Markers - define non optimized marker
[linux-2.6/libata-dev.git] / drivers / ata / ahci.c
blob97f83fb2ee2eef25af748297cb474c859ba6545e
1 /*
2 * ahci.c - AHCI SATA support
4 * Maintained by: Jeff Garzik <jgarzik@pobox.com>
5 * Please ALWAYS copy linux-ide@vger.kernel.org
6 * on emails.
8 * Copyright 2004-2005 Red Hat, Inc.
11 * This program is free software; you can redistribute it and/or modify
12 * it under the terms of the GNU General Public License as published by
13 * the Free Software Foundation; either version 2, or (at your option)
14 * any later version.
16 * This program is distributed in the hope that it will be useful,
17 * but WITHOUT ANY WARRANTY; without even the implied warranty of
18 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
19 * GNU General Public License for more details.
21 * You should have received a copy of the GNU General Public License
22 * along with this program; see the file COPYING. If not, write to
23 * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
26 * libata documentation is available via 'make {ps|pdf}docs',
27 * as Documentation/DocBook/libata.*
29 * AHCI hardware documentation:
30 * http://www.intel.com/technology/serialata/pdf/rev1_0.pdf
31 * http://www.intel.com/technology/serialata/pdf/rev1_1.pdf
35 #include <linux/kernel.h>
36 #include <linux/module.h>
37 #include <linux/pci.h>
38 #include <linux/init.h>
39 #include <linux/blkdev.h>
40 #include <linux/delay.h>
41 #include <linux/interrupt.h>
42 #include <linux/dma-mapping.h>
43 #include <linux/device.h>
44 #include <linux/dmi.h>
45 #include <scsi/scsi_host.h>
46 #include <scsi/scsi_cmnd.h>
47 #include <linux/libata.h>
49 #define DRV_NAME "ahci"
50 #define DRV_VERSION "3.0"
52 static int ahci_skip_host_reset;
53 module_param_named(skip_host_reset, ahci_skip_host_reset, int, 0444);
54 MODULE_PARM_DESC(skip_host_reset, "skip global host reset (0=don't skip, 1=skip)");
56 static int ahci_enable_alpm(struct ata_port *ap,
57 enum link_pm policy);
58 static void ahci_disable_alpm(struct ata_port *ap);
60 enum {
61 AHCI_PCI_BAR = 5,
62 AHCI_MAX_PORTS = 32,
63 AHCI_MAX_SG = 168, /* hardware max is 64K */
64 AHCI_DMA_BOUNDARY = 0xffffffff,
65 AHCI_MAX_CMDS = 32,
66 AHCI_CMD_SZ = 32,
67 AHCI_CMD_SLOT_SZ = AHCI_MAX_CMDS * AHCI_CMD_SZ,
68 AHCI_RX_FIS_SZ = 256,
69 AHCI_CMD_TBL_CDB = 0x40,
70 AHCI_CMD_TBL_HDR_SZ = 0x80,
71 AHCI_CMD_TBL_SZ = AHCI_CMD_TBL_HDR_SZ + (AHCI_MAX_SG * 16),
72 AHCI_CMD_TBL_AR_SZ = AHCI_CMD_TBL_SZ * AHCI_MAX_CMDS,
73 AHCI_PORT_PRIV_DMA_SZ = AHCI_CMD_SLOT_SZ + AHCI_CMD_TBL_AR_SZ +
74 AHCI_RX_FIS_SZ,
75 AHCI_IRQ_ON_SG = (1 << 31),
76 AHCI_CMD_ATAPI = (1 << 5),
77 AHCI_CMD_WRITE = (1 << 6),
78 AHCI_CMD_PREFETCH = (1 << 7),
79 AHCI_CMD_RESET = (1 << 8),
80 AHCI_CMD_CLR_BUSY = (1 << 10),
82 RX_FIS_D2H_REG = 0x40, /* offset of D2H Register FIS data */
83 RX_FIS_SDB = 0x58, /* offset of SDB FIS data */
84 RX_FIS_UNK = 0x60, /* offset of Unknown FIS data */
86 board_ahci = 0,
87 board_ahci_vt8251 = 1,
88 board_ahci_ign_iferr = 2,
89 board_ahci_sb600 = 3,
90 board_ahci_mv = 4,
91 board_ahci_sb700 = 5,
93 /* global controller registers */
94 HOST_CAP = 0x00, /* host capabilities */
95 HOST_CTL = 0x04, /* global host control */
96 HOST_IRQ_STAT = 0x08, /* interrupt status */
97 HOST_PORTS_IMPL = 0x0c, /* bitmap of implemented ports */
98 HOST_VERSION = 0x10, /* AHCI spec. version compliancy */
100 /* HOST_CTL bits */
101 HOST_RESET = (1 << 0), /* reset controller; self-clear */
102 HOST_IRQ_EN = (1 << 1), /* global IRQ enable */
103 HOST_AHCI_EN = (1 << 31), /* AHCI enabled */
105 /* HOST_CAP bits */
106 HOST_CAP_SSC = (1 << 14), /* Slumber capable */
107 HOST_CAP_PMP = (1 << 17), /* Port Multiplier support */
108 HOST_CAP_CLO = (1 << 24), /* Command List Override support */
109 HOST_CAP_ALPM = (1 << 26), /* Aggressive Link PM support */
110 HOST_CAP_SSS = (1 << 27), /* Staggered Spin-up */
111 HOST_CAP_SNTF = (1 << 29), /* SNotification register */
112 HOST_CAP_NCQ = (1 << 30), /* Native Command Queueing */
113 HOST_CAP_64 = (1 << 31), /* PCI DAC (64-bit DMA) support */
115 /* registers for each SATA port */
116 PORT_LST_ADDR = 0x00, /* command list DMA addr */
117 PORT_LST_ADDR_HI = 0x04, /* command list DMA addr hi */
118 PORT_FIS_ADDR = 0x08, /* FIS rx buf addr */
119 PORT_FIS_ADDR_HI = 0x0c, /* FIS rx buf addr hi */
120 PORT_IRQ_STAT = 0x10, /* interrupt status */
121 PORT_IRQ_MASK = 0x14, /* interrupt enable/disable mask */
122 PORT_CMD = 0x18, /* port command */
123 PORT_TFDATA = 0x20, /* taskfile data */
124 PORT_SIG = 0x24, /* device TF signature */
125 PORT_CMD_ISSUE = 0x38, /* command issue */
126 PORT_SCR_STAT = 0x28, /* SATA phy register: SStatus */
127 PORT_SCR_CTL = 0x2c, /* SATA phy register: SControl */
128 PORT_SCR_ERR = 0x30, /* SATA phy register: SError */
129 PORT_SCR_ACT = 0x34, /* SATA phy register: SActive */
130 PORT_SCR_NTF = 0x3c, /* SATA phy register: SNotification */
132 /* PORT_IRQ_{STAT,MASK} bits */
133 PORT_IRQ_COLD_PRES = (1 << 31), /* cold presence detect */
134 PORT_IRQ_TF_ERR = (1 << 30), /* task file error */
135 PORT_IRQ_HBUS_ERR = (1 << 29), /* host bus fatal error */
136 PORT_IRQ_HBUS_DATA_ERR = (1 << 28), /* host bus data error */
137 PORT_IRQ_IF_ERR = (1 << 27), /* interface fatal error */
138 PORT_IRQ_IF_NONFATAL = (1 << 26), /* interface non-fatal error */
139 PORT_IRQ_OVERFLOW = (1 << 24), /* xfer exhausted available S/G */
140 PORT_IRQ_BAD_PMP = (1 << 23), /* incorrect port multiplier */
142 PORT_IRQ_PHYRDY = (1 << 22), /* PhyRdy changed */
143 PORT_IRQ_DEV_ILCK = (1 << 7), /* device interlock */
144 PORT_IRQ_CONNECT = (1 << 6), /* port connect change status */
145 PORT_IRQ_SG_DONE = (1 << 5), /* descriptor processed */
146 PORT_IRQ_UNK_FIS = (1 << 4), /* unknown FIS rx'd */
147 PORT_IRQ_SDB_FIS = (1 << 3), /* Set Device Bits FIS rx'd */
148 PORT_IRQ_DMAS_FIS = (1 << 2), /* DMA Setup FIS rx'd */
149 PORT_IRQ_PIOS_FIS = (1 << 1), /* PIO Setup FIS rx'd */
150 PORT_IRQ_D2H_REG_FIS = (1 << 0), /* D2H Register FIS rx'd */
152 PORT_IRQ_FREEZE = PORT_IRQ_HBUS_ERR |
153 PORT_IRQ_IF_ERR |
154 PORT_IRQ_CONNECT |
155 PORT_IRQ_PHYRDY |
156 PORT_IRQ_UNK_FIS |
157 PORT_IRQ_BAD_PMP,
158 PORT_IRQ_ERROR = PORT_IRQ_FREEZE |
159 PORT_IRQ_TF_ERR |
160 PORT_IRQ_HBUS_DATA_ERR,
161 DEF_PORT_IRQ = PORT_IRQ_ERROR | PORT_IRQ_SG_DONE |
162 PORT_IRQ_SDB_FIS | PORT_IRQ_DMAS_FIS |
163 PORT_IRQ_PIOS_FIS | PORT_IRQ_D2H_REG_FIS,
165 /* PORT_CMD bits */
166 PORT_CMD_ASP = (1 << 27), /* Aggressive Slumber/Partial */
167 PORT_CMD_ALPE = (1 << 26), /* Aggressive Link PM enable */
168 PORT_CMD_ATAPI = (1 << 24), /* Device is ATAPI */
169 PORT_CMD_PMP = (1 << 17), /* PMP attached */
170 PORT_CMD_LIST_ON = (1 << 15), /* cmd list DMA engine running */
171 PORT_CMD_FIS_ON = (1 << 14), /* FIS DMA engine running */
172 PORT_CMD_FIS_RX = (1 << 4), /* Enable FIS receive DMA engine */
173 PORT_CMD_CLO = (1 << 3), /* Command list override */
174 PORT_CMD_POWER_ON = (1 << 2), /* Power up device */
175 PORT_CMD_SPIN_UP = (1 << 1), /* Spin up device */
176 PORT_CMD_START = (1 << 0), /* Enable port DMA engine */
178 PORT_CMD_ICC_MASK = (0xf << 28), /* i/f ICC state mask */
179 PORT_CMD_ICC_ACTIVE = (0x1 << 28), /* Put i/f in active state */
180 PORT_CMD_ICC_PARTIAL = (0x2 << 28), /* Put i/f in partial state */
181 PORT_CMD_ICC_SLUMBER = (0x6 << 28), /* Put i/f in slumber state */
183 /* hpriv->flags bits */
184 AHCI_HFLAG_NO_NCQ = (1 << 0),
185 AHCI_HFLAG_IGN_IRQ_IF_ERR = (1 << 1), /* ignore IRQ_IF_ERR */
186 AHCI_HFLAG_IGN_SERR_INTERNAL = (1 << 2), /* ignore SERR_INTERNAL */
187 AHCI_HFLAG_32BIT_ONLY = (1 << 3), /* force 32bit */
188 AHCI_HFLAG_MV_PATA = (1 << 4), /* PATA port */
189 AHCI_HFLAG_NO_MSI = (1 << 5), /* no PCI MSI */
190 AHCI_HFLAG_NO_PMP = (1 << 6), /* no PMP */
191 AHCI_HFLAG_NO_HOTPLUG = (1 << 7), /* ignore PxSERR.DIAG.N */
192 AHCI_HFLAG_SECT255 = (1 << 8), /* max 255 sectors */
194 /* ap->flags bits */
196 AHCI_FLAG_COMMON = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
197 ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA |
198 ATA_FLAG_ACPI_SATA | ATA_FLAG_AN |
199 ATA_FLAG_IPM,
201 ICH_MAP = 0x90, /* ICH MAP register */
204 struct ahci_cmd_hdr {
205 __le32 opts;
206 __le32 status;
207 __le32 tbl_addr;
208 __le32 tbl_addr_hi;
209 __le32 reserved[4];
212 struct ahci_sg {
213 __le32 addr;
214 __le32 addr_hi;
215 __le32 reserved;
216 __le32 flags_size;
219 struct ahci_host_priv {
220 unsigned int flags; /* AHCI_HFLAG_* */
221 u32 cap; /* cap to use */
222 u32 port_map; /* port map to use */
223 u32 saved_cap; /* saved initial cap */
224 u32 saved_port_map; /* saved initial port_map */
227 struct ahci_port_priv {
228 struct ata_link *active_link;
229 struct ahci_cmd_hdr *cmd_slot;
230 dma_addr_t cmd_slot_dma;
231 void *cmd_tbl;
232 dma_addr_t cmd_tbl_dma;
233 void *rx_fis;
234 dma_addr_t rx_fis_dma;
235 /* for NCQ spurious interrupt analysis */
236 unsigned int ncq_saw_d2h:1;
237 unsigned int ncq_saw_dmas:1;
238 unsigned int ncq_saw_sdb:1;
239 u32 intr_mask; /* interrupts to enable */
242 static int ahci_scr_read(struct ata_port *ap, unsigned int sc_reg, u32 *val);
243 static int ahci_scr_write(struct ata_port *ap, unsigned int sc_reg, u32 val);
244 static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent);
245 static unsigned int ahci_qc_issue(struct ata_queued_cmd *qc);
246 static bool ahci_qc_fill_rtf(struct ata_queued_cmd *qc);
247 static int ahci_port_start(struct ata_port *ap);
248 static void ahci_port_stop(struct ata_port *ap);
249 static void ahci_qc_prep(struct ata_queued_cmd *qc);
250 static void ahci_freeze(struct ata_port *ap);
251 static void ahci_thaw(struct ata_port *ap);
252 static void ahci_pmp_attach(struct ata_port *ap);
253 static void ahci_pmp_detach(struct ata_port *ap);
254 static int ahci_softreset(struct ata_link *link, unsigned int *class,
255 unsigned long deadline);
256 static int ahci_hardreset(struct ata_link *link, unsigned int *class,
257 unsigned long deadline);
258 static int ahci_vt8251_hardreset(struct ata_link *link, unsigned int *class,
259 unsigned long deadline);
260 static int ahci_p5wdh_hardreset(struct ata_link *link, unsigned int *class,
261 unsigned long deadline);
262 static void ahci_postreset(struct ata_link *link, unsigned int *class);
263 static void ahci_error_handler(struct ata_port *ap);
264 static void ahci_post_internal_cmd(struct ata_queued_cmd *qc);
265 static int ahci_port_resume(struct ata_port *ap);
266 static void ahci_dev_config(struct ata_device *dev);
267 static unsigned int ahci_fill_sg(struct ata_queued_cmd *qc, void *cmd_tbl);
268 static void ahci_fill_cmd_slot(struct ahci_port_priv *pp, unsigned int tag,
269 u32 opts);
270 #ifdef CONFIG_PM
271 static int ahci_port_suspend(struct ata_port *ap, pm_message_t mesg);
272 static int ahci_pci_device_suspend(struct pci_dev *pdev, pm_message_t mesg);
273 static int ahci_pci_device_resume(struct pci_dev *pdev);
274 #endif
276 static struct device_attribute *ahci_shost_attrs[] = {
277 &dev_attr_link_power_management_policy,
278 NULL
281 static struct scsi_host_template ahci_sht = {
282 ATA_NCQ_SHT(DRV_NAME),
283 .can_queue = AHCI_MAX_CMDS - 1,
284 .sg_tablesize = AHCI_MAX_SG,
285 .dma_boundary = AHCI_DMA_BOUNDARY,
286 .shost_attrs = ahci_shost_attrs,
289 static struct ata_port_operations ahci_ops = {
290 .inherits = &sata_pmp_port_ops,
292 .qc_defer = sata_pmp_qc_defer_cmd_switch,
293 .qc_prep = ahci_qc_prep,
294 .qc_issue = ahci_qc_issue,
295 .qc_fill_rtf = ahci_qc_fill_rtf,
297 .freeze = ahci_freeze,
298 .thaw = ahci_thaw,
299 .softreset = ahci_softreset,
300 .hardreset = ahci_hardreset,
301 .postreset = ahci_postreset,
302 .pmp_softreset = ahci_softreset,
303 .error_handler = ahci_error_handler,
304 .post_internal_cmd = ahci_post_internal_cmd,
305 .dev_config = ahci_dev_config,
307 .scr_read = ahci_scr_read,
308 .scr_write = ahci_scr_write,
309 .pmp_attach = ahci_pmp_attach,
310 .pmp_detach = ahci_pmp_detach,
312 .enable_pm = ahci_enable_alpm,
313 .disable_pm = ahci_disable_alpm,
314 #ifdef CONFIG_PM
315 .port_suspend = ahci_port_suspend,
316 .port_resume = ahci_port_resume,
317 #endif
318 .port_start = ahci_port_start,
319 .port_stop = ahci_port_stop,
322 static struct ata_port_operations ahci_vt8251_ops = {
323 .inherits = &ahci_ops,
324 .hardreset = ahci_vt8251_hardreset,
327 static struct ata_port_operations ahci_p5wdh_ops = {
328 .inherits = &ahci_ops,
329 .hardreset = ahci_p5wdh_hardreset,
332 #define AHCI_HFLAGS(flags) .private_data = (void *)(flags)
334 static const struct ata_port_info ahci_port_info[] = {
335 /* board_ahci */
337 .flags = AHCI_FLAG_COMMON,
338 .pio_mask = 0x1f, /* pio0-4 */
339 .udma_mask = ATA_UDMA6,
340 .port_ops = &ahci_ops,
342 /* board_ahci_vt8251 */
344 AHCI_HFLAGS (AHCI_HFLAG_NO_NCQ | AHCI_HFLAG_NO_PMP),
345 .flags = AHCI_FLAG_COMMON,
346 .pio_mask = 0x1f, /* pio0-4 */
347 .udma_mask = ATA_UDMA6,
348 .port_ops = &ahci_vt8251_ops,
350 /* board_ahci_ign_iferr */
352 AHCI_HFLAGS (AHCI_HFLAG_IGN_IRQ_IF_ERR),
353 .flags = AHCI_FLAG_COMMON,
354 .pio_mask = 0x1f, /* pio0-4 */
355 .udma_mask = ATA_UDMA6,
356 .port_ops = &ahci_ops,
358 /* board_ahci_sb600 */
360 AHCI_HFLAGS (AHCI_HFLAG_IGN_SERR_INTERNAL |
361 AHCI_HFLAG_32BIT_ONLY | AHCI_HFLAG_NO_MSI |
362 AHCI_HFLAG_SECT255 | AHCI_HFLAG_NO_PMP),
363 .flags = AHCI_FLAG_COMMON,
364 .pio_mask = 0x1f, /* pio0-4 */
365 .udma_mask = ATA_UDMA6,
366 .port_ops = &ahci_ops,
368 /* board_ahci_mv */
370 AHCI_HFLAGS (AHCI_HFLAG_NO_NCQ | AHCI_HFLAG_NO_MSI |
371 AHCI_HFLAG_MV_PATA),
372 .flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
373 ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA,
374 .pio_mask = 0x1f, /* pio0-4 */
375 .udma_mask = ATA_UDMA6,
376 .port_ops = &ahci_ops,
378 /* board_ahci_sb700 */
380 AHCI_HFLAGS (AHCI_HFLAG_IGN_SERR_INTERNAL |
381 AHCI_HFLAG_NO_PMP),
382 .flags = AHCI_FLAG_COMMON,
383 .pio_mask = 0x1f, /* pio0-4 */
384 .udma_mask = ATA_UDMA6,
385 .port_ops = &ahci_ops,
389 static const struct pci_device_id ahci_pci_tbl[] = {
390 /* Intel */
391 { PCI_VDEVICE(INTEL, 0x2652), board_ahci }, /* ICH6 */
392 { PCI_VDEVICE(INTEL, 0x2653), board_ahci }, /* ICH6M */
393 { PCI_VDEVICE(INTEL, 0x27c1), board_ahci }, /* ICH7 */
394 { PCI_VDEVICE(INTEL, 0x27c5), board_ahci }, /* ICH7M */
395 { PCI_VDEVICE(INTEL, 0x27c3), board_ahci }, /* ICH7R */
396 { PCI_VDEVICE(AL, 0x5288), board_ahci_ign_iferr }, /* ULi M5288 */
397 { PCI_VDEVICE(INTEL, 0x2681), board_ahci }, /* ESB2 */
398 { PCI_VDEVICE(INTEL, 0x2682), board_ahci }, /* ESB2 */
399 { PCI_VDEVICE(INTEL, 0x2683), board_ahci }, /* ESB2 */
400 { PCI_VDEVICE(INTEL, 0x27c6), board_ahci }, /* ICH7-M DH */
401 { PCI_VDEVICE(INTEL, 0x2821), board_ahci }, /* ICH8 */
402 { PCI_VDEVICE(INTEL, 0x2822), board_ahci }, /* ICH8 */
403 { PCI_VDEVICE(INTEL, 0x2824), board_ahci }, /* ICH8 */
404 { PCI_VDEVICE(INTEL, 0x2829), board_ahci }, /* ICH8M */
405 { PCI_VDEVICE(INTEL, 0x282a), board_ahci }, /* ICH8M */
406 { PCI_VDEVICE(INTEL, 0x2922), board_ahci }, /* ICH9 */
407 { PCI_VDEVICE(INTEL, 0x2923), board_ahci }, /* ICH9 */
408 { PCI_VDEVICE(INTEL, 0x2924), board_ahci }, /* ICH9 */
409 { PCI_VDEVICE(INTEL, 0x2925), board_ahci }, /* ICH9 */
410 { PCI_VDEVICE(INTEL, 0x2927), board_ahci }, /* ICH9 */
411 { PCI_VDEVICE(INTEL, 0x2929), board_ahci }, /* ICH9M */
412 { PCI_VDEVICE(INTEL, 0x292a), board_ahci }, /* ICH9M */
413 { PCI_VDEVICE(INTEL, 0x292b), board_ahci }, /* ICH9M */
414 { PCI_VDEVICE(INTEL, 0x292c), board_ahci }, /* ICH9M */
415 { PCI_VDEVICE(INTEL, 0x292f), board_ahci }, /* ICH9M */
416 { PCI_VDEVICE(INTEL, 0x294d), board_ahci }, /* ICH9 */
417 { PCI_VDEVICE(INTEL, 0x294e), board_ahci }, /* ICH9M */
418 { PCI_VDEVICE(INTEL, 0x502a), board_ahci }, /* Tolapai */
419 { PCI_VDEVICE(INTEL, 0x502b), board_ahci }, /* Tolapai */
420 { PCI_VDEVICE(INTEL, 0x3a05), board_ahci }, /* ICH10 */
421 { PCI_VDEVICE(INTEL, 0x3a25), board_ahci }, /* ICH10 */
423 /* JMicron 360/1/3/5/6, match class to avoid IDE function */
424 { PCI_VENDOR_ID_JMICRON, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
425 PCI_CLASS_STORAGE_SATA_AHCI, 0xffffff, board_ahci_ign_iferr },
427 /* ATI */
428 { PCI_VDEVICE(ATI, 0x4380), board_ahci_sb600 }, /* ATI SB600 */
429 { PCI_VDEVICE(ATI, 0x4390), board_ahci_sb700 }, /* ATI SB700/800 */
430 { PCI_VDEVICE(ATI, 0x4391), board_ahci_sb700 }, /* ATI SB700/800 */
431 { PCI_VDEVICE(ATI, 0x4392), board_ahci_sb700 }, /* ATI SB700/800 */
432 { PCI_VDEVICE(ATI, 0x4393), board_ahci_sb700 }, /* ATI SB700/800 */
433 { PCI_VDEVICE(ATI, 0x4394), board_ahci_sb700 }, /* ATI SB700/800 */
434 { PCI_VDEVICE(ATI, 0x4395), board_ahci_sb700 }, /* ATI SB700/800 */
436 /* VIA */
437 { PCI_VDEVICE(VIA, 0x3349), board_ahci_vt8251 }, /* VIA VT8251 */
438 { PCI_VDEVICE(VIA, 0x6287), board_ahci_vt8251 }, /* VIA VT8251 */
440 /* NVIDIA */
441 { PCI_VDEVICE(NVIDIA, 0x044c), board_ahci }, /* MCP65 */
442 { PCI_VDEVICE(NVIDIA, 0x044d), board_ahci }, /* MCP65 */
443 { PCI_VDEVICE(NVIDIA, 0x044e), board_ahci }, /* MCP65 */
444 { PCI_VDEVICE(NVIDIA, 0x044f), board_ahci }, /* MCP65 */
445 { PCI_VDEVICE(NVIDIA, 0x045c), board_ahci }, /* MCP65 */
446 { PCI_VDEVICE(NVIDIA, 0x045d), board_ahci }, /* MCP65 */
447 { PCI_VDEVICE(NVIDIA, 0x045e), board_ahci }, /* MCP65 */
448 { PCI_VDEVICE(NVIDIA, 0x045f), board_ahci }, /* MCP65 */
449 { PCI_VDEVICE(NVIDIA, 0x0550), board_ahci }, /* MCP67 */
450 { PCI_VDEVICE(NVIDIA, 0x0551), board_ahci }, /* MCP67 */
451 { PCI_VDEVICE(NVIDIA, 0x0552), board_ahci }, /* MCP67 */
452 { PCI_VDEVICE(NVIDIA, 0x0553), board_ahci }, /* MCP67 */
453 { PCI_VDEVICE(NVIDIA, 0x0554), board_ahci }, /* MCP67 */
454 { PCI_VDEVICE(NVIDIA, 0x0555), board_ahci }, /* MCP67 */
455 { PCI_VDEVICE(NVIDIA, 0x0556), board_ahci }, /* MCP67 */
456 { PCI_VDEVICE(NVIDIA, 0x0557), board_ahci }, /* MCP67 */
457 { PCI_VDEVICE(NVIDIA, 0x0558), board_ahci }, /* MCP67 */
458 { PCI_VDEVICE(NVIDIA, 0x0559), board_ahci }, /* MCP67 */
459 { PCI_VDEVICE(NVIDIA, 0x055a), board_ahci }, /* MCP67 */
460 { PCI_VDEVICE(NVIDIA, 0x055b), board_ahci }, /* MCP67 */
461 { PCI_VDEVICE(NVIDIA, 0x07f0), board_ahci }, /* MCP73 */
462 { PCI_VDEVICE(NVIDIA, 0x07f1), board_ahci }, /* MCP73 */
463 { PCI_VDEVICE(NVIDIA, 0x07f2), board_ahci }, /* MCP73 */
464 { PCI_VDEVICE(NVIDIA, 0x07f3), board_ahci }, /* MCP73 */
465 { PCI_VDEVICE(NVIDIA, 0x07f4), board_ahci }, /* MCP73 */
466 { PCI_VDEVICE(NVIDIA, 0x07f5), board_ahci }, /* MCP73 */
467 { PCI_VDEVICE(NVIDIA, 0x07f6), board_ahci }, /* MCP73 */
468 { PCI_VDEVICE(NVIDIA, 0x07f7), board_ahci }, /* MCP73 */
469 { PCI_VDEVICE(NVIDIA, 0x07f8), board_ahci }, /* MCP73 */
470 { PCI_VDEVICE(NVIDIA, 0x07f9), board_ahci }, /* MCP73 */
471 { PCI_VDEVICE(NVIDIA, 0x07fa), board_ahci }, /* MCP73 */
472 { PCI_VDEVICE(NVIDIA, 0x07fb), board_ahci }, /* MCP73 */
473 { PCI_VDEVICE(NVIDIA, 0x0ad0), board_ahci }, /* MCP77 */
474 { PCI_VDEVICE(NVIDIA, 0x0ad1), board_ahci }, /* MCP77 */
475 { PCI_VDEVICE(NVIDIA, 0x0ad2), board_ahci }, /* MCP77 */
476 { PCI_VDEVICE(NVIDIA, 0x0ad3), board_ahci }, /* MCP77 */
477 { PCI_VDEVICE(NVIDIA, 0x0ad4), board_ahci }, /* MCP77 */
478 { PCI_VDEVICE(NVIDIA, 0x0ad5), board_ahci }, /* MCP77 */
479 { PCI_VDEVICE(NVIDIA, 0x0ad6), board_ahci }, /* MCP77 */
480 { PCI_VDEVICE(NVIDIA, 0x0ad7), board_ahci }, /* MCP77 */
481 { PCI_VDEVICE(NVIDIA, 0x0ad8), board_ahci }, /* MCP77 */
482 { PCI_VDEVICE(NVIDIA, 0x0ad9), board_ahci }, /* MCP77 */
483 { PCI_VDEVICE(NVIDIA, 0x0ada), board_ahci }, /* MCP77 */
484 { PCI_VDEVICE(NVIDIA, 0x0adb), board_ahci }, /* MCP77 */
485 { PCI_VDEVICE(NVIDIA, 0x0ab4), board_ahci }, /* MCP79 */
486 { PCI_VDEVICE(NVIDIA, 0x0ab5), board_ahci }, /* MCP79 */
487 { PCI_VDEVICE(NVIDIA, 0x0ab6), board_ahci }, /* MCP79 */
488 { PCI_VDEVICE(NVIDIA, 0x0ab7), board_ahci }, /* MCP79 */
489 { PCI_VDEVICE(NVIDIA, 0x0ab8), board_ahci }, /* MCP79 */
490 { PCI_VDEVICE(NVIDIA, 0x0ab9), board_ahci }, /* MCP79 */
491 { PCI_VDEVICE(NVIDIA, 0x0aba), board_ahci }, /* MCP79 */
492 { PCI_VDEVICE(NVIDIA, 0x0abb), board_ahci }, /* MCP79 */
493 { PCI_VDEVICE(NVIDIA, 0x0abc), board_ahci }, /* MCP79 */
494 { PCI_VDEVICE(NVIDIA, 0x0abd), board_ahci }, /* MCP79 */
495 { PCI_VDEVICE(NVIDIA, 0x0abe), board_ahci }, /* MCP79 */
496 { PCI_VDEVICE(NVIDIA, 0x0abf), board_ahci }, /* MCP79 */
497 { PCI_VDEVICE(NVIDIA, 0x0bc8), board_ahci }, /* MCP7B */
498 { PCI_VDEVICE(NVIDIA, 0x0bc9), board_ahci }, /* MCP7B */
499 { PCI_VDEVICE(NVIDIA, 0x0bca), board_ahci }, /* MCP7B */
500 { PCI_VDEVICE(NVIDIA, 0x0bcb), board_ahci }, /* MCP7B */
501 { PCI_VDEVICE(NVIDIA, 0x0bcc), board_ahci }, /* MCP7B */
502 { PCI_VDEVICE(NVIDIA, 0x0bcd), board_ahci }, /* MCP7B */
503 { PCI_VDEVICE(NVIDIA, 0x0bce), board_ahci }, /* MCP7B */
504 { PCI_VDEVICE(NVIDIA, 0x0bcf), board_ahci }, /* MCP7B */
505 { PCI_VDEVICE(NVIDIA, 0x0bd0), board_ahci }, /* MCP7B */
506 { PCI_VDEVICE(NVIDIA, 0x0bd1), board_ahci }, /* MCP7B */
507 { PCI_VDEVICE(NVIDIA, 0x0bd2), board_ahci }, /* MCP7B */
508 { PCI_VDEVICE(NVIDIA, 0x0bd3), board_ahci }, /* MCP7B */
510 /* SiS */
511 { PCI_VDEVICE(SI, 0x1184), board_ahci }, /* SiS 966 */
512 { PCI_VDEVICE(SI, 0x1185), board_ahci }, /* SiS 966 */
513 { PCI_VDEVICE(SI, 0x0186), board_ahci }, /* SiS 968 */
515 /* Marvell */
516 { PCI_VDEVICE(MARVELL, 0x6145), board_ahci_mv }, /* 6145 */
517 { PCI_VDEVICE(MARVELL, 0x6121), board_ahci_mv }, /* 6121 */
519 /* Generic, PCI class code for AHCI */
520 { PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
521 PCI_CLASS_STORAGE_SATA_AHCI, 0xffffff, board_ahci },
523 { } /* terminate list */
527 static struct pci_driver ahci_pci_driver = {
528 .name = DRV_NAME,
529 .id_table = ahci_pci_tbl,
530 .probe = ahci_init_one,
531 .remove = ata_pci_remove_one,
532 #ifdef CONFIG_PM
533 .suspend = ahci_pci_device_suspend,
534 .resume = ahci_pci_device_resume,
535 #endif
539 static inline int ahci_nr_ports(u32 cap)
541 return (cap & 0x1f) + 1;
544 static inline void __iomem *__ahci_port_base(struct ata_host *host,
545 unsigned int port_no)
547 void __iomem *mmio = host->iomap[AHCI_PCI_BAR];
549 return mmio + 0x100 + (port_no * 0x80);
552 static inline void __iomem *ahci_port_base(struct ata_port *ap)
554 return __ahci_port_base(ap->host, ap->port_no);
557 static void ahci_enable_ahci(void __iomem *mmio)
559 int i;
560 u32 tmp;
562 /* turn on AHCI_EN */
563 tmp = readl(mmio + HOST_CTL);
564 if (tmp & HOST_AHCI_EN)
565 return;
567 /* Some controllers need AHCI_EN to be written multiple times.
568 * Try a few times before giving up.
570 for (i = 0; i < 5; i++) {
571 tmp |= HOST_AHCI_EN;
572 writel(tmp, mmio + HOST_CTL);
573 tmp = readl(mmio + HOST_CTL); /* flush && sanity check */
574 if (tmp & HOST_AHCI_EN)
575 return;
576 msleep(10);
579 WARN_ON(1);
583 * ahci_save_initial_config - Save and fixup initial config values
584 * @pdev: target PCI device
585 * @hpriv: host private area to store config values
587 * Some registers containing configuration info might be setup by
588 * BIOS and might be cleared on reset. This function saves the
589 * initial values of those registers into @hpriv such that they
590 * can be restored after controller reset.
592 * If inconsistent, config values are fixed up by this function.
594 * LOCKING:
595 * None.
597 static void ahci_save_initial_config(struct pci_dev *pdev,
598 struct ahci_host_priv *hpriv)
600 void __iomem *mmio = pcim_iomap_table(pdev)[AHCI_PCI_BAR];
601 u32 cap, port_map;
602 int i;
603 int mv;
605 /* make sure AHCI mode is enabled before accessing CAP */
606 ahci_enable_ahci(mmio);
608 /* Values prefixed with saved_ are written back to host after
609 * reset. Values without are used for driver operation.
611 hpriv->saved_cap = cap = readl(mmio + HOST_CAP);
612 hpriv->saved_port_map = port_map = readl(mmio + HOST_PORTS_IMPL);
614 /* some chips have errata preventing 64bit use */
615 if ((cap & HOST_CAP_64) && (hpriv->flags & AHCI_HFLAG_32BIT_ONLY)) {
616 dev_printk(KERN_INFO, &pdev->dev,
617 "controller can't do 64bit DMA, forcing 32bit\n");
618 cap &= ~HOST_CAP_64;
621 if ((cap & HOST_CAP_NCQ) && (hpriv->flags & AHCI_HFLAG_NO_NCQ)) {
622 dev_printk(KERN_INFO, &pdev->dev,
623 "controller can't do NCQ, turning off CAP_NCQ\n");
624 cap &= ~HOST_CAP_NCQ;
627 if ((cap & HOST_CAP_PMP) && (hpriv->flags & AHCI_HFLAG_NO_PMP)) {
628 dev_printk(KERN_INFO, &pdev->dev,
629 "controller can't do PMP, turning off CAP_PMP\n");
630 cap &= ~HOST_CAP_PMP;
634 * Temporary Marvell 6145 hack: PATA port presence
635 * is asserted through the standard AHCI port
636 * presence register, as bit 4 (counting from 0)
638 if (hpriv->flags & AHCI_HFLAG_MV_PATA) {
639 if (pdev->device == 0x6121)
640 mv = 0x3;
641 else
642 mv = 0xf;
643 dev_printk(KERN_ERR, &pdev->dev,
644 "MV_AHCI HACK: port_map %x -> %x\n",
645 port_map,
646 port_map & mv);
648 port_map &= mv;
651 /* cross check port_map and cap.n_ports */
652 if (port_map) {
653 int map_ports = 0;
655 for (i = 0; i < AHCI_MAX_PORTS; i++)
656 if (port_map & (1 << i))
657 map_ports++;
659 /* If PI has more ports than n_ports, whine, clear
660 * port_map and let it be generated from n_ports.
662 if (map_ports > ahci_nr_ports(cap)) {
663 dev_printk(KERN_WARNING, &pdev->dev,
664 "implemented port map (0x%x) contains more "
665 "ports than nr_ports (%u), using nr_ports\n",
666 port_map, ahci_nr_ports(cap));
667 port_map = 0;
671 /* fabricate port_map from cap.nr_ports */
672 if (!port_map) {
673 port_map = (1 << ahci_nr_ports(cap)) - 1;
674 dev_printk(KERN_WARNING, &pdev->dev,
675 "forcing PORTS_IMPL to 0x%x\n", port_map);
677 /* write the fixed up value to the PI register */
678 hpriv->saved_port_map = port_map;
681 /* record values to use during operation */
682 hpriv->cap = cap;
683 hpriv->port_map = port_map;
687 * ahci_restore_initial_config - Restore initial config
688 * @host: target ATA host
690 * Restore initial config stored by ahci_save_initial_config().
692 * LOCKING:
693 * None.
695 static void ahci_restore_initial_config(struct ata_host *host)
697 struct ahci_host_priv *hpriv = host->private_data;
698 void __iomem *mmio = host->iomap[AHCI_PCI_BAR];
700 writel(hpriv->saved_cap, mmio + HOST_CAP);
701 writel(hpriv->saved_port_map, mmio + HOST_PORTS_IMPL);
702 (void) readl(mmio + HOST_PORTS_IMPL); /* flush */
705 static unsigned ahci_scr_offset(struct ata_port *ap, unsigned int sc_reg)
707 static const int offset[] = {
708 [SCR_STATUS] = PORT_SCR_STAT,
709 [SCR_CONTROL] = PORT_SCR_CTL,
710 [SCR_ERROR] = PORT_SCR_ERR,
711 [SCR_ACTIVE] = PORT_SCR_ACT,
712 [SCR_NOTIFICATION] = PORT_SCR_NTF,
714 struct ahci_host_priv *hpriv = ap->host->private_data;
716 if (sc_reg < ARRAY_SIZE(offset) &&
717 (sc_reg != SCR_NOTIFICATION || (hpriv->cap & HOST_CAP_SNTF)))
718 return offset[sc_reg];
719 return 0;
722 static int ahci_scr_read(struct ata_port *ap, unsigned int sc_reg, u32 *val)
724 void __iomem *port_mmio = ahci_port_base(ap);
725 int offset = ahci_scr_offset(ap, sc_reg);
727 if (offset) {
728 *val = readl(port_mmio + offset);
729 return 0;
731 return -EINVAL;
734 static int ahci_scr_write(struct ata_port *ap, unsigned int sc_reg, u32 val)
736 void __iomem *port_mmio = ahci_port_base(ap);
737 int offset = ahci_scr_offset(ap, sc_reg);
739 if (offset) {
740 writel(val, port_mmio + offset);
741 return 0;
743 return -EINVAL;
746 static void ahci_start_engine(struct ata_port *ap)
748 void __iomem *port_mmio = ahci_port_base(ap);
749 u32 tmp;
751 /* start DMA */
752 tmp = readl(port_mmio + PORT_CMD);
753 tmp |= PORT_CMD_START;
754 writel(tmp, port_mmio + PORT_CMD);
755 readl(port_mmio + PORT_CMD); /* flush */
758 static int ahci_stop_engine(struct ata_port *ap)
760 void __iomem *port_mmio = ahci_port_base(ap);
761 u32 tmp;
763 tmp = readl(port_mmio + PORT_CMD);
765 /* check if the HBA is idle */
766 if ((tmp & (PORT_CMD_START | PORT_CMD_LIST_ON)) == 0)
767 return 0;
769 /* setting HBA to idle */
770 tmp &= ~PORT_CMD_START;
771 writel(tmp, port_mmio + PORT_CMD);
773 /* wait for engine to stop. This could be as long as 500 msec */
774 tmp = ata_wait_register(port_mmio + PORT_CMD,
775 PORT_CMD_LIST_ON, PORT_CMD_LIST_ON, 1, 500);
776 if (tmp & PORT_CMD_LIST_ON)
777 return -EIO;
779 return 0;
782 static void ahci_start_fis_rx(struct ata_port *ap)
784 void __iomem *port_mmio = ahci_port_base(ap);
785 struct ahci_host_priv *hpriv = ap->host->private_data;
786 struct ahci_port_priv *pp = ap->private_data;
787 u32 tmp;
789 /* set FIS registers */
790 if (hpriv->cap & HOST_CAP_64)
791 writel((pp->cmd_slot_dma >> 16) >> 16,
792 port_mmio + PORT_LST_ADDR_HI);
793 writel(pp->cmd_slot_dma & 0xffffffff, port_mmio + PORT_LST_ADDR);
795 if (hpriv->cap & HOST_CAP_64)
796 writel((pp->rx_fis_dma >> 16) >> 16,
797 port_mmio + PORT_FIS_ADDR_HI);
798 writel(pp->rx_fis_dma & 0xffffffff, port_mmio + PORT_FIS_ADDR);
800 /* enable FIS reception */
801 tmp = readl(port_mmio + PORT_CMD);
802 tmp |= PORT_CMD_FIS_RX;
803 writel(tmp, port_mmio + PORT_CMD);
805 /* flush */
806 readl(port_mmio + PORT_CMD);
809 static int ahci_stop_fis_rx(struct ata_port *ap)
811 void __iomem *port_mmio = ahci_port_base(ap);
812 u32 tmp;
814 /* disable FIS reception */
815 tmp = readl(port_mmio + PORT_CMD);
816 tmp &= ~PORT_CMD_FIS_RX;
817 writel(tmp, port_mmio + PORT_CMD);
819 /* wait for completion, spec says 500ms, give it 1000 */
820 tmp = ata_wait_register(port_mmio + PORT_CMD, PORT_CMD_FIS_ON,
821 PORT_CMD_FIS_ON, 10, 1000);
822 if (tmp & PORT_CMD_FIS_ON)
823 return -EBUSY;
825 return 0;
828 static void ahci_power_up(struct ata_port *ap)
830 struct ahci_host_priv *hpriv = ap->host->private_data;
831 void __iomem *port_mmio = ahci_port_base(ap);
832 u32 cmd;
834 cmd = readl(port_mmio + PORT_CMD) & ~PORT_CMD_ICC_MASK;
836 /* spin up device */
837 if (hpriv->cap & HOST_CAP_SSS) {
838 cmd |= PORT_CMD_SPIN_UP;
839 writel(cmd, port_mmio + PORT_CMD);
842 /* wake up link */
843 writel(cmd | PORT_CMD_ICC_ACTIVE, port_mmio + PORT_CMD);
846 static void ahci_disable_alpm(struct ata_port *ap)
848 struct ahci_host_priv *hpriv = ap->host->private_data;
849 void __iomem *port_mmio = ahci_port_base(ap);
850 u32 cmd;
851 struct ahci_port_priv *pp = ap->private_data;
853 /* IPM bits should be disabled by libata-core */
854 /* get the existing command bits */
855 cmd = readl(port_mmio + PORT_CMD);
857 /* disable ALPM and ASP */
858 cmd &= ~PORT_CMD_ASP;
859 cmd &= ~PORT_CMD_ALPE;
861 /* force the interface back to active */
862 cmd |= PORT_CMD_ICC_ACTIVE;
864 /* write out new cmd value */
865 writel(cmd, port_mmio + PORT_CMD);
866 cmd = readl(port_mmio + PORT_CMD);
868 /* wait 10ms to be sure we've come out of any low power state */
869 msleep(10);
871 /* clear out any PhyRdy stuff from interrupt status */
872 writel(PORT_IRQ_PHYRDY, port_mmio + PORT_IRQ_STAT);
874 /* go ahead and clean out PhyRdy Change from Serror too */
875 ahci_scr_write(ap, SCR_ERROR, ((1 << 16) | (1 << 18)));
878 * Clear flag to indicate that we should ignore all PhyRdy
879 * state changes
881 hpriv->flags &= ~AHCI_HFLAG_NO_HOTPLUG;
884 * Enable interrupts on Phy Ready.
886 pp->intr_mask |= PORT_IRQ_PHYRDY;
887 writel(pp->intr_mask, port_mmio + PORT_IRQ_MASK);
890 * don't change the link pm policy - we can be called
891 * just to turn of link pm temporarily
895 static int ahci_enable_alpm(struct ata_port *ap,
896 enum link_pm policy)
898 struct ahci_host_priv *hpriv = ap->host->private_data;
899 void __iomem *port_mmio = ahci_port_base(ap);
900 u32 cmd;
901 struct ahci_port_priv *pp = ap->private_data;
902 u32 asp;
904 /* Make sure the host is capable of link power management */
905 if (!(hpriv->cap & HOST_CAP_ALPM))
906 return -EINVAL;
908 switch (policy) {
909 case MAX_PERFORMANCE:
910 case NOT_AVAILABLE:
912 * if we came here with NOT_AVAILABLE,
913 * it just means this is the first time we
914 * have tried to enable - default to max performance,
915 * and let the user go to lower power modes on request.
917 ahci_disable_alpm(ap);
918 return 0;
919 case MIN_POWER:
920 /* configure HBA to enter SLUMBER */
921 asp = PORT_CMD_ASP;
922 break;
923 case MEDIUM_POWER:
924 /* configure HBA to enter PARTIAL */
925 asp = 0;
926 break;
927 default:
928 return -EINVAL;
932 * Disable interrupts on Phy Ready. This keeps us from
933 * getting woken up due to spurious phy ready interrupts
934 * TBD - Hot plug should be done via polling now, is
935 * that even supported?
937 pp->intr_mask &= ~PORT_IRQ_PHYRDY;
938 writel(pp->intr_mask, port_mmio + PORT_IRQ_MASK);
941 * Set a flag to indicate that we should ignore all PhyRdy
942 * state changes since these can happen now whenever we
943 * change link state
945 hpriv->flags |= AHCI_HFLAG_NO_HOTPLUG;
947 /* get the existing command bits */
948 cmd = readl(port_mmio + PORT_CMD);
951 * Set ASP based on Policy
953 cmd |= asp;
956 * Setting this bit will instruct the HBA to aggressively
957 * enter a lower power link state when it's appropriate and
958 * based on the value set above for ASP
960 cmd |= PORT_CMD_ALPE;
962 /* write out new cmd value */
963 writel(cmd, port_mmio + PORT_CMD);
964 cmd = readl(port_mmio + PORT_CMD);
966 /* IPM bits should be set by libata-core */
967 return 0;
970 #ifdef CONFIG_PM
971 static void ahci_power_down(struct ata_port *ap)
973 struct ahci_host_priv *hpriv = ap->host->private_data;
974 void __iomem *port_mmio = ahci_port_base(ap);
975 u32 cmd, scontrol;
977 if (!(hpriv->cap & HOST_CAP_SSS))
978 return;
980 /* put device into listen mode, first set PxSCTL.DET to 0 */
981 scontrol = readl(port_mmio + PORT_SCR_CTL);
982 scontrol &= ~0xf;
983 writel(scontrol, port_mmio + PORT_SCR_CTL);
985 /* then set PxCMD.SUD to 0 */
986 cmd = readl(port_mmio + PORT_CMD) & ~PORT_CMD_ICC_MASK;
987 cmd &= ~PORT_CMD_SPIN_UP;
988 writel(cmd, port_mmio + PORT_CMD);
990 #endif
992 static void ahci_start_port(struct ata_port *ap)
994 /* enable FIS reception */
995 ahci_start_fis_rx(ap);
997 /* enable DMA */
998 ahci_start_engine(ap);
1001 static int ahci_deinit_port(struct ata_port *ap, const char **emsg)
1003 int rc;
1005 /* disable DMA */
1006 rc = ahci_stop_engine(ap);
1007 if (rc) {
1008 *emsg = "failed to stop engine";
1009 return rc;
1012 /* disable FIS reception */
1013 rc = ahci_stop_fis_rx(ap);
1014 if (rc) {
1015 *emsg = "failed stop FIS RX";
1016 return rc;
1019 return 0;
1022 static int ahci_reset_controller(struct ata_host *host)
1024 struct pci_dev *pdev = to_pci_dev(host->dev);
1025 struct ahci_host_priv *hpriv = host->private_data;
1026 void __iomem *mmio = host->iomap[AHCI_PCI_BAR];
1027 u32 tmp;
1029 /* we must be in AHCI mode, before using anything
1030 * AHCI-specific, such as HOST_RESET.
1032 ahci_enable_ahci(mmio);
1034 /* global controller reset */
1035 if (!ahci_skip_host_reset) {
1036 tmp = readl(mmio + HOST_CTL);
1037 if ((tmp & HOST_RESET) == 0) {
1038 writel(tmp | HOST_RESET, mmio + HOST_CTL);
1039 readl(mmio + HOST_CTL); /* flush */
1042 /* reset must complete within 1 second, or
1043 * the hardware should be considered fried.
1045 ssleep(1);
1047 tmp = readl(mmio + HOST_CTL);
1048 if (tmp & HOST_RESET) {
1049 dev_printk(KERN_ERR, host->dev,
1050 "controller reset failed (0x%x)\n", tmp);
1051 return -EIO;
1054 /* turn on AHCI mode */
1055 ahci_enable_ahci(mmio);
1057 /* Some registers might be cleared on reset. Restore
1058 * initial values.
1060 ahci_restore_initial_config(host);
1061 } else
1062 dev_printk(KERN_INFO, host->dev,
1063 "skipping global host reset\n");
1065 if (pdev->vendor == PCI_VENDOR_ID_INTEL) {
1066 u16 tmp16;
1068 /* configure PCS */
1069 pci_read_config_word(pdev, 0x92, &tmp16);
1070 if ((tmp16 & hpriv->port_map) != hpriv->port_map) {
1071 tmp16 |= hpriv->port_map;
1072 pci_write_config_word(pdev, 0x92, tmp16);
1076 return 0;
1079 static void ahci_port_init(struct pci_dev *pdev, struct ata_port *ap,
1080 int port_no, void __iomem *mmio,
1081 void __iomem *port_mmio)
1083 const char *emsg = NULL;
1084 int rc;
1085 u32 tmp;
1087 /* make sure port is not active */
1088 rc = ahci_deinit_port(ap, &emsg);
1089 if (rc)
1090 dev_printk(KERN_WARNING, &pdev->dev,
1091 "%s (%d)\n", emsg, rc);
1093 /* clear SError */
1094 tmp = readl(port_mmio + PORT_SCR_ERR);
1095 VPRINTK("PORT_SCR_ERR 0x%x\n", tmp);
1096 writel(tmp, port_mmio + PORT_SCR_ERR);
1098 /* clear port IRQ */
1099 tmp = readl(port_mmio + PORT_IRQ_STAT);
1100 VPRINTK("PORT_IRQ_STAT 0x%x\n", tmp);
1101 if (tmp)
1102 writel(tmp, port_mmio + PORT_IRQ_STAT);
1104 writel(1 << port_no, mmio + HOST_IRQ_STAT);
1107 static void ahci_init_controller(struct ata_host *host)
1109 struct ahci_host_priv *hpriv = host->private_data;
1110 struct pci_dev *pdev = to_pci_dev(host->dev);
1111 void __iomem *mmio = host->iomap[AHCI_PCI_BAR];
1112 int i;
1113 void __iomem *port_mmio;
1114 u32 tmp;
1115 int mv;
1117 if (hpriv->flags & AHCI_HFLAG_MV_PATA) {
1118 if (pdev->device == 0x6121)
1119 mv = 2;
1120 else
1121 mv = 4;
1122 port_mmio = __ahci_port_base(host, mv);
1124 writel(0, port_mmio + PORT_IRQ_MASK);
1126 /* clear port IRQ */
1127 tmp = readl(port_mmio + PORT_IRQ_STAT);
1128 VPRINTK("PORT_IRQ_STAT 0x%x\n", tmp);
1129 if (tmp)
1130 writel(tmp, port_mmio + PORT_IRQ_STAT);
1133 for (i = 0; i < host->n_ports; i++) {
1134 struct ata_port *ap = host->ports[i];
1136 port_mmio = ahci_port_base(ap);
1137 if (ata_port_is_dummy(ap))
1138 continue;
1140 ahci_port_init(pdev, ap, i, mmio, port_mmio);
1143 tmp = readl(mmio + HOST_CTL);
1144 VPRINTK("HOST_CTL 0x%x\n", tmp);
1145 writel(tmp | HOST_IRQ_EN, mmio + HOST_CTL);
1146 tmp = readl(mmio + HOST_CTL);
1147 VPRINTK("HOST_CTL 0x%x\n", tmp);
1150 static void ahci_dev_config(struct ata_device *dev)
1152 struct ahci_host_priv *hpriv = dev->link->ap->host->private_data;
1154 if (hpriv->flags & AHCI_HFLAG_SECT255) {
1155 dev->max_sectors = 255;
1156 ata_dev_printk(dev, KERN_INFO,
1157 "SB600 AHCI: limiting to 255 sectors per cmd\n");
1161 static unsigned int ahci_dev_classify(struct ata_port *ap)
1163 void __iomem *port_mmio = ahci_port_base(ap);
1164 struct ata_taskfile tf;
1165 u32 tmp;
1167 tmp = readl(port_mmio + PORT_SIG);
1168 tf.lbah = (tmp >> 24) & 0xff;
1169 tf.lbam = (tmp >> 16) & 0xff;
1170 tf.lbal = (tmp >> 8) & 0xff;
1171 tf.nsect = (tmp) & 0xff;
1173 return ata_dev_classify(&tf);
1176 static void ahci_fill_cmd_slot(struct ahci_port_priv *pp, unsigned int tag,
1177 u32 opts)
1179 dma_addr_t cmd_tbl_dma;
1181 cmd_tbl_dma = pp->cmd_tbl_dma + tag * AHCI_CMD_TBL_SZ;
1183 pp->cmd_slot[tag].opts = cpu_to_le32(opts);
1184 pp->cmd_slot[tag].status = 0;
1185 pp->cmd_slot[tag].tbl_addr = cpu_to_le32(cmd_tbl_dma & 0xffffffff);
1186 pp->cmd_slot[tag].tbl_addr_hi = cpu_to_le32((cmd_tbl_dma >> 16) >> 16);
1189 static int ahci_kick_engine(struct ata_port *ap, int force_restart)
1191 void __iomem *port_mmio = ahci_port_base(ap);
1192 struct ahci_host_priv *hpriv = ap->host->private_data;
1193 u8 status = readl(port_mmio + PORT_TFDATA) & 0xFF;
1194 u32 tmp;
1195 int busy, rc;
1197 /* do we need to kick the port? */
1198 busy = status & (ATA_BUSY | ATA_DRQ);
1199 if (!busy && !force_restart)
1200 return 0;
1202 /* stop engine */
1203 rc = ahci_stop_engine(ap);
1204 if (rc)
1205 goto out_restart;
1207 /* need to do CLO? */
1208 if (!busy) {
1209 rc = 0;
1210 goto out_restart;
1213 if (!(hpriv->cap & HOST_CAP_CLO)) {
1214 rc = -EOPNOTSUPP;
1215 goto out_restart;
1218 /* perform CLO */
1219 tmp = readl(port_mmio + PORT_CMD);
1220 tmp |= PORT_CMD_CLO;
1221 writel(tmp, port_mmio + PORT_CMD);
1223 rc = 0;
1224 tmp = ata_wait_register(port_mmio + PORT_CMD,
1225 PORT_CMD_CLO, PORT_CMD_CLO, 1, 500);
1226 if (tmp & PORT_CMD_CLO)
1227 rc = -EIO;
1229 /* restart engine */
1230 out_restart:
1231 ahci_start_engine(ap);
1232 return rc;
1235 static int ahci_exec_polled_cmd(struct ata_port *ap, int pmp,
1236 struct ata_taskfile *tf, int is_cmd, u16 flags,
1237 unsigned long timeout_msec)
1239 const u32 cmd_fis_len = 5; /* five dwords */
1240 struct ahci_port_priv *pp = ap->private_data;
1241 void __iomem *port_mmio = ahci_port_base(ap);
1242 u8 *fis = pp->cmd_tbl;
1243 u32 tmp;
1245 /* prep the command */
1246 ata_tf_to_fis(tf, pmp, is_cmd, fis);
1247 ahci_fill_cmd_slot(pp, 0, cmd_fis_len | flags | (pmp << 12));
1249 /* issue & wait */
1250 writel(1, port_mmio + PORT_CMD_ISSUE);
1252 if (timeout_msec) {
1253 tmp = ata_wait_register(port_mmio + PORT_CMD_ISSUE, 0x1, 0x1,
1254 1, timeout_msec);
1255 if (tmp & 0x1) {
1256 ahci_kick_engine(ap, 1);
1257 return -EBUSY;
1259 } else
1260 readl(port_mmio + PORT_CMD_ISSUE); /* flush */
1262 return 0;
1265 static int ahci_check_ready(struct ata_link *link)
1267 void __iomem *port_mmio = ahci_port_base(link->ap);
1268 u8 status = readl(port_mmio + PORT_TFDATA) & 0xFF;
1270 return ata_check_ready(status);
1273 static int ahci_softreset(struct ata_link *link, unsigned int *class,
1274 unsigned long deadline)
1276 struct ata_port *ap = link->ap;
1277 int pmp = sata_srst_pmp(link);
1278 const char *reason = NULL;
1279 unsigned long now, msecs;
1280 struct ata_taskfile tf;
1281 int rc;
1283 DPRINTK("ENTER\n");
1285 /* prepare for SRST (AHCI-1.1 10.4.1) */
1286 rc = ahci_kick_engine(ap, 1);
1287 if (rc && rc != -EOPNOTSUPP)
1288 ata_link_printk(link, KERN_WARNING,
1289 "failed to reset engine (errno=%d)\n", rc);
1291 ata_tf_init(link->device, &tf);
1293 /* issue the first D2H Register FIS */
1294 msecs = 0;
1295 now = jiffies;
1296 if (time_after(now, deadline))
1297 msecs = jiffies_to_msecs(deadline - now);
1299 tf.ctl |= ATA_SRST;
1300 if (ahci_exec_polled_cmd(ap, pmp, &tf, 0,
1301 AHCI_CMD_RESET | AHCI_CMD_CLR_BUSY, msecs)) {
1302 rc = -EIO;
1303 reason = "1st FIS failed";
1304 goto fail;
1307 /* spec says at least 5us, but be generous and sleep for 1ms */
1308 msleep(1);
1310 /* issue the second D2H Register FIS */
1311 tf.ctl &= ~ATA_SRST;
1312 ahci_exec_polled_cmd(ap, pmp, &tf, 0, 0, 0);
1314 /* wait for link to become ready */
1315 rc = ata_wait_after_reset(link, deadline, ahci_check_ready);
1316 /* link occupied, -ENODEV too is an error */
1317 if (rc) {
1318 reason = "device not ready";
1319 goto fail;
1321 *class = ahci_dev_classify(ap);
1323 DPRINTK("EXIT, class=%u\n", *class);
1324 return 0;
1326 fail:
1327 ata_link_printk(link, KERN_ERR, "softreset failed (%s)\n", reason);
1328 return rc;
1331 static int ahci_hardreset(struct ata_link *link, unsigned int *class,
1332 unsigned long deadline)
1334 const unsigned long *timing = sata_ehc_deb_timing(&link->eh_context);
1335 struct ata_port *ap = link->ap;
1336 struct ahci_port_priv *pp = ap->private_data;
1337 u8 *d2h_fis = pp->rx_fis + RX_FIS_D2H_REG;
1338 struct ata_taskfile tf;
1339 bool online;
1340 int rc;
1342 DPRINTK("ENTER\n");
1344 ahci_stop_engine(ap);
1346 /* clear D2H reception area to properly wait for D2H FIS */
1347 ata_tf_init(link->device, &tf);
1348 tf.command = 0x80;
1349 ata_tf_to_fis(&tf, 0, 0, d2h_fis);
1351 rc = sata_link_hardreset(link, timing, deadline, &online,
1352 ahci_check_ready);
1354 ahci_start_engine(ap);
1356 if (online)
1357 *class = ahci_dev_classify(ap);
1359 DPRINTK("EXIT, rc=%d, class=%u\n", rc, *class);
1360 return rc;
1363 static int ahci_vt8251_hardreset(struct ata_link *link, unsigned int *class,
1364 unsigned long deadline)
1366 struct ata_port *ap = link->ap;
1367 bool online;
1368 int rc;
1370 DPRINTK("ENTER\n");
1372 ahci_stop_engine(ap);
1374 rc = sata_link_hardreset(link, sata_ehc_deb_timing(&link->eh_context),
1375 deadline, &online, NULL);
1377 ahci_start_engine(ap);
1379 DPRINTK("EXIT, rc=%d, class=%u\n", rc, *class);
1381 /* vt8251 doesn't clear BSY on signature FIS reception,
1382 * request follow-up softreset.
1384 return online ? -EAGAIN : rc;
1387 static int ahci_p5wdh_hardreset(struct ata_link *link, unsigned int *class,
1388 unsigned long deadline)
1390 struct ata_port *ap = link->ap;
1391 struct ahci_port_priv *pp = ap->private_data;
1392 u8 *d2h_fis = pp->rx_fis + RX_FIS_D2H_REG;
1393 struct ata_taskfile tf;
1394 bool online;
1395 int rc;
1397 ahci_stop_engine(ap);
1399 /* clear D2H reception area to properly wait for D2H FIS */
1400 ata_tf_init(link->device, &tf);
1401 tf.command = 0x80;
1402 ata_tf_to_fis(&tf, 0, 0, d2h_fis);
1404 rc = sata_link_hardreset(link, sata_ehc_deb_timing(&link->eh_context),
1405 deadline, &online, NULL);
1407 ahci_start_engine(ap);
1409 /* The pseudo configuration device on SIMG4726 attached to
1410 * ASUS P5W-DH Deluxe doesn't send signature FIS after
1411 * hardreset if no device is attached to the first downstream
1412 * port && the pseudo device locks up on SRST w/ PMP==0. To
1413 * work around this, wait for !BSY only briefly. If BSY isn't
1414 * cleared, perform CLO and proceed to IDENTIFY (achieved by
1415 * ATA_LFLAG_NO_SRST and ATA_LFLAG_ASSUME_ATA).
1417 * Wait for two seconds. Devices attached to downstream port
1418 * which can't process the following IDENTIFY after this will
1419 * have to be reset again. For most cases, this should
1420 * suffice while making probing snappish enough.
1422 if (online) {
1423 rc = ata_wait_after_reset(link, jiffies + 2 * HZ,
1424 ahci_check_ready);
1425 if (rc)
1426 ahci_kick_engine(ap, 0);
1428 return rc;
1431 static void ahci_postreset(struct ata_link *link, unsigned int *class)
1433 struct ata_port *ap = link->ap;
1434 void __iomem *port_mmio = ahci_port_base(ap);
1435 u32 new_tmp, tmp;
1437 ata_std_postreset(link, class);
1439 /* Make sure port's ATAPI bit is set appropriately */
1440 new_tmp = tmp = readl(port_mmio + PORT_CMD);
1441 if (*class == ATA_DEV_ATAPI)
1442 new_tmp |= PORT_CMD_ATAPI;
1443 else
1444 new_tmp &= ~PORT_CMD_ATAPI;
1445 if (new_tmp != tmp) {
1446 writel(new_tmp, port_mmio + PORT_CMD);
1447 readl(port_mmio + PORT_CMD); /* flush */
1451 static unsigned int ahci_fill_sg(struct ata_queued_cmd *qc, void *cmd_tbl)
1453 struct scatterlist *sg;
1454 struct ahci_sg *ahci_sg = cmd_tbl + AHCI_CMD_TBL_HDR_SZ;
1455 unsigned int si;
1457 VPRINTK("ENTER\n");
1460 * Next, the S/G list.
1462 for_each_sg(qc->sg, sg, qc->n_elem, si) {
1463 dma_addr_t addr = sg_dma_address(sg);
1464 u32 sg_len = sg_dma_len(sg);
1466 ahci_sg[si].addr = cpu_to_le32(addr & 0xffffffff);
1467 ahci_sg[si].addr_hi = cpu_to_le32((addr >> 16) >> 16);
1468 ahci_sg[si].flags_size = cpu_to_le32(sg_len - 1);
1471 return si;
1474 static void ahci_qc_prep(struct ata_queued_cmd *qc)
1476 struct ata_port *ap = qc->ap;
1477 struct ahci_port_priv *pp = ap->private_data;
1478 int is_atapi = ata_is_atapi(qc->tf.protocol);
1479 void *cmd_tbl;
1480 u32 opts;
1481 const u32 cmd_fis_len = 5; /* five dwords */
1482 unsigned int n_elem;
1485 * Fill in command table information. First, the header,
1486 * a SATA Register - Host to Device command FIS.
1488 cmd_tbl = pp->cmd_tbl + qc->tag * AHCI_CMD_TBL_SZ;
1490 ata_tf_to_fis(&qc->tf, qc->dev->link->pmp, 1, cmd_tbl);
1491 if (is_atapi) {
1492 memset(cmd_tbl + AHCI_CMD_TBL_CDB, 0, 32);
1493 memcpy(cmd_tbl + AHCI_CMD_TBL_CDB, qc->cdb, qc->dev->cdb_len);
1496 n_elem = 0;
1497 if (qc->flags & ATA_QCFLAG_DMAMAP)
1498 n_elem = ahci_fill_sg(qc, cmd_tbl);
1501 * Fill in command slot information.
1503 opts = cmd_fis_len | n_elem << 16 | (qc->dev->link->pmp << 12);
1504 if (qc->tf.flags & ATA_TFLAG_WRITE)
1505 opts |= AHCI_CMD_WRITE;
1506 if (is_atapi)
1507 opts |= AHCI_CMD_ATAPI | AHCI_CMD_PREFETCH;
1509 ahci_fill_cmd_slot(pp, qc->tag, opts);
1512 static void ahci_error_intr(struct ata_port *ap, u32 irq_stat)
1514 struct ahci_host_priv *hpriv = ap->host->private_data;
1515 struct ahci_port_priv *pp = ap->private_data;
1516 struct ata_eh_info *host_ehi = &ap->link.eh_info;
1517 struct ata_link *link = NULL;
1518 struct ata_queued_cmd *active_qc;
1519 struct ata_eh_info *active_ehi;
1520 u32 serror;
1522 /* determine active link */
1523 ata_port_for_each_link(link, ap)
1524 if (ata_link_active(link))
1525 break;
1526 if (!link)
1527 link = &ap->link;
1529 active_qc = ata_qc_from_tag(ap, link->active_tag);
1530 active_ehi = &link->eh_info;
1532 /* record irq stat */
1533 ata_ehi_clear_desc(host_ehi);
1534 ata_ehi_push_desc(host_ehi, "irq_stat 0x%08x", irq_stat);
1536 /* AHCI needs SError cleared; otherwise, it might lock up */
1537 ahci_scr_read(ap, SCR_ERROR, &serror);
1538 ahci_scr_write(ap, SCR_ERROR, serror);
1539 host_ehi->serror |= serror;
1541 /* some controllers set IRQ_IF_ERR on device errors, ignore it */
1542 if (hpriv->flags & AHCI_HFLAG_IGN_IRQ_IF_ERR)
1543 irq_stat &= ~PORT_IRQ_IF_ERR;
1545 if (irq_stat & PORT_IRQ_TF_ERR) {
1546 /* If qc is active, charge it; otherwise, the active
1547 * link. There's no active qc on NCQ errors. It will
1548 * be determined by EH by reading log page 10h.
1550 if (active_qc)
1551 active_qc->err_mask |= AC_ERR_DEV;
1552 else
1553 active_ehi->err_mask |= AC_ERR_DEV;
1555 if (hpriv->flags & AHCI_HFLAG_IGN_SERR_INTERNAL)
1556 host_ehi->serror &= ~SERR_INTERNAL;
1559 if (irq_stat & PORT_IRQ_UNK_FIS) {
1560 u32 *unk = (u32 *)(pp->rx_fis + RX_FIS_UNK);
1562 active_ehi->err_mask |= AC_ERR_HSM;
1563 active_ehi->action |= ATA_EH_RESET;
1564 ata_ehi_push_desc(active_ehi,
1565 "unknown FIS %08x %08x %08x %08x" ,
1566 unk[0], unk[1], unk[2], unk[3]);
1569 if (sata_pmp_attached(ap) && (irq_stat & PORT_IRQ_BAD_PMP)) {
1570 active_ehi->err_mask |= AC_ERR_HSM;
1571 active_ehi->action |= ATA_EH_RESET;
1572 ata_ehi_push_desc(active_ehi, "incorrect PMP");
1575 if (irq_stat & (PORT_IRQ_HBUS_ERR | PORT_IRQ_HBUS_DATA_ERR)) {
1576 host_ehi->err_mask |= AC_ERR_HOST_BUS;
1577 host_ehi->action |= ATA_EH_RESET;
1578 ata_ehi_push_desc(host_ehi, "host bus error");
1581 if (irq_stat & PORT_IRQ_IF_ERR) {
1582 host_ehi->err_mask |= AC_ERR_ATA_BUS;
1583 host_ehi->action |= ATA_EH_RESET;
1584 ata_ehi_push_desc(host_ehi, "interface fatal error");
1587 if (irq_stat & (PORT_IRQ_CONNECT | PORT_IRQ_PHYRDY)) {
1588 ata_ehi_hotplugged(host_ehi);
1589 ata_ehi_push_desc(host_ehi, "%s",
1590 irq_stat & PORT_IRQ_CONNECT ?
1591 "connection status changed" : "PHY RDY changed");
1594 /* okay, let's hand over to EH */
1596 if (irq_stat & PORT_IRQ_FREEZE)
1597 ata_port_freeze(ap);
1598 else
1599 ata_port_abort(ap);
1602 static void ahci_port_intr(struct ata_port *ap)
1604 void __iomem *port_mmio = ahci_port_base(ap);
1605 struct ata_eh_info *ehi = &ap->link.eh_info;
1606 struct ahci_port_priv *pp = ap->private_data;
1607 struct ahci_host_priv *hpriv = ap->host->private_data;
1608 int resetting = !!(ap->pflags & ATA_PFLAG_RESETTING);
1609 u32 status, qc_active;
1610 int rc;
1612 status = readl(port_mmio + PORT_IRQ_STAT);
1613 writel(status, port_mmio + PORT_IRQ_STAT);
1615 /* ignore BAD_PMP while resetting */
1616 if (unlikely(resetting))
1617 status &= ~PORT_IRQ_BAD_PMP;
1619 /* If we are getting PhyRdy, this is
1620 * just a power state change, we should
1621 * clear out this, plus the PhyRdy/Comm
1622 * Wake bits from Serror
1624 if ((hpriv->flags & AHCI_HFLAG_NO_HOTPLUG) &&
1625 (status & PORT_IRQ_PHYRDY)) {
1626 status &= ~PORT_IRQ_PHYRDY;
1627 ahci_scr_write(ap, SCR_ERROR, ((1 << 16) | (1 << 18)));
1630 if (unlikely(status & PORT_IRQ_ERROR)) {
1631 ahci_error_intr(ap, status);
1632 return;
1635 if (status & PORT_IRQ_SDB_FIS) {
1636 /* If SNotification is available, leave notification
1637 * handling to sata_async_notification(). If not,
1638 * emulate it by snooping SDB FIS RX area.
1640 * Snooping FIS RX area is probably cheaper than
1641 * poking SNotification but some constrollers which
1642 * implement SNotification, ICH9 for example, don't
1643 * store AN SDB FIS into receive area.
1645 if (hpriv->cap & HOST_CAP_SNTF)
1646 sata_async_notification(ap);
1647 else {
1648 /* If the 'N' bit in word 0 of the FIS is set,
1649 * we just received asynchronous notification.
1650 * Tell libata about it.
1652 const __le32 *f = pp->rx_fis + RX_FIS_SDB;
1653 u32 f0 = le32_to_cpu(f[0]);
1655 if (f0 & (1 << 15))
1656 sata_async_notification(ap);
1660 /* pp->active_link is valid iff any command is in flight */
1661 if (ap->qc_active && pp->active_link->sactive)
1662 qc_active = readl(port_mmio + PORT_SCR_ACT);
1663 else
1664 qc_active = readl(port_mmio + PORT_CMD_ISSUE);
1666 rc = ata_qc_complete_multiple(ap, qc_active);
1668 /* while resetting, invalid completions are expected */
1669 if (unlikely(rc < 0 && !resetting)) {
1670 ehi->err_mask |= AC_ERR_HSM;
1671 ehi->action |= ATA_EH_RESET;
1672 ata_port_freeze(ap);
1676 static irqreturn_t ahci_interrupt(int irq, void *dev_instance)
1678 struct ata_host *host = dev_instance;
1679 struct ahci_host_priv *hpriv;
1680 unsigned int i, handled = 0;
1681 void __iomem *mmio;
1682 u32 irq_stat, irq_ack = 0;
1684 VPRINTK("ENTER\n");
1686 hpriv = host->private_data;
1687 mmio = host->iomap[AHCI_PCI_BAR];
1689 /* sigh. 0xffffffff is a valid return from h/w */
1690 irq_stat = readl(mmio + HOST_IRQ_STAT);
1691 irq_stat &= hpriv->port_map;
1692 if (!irq_stat)
1693 return IRQ_NONE;
1695 spin_lock(&host->lock);
1697 for (i = 0; i < host->n_ports; i++) {
1698 struct ata_port *ap;
1700 if (!(irq_stat & (1 << i)))
1701 continue;
1703 ap = host->ports[i];
1704 if (ap) {
1705 ahci_port_intr(ap);
1706 VPRINTK("port %u\n", i);
1707 } else {
1708 VPRINTK("port %u (no irq)\n", i);
1709 if (ata_ratelimit())
1710 dev_printk(KERN_WARNING, host->dev,
1711 "interrupt on disabled port %u\n", i);
1714 irq_ack |= (1 << i);
1717 if (irq_ack) {
1718 writel(irq_ack, mmio + HOST_IRQ_STAT);
1719 handled = 1;
1722 spin_unlock(&host->lock);
1724 VPRINTK("EXIT\n");
1726 return IRQ_RETVAL(handled);
1729 static unsigned int ahci_qc_issue(struct ata_queued_cmd *qc)
1731 struct ata_port *ap = qc->ap;
1732 void __iomem *port_mmio = ahci_port_base(ap);
1733 struct ahci_port_priv *pp = ap->private_data;
1735 /* Keep track of the currently active link. It will be used
1736 * in completion path to determine whether NCQ phase is in
1737 * progress.
1739 pp->active_link = qc->dev->link;
1741 if (qc->tf.protocol == ATA_PROT_NCQ)
1742 writel(1 << qc->tag, port_mmio + PORT_SCR_ACT);
1743 writel(1 << qc->tag, port_mmio + PORT_CMD_ISSUE);
1744 readl(port_mmio + PORT_CMD_ISSUE); /* flush */
1746 return 0;
1749 static bool ahci_qc_fill_rtf(struct ata_queued_cmd *qc)
1751 struct ahci_port_priv *pp = qc->ap->private_data;
1752 u8 *d2h_fis = pp->rx_fis + RX_FIS_D2H_REG;
1754 ata_tf_from_fis(d2h_fis, &qc->result_tf);
1755 return true;
1758 static void ahci_freeze(struct ata_port *ap)
1760 void __iomem *port_mmio = ahci_port_base(ap);
1762 /* turn IRQ off */
1763 writel(0, port_mmio + PORT_IRQ_MASK);
1766 static void ahci_thaw(struct ata_port *ap)
1768 void __iomem *mmio = ap->host->iomap[AHCI_PCI_BAR];
1769 void __iomem *port_mmio = ahci_port_base(ap);
1770 u32 tmp;
1771 struct ahci_port_priv *pp = ap->private_data;
1773 /* clear IRQ */
1774 tmp = readl(port_mmio + PORT_IRQ_STAT);
1775 writel(tmp, port_mmio + PORT_IRQ_STAT);
1776 writel(1 << ap->port_no, mmio + HOST_IRQ_STAT);
1778 /* turn IRQ back on */
1779 writel(pp->intr_mask, port_mmio + PORT_IRQ_MASK);
1782 static void ahci_error_handler(struct ata_port *ap)
1784 if (!(ap->pflags & ATA_PFLAG_FROZEN)) {
1785 /* restart engine */
1786 ahci_stop_engine(ap);
1787 ahci_start_engine(ap);
1790 sata_pmp_error_handler(ap);
1793 static void ahci_post_internal_cmd(struct ata_queued_cmd *qc)
1795 struct ata_port *ap = qc->ap;
1797 /* make DMA engine forget about the failed command */
1798 if (qc->flags & ATA_QCFLAG_FAILED)
1799 ahci_kick_engine(ap, 1);
1802 static void ahci_pmp_attach(struct ata_port *ap)
1804 void __iomem *port_mmio = ahci_port_base(ap);
1805 struct ahci_port_priv *pp = ap->private_data;
1806 u32 cmd;
1808 cmd = readl(port_mmio + PORT_CMD);
1809 cmd |= PORT_CMD_PMP;
1810 writel(cmd, port_mmio + PORT_CMD);
1812 pp->intr_mask |= PORT_IRQ_BAD_PMP;
1813 writel(pp->intr_mask, port_mmio + PORT_IRQ_MASK);
1816 static void ahci_pmp_detach(struct ata_port *ap)
1818 void __iomem *port_mmio = ahci_port_base(ap);
1819 struct ahci_port_priv *pp = ap->private_data;
1820 u32 cmd;
1822 cmd = readl(port_mmio + PORT_CMD);
1823 cmd &= ~PORT_CMD_PMP;
1824 writel(cmd, port_mmio + PORT_CMD);
1826 pp->intr_mask &= ~PORT_IRQ_BAD_PMP;
1827 writel(pp->intr_mask, port_mmio + PORT_IRQ_MASK);
1830 static int ahci_port_resume(struct ata_port *ap)
1832 ahci_power_up(ap);
1833 ahci_start_port(ap);
1835 if (sata_pmp_attached(ap))
1836 ahci_pmp_attach(ap);
1837 else
1838 ahci_pmp_detach(ap);
1840 return 0;
1843 #ifdef CONFIG_PM
1844 static int ahci_port_suspend(struct ata_port *ap, pm_message_t mesg)
1846 const char *emsg = NULL;
1847 int rc;
1849 rc = ahci_deinit_port(ap, &emsg);
1850 if (rc == 0)
1851 ahci_power_down(ap);
1852 else {
1853 ata_port_printk(ap, KERN_ERR, "%s (%d)\n", emsg, rc);
1854 ahci_start_port(ap);
1857 return rc;
1860 static int ahci_pci_device_suspend(struct pci_dev *pdev, pm_message_t mesg)
1862 struct ata_host *host = dev_get_drvdata(&pdev->dev);
1863 void __iomem *mmio = host->iomap[AHCI_PCI_BAR];
1864 u32 ctl;
1866 if (mesg.event & PM_EVENT_SLEEP) {
1867 /* AHCI spec rev1.1 section 8.3.3:
1868 * Software must disable interrupts prior to requesting a
1869 * transition of the HBA to D3 state.
1871 ctl = readl(mmio + HOST_CTL);
1872 ctl &= ~HOST_IRQ_EN;
1873 writel(ctl, mmio + HOST_CTL);
1874 readl(mmio + HOST_CTL); /* flush */
1877 return ata_pci_device_suspend(pdev, mesg);
1880 static int ahci_pci_device_resume(struct pci_dev *pdev)
1882 struct ata_host *host = dev_get_drvdata(&pdev->dev);
1883 int rc;
1885 rc = ata_pci_device_do_resume(pdev);
1886 if (rc)
1887 return rc;
1889 if (pdev->dev.power.power_state.event == PM_EVENT_SUSPEND) {
1890 rc = ahci_reset_controller(host);
1891 if (rc)
1892 return rc;
1894 ahci_init_controller(host);
1897 ata_host_resume(host);
1899 return 0;
1901 #endif
1903 static int ahci_port_start(struct ata_port *ap)
1905 struct device *dev = ap->host->dev;
1906 struct ahci_port_priv *pp;
1907 void *mem;
1908 dma_addr_t mem_dma;
1910 pp = devm_kzalloc(dev, sizeof(*pp), GFP_KERNEL);
1911 if (!pp)
1912 return -ENOMEM;
1914 mem = dmam_alloc_coherent(dev, AHCI_PORT_PRIV_DMA_SZ, &mem_dma,
1915 GFP_KERNEL);
1916 if (!mem)
1917 return -ENOMEM;
1918 memset(mem, 0, AHCI_PORT_PRIV_DMA_SZ);
1921 * First item in chunk of DMA memory: 32-slot command table,
1922 * 32 bytes each in size
1924 pp->cmd_slot = mem;
1925 pp->cmd_slot_dma = mem_dma;
1927 mem += AHCI_CMD_SLOT_SZ;
1928 mem_dma += AHCI_CMD_SLOT_SZ;
1931 * Second item: Received-FIS area
1933 pp->rx_fis = mem;
1934 pp->rx_fis_dma = mem_dma;
1936 mem += AHCI_RX_FIS_SZ;
1937 mem_dma += AHCI_RX_FIS_SZ;
1940 * Third item: data area for storing a single command
1941 * and its scatter-gather table
1943 pp->cmd_tbl = mem;
1944 pp->cmd_tbl_dma = mem_dma;
1947 * Save off initial list of interrupts to be enabled.
1948 * This could be changed later
1950 pp->intr_mask = DEF_PORT_IRQ;
1952 ap->private_data = pp;
1954 /* engage engines, captain */
1955 return ahci_port_resume(ap);
1958 static void ahci_port_stop(struct ata_port *ap)
1960 const char *emsg = NULL;
1961 int rc;
1963 /* de-initialize port */
1964 rc = ahci_deinit_port(ap, &emsg);
1965 if (rc)
1966 ata_port_printk(ap, KERN_WARNING, "%s (%d)\n", emsg, rc);
1969 static int ahci_configure_dma_masks(struct pci_dev *pdev, int using_dac)
1971 int rc;
1973 if (using_dac &&
1974 !pci_set_dma_mask(pdev, DMA_64BIT_MASK)) {
1975 rc = pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK);
1976 if (rc) {
1977 rc = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK);
1978 if (rc) {
1979 dev_printk(KERN_ERR, &pdev->dev,
1980 "64-bit DMA enable failed\n");
1981 return rc;
1984 } else {
1985 rc = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
1986 if (rc) {
1987 dev_printk(KERN_ERR, &pdev->dev,
1988 "32-bit DMA enable failed\n");
1989 return rc;
1991 rc = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK);
1992 if (rc) {
1993 dev_printk(KERN_ERR, &pdev->dev,
1994 "32-bit consistent DMA enable failed\n");
1995 return rc;
1998 return 0;
2001 static void ahci_print_info(struct ata_host *host)
2003 struct ahci_host_priv *hpriv = host->private_data;
2004 struct pci_dev *pdev = to_pci_dev(host->dev);
2005 void __iomem *mmio = host->iomap[AHCI_PCI_BAR];
2006 u32 vers, cap, impl, speed;
2007 const char *speed_s;
2008 u16 cc;
2009 const char *scc_s;
2011 vers = readl(mmio + HOST_VERSION);
2012 cap = hpriv->cap;
2013 impl = hpriv->port_map;
2015 speed = (cap >> 20) & 0xf;
2016 if (speed == 1)
2017 speed_s = "1.5";
2018 else if (speed == 2)
2019 speed_s = "3";
2020 else
2021 speed_s = "?";
2023 pci_read_config_word(pdev, 0x0a, &cc);
2024 if (cc == PCI_CLASS_STORAGE_IDE)
2025 scc_s = "IDE";
2026 else if (cc == PCI_CLASS_STORAGE_SATA)
2027 scc_s = "SATA";
2028 else if (cc == PCI_CLASS_STORAGE_RAID)
2029 scc_s = "RAID";
2030 else
2031 scc_s = "unknown";
2033 dev_printk(KERN_INFO, &pdev->dev,
2034 "AHCI %02x%02x.%02x%02x "
2035 "%u slots %u ports %s Gbps 0x%x impl %s mode\n"
2038 (vers >> 24) & 0xff,
2039 (vers >> 16) & 0xff,
2040 (vers >> 8) & 0xff,
2041 vers & 0xff,
2043 ((cap >> 8) & 0x1f) + 1,
2044 (cap & 0x1f) + 1,
2045 speed_s,
2046 impl,
2047 scc_s);
2049 dev_printk(KERN_INFO, &pdev->dev,
2050 "flags: "
2051 "%s%s%s%s%s%s%s"
2052 "%s%s%s%s%s%s%s\n"
2055 cap & (1 << 31) ? "64bit " : "",
2056 cap & (1 << 30) ? "ncq " : "",
2057 cap & (1 << 29) ? "sntf " : "",
2058 cap & (1 << 28) ? "ilck " : "",
2059 cap & (1 << 27) ? "stag " : "",
2060 cap & (1 << 26) ? "pm " : "",
2061 cap & (1 << 25) ? "led " : "",
2063 cap & (1 << 24) ? "clo " : "",
2064 cap & (1 << 19) ? "nz " : "",
2065 cap & (1 << 18) ? "only " : "",
2066 cap & (1 << 17) ? "pmp " : "",
2067 cap & (1 << 15) ? "pio " : "",
2068 cap & (1 << 14) ? "slum " : "",
2069 cap & (1 << 13) ? "part " : ""
2073 /* On ASUS P5W DH Deluxe, the second port of PCI device 00:1f.2 is
2074 * hardwired to on-board SIMG 4726. The chipset is ICH8 and doesn't
2075 * support PMP and the 4726 either directly exports the device
2076 * attached to the first downstream port or acts as a hardware storage
2077 * controller and emulate a single ATA device (can be RAID 0/1 or some
2078 * other configuration).
2080 * When there's no device attached to the first downstream port of the
2081 * 4726, "Config Disk" appears, which is a pseudo ATA device to
2082 * configure the 4726. However, ATA emulation of the device is very
2083 * lame. It doesn't send signature D2H Reg FIS after the initial
2084 * hardreset, pukes on SRST w/ PMP==0 and has bunch of other issues.
2086 * The following function works around the problem by always using
2087 * hardreset on the port and not depending on receiving signature FIS
2088 * afterward. If signature FIS isn't received soon, ATA class is
2089 * assumed without follow-up softreset.
2091 static void ahci_p5wdh_workaround(struct ata_host *host)
2093 static struct dmi_system_id sysids[] = {
2095 .ident = "P5W DH Deluxe",
2096 .matches = {
2097 DMI_MATCH(DMI_SYS_VENDOR,
2098 "ASUSTEK COMPUTER INC"),
2099 DMI_MATCH(DMI_PRODUCT_NAME, "P5W DH Deluxe"),
2104 struct pci_dev *pdev = to_pci_dev(host->dev);
2106 if (pdev->bus->number == 0 && pdev->devfn == PCI_DEVFN(0x1f, 2) &&
2107 dmi_check_system(sysids)) {
2108 struct ata_port *ap = host->ports[1];
2110 dev_printk(KERN_INFO, &pdev->dev, "enabling ASUS P5W DH "
2111 "Deluxe on-board SIMG4726 workaround\n");
2113 ap->ops = &ahci_p5wdh_ops;
2114 ap->link.flags |= ATA_LFLAG_NO_SRST | ATA_LFLAG_ASSUME_ATA;
2118 static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
2120 static int printed_version;
2121 struct ata_port_info pi = ahci_port_info[ent->driver_data];
2122 const struct ata_port_info *ppi[] = { &pi, NULL };
2123 struct device *dev = &pdev->dev;
2124 struct ahci_host_priv *hpriv;
2125 struct ata_host *host;
2126 int n_ports, i, rc;
2128 VPRINTK("ENTER\n");
2130 WARN_ON(ATA_MAX_QUEUE > AHCI_MAX_CMDS);
2132 if (!printed_version++)
2133 dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n");
2135 /* acquire resources */
2136 rc = pcim_enable_device(pdev);
2137 if (rc)
2138 return rc;
2140 /* AHCI controllers often implement SFF compatible interface.
2141 * Grab all PCI BARs just in case.
2143 rc = pcim_iomap_regions_request_all(pdev, 1 << AHCI_PCI_BAR, DRV_NAME);
2144 if (rc == -EBUSY)
2145 pcim_pin_device(pdev);
2146 if (rc)
2147 return rc;
2149 if (pdev->vendor == PCI_VENDOR_ID_INTEL &&
2150 (pdev->device == 0x2652 || pdev->device == 0x2653)) {
2151 u8 map;
2153 /* ICH6s share the same PCI ID for both piix and ahci
2154 * modes. Enabling ahci mode while MAP indicates
2155 * combined mode is a bad idea. Yield to ata_piix.
2157 pci_read_config_byte(pdev, ICH_MAP, &map);
2158 if (map & 0x3) {
2159 dev_printk(KERN_INFO, &pdev->dev, "controller is in "
2160 "combined mode, can't enable AHCI mode\n");
2161 return -ENODEV;
2165 hpriv = devm_kzalloc(dev, sizeof(*hpriv), GFP_KERNEL);
2166 if (!hpriv)
2167 return -ENOMEM;
2168 hpriv->flags |= (unsigned long)pi.private_data;
2170 if ((hpriv->flags & AHCI_HFLAG_NO_MSI) || pci_enable_msi(pdev))
2171 pci_intx(pdev, 1);
2173 /* save initial config */
2174 ahci_save_initial_config(pdev, hpriv);
2176 /* prepare host */
2177 if (hpriv->cap & HOST_CAP_NCQ)
2178 pi.flags |= ATA_FLAG_NCQ;
2180 if (hpriv->cap & HOST_CAP_PMP)
2181 pi.flags |= ATA_FLAG_PMP;
2183 /* CAP.NP sometimes indicate the index of the last enabled
2184 * port, at other times, that of the last possible port, so
2185 * determining the maximum port number requires looking at
2186 * both CAP.NP and port_map.
2188 n_ports = max(ahci_nr_ports(hpriv->cap), fls(hpriv->port_map));
2190 host = ata_host_alloc_pinfo(&pdev->dev, ppi, n_ports);
2191 if (!host)
2192 return -ENOMEM;
2193 host->iomap = pcim_iomap_table(pdev);
2194 host->private_data = hpriv;
2196 for (i = 0; i < host->n_ports; i++) {
2197 struct ata_port *ap = host->ports[i];
2199 ata_port_pbar_desc(ap, AHCI_PCI_BAR, -1, "abar");
2200 ata_port_pbar_desc(ap, AHCI_PCI_BAR,
2201 0x100 + ap->port_no * 0x80, "port");
2203 /* set initial link pm policy */
2204 ap->pm_policy = NOT_AVAILABLE;
2206 /* disabled/not-implemented port */
2207 if (!(hpriv->port_map & (1 << i)))
2208 ap->ops = &ata_dummy_port_ops;
2211 /* apply workaround for ASUS P5W DH Deluxe mainboard */
2212 ahci_p5wdh_workaround(host);
2214 /* initialize adapter */
2215 rc = ahci_configure_dma_masks(pdev, hpriv->cap & HOST_CAP_64);
2216 if (rc)
2217 return rc;
2219 rc = ahci_reset_controller(host);
2220 if (rc)
2221 return rc;
2223 ahci_init_controller(host);
2224 ahci_print_info(host);
2226 pci_set_master(pdev);
2227 return ata_host_activate(host, pdev->irq, ahci_interrupt, IRQF_SHARED,
2228 &ahci_sht);
2231 static int __init ahci_init(void)
2233 return pci_register_driver(&ahci_pci_driver);
2236 static void __exit ahci_exit(void)
2238 pci_unregister_driver(&ahci_pci_driver);
2242 MODULE_AUTHOR("Jeff Garzik");
2243 MODULE_DESCRIPTION("AHCI SATA low-level driver");
2244 MODULE_LICENSE("GPL");
2245 MODULE_DEVICE_TABLE(pci, ahci_pci_tbl);
2246 MODULE_VERSION(DRV_VERSION);
2248 module_init(ahci_init);
2249 module_exit(ahci_exit);