?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
[NETNS]: Show routing information from correct namespace (fib_trie.c)
[linux-2.6/libata-dev.git] / drivers / char / moxa.c
blob2fc255a21486321acc7c70fb40c40e814bf10918
1 /*****************************************************************************/
2 /*
3 * moxa.c -- MOXA Intellio family multiport serial driver.
4 *
5 * Copyright (C) 1999-2000 Moxa Technologies (support@moxa.com.tw).
6 *
7 * This code is loosely based on the Linux serial driver, written by
8 * Linus Torvalds, Theodore T'so and others.
9 *
10 * This program is free software; you can redistribute it and/or modify
11 * it under the terms of the GNU General Public License as published by
12 * the Free Software Foundation; either version 2 of the License, or
13 * (at your option) any later version.
14 */
15
16 /*
17 * MOXA Intellio Series Driver
18 * for : LINUX
19 * date : 1999/1/7
20 * version : 5.1
21 */
22
23 #include <linux/module.h>
24 #include <linux/types.h>
25 #include <linux/mm.h>
26 #include <linux/ioport.h>
27 #include <linux/errno.h>
28 #include <linux/signal.h>
29 #include <linux/sched.h>
30 #include <linux/timer.h>
31 #include <linux/interrupt.h>
32 #include <linux/tty.h>
33 #include <linux/tty_flip.h>
34 #include <linux/major.h>
35 #include <linux/string.h>
36 #include <linux/fcntl.h>
37 #include <linux/ptrace.h>
38 #include <linux/serial.h>
39 #include <linux/tty_driver.h>
40 #include <linux/delay.h>
41 #include <linux/pci.h>
42 #include <linux/init.h>
43 #include <linux/bitops.h>
44 #include <linux/completion.h>
45
46 #include <asm/system.h>
47 #include <asm/io.h>
48 #include <asm/uaccess.h>
49
50 #define MOXA_VERSION "5.1k"
51
52 #define MOXAMAJOR 172
53 #define MOXACUMAJOR 173
54
55 #define MAX_BOARDS 4 /* Don't change this value */
56 #define MAX_PORTS_PER_BOARD 32 /* Don't change this value */
57 #define MAX_PORTS (MAX_BOARDS * MAX_PORTS_PER_BOARD)
58
59 /*
60 * Define the Moxa PCI vendor and device IDs.
61 */
62 #define MOXA_BUS_TYPE_ISA 0
63 #define MOXA_BUS_TYPE_PCI 1
64
65 enum {
66 MOXA_BOARD_C218_PCI = 1,
67 MOXA_BOARD_C218_ISA,
68 MOXA_BOARD_C320_PCI,
69 MOXA_BOARD_C320_ISA,
70 MOXA_BOARD_CP204J,
71 };
72
73 static char *moxa_brdname[] =
74 {
75 "C218 Turbo PCI series",
76 "C218 Turbo ISA series",
77 "C320 Turbo PCI series",
78 "C320 Turbo ISA series",
79 "CP-204J series",
80 };
81
82 #ifdef CONFIG_PCI
83 static struct pci_device_id moxa_pcibrds[] = {
84 { PCI_DEVICE(PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_C218),
85 .driver_data = MOXA_BOARD_C218_PCI },
86 { PCI_DEVICE(PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_C320),
87 .driver_data = MOXA_BOARD_C320_PCI },
88 { PCI_DEVICE(PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_CP204J),
89 .driver_data = MOXA_BOARD_CP204J },
90 { 0 }
91 };
92 MODULE_DEVICE_TABLE(pci, moxa_pcibrds);
93 #endif /* CONFIG_PCI */
94
95 struct moxa_isa_board_conf {
96 int boardType;
97 int numPorts;
98 unsigned long baseAddr;
99 };
100
101 static struct moxa_isa_board_conf moxa_isa_boards[] =
102 {
103 /* {MOXA_BOARD_C218_ISA,8,0xDC000}, */
104 };
105
106 static struct moxa_board_conf {
107 int boardType;
108 int numPorts;
109 unsigned long baseAddr;
110 int busType;
111
112 int loadstat;
113
114 void __iomem *basemem;
115 void __iomem *intNdx;
116 void __iomem *intPend;
117 void __iomem *intTable;
118 } moxa_boards[MAX_BOARDS];
119
120 struct mxser_mstatus {
121 tcflag_t cflag;
122 int cts;
123 int dsr;
124 int ri;
125 int dcd;
126 };
127
128 struct moxaq_str {
129 int inq;
130 int outq;
131 };
132
133 struct moxa_port {
134 int type;
135 int port;
136 int close_delay;
137 unsigned short closing_wait;
138 int count;
139 int blocked_open;
140 long event; /* long req'd for set_bit --RR */
141 int asyncflags;
142 unsigned long statusflags;
143 struct tty_struct *tty;
144 int cflag;
145 wait_queue_head_t open_wait;
146 struct completion close_wait;
147
148 struct timer_list emptyTimer;
149
150 char chkPort;
151 char lineCtrl;
152 void __iomem *tableAddr;
153 long curBaud;
154 char DCDState;
155 char lowChkFlag;
156
157 ushort breakCnt;
158 };
159
160 /* statusflags */
161 #define TXSTOPPED 0x1
162 #define LOWWAIT 0x2
163 #define EMPTYWAIT 0x4
164 #define THROTTLE 0x8
165
166 #define SERIAL_DO_RESTART
167
168 #define WAKEUP_CHARS 256
169
170 static int ttymajor = MOXAMAJOR;
171 /* Variables for insmod */
172 #ifdef MODULE
173 static int baseaddr[4];
174 static int type[4];
175 static int numports[4];
176 #endif
177
178 MODULE_AUTHOR("William Chen");
179 MODULE_DESCRIPTION("MOXA Intellio Family Multiport Board Device Driver");
180 MODULE_LICENSE("GPL");
181 #ifdef MODULE
182 module_param_array(type, int, NULL, 0);
183 module_param_array(baseaddr, int, NULL, 0);
184 module_param_array(numports, int, NULL, 0);
185 #endif
186 module_param(ttymajor, int, 0);
187
188 /*
189 * static functions:
190 */
191 static int moxa_open(struct tty_struct *, struct file *);
192 static void moxa_close(struct tty_struct *, struct file *);
193 static int moxa_write(struct tty_struct *, const unsigned char *, int);
194 static int moxa_write_room(struct tty_struct *);
195 static void moxa_flush_buffer(struct tty_struct *);
196 static int moxa_chars_in_buffer(struct tty_struct *);
197 static void moxa_flush_chars(struct tty_struct *);
198 static void moxa_put_char(struct tty_struct *, unsigned char);
199 static int moxa_ioctl(struct tty_struct *, struct file *, unsigned int, unsigned long);
200 static void moxa_throttle(struct tty_struct *);
201 static void moxa_unthrottle(struct tty_struct *);
202 static void moxa_set_termios(struct tty_struct *, struct ktermios *);
203 static void moxa_stop(struct tty_struct *);
204 static void moxa_start(struct tty_struct *);
205 static void moxa_hangup(struct tty_struct *);
206 static int moxa_tiocmget(struct tty_struct *tty, struct file *file);
207 static int moxa_tiocmset(struct tty_struct *tty, struct file *file,
208 unsigned int set, unsigned int clear);
209 static void moxa_poll(unsigned long);
210 static void moxa_set_tty_param(struct tty_struct *);
211 static int moxa_block_till_ready(struct tty_struct *, struct file *,
212 struct moxa_port *);
213 static void moxa_setup_empty_event(struct tty_struct *);
214 static void moxa_check_xmit_empty(unsigned long);
215 static void moxa_shut_down(struct moxa_port *);
216 static void moxa_receive_data(struct moxa_port *);
217 /*
218 * moxa board interface functions:
219 */
220 static void MoxaDriverInit(void);
221 static int MoxaDriverIoctl(unsigned int, unsigned long, int);
222 static int MoxaDriverPoll(void);
223 static int MoxaPortsOfCard(int);
224 static int MoxaPortIsValid(int);
225 static void MoxaPortEnable(int);
226 static void MoxaPortDisable(int);
227 static long MoxaPortGetMaxBaud(int);
228 static long MoxaPortSetBaud(int, long);
229 static int MoxaPortSetTermio(int, struct ktermios *, speed_t);
230 static int MoxaPortGetLineOut(int, int *, int *);
231 static void MoxaPortLineCtrl(int, int, int);
232 static void MoxaPortFlowCtrl(int, int, int, int, int, int);
233 static int MoxaPortLineStatus(int);
234 static int MoxaPortDCDChange(int);
235 static int MoxaPortDCDON(int);
236 static void MoxaPortFlushData(int, int);
237 static int MoxaPortWriteData(int, unsigned char *, int);
238 static int MoxaPortReadData(int, struct tty_struct *tty);
239 static int MoxaPortTxQueue(int);
240 static int MoxaPortRxQueue(int);
241 static int MoxaPortTxFree(int);
242 static void MoxaPortTxDisable(int);
243 static void MoxaPortTxEnable(int);
244 static int MoxaPortResetBrkCnt(int);
245 static void MoxaPortSendBreak(int, int);
246 static int moxa_get_serial_info(struct moxa_port *, struct serial_struct __user *);
247 static int moxa_set_serial_info(struct moxa_port *, struct serial_struct __user *);
248 static void MoxaSetFifo(int port, int enable);
249
250 static const struct tty_operations moxa_ops = {
251 .open = moxa_open,
252 .close = moxa_close,
253 .write = moxa_write,
254 .write_room = moxa_write_room,
255 .flush_buffer = moxa_flush_buffer,
256 .chars_in_buffer = moxa_chars_in_buffer,
257 .flush_chars = moxa_flush_chars,
258 .put_char = moxa_put_char,
259 .ioctl = moxa_ioctl,
260 .throttle = moxa_throttle,
261 .unthrottle = moxa_unthrottle,
262 .set_termios = moxa_set_termios,
263 .stop = moxa_stop,
264 .start = moxa_start,
265 .hangup = moxa_hangup,
266 .tiocmget = moxa_tiocmget,
267 .tiocmset = moxa_tiocmset,
268 };
269
270 static struct tty_driver *moxaDriver;
271 static struct moxa_port moxa_ports[MAX_PORTS];
272 static DEFINE_TIMER(moxaTimer, moxa_poll, 0, 0);
273 static DEFINE_SPINLOCK(moxa_lock);
274
275 #ifdef CONFIG_PCI
276 static int __devinit moxa_pci_probe(struct pci_dev *pdev,
277 const struct pci_device_id *ent)
278 {
279 struct moxa_board_conf *board;
280 unsigned int i;
281 int board_type = ent->driver_data;
282 int retval;
283
284 retval = pci_enable_device(pdev);
285 if (retval) {
286 dev_err(&pdev->dev, "can't enable pci device\n");
287 goto err;
288 }
289
290 for (i = 0; i < MAX_BOARDS; i++)
291 if (moxa_boards[i].basemem == NULL)
292 break;
293
294 retval = -ENODEV;
295 if (i >= MAX_BOARDS) {
296 dev_warn(&pdev->dev, "more than %u MOXA Intellio family boards "
297 "found. Board is ignored.\n", MAX_BOARDS);
298 goto err;
299 }
300
301 board = &moxa_boards[i];
302 board->basemem = pci_iomap(pdev, 2, 0x4000);
303 if (board->basemem == NULL) {
304 dev_err(&pdev->dev, "can't remap io space 2\n");
305 goto err;
306 }
307
308 board->boardType = board_type;
309 switch (board_type) {
310 case MOXA_BOARD_C218_ISA:
311 case MOXA_BOARD_C218_PCI:
312 board->numPorts = 8;
313 break;
314
315 case MOXA_BOARD_CP204J:
316 board->numPorts = 4;
317 break;
318 default:
319 board->numPorts = 0;
320 break;
321 }
322 board->busType = MOXA_BUS_TYPE_PCI;
323
324 pci_set_drvdata(pdev, board);
325
326 return (0);
327 err:
328 return retval;
329 }
330
331 static void __devexit moxa_pci_remove(struct pci_dev *pdev)
332 {
333 struct moxa_board_conf *brd = pci_get_drvdata(pdev);
334
335 pci_iounmap(pdev, brd->basemem);
336 brd->basemem = NULL;
337 }
338
339 static struct pci_driver moxa_pci_driver = {
340 .name = "moxa",
341 .id_table = moxa_pcibrds,
342 .probe = moxa_pci_probe,
343 .remove = __devexit_p(moxa_pci_remove)
344 };
345 #endif /* CONFIG_PCI */
346
347 static int __init moxa_init(void)
348 {
349 int i, numBoards, retval = 0;
350 struct moxa_port *ch;
351
352 printk(KERN_INFO "MOXA Intellio family driver version %s\n",
353 MOXA_VERSION);
354 moxaDriver = alloc_tty_driver(MAX_PORTS + 1);
355 if (!moxaDriver)
356 return -ENOMEM;
357
358 moxaDriver->owner = THIS_MODULE;
359 moxaDriver->name = "ttyMX";
360 moxaDriver->major = ttymajor;
361 moxaDriver->minor_start = 0;
362 moxaDriver->type = TTY_DRIVER_TYPE_SERIAL;
363 moxaDriver->subtype = SERIAL_TYPE_NORMAL;
364 moxaDriver->init_termios = tty_std_termios;
365 moxaDriver->init_termios.c_cflag = B9600 | CS8 | CREAD | CLOCAL | HUPCL;
366 moxaDriver->init_termios.c_ispeed = 9600;
367 moxaDriver->init_termios.c_ospeed = 9600;
368 moxaDriver->flags = TTY_DRIVER_REAL_RAW;
369 tty_set_operations(moxaDriver, &moxa_ops);
370
371 for (i = 0, ch = moxa_ports; i < MAX_PORTS; i++, ch++) {
372 ch->type = PORT_16550A;
373 ch->port = i;
374 ch->close_delay = 5 * HZ / 10;
375 ch->closing_wait = 30 * HZ;
376 ch->cflag = B9600 | CS8 | CREAD | CLOCAL | HUPCL;
377 init_waitqueue_head(&ch->open_wait);
378 init_completion(&ch->close_wait);
379
380 setup_timer(&ch->emptyTimer, moxa_check_xmit_empty,
381 (unsigned long)ch);
382 }
383
384 pr_debug("Moxa tty devices major number = %d\n", ttymajor);
385
386 if (tty_register_driver(moxaDriver)) {
387 printk(KERN_ERR "Couldn't install MOXA Smartio family driver !\n");
388 put_tty_driver(moxaDriver);
389 return -1;
390 }
391
392 mod_timer(&moxaTimer, jiffies + HZ / 50);
393
394 /* Find the boards defined in source code */
395 numBoards = 0;
396 for (i = 0; i < MAX_BOARDS; i++) {
397 if ((moxa_isa_boards[i].boardType == MOXA_BOARD_C218_ISA) ||
398 (moxa_isa_boards[i].boardType == MOXA_BOARD_C320_ISA)) {
399 moxa_boards[numBoards].boardType = moxa_isa_boards[i].boardType;
400 if (moxa_isa_boards[i].boardType == MOXA_BOARD_C218_ISA)
401 moxa_boards[numBoards].numPorts = 8;
402 else
403 moxa_boards[numBoards].numPorts = moxa_isa_boards[i].numPorts;
404 moxa_boards[numBoards].busType = MOXA_BUS_TYPE_ISA;
405 moxa_boards[numBoards].baseAddr = moxa_isa_boards[i].baseAddr;
406 pr_debug("Moxa board %2d: %s board(baseAddr=%lx)\n",
407 numBoards + 1,
408 moxa_brdname[moxa_boards[numBoards].boardType-1],
409 moxa_boards[numBoards].baseAddr);
410 numBoards++;
411 }
412 }
413 /* Find the boards defined form module args. */
414 #ifdef MODULE
415 for (i = 0; i < MAX_BOARDS; i++) {
416 if ((type[i] == MOXA_BOARD_C218_ISA) ||
417 (type[i] == MOXA_BOARD_C320_ISA)) {
418 pr_debug("Moxa board %2d: %s board(baseAddr=%lx)\n",
419 numBoards + 1, moxa_brdname[type[i] - 1],
420 (unsigned long)baseaddr[i]);
421 if (numBoards >= MAX_BOARDS) {
422 printk(KERN_WARNING "More than %d MOXA "
423 "Intellio family boards found. Board "
424 "is ignored.\n", MAX_BOARDS);
425 continue;
426 }
427 moxa_boards[numBoards].boardType = type[i];
428 if (moxa_isa_boards[i].boardType == MOXA_BOARD_C218_ISA)
429 moxa_boards[numBoards].numPorts = 8;
430 else
431 moxa_boards[numBoards].numPorts = numports[i];
432 moxa_boards[numBoards].busType = MOXA_BUS_TYPE_ISA;
433 moxa_boards[numBoards].baseAddr = baseaddr[i];
434 numBoards++;
435 }
436 }
437 #endif
438
439 #ifdef CONFIG_PCI
440 retval = pci_register_driver(&moxa_pci_driver);
441 if (retval) {
442 printk(KERN_ERR "Can't register moxa pci driver!\n");
443 if (numBoards)
444 retval = 0;
445 }
446 #endif
447
448 for (i = 0; i < numBoards; i++) {
449 moxa_boards[i].basemem = ioremap(moxa_boards[i].baseAddr,
450 0x4000);
451 }
452
453 return retval;
454 }
455
456 static void __exit moxa_exit(void)
457 {
458 int i;
459
460 del_timer_sync(&moxaTimer);
461
462 for (i = 0; i < MAX_PORTS; i++)
463 del_timer_sync(&moxa_ports[i].emptyTimer);
464
465 if (tty_unregister_driver(moxaDriver))
466 printk(KERN_ERR "Couldn't unregister MOXA Intellio family "
467 "serial driver\n");
468 put_tty_driver(moxaDriver);
469
470 #ifdef CONFIG_PCI
471 pci_unregister_driver(&moxa_pci_driver);
472 #endif
473
474 for (i = 0; i < MAX_BOARDS; i++)
475 if (moxa_boards[i].basemem)
476 iounmap(moxa_boards[i].basemem);
477 }
478
479 module_init(moxa_init);
480 module_exit(moxa_exit);
481
482 static int moxa_open(struct tty_struct *tty, struct file *filp)
483 {
484 struct moxa_port *ch;
485 int port;
486 int retval;
487
488 port = tty->index;
489 if (port == MAX_PORTS) {
490 return (0);
491 }
492 if (!MoxaPortIsValid(port)) {
493 tty->driver_data = NULL;
494 return (-ENODEV);
495 }
496
497 ch = &moxa_ports[port];
498 ch->count++;
499 tty->driver_data = ch;
500 ch->tty = tty;
501 if (!(ch->asyncflags & ASYNC_INITIALIZED)) {
502 ch->statusflags = 0;
503 moxa_set_tty_param(tty);
504 MoxaPortLineCtrl(ch->port, 1, 1);
505 MoxaPortEnable(ch->port);
506 ch->asyncflags |= ASYNC_INITIALIZED;
507 }
508 retval = moxa_block_till_ready(tty, filp, ch);
509
510 moxa_unthrottle(tty);
511
512 if (ch->type == PORT_16550A) {
513 MoxaSetFifo(ch->port, 1);
514 } else {
515 MoxaSetFifo(ch->port, 0);
516 }
517
518 return (retval);
519 }
520
521 static void moxa_close(struct tty_struct *tty, struct file *filp)
522 {
523 struct moxa_port *ch;
524 int port;
525
526 port = tty->index;
527 if (port == MAX_PORTS) {
528 return;
529 }
530 if (!MoxaPortIsValid(port)) {
531 pr_debug("Invalid portno in moxa_close\n");
532 tty->driver_data = NULL;
533 return;
534 }
535 if (tty->driver_data == NULL) {
536 return;
537 }
538 if (tty_hung_up_p(filp)) {
539 return;
540 }
541 ch = (struct moxa_port *) tty->driver_data;
542
543 if ((tty->count == 1) && (ch->count != 1)) {
544 printk(KERN_WARNING "moxa_close: bad serial port count; "
545 "tty->count is 1, ch->count is %d\n", ch->count);
546 ch->count = 1;
547 }
548 if (--ch->count < 0) {
549 printk(KERN_WARNING "moxa_close: bad serial port count, "
550 "device=%s\n", tty->name);
551 ch->count = 0;
552 }
553 if (ch->count) {
554 return;
555 }
556 ch->asyncflags |= ASYNC_CLOSING;
557
558 ch->cflag = tty->termios->c_cflag;
559 if (ch->asyncflags & ASYNC_INITIALIZED) {
560 moxa_setup_empty_event(tty);
561 tty_wait_until_sent(tty, 30 * HZ); /* 30 seconds timeout */
562 del_timer_sync(&moxa_ports[ch->port].emptyTimer);
563 }
564 moxa_shut_down(ch);
565 MoxaPortFlushData(port, 2);
566
567 if (tty->driver->flush_buffer)
568 tty->driver->flush_buffer(tty);
569 tty_ldisc_flush(tty);
570
571 tty->closing = 0;
572 ch->event = 0;
573 ch->tty = NULL;
574 if (ch->blocked_open) {
575 if (ch->close_delay) {
576 msleep_interruptible(jiffies_to_msecs(ch->close_delay));
577 }
578 wake_up_interruptible(&ch->open_wait);
579 }
580 ch->asyncflags &= ~(ASYNC_NORMAL_ACTIVE | ASYNC_CLOSING);
581 complete_all(&ch->close_wait);
582 }
583
584 static int moxa_write(struct tty_struct *tty,
585 const unsigned char *buf, int count)
586 {
587 struct moxa_port *ch;
588 int len, port;
589 unsigned long flags;
590
591 ch = (struct moxa_port *) tty->driver_data;
592 if (ch == NULL)
593 return (0);
594 port = ch->port;
595
596 spin_lock_irqsave(&moxa_lock, flags);
597 len = MoxaPortWriteData(port, (unsigned char *) buf, count);
598 spin_unlock_irqrestore(&moxa_lock, flags);
599
600 /*********************************************
601 if ( !(ch->statusflags & LOWWAIT) &&
602 ((len != count) || (MoxaPortTxFree(port) <= 100)) )
603 ************************************************/
604 ch->statusflags |= LOWWAIT;
605 return (len);
606 }
607
608 static int moxa_write_room(struct tty_struct *tty)
609 {
610 struct moxa_port *ch;
611
612 if (tty->stopped)
613 return (0);
614 ch = (struct moxa_port *) tty->driver_data;
615 if (ch == NULL)
616 return (0);
617 return (MoxaPortTxFree(ch->port));
618 }
619
620 static void moxa_flush_buffer(struct tty_struct *tty)
621 {
622 struct moxa_port *ch = (struct moxa_port *) tty->driver_data;
623
624 if (ch == NULL)
625 return;
626 MoxaPortFlushData(ch->port, 1);
627 tty_wakeup(tty);
628 }
629
630 static int moxa_chars_in_buffer(struct tty_struct *tty)
631 {
632 int chars;
633 struct moxa_port *ch = (struct moxa_port *) tty->driver_data;
634
635 /*
636 * Sigh...I have to check if driver_data is NULL here, because
637 * if an open() fails, the TTY subsystem eventually calls
638 * tty_wait_until_sent(), which calls the driver's chars_in_buffer()
639 * routine. And since the open() failed, we return 0 here. TDJ
640 */
641 if (ch == NULL)
642 return (0);
643 chars = MoxaPortTxQueue(ch->port);
644 if (chars) {
645 /*
646 * Make it possible to wakeup anything waiting for output
647 * in tty_ioctl.c, etc.
648 */
649 if (!(ch->statusflags & EMPTYWAIT))
650 moxa_setup_empty_event(tty);
651 }
652 return (chars);
653 }
654
655 static void moxa_flush_chars(struct tty_struct *tty)
656 {
657 /*
658 * Don't think I need this, because this is called to empty the TX
659 * buffer for the 16450, 16550, etc.
660 */
661 }
662
663 static void moxa_put_char(struct tty_struct *tty, unsigned char c)
664 {
665 struct moxa_port *ch;
666 int port;
667 unsigned long flags;
668
669 ch = (struct moxa_port *) tty->driver_data;
670 if (ch == NULL)
671 return;
672 port = ch->port;
673 spin_lock_irqsave(&moxa_lock, flags);
674 MoxaPortWriteData(port, &c, 1);
675 spin_unlock_irqrestore(&moxa_lock, flags);
676 /************************************************
677 if ( !(ch->statusflags & LOWWAIT) && (MoxaPortTxFree(port) <= 100) )
678 *************************************************/
679 ch->statusflags |= LOWWAIT;
680 }
681
682 static int moxa_tiocmget(struct tty_struct *tty, struct file *file)
683 {
684 struct moxa_port *ch = (struct moxa_port *) tty->driver_data;
685 int port;
686 int flag = 0, dtr, rts;
687
688 port = tty->index;
689 if ((port != MAX_PORTS) && (!ch))
690 return (-EINVAL);
691
692 MoxaPortGetLineOut(ch->port, &dtr, &rts);
693 if (dtr)
694 flag |= TIOCM_DTR;
695 if (rts)
696 flag |= TIOCM_RTS;
697 dtr = MoxaPortLineStatus(ch->port);
698 if (dtr & 1)
699 flag |= TIOCM_CTS;
700 if (dtr & 2)
701 flag |= TIOCM_DSR;
702 if (dtr & 4)
703 flag |= TIOCM_CD;
704 return flag;
705 }
706
707 static int moxa_tiocmset(struct tty_struct *tty, struct file *file,
708 unsigned int set, unsigned int clear)
709 {
710 struct moxa_port *ch = (struct moxa_port *) tty->driver_data;
711 int port;
712 int dtr, rts;
713
714 port = tty->index;
715 if ((port != MAX_PORTS) && (!ch))
716 return (-EINVAL);
717
718 MoxaPortGetLineOut(ch->port, &dtr, &rts);
719 if (set & TIOCM_RTS)
720 rts = 1;
721 if (set & TIOCM_DTR)
722 dtr = 1;
723 if (clear & TIOCM_RTS)
724 rts = 0;
725 if (clear & TIOCM_DTR)
726 dtr = 0;
727 MoxaPortLineCtrl(ch->port, dtr, rts);
728 return 0;
729 }
730
731 static int moxa_ioctl(struct tty_struct *tty, struct file *file,
732 unsigned int cmd, unsigned long arg)
733 {
734 struct moxa_port *ch = (struct moxa_port *) tty->driver_data;
735 register int port;
736 void __user *argp = (void __user *)arg;
737 int retval;
738
739 port = tty->index;
740 if ((port != MAX_PORTS) && (!ch))
741 return (-EINVAL);
742
743 switch (cmd) {
744 case TCSBRK: /* SVID version: non-zero arg --> no break */
745 retval = tty_check_change(tty);
746 if (retval)
747 return (retval);
748 moxa_setup_empty_event(tty);
749 tty_wait_until_sent(tty, 0);
750 if (!arg)
751 MoxaPortSendBreak(ch->port, 0);
752 return (0);
753 case TCSBRKP: /* support for POSIX tcsendbreak() */
754 retval = tty_check_change(tty);
755 if (retval)
756 return (retval);
757 moxa_setup_empty_event(tty);
758 tty_wait_until_sent(tty, 0);
759 MoxaPortSendBreak(ch->port, arg);
760 return (0);
761 case TIOCGSOFTCAR:
762 return put_user(C_CLOCAL(tty) ? 1 : 0, (unsigned long __user *) argp);
763 case TIOCSSOFTCAR:
764 if(get_user(retval, (unsigned long __user *) argp))
765 return -EFAULT;
766 arg = retval;
767 tty->termios->c_cflag = ((tty->termios->c_cflag & ~CLOCAL) |
768 (arg ? CLOCAL : 0));
769 if (C_CLOCAL(tty))
770 ch->asyncflags &= ~ASYNC_CHECK_CD;
771 else
772 ch->asyncflags |= ASYNC_CHECK_CD;
773 return (0);
774 case TIOCGSERIAL:
775 return moxa_get_serial_info(ch, argp);
776
777 case TIOCSSERIAL:
778 return moxa_set_serial_info(ch, argp);
779 default:
780 retval = MoxaDriverIoctl(cmd, arg, port);
781 }
782 return (retval);
783 }
784
785 static void moxa_throttle(struct tty_struct *tty)
786 {
787 struct moxa_port *ch = (struct moxa_port *) tty->driver_data;
788
789 ch->statusflags |= THROTTLE;
790 }
791
792 static void moxa_unthrottle(struct tty_struct *tty)
793 {
794 struct moxa_port *ch = (struct moxa_port *) tty->driver_data;
795
796 ch->statusflags &= ~THROTTLE;
797 }
798
799 static void moxa_set_termios(struct tty_struct *tty,
800 struct ktermios *old_termios)
801 {
802 struct moxa_port *ch = (struct moxa_port *) tty->driver_data;
803
804 if (ch == NULL)
805 return;
806 moxa_set_tty_param(tty);
807 if (!(old_termios->c_cflag & CLOCAL) &&
808 (tty->termios->c_cflag & CLOCAL))
809 wake_up_interruptible(&ch->open_wait);
810 }
811
812 static void moxa_stop(struct tty_struct *tty)
813 {
814 struct moxa_port *ch = (struct moxa_port *) tty->driver_data;
815
816 if (ch == NULL)
817 return;
818 MoxaPortTxDisable(ch->port);
819 ch->statusflags |= TXSTOPPED;
820 }
821
822
823 static void moxa_start(struct tty_struct *tty)
824 {
825 struct moxa_port *ch = (struct moxa_port *) tty->driver_data;
826
827 if (ch == NULL)
828 return;
829
830 if (!(ch->statusflags & TXSTOPPED))
831 return;
832
833 MoxaPortTxEnable(ch->port);
834 ch->statusflags &= ~TXSTOPPED;
835 }
836
837 static void moxa_hangup(struct tty_struct *tty)
838 {
839 struct moxa_port *ch = (struct moxa_port *) tty->driver_data;
840
841 moxa_flush_buffer(tty);
842 moxa_shut_down(ch);
843 ch->event = 0;
844 ch->count = 0;
845 ch->asyncflags &= ~ASYNC_NORMAL_ACTIVE;
846 ch->tty = NULL;
847 wake_up_interruptible(&ch->open_wait);
848 }
849
850 static void moxa_poll(unsigned long ignored)
851 {
852 register int card;
853 struct moxa_port *ch;
854 struct tty_struct *tp;
855 int i, ports;
856
857 del_timer(&moxaTimer);
858
859 if (MoxaDriverPoll() < 0) {
860 mod_timer(&moxaTimer, jiffies + HZ / 50);
861 return;
862 }
863 for (card = 0; card < MAX_BOARDS; card++) {
864 if ((ports = MoxaPortsOfCard(card)) <= 0)
865 continue;
866 ch = &moxa_ports[card * MAX_PORTS_PER_BOARD];
867 for (i = 0; i < ports; i++, ch++) {
868 if ((ch->asyncflags & ASYNC_INITIALIZED) == 0)
869 continue;
870 if (!(ch->statusflags & THROTTLE) &&
871 (MoxaPortRxQueue(ch->port) > 0))
872 moxa_receive_data(ch);
873 if ((tp = ch->tty) == 0)
874 continue;
875 if (ch->statusflags & LOWWAIT) {
876 if (MoxaPortTxQueue(ch->port) <= WAKEUP_CHARS) {
877 if (!tp->stopped) {
878 ch->statusflags &= ~LOWWAIT;
879 tty_wakeup(tp);
880 }
881 }
882 }
883 if (!I_IGNBRK(tp) && (MoxaPortResetBrkCnt(ch->port) > 0)) {
884 tty_insert_flip_char(tp, 0, TTY_BREAK);
885 tty_schedule_flip(tp);
886 }
887 if (MoxaPortDCDChange(ch->port)) {
888 if (ch->asyncflags & ASYNC_CHECK_CD) {
889 if (MoxaPortDCDON(ch->port))
890 wake_up_interruptible(&ch->open_wait);
891 else {
892 tty_hangup(tp);
893 wake_up_interruptible(&ch->open_wait);
894 ch->asyncflags &= ~ASYNC_NORMAL_ACTIVE;
895 }
896 }
897 }
898 }
899 }
900
901 mod_timer(&moxaTimer, jiffies + HZ / 50);
902 }
903
904 /******************************************************************************/
905
906 static void moxa_set_tty_param(struct tty_struct *tty)
907 {
908 register struct ktermios *ts;
909 struct moxa_port *ch;
910 int rts, cts, txflow, rxflow, xany;
911
912 ch = (struct moxa_port *) tty->driver_data;
913 ts = tty->termios;
914 if (ts->c_cflag & CLOCAL)
915 ch->asyncflags &= ~ASYNC_CHECK_CD;
916 else
917 ch->asyncflags |= ASYNC_CHECK_CD;
918 rts = cts = txflow = rxflow = xany = 0;
919 if (ts->c_cflag & CRTSCTS)
920 rts = cts = 1;
921 if (ts->c_iflag & IXON)
922 txflow = 1;
923 if (ts->c_iflag & IXOFF)
924 rxflow = 1;
925 if (ts->c_iflag & IXANY)
926 xany = 1;
927 MoxaPortFlowCtrl(ch->port, rts, cts, txflow, rxflow, xany);
928 MoxaPortSetTermio(ch->port, ts, tty_get_baud_rate(tty));
929 }
930
931 static int moxa_block_till_ready(struct tty_struct *tty, struct file *filp,
932 struct moxa_port *ch)
933 {
934 DECLARE_WAITQUEUE(wait,current);
935 unsigned long flags;
936 int retval;
937 int do_clocal = C_CLOCAL(tty);
938
939 /*
940 * If the device is in the middle of being closed, then block
941 * until it's done, and then try again.
942 */
943 if (tty_hung_up_p(filp) || (ch->asyncflags & ASYNC_CLOSING)) {
944 if (ch->asyncflags & ASYNC_CLOSING)
945 wait_for_completion_interruptible(&ch->close_wait);
946 #ifdef SERIAL_DO_RESTART
947 if (ch->asyncflags & ASYNC_HUP_NOTIFY)
948 return (-EAGAIN);
949 else
950 return (-ERESTARTSYS);
951 #else
952 return (-EAGAIN);
953 #endif
954 }
955 /*
956 * If non-blocking mode is set, then make the check up front
957 * and then exit.
958 */
959 if (filp->f_flags & O_NONBLOCK) {
960 ch->asyncflags |= ASYNC_NORMAL_ACTIVE;
961 return (0);
962 }
963 /*
964 * Block waiting for the carrier detect and the line to become free
965 */
966 retval = 0;
967 add_wait_queue(&ch->open_wait, &wait);
968 pr_debug("block_til_ready before block: ttys%d, count = %d\n",
969 ch->port, ch->count);
970 spin_lock_irqsave(&moxa_lock, flags);
971 if (!tty_hung_up_p(filp))
972 ch->count--;
973 ch->blocked_open++;
974 spin_unlock_irqrestore(&moxa_lock, flags);
975
976 while (1) {
977 set_current_state(TASK_INTERRUPTIBLE);
978 if (tty_hung_up_p(filp) ||
979 !(ch->asyncflags & ASYNC_INITIALIZED)) {
980 #ifdef SERIAL_DO_RESTART
981 if (ch->asyncflags & ASYNC_HUP_NOTIFY)
982 retval = -EAGAIN;
983 else
984 retval = -ERESTARTSYS;
985 #else
986 retval = -EAGAIN;
987 #endif
988 break;
989 }
990 if (!(ch->asyncflags & ASYNC_CLOSING) && (do_clocal ||
991 MoxaPortDCDON(ch->port)))
992 break;
993
994 if (signal_pending(current)) {
995 retval = -ERESTARTSYS;
996 break;
997 }
998 schedule();
999 }
1000 set_current_state(TASK_RUNNING);
1001 remove_wait_queue(&ch->open_wait, &wait);
1002
1003 spin_lock_irqsave(&moxa_lock, flags);
1004 if (!tty_hung_up_p(filp))
1005 ch->count++;
1006 ch->blocked_open--;
1007 spin_unlock_irqrestore(&moxa_lock, flags);
1008 pr_debug("block_til_ready after blocking: ttys%d, count = %d\n",
1009 ch->port, ch->count);
1010 if (retval)
1011 return (retval);
1012 /* FIXME: review to see if we need to use set_bit on these */
1013 ch->asyncflags |= ASYNC_NORMAL_ACTIVE;
1014 return 0;
1015 }
1016
1017 static void moxa_setup_empty_event(struct tty_struct *tty)
1018 {
1019 struct moxa_port *ch = tty->driver_data;
1020 unsigned long flags;
1021
1022 spin_lock_irqsave(&moxa_lock, flags);
1023 ch->statusflags |= EMPTYWAIT;
1024 mod_timer(&moxa_ports[ch->port].emptyTimer, jiffies + HZ);
1025 spin_unlock_irqrestore(&moxa_lock, flags);
1026 }
1027
1028 static void moxa_check_xmit_empty(unsigned long data)
1029 {
1030 struct moxa_port *ch;
1031
1032 ch = (struct moxa_port *) data;
1033 if (ch->tty && (ch->statusflags & EMPTYWAIT)) {
1034 if (MoxaPortTxQueue(ch->port) == 0) {
1035 ch->statusflags &= ~EMPTYWAIT;
1036 tty_wakeup(ch->tty);
1037 return;
1038 }
1039 mod_timer(&moxa_ports[ch->port].emptyTimer,
1040 round_jiffies(jiffies + HZ));
1041 } else
1042 ch->statusflags &= ~EMPTYWAIT;
1043 }
1044
1045 static void moxa_shut_down(struct moxa_port *ch)
1046 {
1047 struct tty_struct *tp;
1048
1049 if (!(ch->asyncflags & ASYNC_INITIALIZED))
1050 return;
1051
1052 tp = ch->tty;
1053
1054 MoxaPortDisable(ch->port);
1055
1056 /*
1057 * If we're a modem control device and HUPCL is on, drop RTS & DTR.
1058 */
1059 if (tp->termios->c_cflag & HUPCL)
1060 MoxaPortLineCtrl(ch->port, 0, 0);
1061
1062 ch->asyncflags &= ~ASYNC_INITIALIZED;
1063 }
1064
1065 static void moxa_receive_data(struct moxa_port *ch)
1066 {
1067 struct tty_struct *tp;
1068 struct ktermios *ts;
1069 unsigned long flags;
1070
1071 ts = NULL;
1072 tp = ch->tty;
1073 if (tp)
1074 ts = tp->termios;
1075 /**************************************************
1076 if ( !tp || !ts || !(ts->c_cflag & CREAD) ) {
1077 *****************************************************/
1078 if (!tp || !ts) {
1079 MoxaPortFlushData(ch->port, 0);
1080 return;
1081 }
1082 spin_lock_irqsave(&moxa_lock, flags);
1083 MoxaPortReadData(ch->port, tp);
1084 spin_unlock_irqrestore(&moxa_lock, flags);
1085 tty_schedule_flip(tp);
1086 }
1087
1088 #define Magic_code 0x404
1089
1090 /*
1091 * System Configuration
1092 */
1093 /*
1094 * for C218 BIOS initialization
1095 */
1096 #define C218_ConfBase 0x800
1097 #define C218_status (C218_ConfBase + 0) /* BIOS running status */
1098 #define C218_diag (C218_ConfBase + 2) /* diagnostic status */
1099 #define C218_key (C218_ConfBase + 4) /* WORD (0x218 for C218) */
1100 #define C218DLoad_len (C218_ConfBase + 6) /* WORD */
1101 #define C218check_sum (C218_ConfBase + 8) /* BYTE */
1102 #define C218chksum_ok (C218_ConfBase + 0x0a) /* BYTE (1:ok) */
1103 #define C218_TestRx (C218_ConfBase + 0x10) /* 8 bytes for 8 ports */
1104 #define C218_TestTx (C218_ConfBase + 0x18) /* 8 bytes for 8 ports */
1105 #define C218_RXerr (C218_ConfBase + 0x20) /* 8 bytes for 8 ports */
1106 #define C218_ErrFlag (C218_ConfBase + 0x28) /* 8 bytes for 8 ports */
1107
1108 #define C218_LoadBuf 0x0F00
1109 #define C218_KeyCode 0x218
1110 #define CP204J_KeyCode 0x204
1111
1112 /*
1113 * for C320 BIOS initialization
1114 */
1115 #define C320_ConfBase 0x800
1116 #define C320_LoadBuf 0x0f00
1117 #define STS_init 0x05 /* for C320_status */
1118
1119 #define C320_status C320_ConfBase + 0 /* BIOS running status */
1120 #define C320_diag C320_ConfBase + 2 /* diagnostic status */
1121 #define C320_key C320_ConfBase + 4 /* WORD (0320H for C320) */
1122 #define C320DLoad_len C320_ConfBase + 6 /* WORD */
1123 #define C320check_sum C320_ConfBase + 8 /* WORD */
1124 #define C320chksum_ok C320_ConfBase + 0x0a /* WORD (1:ok) */
1125 #define C320bapi_len C320_ConfBase + 0x0c /* WORD */
1126 #define C320UART_no C320_ConfBase + 0x0e /* WORD */
1127
1128 #define C320_KeyCode 0x320
1129
1130 #define FixPage_addr 0x0000 /* starting addr of static page */
1131 #define DynPage_addr 0x2000 /* starting addr of dynamic page */
1132 #define C218_start 0x3000 /* starting addr of C218 BIOS prg */
1133 #define Control_reg 0x1ff0 /* select page and reset control */
1134 #define HW_reset 0x80
1135
1136 /*
1137 * Function Codes
1138 */
1139 #define FC_CardReset 0x80
1140 #define FC_ChannelReset 1 /* C320 firmware not supported */
1141 #define FC_EnableCH 2
1142 #define FC_DisableCH 3
1143 #define FC_SetParam 4
1144 #define FC_SetMode 5
1145 #define FC_SetRate 6
1146 #define FC_LineControl 7
1147 #define FC_LineStatus 8
1148 #define FC_XmitControl 9
1149 #define FC_FlushQueue 10
1150 #define FC_SendBreak 11
1151 #define FC_StopBreak 12
1152 #define FC_LoopbackON 13
1153 #define FC_LoopbackOFF 14
1154 #define FC_ClrIrqTable 15
1155 #define FC_SendXon 16
1156 #define FC_SetTermIrq 17 /* C320 firmware not supported */
1157 #define FC_SetCntIrq 18 /* C320 firmware not supported */
1158 #define FC_SetBreakIrq 19
1159 #define FC_SetLineIrq 20
1160 #define FC_SetFlowCtl 21
1161 #define FC_GenIrq 22
1162 #define FC_InCD180 23
1163 #define FC_OutCD180 24
1164 #define FC_InUARTreg 23
1165 #define FC_OutUARTreg 24
1166 #define FC_SetXonXoff 25
1167 #define FC_OutCD180CCR 26
1168 #define FC_ExtIQueue 27
1169 #define FC_ExtOQueue 28
1170 #define FC_ClrLineIrq 29
1171 #define FC_HWFlowCtl 30
1172 #define FC_GetClockRate 35
1173 #define FC_SetBaud 36
1174 #define FC_SetDataMode 41
1175 #define FC_GetCCSR 43
1176 #define FC_GetDataError 45
1177 #define FC_RxControl 50
1178 #define FC_ImmSend 51
1179 #define FC_SetXonState 52
1180 #define FC_SetXoffState 53
1181 #define FC_SetRxFIFOTrig 54
1182 #define FC_SetTxFIFOCnt 55
1183 #define FC_UnixRate 56
1184 #define FC_UnixResetTimer 57
1185
1186 #define RxFIFOTrig1 0
1187 #define RxFIFOTrig4 1
1188 #define RxFIFOTrig8 2
1189 #define RxFIFOTrig14 3
1190
1191 /*
1192 * Dual-Ported RAM
1193 */
1194 #define DRAM_global 0
1195 #define INT_data (DRAM_global + 0)
1196 #define Config_base (DRAM_global + 0x108)
1197
1198 #define IRQindex (INT_data + 0)
1199 #define IRQpending (INT_data + 4)
1200 #define IRQtable (INT_data + 8)
1201
1202 /*
1203 * Interrupt Status
1204 */
1205 #define IntrRx 0x01 /* receiver data O.K. */
1206 #define IntrTx 0x02 /* transmit buffer empty */
1207 #define IntrFunc 0x04 /* function complete */
1208 #define IntrBreak 0x08 /* received break */
1209 #define IntrLine 0x10 /* line status change
1210 for transmitter */
1211 #define IntrIntr 0x20 /* received INTR code */
1212 #define IntrQuit 0x40 /* received QUIT code */
1213 #define IntrEOF 0x80 /* received EOF code */
1214
1215 #define IntrRxTrigger 0x100 /* rx data count reach tigger value */
1216 #define IntrTxTrigger 0x200 /* tx data count below trigger value */
1217
1218 #define Magic_no (Config_base + 0)
1219 #define Card_model_no (Config_base + 2)
1220 #define Total_ports (Config_base + 4)
1221 #define Module_cnt (Config_base + 8)
1222 #define Module_no (Config_base + 10)
1223 #define Timer_10ms (Config_base + 14)
1224 #define Disable_IRQ (Config_base + 20)
1225 #define TMS320_PORT1 (Config_base + 22)
1226 #define TMS320_PORT2 (Config_base + 24)
1227 #define TMS320_CLOCK (Config_base + 26)
1228
1229 /*
1230 * DATA BUFFER in DRAM
1231 */
1232 #define Extern_table 0x400 /* Base address of the external table
1233 (24 words * 64) total 3K bytes
1234 (24 words * 128) total 6K bytes */
1235 #define Extern_size 0x60 /* 96 bytes */
1236 #define RXrptr 0x00 /* read pointer for RX buffer */
1237 #define RXwptr 0x02 /* write pointer for RX buffer */
1238 #define TXrptr 0x04 /* read pointer for TX buffer */
1239 #define TXwptr 0x06 /* write pointer for TX buffer */
1240 #define HostStat 0x08 /* IRQ flag and general flag */
1241 #define FlagStat 0x0A
1242 #define FlowControl 0x0C /* B7 B6 B5 B4 B3 B2 B1 B0 */
1243 /* x x x x | | | | */
1244 /* | | | + CTS flow */
1245 /* | | +--- RTS flow */
1246 /* | +------ TX Xon/Xoff */
1247 /* +--------- RX Xon/Xoff */
1248 #define Break_cnt 0x0E /* received break count */
1249 #define CD180TXirq 0x10 /* if non-0: enable TX irq */
1250 #define RX_mask 0x12
1251 #define TX_mask 0x14
1252 #define Ofs_rxb 0x16
1253 #define Ofs_txb 0x18
1254 #define Page_rxb 0x1A
1255 #define Page_txb 0x1C
1256 #define EndPage_rxb 0x1E
1257 #define EndPage_txb 0x20
1258 #define Data_error 0x22
1259 #define RxTrigger 0x28
1260 #define TxTrigger 0x2a
1261
1262 #define rRXwptr 0x34
1263 #define Low_water 0x36
1264
1265 #define FuncCode 0x40
1266 #define FuncArg 0x42
1267 #define FuncArg1 0x44
1268
1269 #define C218rx_size 0x2000 /* 8K bytes */
1270 #define C218tx_size 0x8000 /* 32K bytes */
1271
1272 #define C218rx_mask (C218rx_size - 1)
1273 #define C218tx_mask (C218tx_size - 1)
1274
1275 #define C320p8rx_size 0x2000
1276 #define C320p8tx_size 0x8000
1277 #define C320p8rx_mask (C320p8rx_size - 1)
1278 #define C320p8tx_mask (C320p8tx_size - 1)
1279
1280 #define C320p16rx_size 0x2000
1281 #define C320p16tx_size 0x4000
1282 #define C320p16rx_mask (C320p16rx_size - 1)
1283 #define C320p16tx_mask (C320p16tx_size - 1)
1284
1285 #define C320p24rx_size 0x2000
1286 #define C320p24tx_size 0x2000
1287 #define C320p24rx_mask (C320p24rx_size - 1)
1288 #define C320p24tx_mask (C320p24tx_size - 1)
1289
1290 #define C320p32rx_size 0x1000
1291 #define C320p32tx_size 0x1000
1292 #define C320p32rx_mask (C320p32rx_size - 1)
1293 #define C320p32tx_mask (C320p32tx_size - 1)
1294
1295 #define Page_size 0x2000
1296 #define Page_mask (Page_size - 1)
1297 #define C218rx_spage 3
1298 #define C218tx_spage 4
1299 #define C218rx_pageno 1
1300 #define C218tx_pageno 4
1301 #define C218buf_pageno 5
1302
1303 #define C320p8rx_spage 3
1304 #define C320p8tx_spage 4
1305 #define C320p8rx_pgno 1
1306 #define C320p8tx_pgno 4
1307 #define C320p8buf_pgno 5
1308
1309 #define C320p16rx_spage 3
1310 #define C320p16tx_spage 4
1311 #define C320p16rx_pgno 1
1312 #define C320p16tx_pgno 2
1313 #define C320p16buf_pgno 3
1314
1315 #define C320p24rx_spage 3
1316 #define C320p24tx_spage 4
1317 #define C320p24rx_pgno 1
1318 #define C320p24tx_pgno 1
1319 #define C320p24buf_pgno 2
1320
1321 #define C320p32rx_spage 3
1322 #define C320p32tx_ofs C320p32rx_size
1323 #define C320p32tx_spage 3
1324 #define C320p32buf_pgno 1
1325
1326 /*
1327 * Host Status
1328 */
1329 #define WakeupRx 0x01
1330 #define WakeupTx 0x02
1331 #define WakeupBreak 0x08
1332 #define WakeupLine 0x10
1333 #define WakeupIntr 0x20
1334 #define WakeupQuit 0x40
1335 #define WakeupEOF 0x80 /* used in VTIME control */
1336 #define WakeupRxTrigger 0x100
1337 #define WakeupTxTrigger 0x200
1338 /*
1339 * Flag status
1340 */
1341 #define Rx_over 0x01
1342 #define Xoff_state 0x02
1343 #define Tx_flowOff 0x04
1344 #define Tx_enable 0x08
1345 #define CTS_state 0x10
1346 #define DSR_state 0x20
1347 #define DCD_state 0x80
1348 /*
1349 * FlowControl
1350 */
1351 #define CTS_FlowCtl 1
1352 #define RTS_FlowCtl 2
1353 #define Tx_FlowCtl 4
1354 #define Rx_FlowCtl 8
1355 #define IXM_IXANY 0x10
1356
1357 #define LowWater 128
1358
1359 #define DTR_ON 1
1360 #define RTS_ON 2
1361 #define CTS_ON 1
1362 #define DSR_ON 2
1363 #define DCD_ON 8
1364
1365 /* mode definition */
1366 #define MX_CS8 0x03
1367 #define MX_CS7 0x02
1368 #define MX_CS6 0x01
1369 #define MX_CS5 0x00
1370
1371 #define MX_STOP1 0x00
1372 #define MX_STOP15 0x04
1373 #define MX_STOP2 0x08
1374
1375 #define MX_PARNONE 0x00
1376 #define MX_PAREVEN 0x40
1377 #define MX_PARODD 0xC0
1378
1379 /*
1380 * Query
1381 */
1382
1383 struct mon_str {
1384 int tick;
1385 int rxcnt[MAX_PORTS];
1386 int txcnt[MAX_PORTS];
1387 };
1388
1389 #define DCD_changed 0x01
1390 #define DCD_oldstate 0x80
1391
1392 static unsigned char moxaBuff[10240];
1393 static int moxaLowWaterChk;
1394 static int moxaCard;
1395 static struct mon_str moxaLog;
1396 static int moxaFuncTout = HZ / 2;
1397
1398 static void moxafunc(void __iomem *, int, ushort);
1399 static void moxa_wait_finish(void __iomem *);
1400 static void moxa_low_water_check(void __iomem *);
1401 static int moxaloadbios(int, unsigned char __user *, int);
1402 static int moxafindcard(int);
1403 static int moxaload320b(int, unsigned char __user *, int);
1404 static int moxaloadcode(int, unsigned char __user *, int);
1405 static int moxaloadc218(int, void __iomem *, int);
1406 static int moxaloadc320(int, void __iomem *, int, int *);
1407
1408 /*****************************************************************************
1409 * Driver level functions: *
1410 * 1. MoxaDriverInit(void); *
1411 * 2. MoxaDriverIoctl(unsigned int cmd, unsigned long arg, int port); *
1412 * 3. MoxaDriverPoll(void); *
1413 *****************************************************************************/
1414 void MoxaDriverInit(void)
1415 {
1416 struct moxa_port *p;
1417 unsigned int i;
1418
1419 moxaFuncTout = HZ / 2; /* 500 mini-seconds */
1420 moxaCard = 0;
1421 moxaLog.tick = 0;
1422 moxaLowWaterChk = 0;
1423 for (i = 0; i < MAX_PORTS; i++) {
1424 p = &moxa_ports[i];
1425 p->chkPort = 0;
1426 p->lowChkFlag = 0;
1427 p->lineCtrl = 0;
1428 moxaLog.rxcnt[i] = 0;
1429 moxaLog.txcnt[i] = 0;
1430 }
1431 }
1432
1433 #define MOXA 0x400
1434 #define MOXA_GET_IQUEUE (MOXA + 1) /* get input buffered count */
1435 #define MOXA_GET_OQUEUE (MOXA + 2) /* get output buffered count */
1436 #define MOXA_INIT_DRIVER (MOXA + 6) /* moxaCard=0 */
1437 #define MOXA_LOAD_BIOS (MOXA + 9) /* download BIOS */
1438 #define MOXA_FIND_BOARD (MOXA + 10) /* Check if MOXA card exist? */
1439 #define MOXA_LOAD_C320B (MOXA + 11) /* download 320B firmware */
1440 #define MOXA_LOAD_CODE (MOXA + 12) /* download firmware */
1441 #define MOXA_GETDATACOUNT (MOXA + 23)
1442 #define MOXA_GET_IOQUEUE (MOXA + 27)
1443 #define MOXA_FLUSH_QUEUE (MOXA + 28)
1444 #define MOXA_GET_CONF (MOXA + 35) /* configuration */
1445 #define MOXA_GET_MAJOR (MOXA + 63)
1446 #define MOXA_GET_CUMAJOR (MOXA + 64)
1447 #define MOXA_GETMSTATUS (MOXA + 65)
1448
1449 struct dl_str {
1450 char __user *buf;
1451 int len;
1452 int cardno;
1453 };
1454
1455 static struct dl_str dltmp;
1456
1457 void MoxaPortFlushData(int port, int mode)
1458 {
1459 void __iomem *ofsAddr;
1460 if ((mode < 0) || (mode > 2))
1461 return;
1462 ofsAddr = moxa_ports[port].tableAddr;
1463 moxafunc(ofsAddr, FC_FlushQueue, mode);
1464 if (mode != 1) {
1465 moxa_ports[port].lowChkFlag = 0;
1466 moxa_low_water_check(ofsAddr);
1467 }
1468 }
1469
1470 int MoxaDriverIoctl(unsigned int cmd, unsigned long arg, int port)
1471 {
1472 int i;
1473 int status;
1474 int MoxaPortTxQueue(int), MoxaPortRxQueue(int);
1475 void __user *argp = (void __user *)arg;
1476
1477 if (port == MAX_PORTS) {
1478 if ((cmd != MOXA_GET_CONF) && (cmd != MOXA_INIT_DRIVER) &&
1479 (cmd != MOXA_LOAD_BIOS) && (cmd != MOXA_FIND_BOARD) && (cmd != MOXA_LOAD_C320B) &&
1480 (cmd != MOXA_LOAD_CODE) && (cmd != MOXA_GETDATACOUNT) &&
1481 (cmd != MOXA_GET_IOQUEUE) && (cmd != MOXA_GET_MAJOR) &&
1482 (cmd != MOXA_GET_CUMAJOR) && (cmd != MOXA_GETMSTATUS))
1483 return (-EINVAL);
1484 }
1485 switch (cmd) {
1486 case MOXA_GET_CONF:
1487 if(copy_to_user(argp, &moxa_boards, MAX_BOARDS *
1488 sizeof(struct moxa_board_conf)))
1489 return -EFAULT;
1490 return (0);
1491 case MOXA_INIT_DRIVER:
1492 if ((int) arg == 0x404)
1493 MoxaDriverInit();
1494 return (0);
1495 case MOXA_GETDATACOUNT:
1496 moxaLog.tick = jiffies;
1497 if(copy_to_user(argp, &moxaLog, sizeof(struct mon_str)))
1498 return -EFAULT;
1499 return (0);
1500 case MOXA_FLUSH_QUEUE:
1501 MoxaPortFlushData(port, arg);
1502 return (0);
1503 case MOXA_GET_IOQUEUE: {
1504 struct moxaq_str __user *argm = argp;
1505 struct moxaq_str tmp;
1506
1507 for (i = 0; i < MAX_PORTS; i++, argm++) {
1508 memset(&tmp, 0, sizeof(tmp));
1509 if (moxa_ports[i].chkPort) {
1510 tmp.inq = MoxaPortRxQueue(i);
1511 tmp.outq = MoxaPortTxQueue(i);
1512 }
1513 if (copy_to_user(argm, &tmp, sizeof(tmp)))
1514 return -EFAULT;
1515 }
1516 return (0);
1517 } case MOXA_GET_OQUEUE:
1518 i = MoxaPortTxQueue(port);
1519 return put_user(i, (unsigned long __user *)argp);
1520 case MOXA_GET_IQUEUE:
1521 i = MoxaPortRxQueue(port);
1522 return put_user(i, (unsigned long __user *)argp);
1523 case MOXA_GET_MAJOR:
1524 if(copy_to_user(argp, &ttymajor, sizeof(int)))
1525 return -EFAULT;
1526 return 0;
1527 case MOXA_GET_CUMAJOR:
1528 i = 0;
1529 if(copy_to_user(argp, &i, sizeof(int)))
1530 return -EFAULT;
1531 return 0;
1532 case MOXA_GETMSTATUS: {
1533 struct mxser_mstatus __user *argm = argp;
1534 struct mxser_mstatus tmp;
1535 struct moxa_port *p;
1536
1537 for (i = 0; i < MAX_PORTS; i++, argm++) {
1538 p = &moxa_ports[i];
1539 memset(&tmp, 0, sizeof(tmp));
1540 if (!p->chkPort) {
1541 goto copy;
1542 } else {
1543 status = MoxaPortLineStatus(p->port);
1544 if (status & 1)
1545 tmp.cts = 1;
1546 if (status & 2)
1547 tmp.dsr = 1;
1548 if (status & 4)
1549 tmp.dcd = 1;
1550 }
1551
1552 if (!p->tty || !p->tty->termios)
1553 tmp.cflag = p->cflag;
1554 else
1555 tmp.cflag = p->tty->termios->c_cflag;
1556 copy:
1557 if (copy_to_user(argm, &tmp, sizeof(tmp)))
1558 return -EFAULT;
1559 }
1560 return 0;
1561 } default:
1562 return (-ENOIOCTLCMD);
1563 case MOXA_LOAD_BIOS:
1564 case MOXA_FIND_BOARD:
1565 case MOXA_LOAD_C320B:
1566 case MOXA_LOAD_CODE:
1567 if (!capable(CAP_SYS_RAWIO))
1568 return -EPERM;
1569 break;
1570 }
1571
1572 if(copy_from_user(&dltmp, argp, sizeof(struct dl_str)))
1573 return -EFAULT;
1574 if(dltmp.cardno < 0 || dltmp.cardno >= MAX_BOARDS || dltmp.len < 0)
1575 return -EINVAL;
1576
1577 switch(cmd)
1578 {
1579 case MOXA_LOAD_BIOS:
1580 i = moxaloadbios(dltmp.cardno, dltmp.buf, dltmp.len);
1581 return (i);
1582 case MOXA_FIND_BOARD:
1583 return moxafindcard(dltmp.cardno);
1584 case MOXA_LOAD_C320B:
1585 moxaload320b(dltmp.cardno, dltmp.buf, dltmp.len);
1586 default: /* to keep gcc happy */
1587 return (0);
1588 case MOXA_LOAD_CODE:
1589 i = moxaloadcode(dltmp.cardno, dltmp.buf, dltmp.len);
1590 if (i == -1)
1591 return (-EFAULT);
1592 return (i);
1593
1594 }
1595 }
1596
1597 int MoxaDriverPoll(void)
1598 {
1599 struct moxa_board_conf *brd;
1600 register ushort temp;
1601 register int card;
1602 void __iomem *ofsAddr;
1603 void __iomem *ip;
1604 int port, p, ports;
1605
1606 if (moxaCard == 0)
1607 return (-1);
1608 for (card = 0; card < MAX_BOARDS; card++) {
1609 brd = &moxa_boards[card];
1610 if (brd->loadstat == 0)
1611 continue;
1612 if ((ports = brd->numPorts) == 0)
1613 continue;
1614 if (readb(brd->intPend) == 0xff) {
1615 ip = brd->intTable + readb(brd->intNdx);
1616 p = card * MAX_PORTS_PER_BOARD;
1617 ports <<= 1;
1618 for (port = 0; port < ports; port += 2, p++) {
1619 if ((temp = readw(ip + port)) != 0) {
1620 writew(0, ip + port);
1621 ofsAddr = moxa_ports[p].tableAddr;
1622 if (temp & IntrTx)
1623 writew(readw(ofsAddr + HostStat) & ~WakeupTx, ofsAddr + HostStat);
1624 if (temp & IntrBreak) {
1625 moxa_ports[p].breakCnt++;
1626 }
1627 if (temp & IntrLine) {
1628 if (readb(ofsAddr + FlagStat) & DCD_state) {
1629 if ((moxa_ports[p].DCDState & DCD_oldstate) == 0)
1630 moxa_ports[p].DCDState = (DCD_oldstate |
1631 DCD_changed);
1632 } else {
1633 if (moxa_ports[p].DCDState & DCD_oldstate)
1634 moxa_ports[p].DCDState = DCD_changed;
1635 }
1636 }
1637 }
1638 }
1639 writeb(0, brd->intPend);
1640 }
1641 if (moxaLowWaterChk) {
1642 p = card * MAX_PORTS_PER_BOARD;
1643 for (port = 0; port < ports; port++, p++) {
1644 if (moxa_ports[p].lowChkFlag) {
1645 moxa_ports[p].lowChkFlag = 0;
1646 ofsAddr = moxa_ports[p].tableAddr;
1647 moxa_low_water_check(ofsAddr);
1648 }
1649 }
1650 }
1651 }
1652 moxaLowWaterChk = 0;
1653 return (0);
1654 }
1655
1656 /*****************************************************************************
1657 * Card level function: *
1658 * 1. MoxaPortsOfCard(int cardno); *
1659 *****************************************************************************/
1660 int MoxaPortsOfCard(int cardno)
1661 {
1662
1663 if (moxa_boards[cardno].boardType == 0)
1664 return (0);
1665 return (moxa_boards[cardno].numPorts);
1666 }
1667
1668 /*****************************************************************************
1669 * Port level functions: *
1670 * 1. MoxaPortIsValid(int port); *
1671 * 2. MoxaPortEnable(int port); *
1672 * 3. MoxaPortDisable(int port); *
1673 * 4. MoxaPortGetMaxBaud(int port); *
1674 * 6. MoxaPortSetBaud(int port, long baud); *
1675 * 8. MoxaPortSetTermio(int port, unsigned char *termio); *
1676 * 9. MoxaPortGetLineOut(int port, int *dtrState, int *rtsState); *
1677 * 10. MoxaPortLineCtrl(int port, int dtrState, int rtsState); *
1678 * 11. MoxaPortFlowCtrl(int port, int rts, int cts, int rx, int tx,int xany); *
1679 * 12. MoxaPortLineStatus(int port); *
1680 * 13. MoxaPortDCDChange(int port); *
1681 * 14. MoxaPortDCDON(int port); *
1682 * 15. MoxaPortFlushData(int port, int mode); *
1683 * 16. MoxaPortWriteData(int port, unsigned char * buffer, int length); *
1684 * 17. MoxaPortReadData(int port, struct tty_struct *tty); *
1685 * 20. MoxaPortTxQueue(int port); *
1686 * 21. MoxaPortTxFree(int port); *
1687 * 22. MoxaPortRxQueue(int port); *
1688 * 24. MoxaPortTxDisable(int port); *
1689 * 25. MoxaPortTxEnable(int port); *
1690 * 27. MoxaPortResetBrkCnt(int port); *
1691 * 30. MoxaPortSendBreak(int port, int ticks); *
1692 *****************************************************************************/
1693 /*
1694 * Moxa Port Number Description:
1695 *
1696 * MOXA serial driver supports up to 4 MOXA-C218/C320 boards. And,
1697 * the port number using in MOXA driver functions will be 0 to 31 for
1698 * first MOXA board, 32 to 63 for second, 64 to 95 for third and 96
1699 * to 127 for fourth. For example, if you setup three MOXA boards,
1700 * first board is C218, second board is C320-16 and third board is
1701 * C320-32. The port number of first board (C218 - 8 ports) is from
1702 * 0 to 7. The port number of second board (C320 - 16 ports) is form
1703 * 32 to 47. The port number of third board (C320 - 32 ports) is from
1704 * 64 to 95. And those port numbers form 8 to 31, 48 to 63 and 96 to
1705 * 127 will be invalid.
1706 *
1707 *
1708 * Moxa Functions Description:
1709 *
1710 * Function 1: Driver initialization routine, this routine must be
1711 * called when initialized driver.
1712 * Syntax:
1713 * void MoxaDriverInit();
1714 *
1715 *
1716 * Function 2: Moxa driver private IOCTL command processing.
1717 * Syntax:
1718 * int MoxaDriverIoctl(unsigned int cmd, unsigned long arg, int port);
1719 *
1720 * unsigned int cmd : IOCTL command
1721 * unsigned long arg : IOCTL argument
1722 * int port : port number (0 - 127)
1723 *
1724 * return: 0 (OK)
1725 * -EINVAL
1726 * -ENOIOCTLCMD
1727 *
1728 *
1729 * Function 3: Moxa driver polling process routine.
1730 * Syntax:
1731 * int MoxaDriverPoll(void);
1732 *
1733 * return: 0 ; polling O.K.
1734 * -1 : no any Moxa card.
1735 *
1736 *
1737 * Function 4: Get the ports of this card.
1738 * Syntax:
1739 * int MoxaPortsOfCard(int cardno);
1740 *
1741 * int cardno : card number (0 - 3)
1742 *
1743 * return: 0 : this card is invalid
1744 * 8/16/24/32
1745 *
1746 *
1747 * Function 5: Check this port is valid or invalid
1748 * Syntax:
1749 * int MoxaPortIsValid(int port);
1750 * int port : port number (0 - 127, ref port description)
1751 *
1752 * return: 0 : this port is invalid
1753 * 1 : this port is valid
1754 *
1755 *
1756 * Function 6: Enable this port to start Tx/Rx data.
1757 * Syntax:
1758 * void MoxaPortEnable(int port);
1759 * int port : port number (0 - 127)
1760 *
1761 *
1762 * Function 7: Disable this port
1763 * Syntax:
1764 * void MoxaPortDisable(int port);
1765 * int port : port number (0 - 127)
1766 *
1767 *
1768 * Function 8: Get the maximun available baud rate of this port.
1769 * Syntax:
1770 * long MoxaPortGetMaxBaud(int port);
1771 * int port : port number (0 - 127)
1772 *
1773 * return: 0 : this port is invalid
1774 * 38400/57600/115200 bps
1775 *
1776 *
1777 * Function 10: Setting baud rate of this port.
1778 * Syntax:
1779 * long MoxaPortSetBaud(int port, long baud);
1780 * int port : port number (0 - 127)
1781 * long baud : baud rate (50 - 115200)
1782 *
1783 * return: 0 : this port is invalid or baud < 50
1784 * 50 - 115200 : the real baud rate set to the port, if
1785 * the argument baud is large than maximun
1786 * available baud rate, the real setting
1787 * baud rate will be the maximun baud rate.
1788 *
1789 *
1790 * Function 12: Configure the port.
1791 * Syntax:
1792 * int MoxaPortSetTermio(int port, struct ktermios *termio, speed_t baud);
1793 * int port : port number (0 - 127)
1794 * struct ktermios * termio : termio structure pointer
1795 * speed_t baud : baud rate
1796 *
1797 * return: -1 : this port is invalid or termio == NULL
1798 * 0 : setting O.K.
1799 *
1800 *
1801 * Function 13: Get the DTR/RTS state of this port.
1802 * Syntax:
1803 * int MoxaPortGetLineOut(int port, int *dtrState, int *rtsState);
1804 * int port : port number (0 - 127)
1805 * int * dtrState : pointer to INT to receive the current DTR
1806 * state. (if NULL, this function will not
1807 * write to this address)
1808 * int * rtsState : pointer to INT to receive the current RTS
1809 * state. (if NULL, this function will not
1810 * write to this address)
1811 *
1812 * return: -1 : this port is invalid
1813 * 0 : O.K.
1814 *
1815 *
1816 * Function 14: Setting the DTR/RTS output state of this port.
1817 * Syntax:
1818 * void MoxaPortLineCtrl(int port, int dtrState, int rtsState);
1819 * int port : port number (0 - 127)
1820 * int dtrState : DTR output state (0: off, 1: on)
1821 * int rtsState : RTS output state (0: off, 1: on)
1822 *
1823 *
1824 * Function 15: Setting the flow control of this port.
1825 * Syntax:
1826 * void MoxaPortFlowCtrl(int port, int rtsFlow, int ctsFlow, int rxFlow,
1827 * int txFlow,int xany);
1828 * int port : port number (0 - 127)
1829 * int rtsFlow : H/W RTS flow control (0: no, 1: yes)
1830 * int ctsFlow : H/W CTS flow control (0: no, 1: yes)
1831 * int rxFlow : S/W Rx XON/XOFF flow control (0: no, 1: yes)
1832 * int txFlow : S/W Tx XON/XOFF flow control (0: no, 1: yes)
1833 * int xany : S/W XANY flow control (0: no, 1: yes)
1834 *
1835 *
1836 * Function 16: Get ths line status of this port
1837 * Syntax:
1838 * int MoxaPortLineStatus(int port);
1839 * int port : port number (0 - 127)
1840 *
1841 * return: Bit 0 - CTS state (0: off, 1: on)
1842 * Bit 1 - DSR state (0: off, 1: on)
1843 * Bit 2 - DCD state (0: off, 1: on)
1844 *
1845 *
1846 * Function 17: Check the DCD state has changed since the last read
1847 * of this function.
1848 * Syntax:
1849 * int MoxaPortDCDChange(int port);
1850 * int port : port number (0 - 127)
1851 *
1852 * return: 0 : no changed
1853 * 1 : DCD has changed
1854 *
1855 *
1856 * Function 18: Check ths current DCD state is ON or not.
1857 * Syntax:
1858 * int MoxaPortDCDON(int port);
1859 * int port : port number (0 - 127)
1860 *
1861 * return: 0 : DCD off
1862 * 1 : DCD on
1863 *
1864 *
1865 * Function 19: Flush the Rx/Tx buffer data of this port.
1866 * Syntax:
1867 * void MoxaPortFlushData(int port, int mode);
1868 * int port : port number (0 - 127)
1869 * int mode
1870 * 0 : flush the Rx buffer
1871 * 1 : flush the Tx buffer
1872 * 2 : flush the Rx and Tx buffer
1873 *
1874 *
1875 * Function 20: Write data.
1876 * Syntax:
1877 * int MoxaPortWriteData(int port, unsigned char * buffer, int length);
1878 * int port : port number (0 - 127)
1879 * unsigned char * buffer : pointer to write data buffer.
1880 * int length : write data length
1881 *
1882 * return: 0 - length : real write data length
1883 *
1884 *
1885 * Function 21: Read data.
1886 * Syntax:
1887 * int MoxaPortReadData(int port, struct tty_struct *tty);
1888 * int port : port number (0 - 127)
1889 * struct tty_struct *tty : tty for data
1890 *
1891 * return: 0 - length : real read data length
1892 *
1893 *
1894 * Function 24: Get the Tx buffer current queued data bytes
1895 * Syntax:
1896 * int MoxaPortTxQueue(int port);
1897 * int port : port number (0 - 127)
1898 *
1899 * return: .. : Tx buffer current queued data bytes
1900 *
1901 *
1902 * Function 25: Get the Tx buffer current free space
1903 * Syntax:
1904 * int MoxaPortTxFree(int port);
1905 * int port : port number (0 - 127)
1906 *
1907 * return: .. : Tx buffer current free space
1908 *
1909 *
1910 * Function 26: Get the Rx buffer current queued data bytes
1911 * Syntax:
1912 * int MoxaPortRxQueue(int port);
1913 * int port : port number (0 - 127)
1914 *
1915 * return: .. : Rx buffer current queued data bytes
1916 *
1917 *
1918 * Function 28: Disable port data transmission.
1919 * Syntax:
1920 * void MoxaPortTxDisable(int port);
1921 * int port : port number (0 - 127)
1922 *
1923 *
1924 * Function 29: Enable port data transmission.
1925 * Syntax:
1926 * void MoxaPortTxEnable(int port);
1927 * int port : port number (0 - 127)
1928 *
1929 *
1930 * Function 31: Get the received BREAK signal count and reset it.
1931 * Syntax:
1932 * int MoxaPortResetBrkCnt(int port);
1933 * int port : port number (0 - 127)
1934 *
1935 * return: 0 - .. : BREAK signal count
1936 *
1937 *
1938 * Function 34: Send out a BREAK signal.
1939 * Syntax:
1940 * void MoxaPortSendBreak(int port, int ms100);
1941 * int port : port number (0 - 127)
1942 * int ms100 : break signal time interval.
1943 * unit: 100 mini-second. if ms100 == 0, it will
1944 * send out a about 250 ms BREAK signal.
1945 *
1946 */
1947 int MoxaPortIsValid(int port)
1948 {
1949
1950 if (moxaCard == 0)
1951 return (0);
1952 if (moxa_ports[port].chkPort == 0)
1953 return (0);
1954 return (1);
1955 }
1956
1957 void MoxaPortEnable(int port)
1958 {
1959 void __iomem *ofsAddr;
1960 int MoxaPortLineStatus(int);
1961 short lowwater = 512;
1962
1963 ofsAddr = moxa_ports[port].tableAddr;
1964 writew(lowwater, ofsAddr + Low_water);
1965 moxa_ports[port].breakCnt = 0;
1966 if ((moxa_boards[port / MAX_PORTS_PER_BOARD].boardType == MOXA_BOARD_C320_ISA) ||
1967 (moxa_boards[port / MAX_PORTS_PER_BOARD].boardType == MOXA_BOARD_C320_PCI)) {
1968 moxafunc(ofsAddr, FC_SetBreakIrq, 0);
1969 } else {
1970 writew(readw(ofsAddr + HostStat) | WakeupBreak, ofsAddr + HostStat);
1971 }
1972
1973 moxafunc(ofsAddr, FC_SetLineIrq, Magic_code);
1974 moxafunc(ofsAddr, FC_FlushQueue, 2);
1975
1976 moxafunc(ofsAddr, FC_EnableCH, Magic_code);
1977 MoxaPortLineStatus(port);
1978 }
1979
1980 void MoxaPortDisable(int port)
1981 {
1982 void __iomem *ofsAddr = moxa_ports[port].tableAddr;
1983
1984 moxafunc(ofsAddr, FC_SetFlowCtl, 0); /* disable flow control */
1985 moxafunc(ofsAddr, FC_ClrLineIrq, Magic_code);
1986 writew(0, ofsAddr + HostStat);
1987 moxafunc(ofsAddr, FC_DisableCH, Magic_code);
1988 }
1989
1990 long MoxaPortGetMaxBaud(int port)
1991 {
1992 if ((moxa_boards[port / MAX_PORTS_PER_BOARD].boardType == MOXA_BOARD_C320_ISA) ||
1993 (moxa_boards[port / MAX_PORTS_PER_BOARD].boardType == MOXA_BOARD_C320_PCI))
1994 return (460800L);
1995 else
1996 return (921600L);
1997 }
1998
1999
2000 long MoxaPortSetBaud(int port, long baud)
2001 {
2002 void __iomem *ofsAddr;
2003 long max, clock;
2004 unsigned int val;
2005
2006 if ((baud < 50L) || ((max = MoxaPortGetMaxBaud(port)) == 0))
2007 return (0);
2008 ofsAddr = moxa_ports[port].tableAddr;
2009 if (baud > max)
2010 baud = max;
2011 if (max == 38400L)
2012 clock = 614400L; /* for 9.8304 Mhz : max. 38400 bps */
2013 else if (max == 57600L)
2014 clock = 691200L; /* for 11.0592 Mhz : max. 57600 bps */
2015 else
2016 clock = 921600L; /* for 14.7456 Mhz : max. 115200 bps */
2017 val = clock / baud;
2018 moxafunc(ofsAddr, FC_SetBaud, val);
2019 baud = clock / val;
2020 moxa_ports[port].curBaud = baud;
2021 return (baud);
2022 }
2023
2024 int MoxaPortSetTermio(int port, struct ktermios *termio, speed_t baud)
2025 {
2026 void __iomem *ofsAddr;
2027 tcflag_t cflag;
2028 tcflag_t mode = 0;
2029
2030 if (moxa_ports[port].chkPort == 0 || termio == 0)
2031 return (-1);
2032 ofsAddr = moxa_ports[port].tableAddr;
2033 cflag = termio->c_cflag; /* termio->c_cflag */
2034
2035 mode = termio->c_cflag & CSIZE;
2036 if (mode == CS5)
2037 mode = MX_CS5;
2038 else if (mode == CS6)
2039 mode = MX_CS6;
2040 else if (mode == CS7)
2041 mode = MX_CS7;
2042 else if (mode == CS8)
2043 mode = MX_CS8;
2044
2045 if (termio->c_cflag & CSTOPB) {
2046 if (mode == MX_CS5)
2047 mode |= MX_STOP15;
2048 else
2049 mode |= MX_STOP2;
2050 } else
2051 mode |= MX_STOP1;
2052
2053 if (termio->c_cflag & PARENB) {
2054 if (termio->c_cflag & PARODD)
2055 mode |= MX_PARODD;
2056 else
2057 mode |= MX_PAREVEN;
2058 } else
2059 mode |= MX_PARNONE;
2060
2061 moxafunc(ofsAddr, FC_SetDataMode, (ushort) mode);
2062
2063 if ((moxa_boards[port / MAX_PORTS_PER_BOARD].boardType == MOXA_BOARD_C320_ISA) ||
2064 (moxa_boards[port / MAX_PORTS_PER_BOARD].boardType == MOXA_BOARD_C320_PCI)) {
2065 if (baud >= 921600L)
2066 return (-1);
2067 }
2068 MoxaPortSetBaud(port, baud);
2069
2070 if (termio->c_iflag & (IXON | IXOFF | IXANY)) {
2071 writeb(termio->c_cc[VSTART], ofsAddr + FuncArg);
2072 writeb(termio->c_cc[VSTOP], ofsAddr + FuncArg1);
2073 writeb(FC_SetXonXoff, ofsAddr + FuncCode);
2074 moxa_wait_finish(ofsAddr);
2075
2076 }
2077 return (0);
2078 }
2079
2080 int MoxaPortGetLineOut(int port, int *dtrState, int *rtsState)
2081 {
2082
2083 if (!MoxaPortIsValid(port))
2084 return (-1);
2085 if (dtrState) {
2086 if (moxa_ports[port].lineCtrl & DTR_ON)
2087 *dtrState = 1;
2088 else
2089 *dtrState = 0;
2090 }
2091 if (rtsState) {
2092 if (moxa_ports[port].lineCtrl & RTS_ON)
2093 *rtsState = 1;
2094 else
2095 *rtsState = 0;
2096 }
2097 return (0);
2098 }
2099
2100 void MoxaPortLineCtrl(int port, int dtr, int rts)
2101 {
2102 void __iomem *ofsAddr;
2103 int mode;
2104
2105 ofsAddr = moxa_ports[port].tableAddr;
2106 mode = 0;
2107 if (dtr)
2108 mode |= DTR_ON;
2109 if (rts)
2110 mode |= RTS_ON;
2111 moxa_ports[port].lineCtrl = mode;
2112 moxafunc(ofsAddr, FC_LineControl, mode);
2113 }
2114
2115 void MoxaPortFlowCtrl(int port, int rts, int cts, int txflow, int rxflow, int txany)
2116 {
2117 void __iomem *ofsAddr;
2118 int mode;
2119
2120 ofsAddr = moxa_ports[port].tableAddr;
2121 mode = 0;
2122 if (rts)
2123 mode |= RTS_FlowCtl;
2124 if (cts)
2125 mode |= CTS_FlowCtl;
2126 if (txflow)
2127 mode |= Tx_FlowCtl;
2128 if (rxflow)
2129 mode |= Rx_FlowCtl;
2130 if (txany)
2131 mode |= IXM_IXANY;
2132 moxafunc(ofsAddr, FC_SetFlowCtl, mode);
2133 }
2134
2135 int MoxaPortLineStatus(int port)
2136 {
2137 void __iomem *ofsAddr;
2138 int val;
2139
2140 ofsAddr = moxa_ports[port].tableAddr;
2141 if ((moxa_boards[port / MAX_PORTS_PER_BOARD].boardType == MOXA_BOARD_C320_ISA) ||
2142 (moxa_boards[port / MAX_PORTS_PER_BOARD].boardType == MOXA_BOARD_C320_PCI)) {
2143 moxafunc(ofsAddr, FC_LineStatus, 0);
2144 val = readw(ofsAddr + FuncArg);
2145 } else {
2146 val = readw(ofsAddr + FlagStat) >> 4;
2147 }
2148 val &= 0x0B;
2149 if (val & 8) {
2150 val |= 4;
2151 if ((moxa_ports[port].DCDState & DCD_oldstate) == 0)
2152 moxa_ports[port].DCDState = (DCD_oldstate | DCD_changed);
2153 } else {
2154 if (moxa_ports[port].DCDState & DCD_oldstate)
2155 moxa_ports[port].DCDState = DCD_changed;
2156 }
2157 val &= 7;
2158 return (val);
2159 }
2160
2161 int MoxaPortDCDChange(int port)
2162 {
2163 int n;
2164
2165 if (moxa_ports[port].chkPort == 0)
2166 return (0);
2167 n = moxa_ports[port].DCDState;
2168 moxa_ports[port].DCDState &= ~DCD_changed;
2169 n &= DCD_changed;
2170 return (n);
2171 }
2172
2173 int MoxaPortDCDON(int port)
2174 {
2175 int n;
2176
2177 if (moxa_ports[port].chkPort == 0)
2178 return (0);
2179 if (moxa_ports[port].DCDState & DCD_oldstate)
2180 n = 1;
2181 else
2182 n = 0;
2183 return (n);
2184 }
2185
2186 int MoxaPortWriteData(int port, unsigned char * buffer, int len)
2187 {
2188 int c, total, i;
2189 ushort tail;
2190 int cnt;
2191 ushort head, tx_mask, spage, epage;
2192 ushort pageno, pageofs, bufhead;
2193 void __iomem *baseAddr, *ofsAddr, *ofs;
2194
2195 ofsAddr = moxa_ports[port].tableAddr;
2196 baseAddr = moxa_boards[port / MAX_PORTS_PER_BOARD].basemem;
2197 tx_mask = readw(ofsAddr + TX_mask);
2198 spage = readw(ofsAddr + Page_txb);
2199 epage = readw(ofsAddr + EndPage_txb);
2200 tail = readw(ofsAddr + TXwptr);
2201 head = readw(ofsAddr + TXrptr);
2202 c = (head > tail) ? (head - tail - 1)
2203 : (head - tail + tx_mask);
2204 if (c > len)
2205 c = len;
2206 moxaLog.txcnt[port] += c;
2207 total = c;
2208 if (spage == epage) {
2209 bufhead = readw(ofsAddr + Ofs_txb);
2210 writew(spage, baseAddr + Control_reg);
2211 while (c > 0) {
2212 if (head > tail)
2213 len = head - tail - 1;
2214 else
2215 len = tx_mask + 1 - tail;
2216 len = (c > len) ? len : c;
2217 ofs = baseAddr + DynPage_addr + bufhead + tail;
2218 for (i = 0; i < len; i++)
2219 writeb(*buffer++, ofs + i);
2220 tail = (tail + len) & tx_mask;
2221 c -= len;
2222 }
2223 writew(tail, ofsAddr + TXwptr);
2224 } else {
2225 len = c;
2226 pageno = spage + (tail >> 13);
2227 pageofs = tail & Page_mask;
2228 do {
2229 cnt = Page_size - pageofs;
2230 if (cnt > c)
2231 cnt = c;
2232 c -= cnt;
2233 writeb(pageno, baseAddr + Control_reg);
2234 ofs = baseAddr + DynPage_addr + pageofs;
2235 for (i = 0; i < cnt; i++)
2236 writeb(*buffer++, ofs + i);
2237 if (c == 0) {
2238 writew((tail + len) & tx_mask, ofsAddr + TXwptr);
2239 break;
2240 }
2241 if (++pageno == epage)
2242 pageno = spage;
2243 pageofs = 0;
2244 } while (1);
2245 }
2246 writeb(1, ofsAddr + CD180TXirq); /* start to send */
2247 return (total);
2248 }
2249
2250 int MoxaPortReadData(int port, struct tty_struct *tty)
2251 {
2252 register ushort head, pageofs;
2253 int i, count, cnt, len, total, remain;
2254 ushort tail, rx_mask, spage, epage;
2255 ushort pageno, bufhead;
2256 void __iomem *baseAddr, *ofsAddr, *ofs;
2257
2258 ofsAddr = moxa_ports[port].tableAddr;
2259 baseAddr = moxa_boards[port / MAX_PORTS_PER_BOARD].basemem;
2260 head = readw(ofsAddr + RXrptr);
2261 tail = readw(ofsAddr + RXwptr);
2262 rx_mask = readw(ofsAddr + RX_mask);
2263 spage = readw(ofsAddr + Page_rxb);
2264 epage = readw(ofsAddr + EndPage_rxb);
2265 count = (tail >= head) ? (tail - head)
2266 : (tail - head + rx_mask + 1);
2267 if (count == 0)
2268 return 0;
2269
2270 total = count;
2271 remain = count - total;
2272 moxaLog.rxcnt[port] += total;
2273 count = total;
2274 if (spage == epage) {
2275 bufhead = readw(ofsAddr + Ofs_rxb);
2276 writew(spage, baseAddr + Control_reg);
2277 while (count > 0) {
2278 if (tail >= head)
2279 len = tail - head;
2280 else
2281 len = rx_mask + 1 - head;
2282 len = (count > len) ? len : count;
2283 ofs = baseAddr + DynPage_addr + bufhead + head;
2284 for (i = 0; i < len; i++)
2285 tty_insert_flip_char(tty, readb(ofs + i), TTY_NORMAL);
2286 head = (head + len) & rx_mask;
2287 count -= len;
2288 }
2289 writew(head, ofsAddr + RXrptr);
2290 } else {
2291 len = count;
2292 pageno = spage + (head >> 13);
2293 pageofs = head & Page_mask;
2294 do {
2295 cnt = Page_size - pageofs;
2296 if (cnt > count)
2297 cnt = count;
2298 count -= cnt;
2299 writew(pageno, baseAddr + Control_reg);
2300 ofs = baseAddr + DynPage_addr + pageofs;
2301 for (i = 0; i < cnt; i++)
2302 tty_insert_flip_char(tty, readb(ofs + i), TTY_NORMAL);
2303 if (count == 0) {
2304 writew((head + len) & rx_mask, ofsAddr + RXrptr);
2305 break;
2306 }
2307 if (++pageno == epage)
2308 pageno = spage;
2309 pageofs = 0;
2310 } while (1);
2311 }
2312 if ((readb(ofsAddr + FlagStat) & Xoff_state) && (remain < LowWater)) {
2313 moxaLowWaterChk = 1;
2314 moxa_ports[port].lowChkFlag = 1;
2315 }
2316 return (total);
2317 }
2318
2319
2320 int MoxaPortTxQueue(int port)
2321 {
2322 void __iomem *ofsAddr;
2323 ushort rptr, wptr, mask;
2324 int len;
2325
2326 ofsAddr = moxa_ports[port].tableAddr;
2327 rptr = readw(ofsAddr + TXrptr);
2328 wptr = readw(ofsAddr + TXwptr);
2329 mask = readw(ofsAddr + TX_mask);
2330 len = (wptr - rptr) & mask;
2331 return (len);
2332 }
2333
2334 int MoxaPortTxFree(int port)
2335 {
2336 void __iomem *ofsAddr;
2337 ushort rptr, wptr, mask;
2338 int len;
2339
2340 ofsAddr = moxa_ports[port].tableAddr;
2341 rptr = readw(ofsAddr + TXrptr);
2342 wptr = readw(ofsAddr + TXwptr);
2343 mask = readw(ofsAddr + TX_mask);
2344 len = mask - ((wptr - rptr) & mask);
2345 return (len);
2346 }
2347
2348 int MoxaPortRxQueue(int port)
2349 {
2350 void __iomem *ofsAddr;
2351 ushort rptr, wptr, mask;
2352 int len;
2353
2354 ofsAddr = moxa_ports[port].tableAddr;
2355 rptr = readw(ofsAddr + RXrptr);
2356 wptr = readw(ofsAddr + RXwptr);
2357 mask = readw(ofsAddr + RX_mask);
2358 len = (wptr - rptr) & mask;
2359 return (len);
2360 }
2361
2362
2363 void MoxaPortTxDisable(int port)
2364 {
2365 void __iomem *ofsAddr;
2366
2367 ofsAddr = moxa_ports[port].tableAddr;
2368 moxafunc(ofsAddr, FC_SetXoffState, Magic_code);
2369 }
2370
2371 void MoxaPortTxEnable(int port)
2372 {
2373 void __iomem *ofsAddr;
2374
2375 ofsAddr = moxa_ports[port].tableAddr;
2376 moxafunc(ofsAddr, FC_SetXonState, Magic_code);
2377 }
2378
2379
2380 int MoxaPortResetBrkCnt(int port)
2381 {
2382 ushort cnt;
2383 cnt = moxa_ports[port].breakCnt;
2384 moxa_ports[port].breakCnt = 0;
2385 return (cnt);
2386 }
2387
2388
2389 void MoxaPortSendBreak(int port, int ms100)
2390 {
2391 void __iomem *ofsAddr;
2392
2393 ofsAddr = moxa_ports[port].tableAddr;
2394 if (ms100) {
2395 moxafunc(ofsAddr, FC_SendBreak, Magic_code);
2396 msleep(ms100 * 10);
2397 } else {
2398 moxafunc(ofsAddr, FC_SendBreak, Magic_code);
2399 msleep(250);
2400 }
2401 moxafunc(ofsAddr, FC_StopBreak, Magic_code);
2402 }
2403
2404 static int moxa_get_serial_info(struct moxa_port *info,
2405 struct serial_struct __user *retinfo)
2406 {
2407 struct serial_struct tmp;
2408
2409 memset(&tmp, 0, sizeof(tmp));
2410 tmp.type = info->type;
2411 tmp.line = info->port;
2412 tmp.port = 0;
2413 tmp.irq = 0;
2414 tmp.flags = info->asyncflags;
2415 tmp.baud_base = 921600;
2416 tmp.close_delay = info->close_delay;
2417 tmp.closing_wait = info->closing_wait;
2418 tmp.custom_divisor = 0;
2419 tmp.hub6 = 0;
2420 if(copy_to_user(retinfo, &tmp, sizeof(*retinfo)))
2421 return -EFAULT;
2422 return (0);
2423 }
2424
2425
2426 static int moxa_set_serial_info(struct moxa_port *info,
2427 struct serial_struct __user *new_info)
2428 {
2429 struct serial_struct new_serial;
2430
2431 if(copy_from_user(&new_serial, new_info, sizeof(new_serial)))
2432 return -EFAULT;
2433
2434 if ((new_serial.irq != 0) ||
2435 (new_serial.port != 0) ||
2436 // (new_serial.type != info->type) ||
2437 (new_serial.custom_divisor != 0) ||
2438 (new_serial.baud_base != 921600))
2439 return (-EPERM);
2440
2441 if (!capable(CAP_SYS_ADMIN)) {
2442 if (((new_serial.flags & ~ASYNC_USR_MASK) !=
2443 (info->asyncflags & ~ASYNC_USR_MASK)))
2444 return (-EPERM);
2445 } else {
2446 info->close_delay = new_serial.close_delay * HZ / 100;
2447 info->closing_wait = new_serial.closing_wait * HZ / 100;
2448 }
2449
2450 new_serial.flags = (new_serial.flags & ~ASYNC_FLAGS);
2451 new_serial.flags |= (info->asyncflags & ASYNC_FLAGS);
2452
2453 if (new_serial.type == PORT_16550A) {
2454 MoxaSetFifo(info->port, 1);
2455 } else {
2456 MoxaSetFifo(info->port, 0);
2457 }
2458
2459 info->type = new_serial.type;
2460 return (0);
2461 }
2462
2463
2464
2465 /*****************************************************************************
2466 * Static local functions: *
2467 *****************************************************************************/
2468 static void moxafunc(void __iomem *ofsAddr, int cmd, ushort arg)
2469 {
2470
2471 writew(arg, ofsAddr + FuncArg);
2472 writew(cmd, ofsAddr + FuncCode);
2473 moxa_wait_finish(ofsAddr);
2474 }
2475
2476 static void moxa_wait_finish(void __iomem *ofsAddr)
2477 {
2478 unsigned long i, j;
2479
2480 i = jiffies;
2481 while (readw(ofsAddr + FuncCode) != 0) {
2482 j = jiffies;
2483 if ((j - i) > moxaFuncTout) {
2484 return;
2485 }
2486 }
2487 }
2488
2489 static void moxa_low_water_check(void __iomem *ofsAddr)
2490 {
2491 int len;
2492 ushort rptr, wptr, mask;
2493
2494 if (readb(ofsAddr + FlagStat) & Xoff_state) {
2495 rptr = readw(ofsAddr + RXrptr);
2496 wptr = readw(ofsAddr + RXwptr);
2497 mask = readw(ofsAddr + RX_mask);
2498 len = (wptr - rptr) & mask;
2499 if (len <= Low_water)
2500 moxafunc(ofsAddr, FC_SendXon, 0);
2501 }
2502 }
2503
2504 static int moxaloadbios(int cardno, unsigned char __user *tmp, int len)
2505 {
2506 void __iomem *baseAddr;
2507 int i;
2508
2509 if(len < 0 || len > sizeof(moxaBuff))
2510 return -EINVAL;
2511 if(copy_from_user(moxaBuff, tmp, len))
2512 return -EFAULT;
2513 baseAddr = moxa_boards[cardno].basemem;
2514 writeb(HW_reset, baseAddr + Control_reg); /* reset */
2515 msleep(10);
2516 for (i = 0; i < 4096; i++)
2517 writeb(0, baseAddr + i); /* clear fix page */
2518 for (i = 0; i < len; i++)
2519 writeb(moxaBuff[i], baseAddr + i); /* download BIOS */
2520 writeb(0, baseAddr + Control_reg); /* restart */
2521 return (0);
2522 }
2523
2524 static int moxafindcard(int cardno)
2525 {
2526 void __iomem *baseAddr;
2527 ushort tmp;
2528
2529 baseAddr = moxa_boards[cardno].basemem;
2530 switch (moxa_boards[cardno].boardType) {
2531 case MOXA_BOARD_C218_ISA:
2532 case MOXA_BOARD_C218_PCI:
2533 if ((tmp = readw(baseAddr + C218_key)) != C218_KeyCode) {
2534 return (-1);
2535 }
2536 break;
2537 case MOXA_BOARD_CP204J:
2538 if ((tmp = readw(baseAddr + C218_key)) != CP204J_KeyCode) {
2539 return (-1);
2540 }
2541 break;
2542 default:
2543 if ((tmp = readw(baseAddr + C320_key)) != C320_KeyCode) {
2544 return (-1);
2545 }
2546 if ((tmp = readw(baseAddr + C320_status)) != STS_init) {
2547 return (-2);
2548 }
2549 }
2550 return (0);
2551 }
2552
2553 static int moxaload320b(int cardno, unsigned char __user *tmp, int len)
2554 {
2555 void __iomem *baseAddr;
2556 int i;
2557
2558 if(len < 0 || len > sizeof(moxaBuff))
2559 return -EINVAL;
2560 if(copy_from_user(moxaBuff, tmp, len))
2561 return -EFAULT;
2562 baseAddr = moxa_boards[cardno].basemem;
2563 writew(len - 7168 - 2, baseAddr + C320bapi_len);
2564 writeb(1, baseAddr + Control_reg); /* Select Page 1 */
2565 for (i = 0; i < 7168; i++)
2566 writeb(moxaBuff[i], baseAddr + DynPage_addr + i);
2567 writeb(2, baseAddr + Control_reg); /* Select Page 2 */
2568 for (i = 0; i < (len - 7168); i++)
2569 writeb(moxaBuff[i + 7168], baseAddr + DynPage_addr + i);
2570 return (0);
2571 }
2572
2573 static int moxaloadcode(int cardno, unsigned char __user *tmp, int len)
2574 {
2575 void __iomem *baseAddr, *ofsAddr;
2576 int retval, port, i;
2577
2578 if(len < 0 || len > sizeof(moxaBuff))
2579 return -EINVAL;
2580 if(copy_from_user(moxaBuff, tmp, len))
2581 return -EFAULT;
2582 baseAddr = moxa_boards[cardno].basemem;
2583 switch (moxa_boards[cardno].boardType) {
2584 case MOXA_BOARD_C218_ISA:
2585 case MOXA_BOARD_C218_PCI:
2586 case MOXA_BOARD_CP204J:
2587 retval = moxaloadc218(cardno, baseAddr, len);
2588 if (retval)
2589 return (retval);
2590 port = cardno * MAX_PORTS_PER_BOARD;
2591 for (i = 0; i < moxa_boards[cardno].numPorts; i++, port++) {
2592 struct moxa_port *p = &moxa_ports[port];
2593
2594 p->chkPort = 1;
2595 p->curBaud = 9600L;
2596 p->DCDState = 0;
2597 p->tableAddr = baseAddr + Extern_table + Extern_size * i;
2598 ofsAddr = p->tableAddr;
2599 writew(C218rx_mask, ofsAddr + RX_mask);
2600 writew(C218tx_mask, ofsAddr + TX_mask);
2601 writew(C218rx_spage + i * C218buf_pageno, ofsAddr + Page_rxb);
2602 writew(readw(ofsAddr + Page_rxb) + C218rx_pageno, ofsAddr + EndPage_rxb);
2603
2604 writew(C218tx_spage + i * C218buf_pageno, ofsAddr + Page_txb);
2605 writew(readw(ofsAddr + Page_txb) + C218tx_pageno, ofsAddr + EndPage_txb);
2606
2607 }
2608 break;
2609 default:
2610 retval = moxaloadc320(cardno, baseAddr, len,
2611 &moxa_boards[cardno].numPorts);
2612 if (retval)
2613 return (retval);
2614 port = cardno * MAX_PORTS_PER_BOARD;
2615 for (i = 0; i < moxa_boards[cardno].numPorts; i++, port++) {
2616 struct moxa_port *p = &moxa_ports[port];
2617
2618 p->chkPort = 1;
2619 p->curBaud = 9600L;
2620 p->DCDState = 0;
2621 p->tableAddr = baseAddr + Extern_table + Extern_size * i;
2622 ofsAddr = p->tableAddr;
2623 if (moxa_boards[cardno].numPorts == 8) {
2624 writew(C320p8rx_mask, ofsAddr + RX_mask);
2625 writew(C320p8tx_mask, ofsAddr + TX_mask);
2626 writew(C320p8rx_spage + i * C320p8buf_pgno, ofsAddr + Page_rxb);
2627 writew(readw(ofsAddr + Page_rxb) + C320p8rx_pgno, ofsAddr + EndPage_rxb);
2628 writew(C320p8tx_spage + i * C320p8buf_pgno, ofsAddr + Page_txb);
2629 writew(readw(ofsAddr + Page_txb) + C320p8tx_pgno, ofsAddr + EndPage_txb);
2630
2631 } else if (moxa_boards[cardno].numPorts == 16) {
2632 writew(C320p16rx_mask, ofsAddr + RX_mask);
2633 writew(C320p16tx_mask, ofsAddr + TX_mask);
2634 writew(C320p16rx_spage + i * C320p16buf_pgno, ofsAddr + Page_rxb);
2635 writew(readw(ofsAddr + Page_rxb) + C320p16rx_pgno, ofsAddr + EndPage_rxb);
2636 writew(C320p16tx_spage + i * C320p16buf_pgno, ofsAddr + Page_txb);
2637 writew(readw(ofsAddr + Page_txb) + C320p16tx_pgno, ofsAddr + EndPage_txb);
2638
2639 } else if (moxa_boards[cardno].numPorts == 24) {
2640 writew(C320p24rx_mask, ofsAddr + RX_mask);
2641 writew(C320p24tx_mask, ofsAddr + TX_mask);
2642 writew(C320p24rx_spage + i * C320p24buf_pgno, ofsAddr + Page_rxb);
2643 writew(readw(ofsAddr + Page_rxb) + C320p24rx_pgno, ofsAddr + EndPage_rxb);
2644 writew(C320p24tx_spage + i * C320p24buf_pgno, ofsAddr + Page_txb);
2645 writew(readw(ofsAddr + Page_txb), ofsAddr + EndPage_txb);
2646 } else if (moxa_boards[cardno].numPorts == 32) {
2647 writew(C320p32rx_mask, ofsAddr + RX_mask);
2648 writew(C320p32tx_mask, ofsAddr + TX_mask);
2649 writew(C320p32tx_ofs, ofsAddr + Ofs_txb);
2650 writew(C320p32rx_spage + i * C320p32buf_pgno, ofsAddr + Page_rxb);
2651 writew(readb(ofsAddr + Page_rxb), ofsAddr + EndPage_rxb);
2652 writew(C320p32tx_spage + i * C320p32buf_pgno, ofsAddr + Page_txb);
2653 writew(readw(ofsAddr + Page_txb), ofsAddr + EndPage_txb);
2654 }
2655 }
2656 break;
2657 }
2658 moxa_boards[cardno].loadstat = 1;
2659 return (0);
2660 }
2661
2662 static int moxaloadc218(int cardno, void __iomem *baseAddr, int len)
2663 {
2664 char retry;
2665 int i, j, len1, len2;
2666 ushort usum, *ptr, keycode;
2667
2668 if (moxa_boards[cardno].boardType == MOXA_BOARD_CP204J)
2669 keycode = CP204J_KeyCode;
2670 else
2671 keycode = C218_KeyCode;
2672 usum = 0;
2673 len1 = len >> 1;
2674 ptr = (ushort *) moxaBuff;
2675 for (i = 0; i < len1; i++)
2676 usum += le16_to_cpu(*(ptr + i));
2677 retry = 0;
2678 do {
2679 len1 = len >> 1;
2680 j = 0;
2681 while (len1) {
2682 len2 = (len1 > 2048) ? 2048 : len1;
2683 len1 -= len2;
2684 for (i = 0; i < len2 << 1; i++)
2685 writeb(moxaBuff[i + j], baseAddr + C218_LoadBuf + i);
2686 j += i;
2687
2688 writew(len2, baseAddr + C218DLoad_len);
2689 writew(0, baseAddr + C218_key);
2690 for (i = 0; i < 100; i++) {
2691 if (readw(baseAddr + C218_key) == keycode)
2692 break;
2693 msleep(10);
2694 }
2695 if (readw(baseAddr + C218_key) != keycode) {
2696 return (-1);
2697 }
2698 }
2699 writew(0, baseAddr + C218DLoad_len);
2700 writew(usum, baseAddr + C218check_sum);
2701 writew(0, baseAddr + C218_key);
2702 for (i = 0; i < 100; i++) {
2703 if (readw(baseAddr + C218_key) == keycode)
2704 break;
2705 msleep(10);
2706 }
2707 retry++;
2708 } while ((readb(baseAddr + C218chksum_ok) != 1) && (retry < 3));
2709 if (readb(baseAddr + C218chksum_ok) != 1) {
2710 return (-1);
2711 }
2712 writew(0, baseAddr + C218_key);
2713 for (i = 0; i < 100; i++) {
2714 if (readw(baseAddr + Magic_no) == Magic_code)
2715 break;
2716 msleep(10);
2717 }
2718 if (readw(baseAddr + Magic_no) != Magic_code) {
2719 return (-1);
2720 }
2721 writew(1, baseAddr + Disable_IRQ);
2722 writew(0, baseAddr + Magic_no);
2723 for (i = 0; i < 100; i++) {
2724 if (readw(baseAddr + Magic_no) == Magic_code)
2725 break;
2726 msleep(10);
2727 }
2728 if (readw(baseAddr + Magic_no) != Magic_code) {
2729 return (-1);
2730 }
2731 moxaCard = 1;
2732 moxa_boards[cardno].intNdx = baseAddr + IRQindex;
2733 moxa_boards[cardno].intPend = baseAddr + IRQpending;
2734 moxa_boards[cardno].intTable = baseAddr + IRQtable;
2735 return (0);
2736 }
2737
2738 static int moxaloadc320(int cardno, void __iomem *baseAddr, int len, int *numPorts)
2739 {
2740 ushort usum;
2741 int i, j, wlen, len2, retry;
2742 ushort *uptr;
2743
2744 usum = 0;
2745 wlen = len >> 1;
2746 uptr = (ushort *) moxaBuff;
2747 for (i = 0; i < wlen; i++)
2748 usum += le16_to_cpu(uptr[i]);
2749 retry = 0;
2750 j = 0;
2751 do {
2752 while (wlen) {
2753 if (wlen > 2048)
2754 len2 = 2048;
2755 else
2756 len2 = wlen;
2757 wlen -= len2;
2758 len2 <<= 1;
2759 for (i = 0; i < len2; i++)
2760 writeb(moxaBuff[j + i], baseAddr + C320_LoadBuf + i);
2761 len2 >>= 1;
2762 j += i;
2763 writew(len2, baseAddr + C320DLoad_len);
2764 writew(0, baseAddr + C320_key);
2765 for (i = 0; i < 10; i++) {
2766 if (readw(baseAddr + C320_key) == C320_KeyCode)
2767 break;
2768 msleep(10);
2769 }
2770 if (readw(baseAddr + C320_key) != C320_KeyCode)
2771 return (-1);
2772 }
2773 writew(0, baseAddr + C320DLoad_len);
2774 writew(usum, baseAddr + C320check_sum);
2775 writew(0, baseAddr + C320_key);
2776 for (i = 0; i < 10; i++) {
2777 if (readw(baseAddr + C320_key) == C320_KeyCode)
2778 break;
2779 msleep(10);
2780 }
2781 retry++;
2782 } while ((readb(baseAddr + C320chksum_ok) != 1) && (retry < 3));
2783 if (readb(baseAddr + C320chksum_ok) != 1)
2784 return (-1);
2785 writew(0, baseAddr + C320_key);
2786 for (i = 0; i < 600; i++) {
2787 if (readw(baseAddr + Magic_no) == Magic_code)
2788 break;
2789 msleep(10);
2790 }
2791 if (readw(baseAddr + Magic_no) != Magic_code)
2792 return (-100);
2793
2794 if (moxa_boards[cardno].busType == MOXA_BUS_TYPE_PCI) { /* ASIC board */
2795 writew(0x3800, baseAddr + TMS320_PORT1);
2796 writew(0x3900, baseAddr + TMS320_PORT2);
2797 writew(28499, baseAddr + TMS320_CLOCK);
2798 } else {
2799 writew(0x3200, baseAddr + TMS320_PORT1);
2800 writew(0x3400, baseAddr + TMS320_PORT2);
2801 writew(19999, baseAddr + TMS320_CLOCK);
2802 }
2803 writew(1, baseAddr + Disable_IRQ);
2804 writew(0, baseAddr + Magic_no);
2805 for (i = 0; i < 500; i++) {
2806 if (readw(baseAddr + Magic_no) == Magic_code)
2807 break;
2808 msleep(10);
2809 }
2810 if (readw(baseAddr + Magic_no) != Magic_code)
2811 return (-102);
2812
2813 j = readw(baseAddr + Module_cnt);
2814 if (j <= 0)
2815 return (-101);
2816 *numPorts = j * 8;
2817 writew(j, baseAddr + Module_no);
2818 writew(0, baseAddr + Magic_no);
2819 for (i = 0; i < 600; i++) {
2820 if (readw(baseAddr + Magic_no) == Magic_code)
2821 break;
2822 msleep(10);
2823 }
2824 if (readw(baseAddr + Magic_no) != Magic_code)
2825 return (-102);
2826 moxaCard = 1;
2827 moxa_boards[cardno].intNdx = baseAddr + IRQindex;
2828 moxa_boards[cardno].intPend = baseAddr + IRQpending;
2829 moxa_boards[cardno].intTable = baseAddr + IRQtable;
2830 return (0);
2831 }
2832
2833 static void MoxaSetFifo(int port, int enable)
2834 {
2835 void __iomem *ofsAddr = moxa_ports[port].tableAddr;
2836
2837 if (!enable) {
2838 moxafunc(ofsAddr, FC_SetRxFIFOTrig, 0);
2839 moxafunc(ofsAddr, FC_SetTxFIFOCnt, 1);
2840 } else {
2841 moxafunc(ofsAddr, FC_SetRxFIFOTrig, 3);
2842 moxafunc(ofsAddr, FC_SetTxFIFOCnt, 16);
2843 }
2844 }
Linux 2.6 libata-dev (mirror)