arch/arm/mach-omap2/pm24xx.c

   1 /*
   2  * OMAP2 Power Management Routines
   3  *
   4  * Copyright (C) 2005 Texas Instruments, Inc.
   5  * Copyright (C) 2006-2008 Nokia Corporation
   6  *
   7  * Written by:
   8  * Richard Woodruff <r-woodruff2@ti.com>
   9  * Tony Lindgren
  10  * Juha Yrjola
  11  * Amit Kucheria <amit.kucheria@nokia.com>
  12  * Igor Stoppa <igor.stoppa@nokia.com>
  13  *
  14  * Based on pm.c for omap1
  15  *
  16  * This program is free software; you can redistribute it and/or modify
  17  * it under the terms of the GNU General Public License version 2 as
  18  * published by the Free Software Foundation.
  19  */
  20
  21 #include <linux/suspend.h>
  22 #include <linux/sched.h>
  23 #include <linux/proc_fs.h>
  24 #include <linux/interrupt.h>
  25 #include <linux/sysfs.h>
  26 #include <linux/module.h>
  27 #include <linux/delay.h>
  28 #include <linux/clk.h>
  29 #include <linux/io.h>
  30 #include <linux/irq.h>
  31 #include <linux/time.h>
  32 #include <linux/gpio.h>
  33 #include <linux/console.h>
  34
  35 #include <asm/mach/time.h>
  36 #include <asm/mach/irq.h>
  37 #include <asm/mach-types.h>
  38
  39 #include <mach/irqs.h>
  40 #include <plat/clock.h>
  41 #include <plat/sram.h>
  42 #include <plat/dma.h>
  43 #include <plat/board.h>
  44
  45 #include "prm2xxx_3xxx.h"
  46 #include "prm-regbits-24xx.h"
  47 #include "cm2xxx_3xxx.h"
  48 #include "cm-regbits-24xx.h"
  49 #include "sdrc.h"
  50 #include "pm.h"
  51 #include "control.h"
  52
  53 #include "powerdomain.h"
  54 #include "clockdomain.h"
  55
  56 static int omap2_pm_debug;
  57
  58 #ifdef CONFIG_SUSPEND
  59 static suspend_state_t suspend_state = PM_SUSPEND_ON;
  60 static inline bool is_suspending(void)
  61 {
  62         return (suspend_state != PM_SUSPEND_ON);
  63 }
  64 #else
  65 static inline bool is_suspending(void)
  66 {
  67         return false;
  68 }
  69 #endif
  70
  71 static void (*omap2_sram_idle)(void);
  72 static void (*omap2_sram_suspend)(u32 dllctrl, void __iomem *sdrc_dlla_ctrl,
  73                                   void __iomem *sdrc_power);
  74
  75 static struct powerdomain *mpu_pwrdm, *core_pwrdm;
  76 static struct clockdomain *dsp_clkdm, *mpu_clkdm, *wkup_clkdm, *gfx_clkdm;
  77
  78 static struct clk *osc_ck, *emul_ck;
  79
  80 static int omap2_fclks_active(void)
  81 {
  82         u32 f1, f2;
  83
  84         f1 = omap2_cm_read_mod_reg(CORE_MOD, CM_FCLKEN1);
  85         f2 = omap2_cm_read_mod_reg(CORE_MOD, OMAP24XX_CM_FCLKEN2);
  86
  87         /* Ignore UART clocks.  These are handled by UART core (serial.c) */
  88         f1 &= ~(OMAP24XX_EN_UART1_MASK | OMAP24XX_EN_UART2_MASK);
  89         f2 &= ~OMAP24XX_EN_UART3_MASK;
  90
  91         if (f1 | f2)
  92                 return 1;
  93         return 0;
  94 }
  95
  96 static void omap2_enter_full_retention(void)
  97 {
  98         u32 l;
  99         struct timespec ts_preidle, ts_postidle, ts_idle;
 100
 101         /* There is 1 reference hold for all children of the oscillator
 102          * clock, the following will remove it. If no one else uses the
 103          * oscillator itself it will be disabled if/when we enter retention
 104          * mode.
 105          */
 106         clk_disable(osc_ck);
 107
 108         /* Clear old wake-up events */
 109         /* REVISIT: These write to reserved bits? */
 110         omap2_prm_write_mod_reg(0xffffffff, CORE_MOD, PM_WKST1);
 111         omap2_prm_write_mod_reg(0xffffffff, CORE_MOD, OMAP24XX_PM_WKST2);
 112         omap2_prm_write_mod_reg(0xffffffff, WKUP_MOD, PM_WKST);
 113
 114         /*
 115          * Set MPU powerdomain's next power state to RETENTION;
 116          * preserve logic state during retention
 117          */
 118         pwrdm_set_logic_retst(mpu_pwrdm, PWRDM_POWER_RET);
 119         pwrdm_set_next_pwrst(mpu_pwrdm, PWRDM_POWER_RET);
 120
 121         /* Workaround to kill USB */
 122         l = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0) | OMAP24XX_USBSTANDBYCTRL;
 123         omap_ctrl_writel(l, OMAP2_CONTROL_DEVCONF0);
 124
 125         omap2_gpio_prepare_for_idle(0);
 126
 127         if (omap2_pm_debug) {
 128                 getnstimeofday(&ts_preidle);
 129         }
 130
 131         /* One last check for pending IRQs to avoid extra latency due
 132          * to sleeping unnecessarily. */
 133         if (omap_irq_pending())
 134                 goto no_sleep;
 135
 136         /* Block console output in case it is on one of the OMAP UARTs */
 137         if (!is_suspending())
 138                 if (!console_trylock())
 139                         goto no_sleep;
 140
 141         omap_uart_prepare_idle(0);
 142         omap_uart_prepare_idle(1);
 143         omap_uart_prepare_idle(2);
 144
 145         /* Jump to SRAM suspend code */
 146         omap2_sram_suspend(sdrc_read_reg(SDRC_DLLA_CTRL),
 147                            OMAP_SDRC_REGADDR(SDRC_DLLA_CTRL),
 148                            OMAP_SDRC_REGADDR(SDRC_POWER));
 149
 150         omap_uart_resume_idle(2);
 151         omap_uart_resume_idle(1);
 152         omap_uart_resume_idle(0);
 153
 154         if (!is_suspending())
 155                 console_unlock();
 156
 157 no_sleep:
 158         if (omap2_pm_debug) {
 159                 unsigned long long tmp;
 160
 161                 getnstimeofday(&ts_postidle);
 162                 ts_idle = timespec_sub(ts_postidle, ts_preidle);
 163                 tmp = timespec_to_ns(&ts_idle) * NSEC_PER_USEC;
 164         }
 165         omap2_gpio_resume_after_idle();
 166
 167         clk_enable(osc_ck);
 168
 169         /* clear CORE wake-up events */
 170         omap2_prm_write_mod_reg(0xffffffff, CORE_MOD, PM_WKST1);
 171         omap2_prm_write_mod_reg(0xffffffff, CORE_MOD, OMAP24XX_PM_WKST2);
 172
 173         /* wakeup domain events - bit 1: GPT1, bit5 GPIO */
 174         omap2_prm_clear_mod_reg_bits(0x4 | 0x1, WKUP_MOD, PM_WKST);
 175
 176         /* MPU domain wake events */
 177         l = omap2_prm_read_mod_reg(OCP_MOD, OMAP2_PRCM_IRQSTATUS_MPU_OFFSET);
 178         if (l & 0x01)
 179                 omap2_prm_write_mod_reg(0x01, OCP_MOD,
 180                                   OMAP2_PRCM_IRQSTATUS_MPU_OFFSET);
 181         if (l & 0x20)
 182                 omap2_prm_write_mod_reg(0x20, OCP_MOD,
 183                                   OMAP2_PRCM_IRQSTATUS_MPU_OFFSET);
 184
 185         /* Mask future PRCM-to-MPU interrupts */
 186         omap2_prm_write_mod_reg(0x0, OCP_MOD, OMAP2_PRCM_IRQSTATUS_MPU_OFFSET);
 187 }
 188
 189 static int omap2_i2c_active(void)
 190 {
 191         u32 l;
 192
 193         l = omap2_cm_read_mod_reg(CORE_MOD, CM_FCLKEN1);
 194         return l & (OMAP2420_EN_I2C2_MASK | OMAP2420_EN_I2C1_MASK);
 195 }
 196
 197 static int sti_console_enabled;
 198
 199 static int omap2_allow_mpu_retention(void)
 200 {
 201         u32 l;
 202
 203         /* Check for MMC, UART2, UART1, McSPI2, McSPI1 and DSS1. */
 204         l = omap2_cm_read_mod_reg(CORE_MOD, CM_FCLKEN1);
 205         if (l & (OMAP2420_EN_MMC_MASK | OMAP24XX_EN_UART2_MASK |
 206                  OMAP24XX_EN_UART1_MASK | OMAP24XX_EN_MCSPI2_MASK |
 207                  OMAP24XX_EN_MCSPI1_MASK | OMAP24XX_EN_DSS1_MASK))
 208                 return 0;
 209         /* Check for UART3. */
 210         l = omap2_cm_read_mod_reg(CORE_MOD, OMAP24XX_CM_FCLKEN2);
 211         if (l & OMAP24XX_EN_UART3_MASK)
 212                 return 0;
 213         if (sti_console_enabled)
 214                 return 0;
 215
 216         return 1;
 217 }
 218
 219 static void omap2_enter_mpu_retention(void)
 220 {
 221         int only_idle = 0;
 222         struct timespec ts_preidle, ts_postidle, ts_idle;
 223
 224         /* Putting MPU into the WFI state while a transfer is active
 225          * seems to cause the I2C block to timeout. Why? Good question. */
 226         if (omap2_i2c_active())
 227                 return;
 228
 229         /* The peripherals seem not to be able to wake up the MPU when
 230          * it is in retention mode. */
 231         if (omap2_allow_mpu_retention()) {
 232                 /* REVISIT: These write to reserved bits? */
 233                 omap2_prm_write_mod_reg(0xffffffff, CORE_MOD, PM_WKST1);
 234                 omap2_prm_write_mod_reg(0xffffffff, CORE_MOD, OMAP24XX_PM_WKST2);
 235                 omap2_prm_write_mod_reg(0xffffffff, WKUP_MOD, PM_WKST);
 236
 237                 /* Try to enter MPU retention */
 238                 omap2_prm_write_mod_reg((0x01 << OMAP_POWERSTATE_SHIFT) |
 239                                   OMAP_LOGICRETSTATE_MASK,
 240                                   MPU_MOD, OMAP2_PM_PWSTCTRL);
 241         } else {
 242                 /* Block MPU retention */
 243
 244                 omap2_prm_write_mod_reg(OMAP_LOGICRETSTATE_MASK, MPU_MOD,
 245                                                  OMAP2_PM_PWSTCTRL);
 246                 only_idle = 1;
 247         }
 248
 249         if (omap2_pm_debug) {
 250                 getnstimeofday(&ts_preidle);
 251         }
 252
 253         omap2_sram_idle();
 254
 255         if (omap2_pm_debug) {
 256                 unsigned long long tmp;
 257
 258                 getnstimeofday(&ts_postidle);
 259                 ts_idle = timespec_sub(ts_postidle, ts_preidle);
 260                 tmp = timespec_to_ns(&ts_idle) * NSEC_PER_USEC;
 261         }
 262 }
 263
 264 static int omap2_can_sleep(void)
 265 {
 266         if (omap2_fclks_active())
 267                 return 0;
 268         if (!omap_uart_can_sleep())
 269                 return 0;
 270         if (osc_ck->usecount > 1)
 271                 return 0;
 272         if (omap_dma_running())
 273                 return 0;
 274
 275         return 1;
 276 }
 277
 278 static void omap2_pm_idle(void)
 279 {
 280         local_irq_disable();
 281         local_fiq_disable();
 282
 283         if (!omap2_can_sleep()) {
 284                 if (omap_irq_pending())
 285                         goto out;
 286                 omap2_enter_mpu_retention();
 287                 goto out;
 288         }
 289
 290         if (omap_irq_pending())
 291                 goto out;
 292
 293         omap2_enter_full_retention();
 294
 295 out:
 296         local_fiq_enable();
 297         local_irq_enable();
 298 }
 299
 300 #ifdef CONFIG_SUSPEND
 301 static int omap2_pm_begin(suspend_state_t state)
 302 {
 303         disable_hlt();
 304         suspend_state = state;
 305         return 0;
 306 }
 307
 308 static int omap2_pm_suspend(void)
 309 {
 310         u32 wken_wkup, mir1;
 311
 312         wken_wkup = omap2_prm_read_mod_reg(WKUP_MOD, PM_WKEN);
 313         wken_wkup &= ~OMAP24XX_EN_GPT1_MASK;
 314         omap2_prm_write_mod_reg(wken_wkup, WKUP_MOD, PM_WKEN);
 315
 316         /* Mask GPT1 */
 317         mir1 = omap_readl(0x480fe0a4);
 318         omap_writel(1 << 5, 0x480fe0ac);
 319
 320         omap_uart_prepare_suspend();
 321         omap2_enter_full_retention();
 322
 323         omap_writel(mir1, 0x480fe0a4);
 324         omap2_prm_write_mod_reg(wken_wkup, WKUP_MOD, PM_WKEN);
 325
 326         return 0;
 327 }
 328
 329 static int omap2_pm_enter(suspend_state_t state)
 330 {
 331         int ret = 0;
 332
 333         switch (state) {
 334         case PM_SUSPEND_STANDBY:
 335         case PM_SUSPEND_MEM:
 336                 ret = omap2_pm_suspend();
 337                 break;
 338         default:
 339                 ret = -EINVAL;
 340         }
 341
 342         return ret;
 343 }
 344
 345 static void omap2_pm_end(void)
 346 {
 347         suspend_state = PM_SUSPEND_ON;
 348         enable_hlt();
 349 }
 350
 351 static const struct platform_suspend_ops omap_pm_ops = {
 352         .begin          = omap2_pm_begin,
 353         .enter          = omap2_pm_enter,
 354         .end            = omap2_pm_end,
 355         .valid          = suspend_valid_only_mem,
 356 };
 357 #else
 358 static const struct platform_suspend_ops __initdata omap_pm_ops;
 359 #endif /* CONFIG_SUSPEND */
 360
 361 /* XXX This function should be shareable between OMAP2xxx and OMAP3 */
 362 static int __init clkdms_setup(struct clockdomain *clkdm, void *unused)
 363 {
 364         if (clkdm->flags & CLKDM_CAN_ENABLE_AUTO)
 365                 clkdm_allow_idle(clkdm);
 366         else if (clkdm->flags & CLKDM_CAN_FORCE_SLEEP &&
 367                  atomic_read(&clkdm->usecount) == 0)
 368                 clkdm_sleep(clkdm);
 369         return 0;
 370 }
 371
 372 static void __init prcm_setup_regs(void)
 373 {
 374         int i, num_mem_banks;
 375         struct powerdomain *pwrdm;
 376
 377         /*
 378          * Enable autoidle
 379          * XXX This should be handled by hwmod code or PRCM init code
 380          */
 381         omap2_prm_write_mod_reg(OMAP24XX_AUTOIDLE_MASK, OCP_MOD,
 382                           OMAP2_PRCM_SYSCONFIG_OFFSET);
 383
 384         /*
 385          * Set CORE powerdomain memory banks to retain their contents
 386          * during RETENTION
 387          */
 388         num_mem_banks = pwrdm_get_mem_bank_count(core_pwrdm);
 389         for (i = 0; i < num_mem_banks; i++)
 390                 pwrdm_set_mem_retst(core_pwrdm, i, PWRDM_POWER_RET);
 391
 392         /* Set CORE powerdomain's next power state to RETENTION */
 393         pwrdm_set_next_pwrst(core_pwrdm, PWRDM_POWER_RET);
 394
 395         /*
 396          * Set MPU powerdomain's next power state to RETENTION;
 397          * preserve logic state during retention
 398          */
 399         pwrdm_set_logic_retst(mpu_pwrdm, PWRDM_POWER_RET);
 400         pwrdm_set_next_pwrst(mpu_pwrdm, PWRDM_POWER_RET);
 401
 402         /* Force-power down DSP, GFX powerdomains */
 403
 404         pwrdm = clkdm_get_pwrdm(dsp_clkdm);
 405         pwrdm_set_next_pwrst(pwrdm, PWRDM_POWER_OFF);
 406         clkdm_sleep(dsp_clkdm);
 407
 408         pwrdm = clkdm_get_pwrdm(gfx_clkdm);
 409         pwrdm_set_next_pwrst(pwrdm, PWRDM_POWER_OFF);
 410         clkdm_sleep(gfx_clkdm);
 411
 412         /* Enable hardware-supervised idle for all clkdms */
 413         clkdm_for_each(clkdms_setup, NULL);
 414         clkdm_add_wkdep(mpu_clkdm, wkup_clkdm);
 415
 416         /* REVISIT: Configure number of 32 kHz clock cycles for sys_clk
 417          * stabilisation */
 418         omap2_prm_write_mod_reg(15 << OMAP_SETUP_TIME_SHIFT, OMAP24XX_GR_MOD,
 419                                 OMAP2_PRCM_CLKSSETUP_OFFSET);
 420
 421         /* Configure automatic voltage transition */
 422         omap2_prm_write_mod_reg(2 << OMAP_SETUP_TIME_SHIFT, OMAP24XX_GR_MOD,
 423                                 OMAP2_PRCM_VOLTSETUP_OFFSET);
 424         omap2_prm_write_mod_reg(OMAP24XX_AUTO_EXTVOLT_MASK |
 425                                 (0x1 << OMAP24XX_SETOFF_LEVEL_SHIFT) |
 426                                 OMAP24XX_MEMRETCTRL_MASK |
 427                                 (0x1 << OMAP24XX_SETRET_LEVEL_SHIFT) |
 428                                 (0x0 << OMAP24XX_VOLT_LEVEL_SHIFT),
 429                                 OMAP24XX_GR_MOD, OMAP2_PRCM_VOLTCTRL_OFFSET);
 430
 431         /* Enable wake-up events */
 432         omap2_prm_write_mod_reg(OMAP24XX_EN_GPIOS_MASK | OMAP24XX_EN_GPT1_MASK,
 433                                 WKUP_MOD, PM_WKEN);
 434 }
 435
 436 static int __init omap2_pm_init(void)
 437 {
 438         u32 l;
 439
 440         if (!cpu_is_omap24xx())
 441                 return -ENODEV;
 442
 443         printk(KERN_INFO "Power Management for OMAP2 initializing\n");
 444         l = omap2_prm_read_mod_reg(OCP_MOD, OMAP2_PRCM_REVISION_OFFSET);
 445         printk(KERN_INFO "PRCM revision %d.%d\n", (l >> 4) & 0x0f, l & 0x0f);
 446
 447         /* Look up important powerdomains */
 448
 449         mpu_pwrdm = pwrdm_lookup("mpu_pwrdm");
 450         if (!mpu_pwrdm)
 451                 pr_err("PM: mpu_pwrdm not found\n");
 452
 453         core_pwrdm = pwrdm_lookup("core_pwrdm");
 454         if (!core_pwrdm)
 455                 pr_err("PM: core_pwrdm not found\n");
 456
 457         /* Look up important clockdomains */
 458
 459         mpu_clkdm = clkdm_lookup("mpu_clkdm");
 460         if (!mpu_clkdm)
 461                 pr_err("PM: mpu_clkdm not found\n");
 462
 463         wkup_clkdm = clkdm_lookup("wkup_clkdm");
 464         if (!wkup_clkdm)
 465                 pr_err("PM: wkup_clkdm not found\n");
 466
 467         dsp_clkdm = clkdm_lookup("dsp_clkdm");
 468         if (!dsp_clkdm)
 469                 pr_err("PM: dsp_clkdm not found\n");
 470
 471         gfx_clkdm = clkdm_lookup("gfx_clkdm");
 472         if (!gfx_clkdm)
 473                 pr_err("PM: gfx_clkdm not found\n");
 474
 475
 476         osc_ck = clk_get(NULL, "osc_ck");
 477         if (IS_ERR(osc_ck)) {
 478                 printk(KERN_ERR "could not get osc_ck\n");
 479                 return -ENODEV;
 480         }
 481
 482         if (cpu_is_omap242x()) {
 483                 emul_ck = clk_get(NULL, "emul_ck");
 484                 if (IS_ERR(emul_ck)) {
 485                         printk(KERN_ERR "could not get emul_ck\n");
 486                         clk_put(osc_ck);
 487                         return -ENODEV;
 488                 }
 489         }
 490
 491         prcm_setup_regs();
 492
 493         /* Hack to prevent MPU retention when STI console is enabled. */
 494         {
 495                 const struct omap_sti_console_config *sti;
 496
 497                 sti = omap_get_config(OMAP_TAG_STI_CONSOLE,
 498                                       struct omap_sti_console_config);
 499                 if (sti != NULL && sti->enable)
 500                         sti_console_enabled = 1;
 501         }
 502
 503         /*
 504          * We copy the assembler sleep/wakeup routines to SRAM.
 505          * These routines need to be in SRAM as that's the only
 506          * memory the MPU can see when it wakes up.
 507          */
 508         if (cpu_is_omap24xx()) {
 509                 omap2_sram_idle = omap_sram_push(omap24xx_idle_loop_suspend,
 510                                                  omap24xx_idle_loop_suspend_sz);
 511
 512                 omap2_sram_suspend = omap_sram_push(omap24xx_cpu_suspend,
 513                                                     omap24xx_cpu_suspend_sz);
 514         }
 515
 516         suspend_set_ops(&omap_pm_ops);
 517         pm_idle = omap2_pm_idle;
 518
 519         return 0;
 520 }
 521
 522 late_initcall(omap2_pm_init);