?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
lib/vsprintf.c: kptr_restrict: fix pK-error in SysRq show-all-timers(Q)
[linux-2.6/libata-dev.git] / drivers / spi / spi-s3c64xx.c
blob646a7657fe62fbb545f95fc771b406d0cad6e5f9
1 /*
2 * Copyright (C) 2009 Samsung Electronics Ltd.
3 * Jaswinder Singh <jassi.brar@samsung.com>
4 *
5 * This program is free software; you can redistribute it and/or modify
6 * it under the terms of the GNU General Public License as published by
7 * the Free Software Foundation; either version 2 of the License, or
8 * (at your option) any later version.
9 *
10 * This program is distributed in the hope that it will be useful,
11 * but WITHOUT ANY WARRANTY; without even the implied warranty of
12 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13 * GNU General Public License for more details.
14 *
15 * You should have received a copy of the GNU General Public License
16 * along with this program; if not, write to the Free Software
17 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
18 */
19
20 #include <linux/init.h>
21 #include <linux/module.h>
22 #include <linux/workqueue.h>
23 #include <linux/interrupt.h>
24 #include <linux/delay.h>
25 #include <linux/clk.h>
26 #include <linux/dma-mapping.h>
27 #include <linux/platform_device.h>
28 #include <linux/pm_runtime.h>
29 #include <linux/spi/spi.h>
30 #include <linux/gpio.h>
31 #include <linux/of.h>
32 #include <linux/of_gpio.h>
33
34 #include <mach/dma.h>
35 #include <plat/s3c64xx-spi.h>
36
37 #define MAX_SPI_PORTS 3
38
39 /* Registers and bit-fields */
40
41 #define S3C64XX_SPI_CH_CFG 0x00
42 #define S3C64XX_SPI_CLK_CFG 0x04
43 #define S3C64XX_SPI_MODE_CFG 0x08
44 #define S3C64XX_SPI_SLAVE_SEL 0x0C
45 #define S3C64XX_SPI_INT_EN 0x10
46 #define S3C64XX_SPI_STATUS 0x14
47 #define S3C64XX_SPI_TX_DATA 0x18
48 #define S3C64XX_SPI_RX_DATA 0x1C
49 #define S3C64XX_SPI_PACKET_CNT 0x20
50 #define S3C64XX_SPI_PENDING_CLR 0x24
51 #define S3C64XX_SPI_SWAP_CFG 0x28
52 #define S3C64XX_SPI_FB_CLK 0x2C
53
54 #define S3C64XX_SPI_CH_HS_EN (1<<6) /* High Speed Enable */
55 #define S3C64XX_SPI_CH_SW_RST (1<<5)
56 #define S3C64XX_SPI_CH_SLAVE (1<<4)
57 #define S3C64XX_SPI_CPOL_L (1<<3)
58 #define S3C64XX_SPI_CPHA_B (1<<2)
59 #define S3C64XX_SPI_CH_RXCH_ON (1<<1)
60 #define S3C64XX_SPI_CH_TXCH_ON (1<<0)
61
62 #define S3C64XX_SPI_CLKSEL_SRCMSK (3<<9)
63 #define S3C64XX_SPI_CLKSEL_SRCSHFT 9
64 #define S3C64XX_SPI_ENCLK_ENABLE (1<<8)
65 #define S3C64XX_SPI_PSR_MASK 0xff
66
67 #define S3C64XX_SPI_MODE_CH_TSZ_BYTE (0<<29)
68 #define S3C64XX_SPI_MODE_CH_TSZ_HALFWORD (1<<29)
69 #define S3C64XX_SPI_MODE_CH_TSZ_WORD (2<<29)
70 #define S3C64XX_SPI_MODE_CH_TSZ_MASK (3<<29)
71 #define S3C64XX_SPI_MODE_BUS_TSZ_BYTE (0<<17)
72 #define S3C64XX_SPI_MODE_BUS_TSZ_HALFWORD (1<<17)
73 #define S3C64XX_SPI_MODE_BUS_TSZ_WORD (2<<17)
74 #define S3C64XX_SPI_MODE_BUS_TSZ_MASK (3<<17)
75 #define S3C64XX_SPI_MODE_RXDMA_ON (1<<2)
76 #define S3C64XX_SPI_MODE_TXDMA_ON (1<<1)
77 #define S3C64XX_SPI_MODE_4BURST (1<<0)
78
79 #define S3C64XX_SPI_SLAVE_AUTO (1<<1)
80 #define S3C64XX_SPI_SLAVE_SIG_INACT (1<<0)
81
82 #define S3C64XX_SPI_INT_TRAILING_EN (1<<6)
83 #define S3C64XX_SPI_INT_RX_OVERRUN_EN (1<<5)
84 #define S3C64XX_SPI_INT_RX_UNDERRUN_EN (1<<4)
85 #define S3C64XX_SPI_INT_TX_OVERRUN_EN (1<<3)
86 #define S3C64XX_SPI_INT_TX_UNDERRUN_EN (1<<2)
87 #define S3C64XX_SPI_INT_RX_FIFORDY_EN (1<<1)
88 #define S3C64XX_SPI_INT_TX_FIFORDY_EN (1<<0)
89
90 #define S3C64XX_SPI_ST_RX_OVERRUN_ERR (1<<5)
91 #define S3C64XX_SPI_ST_RX_UNDERRUN_ERR (1<<4)
92 #define S3C64XX_SPI_ST_TX_OVERRUN_ERR (1<<3)
93 #define S3C64XX_SPI_ST_TX_UNDERRUN_ERR (1<<2)
94 #define S3C64XX_SPI_ST_RX_FIFORDY (1<<1)
95 #define S3C64XX_SPI_ST_TX_FIFORDY (1<<0)
96
97 #define S3C64XX_SPI_PACKET_CNT_EN (1<<16)
98
99 #define S3C64XX_SPI_PND_TX_UNDERRUN_CLR (1<<4)
100 #define S3C64XX_SPI_PND_TX_OVERRUN_CLR (1<<3)
101 #define S3C64XX_SPI_PND_RX_UNDERRUN_CLR (1<<2)
102 #define S3C64XX_SPI_PND_RX_OVERRUN_CLR (1<<1)
103 #define S3C64XX_SPI_PND_TRAILING_CLR (1<<0)
104
105 #define S3C64XX_SPI_SWAP_RX_HALF_WORD (1<<7)
106 #define S3C64XX_SPI_SWAP_RX_BYTE (1<<6)
107 #define S3C64XX_SPI_SWAP_RX_BIT (1<<5)
108 #define S3C64XX_SPI_SWAP_RX_EN (1<<4)
109 #define S3C64XX_SPI_SWAP_TX_HALF_WORD (1<<3)
110 #define S3C64XX_SPI_SWAP_TX_BYTE (1<<2)
111 #define S3C64XX_SPI_SWAP_TX_BIT (1<<1)
112 #define S3C64XX_SPI_SWAP_TX_EN (1<<0)
113
114 #define S3C64XX_SPI_FBCLK_MSK (3<<0)
115
116 #define FIFO_LVL_MASK(i) ((i)->port_conf->fifo_lvl_mask[i->port_id])
117 #define S3C64XX_SPI_ST_TX_DONE(v, i) (((v) & \
118 (1 << (i)->port_conf->tx_st_done)) ? 1 : 0)
119 #define TX_FIFO_LVL(v, i) (((v) >> 6) & FIFO_LVL_MASK(i))
120 #define RX_FIFO_LVL(v, i) (((v) >> (i)->port_conf->rx_lvl_offset) & \
121 FIFO_LVL_MASK(i))
122
123 #define S3C64XX_SPI_MAX_TRAILCNT 0x3ff
124 #define S3C64XX_SPI_TRAILCNT_OFF 19
125
126 #define S3C64XX_SPI_TRAILCNT S3C64XX_SPI_MAX_TRAILCNT
127
128 #define msecs_to_loops(t) (loops_per_jiffy / 1000 * HZ * t)
129
130 #define RXBUSY (1<<2)
131 #define TXBUSY (1<<3)
132
133 struct s3c64xx_spi_dma_data {
134 unsigned ch;
135 enum dma_data_direction direction;
136 enum dma_ch dmach;
137 struct property *dma_prop;
138 };
139
140 /**
141 * struct s3c64xx_spi_info - SPI Controller hardware info
142 * @fifo_lvl_mask: Bit-mask for {TX|RX}_FIFO_LVL bits in SPI_STATUS register.
143 * @rx_lvl_offset: Bit offset of RX_FIFO_LVL bits in SPI_STATUS regiter.
144 * @tx_st_done: Bit offset of TX_DONE bit in SPI_STATUS regiter.
145 * @high_speed: True, if the controller supports HIGH_SPEED_EN bit.
146 * @clk_from_cmu: True, if the controller does not include a clock mux and
147 * prescaler unit.
148 *
149 * The Samsung s3c64xx SPI controller are used on various Samsung SoC's but
150 * differ in some aspects such as the size of the fifo and spi bus clock
151 * setup. Such differences are specified to the driver using this structure
152 * which is provided as driver data to the driver.
153 */
154 struct s3c64xx_spi_port_config {
155 int fifo_lvl_mask[MAX_SPI_PORTS];
156 int rx_lvl_offset;
157 int tx_st_done;
158 bool high_speed;
159 bool clk_from_cmu;
160 };
161
162 /**
163 * struct s3c64xx_spi_driver_data - Runtime info holder for SPI driver.
164 * @clk: Pointer to the spi clock.
165 * @src_clk: Pointer to the clock used to generate SPI signals.
166 * @master: Pointer to the SPI Protocol master.
167 * @cntrlr_info: Platform specific data for the controller this driver manages.
168 * @tgl_spi: Pointer to the last CS left untoggled by the cs_change hint.
169 * @queue: To log SPI xfer requests.
170 * @lock: Controller specific lock.
171 * @state: Set of FLAGS to indicate status.
172 * @rx_dmach: Controller's DMA channel for Rx.
173 * @tx_dmach: Controller's DMA channel for Tx.
174 * @sfr_start: BUS address of SPI controller regs.
175 * @regs: Pointer to ioremap'ed controller registers.
176 * @irq: interrupt
177 * @xfer_completion: To indicate completion of xfer task.
178 * @cur_mode: Stores the active configuration of the controller.
179 * @cur_bpw: Stores the active bits per word settings.
180 * @cur_speed: Stores the active xfer clock speed.
181 */
182 struct s3c64xx_spi_driver_data {
183 void __iomem *regs;
184 struct clk *clk;
185 struct clk *src_clk;
186 struct platform_device *pdev;
187 struct spi_master *master;
188 struct s3c64xx_spi_info *cntrlr_info;
189 struct spi_device *tgl_spi;
190 struct list_head queue;
191 spinlock_t lock;
192 unsigned long sfr_start;
193 struct completion xfer_completion;
194 unsigned state;
195 unsigned cur_mode, cur_bpw;
196 unsigned cur_speed;
197 struct s3c64xx_spi_dma_data rx_dma;
198 struct s3c64xx_spi_dma_data tx_dma;
199 struct samsung_dma_ops *ops;
200 struct s3c64xx_spi_port_config *port_conf;
201 unsigned int port_id;
202 unsigned long gpios[4];
203 };
204
205 static struct s3c2410_dma_client s3c64xx_spi_dma_client = {
206 .name = "samsung-spi-dma",
207 };
208
209 static void flush_fifo(struct s3c64xx_spi_driver_data *sdd)
210 {
211 void __iomem *regs = sdd->regs;
212 unsigned long loops;
213 u32 val;
214
215 writel(0, regs + S3C64XX_SPI_PACKET_CNT);
216
217 val = readl(regs + S3C64XX_SPI_CH_CFG);
218 val |= S3C64XX_SPI_CH_SW_RST;
219 val &= ~S3C64XX_SPI_CH_HS_EN;
220 writel(val, regs + S3C64XX_SPI_CH_CFG);
221
222 /* Flush TxFIFO*/
223 loops = msecs_to_loops(1);
224 do {
225 val = readl(regs + S3C64XX_SPI_STATUS);
226 } while (TX_FIFO_LVL(val, sdd) && loops--);
227
228 if (loops == 0)
229 dev_warn(&sdd->pdev->dev, "Timed out flushing TX FIFO\n");
230
231 /* Flush RxFIFO*/
232 loops = msecs_to_loops(1);
233 do {
234 val = readl(regs + S3C64XX_SPI_STATUS);
235 if (RX_FIFO_LVL(val, sdd))
236 readl(regs + S3C64XX_SPI_RX_DATA);
237 else
238 break;
239 } while (loops--);
240
241 if (loops == 0)
242 dev_warn(&sdd->pdev->dev, "Timed out flushing RX FIFO\n");
243
244 val = readl(regs + S3C64XX_SPI_CH_CFG);
245 val &= ~S3C64XX_SPI_CH_SW_RST;
246 writel(val, regs + S3C64XX_SPI_CH_CFG);
247
248 val = readl(regs + S3C64XX_SPI_MODE_CFG);
249 val &= ~(S3C64XX_SPI_MODE_TXDMA_ON | S3C64XX_SPI_MODE_RXDMA_ON);
250 writel(val, regs + S3C64XX_SPI_MODE_CFG);
251
252 val = readl(regs + S3C64XX_SPI_CH_CFG);
253 val &= ~(S3C64XX_SPI_CH_RXCH_ON | S3C64XX_SPI_CH_TXCH_ON);
254 writel(val, regs + S3C64XX_SPI_CH_CFG);
255 }
256
257 static void s3c64xx_spi_dmacb(void *data)
258 {
259 struct s3c64xx_spi_driver_data *sdd;
260 struct s3c64xx_spi_dma_data *dma = data;
261 unsigned long flags;
262
263 if (dma->direction == DMA_DEV_TO_MEM)
264 sdd = container_of(data,
265 struct s3c64xx_spi_driver_data, rx_dma);
266 else
267 sdd = container_of(data,
268 struct s3c64xx_spi_driver_data, tx_dma);
269
270 spin_lock_irqsave(&sdd->lock, flags);
271
272 if (dma->direction == DMA_DEV_TO_MEM) {
273 sdd->state &= ~RXBUSY;
274 if (!(sdd->state & TXBUSY))
275 complete(&sdd->xfer_completion);
276 } else {
277 sdd->state &= ~TXBUSY;
278 if (!(sdd->state & RXBUSY))
279 complete(&sdd->xfer_completion);
280 }
281
282 spin_unlock_irqrestore(&sdd->lock, flags);
283 }
284
285 static void prepare_dma(struct s3c64xx_spi_dma_data *dma,
286 unsigned len, dma_addr_t buf)
287 {
288 struct s3c64xx_spi_driver_data *sdd;
289 struct samsung_dma_prep info;
290 struct samsung_dma_config config;
291
292 if (dma->direction == DMA_DEV_TO_MEM) {
293 sdd = container_of((void *)dma,
294 struct s3c64xx_spi_driver_data, rx_dma);
295 config.direction = sdd->rx_dma.direction;
296 config.fifo = sdd->sfr_start + S3C64XX_SPI_RX_DATA;
297 config.width = sdd->cur_bpw / 8;
298 sdd->ops->config(sdd->rx_dma.ch, &config);
299 } else {
300 sdd = container_of((void *)dma,
301 struct s3c64xx_spi_driver_data, tx_dma);
302 config.direction = sdd->tx_dma.direction;
303 config.fifo = sdd->sfr_start + S3C64XX_SPI_TX_DATA;
304 config.width = sdd->cur_bpw / 8;
305 sdd->ops->config(sdd->tx_dma.ch, &config);
306 }
307
308 info.cap = DMA_SLAVE;
309 info.len = len;
310 info.fp = s3c64xx_spi_dmacb;
311 info.fp_param = dma;
312 info.direction = dma->direction;
313 info.buf = buf;
314
315 sdd->ops->prepare(dma->ch, &info);
316 sdd->ops->trigger(dma->ch);
317 }
318
319 static int acquire_dma(struct s3c64xx_spi_driver_data *sdd)
320 {
321 struct samsung_dma_req req;
322
323 sdd->ops = samsung_dma_get_ops();
324
325 req.cap = DMA_SLAVE;
326 req.client = &s3c64xx_spi_dma_client;
327
328 req.dt_dmach_prop = sdd->rx_dma.dma_prop;
329 sdd->rx_dma.ch = sdd->ops->request(sdd->rx_dma.dmach, &req);
330 req.dt_dmach_prop = sdd->tx_dma.dma_prop;
331 sdd->tx_dma.ch = sdd->ops->request(sdd->tx_dma.dmach, &req);
332
333 return 1;
334 }
335
336 static void enable_datapath(struct s3c64xx_spi_driver_data *sdd,
337 struct spi_device *spi,
338 struct spi_transfer *xfer, int dma_mode)
339 {
340 void __iomem *regs = sdd->regs;
341 u32 modecfg, chcfg;
342
343 modecfg = readl(regs + S3C64XX_SPI_MODE_CFG);
344 modecfg &= ~(S3C64XX_SPI_MODE_TXDMA_ON | S3C64XX_SPI_MODE_RXDMA_ON);
345
346 chcfg = readl(regs + S3C64XX_SPI_CH_CFG);
347 chcfg &= ~S3C64XX_SPI_CH_TXCH_ON;
348
349 if (dma_mode) {
350 chcfg &= ~S3C64XX_SPI_CH_RXCH_ON;
351 } else {
352 /* Always shift in data in FIFO, even if xfer is Tx only,
353 * this helps setting PCKT_CNT value for generating clocks
354 * as exactly needed.
355 */
356 chcfg |= S3C64XX_SPI_CH_RXCH_ON;
357 writel(((xfer->len * 8 / sdd->cur_bpw) & 0xffff)
358 | S3C64XX_SPI_PACKET_CNT_EN,
359 regs + S3C64XX_SPI_PACKET_CNT);
360 }
361
362 if (xfer->tx_buf != NULL) {
363 sdd->state |= TXBUSY;
364 chcfg |= S3C64XX_SPI_CH_TXCH_ON;
365 if (dma_mode) {
366 modecfg |= S3C64XX_SPI_MODE_TXDMA_ON;
367 prepare_dma(&sdd->tx_dma, xfer->len, xfer->tx_dma);
368 } else {
369 switch (sdd->cur_bpw) {
370 case 32:
371 iowrite32_rep(regs + S3C64XX_SPI_TX_DATA,
372 xfer->tx_buf, xfer->len / 4);
373 break;
374 case 16:
375 iowrite16_rep(regs + S3C64XX_SPI_TX_DATA,
376 xfer->tx_buf, xfer->len / 2);
377 break;
378 default:
379 iowrite8_rep(regs + S3C64XX_SPI_TX_DATA,
380 xfer->tx_buf, xfer->len);
381 break;
382 }
383 }
384 }
385
386 if (xfer->rx_buf != NULL) {
387 sdd->state |= RXBUSY;
388
389 if (sdd->port_conf->high_speed && sdd->cur_speed >= 30000000UL
390 && !(sdd->cur_mode & SPI_CPHA))
391 chcfg |= S3C64XX_SPI_CH_HS_EN;
392
393 if (dma_mode) {
394 modecfg |= S3C64XX_SPI_MODE_RXDMA_ON;
395 chcfg |= S3C64XX_SPI_CH_RXCH_ON;
396 writel(((xfer->len * 8 / sdd->cur_bpw) & 0xffff)
397 | S3C64XX_SPI_PACKET_CNT_EN,
398 regs + S3C64XX_SPI_PACKET_CNT);
399 prepare_dma(&sdd->rx_dma, xfer->len, xfer->rx_dma);
400 }
401 }
402
403 writel(modecfg, regs + S3C64XX_SPI_MODE_CFG);
404 writel(chcfg, regs + S3C64XX_SPI_CH_CFG);
405 }
406
407 static inline void enable_cs(struct s3c64xx_spi_driver_data *sdd,
408 struct spi_device *spi)
409 {
410 struct s3c64xx_spi_csinfo *cs;
411
412 if (sdd->tgl_spi != NULL) { /* If last device toggled after mssg */
413 if (sdd->tgl_spi != spi) { /* if last mssg on diff device */
414 /* Deselect the last toggled device */
415 cs = sdd->tgl_spi->controller_data;
416 gpio_set_value(cs->line,
417 spi->mode & SPI_CS_HIGH ? 0 : 1);
418 }
419 sdd->tgl_spi = NULL;
420 }
421
422 cs = spi->controller_data;
423 gpio_set_value(cs->line, spi->mode & SPI_CS_HIGH ? 1 : 0);
424 }
425
426 static int wait_for_xfer(struct s3c64xx_spi_driver_data *sdd,
427 struct spi_transfer *xfer, int dma_mode)
428 {
429 void __iomem *regs = sdd->regs;
430 unsigned long val;
431 int ms;
432
433 /* millisecs to xfer 'len' bytes @ 'cur_speed' */
434 ms = xfer->len * 8 * 1000 / sdd->cur_speed;
435 ms += 10; /* some tolerance */
436
437 if (dma_mode) {
438 val = msecs_to_jiffies(ms) + 10;
439 val = wait_for_completion_timeout(&sdd->xfer_completion, val);
440 } else {
441 u32 status;
442 val = msecs_to_loops(ms);
443 do {
444 status = readl(regs + S3C64XX_SPI_STATUS);
445 } while (RX_FIFO_LVL(status, sdd) < xfer->len && --val);
446 }
447
448 if (!val)
449 return -EIO;
450
451 if (dma_mode) {
452 u32 status;
453
454 /*
455 * DmaTx returns after simply writing data in the FIFO,
456 * w/o waiting for real transmission on the bus to finish.
457 * DmaRx returns only after Dma read data from FIFO which
458 * needs bus transmission to finish, so we don't worry if
459 * Xfer involved Rx(with or without Tx).
460 */
461 if (xfer->rx_buf == NULL) {
462 val = msecs_to_loops(10);
463 status = readl(regs + S3C64XX_SPI_STATUS);
464 while ((TX_FIFO_LVL(status, sdd)
465 || !S3C64XX_SPI_ST_TX_DONE(status, sdd))
466 && --val) {
467 cpu_relax();
468 status = readl(regs + S3C64XX_SPI_STATUS);
469 }
470
471 if (!val)
472 return -EIO;
473 }
474 } else {
475 /* If it was only Tx */
476 if (xfer->rx_buf == NULL) {
477 sdd->state &= ~TXBUSY;
478 return 0;
479 }
480
481 switch (sdd->cur_bpw) {
482 case 32:
483 ioread32_rep(regs + S3C64XX_SPI_RX_DATA,
484 xfer->rx_buf, xfer->len / 4);
485 break;
486 case 16:
487 ioread16_rep(regs + S3C64XX_SPI_RX_DATA,
488 xfer->rx_buf, xfer->len / 2);
489 break;
490 default:
491 ioread8_rep(regs + S3C64XX_SPI_RX_DATA,
492 xfer->rx_buf, xfer->len);
493 break;
494 }
495 sdd->state &= ~RXBUSY;
496 }
497
498 return 0;
499 }
500
501 static inline void disable_cs(struct s3c64xx_spi_driver_data *sdd,
502 struct spi_device *spi)
503 {
504 struct s3c64xx_spi_csinfo *cs = spi->controller_data;
505
506 if (sdd->tgl_spi == spi)
507 sdd->tgl_spi = NULL;
508
509 gpio_set_value(cs->line, spi->mode & SPI_CS_HIGH ? 0 : 1);
510 }
511
512 static void s3c64xx_spi_config(struct s3c64xx_spi_driver_data *sdd)
513 {
514 void __iomem *regs = sdd->regs;
515 u32 val;
516
517 /* Disable Clock */
518 if (sdd->port_conf->clk_from_cmu) {
519 clk_disable(sdd->src_clk);
520 } else {
521 val = readl(regs + S3C64XX_SPI_CLK_CFG);
522 val &= ~S3C64XX_SPI_ENCLK_ENABLE;
523 writel(val, regs + S3C64XX_SPI_CLK_CFG);
524 }
525
526 /* Set Polarity and Phase */
527 val = readl(regs + S3C64XX_SPI_CH_CFG);
528 val &= ~(S3C64XX_SPI_CH_SLAVE |
529 S3C64XX_SPI_CPOL_L |
530 S3C64XX_SPI_CPHA_B);
531
532 if (sdd->cur_mode & SPI_CPOL)
533 val |= S3C64XX_SPI_CPOL_L;
534
535 if (sdd->cur_mode & SPI_CPHA)
536 val |= S3C64XX_SPI_CPHA_B;
537
538 writel(val, regs + S3C64XX_SPI_CH_CFG);
539
540 /* Set Channel & DMA Mode */
541 val = readl(regs + S3C64XX_SPI_MODE_CFG);
542 val &= ~(S3C64XX_SPI_MODE_BUS_TSZ_MASK
543 | S3C64XX_SPI_MODE_CH_TSZ_MASK);
544
545 switch (sdd->cur_bpw) {
546 case 32:
547 val |= S3C64XX_SPI_MODE_BUS_TSZ_WORD;
548 val |= S3C64XX_SPI_MODE_CH_TSZ_WORD;
549 break;
550 case 16:
551 val |= S3C64XX_SPI_MODE_BUS_TSZ_HALFWORD;
552 val |= S3C64XX_SPI_MODE_CH_TSZ_HALFWORD;
553 break;
554 default:
555 val |= S3C64XX_SPI_MODE_BUS_TSZ_BYTE;
556 val |= S3C64XX_SPI_MODE_CH_TSZ_BYTE;
557 break;
558 }
559
560 writel(val, regs + S3C64XX_SPI_MODE_CFG);
561
562 if (sdd->port_conf->clk_from_cmu) {
563 /* Configure Clock */
564 /* There is half-multiplier before the SPI */
565 clk_set_rate(sdd->src_clk, sdd->cur_speed * 2);
566 /* Enable Clock */
567 clk_enable(sdd->src_clk);
568 } else {
569 /* Configure Clock */
570 val = readl(regs + S3C64XX_SPI_CLK_CFG);
571 val &= ~S3C64XX_SPI_PSR_MASK;
572 val |= ((clk_get_rate(sdd->src_clk) / sdd->cur_speed / 2 - 1)
573 & S3C64XX_SPI_PSR_MASK);
574 writel(val, regs + S3C64XX_SPI_CLK_CFG);
575
576 /* Enable Clock */
577 val = readl(regs + S3C64XX_SPI_CLK_CFG);
578 val |= S3C64XX_SPI_ENCLK_ENABLE;
579 writel(val, regs + S3C64XX_SPI_CLK_CFG);
580 }
581 }
582
583 #define XFER_DMAADDR_INVALID DMA_BIT_MASK(32)
584
585 static int s3c64xx_spi_map_mssg(struct s3c64xx_spi_driver_data *sdd,
586 struct spi_message *msg)
587 {
588 struct device *dev = &sdd->pdev->dev;
589 struct spi_transfer *xfer;
590
591 if (msg->is_dma_mapped)
592 return 0;
593
594 /* First mark all xfer unmapped */
595 list_for_each_entry(xfer, &msg->transfers, transfer_list) {
596 xfer->rx_dma = XFER_DMAADDR_INVALID;
597 xfer->tx_dma = XFER_DMAADDR_INVALID;
598 }
599
600 /* Map until end or first fail */
601 list_for_each_entry(xfer, &msg->transfers, transfer_list) {
602
603 if (xfer->len <= ((FIFO_LVL_MASK(sdd) >> 1) + 1))
604 continue;
605
606 if (xfer->tx_buf != NULL) {
607 xfer->tx_dma = dma_map_single(dev,
608 (void *)xfer->tx_buf, xfer->len,
609 DMA_TO_DEVICE);
610 if (dma_mapping_error(dev, xfer->tx_dma)) {
611 dev_err(dev, "dma_map_single Tx failed\n");
612 xfer->tx_dma = XFER_DMAADDR_INVALID;
613 return -ENOMEM;
614 }
615 }
616
617 if (xfer->rx_buf != NULL) {
618 xfer->rx_dma = dma_map_single(dev, xfer->rx_buf,
619 xfer->len, DMA_FROM_DEVICE);
620 if (dma_mapping_error(dev, xfer->rx_dma)) {
621 dev_err(dev, "dma_map_single Rx failed\n");
622 dma_unmap_single(dev, xfer->tx_dma,
623 xfer->len, DMA_TO_DEVICE);
624 xfer->tx_dma = XFER_DMAADDR_INVALID;
625 xfer->rx_dma = XFER_DMAADDR_INVALID;
626 return -ENOMEM;
627 }
628 }
629 }
630
631 return 0;
632 }
633
634 static void s3c64xx_spi_unmap_mssg(struct s3c64xx_spi_driver_data *sdd,
635 struct spi_message *msg)
636 {
637 struct device *dev = &sdd->pdev->dev;
638 struct spi_transfer *xfer;
639
640 if (msg->is_dma_mapped)
641 return;
642
643 list_for_each_entry(xfer, &msg->transfers, transfer_list) {
644
645 if (xfer->len <= ((FIFO_LVL_MASK(sdd) >> 1) + 1))
646 continue;
647
648 if (xfer->rx_buf != NULL
649 && xfer->rx_dma != XFER_DMAADDR_INVALID)
650 dma_unmap_single(dev, xfer->rx_dma,
651 xfer->len, DMA_FROM_DEVICE);
652
653 if (xfer->tx_buf != NULL
654 && xfer->tx_dma != XFER_DMAADDR_INVALID)
655 dma_unmap_single(dev, xfer->tx_dma,
656 xfer->len, DMA_TO_DEVICE);
657 }
658 }
659
660 static int s3c64xx_spi_transfer_one_message(struct spi_master *master,
661 struct spi_message *msg)
662 {
663 struct s3c64xx_spi_driver_data *sdd = spi_master_get_devdata(master);
664 struct spi_device *spi = msg->spi;
665 struct s3c64xx_spi_csinfo *cs = spi->controller_data;
666 struct spi_transfer *xfer;
667 int status = 0, cs_toggle = 0;
668 u32 speed;
669 u8 bpw;
670
671 /* If Master's(controller) state differs from that needed by Slave */
672 if (sdd->cur_speed != spi->max_speed_hz
673 || sdd->cur_mode != spi->mode
674 || sdd->cur_bpw != spi->bits_per_word) {
675 sdd->cur_bpw = spi->bits_per_word;
676 sdd->cur_speed = spi->max_speed_hz;
677 sdd->cur_mode = spi->mode;
678 s3c64xx_spi_config(sdd);
679 }
680
681 /* Map all the transfers if needed */
682 if (s3c64xx_spi_map_mssg(sdd, msg)) {
683 dev_err(&spi->dev,
684 "Xfer: Unable to map message buffers!\n");
685 status = -ENOMEM;
686 goto out;
687 }
688
689 /* Configure feedback delay */
690 writel(cs->fb_delay & 0x3, sdd->regs + S3C64XX_SPI_FB_CLK);
691
692 list_for_each_entry(xfer, &msg->transfers, transfer_list) {
693
694 unsigned long flags;
695 int use_dma;
696
697 INIT_COMPLETION(sdd->xfer_completion);
698
699 /* Only BPW and Speed may change across transfers */
700 bpw = xfer->bits_per_word ? : spi->bits_per_word;
701 speed = xfer->speed_hz ? : spi->max_speed_hz;
702
703 if (xfer->len % (bpw / 8)) {
704 dev_err(&spi->dev,
705 "Xfer length(%u) not a multiple of word size(%u)\n",
706 xfer->len, bpw / 8);
707 status = -EIO;
708 goto out;
709 }
710
711 if (bpw != sdd->cur_bpw || speed != sdd->cur_speed) {
712 sdd->cur_bpw = bpw;
713 sdd->cur_speed = speed;
714 s3c64xx_spi_config(sdd);
715 }
716
717 /* Polling method for xfers not bigger than FIFO capacity */
718 if (xfer->len <= ((FIFO_LVL_MASK(sdd) >> 1) + 1))
719 use_dma = 0;
720 else
721 use_dma = 1;
722
723 spin_lock_irqsave(&sdd->lock, flags);
724
725 /* Pending only which is to be done */
726 sdd->state &= ~RXBUSY;
727 sdd->state &= ~TXBUSY;
728
729 enable_datapath(sdd, spi, xfer, use_dma);
730
731 /* Slave Select */
732 enable_cs(sdd, spi);
733
734 /* Start the signals */
735 writel(0, sdd->regs + S3C64XX_SPI_SLAVE_SEL);
736
737 spin_unlock_irqrestore(&sdd->lock, flags);
738
739 status = wait_for_xfer(sdd, xfer, use_dma);
740
741 /* Quiese the signals */
742 writel(S3C64XX_SPI_SLAVE_SIG_INACT,
743 sdd->regs + S3C64XX_SPI_SLAVE_SEL);
744
745 if (status) {
746 dev_err(&spi->dev, "I/O Error: "
747 "rx-%d tx-%d res:rx-%c tx-%c len-%d\n",
748 xfer->rx_buf ? 1 : 0, xfer->tx_buf ? 1 : 0,
749 (sdd->state & RXBUSY) ? 'f' : 'p',
750 (sdd->state & TXBUSY) ? 'f' : 'p',
751 xfer->len);
752
753 if (use_dma) {
754 if (xfer->tx_buf != NULL
755 && (sdd->state & TXBUSY))
756 sdd->ops->stop(sdd->tx_dma.ch);
757 if (xfer->rx_buf != NULL
758 && (sdd->state & RXBUSY))
759 sdd->ops->stop(sdd->rx_dma.ch);
760 }
761
762 goto out;
763 }
764
765 if (xfer->delay_usecs)
766 udelay(xfer->delay_usecs);
767
768 if (xfer->cs_change) {
769 /* Hint that the next mssg is gonna be
770 for the same device */
771 if (list_is_last(&xfer->transfer_list,
772 &msg->transfers))
773 cs_toggle = 1;
774 else
775 disable_cs(sdd, spi);
776 }
777
778 msg->actual_length += xfer->len;
779
780 flush_fifo(sdd);
781 }
782
783 out:
784 if (!cs_toggle || status)
785 disable_cs(sdd, spi);
786 else
787 sdd->tgl_spi = spi;
788
789 s3c64xx_spi_unmap_mssg(sdd, msg);
790
791 msg->status = status;
792
793 spi_finalize_current_message(master);
794
795 return 0;
796 }
797
798 static int s3c64xx_spi_prepare_transfer(struct spi_master *spi)
799 {
800 struct s3c64xx_spi_driver_data *sdd = spi_master_get_devdata(spi);
801
802 /* Acquire DMA channels */
803 while (!acquire_dma(sdd))
804 msleep(10);
805
806 pm_runtime_get_sync(&sdd->pdev->dev);
807
808 return 0;
809 }
810
811 static int s3c64xx_spi_unprepare_transfer(struct spi_master *spi)
812 {
813 struct s3c64xx_spi_driver_data *sdd = spi_master_get_devdata(spi);
814
815 /* Free DMA channels */
816 sdd->ops->release(sdd->rx_dma.ch, &s3c64xx_spi_dma_client);
817 sdd->ops->release(sdd->tx_dma.ch, &s3c64xx_spi_dma_client);
818
819 pm_runtime_put(&sdd->pdev->dev);
820
821 return 0;
822 }
823
824 static struct s3c64xx_spi_csinfo *s3c64xx_get_slave_ctrldata(
825 struct s3c64xx_spi_driver_data *sdd,
826 struct spi_device *spi)
827 {
828 struct s3c64xx_spi_csinfo *cs;
829 struct device_node *slave_np, *data_np;
830 u32 fb_delay = 0;
831
832 slave_np = spi->dev.of_node;
833 if (!slave_np) {
834 dev_err(&spi->dev, "device node not found\n");
835 return ERR_PTR(-EINVAL);
836 }
837
838 for_each_child_of_node(slave_np, data_np)
839 if (!strcmp(data_np->name, "controller-data"))
840 break;
841 if (!data_np) {
842 dev_err(&spi->dev, "child node 'controller-data' not found\n");
843 return ERR_PTR(-EINVAL);
844 }
845
846 cs = kzalloc(sizeof(*cs), GFP_KERNEL);
847 if (!cs) {
848 dev_err(&spi->dev, "could not allocate memory for controller"
849 " data\n");
850 return ERR_PTR(-ENOMEM);
851 }
852
853 cs->line = of_get_named_gpio(data_np, "cs-gpio", 0);
854 if (!gpio_is_valid(cs->line)) {
855 dev_err(&spi->dev, "chip select gpio is not specified or "
856 "invalid\n");
857 kfree(cs);
858 return ERR_PTR(-EINVAL);
859 }
860
861 of_property_read_u32(data_np, "samsung,spi-feedback-delay", &fb_delay);
862 cs->fb_delay = fb_delay;
863 return cs;
864 }
865
866 /*
867 * Here we only check the validity of requested configuration
868 * and save the configuration in a local data-structure.
869 * The controller is actually configured only just before we
870 * get a message to transfer.
871 */
872 static int s3c64xx_spi_setup(struct spi_device *spi)
873 {
874 struct s3c64xx_spi_csinfo *cs = spi->controller_data;
875 struct s3c64xx_spi_driver_data *sdd;
876 struct s3c64xx_spi_info *sci;
877 struct spi_message *msg;
878 unsigned long flags;
879 int err;
880
881 sdd = spi_master_get_devdata(spi->master);
882 if (!cs && spi->dev.of_node) {
883 cs = s3c64xx_get_slave_ctrldata(sdd, spi);
884 spi->controller_data = cs;
885 }
886
887 if (IS_ERR_OR_NULL(cs)) {
888 dev_err(&spi->dev, "No CS for SPI(%d)\n", spi->chip_select);
889 return -ENODEV;
890 }
891
892 if (!spi_get_ctldata(spi)) {
893 err = gpio_request_one(cs->line, GPIOF_OUT_INIT_HIGH,
894 dev_name(&spi->dev));
895 if (err) {
896 dev_err(&spi->dev,
897 "Failed to get /CS gpio [%d]: %d\n",
898 cs->line, err);
899 goto err_gpio_req;
900 }
901 spi_set_ctldata(spi, cs);
902 }
903
904 sci = sdd->cntrlr_info;
905
906 spin_lock_irqsave(&sdd->lock, flags);
907
908 list_for_each_entry(msg, &sdd->queue, queue) {
909 /* Is some mssg is already queued for this device */
910 if (msg->spi == spi) {
911 dev_err(&spi->dev,
912 "setup: attempt while mssg in queue!\n");
913 spin_unlock_irqrestore(&sdd->lock, flags);
914 err = -EBUSY;
915 goto err_msgq;
916 }
917 }
918
919 spin_unlock_irqrestore(&sdd->lock, flags);
920
921 if (spi->bits_per_word != 8
922 && spi->bits_per_word != 16
923 && spi->bits_per_word != 32) {
924 dev_err(&spi->dev, "setup: %dbits/wrd not supported!\n",
925 spi->bits_per_word);
926 err = -EINVAL;
927 goto setup_exit;
928 }
929
930 pm_runtime_get_sync(&sdd->pdev->dev);
931
932 /* Check if we can provide the requested rate */
933 if (!sdd->port_conf->clk_from_cmu) {
934 u32 psr, speed;
935
936 /* Max possible */
937 speed = clk_get_rate(sdd->src_clk) / 2 / (0 + 1);
938
939 if (spi->max_speed_hz > speed)
940 spi->max_speed_hz = speed;
941
942 psr = clk_get_rate(sdd->src_clk) / 2 / spi->max_speed_hz - 1;
943 psr &= S3C64XX_SPI_PSR_MASK;
944 if (psr == S3C64XX_SPI_PSR_MASK)
945 psr--;
946
947 speed = clk_get_rate(sdd->src_clk) / 2 / (psr + 1);
948 if (spi->max_speed_hz < speed) {
949 if (psr+1 < S3C64XX_SPI_PSR_MASK) {
950 psr++;
951 } else {
952 err = -EINVAL;
953 goto setup_exit;
954 }
955 }
956
957 speed = clk_get_rate(sdd->src_clk) / 2 / (psr + 1);
958 if (spi->max_speed_hz >= speed) {
959 spi->max_speed_hz = speed;
960 } else {
961 err = -EINVAL;
962 goto setup_exit;
963 }
964 }
965
966 pm_runtime_put(&sdd->pdev->dev);
967 disable_cs(sdd, spi);
968 return 0;
969
970 setup_exit:
971 /* setup() returns with device de-selected */
972 disable_cs(sdd, spi);
973
974 err_msgq:
975 gpio_free(cs->line);
976 spi_set_ctldata(spi, NULL);
977
978 err_gpio_req:
979 kfree(cs);
980
981 return err;
982 }
983
984 static void s3c64xx_spi_cleanup(struct spi_device *spi)
985 {
986 struct s3c64xx_spi_csinfo *cs = spi_get_ctldata(spi);
987
988 if (cs) {
989 gpio_free(cs->line);
990 if (spi->dev.of_node)
991 kfree(cs);
992 }
993 spi_set_ctldata(spi, NULL);
994 }
995
996 static irqreturn_t s3c64xx_spi_irq(int irq, void *data)
997 {
998 struct s3c64xx_spi_driver_data *sdd = data;
999 struct spi_master *spi = sdd->master;
1000 unsigned int val;
1001
1002 val = readl(sdd->regs + S3C64XX_SPI_PENDING_CLR);
1003
1004 val &= S3C64XX_SPI_PND_RX_OVERRUN_CLR |
1005 S3C64XX_SPI_PND_RX_UNDERRUN_CLR |
1006 S3C64XX_SPI_PND_TX_OVERRUN_CLR |
1007 S3C64XX_SPI_PND_TX_UNDERRUN_CLR;
1008
1009 writel(val, sdd->regs + S3C64XX_SPI_PENDING_CLR);
1010
1011 if (val & S3C64XX_SPI_PND_RX_OVERRUN_CLR)
1012 dev_err(&spi->dev, "RX overrun\n");
1013 if (val & S3C64XX_SPI_PND_RX_UNDERRUN_CLR)
1014 dev_err(&spi->dev, "RX underrun\n");
1015 if (val & S3C64XX_SPI_PND_TX_OVERRUN_CLR)
1016 dev_err(&spi->dev, "TX overrun\n");
1017 if (val & S3C64XX_SPI_PND_TX_UNDERRUN_CLR)
1018 dev_err(&spi->dev, "TX underrun\n");
1019
1020 return IRQ_HANDLED;
1021 }
1022
1023 static void s3c64xx_spi_hwinit(struct s3c64xx_spi_driver_data *sdd, int channel)
1024 {
1025 struct s3c64xx_spi_info *sci = sdd->cntrlr_info;
1026 void __iomem *regs = sdd->regs;
1027 unsigned int val;
1028
1029 sdd->cur_speed = 0;
1030
1031 writel(S3C64XX_SPI_SLAVE_SIG_INACT, sdd->regs + S3C64XX_SPI_SLAVE_SEL);
1032
1033 /* Disable Interrupts - we use Polling if not DMA mode */
1034 writel(0, regs + S3C64XX_SPI_INT_EN);
1035
1036 if (!sdd->port_conf->clk_from_cmu)
1037 writel(sci->src_clk_nr << S3C64XX_SPI_CLKSEL_SRCSHFT,
1038 regs + S3C64XX_SPI_CLK_CFG);
1039 writel(0, regs + S3C64XX_SPI_MODE_CFG);
1040 writel(0, regs + S3C64XX_SPI_PACKET_CNT);
1041
1042 /* Clear any irq pending bits */
1043 writel(readl(regs + S3C64XX_SPI_PENDING_CLR),
1044 regs + S3C64XX_SPI_PENDING_CLR);
1045
1046 writel(0, regs + S3C64XX_SPI_SWAP_CFG);
1047
1048 val = readl(regs + S3C64XX_SPI_MODE_CFG);
1049 val &= ~S3C64XX_SPI_MODE_4BURST;
1050 val &= ~(S3C64XX_SPI_MAX_TRAILCNT << S3C64XX_SPI_TRAILCNT_OFF);
1051 val |= (S3C64XX_SPI_TRAILCNT << S3C64XX_SPI_TRAILCNT_OFF);
1052 writel(val, regs + S3C64XX_SPI_MODE_CFG);
1053
1054 flush_fifo(sdd);
1055 }
1056
1057 static int __devinit s3c64xx_spi_get_dmares(
1058 struct s3c64xx_spi_driver_data *sdd, bool tx)
1059 {
1060 struct platform_device *pdev = sdd->pdev;
1061 struct s3c64xx_spi_dma_data *dma_data;
1062 struct property *prop;
1063 struct resource *res;
1064 char prop_name[15], *chan_str;
1065
1066 if (tx) {
1067 dma_data = &sdd->tx_dma;
1068 dma_data->direction = DMA_TO_DEVICE;
1069 chan_str = "tx";
1070 } else {
1071 dma_data = &sdd->rx_dma;
1072 dma_data->direction = DMA_FROM_DEVICE;
1073 chan_str = "rx";
1074 }
1075
1076 if (!sdd->pdev->dev.of_node) {
1077 res = platform_get_resource(pdev, IORESOURCE_DMA, tx ? 0 : 1);
1078 if (!res) {
1079 dev_err(&pdev->dev, "Unable to get SPI-%s dma "
1080 "resource\n", chan_str);
1081 return -ENXIO;
1082 }
1083 dma_data->dmach = res->start;
1084 return 0;
1085 }
1086
1087 sprintf(prop_name, "%s-dma-channel", chan_str);
1088 prop = of_find_property(pdev->dev.of_node, prop_name, NULL);
1089 if (!prop) {
1090 dev_err(&pdev->dev, "%s dma channel property not specified\n",
1091 chan_str);
1092 return -ENXIO;
1093 }
1094
1095 dma_data->dmach = DMACH_DT_PROP;
1096 dma_data->dma_prop = prop;
1097 return 0;
1098 }
1099
1100 #ifdef CONFIG_OF
1101 static int s3c64xx_spi_parse_dt_gpio(struct s3c64xx_spi_driver_data *sdd)
1102 {
1103 struct device *dev = &sdd->pdev->dev;
1104 int idx, gpio, ret;
1105
1106 /* find gpios for mosi, miso and clock lines */
1107 for (idx = 0; idx < 3; idx++) {
1108 gpio = of_get_gpio(dev->of_node, idx);
1109 if (!gpio_is_valid(gpio)) {
1110 dev_err(dev, "invalid gpio[%d]: %d\n", idx, gpio);
1111 goto free_gpio;
1112 }
1113
1114 ret = gpio_request(gpio, "spi-bus");
1115 if (ret) {
1116 dev_err(dev, "gpio [%d] request failed: %d\n",
1117 gpio, ret);
1118 goto free_gpio;
1119 }
1120 }
1121 return 0;
1122
1123 free_gpio:
1124 while (--idx >= 0)
1125 gpio_free(sdd->gpios[idx]);
1126 return -EINVAL;
1127 }
1128
1129 static void s3c64xx_spi_dt_gpio_free(struct s3c64xx_spi_driver_data *sdd)
1130 {
1131 unsigned int idx;
1132 for (idx = 0; idx < 3; idx++)
1133 gpio_free(sdd->gpios[idx]);
1134 }
1135
1136 static struct __devinit s3c64xx_spi_info * s3c64xx_spi_parse_dt(
1137 struct device *dev)
1138 {
1139 struct s3c64xx_spi_info *sci;
1140 u32 temp;
1141
1142 sci = devm_kzalloc(dev, sizeof(*sci), GFP_KERNEL);
1143 if (!sci) {
1144 dev_err(dev, "memory allocation for spi_info failed\n");
1145 return ERR_PTR(-ENOMEM);
1146 }
1147
1148 if (of_property_read_u32(dev->of_node, "samsung,spi-src-clk", &temp)) {
1149 dev_warn(dev, "spi bus clock parent not specified, using "
1150 "clock at index 0 as parent\n");
1151 sci->src_clk_nr = 0;
1152 } else {
1153 sci->src_clk_nr = temp;
1154 }
1155
1156 if (of_property_read_u32(dev->of_node, "num-cs", &temp)) {
1157 dev_warn(dev, "number of chip select lines not specified, "
1158 "assuming 1 chip select line\n");
1159 sci->num_cs = 1;
1160 } else {
1161 sci->num_cs = temp;
1162 }
1163
1164 return sci;
1165 }
1166 #else
1167 static struct s3c64xx_spi_info *s3c64xx_spi_parse_dt(struct device *dev)
1168 {
1169 return dev->platform_data;
1170 }
1171
1172 static int s3c64xx_spi_parse_dt_gpio(struct s3c64xx_spi_driver_data *sdd)
1173 {
1174 return -EINVAL;
1175 }
1176
1177 static void s3c64xx_spi_dt_gpio_free(struct s3c64xx_spi_driver_data *sdd)
1178 {
1179 }
1180 #endif
1181
1182 static const struct of_device_id s3c64xx_spi_dt_match[];
1183
1184 static inline struct s3c64xx_spi_port_config *s3c64xx_spi_get_port_config(
1185 struct platform_device *pdev)
1186 {
1187 #ifdef CONFIG_OF
1188 if (pdev->dev.of_node) {
1189 const struct of_device_id *match;
1190 match = of_match_node(s3c64xx_spi_dt_match, pdev->dev.of_node);
1191 return (struct s3c64xx_spi_port_config *)match->data;
1192 }
1193 #endif
1194 return (struct s3c64xx_spi_port_config *)
1195 platform_get_device_id(pdev)->driver_data;
1196 }
1197
1198 static int __init s3c64xx_spi_probe(struct platform_device *pdev)
1199 {
1200 struct resource *mem_res;
1201 struct s3c64xx_spi_driver_data *sdd;
1202 struct s3c64xx_spi_info *sci = pdev->dev.platform_data;
1203 struct spi_master *master;
1204 int ret, irq;
1205 char clk_name[16];
1206
1207 if (!sci && pdev->dev.of_node) {
1208 sci = s3c64xx_spi_parse_dt(&pdev->dev);
1209 if (IS_ERR(sci))
1210 return PTR_ERR(sci);
1211 }
1212
1213 if (!sci) {
1214 dev_err(&pdev->dev, "platform_data missing!\n");
1215 return -ENODEV;
1216 }
1217
1218 mem_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
1219 if (mem_res == NULL) {
1220 dev_err(&pdev->dev, "Unable to get SPI MEM resource\n");
1221 return -ENXIO;
1222 }
1223
1224 irq = platform_get_irq(pdev, 0);
1225 if (irq < 0) {
1226 dev_warn(&pdev->dev, "Failed to get IRQ: %d\n", irq);
1227 return irq;
1228 }
1229
1230 master = spi_alloc_master(&pdev->dev,
1231 sizeof(struct s3c64xx_spi_driver_data));
1232 if (master == NULL) {
1233 dev_err(&pdev->dev, "Unable to allocate SPI Master\n");
1234 return -ENOMEM;
1235 }
1236
1237 platform_set_drvdata(pdev, master);
1238
1239 sdd = spi_master_get_devdata(master);
1240 sdd->port_conf = s3c64xx_spi_get_port_config(pdev);
1241 sdd->master = master;
1242 sdd->cntrlr_info = sci;
1243 sdd->pdev = pdev;
1244 sdd->sfr_start = mem_res->start;
1245 if (pdev->dev.of_node) {
1246 ret = of_alias_get_id(pdev->dev.of_node, "spi");
1247 if (ret < 0) {
1248 dev_err(&pdev->dev, "failed to get alias id, "
1249 "errno %d\n", ret);
1250 goto err0;
1251 }
1252 sdd->port_id = ret;
1253 } else {
1254 sdd->port_id = pdev->id;
1255 }
1256
1257 sdd->cur_bpw = 8;
1258
1259 ret = s3c64xx_spi_get_dmares(sdd, true);
1260 if (ret)
1261 goto err0;
1262
1263 ret = s3c64xx_spi_get_dmares(sdd, false);
1264 if (ret)
1265 goto err0;
1266
1267 master->dev.of_node = pdev->dev.of_node;
1268 master->bus_num = sdd->port_id;
1269 master->setup = s3c64xx_spi_setup;
1270 master->cleanup = s3c64xx_spi_cleanup;
1271 master->prepare_transfer_hardware = s3c64xx_spi_prepare_transfer;
1272 master->transfer_one_message = s3c64xx_spi_transfer_one_message;
1273 master->unprepare_transfer_hardware = s3c64xx_spi_unprepare_transfer;
1274 master->num_chipselect = sci->num_cs;
1275 master->dma_alignment = 8;
1276 /* the spi->mode bits understood by this driver: */
1277 master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH;
1278
1279 sdd->regs = devm_request_and_ioremap(&pdev->dev, mem_res);
1280 if (sdd->regs == NULL) {
1281 dev_err(&pdev->dev, "Unable to remap IO\n");
1282 ret = -ENXIO;
1283 goto err1;
1284 }
1285
1286 if (!sci->cfg_gpio && pdev->dev.of_node) {
1287 if (s3c64xx_spi_parse_dt_gpio(sdd))
1288 return -EBUSY;
1289 } else if (sci->cfg_gpio == NULL || sci->cfg_gpio()) {
1290 dev_err(&pdev->dev, "Unable to config gpio\n");
1291 ret = -EBUSY;
1292 goto err2;
1293 }
1294
1295 /* Setup clocks */
1296 sdd->clk = clk_get(&pdev->dev, "spi");
1297 if (IS_ERR(sdd->clk)) {
1298 dev_err(&pdev->dev, "Unable to acquire clock 'spi'\n");
1299 ret = PTR_ERR(sdd->clk);
1300 goto err3;
1301 }
1302
1303 if (clk_enable(sdd->clk)) {
1304 dev_err(&pdev->dev, "Couldn't enable clock 'spi'\n");
1305 ret = -EBUSY;
1306 goto err4;
1307 }
1308
1309 sprintf(clk_name, "spi_busclk%d", sci->src_clk_nr);
1310 sdd->src_clk = clk_get(&pdev->dev, clk_name);
1311 if (IS_ERR(sdd->src_clk)) {
1312 dev_err(&pdev->dev,
1313 "Unable to acquire clock '%s'\n", clk_name);
1314 ret = PTR_ERR(sdd->src_clk);
1315 goto err5;
1316 }
1317
1318 if (clk_enable(sdd->src_clk)) {
1319 dev_err(&pdev->dev, "Couldn't enable clock '%s'\n", clk_name);
1320 ret = -EBUSY;
1321 goto err6;
1322 }
1323
1324 /* Setup Deufult Mode */
1325 s3c64xx_spi_hwinit(sdd, sdd->port_id);
1326
1327 spin_lock_init(&sdd->lock);
1328 init_completion(&sdd->xfer_completion);
1329 INIT_LIST_HEAD(&sdd->queue);
1330
1331 ret = request_irq(irq, s3c64xx_spi_irq, 0, "spi-s3c64xx", sdd);
1332 if (ret != 0) {
1333 dev_err(&pdev->dev, "Failed to request IRQ %d: %d\n",
1334 irq, ret);
1335 goto err7;
1336 }
1337
1338 writel(S3C64XX_SPI_INT_RX_OVERRUN_EN | S3C64XX_SPI_INT_RX_UNDERRUN_EN |
1339 S3C64XX_SPI_INT_TX_OVERRUN_EN | S3C64XX_SPI_INT_TX_UNDERRUN_EN,
1340 sdd->regs + S3C64XX_SPI_INT_EN);
1341
1342 if (spi_register_master(master)) {
1343 dev_err(&pdev->dev, "cannot register SPI master\n");
1344 ret = -EBUSY;
1345 goto err8;
1346 }
1347
1348 dev_dbg(&pdev->dev, "Samsung SoC SPI Driver loaded for Bus SPI-%d "
1349 "with %d Slaves attached\n",
1350 sdd->port_id, master->num_chipselect);
1351 dev_dbg(&pdev->dev, "\tIOmem=[0x%x-0x%x]\tDMA=[Rx-%d, Tx-%d]\n",
1352 mem_res->end, mem_res->start,
1353 sdd->rx_dma.dmach, sdd->tx_dma.dmach);
1354
1355 pm_runtime_enable(&pdev->dev);
1356
1357 return 0;
1358
1359 err8:
1360 free_irq(irq, sdd);
1361 err7:
1362 clk_disable(sdd->src_clk);
1363 err6:
1364 clk_put(sdd->src_clk);
1365 err5:
1366 clk_disable(sdd->clk);
1367 err4:
1368 clk_put(sdd->clk);
1369 err3:
1370 if (!sdd->cntrlr_info->cfg_gpio && pdev->dev.of_node)
1371 s3c64xx_spi_dt_gpio_free(sdd);
1372 err2:
1373 err1:
1374 err0:
1375 platform_set_drvdata(pdev, NULL);
1376 spi_master_put(master);
1377
1378 return ret;
1379 }
1380
1381 static int s3c64xx_spi_remove(struct platform_device *pdev)
1382 {
1383 struct spi_master *master = spi_master_get(platform_get_drvdata(pdev));
1384 struct s3c64xx_spi_driver_data *sdd = spi_master_get_devdata(master);
1385
1386 pm_runtime_disable(&pdev->dev);
1387
1388 spi_unregister_master(master);
1389
1390 writel(0, sdd->regs + S3C64XX_SPI_INT_EN);
1391
1392 free_irq(platform_get_irq(pdev, 0), sdd);
1393
1394 clk_disable(sdd->src_clk);
1395 clk_put(sdd->src_clk);
1396
1397 clk_disable(sdd->clk);
1398 clk_put(sdd->clk);
1399
1400 if (!sdd->cntrlr_info->cfg_gpio && pdev->dev.of_node)
1401 s3c64xx_spi_dt_gpio_free(sdd);
1402
1403 platform_set_drvdata(pdev, NULL);
1404 spi_master_put(master);
1405
1406 return 0;
1407 }
1408
1409 #ifdef CONFIG_PM
1410 static int s3c64xx_spi_suspend(struct device *dev)
1411 {
1412 struct spi_master *master = spi_master_get(dev_get_drvdata(dev));
1413 struct s3c64xx_spi_driver_data *sdd = spi_master_get_devdata(master);
1414
1415 spi_master_suspend(master);
1416
1417 /* Disable the clock */
1418 clk_disable(sdd->src_clk);
1419 clk_disable(sdd->clk);
1420
1421 if (!sdd->cntrlr_info->cfg_gpio && dev->of_node)
1422 s3c64xx_spi_dt_gpio_free(sdd);
1423
1424 sdd->cur_speed = 0; /* Output Clock is stopped */
1425
1426 return 0;
1427 }
1428
1429 static int s3c64xx_spi_resume(struct device *dev)
1430 {
1431 struct spi_master *master = spi_master_get(dev_get_drvdata(dev));
1432 struct s3c64xx_spi_driver_data *sdd = spi_master_get_devdata(master);
1433 struct s3c64xx_spi_info *sci = sdd->cntrlr_info;
1434
1435 if (!sci->cfg_gpio && dev->of_node)
1436 s3c64xx_spi_parse_dt_gpio(sdd);
1437 else
1438 sci->cfg_gpio();
1439
1440 /* Enable the clock */
1441 clk_enable(sdd->src_clk);
1442 clk_enable(sdd->clk);
1443
1444 s3c64xx_spi_hwinit(sdd, sdd->port_id);
1445
1446 spi_master_resume(master);
1447
1448 return 0;
1449 }
1450 #endif /* CONFIG_PM */
1451
1452 #ifdef CONFIG_PM_RUNTIME
1453 static int s3c64xx_spi_runtime_suspend(struct device *dev)
1454 {
1455 struct spi_master *master = spi_master_get(dev_get_drvdata(dev));
1456 struct s3c64xx_spi_driver_data *sdd = spi_master_get_devdata(master);
1457
1458 clk_disable(sdd->clk);
1459 clk_disable(sdd->src_clk);
1460
1461 return 0;
1462 }
1463
1464 static int s3c64xx_spi_runtime_resume(struct device *dev)
1465 {
1466 struct spi_master *master = spi_master_get(dev_get_drvdata(dev));
1467 struct s3c64xx_spi_driver_data *sdd = spi_master_get_devdata(master);
1468
1469 clk_enable(sdd->src_clk);
1470 clk_enable(sdd->clk);
1471
1472 return 0;
1473 }
1474 #endif /* CONFIG_PM_RUNTIME */
1475
1476 static const struct dev_pm_ops s3c64xx_spi_pm = {
1477 SET_SYSTEM_SLEEP_PM_OPS(s3c64xx_spi_suspend, s3c64xx_spi_resume)
1478 SET_RUNTIME_PM_OPS(s3c64xx_spi_runtime_suspend,
1479 s3c64xx_spi_runtime_resume, NULL)
1480 };
1481
1482 struct s3c64xx_spi_port_config s3c2443_spi_port_config = {
1483 .fifo_lvl_mask = { 0x7f },
1484 .rx_lvl_offset = 13,
1485 .tx_st_done = 21,
1486 .high_speed = true,
1487 };
1488
1489 struct s3c64xx_spi_port_config s3c6410_spi_port_config = {
1490 .fifo_lvl_mask = { 0x7f, 0x7F },
1491 .rx_lvl_offset = 13,
1492 .tx_st_done = 21,
1493 };
1494
1495 struct s3c64xx_spi_port_config s5p64x0_spi_port_config = {
1496 .fifo_lvl_mask = { 0x1ff, 0x7F },
1497 .rx_lvl_offset = 15,
1498 .tx_st_done = 25,
1499 };
1500
1501 struct s3c64xx_spi_port_config s5pc100_spi_port_config = {
1502 .fifo_lvl_mask = { 0x7f, 0x7F },
1503 .rx_lvl_offset = 13,
1504 .tx_st_done = 21,
1505 .high_speed = true,
1506 };
1507
1508 struct s3c64xx_spi_port_config s5pv210_spi_port_config = {
1509 .fifo_lvl_mask = { 0x1ff, 0x7F },
1510 .rx_lvl_offset = 15,
1511 .tx_st_done = 25,
1512 .high_speed = true,
1513 };
1514
1515 struct s3c64xx_spi_port_config exynos4_spi_port_config = {
1516 .fifo_lvl_mask = { 0x1ff, 0x7F, 0x7F },
1517 .rx_lvl_offset = 15,
1518 .tx_st_done = 25,
1519 .high_speed = true,
1520 .clk_from_cmu = true,
1521 };
1522
1523 static struct platform_device_id s3c64xx_spi_driver_ids[] = {
1524 {
1525 .name = "s3c2443-spi",
1526 .driver_data = (kernel_ulong_t)&s3c2443_spi_port_config,
1527 }, {
1528 .name = "s3c6410-spi",
1529 .driver_data = (kernel_ulong_t)&s3c6410_spi_port_config,
1530 }, {
1531 .name = "s5p64x0-spi",
1532 .driver_data = (kernel_ulong_t)&s5p64x0_spi_port_config,
1533 }, {
1534 .name = "s5pc100-spi",
1535 .driver_data = (kernel_ulong_t)&s5pc100_spi_port_config,
1536 }, {
1537 .name = "s5pv210-spi",
1538 .driver_data = (kernel_ulong_t)&s5pv210_spi_port_config,
1539 }, {
1540 .name = "exynos4210-spi",
1541 .driver_data = (kernel_ulong_t)&exynos4_spi_port_config,
1542 },
1543 { },
1544 };
1545
1546 #ifdef CONFIG_OF
1547 static const struct of_device_id s3c64xx_spi_dt_match[] = {
1548 { .compatible = "samsung,exynos4210-spi",
1549 .data = (void *)&exynos4_spi_port_config,
1550 },
1551 { },
1552 };
1553 MODULE_DEVICE_TABLE(of, s3c64xx_spi_dt_match);
1554 #endif /* CONFIG_OF */
1555
1556 static struct platform_driver s3c64xx_spi_driver = {
1557 .driver = {
1558 .name = "s3c64xx-spi",
1559 .owner = THIS_MODULE,
1560 .pm = &s3c64xx_spi_pm,
1561 .of_match_table = of_match_ptr(s3c64xx_spi_dt_match),
1562 },
1563 .remove = s3c64xx_spi_remove,
1564 .id_table = s3c64xx_spi_driver_ids,
1565 };
1566 MODULE_ALIAS("platform:s3c64xx-spi");
1567
1568 static int __init s3c64xx_spi_init(void)
1569 {
1570 return platform_driver_probe(&s3c64xx_spi_driver, s3c64xx_spi_probe);
1571 }
1572 subsys_initcall(s3c64xx_spi_init);
1573
1574 static void __exit s3c64xx_spi_exit(void)
1575 {
1576 platform_driver_unregister(&s3c64xx_spi_driver);
1577 }
1578 module_exit(s3c64xx_spi_exit);
1579
1580 MODULE_AUTHOR("Jaswinder Singh <jassi.brar@samsung.com>");
1581 MODULE_DESCRIPTION("S3C64XX SPI Controller Driver");
1582 MODULE_LICENSE("GPL");
Linux 2.6 libata-dev (mirror)