olympic: convert to seq_file
[linux-2.6/libata-dev.git] / drivers / net / tokenring / olympic.c
blobe3855aeb13d46d80528a0a247536d4f04fdd33fd
1 /*
2 * olympic.c (c) 1999 Peter De Schrijver All Rights Reserved
3 * 1999/2000 Mike Phillips (mikep@linuxtr.net)
5 * Linux driver for IBM PCI tokenring cards based on the Pit/Pit-Phy/Olympic
6 * chipset.
8 * Base Driver Skeleton:
9 * Written 1993-94 by Donald Becker.
11 * Copyright 1993 United States Government as represented by the
12 * Director, National Security Agency.
14 * Thanks to Erik De Cock, Adrian Bridgett and Frank Fiene for their
15 * assistance and perserverance with the testing of this driver.
17 * This software may be used and distributed according to the terms
18 * of the GNU General Public License, incorporated herein by reference.
20 * 4/27/99 - Alpha Release 0.1.0
21 * First release to the public
23 * 6/8/99 - Official Release 0.2.0
24 * Merged into the kernel code
25 * 8/18/99 - Updated driver for 2.3.13 kernel to use new pci
26 * resource. Driver also reports the card name returned by
27 * the pci resource.
28 * 1/11/00 - Added spinlocks for smp
29 * 2/23/00 - Updated to dev_kfree_irq
30 * 3/10/00 - Fixed FDX enable which triggered other bugs also
31 * squashed.
32 * 5/20/00 - Changes to handle Olympic on LinuxPPC. Endian changes.
33 * The odd thing about the changes is that the fix for
34 * endian issues with the big-endian data in the arb, asb...
35 * was to always swab() the bytes, no matter what CPU.
36 * That's because the read[wl]() functions always swap the
37 * bytes on the way in on PPC.
38 * Fixing the hardware descriptors was another matter,
39 * because they weren't going through read[wl](), there all
40 * the results had to be in memory in le32 values. kdaaker
42 * 12/23/00 - Added minimal Cardbus support (Thanks Donald).
44 * 03/09/01 - Add new pci api, dev_base_lock, general clean up.
46 * 03/27/01 - Add new dma pci (Thanks to Kyle Lucke) and alloc_trdev
47 * Change proc_fs behaviour, now one entry per adapter.
49 * 04/09/01 - Couple of bug fixes to the dma unmaps and ejecting the
50 * adapter when live does not take the system down with it.
52 * 06/02/01 - Clean up, copy skb for small packets
54 * 06/22/01 - Add EISR error handling routines
56 * 07/19/01 - Improve bad LAA reporting, strip out freemem
57 * into a separate function, its called from 3
58 * different places now.
59 * 02/09/02 - Replaced sleep_on.
60 * 03/01/02 - Replace access to several registers from 32 bit to
61 * 16 bit. Fixes alignment errors on PPC 64 bit machines.
62 * Thanks to Al Trautman for this one.
63 * 03/10/02 - Fix BUG in arb_cmd. Bug was there all along but was
64 * silently ignored until the error checking code
65 * went into version 1.0.0
66 * 06/04/02 - Add correct start up sequence for the cardbus adapters.
67 * Required for strict compliance with pci power mgmt specs.
68 * To Do:
70 * Wake on lan
72 * If Problems do Occur
73 * Most problems can be rectified by either closing and opening the interface
74 * (ifconfig down and up) or rmmod and insmod'ing the driver (a bit difficult
75 * if compiled into the kernel).
78 /* Change OLYMPIC_DEBUG to 1 to get verbose, and I mean really verbose, messages */
80 #define OLYMPIC_DEBUG 0
83 #include <linux/module.h>
84 #include <linux/kernel.h>
85 #include <linux/errno.h>
86 #include <linux/timer.h>
87 #include <linux/in.h>
88 #include <linux/ioport.h>
89 #include <linux/seq_file.h>
90 #include <linux/string.h>
91 #include <linux/proc_fs.h>
92 #include <linux/ptrace.h>
93 #include <linux/skbuff.h>
94 #include <linux/interrupt.h>
95 #include <linux/delay.h>
96 #include <linux/netdevice.h>
97 #include <linux/trdevice.h>
98 #include <linux/stddef.h>
99 #include <linux/init.h>
100 #include <linux/pci.h>
101 #include <linux/spinlock.h>
102 #include <linux/bitops.h>
103 #include <linux/jiffies.h>
105 #include <net/checksum.h>
106 #include <net/net_namespace.h>
108 #include <asm/io.h>
109 #include <asm/system.h>
111 #include "olympic.h"
113 /* I've got to put some intelligence into the version number so that Peter and I know
114 * which version of the code somebody has got.
115 * Version Number = a.b.c.d where a.b.c is the level of code and d is the latest author.
116 * So 0.0.1.pds = Peter, 0.0.1.mlp = Mike
118 * Official releases will only have an a.b.c version number format.
121 static char version[] =
122 "Olympic.c v1.0.5 6/04/02 - Peter De Schrijver & Mike Phillips" ;
124 static char *open_maj_error[] = {"No error", "Lobe Media Test", "Physical Insertion",
125 "Address Verification", "Neighbor Notification (Ring Poll)",
126 "Request Parameters","FDX Registration Request",
127 "FDX Duplicate Address Check", "Station registration Query Wait",
128 "Unknown stage"};
130 static char *open_min_error[] = {"No error", "Function Failure", "Signal Lost", "Wire Fault",
131 "Ring Speed Mismatch", "Timeout","Ring Failure","Ring Beaconing",
132 "Duplicate Node Address","Request Parameters","Remove Received",
133 "Reserved", "Reserved", "No Monitor Detected for RPL",
134 "Monitor Contention failer for RPL", "FDX Protocol Error"};
136 /* Module parameters */
138 MODULE_AUTHOR("Mike Phillips <mikep@linuxtr.net>") ;
139 MODULE_DESCRIPTION("Olympic PCI/Cardbus Chipset Driver") ;
141 /* Ring Speed 0,4,16,100
142 * 0 = Autosense
143 * 4,16 = Selected speed only, no autosense
144 * This allows the card to be the first on the ring
145 * and become the active monitor.
146 * 100 = Nothing at present, 100mbps is autodetected
147 * if FDX is turned on. May be implemented in the future to
148 * fail if 100mpbs is not detected.
150 * WARNING: Some hubs will allow you to insert
151 * at the wrong speed
154 static int ringspeed[OLYMPIC_MAX_ADAPTERS] = {0,} ;
155 module_param_array(ringspeed, int, NULL, 0);
157 /* Packet buffer size */
159 static int pkt_buf_sz[OLYMPIC_MAX_ADAPTERS] = {0,} ;
160 module_param_array(pkt_buf_sz, int, NULL, 0) ;
162 /* Message Level */
164 static int message_level[OLYMPIC_MAX_ADAPTERS] = {0,} ;
165 module_param_array(message_level, int, NULL, 0) ;
167 /* Change network_monitor to receive mac frames through the arb channel.
168 * Will also create a /proc/net/olympic_tr%d entry, where %d is the tr
169 * device, i.e. tr0, tr1 etc.
170 * Intended to be used to create a ring-error reporting network module
171 * i.e. it will give you the source address of beaconers on the ring
173 static int network_monitor[OLYMPIC_MAX_ADAPTERS] = {0,};
174 module_param_array(network_monitor, int, NULL, 0);
176 static DEFINE_PCI_DEVICE_TABLE(olympic_pci_tbl) = {
177 {PCI_VENDOR_ID_IBM,PCI_DEVICE_ID_IBM_TR_WAKE,PCI_ANY_ID,PCI_ANY_ID,},
178 { } /* Terminating Entry */
180 MODULE_DEVICE_TABLE(pci,olympic_pci_tbl) ;
183 static int olympic_probe(struct pci_dev *pdev, const struct pci_device_id *ent);
184 static int olympic_init(struct net_device *dev);
185 static int olympic_open(struct net_device *dev);
186 static netdev_tx_t olympic_xmit(struct sk_buff *skb,
187 struct net_device *dev);
188 static int olympic_close(struct net_device *dev);
189 static void olympic_set_rx_mode(struct net_device *dev);
190 static void olympic_freemem(struct net_device *dev) ;
191 static irqreturn_t olympic_interrupt(int irq, void *dev_id);
192 static int olympic_set_mac_address(struct net_device *dev, void *addr) ;
193 static void olympic_arb_cmd(struct net_device *dev);
194 static int olympic_change_mtu(struct net_device *dev, int mtu);
195 static void olympic_srb_bh(struct net_device *dev) ;
196 static void olympic_asb_bh(struct net_device *dev) ;
197 static const struct file_operations olympic_proc_ops;
199 static const struct net_device_ops olympic_netdev_ops = {
200 .ndo_open = olympic_open,
201 .ndo_stop = olympic_close,
202 .ndo_start_xmit = olympic_xmit,
203 .ndo_change_mtu = olympic_change_mtu,
204 .ndo_set_multicast_list = olympic_set_rx_mode,
205 .ndo_set_mac_address = olympic_set_mac_address,
208 static int __devinit olympic_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
210 struct net_device *dev ;
211 struct olympic_private *olympic_priv;
212 static int card_no = -1 ;
213 int i ;
215 card_no++ ;
217 if ((i = pci_enable_device(pdev))) {
218 return i ;
221 pci_set_master(pdev);
223 if ((i = pci_request_regions(pdev,"olympic"))) {
224 goto op_disable_dev;
227 dev = alloc_trdev(sizeof(struct olympic_private)) ;
228 if (!dev) {
229 i = -ENOMEM;
230 goto op_release_dev;
233 olympic_priv = netdev_priv(dev) ;
235 spin_lock_init(&olympic_priv->olympic_lock) ;
237 init_waitqueue_head(&olympic_priv->srb_wait);
238 init_waitqueue_head(&olympic_priv->trb_wait);
239 #if OLYMPIC_DEBUG
240 printk(KERN_INFO "pci_device: %p, dev:%p, dev->priv: %p\n", pdev, dev, netdev_priv(dev));
241 #endif
242 dev->irq=pdev->irq;
243 dev->base_addr=pci_resource_start(pdev, 0);
244 olympic_priv->olympic_card_name = pci_name(pdev);
245 olympic_priv->pdev = pdev;
246 olympic_priv->olympic_mmio = ioremap(pci_resource_start(pdev,1),256);
247 olympic_priv->olympic_lap = ioremap(pci_resource_start(pdev,2),2048);
248 if (!olympic_priv->olympic_mmio || !olympic_priv->olympic_lap) {
249 goto op_free_iomap;
252 if ((pkt_buf_sz[card_no] < 100) || (pkt_buf_sz[card_no] > 18000) )
253 olympic_priv->pkt_buf_sz = PKT_BUF_SZ ;
254 else
255 olympic_priv->pkt_buf_sz = pkt_buf_sz[card_no] ;
257 dev->mtu = olympic_priv->pkt_buf_sz - TR_HLEN ;
258 olympic_priv->olympic_ring_speed = ringspeed[card_no] ;
259 olympic_priv->olympic_message_level = message_level[card_no] ;
260 olympic_priv->olympic_network_monitor = network_monitor[card_no];
262 if ((i = olympic_init(dev))) {
263 goto op_free_iomap;
266 dev->netdev_ops = &olympic_netdev_ops;
267 SET_NETDEV_DEV(dev, &pdev->dev);
269 pci_set_drvdata(pdev,dev) ;
270 register_netdev(dev) ;
271 printk("Olympic: %s registered as: %s\n",olympic_priv->olympic_card_name,dev->name);
272 if (olympic_priv->olympic_network_monitor) { /* Must go after register_netdev as we need the device name */
273 char proc_name[20] ;
274 strcpy(proc_name,"olympic_") ;
275 strcat(proc_name,dev->name) ;
276 proc_create_data(proc_name, 0, init_net.proc_net, &olympic_proc_ops, dev);
277 printk("Olympic: Network Monitor information: /proc/%s\n",proc_name);
279 return 0 ;
281 op_free_iomap:
282 if (olympic_priv->olympic_mmio)
283 iounmap(olympic_priv->olympic_mmio);
284 if (olympic_priv->olympic_lap)
285 iounmap(olympic_priv->olympic_lap);
287 free_netdev(dev);
288 op_release_dev:
289 pci_release_regions(pdev);
291 op_disable_dev:
292 pci_disable_device(pdev);
293 return i;
296 static int olympic_init(struct net_device *dev)
298 struct olympic_private *olympic_priv;
299 u8 __iomem *olympic_mmio, *init_srb,*adapter_addr;
300 unsigned long t;
301 unsigned int uaa_addr;
303 olympic_priv=netdev_priv(dev);
304 olympic_mmio=olympic_priv->olympic_mmio;
306 printk("%s\n", version);
307 printk("%s. I/O at %hx, MMIO at %p, LAP at %p, using irq %d\n", olympic_priv->olympic_card_name, (unsigned int) dev->base_addr,olympic_priv->olympic_mmio, olympic_priv->olympic_lap, dev->irq);
309 writel(readl(olympic_mmio+BCTL) | BCTL_SOFTRESET,olympic_mmio+BCTL);
310 t=jiffies;
311 while((readl(olympic_mmio+BCTL)) & BCTL_SOFTRESET) {
312 schedule();
313 if(time_after(jiffies, t + 40*HZ)) {
314 printk(KERN_ERR "IBM PCI tokenring card not responding.\n");
315 return -ENODEV;
320 /* Needed for cardbus */
321 if(!(readl(olympic_mmio+BCTL) & BCTL_MODE_INDICATOR)) {
322 writel(readl(olympic_priv->olympic_mmio+FERMASK)|FERMASK_INT_BIT, olympic_mmio+FERMASK);
325 #if OLYMPIC_DEBUG
326 printk("BCTL: %x\n",readl(olympic_mmio+BCTL));
327 printk("GPR: %x\n",readw(olympic_mmio+GPR));
328 printk("SISRMASK: %x\n",readl(olympic_mmio+SISR_MASK));
329 #endif
330 /* Aaaahhh, You have got to be real careful setting GPR, the card
331 holds the previous values from flash memory, including autosense
332 and ring speed */
334 writel(readl(olympic_mmio+BCTL)|BCTL_MIMREB,olympic_mmio+BCTL);
336 if (olympic_priv->olympic_ring_speed == 0) { /* Autosense */
337 writew(readw(olympic_mmio+GPR)|GPR_AUTOSENSE,olympic_mmio+GPR);
338 if (olympic_priv->olympic_message_level)
339 printk(KERN_INFO "%s: Ringspeed autosense mode on\n",olympic_priv->olympic_card_name);
340 } else if (olympic_priv->olympic_ring_speed == 16) {
341 if (olympic_priv->olympic_message_level)
342 printk(KERN_INFO "%s: Trying to open at 16 Mbps as requested\n", olympic_priv->olympic_card_name);
343 writew(GPR_16MBPS, olympic_mmio+GPR);
344 } else if (olympic_priv->olympic_ring_speed == 4) {
345 if (olympic_priv->olympic_message_level)
346 printk(KERN_INFO "%s: Trying to open at 4 Mbps as requested\n", olympic_priv->olympic_card_name) ;
347 writew(0, olympic_mmio+GPR);
350 writew(readw(olympic_mmio+GPR)|GPR_NEPTUNE_BF,olympic_mmio+GPR);
352 #if OLYMPIC_DEBUG
353 printk("GPR = %x\n",readw(olympic_mmio + GPR) ) ;
354 #endif
355 /* Solo has been paused to meet the Cardbus power
356 * specs if the adapter is cardbus. Check to
357 * see its been paused and then restart solo. The
358 * adapter should set the pause bit within 1 second.
361 if(!(readl(olympic_mmio+BCTL) & BCTL_MODE_INDICATOR)) {
362 t=jiffies;
363 while (!(readl(olympic_mmio+CLKCTL) & CLKCTL_PAUSE)) {
364 schedule() ;
365 if(time_after(jiffies, t + 2*HZ)) {
366 printk(KERN_ERR "IBM Cardbus tokenring adapter not responsing.\n") ;
367 return -ENODEV;
370 writel(readl(olympic_mmio+CLKCTL) & ~CLKCTL_PAUSE, olympic_mmio+CLKCTL) ;
373 /* start solo init */
374 writel((1<<15),olympic_mmio+SISR_MASK_SUM);
376 t=jiffies;
377 while(!((readl(olympic_mmio+SISR_RR)) & SISR_SRB_REPLY)) {
378 schedule();
379 if(time_after(jiffies, t + 15*HZ)) {
380 printk(KERN_ERR "IBM PCI tokenring card not responding.\n");
381 return -ENODEV;
385 writel(readw(olympic_mmio+LAPWWO),olympic_mmio+LAPA);
387 #if OLYMPIC_DEBUG
388 printk("LAPWWO: %x, LAPA: %x\n",readl(olympic_mmio+LAPWWO), readl(olympic_mmio+LAPA));
389 #endif
391 init_srb=olympic_priv->olympic_lap + ((readw(olympic_mmio+LAPWWO)) & (~0xf800));
393 #if OLYMPIC_DEBUG
395 int i;
396 printk("init_srb(%p): ",init_srb);
397 for(i=0;i<20;i++)
398 printk("%x ",readb(init_srb+i));
399 printk("\n");
401 #endif
402 if(readw(init_srb+6)) {
403 printk(KERN_INFO "tokenring card initialization failed. errorcode : %x\n",readw(init_srb+6));
404 return -ENODEV;
407 if (olympic_priv->olympic_message_level) {
408 if ( readb(init_srb +2) & 0x40) {
409 printk(KERN_INFO "Olympic: Adapter is FDX capable.\n") ;
410 } else {
411 printk(KERN_INFO "Olympic: Adapter cannot do FDX.\n");
415 uaa_addr=swab16(readw(init_srb+8));
417 #if OLYMPIC_DEBUG
418 printk("UAA resides at %x\n",uaa_addr);
419 #endif
421 writel(uaa_addr,olympic_mmio+LAPA);
422 adapter_addr=olympic_priv->olympic_lap + (uaa_addr & (~0xf800));
424 memcpy_fromio(&dev->dev_addr[0], adapter_addr,6);
426 #if OLYMPIC_DEBUG
427 printk("adapter address: %pM\n", dev->dev_addr);
428 #endif
430 olympic_priv->olympic_addr_table_addr = swab16(readw(init_srb + 12));
431 olympic_priv->olympic_parms_addr = swab16(readw(init_srb + 14));
433 return 0;
437 static int olympic_open(struct net_device *dev)
439 struct olympic_private *olympic_priv=netdev_priv(dev);
440 u8 __iomem *olympic_mmio=olympic_priv->olympic_mmio,*init_srb;
441 unsigned long flags, t;
442 int i, open_finished = 1 ;
443 u8 resp, err;
445 DECLARE_WAITQUEUE(wait,current) ;
447 olympic_init(dev);
449 if (request_irq(dev->irq, olympic_interrupt, IRQF_SHARED , "olympic",
450 dev))
451 return -EAGAIN;
453 #if OLYMPIC_DEBUG
454 printk("BMCTL: %x\n",readl(olympic_mmio+BMCTL_SUM));
455 printk("pending ints: %x\n",readl(olympic_mmio+SISR_RR));
456 #endif
458 writel(SISR_MI,olympic_mmio+SISR_MASK_SUM);
460 writel(SISR_MI | SISR_SRB_REPLY, olympic_mmio+SISR_MASK); /* more ints later, doesn't stop arb cmd interrupt */
462 writel(LISR_LIE,olympic_mmio+LISR); /* more ints later */
464 /* adapter is closed, so SRB is pointed to by LAPWWO */
466 writel(readw(olympic_mmio+LAPWWO),olympic_mmio+LAPA);
467 init_srb=olympic_priv->olympic_lap + ((readw(olympic_mmio+LAPWWO)) & (~0xf800));
469 #if OLYMPIC_DEBUG
470 printk("LAPWWO: %x, LAPA: %x\n",readw(olympic_mmio+LAPWWO), readl(olympic_mmio+LAPA));
471 printk("SISR Mask = %04x\n", readl(olympic_mmio+SISR_MASK));
472 printk("Before the open command\n");
473 #endif
474 do {
475 memset_io(init_srb,0,SRB_COMMAND_SIZE);
477 writeb(SRB_OPEN_ADAPTER,init_srb) ; /* open */
478 writeb(OLYMPIC_CLEAR_RET_CODE,init_srb+2);
480 /* If Network Monitor, instruct card to copy MAC frames through the ARB */
481 if (olympic_priv->olympic_network_monitor)
482 writew(swab16(OPEN_ADAPTER_ENABLE_FDX | OPEN_ADAPTER_PASS_ADC_MAC | OPEN_ADAPTER_PASS_ATT_MAC | OPEN_ADAPTER_PASS_BEACON), init_srb+8);
483 else
484 writew(swab16(OPEN_ADAPTER_ENABLE_FDX), init_srb+8);
486 /* Test OR of first 3 bytes as its totally possible for
487 * someone to set the first 2 bytes to be zero, although this
488 * is an error, the first byte must have bit 6 set to 1 */
490 if (olympic_priv->olympic_laa[0] | olympic_priv->olympic_laa[1] | olympic_priv->olympic_laa[2]) {
491 writeb(olympic_priv->olympic_laa[0],init_srb+12);
492 writeb(olympic_priv->olympic_laa[1],init_srb+13);
493 writeb(olympic_priv->olympic_laa[2],init_srb+14);
494 writeb(olympic_priv->olympic_laa[3],init_srb+15);
495 writeb(olympic_priv->olympic_laa[4],init_srb+16);
496 writeb(olympic_priv->olympic_laa[5],init_srb+17);
497 memcpy(dev->dev_addr,olympic_priv->olympic_laa,dev->addr_len) ;
499 writeb(1,init_srb+30);
501 spin_lock_irqsave(&olympic_priv->olympic_lock,flags);
502 olympic_priv->srb_queued=1;
504 writel(LISR_SRB_CMD,olympic_mmio+LISR_SUM);
505 spin_unlock_irqrestore(&olympic_priv->olympic_lock,flags);
507 t = jiffies ;
509 add_wait_queue(&olympic_priv->srb_wait,&wait) ;
510 set_current_state(TASK_INTERRUPTIBLE) ;
512 while(olympic_priv->srb_queued) {
513 schedule() ;
514 if(signal_pending(current)) {
515 printk(KERN_WARNING "%s: Signal received in open.\n",
516 dev->name);
517 printk(KERN_WARNING "SISR=%x LISR=%x\n",
518 readl(olympic_mmio+SISR),
519 readl(olympic_mmio+LISR));
520 olympic_priv->srb_queued=0;
521 break;
523 if (time_after(jiffies, t + 10*HZ)) {
524 printk(KERN_WARNING "%s: SRB timed out.\n",dev->name);
525 olympic_priv->srb_queued=0;
526 break ;
528 set_current_state(TASK_INTERRUPTIBLE) ;
530 remove_wait_queue(&olympic_priv->srb_wait,&wait) ;
531 set_current_state(TASK_RUNNING) ;
532 olympic_priv->srb_queued = 0 ;
533 #if OLYMPIC_DEBUG
534 printk("init_srb(%p): ",init_srb);
535 for(i=0;i<20;i++)
536 printk("%02x ",readb(init_srb+i));
537 printk("\n");
538 #endif
540 /* If we get the same return response as we set, the interrupt wasn't raised and the open
541 * timed out.
544 switch (resp = readb(init_srb+2)) {
545 case OLYMPIC_CLEAR_RET_CODE:
546 printk(KERN_WARNING "%s: Adapter Open time out or error.\n", dev->name) ;
547 goto out;
548 case 0:
549 open_finished = 1;
550 break;
551 case 0x07:
552 if (!olympic_priv->olympic_ring_speed && open_finished) { /* Autosense , first time around */
553 printk(KERN_WARNING "%s: Retrying at different ring speed\n", dev->name);
554 open_finished = 0 ;
555 continue;
558 err = readb(init_srb+7);
560 if (!olympic_priv->olympic_ring_speed && ((err & 0x0f) == 0x0d)) {
561 printk(KERN_WARNING "%s: Tried to autosense ring speed with no monitors present\n",dev->name);
562 printk(KERN_WARNING "%s: Please try again with a specified ring speed\n",dev->name);
563 } else {
564 printk(KERN_WARNING "%s: %s - %s\n", dev->name,
565 open_maj_error[(err & 0xf0) >> 4],
566 open_min_error[(err & 0x0f)]);
568 goto out;
570 case 0x32:
571 printk(KERN_WARNING "%s: Invalid LAA: %pM\n",
572 dev->name, olympic_priv->olympic_laa);
573 goto out;
575 default:
576 printk(KERN_WARNING "%s: Bad OPEN response: %x\n", dev->name, resp);
577 goto out;
580 } while (!(open_finished)) ; /* Will only loop if ring speed mismatch re-open attempted && autosense is on */
582 if (readb(init_srb+18) & (1<<3))
583 if (olympic_priv->olympic_message_level)
584 printk(KERN_INFO "%s: Opened in FDX Mode\n",dev->name);
586 if (readb(init_srb+18) & (1<<1))
587 olympic_priv->olympic_ring_speed = 100 ;
588 else if (readb(init_srb+18) & 1)
589 olympic_priv->olympic_ring_speed = 16 ;
590 else
591 olympic_priv->olympic_ring_speed = 4 ;
593 if (olympic_priv->olympic_message_level)
594 printk(KERN_INFO "%s: Opened in %d Mbps mode\n",dev->name, olympic_priv->olympic_ring_speed);
596 olympic_priv->asb = swab16(readw(init_srb+8));
597 olympic_priv->srb = swab16(readw(init_srb+10));
598 olympic_priv->arb = swab16(readw(init_srb+12));
599 olympic_priv->trb = swab16(readw(init_srb+16));
601 olympic_priv->olympic_receive_options = 0x01 ;
602 olympic_priv->olympic_copy_all_options = 0 ;
604 /* setup rx ring */
606 writel((3<<16),olympic_mmio+BMCTL_RWM); /* Ensure end of frame generated interrupts */
608 writel(BMCTL_RX_DIS|3,olympic_mmio+BMCTL_RWM); /* Yes, this the enables RX channel */
610 for(i=0;i<OLYMPIC_RX_RING_SIZE;i++) {
612 struct sk_buff *skb;
614 skb=dev_alloc_skb(olympic_priv->pkt_buf_sz);
615 if(skb == NULL)
616 break;
618 skb->dev = dev;
620 olympic_priv->olympic_rx_ring[i].buffer = cpu_to_le32(pci_map_single(olympic_priv->pdev,
621 skb->data,olympic_priv->pkt_buf_sz, PCI_DMA_FROMDEVICE)) ;
622 olympic_priv->olympic_rx_ring[i].res_length = cpu_to_le32(olympic_priv->pkt_buf_sz);
623 olympic_priv->rx_ring_skb[i]=skb;
626 if (i==0) {
627 printk(KERN_WARNING "%s: Not enough memory to allocate rx buffers. Adapter disabled\n",dev->name);
628 goto out;
631 olympic_priv->rx_ring_dma_addr = pci_map_single(olympic_priv->pdev,olympic_priv->olympic_rx_ring,
632 sizeof(struct olympic_rx_desc) * OLYMPIC_RX_RING_SIZE, PCI_DMA_TODEVICE);
633 writel(olympic_priv->rx_ring_dma_addr, olympic_mmio+RXDESCQ);
634 writel(olympic_priv->rx_ring_dma_addr, olympic_mmio+RXCDA);
635 writew(i, olympic_mmio+RXDESCQCNT);
637 olympic_priv->rx_status_ring_dma_addr = pci_map_single(olympic_priv->pdev, olympic_priv->olympic_rx_status_ring,
638 sizeof(struct olympic_rx_status) * OLYMPIC_RX_RING_SIZE, PCI_DMA_FROMDEVICE);
639 writel(olympic_priv->rx_status_ring_dma_addr, olympic_mmio+RXSTATQ);
640 writel(olympic_priv->rx_status_ring_dma_addr, olympic_mmio+RXCSA);
642 olympic_priv->rx_ring_last_received = OLYMPIC_RX_RING_SIZE - 1; /* last processed rx status */
643 olympic_priv->rx_status_last_received = OLYMPIC_RX_RING_SIZE - 1;
645 writew(i, olympic_mmio+RXSTATQCNT);
647 #if OLYMPIC_DEBUG
648 printk("# of rx buffers: %d, RXENQ: %x\n",i, readw(olympic_mmio+RXENQ));
649 printk("RXCSA: %x, rx_status_ring[0]: %p\n",readl(olympic_mmio+RXCSA),&olympic_priv->olympic_rx_status_ring[0]);
650 printk(" stat_ring[1]: %p, stat_ring[2]: %p, stat_ring[3]: %p\n", &(olympic_priv->olympic_rx_status_ring[1]), &(olympic_priv->olympic_rx_status_ring[2]), &(olympic_priv->olympic_rx_status_ring[3]) );
651 printk(" stat_ring[4]: %p, stat_ring[5]: %p, stat_ring[6]: %p\n", &(olympic_priv->olympic_rx_status_ring[4]), &(olympic_priv->olympic_rx_status_ring[5]), &(olympic_priv->olympic_rx_status_ring[6]) );
652 printk(" stat_ring[7]: %p\n", &(olympic_priv->olympic_rx_status_ring[7]) );
654 printk("RXCDA: %x, rx_ring[0]: %p\n",readl(olympic_mmio+RXCDA),&olympic_priv->olympic_rx_ring[0]);
655 printk("Rx_ring_dma_addr = %08x, rx_status_dma_addr = %08x\n",
656 olympic_priv->rx_ring_dma_addr,olympic_priv->rx_status_ring_dma_addr) ;
657 #endif
659 writew((((readw(olympic_mmio+RXENQ)) & 0x8000) ^ 0x8000) | i,olympic_mmio+RXENQ);
661 #if OLYMPIC_DEBUG
662 printk("# of rx buffers: %d, RXENQ: %x\n",i, readw(olympic_mmio+RXENQ));
663 printk("RXCSA: %x, rx_ring[0]: %p\n",readl(olympic_mmio+RXCSA),&olympic_priv->olympic_rx_status_ring[0]);
664 printk("RXCDA: %x, rx_ring[0]: %p\n",readl(olympic_mmio+RXCDA),&olympic_priv->olympic_rx_ring[0]);
665 #endif
667 writel(SISR_RX_STATUS | SISR_RX_NOBUF,olympic_mmio+SISR_MASK_SUM);
669 /* setup tx ring */
671 writel(BMCTL_TX1_DIS,olympic_mmio+BMCTL_RWM); /* Yes, this enables TX channel 1 */
672 for(i=0;i<OLYMPIC_TX_RING_SIZE;i++)
673 olympic_priv->olympic_tx_ring[i].buffer=cpu_to_le32(0xdeadbeef);
675 olympic_priv->free_tx_ring_entries=OLYMPIC_TX_RING_SIZE;
676 olympic_priv->tx_ring_dma_addr = pci_map_single(olympic_priv->pdev,olympic_priv->olympic_tx_ring,
677 sizeof(struct olympic_tx_desc) * OLYMPIC_TX_RING_SIZE,PCI_DMA_TODEVICE) ;
678 writel(olympic_priv->tx_ring_dma_addr, olympic_mmio+TXDESCQ_1);
679 writel(olympic_priv->tx_ring_dma_addr, olympic_mmio+TXCDA_1);
680 writew(OLYMPIC_TX_RING_SIZE, olympic_mmio+TXDESCQCNT_1);
682 olympic_priv->tx_status_ring_dma_addr = pci_map_single(olympic_priv->pdev, olympic_priv->olympic_tx_status_ring,
683 sizeof(struct olympic_tx_status) * OLYMPIC_TX_RING_SIZE, PCI_DMA_FROMDEVICE);
684 writel(olympic_priv->tx_status_ring_dma_addr,olympic_mmio+TXSTATQ_1);
685 writel(olympic_priv->tx_status_ring_dma_addr,olympic_mmio+TXCSA_1);
686 writew(OLYMPIC_TX_RING_SIZE,olympic_mmio+TXSTATQCNT_1);
688 olympic_priv->tx_ring_free=0; /* next entry in tx ring to use */
689 olympic_priv->tx_ring_last_status=OLYMPIC_TX_RING_SIZE-1; /* last processed tx status */
691 writel(0xffffffff, olympic_mmio+EISR_RWM) ; /* clean the eisr */
692 writel(0,olympic_mmio+EISR) ;
693 writel(EISR_MASK_OPTIONS,olympic_mmio+EISR_MASK) ; /* enables most of the TX error interrupts */
694 writel(SISR_TX1_EOF | SISR_ADAPTER_CHECK | SISR_ARB_CMD | SISR_TRB_REPLY | SISR_ASB_FREE | SISR_ERR,olympic_mmio+SISR_MASK_SUM);
696 #if OLYMPIC_DEBUG
697 printk("BMCTL: %x\n",readl(olympic_mmio+BMCTL_SUM));
698 printk("SISR MASK: %x\n",readl(olympic_mmio+SISR_MASK));
699 #endif
701 if (olympic_priv->olympic_network_monitor) {
702 u8 __iomem *oat;
703 u8 __iomem *opt;
704 u8 addr[6];
705 oat = (olympic_priv->olympic_lap + olympic_priv->olympic_addr_table_addr);
706 opt = (olympic_priv->olympic_lap + olympic_priv->olympic_parms_addr);
708 for (i = 0; i < 6; i++)
709 addr[i] = readb(oat+offsetof(struct olympic_adapter_addr_table,node_addr)+i);
710 printk("%s: Node Address: %pM\n", dev->name, addr);
711 printk("%s: Functional Address: %02x:%02x:%02x:%02x\n",dev->name,
712 readb(oat+offsetof(struct olympic_adapter_addr_table,func_addr)),
713 readb(oat+offsetof(struct olympic_adapter_addr_table,func_addr)+1),
714 readb(oat+offsetof(struct olympic_adapter_addr_table,func_addr)+2),
715 readb(oat+offsetof(struct olympic_adapter_addr_table,func_addr)+3));
717 for (i = 0; i < 6; i++)
718 addr[i] = readb(opt+offsetof(struct olympic_parameters_table, up_node_addr)+i);
719 printk("%s: NAUN Address: %pM\n", dev->name, addr);
722 netif_start_queue(dev);
723 return 0;
725 out:
726 free_irq(dev->irq, dev);
727 return -EIO;
731 * When we enter the rx routine we do not know how many frames have been
732 * queued on the rx channel. Therefore we start at the next rx status
733 * position and travel around the receive ring until we have completed
734 * all the frames.
736 * This means that we may process the frame before we receive the end
737 * of frame interrupt. This is why we always test the status instead
738 * of blindly processing the next frame.
740 * We also remove the last 4 bytes from the packet as well, these are
741 * just token ring trailer info and upset protocols that don't check
742 * their own length, i.e. SNA.
745 static void olympic_rx(struct net_device *dev)
747 struct olympic_private *olympic_priv=netdev_priv(dev);
748 u8 __iomem *olympic_mmio=olympic_priv->olympic_mmio;
749 struct olympic_rx_status *rx_status;
750 struct olympic_rx_desc *rx_desc ;
751 int rx_ring_last_received,length, buffer_cnt, cpy_length, frag_len;
752 struct sk_buff *skb, *skb2;
753 int i;
755 rx_status=&(olympic_priv->olympic_rx_status_ring[(olympic_priv->rx_status_last_received + 1) & (OLYMPIC_RX_RING_SIZE - 1)]) ;
757 while (rx_status->status_buffercnt) {
758 u32 l_status_buffercnt;
760 olympic_priv->rx_status_last_received++ ;
761 olympic_priv->rx_status_last_received &= (OLYMPIC_RX_RING_SIZE -1);
762 #if OLYMPIC_DEBUG
763 printk("rx status: %x rx len: %x\n", le32_to_cpu(rx_status->status_buffercnt), le32_to_cpu(rx_status->fragmentcnt_framelen));
764 #endif
765 length = le32_to_cpu(rx_status->fragmentcnt_framelen) & 0xffff;
766 buffer_cnt = le32_to_cpu(rx_status->status_buffercnt) & 0xffff;
767 i = buffer_cnt ; /* Need buffer_cnt later for rxenq update */
768 frag_len = le32_to_cpu(rx_status->fragmentcnt_framelen) >> 16;
770 #if OLYMPIC_DEBUG
771 printk("length: %x, frag_len: %x, buffer_cnt: %x\n", length, frag_len, buffer_cnt);
772 #endif
773 l_status_buffercnt = le32_to_cpu(rx_status->status_buffercnt);
774 if(l_status_buffercnt & 0xC0000000) {
775 if (l_status_buffercnt & 0x3B000000) {
776 if (olympic_priv->olympic_message_level) {
777 if (l_status_buffercnt & (1<<29)) /* Rx Frame Truncated */
778 printk(KERN_WARNING "%s: Rx Frame Truncated\n",dev->name);
779 if (l_status_buffercnt & (1<<28)) /*Rx receive overrun */
780 printk(KERN_WARNING "%s: Rx Frame Receive overrun\n",dev->name);
781 if (l_status_buffercnt & (1<<27)) /* No receive buffers */
782 printk(KERN_WARNING "%s: No receive buffers\n",dev->name);
783 if (l_status_buffercnt & (1<<25)) /* Receive frame error detect */
784 printk(KERN_WARNING "%s: Receive frame error detect\n",dev->name);
785 if (l_status_buffercnt & (1<<24)) /* Received Error Detect */
786 printk(KERN_WARNING "%s: Received Error Detect\n",dev->name);
788 olympic_priv->rx_ring_last_received += i ;
789 olympic_priv->rx_ring_last_received &= (OLYMPIC_RX_RING_SIZE -1) ;
790 dev->stats.rx_errors++;
791 } else {
793 if (buffer_cnt == 1) {
794 skb = dev_alloc_skb(max_t(int, olympic_priv->pkt_buf_sz,length)) ;
795 } else {
796 skb = dev_alloc_skb(length) ;
799 if (skb == NULL) {
800 printk(KERN_WARNING "%s: Not enough memory to copy packet to upper layers.\n",dev->name) ;
801 dev->stats.rx_dropped++;
802 /* Update counters even though we don't transfer the frame */
803 olympic_priv->rx_ring_last_received += i ;
804 olympic_priv->rx_ring_last_received &= (OLYMPIC_RX_RING_SIZE -1) ;
805 } else {
806 /* Optimise based upon number of buffers used.
807 If only one buffer is used we can simply swap the buffers around.
808 If more than one then we must use the new buffer and copy the information
809 first. Ideally all frames would be in a single buffer, this can be tuned by
810 altering the buffer size. If the length of the packet is less than
811 1500 bytes we're going to copy it over anyway to stop packets getting
812 dropped from sockets with buffers smaller than our pkt_buf_sz. */
814 if (buffer_cnt==1) {
815 olympic_priv->rx_ring_last_received++ ;
816 olympic_priv->rx_ring_last_received &= (OLYMPIC_RX_RING_SIZE -1);
817 rx_ring_last_received = olympic_priv->rx_ring_last_received ;
818 if (length > 1500) {
819 skb2=olympic_priv->rx_ring_skb[rx_ring_last_received] ;
820 /* unmap buffer */
821 pci_unmap_single(olympic_priv->pdev,
822 le32_to_cpu(olympic_priv->olympic_rx_ring[rx_ring_last_received].buffer),
823 olympic_priv->pkt_buf_sz,PCI_DMA_FROMDEVICE) ;
824 skb_put(skb2,length-4);
825 skb2->protocol = tr_type_trans(skb2,dev);
826 olympic_priv->olympic_rx_ring[rx_ring_last_received].buffer =
827 cpu_to_le32(pci_map_single(olympic_priv->pdev, skb->data,
828 olympic_priv->pkt_buf_sz, PCI_DMA_FROMDEVICE));
829 olympic_priv->olympic_rx_ring[rx_ring_last_received].res_length =
830 cpu_to_le32(olympic_priv->pkt_buf_sz);
831 olympic_priv->rx_ring_skb[rx_ring_last_received] = skb ;
832 netif_rx(skb2) ;
833 } else {
834 pci_dma_sync_single_for_cpu(olympic_priv->pdev,
835 le32_to_cpu(olympic_priv->olympic_rx_ring[rx_ring_last_received].buffer),
836 olympic_priv->pkt_buf_sz,PCI_DMA_FROMDEVICE) ;
837 skb_copy_from_linear_data(olympic_priv->rx_ring_skb[rx_ring_last_received],
838 skb_put(skb,length - 4),
839 length - 4);
840 pci_dma_sync_single_for_device(olympic_priv->pdev,
841 le32_to_cpu(olympic_priv->olympic_rx_ring[rx_ring_last_received].buffer),
842 olympic_priv->pkt_buf_sz,PCI_DMA_FROMDEVICE) ;
843 skb->protocol = tr_type_trans(skb,dev) ;
844 netif_rx(skb) ;
846 } else {
847 do { /* Walk the buffers */
848 olympic_priv->rx_ring_last_received++ ;
849 olympic_priv->rx_ring_last_received &= (OLYMPIC_RX_RING_SIZE -1);
850 rx_ring_last_received = olympic_priv->rx_ring_last_received ;
851 pci_dma_sync_single_for_cpu(olympic_priv->pdev,
852 le32_to_cpu(olympic_priv->olympic_rx_ring[rx_ring_last_received].buffer),
853 olympic_priv->pkt_buf_sz,PCI_DMA_FROMDEVICE) ;
854 rx_desc = &(olympic_priv->olympic_rx_ring[rx_ring_last_received]);
855 cpy_length = (i == 1 ? frag_len : le32_to_cpu(rx_desc->res_length));
856 skb_copy_from_linear_data(olympic_priv->rx_ring_skb[rx_ring_last_received],
857 skb_put(skb, cpy_length),
858 cpy_length);
859 pci_dma_sync_single_for_device(olympic_priv->pdev,
860 le32_to_cpu(olympic_priv->olympic_rx_ring[rx_ring_last_received].buffer),
861 olympic_priv->pkt_buf_sz,PCI_DMA_FROMDEVICE) ;
862 } while (--i) ;
863 skb_trim(skb,skb->len-4) ;
864 skb->protocol = tr_type_trans(skb,dev);
865 netif_rx(skb) ;
867 dev->stats.rx_packets++ ;
868 dev->stats.rx_bytes += length ;
869 } /* if skb == null */
870 } /* If status & 0x3b */
872 } else { /*if buffercnt & 0xC */
873 olympic_priv->rx_ring_last_received += i ;
874 olympic_priv->rx_ring_last_received &= (OLYMPIC_RX_RING_SIZE - 1) ;
877 rx_status->fragmentcnt_framelen = 0 ;
878 rx_status->status_buffercnt = 0 ;
879 rx_status = &(olympic_priv->olympic_rx_status_ring[(olympic_priv->rx_status_last_received+1) & (OLYMPIC_RX_RING_SIZE -1) ]);
881 writew((((readw(olympic_mmio+RXENQ)) & 0x8000) ^ 0x8000) | buffer_cnt , olympic_mmio+RXENQ);
882 } /* while */
886 static void olympic_freemem(struct net_device *dev)
888 struct olympic_private *olympic_priv=netdev_priv(dev);
889 int i;
891 for(i=0;i<OLYMPIC_RX_RING_SIZE;i++) {
892 if (olympic_priv->rx_ring_skb[olympic_priv->rx_status_last_received] != NULL) {
893 dev_kfree_skb_irq(olympic_priv->rx_ring_skb[olympic_priv->rx_status_last_received]);
894 olympic_priv->rx_ring_skb[olympic_priv->rx_status_last_received] = NULL;
896 if (olympic_priv->olympic_rx_ring[olympic_priv->rx_status_last_received].buffer != cpu_to_le32(0xdeadbeef)) {
897 pci_unmap_single(olympic_priv->pdev,
898 le32_to_cpu(olympic_priv->olympic_rx_ring[olympic_priv->rx_status_last_received].buffer),
899 olympic_priv->pkt_buf_sz, PCI_DMA_FROMDEVICE);
901 olympic_priv->rx_status_last_received++;
902 olympic_priv->rx_status_last_received&=OLYMPIC_RX_RING_SIZE-1;
904 /* unmap rings */
905 pci_unmap_single(olympic_priv->pdev, olympic_priv->rx_status_ring_dma_addr,
906 sizeof(struct olympic_rx_status) * OLYMPIC_RX_RING_SIZE, PCI_DMA_FROMDEVICE);
907 pci_unmap_single(olympic_priv->pdev, olympic_priv->rx_ring_dma_addr,
908 sizeof(struct olympic_rx_desc) * OLYMPIC_RX_RING_SIZE, PCI_DMA_TODEVICE);
910 pci_unmap_single(olympic_priv->pdev, olympic_priv->tx_status_ring_dma_addr,
911 sizeof(struct olympic_tx_status) * OLYMPIC_TX_RING_SIZE, PCI_DMA_FROMDEVICE);
912 pci_unmap_single(olympic_priv->pdev, olympic_priv->tx_ring_dma_addr,
913 sizeof(struct olympic_tx_desc) * OLYMPIC_TX_RING_SIZE, PCI_DMA_TODEVICE);
915 return ;
918 static irqreturn_t olympic_interrupt(int irq, void *dev_id)
920 struct net_device *dev= (struct net_device *)dev_id;
921 struct olympic_private *olympic_priv=netdev_priv(dev);
922 u8 __iomem *olympic_mmio=olympic_priv->olympic_mmio;
923 u32 sisr;
924 u8 __iomem *adapter_check_area ;
927 * Read sisr but don't reset it yet.
928 * The indication bit may have been set but the interrupt latch
929 * bit may not be set, so we'd lose the interrupt later.
931 sisr=readl(olympic_mmio+SISR) ;
932 if (!(sisr & SISR_MI)) /* Interrupt isn't for us */
933 return IRQ_NONE;
934 sisr=readl(olympic_mmio+SISR_RR) ; /* Read & Reset sisr */
936 spin_lock(&olympic_priv->olympic_lock);
938 /* Hotswap gives us this on removal */
939 if (sisr == 0xffffffff) {
940 printk(KERN_WARNING "%s: Hotswap adapter removal.\n",dev->name) ;
941 spin_unlock(&olympic_priv->olympic_lock) ;
942 return IRQ_NONE;
945 if (sisr & (SISR_SRB_REPLY | SISR_TX1_EOF | SISR_RX_STATUS | SISR_ADAPTER_CHECK |
946 SISR_ASB_FREE | SISR_ARB_CMD | SISR_TRB_REPLY | SISR_RX_NOBUF | SISR_ERR)) {
948 /* If we ever get this the adapter is seriously dead. Only a reset is going to
949 * bring it back to life. We're talking pci bus errors and such like :( */
950 if((sisr & SISR_ERR) && (readl(olympic_mmio+EISR) & EISR_MASK_OPTIONS)) {
951 printk(KERN_ERR "Olympic: EISR Error, EISR=%08x\n",readl(olympic_mmio+EISR)) ;
952 printk(KERN_ERR "The adapter must be reset to clear this condition.\n") ;
953 printk(KERN_ERR "Please report this error to the driver maintainer and/\n") ;
954 printk(KERN_ERR "or the linux-tr mailing list.\n") ;
955 wake_up_interruptible(&olympic_priv->srb_wait);
956 spin_unlock(&olympic_priv->olympic_lock) ;
957 return IRQ_HANDLED;
958 } /* SISR_ERR */
960 if(sisr & SISR_SRB_REPLY) {
961 if(olympic_priv->srb_queued==1) {
962 wake_up_interruptible(&olympic_priv->srb_wait);
963 } else if (olympic_priv->srb_queued==2) {
964 olympic_srb_bh(dev) ;
966 olympic_priv->srb_queued=0;
967 } /* SISR_SRB_REPLY */
969 /* We shouldn't ever miss the Tx interrupt, but the you never know, hence the loop to ensure
970 we get all tx completions. */
971 if (sisr & SISR_TX1_EOF) {
972 while(olympic_priv->olympic_tx_status_ring[(olympic_priv->tx_ring_last_status + 1) & (OLYMPIC_TX_RING_SIZE-1)].status) {
973 olympic_priv->tx_ring_last_status++;
974 olympic_priv->tx_ring_last_status &= (OLYMPIC_TX_RING_SIZE-1);
975 olympic_priv->free_tx_ring_entries++;
976 dev->stats.tx_bytes += olympic_priv->tx_ring_skb[olympic_priv->tx_ring_last_status]->len;
977 dev->stats.tx_packets++ ;
978 pci_unmap_single(olympic_priv->pdev,
979 le32_to_cpu(olympic_priv->olympic_tx_ring[olympic_priv->tx_ring_last_status].buffer),
980 olympic_priv->tx_ring_skb[olympic_priv->tx_ring_last_status]->len,PCI_DMA_TODEVICE);
981 dev_kfree_skb_irq(olympic_priv->tx_ring_skb[olympic_priv->tx_ring_last_status]);
982 olympic_priv->olympic_tx_ring[olympic_priv->tx_ring_last_status].buffer=cpu_to_le32(0xdeadbeef);
983 olympic_priv->olympic_tx_status_ring[olympic_priv->tx_ring_last_status].status=0;
985 netif_wake_queue(dev);
986 } /* SISR_TX1_EOF */
988 if (sisr & SISR_RX_STATUS) {
989 olympic_rx(dev);
990 } /* SISR_RX_STATUS */
992 if (sisr & SISR_ADAPTER_CHECK) {
993 netif_stop_queue(dev);
994 printk(KERN_WARNING "%s: Adapter Check Interrupt Raised, 8 bytes of information follow:\n", dev->name);
995 writel(readl(olympic_mmio+LAPWWC),olympic_mmio+LAPA);
996 adapter_check_area = olympic_priv->olympic_lap + ((readl(olympic_mmio+LAPWWC)) & (~0xf800)) ;
997 printk(KERN_WARNING "%s: Bytes %02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x\n",dev->name, readb(adapter_check_area+0), readb(adapter_check_area+1), readb(adapter_check_area+2), readb(adapter_check_area+3), readb(adapter_check_area+4), readb(adapter_check_area+5), readb(adapter_check_area+6), readb(adapter_check_area+7)) ;
998 spin_unlock(&olympic_priv->olympic_lock) ;
999 return IRQ_HANDLED;
1000 } /* SISR_ADAPTER_CHECK */
1002 if (sisr & SISR_ASB_FREE) {
1003 /* Wake up anything that is waiting for the asb response */
1004 if (olympic_priv->asb_queued) {
1005 olympic_asb_bh(dev) ;
1007 } /* SISR_ASB_FREE */
1009 if (sisr & SISR_ARB_CMD) {
1010 olympic_arb_cmd(dev) ;
1011 } /* SISR_ARB_CMD */
1013 if (sisr & SISR_TRB_REPLY) {
1014 /* Wake up anything that is waiting for the trb response */
1015 if (olympic_priv->trb_queued) {
1016 wake_up_interruptible(&olympic_priv->trb_wait);
1018 olympic_priv->trb_queued = 0 ;
1019 } /* SISR_TRB_REPLY */
1021 if (sisr & SISR_RX_NOBUF) {
1022 /* According to the documentation, we don't have to do anything, but trapping it keeps it out of
1023 /var/log/messages. */
1024 } /* SISR_RX_NOBUF */
1025 } else {
1026 printk(KERN_WARNING "%s: Unexpected interrupt: %x\n",dev->name, sisr);
1027 printk(KERN_WARNING "%s: SISR_MASK: %x\n",dev->name, readl(olympic_mmio+SISR_MASK)) ;
1028 } /* One if the interrupts we want */
1029 writel(SISR_MI,olympic_mmio+SISR_MASK_SUM);
1031 spin_unlock(&olympic_priv->olympic_lock) ;
1032 return IRQ_HANDLED;
1035 static netdev_tx_t olympic_xmit(struct sk_buff *skb,
1036 struct net_device *dev)
1038 struct olympic_private *olympic_priv=netdev_priv(dev);
1039 u8 __iomem *olympic_mmio=olympic_priv->olympic_mmio;
1040 unsigned long flags ;
1042 spin_lock_irqsave(&olympic_priv->olympic_lock, flags);
1044 netif_stop_queue(dev);
1046 if(olympic_priv->free_tx_ring_entries) {
1047 olympic_priv->olympic_tx_ring[olympic_priv->tx_ring_free].buffer =
1048 cpu_to_le32(pci_map_single(olympic_priv->pdev, skb->data, skb->len,PCI_DMA_TODEVICE));
1049 olympic_priv->olympic_tx_ring[olympic_priv->tx_ring_free].status_length = cpu_to_le32(skb->len | (0x80000000));
1050 olympic_priv->tx_ring_skb[olympic_priv->tx_ring_free]=skb;
1051 olympic_priv->free_tx_ring_entries--;
1053 olympic_priv->tx_ring_free++;
1054 olympic_priv->tx_ring_free &= (OLYMPIC_TX_RING_SIZE-1);
1055 writew((((readw(olympic_mmio+TXENQ_1)) & 0x8000) ^ 0x8000) | 1,olympic_mmio+TXENQ_1);
1056 netif_wake_queue(dev);
1057 spin_unlock_irqrestore(&olympic_priv->olympic_lock,flags);
1058 return NETDEV_TX_OK;
1059 } else {
1060 spin_unlock_irqrestore(&olympic_priv->olympic_lock,flags);
1061 return NETDEV_TX_BUSY;
1067 static int olympic_close(struct net_device *dev)
1069 struct olympic_private *olympic_priv=netdev_priv(dev);
1070 u8 __iomem *olympic_mmio=olympic_priv->olympic_mmio,*srb;
1071 unsigned long t,flags;
1073 DECLARE_WAITQUEUE(wait,current) ;
1075 netif_stop_queue(dev);
1077 writel(olympic_priv->srb,olympic_mmio+LAPA);
1078 srb=olympic_priv->olympic_lap + (olympic_priv->srb & (~0xf800));
1080 writeb(SRB_CLOSE_ADAPTER,srb+0);
1081 writeb(0,srb+1);
1082 writeb(OLYMPIC_CLEAR_RET_CODE,srb+2);
1084 add_wait_queue(&olympic_priv->srb_wait,&wait) ;
1085 set_current_state(TASK_INTERRUPTIBLE) ;
1087 spin_lock_irqsave(&olympic_priv->olympic_lock,flags);
1088 olympic_priv->srb_queued=1;
1090 writel(LISR_SRB_CMD,olympic_mmio+LISR_SUM);
1091 spin_unlock_irqrestore(&olympic_priv->olympic_lock,flags);
1093 while(olympic_priv->srb_queued) {
1095 t = schedule_timeout_interruptible(60*HZ);
1097 if(signal_pending(current)) {
1098 printk(KERN_WARNING "%s: SRB timed out.\n",dev->name);
1099 printk(KERN_WARNING "SISR=%x MISR=%x\n",readl(olympic_mmio+SISR),readl(olympic_mmio+LISR));
1100 olympic_priv->srb_queued=0;
1101 break;
1104 if (t == 0) {
1105 printk(KERN_WARNING "%s: SRB timed out. May not be fatal.\n",dev->name);
1107 olympic_priv->srb_queued=0;
1109 remove_wait_queue(&olympic_priv->srb_wait,&wait) ;
1111 olympic_priv->rx_status_last_received++;
1112 olympic_priv->rx_status_last_received&=OLYMPIC_RX_RING_SIZE-1;
1114 olympic_freemem(dev) ;
1116 /* reset tx/rx fifo's and busmaster logic */
1118 writel(readl(olympic_mmio+BCTL)|(3<<13),olympic_mmio+BCTL);
1119 udelay(1);
1120 writel(readl(olympic_mmio+BCTL)&~(3<<13),olympic_mmio+BCTL);
1122 #if OLYMPIC_DEBUG
1124 int i ;
1125 printk("srb(%p): ",srb);
1126 for(i=0;i<4;i++)
1127 printk("%x ",readb(srb+i));
1128 printk("\n");
1130 #endif
1131 free_irq(dev->irq,dev);
1133 return 0;
1137 static void olympic_set_rx_mode(struct net_device *dev)
1139 struct olympic_private *olympic_priv = netdev_priv(dev);
1140 u8 __iomem *olympic_mmio = olympic_priv->olympic_mmio ;
1141 u8 options = 0;
1142 u8 __iomem *srb;
1143 struct netdev_hw_addr *ha;
1144 unsigned char dev_mc_address[4] ;
1146 writel(olympic_priv->srb,olympic_mmio+LAPA);
1147 srb=olympic_priv->olympic_lap + (olympic_priv->srb & (~0xf800));
1148 options = olympic_priv->olympic_copy_all_options;
1150 if (dev->flags&IFF_PROMISC)
1151 options |= 0x61 ;
1152 else
1153 options &= ~0x61 ;
1155 /* Only issue the srb if there is a change in options */
1157 if ((options ^ olympic_priv->olympic_copy_all_options)) {
1159 /* Now to issue the srb command to alter the copy.all.options */
1161 writeb(SRB_MODIFY_RECEIVE_OPTIONS,srb);
1162 writeb(0,srb+1);
1163 writeb(OLYMPIC_CLEAR_RET_CODE,srb+2);
1164 writeb(0,srb+3);
1165 writeb(olympic_priv->olympic_receive_options,srb+4);
1166 writeb(options,srb+5);
1168 olympic_priv->srb_queued=2; /* Can't sleep, use srb_bh */
1170 writel(LISR_SRB_CMD,olympic_mmio+LISR_SUM);
1172 olympic_priv->olympic_copy_all_options = options ;
1174 return ;
1177 /* Set the functional addresses we need for multicast */
1179 dev_mc_address[0] = dev_mc_address[1] = dev_mc_address[2] = dev_mc_address[3] = 0 ;
1181 netdev_for_each_mc_addr(ha, dev) {
1182 dev_mc_address[0] |= ha->addr[2];
1183 dev_mc_address[1] |= ha->addr[3];
1184 dev_mc_address[2] |= ha->addr[4];
1185 dev_mc_address[3] |= ha->addr[5];
1188 writeb(SRB_SET_FUNC_ADDRESS,srb+0);
1189 writeb(0,srb+1);
1190 writeb(OLYMPIC_CLEAR_RET_CODE,srb+2);
1191 writeb(0,srb+3);
1192 writeb(0,srb+4);
1193 writeb(0,srb+5);
1194 writeb(dev_mc_address[0],srb+6);
1195 writeb(dev_mc_address[1],srb+7);
1196 writeb(dev_mc_address[2],srb+8);
1197 writeb(dev_mc_address[3],srb+9);
1199 olympic_priv->srb_queued = 2 ;
1200 writel(LISR_SRB_CMD,olympic_mmio+LISR_SUM);
1204 static void olympic_srb_bh(struct net_device *dev)
1206 struct olympic_private *olympic_priv = netdev_priv(dev);
1207 u8 __iomem *olympic_mmio = olympic_priv->olympic_mmio ;
1208 u8 __iomem *srb;
1210 writel(olympic_priv->srb,olympic_mmio+LAPA);
1211 srb=olympic_priv->olympic_lap + (olympic_priv->srb & (~0xf800));
1213 switch (readb(srb)) {
1215 /* SRB_MODIFY_RECEIVE_OPTIONS i.e. set_multicast_list options (promiscuous)
1216 * At some point we should do something if we get an error, such as
1217 * resetting the IFF_PROMISC flag in dev
1220 case SRB_MODIFY_RECEIVE_OPTIONS:
1221 switch (readb(srb+2)) {
1222 case 0x01:
1223 printk(KERN_WARNING "%s: Unrecognized srb command\n",dev->name) ;
1224 break ;
1225 case 0x04:
1226 printk(KERN_WARNING "%s: Adapter must be open for this operation, doh!!\n",dev->name);
1227 break ;
1228 default:
1229 if (olympic_priv->olympic_message_level)
1230 printk(KERN_WARNING "%s: Receive Options Modified to %x,%x\n",dev->name,olympic_priv->olympic_copy_all_options, olympic_priv->olympic_receive_options) ;
1231 break ;
1232 } /* switch srb[2] */
1233 break ;
1235 /* SRB_SET_GROUP_ADDRESS - Multicast group setting
1238 case SRB_SET_GROUP_ADDRESS:
1239 switch (readb(srb+2)) {
1240 case 0x00:
1241 break ;
1242 case 0x01:
1243 printk(KERN_WARNING "%s: Unrecognized srb command\n",dev->name);
1244 break ;
1245 case 0x04:
1246 printk(KERN_WARNING "%s: Adapter must be open for this operation, doh!!\n",dev->name);
1247 break ;
1248 case 0x3c:
1249 printk(KERN_WARNING "%s: Group/Functional address indicator bits not set correctly\n",dev->name) ;
1250 break ;
1251 case 0x3e: /* If we ever implement individual multicast addresses, will need to deal with this */
1252 printk(KERN_WARNING "%s: Group address registers full\n",dev->name) ;
1253 break ;
1254 case 0x55:
1255 printk(KERN_INFO "%s: Group Address already set.\n",dev->name) ;
1256 break ;
1257 default:
1258 break ;
1259 } /* switch srb[2] */
1260 break ;
1262 /* SRB_RESET_GROUP_ADDRESS - Remove a multicast address from group list
1265 case SRB_RESET_GROUP_ADDRESS:
1266 switch (readb(srb+2)) {
1267 case 0x00:
1268 break ;
1269 case 0x01:
1270 printk(KERN_WARNING "%s: Unrecognized srb command\n",dev->name);
1271 break ;
1272 case 0x04:
1273 printk(KERN_WARNING "%s: Adapter must be open for this operation, doh!!\n",dev->name) ;
1274 break ;
1275 case 0x39: /* Must deal with this if individual multicast addresses used */
1276 printk(KERN_INFO "%s: Group address not found\n",dev->name);
1277 break ;
1278 default:
1279 break ;
1280 } /* switch srb[2] */
1281 break ;
1284 /* SRB_SET_FUNC_ADDRESS - Called by the set_rx_mode
1287 case SRB_SET_FUNC_ADDRESS:
1288 switch (readb(srb+2)) {
1289 case 0x00:
1290 if (olympic_priv->olympic_message_level)
1291 printk(KERN_INFO "%s: Functional Address Mask Set\n",dev->name);
1292 break ;
1293 case 0x01:
1294 printk(KERN_WARNING "%s: Unrecognized srb command\n",dev->name);
1295 break ;
1296 case 0x04:
1297 printk(KERN_WARNING "%s: Adapter must be open for this operation, doh!!\n",dev->name) ;
1298 break ;
1299 default:
1300 break ;
1301 } /* switch srb[2] */
1302 break ;
1304 /* SRB_READ_LOG - Read and reset the adapter error counters
1307 case SRB_READ_LOG:
1308 switch (readb(srb+2)) {
1309 case 0x00:
1310 if (olympic_priv->olympic_message_level)
1311 printk(KERN_INFO "%s: Read Log issued\n",dev->name) ;
1312 break ;
1313 case 0x01:
1314 printk(KERN_WARNING "%s: Unrecognized srb command\n",dev->name);
1315 break ;
1316 case 0x04:
1317 printk(KERN_WARNING "%s: Adapter must be open for this operation, doh!!\n",dev->name) ;
1318 break ;
1320 } /* switch srb[2] */
1321 break ;
1323 /* SRB_READ_SR_COUNTERS - Read and reset the source routing bridge related counters */
1325 case SRB_READ_SR_COUNTERS:
1326 switch (readb(srb+2)) {
1327 case 0x00:
1328 if (olympic_priv->olympic_message_level)
1329 printk(KERN_INFO "%s: Read Source Routing Counters issued\n",dev->name) ;
1330 break ;
1331 case 0x01:
1332 printk(KERN_WARNING "%s: Unrecognized srb command\n",dev->name);
1333 break ;
1334 case 0x04:
1335 printk(KERN_WARNING "%s: Adapter must be open for this operation, doh!!\n",dev->name) ;
1336 break ;
1337 default:
1338 break ;
1339 } /* switch srb[2] */
1340 break ;
1342 default:
1343 printk(KERN_WARNING "%s: Unrecognized srb bh return value.\n",dev->name);
1344 break ;
1345 } /* switch srb[0] */
1349 static int olympic_set_mac_address (struct net_device *dev, void *addr)
1351 struct sockaddr *saddr = addr ;
1352 struct olympic_private *olympic_priv = netdev_priv(dev);
1354 if (netif_running(dev)) {
1355 printk(KERN_WARNING "%s: Cannot set mac/laa address while card is open\n", dev->name) ;
1356 return -EIO ;
1359 memcpy(olympic_priv->olympic_laa, saddr->sa_data,dev->addr_len) ;
1361 if (olympic_priv->olympic_message_level) {
1362 printk(KERN_INFO "%s: MAC/LAA Set to = %x.%x.%x.%x.%x.%x\n",dev->name, olympic_priv->olympic_laa[0],
1363 olympic_priv->olympic_laa[1], olympic_priv->olympic_laa[2],
1364 olympic_priv->olympic_laa[3], olympic_priv->olympic_laa[4],
1365 olympic_priv->olympic_laa[5]);
1368 return 0 ;
1371 static void olympic_arb_cmd(struct net_device *dev)
1373 struct olympic_private *olympic_priv = netdev_priv(dev);
1374 u8 __iomem *olympic_mmio=olympic_priv->olympic_mmio;
1375 u8 __iomem *arb_block, *asb_block, *srb ;
1376 u8 header_len ;
1377 u16 frame_len, buffer_len ;
1378 struct sk_buff *mac_frame ;
1379 u8 __iomem *buf_ptr ;
1380 u8 __iomem *frame_data ;
1381 u16 buff_off ;
1382 u16 lan_status = 0, lan_status_diff ; /* Initialize to stop compiler warning */
1383 u8 fdx_prot_error ;
1384 u16 next_ptr;
1386 arb_block = (olympic_priv->olympic_lap + olympic_priv->arb) ;
1387 asb_block = (olympic_priv->olympic_lap + olympic_priv->asb) ;
1388 srb = (olympic_priv->olympic_lap + olympic_priv->srb) ;
1390 if (readb(arb_block+0) == ARB_RECEIVE_DATA) { /* Receive.data, MAC frames */
1392 header_len = readb(arb_block+8) ; /* 802.5 Token-Ring Header Length */
1393 frame_len = swab16(readw(arb_block + 10)) ;
1395 buff_off = swab16(readw(arb_block + 6)) ;
1397 buf_ptr = olympic_priv->olympic_lap + buff_off ;
1399 #if OLYMPIC_DEBUG
1401 int i;
1402 frame_data = buf_ptr+offsetof(struct mac_receive_buffer,frame_data) ;
1404 for (i=0 ; i < 14 ; i++) {
1405 printk("Loc %d = %02x\n",i,readb(frame_data + i));
1408 printk("next %04x, fs %02x, len %04x\n",readw(buf_ptr+offsetof(struct mac_receive_buffer,next)), readb(buf_ptr+offsetof(struct mac_receive_buffer,frame_status)), readw(buf_ptr+offsetof(struct mac_receive_buffer,buffer_length)));
1410 #endif
1411 mac_frame = dev_alloc_skb(frame_len) ;
1412 if (!mac_frame) {
1413 printk(KERN_WARNING "%s: Memory squeeze, dropping frame.\n", dev->name);
1414 goto drop_frame;
1417 /* Walk the buffer chain, creating the frame */
1419 do {
1420 frame_data = buf_ptr+offsetof(struct mac_receive_buffer,frame_data) ;
1421 buffer_len = swab16(readw(buf_ptr+offsetof(struct mac_receive_buffer,buffer_length)));
1422 memcpy_fromio(skb_put(mac_frame, buffer_len), frame_data , buffer_len ) ;
1423 next_ptr=readw(buf_ptr+offsetof(struct mac_receive_buffer,next));
1424 } while (next_ptr && (buf_ptr=olympic_priv->olympic_lap + swab16(next_ptr)));
1426 mac_frame->protocol = tr_type_trans(mac_frame, dev);
1428 if (olympic_priv->olympic_network_monitor) {
1429 struct trh_hdr *mac_hdr;
1430 printk(KERN_WARNING "%s: Received MAC Frame, details:\n",dev->name);
1431 mac_hdr = tr_hdr(mac_frame);
1432 printk(KERN_WARNING "%s: MAC Frame Dest. Addr: %pM\n",
1433 dev->name, mac_hdr->daddr);
1434 printk(KERN_WARNING "%s: MAC Frame Srce. Addr: %pM\n",
1435 dev->name, mac_hdr->saddr);
1437 netif_rx(mac_frame);
1439 drop_frame:
1440 /* Now tell the card we have dealt with the received frame */
1442 /* Set LISR Bit 1 */
1443 writel(LISR_ARB_FREE,olympic_priv->olympic_mmio + LISR_SUM);
1445 /* Is the ASB free ? */
1447 if (readb(asb_block + 2) != 0xff) {
1448 olympic_priv->asb_queued = 1 ;
1449 writel(LISR_ASB_FREE_REQ,olympic_priv->olympic_mmio+LISR_SUM);
1450 return ;
1451 /* Drop out and wait for the bottom half to be run */
1454 writeb(ASB_RECEIVE_DATA,asb_block); /* Receive data */
1455 writeb(OLYMPIC_CLEAR_RET_CODE,asb_block+2); /* Necessary ?? */
1456 writeb(readb(arb_block+6),asb_block+6); /* Must send the address back to the adapter */
1457 writeb(readb(arb_block+7),asb_block+7); /* To let it know we have dealt with the data */
1459 writel(LISR_ASB_REPLY | LISR_ASB_FREE_REQ,olympic_priv->olympic_mmio+LISR_SUM);
1461 olympic_priv->asb_queued = 2 ;
1463 return ;
1465 } else if (readb(arb_block) == ARB_LAN_CHANGE_STATUS) { /* Lan.change.status */
1466 lan_status = swab16(readw(arb_block+6));
1467 fdx_prot_error = readb(arb_block+8) ;
1469 /* Issue ARB Free */
1470 writel(LISR_ARB_FREE,olympic_priv->olympic_mmio+LISR_SUM);
1472 lan_status_diff = olympic_priv->olympic_lan_status ^ lan_status ;
1474 if (lan_status_diff & (LSC_LWF | LSC_ARW | LSC_FPE | LSC_RR) ) {
1475 if (lan_status_diff & LSC_LWF)
1476 printk(KERN_WARNING "%s: Short circuit detected on the lobe\n",dev->name);
1477 if (lan_status_diff & LSC_ARW)
1478 printk(KERN_WARNING "%s: Auto removal error\n",dev->name);
1479 if (lan_status_diff & LSC_FPE)
1480 printk(KERN_WARNING "%s: FDX Protocol Error\n",dev->name);
1481 if (lan_status_diff & LSC_RR)
1482 printk(KERN_WARNING "%s: Force remove MAC frame received\n",dev->name);
1484 /* Adapter has been closed by the hardware */
1486 /* reset tx/rx fifo's and busmaster logic */
1488 writel(readl(olympic_mmio+BCTL)|(3<<13),olympic_mmio+BCTL);
1489 udelay(1);
1490 writel(readl(olympic_mmio+BCTL)&~(3<<13),olympic_mmio+BCTL);
1491 netif_stop_queue(dev);
1492 olympic_priv->srb = readw(olympic_priv->olympic_lap + LAPWWO) ;
1493 printk(KERN_WARNING "%s: Adapter has been closed\n", dev->name);
1494 } /* If serious error */
1496 if (olympic_priv->olympic_message_level) {
1497 if (lan_status_diff & LSC_SIG_LOSS)
1498 printk(KERN_WARNING "%s: No receive signal detected\n", dev->name);
1499 if (lan_status_diff & LSC_HARD_ERR)
1500 printk(KERN_INFO "%s: Beaconing\n",dev->name);
1501 if (lan_status_diff & LSC_SOFT_ERR)
1502 printk(KERN_WARNING "%s: Adapter transmitted Soft Error Report Mac Frame\n",dev->name);
1503 if (lan_status_diff & LSC_TRAN_BCN)
1504 printk(KERN_INFO "%s: We are transmitting the beacon, aaah\n",dev->name);
1505 if (lan_status_diff & LSC_SS)
1506 printk(KERN_INFO "%s: Single Station on the ring\n", dev->name);
1507 if (lan_status_diff & LSC_RING_REC)
1508 printk(KERN_INFO "%s: Ring recovery ongoing\n",dev->name);
1509 if (lan_status_diff & LSC_FDX_MODE)
1510 printk(KERN_INFO "%s: Operating in FDX mode\n",dev->name);
1513 if (lan_status_diff & LSC_CO) {
1515 if (olympic_priv->olympic_message_level)
1516 printk(KERN_INFO "%s: Counter Overflow\n", dev->name);
1518 /* Issue READ.LOG command */
1520 writeb(SRB_READ_LOG, srb);
1521 writeb(0,srb+1);
1522 writeb(OLYMPIC_CLEAR_RET_CODE,srb+2);
1523 writeb(0,srb+3);
1524 writeb(0,srb+4);
1525 writeb(0,srb+5);
1527 olympic_priv->srb_queued=2; /* Can't sleep, use srb_bh */
1529 writel(LISR_SRB_CMD,olympic_mmio+LISR_SUM);
1533 if (lan_status_diff & LSC_SR_CO) {
1535 if (olympic_priv->olympic_message_level)
1536 printk(KERN_INFO "%s: Source routing counters overflow\n", dev->name);
1538 /* Issue a READ.SR.COUNTERS */
1540 writeb(SRB_READ_SR_COUNTERS,srb);
1541 writeb(0,srb+1);
1542 writeb(OLYMPIC_CLEAR_RET_CODE,srb+2);
1543 writeb(0,srb+3);
1545 olympic_priv->srb_queued=2; /* Can't sleep, use srb_bh */
1547 writel(LISR_SRB_CMD,olympic_mmio+LISR_SUM);
1551 olympic_priv->olympic_lan_status = lan_status ;
1553 } /* Lan.change.status */
1554 else
1555 printk(KERN_WARNING "%s: Unknown arb command\n", dev->name);
1558 static void olympic_asb_bh(struct net_device *dev)
1560 struct olympic_private *olympic_priv = netdev_priv(dev);
1561 u8 __iomem *arb_block, *asb_block ;
1563 arb_block = (olympic_priv->olympic_lap + olympic_priv->arb) ;
1564 asb_block = (olympic_priv->olympic_lap + olympic_priv->asb) ;
1566 if (olympic_priv->asb_queued == 1) { /* Dropped through the first time */
1568 writeb(ASB_RECEIVE_DATA,asb_block); /* Receive data */
1569 writeb(OLYMPIC_CLEAR_RET_CODE,asb_block+2); /* Necessary ?? */
1570 writeb(readb(arb_block+6),asb_block+6); /* Must send the address back to the adapter */
1571 writeb(readb(arb_block+7),asb_block+7); /* To let it know we have dealt with the data */
1573 writel(LISR_ASB_REPLY | LISR_ASB_FREE_REQ,olympic_priv->olympic_mmio+LISR_SUM);
1574 olympic_priv->asb_queued = 2 ;
1576 return ;
1579 if (olympic_priv->asb_queued == 2) {
1580 switch (readb(asb_block+2)) {
1581 case 0x01:
1582 printk(KERN_WARNING "%s: Unrecognized command code\n", dev->name);
1583 break ;
1584 case 0x26:
1585 printk(KERN_WARNING "%s: Unrecognized buffer address\n", dev->name);
1586 break ;
1587 case 0xFF:
1588 /* Valid response, everything should be ok again */
1589 break ;
1590 default:
1591 printk(KERN_WARNING "%s: Invalid return code in asb\n",dev->name);
1592 break ;
1595 olympic_priv->asb_queued = 0 ;
1598 static int olympic_change_mtu(struct net_device *dev, int mtu)
1600 struct olympic_private *olympic_priv = netdev_priv(dev);
1601 u16 max_mtu ;
1603 if (olympic_priv->olympic_ring_speed == 4)
1604 max_mtu = 4500 ;
1605 else
1606 max_mtu = 18000 ;
1608 if (mtu > max_mtu)
1609 return -EINVAL ;
1610 if (mtu < 100)
1611 return -EINVAL ;
1613 dev->mtu = mtu ;
1614 olympic_priv->pkt_buf_sz = mtu + TR_HLEN ;
1616 return 0 ;
1619 static int olympic_proc_show(struct seq_file *m, void *v)
1621 struct net_device *dev = m->private;
1622 struct olympic_private *olympic_priv=netdev_priv(dev);
1623 u8 __iomem *oat = (olympic_priv->olympic_lap + olympic_priv->olympic_addr_table_addr) ;
1624 u8 __iomem *opt = (olympic_priv->olympic_lap + olympic_priv->olympic_parms_addr) ;
1625 u8 addr[6];
1626 u8 addr2[6];
1627 int i;
1629 seq_printf(m,
1630 "IBM Pit/Pit-Phy/Olympic Chipset Token Ring Adapter %s\n",dev->name);
1631 seq_printf(m, "\n%6s: Adapter Address : Node Address : Functional Addr\n",
1632 dev->name);
1634 for (i = 0 ; i < 6 ; i++)
1635 addr[i] = readb(oat+offsetof(struct olympic_adapter_addr_table,node_addr) + i);
1637 seq_printf(m, "%6s: %pM : %pM : %02x:%02x:%02x:%02x\n",
1638 dev->name,
1639 dev->dev_addr, addr,
1640 readb(oat+offsetof(struct olympic_adapter_addr_table,func_addr)),
1641 readb(oat+offsetof(struct olympic_adapter_addr_table,func_addr)+1),
1642 readb(oat+offsetof(struct olympic_adapter_addr_table,func_addr)+2),
1643 readb(oat+offsetof(struct olympic_adapter_addr_table,func_addr)+3));
1645 seq_printf(m, "\n%6s: Token Ring Parameters Table:\n", dev->name);
1647 seq_printf(m, "%6s: Physical Addr : Up Node Address : Poll Address : AccPri : Auth Src : Att Code :\n",
1648 dev->name) ;
1650 for (i = 0 ; i < 6 ; i++)
1651 addr[i] = readb(opt+offsetof(struct olympic_parameters_table, up_node_addr) + i);
1652 for (i = 0 ; i < 6 ; i++)
1653 addr2[i] = readb(opt+offsetof(struct olympic_parameters_table, poll_addr) + i);
1655 seq_printf(m, "%6s: %02x:%02x:%02x:%02x : %pM : %pM : %04x : %04x : %04x :\n",
1656 dev->name,
1657 readb(opt+offsetof(struct olympic_parameters_table, phys_addr)),
1658 readb(opt+offsetof(struct olympic_parameters_table, phys_addr)+1),
1659 readb(opt+offsetof(struct olympic_parameters_table, phys_addr)+2),
1660 readb(opt+offsetof(struct olympic_parameters_table, phys_addr)+3),
1661 addr, addr2,
1662 swab16(readw(opt+offsetof(struct olympic_parameters_table, acc_priority))),
1663 swab16(readw(opt+offsetof(struct olympic_parameters_table, auth_source_class))),
1664 swab16(readw(opt+offsetof(struct olympic_parameters_table, att_code))));
1666 seq_printf(m, "%6s: Source Address : Bcn T : Maj. V : Lan St : Lcl Rg : Mon Err : Frame Correl : \n",
1667 dev->name) ;
1669 for (i = 0 ; i < 6 ; i++)
1670 addr[i] = readb(opt+offsetof(struct olympic_parameters_table, source_addr) + i);
1671 seq_printf(m, "%6s: %pM : %04x : %04x : %04x : %04x : %04x : %04x : \n",
1672 dev->name, addr,
1673 swab16(readw(opt+offsetof(struct olympic_parameters_table, beacon_type))),
1674 swab16(readw(opt+offsetof(struct olympic_parameters_table, major_vector))),
1675 swab16(readw(opt+offsetof(struct olympic_parameters_table, lan_status))),
1676 swab16(readw(opt+offsetof(struct olympic_parameters_table, local_ring))),
1677 swab16(readw(opt+offsetof(struct olympic_parameters_table, mon_error))),
1678 swab16(readw(opt+offsetof(struct olympic_parameters_table, frame_correl))));
1680 seq_printf(m, "%6s: Beacon Details : Tx : Rx : NAUN Node Address : NAUN Node Phys : \n",
1681 dev->name) ;
1683 for (i = 0 ; i < 6 ; i++)
1684 addr[i] = readb(opt+offsetof(struct olympic_parameters_table, beacon_naun) + i);
1685 seq_printf(m, "%6s: : %02x : %02x : %pM : %02x:%02x:%02x:%02x : \n",
1686 dev->name,
1687 swab16(readw(opt+offsetof(struct olympic_parameters_table, beacon_transmit))),
1688 swab16(readw(opt+offsetof(struct olympic_parameters_table, beacon_receive))),
1689 addr,
1690 readb(opt+offsetof(struct olympic_parameters_table, beacon_phys)),
1691 readb(opt+offsetof(struct olympic_parameters_table, beacon_phys)+1),
1692 readb(opt+offsetof(struct olympic_parameters_table, beacon_phys)+2),
1693 readb(opt+offsetof(struct olympic_parameters_table, beacon_phys)+3));
1695 return 0;
1698 static int olympic_proc_open(struct inode *inode, struct file *file)
1700 return single_open(file, olympic_proc_show, PDE(inode)->data);
1703 static const struct file_operations olympic_proc_ops = {
1704 .open = olympic_proc_open,
1705 .read = seq_read,
1706 .llseek = seq_lseek,
1707 .release = single_release,
1710 static void __devexit olympic_remove_one(struct pci_dev *pdev)
1712 struct net_device *dev = pci_get_drvdata(pdev) ;
1713 struct olympic_private *olympic_priv=netdev_priv(dev);
1715 if (olympic_priv->olympic_network_monitor) {
1716 char proc_name[20] ;
1717 strcpy(proc_name,"olympic_") ;
1718 strcat(proc_name,dev->name) ;
1719 remove_proc_entry(proc_name,init_net.proc_net);
1721 unregister_netdev(dev) ;
1722 iounmap(olympic_priv->olympic_mmio) ;
1723 iounmap(olympic_priv->olympic_lap) ;
1724 pci_release_regions(pdev) ;
1725 pci_set_drvdata(pdev,NULL) ;
1726 free_netdev(dev) ;
1729 static struct pci_driver olympic_driver = {
1730 .name = "olympic",
1731 .id_table = olympic_pci_tbl,
1732 .probe = olympic_probe,
1733 .remove = __devexit_p(olympic_remove_one),
1736 static int __init olympic_pci_init(void)
1738 return pci_register_driver(&olympic_driver) ;
1741 static void __exit olympic_pci_cleanup(void)
1743 pci_unregister_driver(&olympic_driver) ;
1747 module_init(olympic_pci_init) ;
1748 module_exit(olympic_pci_cleanup) ;
1750 MODULE_LICENSE("GPL");