arch/blackfin/mach-bf527/boards/ezkit.c

   1 /*
   2  * Copyright 2004-2009 Analog Devices Inc.
   3  *                2005 National ICT Australia (NICTA)
   4  *                      Aidan Williams <aidan@nicta.com.au>
   5  *
   6  * Licensed under the GPL-2 or later.
   7  */
   8
   9 #include <linux/device.h>
  10 #include <linux/platform_device.h>
  11 #include <linux/mtd/mtd.h>
  12 #include <linux/mtd/partitions.h>
  13 #include <linux/mtd/physmap.h>
  14 #include <linux/spi/spi.h>
  15 #include <linux/spi/flash.h>
  16 #include <linux/i2c.h>
  17 #include <linux/irq.h>
  18 #include <linux/interrupt.h>
  19 #include <linux/usb/musb.h>
  20 #include <linux/leds.h>
  21 #include <linux/input.h>
  22 #include <asm/dma.h>
  23 #include <asm/bfin5xx_spi.h>
  24 #include <asm/reboot.h>
  25 #include <asm/nand.h>
  26 #include <asm/portmux.h>
  27 #include <asm/dpmc.h>
  28 #include <linux/spi/ad7877.h>
  29 #include <asm/bfin_sport.h>
  30
  31 /*
  32  * Name the Board for the /proc/cpuinfo
  33  */
  34 #ifdef CONFIG_BFIN527_EZKIT_V2
  35 const char bfin_board_name[] = "ADI BF527-EZKIT V2";
  36 #else
  37 const char bfin_board_name[] = "ADI BF527-EZKIT";
  38 #endif
  39
  40 /*
  41  *  Driver needs to know address, irq and flag pin.
  42  */
  43
  44 #if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE)
  45 #include <linux/usb/isp1760.h>
  46 static struct resource bfin_isp1760_resources[] = {
  47         [0] = {
  48                 .start  = 0x203C0000,
  49                 .end    = 0x203C0000 + 0x000fffff,
  50                 .flags  = IORESOURCE_MEM,
  51         },
  52         [1] = {
  53                 .start  = IRQ_PF7,
  54                 .end    = IRQ_PF7,
  55                 .flags  = IORESOURCE_IRQ,
  56         },
  57 };
  58
  59 static struct isp1760_platform_data isp1760_priv = {
  60         .is_isp1761 = 0,
  61         .bus_width_16 = 1,
  62         .port1_otg = 0,
  63         .analog_oc = 0,
  64         .dack_polarity_high = 0,
  65         .dreq_polarity_high = 0,
  66 };
  67
  68 static struct platform_device bfin_isp1760_device = {
  69         .name           = "isp1760",
  70         .id             = 0,
  71         .dev = {
  72                 .platform_data = &isp1760_priv,
  73         },
  74         .num_resources  = ARRAY_SIZE(bfin_isp1760_resources),
  75         .resource       = bfin_isp1760_resources,
  76 };
  77 #endif
  78
  79 #if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE)
  80 static struct resource musb_resources[] = {
  81         [0] = {
  82                 .start  = 0xffc03800,
  83                 .end    = 0xffc03cff,
  84                 .flags  = IORESOURCE_MEM,
  85         },
  86         [1] = { /* general IRQ */
  87                 .start  = IRQ_USB_INT0,
  88                 .end    = IRQ_USB_INT0,
  89                 .flags  = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
  90                 .name   = "mc"
  91         },
  92         [2] = { /* DMA IRQ */
  93                 .start  = IRQ_USB_DMA,
  94                 .end    = IRQ_USB_DMA,
  95                 .flags  = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
  96                 .name   = "dma"
  97         },
  98 };
  99
 100 static struct musb_hdrc_config musb_config = {
 101         .multipoint     = 0,
 102         .dyn_fifo       = 0,
 103         .soft_con       = 1,
 104         .dma            = 1,
 105         .num_eps        = 8,
 106         .dma_channels   = 8,
 107         .gpio_vrsel     = GPIO_PG13,
 108         /* Some custom boards need to be active low, just set it to "0"
 109          * if it is the case.
 110          */
 111         .gpio_vrsel_active      = 1,
 112         .clkin          = 24,           /* musb CLKIN in MHZ */
 113 };
 114
 115 static struct musb_hdrc_platform_data musb_plat = {
 116 #if defined(CONFIG_USB_MUSB_OTG)
 117         .mode           = MUSB_OTG,
 118 #elif defined(CONFIG_USB_MUSB_HDRC_HCD)
 119         .mode           = MUSB_HOST,
 120 #elif defined(CONFIG_USB_GADGET_MUSB_HDRC)
 121         .mode           = MUSB_PERIPHERAL,
 122 #endif
 123         .config         = &musb_config,
 124 };
 125
 126 static u64 musb_dmamask = ~(u32)0;
 127
 128 static struct platform_device musb_device = {
 129         .name           = "musb-blackfin",
 130         .id             = 0,
 131         .dev = {
 132                 .dma_mask               = &musb_dmamask,
 133                 .coherent_dma_mask      = 0xffffffff,
 134                 .platform_data          = &musb_plat,
 135         },
 136         .num_resources  = ARRAY_SIZE(musb_resources),
 137         .resource       = musb_resources,
 138 };
 139 #endif
 140
 141 #if defined(CONFIG_FB_BFIN_T350MCQB) || defined(CONFIG_FB_BFIN_T350MCQB_MODULE)
 142
 143 static struct resource bf52x_t350mcqb_resources[] = {
 144         {
 145                 .start = IRQ_PPI_ERROR,
 146                 .end = IRQ_PPI_ERROR,
 147                 .flags = IORESOURCE_IRQ,
 148         },
 149 };
 150
 151 static struct platform_device bf52x_t350mcqb_device = {
 152         .name           = "bfin-t350mcqb",
 153         .id             = -1,
 154         .num_resources  = ARRAY_SIZE(bf52x_t350mcqb_resources),
 155         .resource       = bf52x_t350mcqb_resources,
 156 };
 157 #endif
 158
 159 #if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE)
 160 #include <asm/bfin-lq035q1.h>
 161
 162 static struct bfin_lq035q1fb_disp_info bfin_lq035q1_data = {
 163         .mode = LQ035_NORM | LQ035_RGB | LQ035_RL | LQ035_TB,
 164         .ppi_mode = USE_RGB565_8_BIT_PPI,
 165 };
 166
 167 static struct resource bfin_lq035q1_resources[] = {
 168         {
 169                 .start = IRQ_PPI_ERROR,
 170                 .end = IRQ_PPI_ERROR,
 171                 .flags = IORESOURCE_IRQ,
 172         },
 173 };
 174
 175 static struct platform_device bfin_lq035q1_device = {
 176         .name           = "bfin-lq035q1",
 177         .id             = -1,
 178         .num_resources  = ARRAY_SIZE(bfin_lq035q1_resources),
 179         .resource       = bfin_lq035q1_resources,
 180         .dev            = {
 181                 .platform_data = &bfin_lq035q1_data,
 182         },
 183 };
 184 #endif
 185
 186 #if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
 187 static struct mtd_partition ezkit_partitions[] = {
 188         {
 189                 .name       = "bootloader(nor)",
 190                 .size       = 0x40000,
 191                 .offset     = 0,
 192         }, {
 193                 .name       = "linux kernel(nor)",
 194                 .size       = 0x1C0000,
 195                 .offset     = MTDPART_OFS_APPEND,
 196         }, {
 197                 .name       = "file system(nor)",
 198                 .size       = MTDPART_SIZ_FULL,
 199                 .offset     = MTDPART_OFS_APPEND,
 200         }
 201 };
 202
 203 static struct physmap_flash_data ezkit_flash_data = {
 204         .width      = 2,
 205         .parts      = ezkit_partitions,
 206         .nr_parts   = ARRAY_SIZE(ezkit_partitions),
 207 };
 208
 209 static struct resource ezkit_flash_resource = {
 210         .start = 0x20000000,
 211         .end   = 0x203fffff,
 212         .flags = IORESOURCE_MEM,
 213 };
 214
 215 static struct platform_device ezkit_flash_device = {
 216         .name          = "physmap-flash",
 217         .id            = 0,
 218         .dev = {
 219                 .platform_data = &ezkit_flash_data,
 220         },
 221         .num_resources = 1,
 222         .resource      = &ezkit_flash_resource,
 223 };
 224 #endif
 225
 226 #if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE)
 227 static struct mtd_partition partition_info[] = {
 228         {
 229                 .name = "bootloader(nand)",
 230                 .offset = 0,
 231                 .size = 0x40000,
 232         }, {
 233                 .name = "linux kernel(nand)",
 234                 .offset = MTDPART_OFS_APPEND,
 235                 .size = 4 * 1024 * 1024,
 236         },
 237         {
 238                 .name = "file system(nand)",
 239                 .offset = MTDPART_OFS_APPEND,
 240                 .size = MTDPART_SIZ_FULL,
 241         },
 242 };
 243
 244 static struct bf5xx_nand_platform bf5xx_nand_platform = {
 245         .data_width = NFC_NWIDTH_8,
 246         .partitions = partition_info,
 247         .nr_partitions = ARRAY_SIZE(partition_info),
 248         .rd_dly = 3,
 249         .wr_dly = 3,
 250 };
 251
 252 static struct resource bf5xx_nand_resources[] = {
 253         {
 254                 .start = NFC_CTL,
 255                 .end = NFC_DATA_RD + 2,
 256                 .flags = IORESOURCE_MEM,
 257         },
 258         {
 259                 .start = CH_NFC,
 260                 .end = CH_NFC,
 261                 .flags = IORESOURCE_IRQ,
 262         },
 263 };
 264
 265 static struct platform_device bf5xx_nand_device = {
 266         .name = "bf5xx-nand",
 267         .id = 0,
 268         .num_resources = ARRAY_SIZE(bf5xx_nand_resources),
 269         .resource = bf5xx_nand_resources,
 270         .dev = {
 271                 .platform_data = &bf5xx_nand_platform,
 272         },
 273 };
 274 #endif
 275
 276 #if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE)
 277 static struct resource bfin_pcmcia_cf_resources[] = {
 278         {
 279                 .start = 0x20310000, /* IO PORT */
 280                 .end = 0x20312000,
 281                 .flags = IORESOURCE_MEM,
 282         }, {
 283                 .start = 0x20311000, /* Attribute Memory */
 284                 .end = 0x20311FFF,
 285                 .flags = IORESOURCE_MEM,
 286         }, {
 287                 .start = IRQ_PF4,
 288                 .end = IRQ_PF4,
 289                 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
 290         }, {
 291                 .start = 6, /* Card Detect PF6 */
 292                 .end = 6,
 293                 .flags = IORESOURCE_IRQ,
 294         },
 295 };
 296
 297 static struct platform_device bfin_pcmcia_cf_device = {
 298         .name = "bfin_cf_pcmcia",
 299         .id = -1,
 300         .num_resources = ARRAY_SIZE(bfin_pcmcia_cf_resources),
 301         .resource = bfin_pcmcia_cf_resources,
 302 };
 303 #endif
 304
 305 #if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
 306 static struct platform_device rtc_device = {
 307         .name = "rtc-bfin",
 308         .id   = -1,
 309 };
 310 #endif
 311
 312 #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
 313 #include <linux/smc91x.h>
 314
 315 static struct smc91x_platdata smc91x_info = {
 316         .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
 317         .leda = RPC_LED_100_10,
 318         .ledb = RPC_LED_TX_RX,
 319 };
 320
 321 static struct resource smc91x_resources[] = {
 322         {
 323                 .name = "smc91x-regs",
 324                 .start = 0x20300300,
 325                 .end = 0x20300300 + 16,
 326                 .flags = IORESOURCE_MEM,
 327         }, {
 328
 329                 .start = IRQ_PF7,
 330                 .end = IRQ_PF7,
 331                 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
 332         },
 333 };
 334 static struct platform_device smc91x_device = {
 335         .name = "smc91x",
 336         .id = 0,
 337         .num_resources = ARRAY_SIZE(smc91x_resources),
 338         .resource = smc91x_resources,
 339         .dev    = {
 340                 .platform_data  = &smc91x_info,
 341         },
 342 };
 343 #endif
 344
 345 #if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
 346 static struct resource dm9000_resources[] = {
 347         [0] = {
 348                 .start  = 0x203FB800,
 349                 .end    = 0x203FB800 + 1,
 350                 .flags  = IORESOURCE_MEM,
 351         },
 352         [1] = {
 353                 .start  = 0x203FB800 + 4,
 354                 .end    = 0x203FB800 + 5,
 355                 .flags  = IORESOURCE_MEM,
 356         },
 357         [2] = {
 358                 .start  = IRQ_PF9,
 359                 .end    = IRQ_PF9,
 360                 .flags  = (IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE),
 361         },
 362 };
 363
 364 static struct platform_device dm9000_device = {
 365         .name           = "dm9000",
 366         .id             = -1,
 367         .num_resources  = ARRAY_SIZE(dm9000_resources),
 368         .resource       = dm9000_resources,
 369 };
 370 #endif
 371
 372 #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
 373 #include <linux/bfin_mac.h>
 374 static const unsigned short bfin_mac_peripherals[] = P_RMII0;
 375
 376 static struct bfin_phydev_platform_data bfin_phydev_data[] = {
 377         {
 378                 .addr = 1,
 379                 .irq = IRQ_MAC_PHYINT,
 380         },
 381 };
 382
 383 static struct bfin_mii_bus_platform_data bfin_mii_bus_data = {
 384         .phydev_number = 1,
 385         .phydev_data = bfin_phydev_data,
 386         .phy_mode = PHY_INTERFACE_MODE_RMII,
 387         .mac_peripherals = bfin_mac_peripherals,
 388 };
 389
 390 static struct platform_device bfin_mii_bus = {
 391         .name = "bfin_mii_bus",
 392         .dev = {
 393                 .platform_data = &bfin_mii_bus_data,
 394         }
 395 };
 396
 397 static struct platform_device bfin_mac_device = {
 398         .name = "bfin_mac",
 399         .dev = {
 400                 .platform_data = &bfin_mii_bus,
 401         }
 402 };
 403 #endif
 404
 405 #if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
 406 static struct resource net2272_bfin_resources[] = {
 407         {
 408                 .start = 0x20300000,
 409                 .end = 0x20300000 + 0x100,
 410                 .flags = IORESOURCE_MEM,
 411         }, {
 412                 .start = 1,
 413                 .flags = IORESOURCE_BUS,
 414         }, {
 415                 .start = IRQ_PF7,
 416                 .end = IRQ_PF7,
 417                 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
 418         },
 419 };
 420
 421 static struct platform_device net2272_bfin_device = {
 422         .name = "net2272",
 423         .id = -1,
 424         .num_resources = ARRAY_SIZE(net2272_bfin_resources),
 425         .resource = net2272_bfin_resources,
 426 };
 427 #endif
 428
 429 #if defined(CONFIG_MTD_M25P80) \
 430         || defined(CONFIG_MTD_M25P80_MODULE)
 431 static struct mtd_partition bfin_spi_flash_partitions[] = {
 432         {
 433                 .name = "bootloader(spi)",
 434                 .size = 0x00040000,
 435                 .offset = 0,
 436                 .mask_flags = MTD_CAP_ROM
 437         }, {
 438                 .name = "linux kernel(spi)",
 439                 .size = MTDPART_SIZ_FULL,
 440                 .offset = MTDPART_OFS_APPEND,
 441         }
 442 };
 443
 444 static struct flash_platform_data bfin_spi_flash_data = {
 445         .name = "m25p80",
 446         .parts = bfin_spi_flash_partitions,
 447         .nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions),
 448         .type = "m25p16",
 449 };
 450
 451 /* SPI flash chip (m25p64) */
 452 static struct bfin5xx_spi_chip spi_flash_chip_info = {
 453         .enable_dma = 0,         /* use dma transfer with this chip*/
 454 };
 455 #endif
 456
 457 #if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
 458 static struct bfin5xx_spi_chip  mmc_spi_chip_info = {
 459         .enable_dma = 0,
 460 };
 461 #endif
 462
 463 #if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
 464 static const struct ad7877_platform_data bfin_ad7877_ts_info = {
 465         .model                  = 7877,
 466         .vref_delay_usecs       = 50,   /* internal, no capacitor */
 467         .x_plate_ohms           = 419,
 468         .y_plate_ohms           = 486,
 469         .pressure_max           = 1000,
 470         .pressure_min           = 0,
 471         .stopacq_polarity       = 1,
 472         .first_conversion_delay = 3,
 473         .acquisition_time       = 1,
 474         .averaging              = 1,
 475         .pen_down_acc_interval  = 1,
 476 };
 477 #endif
 478
 479 #if defined(CONFIG_TOUCHSCREEN_AD7879) || defined(CONFIG_TOUCHSCREEN_AD7879_MODULE)
 480 #include <linux/spi/ad7879.h>
 481 static const struct ad7879_platform_data bfin_ad7879_ts_info = {
 482         .model                  = 7879, /* Model = AD7879 */
 483         .x_plate_ohms           = 620,  /* 620 Ohm from the touch datasheet */
 484         .pressure_max           = 10000,
 485         .pressure_min           = 0,
 486         .first_conversion_delay = 3,    /* wait 512us before do a first conversion */
 487         .acquisition_time       = 1,    /* 4us acquisition time per sample */
 488         .median                 = 2,    /* do 8 measurements */
 489         .averaging              = 1,    /* take the average of 4 middle samples */
 490         .pen_down_acc_interval  = 255,  /* 9.4 ms */
 491         .gpio_export            = 0,    /* Export GPIO to gpiolib */
 492 };
 493 #endif
 494
 495 #if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE) || \
 496         defined(CONFIG_SND_BF5XX_TDM) || defined(CONFIG_SND_BF5XX_TDM_MODULE)
 497
 498 static const u16 bfin_snd_pin[][7] = {
 499         {P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS,
 500                 P_SPORT0_DRPRI, P_SPORT0_RSCLK, 0, 0},
 501         {P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_RFS,
 502                 P_SPORT1_DRPRI, P_SPORT1_RSCLK, P_SPORT1_TFS, 0},
 503 };
 504
 505 static struct bfin_snd_platform_data bfin_snd_data[] = {
 506         {
 507                 .pin_req = &bfin_snd_pin[0][0],
 508         },
 509         {
 510                 .pin_req = &bfin_snd_pin[1][0],
 511         },
 512 };
 513
 514 #define BFIN_SND_RES(x) \
 515         [x] = { \
 516                 { \
 517                         .start = SPORT##x##_TCR1, \
 518                         .end = SPORT##x##_TCR1, \
 519                         .flags = IORESOURCE_MEM \
 520                 }, \
 521                 { \
 522                         .start = CH_SPORT##x##_RX, \
 523                         .end = CH_SPORT##x##_RX, \
 524                         .flags = IORESOURCE_DMA, \
 525                 }, \
 526                 { \
 527                         .start = CH_SPORT##x##_TX, \
 528                         .end = CH_SPORT##x##_TX, \
 529                         .flags = IORESOURCE_DMA, \
 530                 }, \
 531                 { \
 532                         .start = IRQ_SPORT##x##_ERROR, \
 533                         .end = IRQ_SPORT##x##_ERROR, \
 534                         .flags = IORESOURCE_IRQ, \
 535                 } \
 536         }
 537
 538 static struct resource bfin_snd_resources[][4] = {
 539         BFIN_SND_RES(0),
 540         BFIN_SND_RES(1),
 541 };
 542
 543 static struct platform_device bfin_pcm = {
 544         .name = "bfin-pcm-audio",
 545         .id = -1,
 546 };
 547 #endif
 548
 549 #if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE)
 550 static struct platform_device bfin_i2s = {
 551         .name = "bfin-i2s",
 552         .id = CONFIG_SND_BF5XX_SPORT_NUM,
 553         .num_resources = ARRAY_SIZE(bfin_snd_resources[CONFIG_SND_BF5XX_SPORT_NUM]),
 554         .resource = bfin_snd_resources[CONFIG_SND_BF5XX_SPORT_NUM],
 555         .dev = {
 556                 .platform_data = &bfin_snd_data[CONFIG_SND_BF5XX_SPORT_NUM],
 557         },
 558 };
 559 #endif
 560
 561 #if defined(CONFIG_SND_BF5XX_TDM) || defined(CONFIG_SND_BF5XX_TDM_MODULE)
 562 static struct platform_device bfin_tdm = {
 563         .name = "bfin-tdm",
 564         .id = CONFIG_SND_BF5XX_SPORT_NUM,
 565         .num_resources = ARRAY_SIZE(bfin_snd_resources[CONFIG_SND_BF5XX_SPORT_NUM]),
 566         .resource = bfin_snd_resources[CONFIG_SND_BF5XX_SPORT_NUM],
 567         .dev = {
 568                 .platform_data = &bfin_snd_data[CONFIG_SND_BF5XX_SPORT_NUM],
 569         },
 570 };
 571 #endif
 572
 573 static struct spi_board_info bfin_spi_board_info[] __initdata = {
 574 #if defined(CONFIG_MTD_M25P80) \
 575         || defined(CONFIG_MTD_M25P80_MODULE)
 576         {
 577                 /* the modalias must be the same as spi device driver name */
 578                 .modalias = "m25p80", /* Name of spi_driver for this device */
 579                 .max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
 580                 .bus_num = 0, /* Framework bus number */
 581                 .chip_select = 1, /* Framework chip select. On STAMP537 it is SPISSEL1*/
 582                 .platform_data = &bfin_spi_flash_data,
 583                 .controller_data = &spi_flash_chip_info,
 584                 .mode = SPI_MODE_3,
 585         },
 586 #endif
 587
 588 #if defined(CONFIG_SND_BF5XX_SOC_AD183X) \
 589         || defined(CONFIG_SND_BF5XX_SOC_AD183X_MODULE)
 590         {
 591                 .modalias = "ad183x",
 592                 .max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
 593                 .bus_num = 0,
 594                 .chip_select = 4,
 595                 .platform_data = "ad1836",
 596                 .mode = SPI_MODE_3,
 597         },
 598 #endif
 599 #if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
 600         {
 601                 .modalias = "mmc_spi",
 602                 .max_speed_hz = 20000000,     /* max spi clock (SCK) speed in HZ */
 603                 .bus_num = 0,
 604                 .chip_select = 3,
 605                 .controller_data = &mmc_spi_chip_info,
 606                 .mode = SPI_MODE_0,
 607         },
 608 #endif
 609
 610 #if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
 611         {
 612                 .modalias               = "ad7877",
 613                 .platform_data          = &bfin_ad7877_ts_info,
 614                 .irq                    = IRQ_PF8,
 615                 .max_speed_hz   = 12500000,     /* max spi clock (SCK) speed in HZ */
 616                 .bus_num        = 0,
 617                 .chip_select  = 2,
 618         },
 619 #endif
 620 #if defined(CONFIG_TOUCHSCREEN_AD7879_SPI) || defined(CONFIG_TOUCHSCREEN_AD7879_SPI_MODULE)
 621         {
 622                 .modalias = "ad7879",
 623                 .platform_data = &bfin_ad7879_ts_info,
 624                 .irq = IRQ_PF8,
 625                 .max_speed_hz = 5000000,     /* max spi clock (SCK) speed in HZ */
 626                 .bus_num = 0,
 627                 .chip_select = 3,
 628                 .mode = SPI_CPHA | SPI_CPOL,
 629         },
 630 #endif
 631 #if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
 632         {
 633                 .modalias = "spidev",
 634                 .max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
 635                 .bus_num = 0,
 636                 .chip_select = 1,
 637         },
 638 #endif
 639 #if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE)
 640         {
 641                 .modalias = "bfin-lq035q1-spi",
 642                 .max_speed_hz = 20000000,     /* max spi clock (SCK) speed in HZ */
 643                 .bus_num = 0,
 644                 .chip_select = 7,
 645                 .mode = SPI_CPHA | SPI_CPOL,
 646         },
 647 #endif
 648 };
 649
 650 #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
 651 /* SPI controller data */
 652 static struct bfin5xx_spi_master bfin_spi0_info = {
 653         .num_chipselect = 8,
 654         .enable_dma = 1,  /* master has the ability to do dma transfer */
 655         .pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0},
 656 };
 657
 658 /* SPI (0) */
 659 static struct resource bfin_spi0_resource[] = {
 660         [0] = {
 661                 .start = SPI0_REGBASE,
 662                 .end   = SPI0_REGBASE + 0xFF,
 663                 .flags = IORESOURCE_MEM,
 664                 },
 665         [1] = {
 666                 .start = CH_SPI,
 667                 .end   = CH_SPI,
 668                 .flags = IORESOURCE_DMA,
 669         },
 670         [2] = {
 671                 .start = IRQ_SPI,
 672                 .end   = IRQ_SPI,
 673                 .flags = IORESOURCE_IRQ,
 674         },
 675 };
 676
 677 static struct platform_device bfin_spi0_device = {
 678         .name = "bfin-spi",
 679         .id = 0, /* Bus number */
 680         .num_resources = ARRAY_SIZE(bfin_spi0_resource),
 681         .resource = bfin_spi0_resource,
 682         .dev = {
 683                 .platform_data = &bfin_spi0_info, /* Passed to driver */
 684         },
 685 };
 686 #endif  /* spi master and devices */
 687
 688 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
 689 #ifdef CONFIG_SERIAL_BFIN_UART0
 690 static struct resource bfin_uart0_resources[] = {
 691         {
 692                 .start = UART0_THR,
 693                 .end = UART0_GCTL+2,
 694                 .flags = IORESOURCE_MEM,
 695         },
 696         {
 697                 .start = IRQ_UART0_RX,
 698                 .end = IRQ_UART0_RX+1,
 699                 .flags = IORESOURCE_IRQ,
 700         },
 701         {
 702                 .start = IRQ_UART0_ERROR,
 703                 .end = IRQ_UART0_ERROR,
 704                 .flags = IORESOURCE_IRQ,
 705         },
 706         {
 707                 .start = CH_UART0_TX,
 708                 .end = CH_UART0_TX,
 709                 .flags = IORESOURCE_DMA,
 710         },
 711         {
 712                 .start = CH_UART0_RX,
 713                 .end = CH_UART0_RX,
 714                 .flags = IORESOURCE_DMA,
 715         },
 716 };
 717
 718 static unsigned short bfin_uart0_peripherals[] = {
 719         P_UART0_TX, P_UART0_RX, 0
 720 };
 721
 722 static struct platform_device bfin_uart0_device = {
 723         .name = "bfin-uart",
 724         .id = 0,
 725         .num_resources = ARRAY_SIZE(bfin_uart0_resources),
 726         .resource = bfin_uart0_resources,
 727         .dev = {
 728                 .platform_data = &bfin_uart0_peripherals, /* Passed to driver */
 729         },
 730 };
 731 #endif
 732 #ifdef CONFIG_SERIAL_BFIN_UART1
 733 static struct resource bfin_uart1_resources[] = {
 734         {
 735                 .start = UART1_THR,
 736                 .end = UART1_GCTL+2,
 737                 .flags = IORESOURCE_MEM,
 738         },
 739         {
 740                 .start = IRQ_UART1_RX,
 741                 .end = IRQ_UART1_RX+1,
 742                 .flags = IORESOURCE_IRQ,
 743         },
 744         {
 745                 .start = IRQ_UART1_ERROR,
 746                 .end = IRQ_UART1_ERROR,
 747                 .flags = IORESOURCE_IRQ,
 748         },
 749         {
 750                 .start = CH_UART1_TX,
 751                 .end = CH_UART1_TX,
 752                 .flags = IORESOURCE_DMA,
 753         },
 754         {
 755                 .start = CH_UART1_RX,
 756                 .end = CH_UART1_RX,
 757                 .flags = IORESOURCE_DMA,
 758         },
 759 #ifdef CONFIG_BFIN_UART1_CTSRTS
 760         {       /* CTS pin */
 761                 .start = GPIO_PF9,
 762                 .end = GPIO_PF9,
 763                 .flags = IORESOURCE_IO,
 764         },
 765         {       /* RTS pin */
 766                 .start = GPIO_PF10,
 767                 .end = GPIO_PF10,
 768                 .flags = IORESOURCE_IO,
 769         },
 770 #endif
 771 };
 772
 773 static unsigned short bfin_uart1_peripherals[] = {
 774         P_UART1_TX, P_UART1_RX, 0
 775 };
 776
 777 static struct platform_device bfin_uart1_device = {
 778         .name = "bfin-uart",
 779         .id = 1,
 780         .num_resources = ARRAY_SIZE(bfin_uart1_resources),
 781         .resource = bfin_uart1_resources,
 782         .dev = {
 783                 .platform_data = &bfin_uart1_peripherals, /* Passed to driver */
 784         },
 785 };
 786 #endif
 787 #endif
 788
 789 #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
 790 #ifdef CONFIG_BFIN_SIR0
 791 static struct resource bfin_sir0_resources[] = {
 792         {
 793                 .start = 0xFFC00400,
 794                 .end = 0xFFC004FF,
 795                 .flags = IORESOURCE_MEM,
 796         },
 797         {
 798                 .start = IRQ_UART0_RX,
 799                 .end = IRQ_UART0_RX+1,
 800                 .flags = IORESOURCE_IRQ,
 801         },
 802         {
 803                 .start = CH_UART0_RX,
 804                 .end = CH_UART0_RX+1,
 805                 .flags = IORESOURCE_DMA,
 806         },
 807 };
 808
 809 static struct platform_device bfin_sir0_device = {
 810         .name = "bfin_sir",
 811         .id = 0,
 812         .num_resources = ARRAY_SIZE(bfin_sir0_resources),
 813         .resource = bfin_sir0_resources,
 814 };
 815 #endif
 816 #ifdef CONFIG_BFIN_SIR1
 817 static struct resource bfin_sir1_resources[] = {
 818         {
 819                 .start = 0xFFC02000,
 820                 .end = 0xFFC020FF,
 821                 .flags = IORESOURCE_MEM,
 822         },
 823         {
 824                 .start = IRQ_UART1_RX,
 825                 .end = IRQ_UART1_RX+1,
 826                 .flags = IORESOURCE_IRQ,
 827         },
 828         {
 829                 .start = CH_UART1_RX,
 830                 .end = CH_UART1_RX+1,
 831                 .flags = IORESOURCE_DMA,
 832         },
 833 };
 834
 835 static struct platform_device bfin_sir1_device = {
 836         .name = "bfin_sir",
 837         .id = 1,
 838         .num_resources = ARRAY_SIZE(bfin_sir1_resources),
 839         .resource = bfin_sir1_resources,
 840 };
 841 #endif
 842 #endif
 843
 844 #if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
 845 static struct resource bfin_twi0_resource[] = {
 846         [0] = {
 847                 .start = TWI0_REGBASE,
 848                 .end   = TWI0_REGBASE,
 849                 .flags = IORESOURCE_MEM,
 850         },
 851         [1] = {
 852                 .start = IRQ_TWI,
 853                 .end   = IRQ_TWI,
 854                 .flags = IORESOURCE_IRQ,
 855         },
 856 };
 857
 858 static struct platform_device i2c_bfin_twi_device = {
 859         .name = "i2c-bfin-twi",
 860         .id = 0,
 861         .num_resources = ARRAY_SIZE(bfin_twi0_resource),
 862         .resource = bfin_twi0_resource,
 863 };
 864 #endif
 865
 866 #if defined(CONFIG_PMIC_ADP5520) || defined(CONFIG_PMIC_ADP5520_MODULE)
 867 #include <linux/mfd/adp5520.h>
 868
 869         /*
 870          *  ADP5520/5501 LEDs Data
 871          */
 872
 873 static struct led_info adp5520_leds[] = {
 874         {
 875                 .name = "adp5520-led1",
 876                 .default_trigger = "none",
 877                 .flags = FLAG_ID_ADP5520_LED1_ADP5501_LED0 | ADP5520_LED_OFFT_600ms,
 878         },
 879 };
 880
 881 static struct adp5520_leds_platform_data adp5520_leds_data = {
 882         .num_leds = ARRAY_SIZE(adp5520_leds),
 883         .leds = adp5520_leds,
 884         .fade_in = ADP5520_FADE_T_600ms,
 885         .fade_out = ADP5520_FADE_T_600ms,
 886         .led_on_time = ADP5520_LED_ONT_600ms,
 887 };
 888
 889         /*
 890          *  ADP5520 Keypad Data
 891          */
 892
 893 static const unsigned short adp5520_keymap[ADP5520_KEYMAPSIZE] = {
 894         [ADP5520_KEY(3, 3)]     = KEY_1,
 895         [ADP5520_KEY(2, 3)]     = KEY_2,
 896         [ADP5520_KEY(1, 3)]     = KEY_3,
 897         [ADP5520_KEY(0, 3)]     = KEY_UP,
 898         [ADP5520_KEY(3, 2)]     = KEY_4,
 899         [ADP5520_KEY(2, 2)]     = KEY_5,
 900         [ADP5520_KEY(1, 2)]     = KEY_6,
 901         [ADP5520_KEY(0, 2)]     = KEY_DOWN,
 902         [ADP5520_KEY(3, 1)]     = KEY_7,
 903         [ADP5520_KEY(2, 1)]     = KEY_8,
 904         [ADP5520_KEY(1, 1)]     = KEY_9,
 905         [ADP5520_KEY(0, 1)]     = KEY_DOT,
 906         [ADP5520_KEY(3, 0)]     = KEY_BACKSPACE,
 907         [ADP5520_KEY(2, 0)]     = KEY_0,
 908         [ADP5520_KEY(1, 0)]     = KEY_HELP,
 909         [ADP5520_KEY(0, 0)]     = KEY_ENTER,
 910 };
 911
 912 static struct adp5520_keys_platform_data adp5520_keys_data = {
 913         .rows_en_mask   = ADP5520_ROW_R3 | ADP5520_ROW_R2 | ADP5520_ROW_R1 | ADP5520_ROW_R0,
 914         .cols_en_mask   = ADP5520_COL_C3 | ADP5520_COL_C2 | ADP5520_COL_C1 | ADP5520_COL_C0,
 915         .keymap         = adp5520_keymap,
 916         .keymapsize     = ARRAY_SIZE(adp5520_keymap),
 917         .repeat         = 0,
 918 };
 919
 920         /*
 921          *  ADP5520/5501 Multifunction Device Init Data
 922          */
 923
 924 static struct adp5520_platform_data adp5520_pdev_data = {
 925         .leds = &adp5520_leds_data,
 926         .keys = &adp5520_keys_data,
 927 };
 928
 929 #endif
 930
 931 static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
 932 #if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE)
 933         {
 934                 I2C_BOARD_INFO("pcf8574_lcd", 0x22),
 935         },
 936 #endif
 937 #if defined(CONFIG_INPUT_PCF8574) || defined(CONFIG_INPUT_PCF8574_MODULE)
 938         {
 939                 I2C_BOARD_INFO("pcf8574_keypad", 0x27),
 940                 .irq = IRQ_PF8,
 941         },
 942 #endif
 943 #if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE)
 944         {
 945                 I2C_BOARD_INFO("bfin-adv7393", 0x2B),
 946         },
 947 #endif
 948 #if defined(CONFIG_TOUCHSCREEN_AD7879_I2C) || defined(CONFIG_TOUCHSCREEN_AD7879_I2C_MODULE)
 949         {
 950                 I2C_BOARD_INFO("ad7879", 0x2C),
 951                 .irq = IRQ_PF8,
 952                 .platform_data = (void *)&bfin_ad7879_ts_info,
 953         },
 954 #endif
 955 #if defined(CONFIG_PMIC_ADP5520) || defined(CONFIG_PMIC_ADP5520_MODULE)
 956         {
 957                 I2C_BOARD_INFO("pmic-adp5520", 0x32),
 958                 .irq = IRQ_PF9,
 959                 .platform_data = (void *)&adp5520_pdev_data,
 960         },
 961 #endif
 962 #if defined(CONFIG_SND_SOC_SSM2602) || defined(CONFIG_SND_SOC_SSM2602_MODULE)
 963         {
 964                 I2C_BOARD_INFO("ssm2602", 0x1b),
 965         },
 966 #endif
 967 #if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE)
 968         {
 969                 I2C_BOARD_INFO("ad5252", 0x2f),
 970         },
 971 #endif
 972 #if defined(CONFIG_SND_SOC_ADAU1373) || defined(CONFIG_SND_SOC_ADAU1373_MODULE)
 973         {
 974                 I2C_BOARD_INFO("adau1373", 0x1A),
 975         },
 976 #endif
 977 };
 978
 979 #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
 980 #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
 981 static struct resource bfin_sport0_uart_resources[] = {
 982         {
 983                 .start = SPORT0_TCR1,
 984                 .end = SPORT0_MRCS3+4,
 985                 .flags = IORESOURCE_MEM,
 986         },
 987         {
 988                 .start = IRQ_SPORT0_RX,
 989                 .end = IRQ_SPORT0_RX+1,
 990                 .flags = IORESOURCE_IRQ,
 991         },
 992         {
 993                 .start = IRQ_SPORT0_ERROR,
 994                 .end = IRQ_SPORT0_ERROR,
 995                 .flags = IORESOURCE_IRQ,
 996         },
 997 };
 998
 999 static unsigned short bfin_sport0_peripherals[] = {
1000         P_SPORT0_TFS, P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS,
1001         P_SPORT0_DRPRI, P_SPORT0_RSCLK, 0
1002 };
1003
1004 static struct platform_device bfin_sport0_uart_device = {
1005         .name = "bfin-sport-uart",
1006         .id = 0,
1007         .num_resources = ARRAY_SIZE(bfin_sport0_uart_resources),
1008         .resource = bfin_sport0_uart_resources,
1009         .dev = {
1010                 .platform_data = &bfin_sport0_peripherals, /* Passed to driver */
1011         },
1012 };
1013 #endif
1014 #ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
1015 static struct resource bfin_sport1_uart_resources[] = {
1016         {
1017                 .start = SPORT1_TCR1,
1018                 .end = SPORT1_MRCS3+4,
1019                 .flags = IORESOURCE_MEM,
1020         },
1021         {
1022                 .start = IRQ_SPORT1_RX,
1023                 .end = IRQ_SPORT1_RX+1,
1024                 .flags = IORESOURCE_IRQ,
1025         },
1026         {
1027                 .start = IRQ_SPORT1_ERROR,
1028                 .end = IRQ_SPORT1_ERROR,
1029                 .flags = IORESOURCE_IRQ,
1030         },
1031 };
1032
1033 static unsigned short bfin_sport1_peripherals[] = {
1034         P_SPORT1_TFS, P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_RFS,
1035         P_SPORT1_DRPRI, P_SPORT1_RSCLK, 0
1036 };
1037
1038 static struct platform_device bfin_sport1_uart_device = {
1039         .name = "bfin-sport-uart",
1040         .id = 1,
1041         .num_resources = ARRAY_SIZE(bfin_sport1_uart_resources),
1042         .resource = bfin_sport1_uart_resources,
1043         .dev = {
1044                 .platform_data = &bfin_sport1_peripherals, /* Passed to driver */
1045         },
1046 };
1047 #endif
1048 #endif
1049
1050 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
1051 #include <linux/gpio_keys.h>
1052
1053 static struct gpio_keys_button bfin_gpio_keys_table[] = {
1054         {BTN_0, GPIO_PG0, 1, "gpio-keys: BTN0"},
1055         {BTN_1, GPIO_PG13, 1, "gpio-keys: BTN1"},
1056 };
1057
1058 static struct gpio_keys_platform_data bfin_gpio_keys_data = {
1059         .buttons        = bfin_gpio_keys_table,
1060         .nbuttons       = ARRAY_SIZE(bfin_gpio_keys_table),
1061 };
1062
1063 static struct platform_device bfin_device_gpiokeys = {
1064         .name      = "gpio-keys",
1065         .dev = {
1066                 .platform_data = &bfin_gpio_keys_data,
1067         },
1068 };
1069 #endif
1070
1071 #if defined(CONFIG_INPUT_BFIN_ROTARY) || defined(CONFIG_INPUT_BFIN_ROTARY_MODULE)
1072 #include <asm/bfin_rotary.h>
1073
1074 static struct bfin_rotary_platform_data bfin_rotary_data = {
1075         /*.rotary_up_key     = KEY_UP,*/
1076         /*.rotary_down_key   = KEY_DOWN,*/
1077         .rotary_rel_code   = REL_WHEEL,
1078         .rotary_button_key = KEY_ENTER,
1079         .debounce          = 10,        /* 0..17 */
1080         .mode              = ROT_QUAD_ENC | ROT_DEBE,
1081 };
1082
1083 static struct resource bfin_rotary_resources[] = {
1084         {
1085                 .start = IRQ_CNT,
1086                 .end = IRQ_CNT,
1087                 .flags = IORESOURCE_IRQ,
1088         },
1089 };
1090
1091 static struct platform_device bfin_rotary_device = {
1092         .name           = "bfin-rotary",
1093         .id             = -1,
1094         .num_resources  = ARRAY_SIZE(bfin_rotary_resources),
1095         .resource       = bfin_rotary_resources,
1096         .dev            = {
1097                 .platform_data = &bfin_rotary_data,
1098         },
1099 };
1100 #endif
1101
1102 static const unsigned int cclk_vlev_datasheet[] =
1103 {
1104         VRPAIR(VLEV_100, 400000000),
1105         VRPAIR(VLEV_105, 426000000),
1106         VRPAIR(VLEV_110, 500000000),
1107         VRPAIR(VLEV_115, 533000000),
1108         VRPAIR(VLEV_120, 600000000),
1109 };
1110
1111 static struct bfin_dpmc_platform_data bfin_dmpc_vreg_data = {
1112         .tuple_tab = cclk_vlev_datasheet,
1113         .tabsize = ARRAY_SIZE(cclk_vlev_datasheet),
1114         .vr_settling_time = 25 /* us */,
1115 };
1116
1117 static struct platform_device bfin_dpmc = {
1118         .name = "bfin dpmc",
1119         .dev = {
1120                 .platform_data = &bfin_dmpc_vreg_data,
1121         },
1122 };
1123
1124 static struct platform_device *stamp_devices[] __initdata = {
1125
1126         &bfin_dpmc,
1127
1128 #if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE)
1129         &bf5xx_nand_device,
1130 #endif
1131
1132 #if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE)
1133         &bfin_pcmcia_cf_device,
1134 #endif
1135
1136 #if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
1137         &rtc_device,
1138 #endif
1139
1140 #if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE)
1141         &bfin_isp1760_device,
1142 #endif
1143
1144 #if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE)
1145         &musb_device,
1146 #endif
1147
1148 #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
1149         &smc91x_device,
1150 #endif
1151
1152 #if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
1153         &dm9000_device,
1154 #endif
1155
1156 #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
1157         &bfin_mii_bus,
1158         &bfin_mac_device,
1159 #endif
1160
1161 #if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
1162         &net2272_bfin_device,
1163 #endif
1164
1165 #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
1166         &bfin_spi0_device,
1167 #endif
1168
1169 #if defined(CONFIG_FB_BFIN_T350MCQB) || defined(CONFIG_FB_BFIN_T350MCQB_MODULE)
1170         &bf52x_t350mcqb_device,
1171 #endif
1172
1173 #if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE)
1174         &bfin_lq035q1_device,
1175 #endif
1176
1177 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
1178 #ifdef CONFIG_SERIAL_BFIN_UART0
1179         &bfin_uart0_device,
1180 #endif
1181 #ifdef CONFIG_SERIAL_BFIN_UART1
1182         &bfin_uart1_device,
1183 #endif
1184 #endif
1185
1186 #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
1187 #ifdef CONFIG_BFIN_SIR0
1188         &bfin_sir0_device,
1189 #endif
1190 #ifdef CONFIG_BFIN_SIR1
1191         &bfin_sir1_device,
1192 #endif
1193 #endif
1194
1195 #if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
1196         &i2c_bfin_twi_device,
1197 #endif
1198
1199 #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
1200 #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
1201         &bfin_sport0_uart_device,
1202 #endif
1203 #ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
1204         &bfin_sport1_uart_device,
1205 #endif
1206 #endif
1207
1208 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
1209         &bfin_device_gpiokeys,
1210 #endif
1211
1212 #if defined(CONFIG_INPUT_BFIN_ROTARY) || defined(CONFIG_INPUT_BFIN_ROTARY_MODULE)
1213         &bfin_rotary_device,
1214 #endif
1215
1216 #if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
1217         &ezkit_flash_device,
1218 #endif
1219
1220 #if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE) || \
1221         defined(CONFIG_SND_BF5XX_TDM) || defined(CONFIG_SND_BF5XX_TDM_MODULE)
1222         &bfin_pcm,
1223 #endif
1224
1225 #if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE)
1226         &bfin_i2s,
1227 #endif
1228
1229 #if defined(CONFIG_SND_BF5XX_TDM) || defined(CONFIG_SND_BF5XX_TDM_MODULE)
1230         &bfin_tdm,
1231 #endif
1232 };
1233
1234 static int __init ezkit_init(void)
1235 {
1236         printk(KERN_INFO "%s(): registering device resources\n", __func__);
1237         i2c_register_board_info(0, bfin_i2c_board_info,
1238                                 ARRAY_SIZE(bfin_i2c_board_info));
1239         platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices));
1240         spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
1241         return 0;
1242 }
1243
1244 arch_initcall(ezkit_init);
1245
1246 static struct platform_device *ezkit_early_devices[] __initdata = {
1247 #if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK)
1248 #ifdef CONFIG_SERIAL_BFIN_UART0
1249         &bfin_uart0_device,
1250 #endif
1251 #ifdef CONFIG_SERIAL_BFIN_UART1
1252         &bfin_uart1_device,
1253 #endif
1254 #endif
1255
1256 #if defined(CONFIG_SERIAL_BFIN_SPORT_CONSOLE)
1257 #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
1258         &bfin_sport0_uart_device,
1259 #endif
1260 #ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
1261         &bfin_sport1_uart_device,
1262 #endif
1263 #endif
1264 };
1265
1266 void __init native_machine_early_platform_add_devices(void)
1267 {
1268         printk(KERN_INFO "register early platform devices\n");
1269         early_platform_add_devices(ezkit_early_devices,
1270                 ARRAY_SIZE(ezkit_early_devices));
1271 }
1272
1273 void native_machine_restart(char *cmd)
1274 {
1275         /* workaround reboot hang when booting from SPI */
1276         if ((bfin_read_SYSCR() & 0x7) == 0x3)
1277                 bfin_reset_boot_spi_cs(P_DEFAULT_BOOT_SPI_CS);
1278 }
1279
1280 void bfin_get_ether_addr(char *addr)
1281 {
1282         /* the MAC is stored in OTP memory page 0xDF */
1283         u32 ret;
1284         u64 otp_mac;
1285         u32 (*otp_read)(u32 page, u32 flags, u64 *page_content) = (void *)0xEF00001A;
1286
1287         ret = otp_read(0xDF, 0x00, &otp_mac);
1288         if (!(ret & 0x1)) {
1289                 char *otp_mac_p = (char *)&otp_mac;
1290                 for (ret = 0; ret < 6; ++ret)
1291                         addr[ret] = otp_mac_p[5 - ret];
1292         }
1293 }
1294 EXPORT_SYMBOL(bfin_get_ether_addr);