 300         .devices        = sdp3430_dss_devices,
 301         .default_device = &sdp3430_lcd_device,
 302 };
 303
 304 static struct platform_device sdp3430_dss_device = {
 305         .name           = "omapdss",
 306         .id             = -1,
 307         .dev            = {
 308                 .platform_data = &sdp3430_dss_data,
 309         },
 310 };
 311
 312 static struct regulator_consumer_supply sdp3430_vdda_dac_supply = {
 313         .supply         = "vdda_dac",
 314         .dev            = &sdp3430_dss_device.dev,
 315 };
 316
 317 static struct platform_device *sdp3430_devices[] __initdata = {
 318         &sdp3430_dss_device,
 319 };
 320
 321 static struct omap_board_config_kernel sdp3430_config[] __initdata = {
 322 };
 323
 324 static void __init omap_3430sdp_init_irq(void)
 325 {
 326         omap_board_config = sdp3430_config;
 327         omap_board_config_size = ARRAY_SIZE(sdp3430_config);
 328         omap3_pm_init_cpuidle(omap3_cpuidle_params_table);
 329         omap2_init_common_hw(hyb18m512160af6_sdrc_params, NULL);
 330         omap_init_irq();
 331         omap_gpio_init();
 332 }
 333
 334 static int sdp3430_batt_table[] = {
 335 /* 0 C*/
 336 30800, 29500, 28300, 27100,
 337 26000, 24900, 23900, 22900, 22000, 21100, 20300, 19400, 18700, 17900,
 338 17200, 16500, 15900, 15300, 14700, 14100, 13600, 13100, 12600, 12100,
 339 11600, 11200, 10800, 10400, 10000, 9630,   9280,   8950,   8620,   8310,
 340 8020,   7730,   7460,   7200,   6950,   6710,   6470,   6250,   6040,   5830,
 341 5640,   5450,   5260,   5090,   4920,   4760,   4600,   4450,   4310,   4170,
 342 4040,   3910,   3790,   3670,   3550
 343 };
 344
 345 static struct twl4030_bci_platform_data sdp3430_bci_data = {
 346         .battery_tmp_tbl        = sdp3430_batt_table,
 347         .tblsize                = ARRAY_SIZE(sdp3430_batt_table),
 348 };
 349
 350 static struct omap2_hsmmc_info mmc[] = {
 351         {
 352                 .mmc            = 1,
 353                 /* 8 bits (default) requires S6.3 == ON,
 354                  * so the SIM card isn't used; else 4 bits.
 355                  */
 356                 .caps           = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
 357                 .gpio_wp        = 4,
 358         },
 359         {
 360                 .mmc            = 2,
 361                 .caps           = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
 362                 .gpio_wp        = 7,
 363         },
 364         {}      /* Terminator */
 365 };
 366
 367 static struct regulator_consumer_supply sdp3430_vmmc1_supply = {
 368         .supply                 = "vmmc",
 369 };
 370
 371 static struct regulator_consumer_supply sdp3430_vsim_supply = {
 372         .supply                 = "vmmc_aux",
 373 };
 374
 375 static struct regulator_consumer_supply sdp3430_vmmc2_supply = {
 376         .supply                 = "vmmc",
 377 };
 378
 379 static int sdp3430_twl_gpio_setup(struct device *dev,
 380                 unsigned gpio, unsigned ngpio)
 381 {
 382         /* gpio + 0 is "mmc0_cd" (input/IRQ),
 383          * gpio + 1 is "mmc1_cd" (input/IRQ)
 384          */
 385         mmc[0].gpio_cd = gpio + 0;
 386         mmc[1].gpio_cd = gpio + 1;
 387         omap2_hsmmc_init(mmc);
 388
 389         /* link regulators to MMC adapters ... we "know" the
 390          * regulators will be set up only *after* we return.
 391          */
 392         sdp3430_vmmc1_supply.dev = mmc[0].dev;
 393         sdp3430_vsim_supply.dev = mmc[0].dev;
 394         sdp3430_vmmc2_supply.dev = mmc[1].dev;
 395
 396         /* gpio + 7 is "sub_lcd_en_bkl" (output/PWM1) */
 397         gpio_request(gpio + 7, "sub_lcd_en_bkl");
 398         gpio_direction_output(gpio + 7, 0);
 399
 400         /* gpio + 15 is "sub_lcd_nRST" (output) */
 401         gpio_request(gpio + 15, "sub_lcd_nRST");
 402         gpio_direction_output(gpio + 15, 0);
 403
 404         return 0;
 405 }
 406
 407 static struct twl4030_gpio_platform_data sdp3430_gpio_data = {
 408         .gpio_base      = OMAP_MAX_GPIO_LINES,
 409         .irq_base       = TWL4030_GPIO_IRQ_BASE,
 410         .irq_end        = TWL4030_GPIO_IRQ_END,
 411         .pulldowns      = BIT(2) | BIT(6) | BIT(8) | BIT(13)
 412                                 | BIT(16) | BIT(17),
 413         .setup          = sdp3430_twl_gpio_setup,
 414 };
 415
 416 static struct twl4030_usb_data sdp3430_usb_data = {
 417         .usb_mode       = T2_USB_MODE_ULPI,
 418 };
 419
 420 static struct twl4030_madc_platform_data sdp3430_madc_data = {
 421         .irq_line       = 1,
 422 };
 423
 424 /*
 425  * Apply all the fixed voltages since most versions of U-Boot
 426  * don't bother with that initialization.
 427  */
 428
 429 /* VAUX1 for mainboard (irda and sub-lcd) */
 430 static struct regulator_init_data sdp3430_vaux1 = {
 431         .constraints = {
 432                 .min_uV                 = 2800000,
 433                 .max_uV                 = 2800000,
 434                 .apply_uV               = true,
 435                 .valid_modes_mask       = REGULATOR_MODE_NORMAL
 436                                         | REGULATOR_MODE_STANDBY,
 437                 .valid_ops_mask         = REGULATOR_CHANGE_MODE
 438                                         | REGULATOR_CHANGE_STATUS,
 439         },
 440 };
 441
 442 /* VAUX2 for camera module */
 443 static struct regulator_init_data sdp3430_vaux2 = {
 444         .constraints = {
 445                 .min_uV                 = 2800000,
 446                 .max_uV                 = 2800000,
 447                 .apply_uV               = true,
 448                 .valid_modes_mask       = REGULATOR_MODE_NORMAL
 449                                         | REGULATOR_MODE_STANDBY,
 450                 .valid_ops_mask         = REGULATOR_CHANGE_MODE
 451                                         | REGULATOR_CHANGE_STATUS,
 452         },
 453 };
 454
 455 /* VAUX3 for LCD board */
 456 static struct regulator_init_data sdp3430_vaux3 = {
 457         .constraints = {
 458                 .min_uV                 = 2800000,
 459                 .max_uV                 = 2800000,
 460                 .apply_uV               = true,
 461                 .valid_modes_mask       = REGULATOR_MODE_NORMAL
 462                                         | REGULATOR_MODE_STANDBY,
 463                 .valid_ops_mask         = REGULATOR_CHANGE_MODE
 464                                         | REGULATOR_CHANGE_STATUS,
 465         },
 466 };
 467
 468 /* VAUX4 for OMAP VDD_CSI2 (camera) */
 469 static struct regulator_init_data sdp3430_vaux4 = {
 470         .constraints = {
 471                 .min_uV                 = 1800000,
 472                 .max_uV                 = 1800000,
 473                 .apply_uV               = true,
 474                 .valid_modes_mask       = REGULATOR_MODE_NORMAL
 475                                         | REGULATOR_MODE_STANDBY,
 476                 .valid_ops_mask         = REGULATOR_CHANGE_MODE
 477                                         | REGULATOR_CHANGE_STATUS,
 478         },
 479 };
 480
 481 /* VMMC1 for OMAP VDD_MMC1 (i/o) and MMC1 card */
 482 static struct regulator_init_data sdp3430_vmmc1 = {
 483         .constraints = {
 484                 .min_uV                 = 1850000,
 485                 .max_uV                 = 3150000,
 486                 .valid_modes_mask       = REGULATOR_MODE_NORMAL
 487                                         | REGULATOR_MODE_STANDBY,
 488                 .valid_ops_mask         = REGULATOR_CHANGE_VOLTAGE
 489                                         | REGULATOR_CHANGE_MODE
 490                                         | REGULATOR_CHANGE_STATUS,
 491         },
 492         .num_consumer_supplies  = 1,
 493         .consumer_supplies      = &sdp3430_vmmc1_supply,
 494 };
 495
 496 /* VMMC2 for MMC2 card */
 497 static struct regulator_init_data sdp3430_vmmc2 = {
 498         .constraints = {
 499                 .min_uV                 = 1850000,
 500                 .max_uV                 = 1850000,
 501                 .apply_uV               = true,
 502                 .valid_modes_mask       = REGULATOR_MODE_NORMAL
 503                                         | REGULATOR_MODE_STANDBY,
 504                 .valid_ops_mask         = REGULATOR_CHANGE_MODE
 505                                         | REGULATOR_CHANGE_STATUS,
 506         },
 507         .num_consumer_supplies  = 1,
 508         .consumer_supplies      = &sdp3430_vmmc2_supply,
 509 };
 510
 511 /* VSIM for OMAP VDD_MMC1A (i/o for DAT4..DAT7) */
 512 static struct regulator_init_data sdp3430_vsim = {
 513         .constraints = {
 514                 .min_uV                 = 1800000,
 515                 .max_uV                 = 3000000,
 516                 .valid_modes_mask       = REGULATOR_MODE_NORMAL
 517                                         | REGULATOR_MODE_STANDBY,
 518                 .valid_ops_mask         = REGULATOR_CHANGE_VOLTAGE
 519                                         | REGULATOR_CHANGE_MODE
 520                                         | REGULATOR_CHANGE_STATUS,
 521         },
 522         .num_consumer_supplies  = 1,
 523         .consumer_supplies      = &sdp3430_vsim_supply,
 524 };
 525
 526 /* VDAC for DSS driving S-Video */
 527 static struct regulator_init_data sdp3430_vdac = {
 528         .constraints = {
 529                 .min_uV                 = 1800000,
 530                 .max_uV                 = 1800000,
 531                 .apply_uV               = true,
 532                 .valid_modes_mask       = REGULATOR_MODE_NORMAL
 533                                         | REGULATOR_MODE_STANDBY,
 534                 .valid_ops_mask         = REGULATOR_CHANGE_MODE
 535                                         | REGULATOR_CHANGE_STATUS,
 536         },
 537         .num_consumer_supplies  = 1,
 538         .consumer_supplies      = &sdp3430_vdda_dac_supply,
 539 };
 540
 541 /* VPLL2 for digital video outputs */
 542 static struct regulator_consumer_supply sdp3430_vpll2_supplies[] = {
 543         {
 544                 .supply         = "vdds_dsi",
 545                 .dev            = &sdp3430_dss_device.dev,
 546         }
 547 };
 548
 549 static struct regulator_init_data sdp3430_vpll2 = {
 550         .constraints = {
 551                 .name                   = "VDVI",
 552                 .min_uV                 = 1800000,
 553                 .max_uV                 = 1800000,
 554                 .apply_uV               = true,
 555                 .valid_modes_mask       = REGULATOR_MODE_NORMAL
 556                                         | REGULATOR_MODE_STANDBY,
 557                 .valid_ops_mask         = REGULATOR_CHANGE_MODE
 558                                         | REGULATOR_CHANGE_STATUS,
 559         },
 560         .num_consumer_supplies  = ARRAY_SIZE(sdp3430_vpll2_supplies),
 561         .consumer_supplies      = sdp3430_vpll2_supplies,
 562 };
 563
 564 static struct twl4030_codec_audio_data sdp3430_audio = {
 565         .audio_mclk = 26000000,
 566 };
 567
 568 static struct twl4030_codec_data sdp3430_codec = {
 569         .audio_mclk = 26000000,
 570         .audio = &sdp3430_audio,
 571 };
 572
 573 static struct twl4030_platform_data sdp3430_twldata = {
 574         .irq_base       = TWL4030_IRQ_BASE,
 575         .irq_end        = TWL4030_IRQ_END,
 576
 577         /* platform_data for children goes here */
 578         .bci            = &sdp3430_bci_data,
 579         .gpio           = &sdp3430_gpio_data,
 580         .madc           = &sdp3430_madc_data,
 581         .keypad         = &sdp3430_kp_data,
 582         .usb            = &sdp3430_usb_data,
 583         .codec          = &sdp3430_codec,
 584
 585         .vaux1          = &sdp3430_vaux1,
 586         .vaux2          = &sdp3430_vaux2,
 587         .vaux3          = &sdp3430_vaux3,
 588         .vaux4          = &sdp3430_vaux4,
 589         .vmmc1          = &sdp3430_vmmc1,
 590         .vmmc2          = &sdp3430_vmmc2,
 591         .vsim           = &sdp3430_vsim,
 592         .vdac           = &sdp3430_vdac,
 593         .vpll2          = &sdp3430_vpll2,
 594 };
 595
 596 static struct i2c_board_info __initdata sdp3430_i2c_boardinfo[] = {
 597         {
 598                 I2C_BOARD_INFO("twl4030", 0x48),
 599                 .flags = I2C_CLIENT_WAKE,
 600                 .irq = INT_34XX_SYS_NIRQ,
 601                 .platform_data = &sdp3430_twldata,
 602         },
 603 };
 604
 605 static int __init omap3430_i2c_init(void)
 606 {
 607         /* i2c1 for PMIC only */
 608         omap_register_i2c_bus(1, 2600, sdp3430_i2c_boardinfo,
 609                         ARRAY_SIZE(sdp3430_i2c_boardinfo));
 610         /* i2c2 on camera connector (for sensor control) and optional isp1301 */
 611         omap_register_i2c_bus(2, 400, NULL, 0);
 612         /* i2c3 on display connector (for DVI, tfp410) */
 613         omap_register_i2c_bus(3, 400, NULL, 0);
 614         return 0;
 615 }
 616
 617 #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
 618
 619 static struct omap_smc91x_platform_data board_smc91x_data = {
 620         .cs             = 3,
 621         .flags          = GPMC_MUX_ADD_DATA | GPMC_TIMINGS_SMC91C96 |
 622                                 IORESOURCE_IRQ_LOWLEVEL,
 623 };
 624
 625 static void __init board_smc91x_init(void)
 626 {
 627         if (omap_rev() > OMAP3430_REV_ES1_0)
 628                 board_smc91x_data.gpio_irq = 6;
 629         else
 630                 board_smc91x_data.gpio_irq = 29;
 631
 632         gpmc_smc91x_init(&board_smc91x_data);
 633 }
 634
 635 #else
 636
 637 static inline void board_smc91x_init(void)
 638 {
 639 }
 640
 641 #endif
 642
 643 static void enable_board_wakeup_source(void)
 644 {
 645         /* T2 interrupt line (keypad) */
 646         omap_mux_init_signal("sys_nirq",
 647                 OMAP_WAKEUP_EN | OMAP_PIN_INPUT_PULLUP);
 648 }
 649
 650 static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
 651
 652         .port_mode[0] = EHCI_HCD_OMAP_MODE_PHY,
 653         .port_mode[1] = EHCI_HCD_OMAP_MODE_PHY,
 654         .port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN,
 655
 656         .phy_reset  = true,
 657         .reset_gpio_port[0]  = 57,
 658         .reset_gpio_port[1]  = 61,
 659         .reset_gpio_port[2]  = -EINVAL
 660 };
 661
 662 #ifdef CONFIG_OMAP_MUX
 663 static struct omap_board_mux board_mux[] __initdata = {
 664         { .reg_offset = OMAP_MUX_TERMINATOR },
 665 };
 666 #else
 667 #define board_mux       NULL
 668 #endif
 669
 670 /*
 671  * SDP3430 V2 Board CS organization
 672  * Different from SDP3430 V1. Now 4 switches used to specify CS
 673  *
 674  * See also the Switch S8 settings in the comments.
 675  */
 676 static char chip_sel_3430[][GPMC_CS_NUM] = {
 677         {PDC_NOR, PDC_NAND, PDC_ONENAND, DBG_MPDB, 0, 0, 0, 0}, /* S8:1111 */
 678         {PDC_ONENAND, PDC_NAND, PDC_NOR, DBG_MPDB, 0, 0, 0, 0}, /* S8:1110 */
 679         {PDC_NAND, PDC_ONENAND, PDC_NOR, DBG_MPDB, 0, 0, 0, 0}, /* S8:1101 */
 680 };
 681
 682 static struct mtd_partition sdp_nor_partitions[] = {
 683         /* bootloader (U-Boot, etc) in first sector */
 684         {
 685                 .name           = "Bootloader-NOR",
 686                 .offset         = 0,
 687                 .size           = SZ_256K,
 688                 .mask_flags     = MTD_WRITEABLE, /* force read-only */
 689         },
 690         /* bootloader params in the next sector */
 691         {
 692                 .name           = "Params-NOR",
 693                 .offset         = MTDPART_OFS_APPEND,
 694                 .size           = SZ_256K,
 695                 .mask_flags     = 0,
 696         },
 697         /* kernel */
 698         {
 699                 .name           = "Kernel-NOR",
 700                 .offset         = MTDPART_OFS_APPEND,
 701                 .size           = SZ_2M,
 702                 .mask_flags     = 0
 703         },
 704         /* file system */
 705         {
 706                 .name           = "Filesystem-NOR",
 707                 .offset         = MTDPART_OFS_APPEND,
 708                 .size           = MTDPART_SIZ_FULL,
 709                 .mask_flags     = 0
 710         }
 711 };
 712
 713 static struct mtd_partition sdp_onenand_partitions[] = {
 714         {
 715                 .name           = "X-Loader-OneNAND",
 716                 .offset         = 0,
 717                 .size           = 4 * (64 * 2048),
 718                 .mask_flags     = MTD_WRITEABLE  /* force read-only */
 719         },
 720         {
 721                 .name           = "U-Boot-OneNAND",
 722                 .offset         = MTDPART_OFS_APPEND,
 723                 .size           = 2 * (64 * 2048),
 724                 .mask_flags     = MTD_WRITEABLE  /* force read-only */
 725         },
 726         {
 727                 .name           = "U-Boot Environment-OneNAND",
 728                 .offset         = MTDPART_OFS_APPEND,
 729                 .size           = 1 * (64 * 2048),
 730         },
 731         {
 732                 .name           = "Kernel-OneNAND",
 733                 .offset         = MTDPART_OFS_APPEND,
 734                 .size           = 16 * (64 * 2048),
 735         },
 736         {
 737                 .name           = "File System-OneNAND",
 738                 .offset         = MTDPART_OFS_APPEND,
 739                 .size           = MTDPART_SIZ_FULL,
 740         },
 741 };
 742
 743 static struct mtd_partition sdp_nand_partitions[] = {
 744         /* All the partition sizes are listed in terms of NAND block size */
 745         {
 746                 .name           = "X-Loader-NAND",
 747                 .offset         = 0,
 748                 .size           = 4 * (64 * 2048),
 749                 .mask_flags     = MTD_WRITEABLE,        /* force read-only */
 750         },
 751         {
 752                 .name           = "U-Boot-NAND",
 753                 .offset         = MTDPART_OFS_APPEND,   /* Offset = 0x80000 */
 754                 .size           = 10 * (64 * 2048),
 755                 .mask_flags     = MTD_WRITEABLE,        /* force read-only */
 756         },
 757         {
 758                 .name           = "Boot Env-NAND",
 759
 760                 .offset         = MTDPART_OFS_APPEND,   /* Offset = 0x1c0000 */
 761                 .size           = 6 * (64 * 2048),
 762         },
 763         {
 764                 .name           = "Kernel-NAND",
 765                 .offset         = MTDPART_OFS_APPEND,   /* Offset = 0x280000 */
 766                 .size           = 40 * (64 * 2048),
 767         },
 768         {
 769                 .name           = "File System - NAND",
 770                 .size           = MTDPART_SIZ_FULL,
 771                 .offset         = MTDPART_OFS_APPEND,   /* Offset = 0x780000 */
 772         },
 773 };
 774
 775 static struct flash_partitions sdp_flash_partitions[] = {
 776         {
 777                 .parts = sdp_nor_partitions,
 778                 .nr_parts = ARRAY_SIZE(sdp_nor_partitions),
 779         },
 780         {
 781                 .parts = sdp_onenand_partitions,
 782                 .nr_parts = ARRAY_SIZE(sdp_onenand_partitions),
 783         },
 784         {
 785                 .parts = sdp_nand_partitions,
 786                 .nr_parts = ARRAY_SIZE(sdp_nand_partitions),
 787         },
 788 };
 789
 790 static struct omap_musb_board_data musb_board_data = {
 791         .interface_type         = MUSB_INTERFACE_ULPI,
 792         .mode                   = MUSB_OTG,
 793         .power                  = 100,
 794 };
 795
 796 static void __init omap_3430sdp_init(void)
 797 {
 798         omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
 799         omap3430_i2c_init();
 800         platform_add_devices(sdp3430_devices, ARRAY_SIZE(sdp3430_devices));
 801         if (omap_rev() > OMAP3430_REV_ES1_0)
 802                 ts_gpio = SDP3430_TS_GPIO_IRQ_SDPV2;
 803         else
 804                 ts_gpio = SDP3430_TS_GPIO_IRQ_SDPV1;
 805         sdp3430_spi_board_info[0].irq = gpio_to_irq(ts_gpio);
 806         spi_register_board_info(sdp3430_spi_board_info,
 807                                 ARRAY_SIZE(sdp3430_spi_board_info));
 808         ads7846_dev_init();
 809         omap_serial_init();
 810         usb_musb_init(&musb_board_data);
 811         board_smc91x_init();
 812         board_flash_init(sdp_flash_partitions, chip_sel_3430);
 813         sdp3430_display_init();
 814         enable_board_wakeup_source();
 815         usb_ehci_init(&ehci_pdata);
 816 }
 817
 818 MACHINE_START(OMAP_3430SDP, "OMAP3430 3430SDP board")
 819         /* Maintainer: Syed Khasim - Texas Instruments Inc */
 820         .boot_params    = 0x80000100,
 821         .map_io         = omap3_map_io,
 822         .reserve        = omap_reserve,
 823         .init_irq       = omap_3430sdp_init_irq,
 824         .init_machine   = omap_3430sdp_init,
 825         .timer          = &omap_timer,
 826 MACHINE_END