mfd: Add STMPE I/O Expander support
[linux-2.6/libata-dev.git] / drivers / mfd / stmpe.h
blob991f0ecbeb3410ab3f0cefacb0fe87c4813db79b
1 /*
2 * Copyright (C) ST-Ericsson SA 2010
4 * License Terms: GNU General Public License, version 2
5 * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson
6 */
8 #ifndef __STMPE_H
9 #define __STMPE_H
11 #ifdef STMPE_DUMP_BYTES
12 static inline void stmpe_dump_bytes(const char *str, const void *buf,
13 size_t len)
15 print_hex_dump_bytes(str, DUMP_PREFIX_OFFSET, buf, len);
17 #else
18 static inline void stmpe_dump_bytes(const char *str, const void *buf,
19 size_t len)
22 #endif
24 /**
25 * struct stmpe_variant_block - information about block
26 * @cell: base mfd cell
27 * @irq: interrupt number to be added to each IORESOURCE_IRQ
28 * in the cell
29 * @block: block id; used for identification with platform data and for
30 * enable and altfunc callbacks
32 struct stmpe_variant_block {
33 struct mfd_cell *cell;
34 int irq;
35 enum stmpe_block block;
38 /**
39 * struct stmpe_variant_info - variant-specific information
40 * @name: part name
41 * @id_val: content of CHIPID register
42 * @id_mask: bits valid in CHIPID register for comparison with id_val
43 * @num_gpios: number of GPIOS
44 * @af_bits: number of bits used to specify the alternate function
45 * @blocks: list of blocks present on this device
46 * @num_blocks: number of blocks present on this device
47 * @num_irqs: number of internal IRQs available on this device
48 * @enable: callback to enable the specified blocks.
49 * Called with the I/O lock held.
50 * @get_altfunc: callback to get the alternate function number for the
51 * specific block
53 struct stmpe_variant_info {
54 const char *name;
55 u16 id_val;
56 u16 id_mask;
57 int num_gpios;
58 int af_bits;
59 const u8 *regs;
60 struct stmpe_variant_block *blocks;
61 int num_blocks;
62 int num_irqs;
63 int (*enable)(struct stmpe *stmpe, unsigned int blocks, bool enable);
64 int (*get_altfunc)(struct stmpe *stmpe, enum stmpe_block block);
67 #define STMPE_ICR_LSB_HIGH (1 << 2)
68 #define STMPE_ICR_LSB_EDGE (1 << 1)
69 #define STMPE_ICR_LSB_GIM (1 << 0)
72 * STMPE811
75 #define STMPE811_IRQ_TOUCH_DET 0
76 #define STMPE811_IRQ_FIFO_TH 1
77 #define STMPE811_IRQ_FIFO_OFLOW 2
78 #define STMPE811_IRQ_FIFO_FULL 3
79 #define STMPE811_IRQ_FIFO_EMPTY 4
80 #define STMPE811_IRQ_TEMP_SENS 5
81 #define STMPE811_IRQ_ADC 6
82 #define STMPE811_IRQ_GPIOC 7
83 #define STMPE811_NR_INTERNAL_IRQS 8
85 #define STMPE811_REG_CHIP_ID 0x00
86 #define STMPE811_REG_SYS_CTRL2 0x04
87 #define STMPE811_REG_INT_CTRL 0x09
88 #define STMPE811_REG_INT_EN 0x0A
89 #define STMPE811_REG_INT_STA 0x0B
90 #define STMPE811_REG_GPIO_INT_EN 0x0C
91 #define STMPE811_REG_GPIO_INT_STA 0x0D
92 #define STMPE811_REG_GPIO_SET_PIN 0x10
93 #define STMPE811_REG_GPIO_CLR_PIN 0x11
94 #define STMPE811_REG_GPIO_MP_STA 0x12
95 #define STMPE811_REG_GPIO_DIR 0x13
96 #define STMPE811_REG_GPIO_ED 0x14
97 #define STMPE811_REG_GPIO_RE 0x15
98 #define STMPE811_REG_GPIO_FE 0x16
99 #define STMPE811_REG_GPIO_AF 0x17
101 #define STMPE811_SYS_CTRL2_ADC_OFF (1 << 0)
102 #define STMPE811_SYS_CTRL2_TSC_OFF (1 << 1)
103 #define STMPE811_SYS_CTRL2_GPIO_OFF (1 << 2)
104 #define STMPE811_SYS_CTRL2_TS_OFF (1 << 3)
107 * STMPE1601
110 #define STMPE1601_IRQ_GPIOC 8
111 #define STMPE1601_IRQ_PWM3 7
112 #define STMPE1601_IRQ_PWM2 6
113 #define STMPE1601_IRQ_PWM1 5
114 #define STMPE1601_IRQ_PWM0 4
115 #define STMPE1601_IRQ_KEYPAD_OVER 2
116 #define STMPE1601_IRQ_KEYPAD 1
117 #define STMPE1601_IRQ_WAKEUP 0
118 #define STMPE1601_NR_INTERNAL_IRQS 9
120 #define STMPE1601_REG_SYS_CTRL 0x02
121 #define STMPE1601_REG_ICR_LSB 0x11
122 #define STMPE1601_REG_IER_LSB 0x13
123 #define STMPE1601_REG_ISR_MSB 0x14
124 #define STMPE1601_REG_CHIP_ID 0x80
125 #define STMPE1601_REG_INT_EN_GPIO_MASK_LSB 0x17
126 #define STMPE1601_REG_INT_STA_GPIO_MSB 0x18
127 #define STMPE1601_REG_GPIO_MP_LSB 0x87
128 #define STMPE1601_REG_GPIO_SET_LSB 0x83
129 #define STMPE1601_REG_GPIO_CLR_LSB 0x85
130 #define STMPE1601_REG_GPIO_SET_DIR_LSB 0x89
131 #define STMPE1601_REG_GPIO_ED_MSB 0x8A
132 #define STMPE1601_REG_GPIO_RE_LSB 0x8D
133 #define STMPE1601_REG_GPIO_FE_LSB 0x8F
134 #define STMPE1601_REG_GPIO_AF_U_MSB 0x92
136 #define STMPE1601_SYS_CTRL_ENABLE_GPIO (1 << 3)
137 #define STMPE1601_SYS_CTRL_ENABLE_KPC (1 << 1)
138 #define STMPE1601_SYSCON_ENABLE_SPWM (1 << 0)
141 * STMPE24xx
144 #define STMPE24XX_IRQ_GPIOC 8
145 #define STMPE24XX_IRQ_PWM2 7
146 #define STMPE24XX_IRQ_PWM1 6
147 #define STMPE24XX_IRQ_PWM0 5
148 #define STMPE24XX_IRQ_ROT_OVER 4
149 #define STMPE24XX_IRQ_ROT 3
150 #define STMPE24XX_IRQ_KEYPAD_OVER 2
151 #define STMPE24XX_IRQ_KEYPAD 1
152 #define STMPE24XX_IRQ_WAKEUP 0
153 #define STMPE24XX_NR_INTERNAL_IRQS 9
155 #define STMPE24XX_REG_SYS_CTRL 0x02
156 #define STMPE24XX_REG_ICR_LSB 0x11
157 #define STMPE24XX_REG_IER_LSB 0x13
158 #define STMPE24XX_REG_ISR_MSB 0x14
159 #define STMPE24XX_REG_CHIP_ID 0x80
160 #define STMPE24XX_REG_IEGPIOR_LSB 0x18
161 #define STMPE24XX_REG_ISGPIOR_MSB 0x19
162 #define STMPE24XX_REG_GPMR_LSB 0xA5
163 #define STMPE24XX_REG_GPSR_LSB 0x85
164 #define STMPE24XX_REG_GPCR_LSB 0x88
165 #define STMPE24XX_REG_GPDR_LSB 0x8B
166 #define STMPE24XX_REG_GPEDR_MSB 0x8C
167 #define STMPE24XX_REG_GPRER_LSB 0x91
168 #define STMPE24XX_REG_GPFER_LSB 0x94
169 #define STMPE24XX_REG_GPAFR_U_MSB 0x9B
171 #define STMPE24XX_SYS_CTRL_ENABLE_GPIO (1 << 3)
172 #define STMPE24XX_SYSCON_ENABLE_PWM (1 << 2)
173 #define STMPE24XX_SYS_CTRL_ENABLE_KPC (1 << 1)
174 #define STMPE24XX_SYSCON_ENABLE_ROT (1 << 0)
176 #endif