[media] snd_tea575x: Add a cannot_mute flag
[linux-2.6/libata-dev.git] / include / linux / watchdog.h
blobac40716b44e9a2a9ee1c13d1e878a195ce7215b0
1 /*
2 * Generic watchdog defines. Derived from..
4 * Berkshire PC Watchdog Defines
5 * by Ken Hollis <khollis@bitgate.com>
7 */
9 #ifndef _LINUX_WATCHDOG_H
10 #define _LINUX_WATCHDOG_H
12 #include <linux/ioctl.h>
13 #include <linux/types.h>
15 #define WATCHDOG_IOCTL_BASE 'W'
17 struct watchdog_info {
18 __u32 options; /* Options the card/driver supports */
19 __u32 firmware_version; /* Firmware version of the card */
20 __u8 identity[32]; /* Identity of the board */
23 #define WDIOC_GETSUPPORT _IOR(WATCHDOG_IOCTL_BASE, 0, struct watchdog_info)
24 #define WDIOC_GETSTATUS _IOR(WATCHDOG_IOCTL_BASE, 1, int)
25 #define WDIOC_GETBOOTSTATUS _IOR(WATCHDOG_IOCTL_BASE, 2, int)
26 #define WDIOC_GETTEMP _IOR(WATCHDOG_IOCTL_BASE, 3, int)
27 #define WDIOC_SETOPTIONS _IOR(WATCHDOG_IOCTL_BASE, 4, int)
28 #define WDIOC_KEEPALIVE _IOR(WATCHDOG_IOCTL_BASE, 5, int)
29 #define WDIOC_SETTIMEOUT _IOWR(WATCHDOG_IOCTL_BASE, 6, int)
30 #define WDIOC_GETTIMEOUT _IOR(WATCHDOG_IOCTL_BASE, 7, int)
31 #define WDIOC_SETPRETIMEOUT _IOWR(WATCHDOG_IOCTL_BASE, 8, int)
32 #define WDIOC_GETPRETIMEOUT _IOR(WATCHDOG_IOCTL_BASE, 9, int)
33 #define WDIOC_GETTIMELEFT _IOR(WATCHDOG_IOCTL_BASE, 10, int)
35 #define WDIOF_UNKNOWN -1 /* Unknown flag error */
36 #define WDIOS_UNKNOWN -1 /* Unknown status error */
38 #define WDIOF_OVERHEAT 0x0001 /* Reset due to CPU overheat */
39 #define WDIOF_FANFAULT 0x0002 /* Fan failed */
40 #define WDIOF_EXTERN1 0x0004 /* External relay 1 */
41 #define WDIOF_EXTERN2 0x0008 /* External relay 2 */
42 #define WDIOF_POWERUNDER 0x0010 /* Power bad/power fault */
43 #define WDIOF_CARDRESET 0x0020 /* Card previously reset the CPU */
44 #define WDIOF_POWEROVER 0x0040 /* Power over voltage */
45 #define WDIOF_SETTIMEOUT 0x0080 /* Set timeout (in seconds) */
46 #define WDIOF_MAGICCLOSE 0x0100 /* Supports magic close char */
47 #define WDIOF_PRETIMEOUT 0x0200 /* Pretimeout (in seconds), get/set */
48 #define WDIOF_KEEPALIVEPING 0x8000 /* Keep alive ping reply */
50 #define WDIOS_DISABLECARD 0x0001 /* Turn off the watchdog timer */
51 #define WDIOS_ENABLECARD 0x0002 /* Turn on the watchdog timer */
52 #define WDIOS_TEMPPANIC 0x0004 /* Kernel panic on temperature trip */
54 #ifdef __KERNEL__
56 #include <linux/bitops.h>
58 struct watchdog_ops;
59 struct watchdog_device;
61 /** struct watchdog_ops - The watchdog-devices operations
63 * @owner: The module owner.
64 * @start: The routine for starting the watchdog device.
65 * @stop: The routine for stopping the watchdog device.
66 * @ping: The routine that sends a keepalive ping to the watchdog device.
67 * @status: The routine that shows the status of the watchdog device.
68 * @set_timeout:The routine for setting the watchdog devices timeout value.
69 * @get_timeleft:The routine that get's the time that's left before a reset.
70 * @ioctl: The routines that handles extra ioctl calls.
72 * The watchdog_ops structure contains a list of low-level operations
73 * that control a watchdog device. It also contains the module that owns
74 * these operations. The start and stop function are mandatory, all other
75 * functions are optonal.
77 struct watchdog_ops {
78 struct module *owner;
79 /* mandatory operations */
80 int (*start)(struct watchdog_device *);
81 int (*stop)(struct watchdog_device *);
82 /* optional operations */
83 int (*ping)(struct watchdog_device *);
84 unsigned int (*status)(struct watchdog_device *);
85 int (*set_timeout)(struct watchdog_device *, unsigned int);
86 unsigned int (*get_timeleft)(struct watchdog_device *);
87 long (*ioctl)(struct watchdog_device *, unsigned int, unsigned long);
90 /** struct watchdog_device - The structure that defines a watchdog device
92 * @info: Pointer to a watchdog_info structure.
93 * @ops: Pointer to the list of watchdog operations.
94 * @bootstatus: Status of the watchdog device at boot.
95 * @timeout: The watchdog devices timeout value.
96 * @min_timeout:The watchdog devices minimum timeout value.
97 * @max_timeout:The watchdog devices maximum timeout value.
98 * @driver-data:Pointer to the drivers private data.
99 * @status: Field that contains the devices internal status bits.
101 * The watchdog_device structure contains all information about a
102 * watchdog timer device.
104 * The driver-data field may not be accessed directly. It must be accessed
105 * via the watchdog_set_drvdata and watchdog_get_drvdata helpers.
107 struct watchdog_device {
108 const struct watchdog_info *info;
109 const struct watchdog_ops *ops;
110 unsigned int bootstatus;
111 unsigned int timeout;
112 unsigned int min_timeout;
113 unsigned int max_timeout;
114 void *driver_data;
115 unsigned long status;
116 /* Bit numbers for status flags */
117 #define WDOG_ACTIVE 0 /* Is the watchdog running/active */
118 #define WDOG_DEV_OPEN 1 /* Opened via /dev/watchdog ? */
119 #define WDOG_ALLOW_RELEASE 2 /* Did we receive the magic char ? */
120 #define WDOG_NO_WAY_OUT 3 /* Is 'nowayout' feature set ? */
123 #ifdef CONFIG_WATCHDOG_NOWAYOUT
124 #define WATCHDOG_NOWAYOUT 1
125 #define WATCHDOG_NOWAYOUT_INIT_STATUS (1 << WDOG_NO_WAY_OUT)
126 #else
127 #define WATCHDOG_NOWAYOUT 0
128 #define WATCHDOG_NOWAYOUT_INIT_STATUS 0
129 #endif
131 /* Use the following function to set the nowayout feature */
132 static inline void watchdog_set_nowayout(struct watchdog_device *wdd, bool nowayout)
134 if (nowayout)
135 set_bit(WDOG_NO_WAY_OUT, &wdd->status);
138 /* Use the following functions to manipulate watchdog driver specific data */
139 static inline void watchdog_set_drvdata(struct watchdog_device *wdd, void *data)
141 wdd->driver_data = data;
144 static inline void *watchdog_get_drvdata(struct watchdog_device *wdd)
146 return wdd->driver_data;
149 /* drivers/watchdog/core/watchdog_core.c */
150 extern int watchdog_register_device(struct watchdog_device *);
151 extern void watchdog_unregister_device(struct watchdog_device *);
153 #endif /* __KERNEL__ */
155 #endif /* ifndef _LINUX_WATCHDOG_H */