Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
[linux-2.6/libata-dev.git] / drivers / block / cciss.h
blobc5d411174db0fb282d019a391c94f723513a84ae
1 #ifndef CCISS_H
2 #define CCISS_H
4 #include <linux/genhd.h>
5 #include <linux/mutex.h>
7 #include "cciss_cmd.h"
10 #define NWD_SHIFT 4
11 #define MAX_PART (1 << NWD_SHIFT)
13 #define IO_OK 0
14 #define IO_ERROR 1
15 #define IO_NEEDS_RETRY 3
17 #define VENDOR_LEN 8
18 #define MODEL_LEN 16
19 #define REV_LEN 4
21 struct ctlr_info;
22 typedef struct ctlr_info ctlr_info_t;
24 struct access_method {
25 void (*submit_command)(ctlr_info_t *h, CommandList_struct *c);
26 void (*set_intr_mask)(ctlr_info_t *h, unsigned long val);
27 unsigned long (*fifo_full)(ctlr_info_t *h);
28 unsigned long (*intr_pending)(ctlr_info_t *h);
29 unsigned long (*command_completed)(ctlr_info_t *h);
31 typedef struct _drive_info_struct
33 unsigned char LunID[8];
34 int usage_count;
35 struct request_queue *queue;
36 sector_t nr_blocks;
37 int block_size;
38 int heads;
39 int sectors;
40 int cylinders;
41 int raid_level; /* set to -1 to indicate that
42 * the drive is not in use/configured
44 int busy_configuring; /* This is set when a drive is being removed
45 * to prevent it from being opened or it's
46 * queue from being started.
48 struct device dev;
49 __u8 serial_no[16]; /* from inquiry page 0x83,
50 * not necc. null terminated.
52 char vendor[VENDOR_LEN + 1]; /* SCSI vendor string */
53 char model[MODEL_LEN + 1]; /* SCSI model string */
54 char rev[REV_LEN + 1]; /* SCSI revision string */
55 char device_initialized; /* indicates whether dev is initialized */
56 } drive_info_struct;
58 struct ctlr_info
60 int ctlr;
61 char devname[8];
62 char *product_name;
63 char firm_ver[4]; /* Firmware version */
64 struct pci_dev *pdev;
65 __u32 board_id;
66 void __iomem *vaddr;
67 unsigned long paddr;
68 int nr_cmds; /* Number of commands allowed on this controller */
69 CfgTable_struct __iomem *cfgtable;
70 int interrupts_enabled;
71 int major;
72 int max_commands;
73 int commands_outstanding;
74 int max_outstanding; /* Debug */
75 int num_luns;
76 int highest_lun;
77 int usage_count; /* number of opens all all minor devices */
78 /* Need space for temp sg list
79 * number of scatter/gathers supported
80 * number of scatter/gathers in chained block
82 struct scatterlist **scatter_list;
83 int maxsgentries;
84 int chainsize;
85 int max_cmd_sgentries;
86 SGDescriptor_struct **cmd_sg_list;
88 # define DOORBELL_INT 0
89 # define PERF_MODE_INT 1
90 # define SIMPLE_MODE_INT 2
91 # define MEMQ_MODE_INT 3
92 unsigned int intr[4];
93 unsigned int msix_vector;
94 unsigned int msi_vector;
95 int cciss_max_sectors;
96 BYTE cciss_read;
97 BYTE cciss_write;
98 BYTE cciss_read_capacity;
100 /* information about each logical volume */
101 drive_info_struct *drv[CISS_MAX_LUN];
103 struct access_method access;
105 /* queue and queue Info */
106 struct hlist_head reqQ;
107 struct hlist_head cmpQ;
108 unsigned int Qdepth;
109 unsigned int maxQsinceinit;
110 unsigned int maxSG;
111 spinlock_t lock;
113 /* pointers to command and error info pool */
114 CommandList_struct *cmd_pool;
115 dma_addr_t cmd_pool_dhandle;
116 ErrorInfo_struct *errinfo_pool;
117 dma_addr_t errinfo_pool_dhandle;
118 unsigned long *cmd_pool_bits;
119 int nr_allocs;
120 int nr_frees;
121 int busy_configuring;
122 int busy_initializing;
123 int busy_scanning;
124 struct mutex busy_shutting_down;
126 /* This element holds the zero based queue number of the last
127 * queue to be started. It is used for fairness.
129 int next_to_run;
131 /* Disk structures we need to pass back */
132 struct gendisk *gendisk[CISS_MAX_LUN];
133 #ifdef CONFIG_CISS_SCSI_TAPE
134 struct cciss_scsi_adapter_data_t *scsi_ctlr;
135 #endif
136 unsigned char alive;
137 struct list_head scan_list;
138 struct completion scan_wait;
139 struct device dev;
142 /* Defining the diffent access_menthods */
144 * Memory mapped FIFO interface (SMART 53xx cards)
146 #define SA5_DOORBELL 0x20
147 #define SA5_REQUEST_PORT_OFFSET 0x40
148 #define SA5_REPLY_INTR_MASK_OFFSET 0x34
149 #define SA5_REPLY_PORT_OFFSET 0x44
150 #define SA5_INTR_STATUS 0x30
151 #define SA5_SCRATCHPAD_OFFSET 0xB0
153 #define SA5_CTCFG_OFFSET 0xB4
154 #define SA5_CTMEM_OFFSET 0xB8
156 #define SA5_INTR_OFF 0x08
157 #define SA5B_INTR_OFF 0x04
158 #define SA5_INTR_PENDING 0x08
159 #define SA5B_INTR_PENDING 0x04
160 #define FIFO_EMPTY 0xffffffff
161 #define CCISS_FIRMWARE_READY 0xffff0000 /* value in scratchpad register */
163 #define CISS_ERROR_BIT 0x02
165 #define CCISS_INTR_ON 1
166 #define CCISS_INTR_OFF 0
168 Send the command to the hardware
170 static void SA5_submit_command( ctlr_info_t *h, CommandList_struct *c)
172 #ifdef CCISS_DEBUG
173 printk("Sending %x - down to controller\n", c->busaddr );
174 #endif /* CCISS_DEBUG */
175 writel(c->busaddr, h->vaddr + SA5_REQUEST_PORT_OFFSET);
176 h->commands_outstanding++;
177 if ( h->commands_outstanding > h->max_outstanding)
178 h->max_outstanding = h->commands_outstanding;
182 * This card is the opposite of the other cards.
183 * 0 turns interrupts on...
184 * 0x08 turns them off...
186 static void SA5_intr_mask(ctlr_info_t *h, unsigned long val)
188 if (val)
189 { /* Turn interrupts on */
190 h->interrupts_enabled = 1;
191 writel(0, h->vaddr + SA5_REPLY_INTR_MASK_OFFSET);
192 } else /* Turn them off */
194 h->interrupts_enabled = 0;
195 writel( SA5_INTR_OFF,
196 h->vaddr + SA5_REPLY_INTR_MASK_OFFSET);
200 * This card is the opposite of the other cards.
201 * 0 turns interrupts on...
202 * 0x04 turns them off...
204 static void SA5B_intr_mask(ctlr_info_t *h, unsigned long val)
206 if (val)
207 { /* Turn interrupts on */
208 h->interrupts_enabled = 1;
209 writel(0, h->vaddr + SA5_REPLY_INTR_MASK_OFFSET);
210 } else /* Turn them off */
212 h->interrupts_enabled = 0;
213 writel( SA5B_INTR_OFF,
214 h->vaddr + SA5_REPLY_INTR_MASK_OFFSET);
218 * Returns true if fifo is full.
221 static unsigned long SA5_fifo_full(ctlr_info_t *h)
223 if( h->commands_outstanding >= h->max_commands)
224 return(1);
225 else
226 return(0);
230 * returns value read from hardware.
231 * returns FIFO_EMPTY if there is nothing to read
233 static unsigned long SA5_completed(ctlr_info_t *h)
235 unsigned long register_value
236 = readl(h->vaddr + SA5_REPLY_PORT_OFFSET);
237 if(register_value != FIFO_EMPTY)
239 h->commands_outstanding--;
240 #ifdef CCISS_DEBUG
241 printk("cciss: Read %lx back from board\n", register_value);
242 #endif /* CCISS_DEBUG */
244 #ifdef CCISS_DEBUG
245 else
247 printk("cciss: FIFO Empty read\n");
249 #endif
250 return ( register_value);
254 * Returns true if an interrupt is pending..
256 static unsigned long SA5_intr_pending(ctlr_info_t *h)
258 unsigned long register_value =
259 readl(h->vaddr + SA5_INTR_STATUS);
260 #ifdef CCISS_DEBUG
261 printk("cciss: intr_pending %lx\n", register_value);
262 #endif /* CCISS_DEBUG */
263 if( register_value & SA5_INTR_PENDING)
264 return 1;
265 return 0 ;
269 * Returns true if an interrupt is pending..
271 static unsigned long SA5B_intr_pending(ctlr_info_t *h)
273 unsigned long register_value =
274 readl(h->vaddr + SA5_INTR_STATUS);
275 #ifdef CCISS_DEBUG
276 printk("cciss: intr_pending %lx\n", register_value);
277 #endif /* CCISS_DEBUG */
278 if( register_value & SA5B_INTR_PENDING)
279 return 1;
280 return 0 ;
284 static struct access_method SA5_access = {
285 SA5_submit_command,
286 SA5_intr_mask,
287 SA5_fifo_full,
288 SA5_intr_pending,
289 SA5_completed,
292 static struct access_method SA5B_access = {
293 SA5_submit_command,
294 SA5B_intr_mask,
295 SA5_fifo_full,
296 SA5B_intr_pending,
297 SA5_completed,
300 struct board_type {
301 __u32 board_id;
302 char *product_name;
303 struct access_method *access;
304 int nr_cmds; /* Max cmds this kind of ctlr can handle. */
307 #define CCISS_LOCK(i) (&hba[i]->lock)
309 #endif /* CCISS_H */