gpio: move U300 GPIO driver to drivers/gpio
[linux-2.6/libata-dev.git] / drivers / video / s3fb.c
blob4ca5d0c8fe84a6501ca6ef4f31898c0babac2725
1 /*
2 * linux/drivers/video/s3fb.c -- Frame buffer device driver for S3 Trio/Virge
4 * Copyright (c) 2006-2007 Ondrej Zajicek <santiago@crfreenet.org>
6 * This file is subject to the terms and conditions of the GNU General Public
7 * License. See the file COPYING in the main directory of this archive for
8 * more details.
10 * Code is based on David Boucher's viafb (http://davesdomain.org.uk/viafb/)
11 * which is based on the code of neofb.
14 #include <linux/module.h>
15 #include <linux/kernel.h>
16 #include <linux/errno.h>
17 #include <linux/string.h>
18 #include <linux/mm.h>
19 #include <linux/tty.h>
20 #include <linux/delay.h>
21 #include <linux/fb.h>
22 #include <linux/svga.h>
23 #include <linux/init.h>
24 #include <linux/pci.h>
25 #include <linux/console.h> /* Why should fb driver call console functions? because console_lock() */
26 #include <video/vga.h>
28 #include <linux/i2c.h>
29 #include <linux/i2c-algo-bit.h>
31 #ifdef CONFIG_MTRR
32 #include <asm/mtrr.h>
33 #endif
35 struct s3fb_info {
36 int chip, rev, mclk_freq;
37 int mtrr_reg;
38 struct vgastate state;
39 struct mutex open_lock;
40 unsigned int ref_count;
41 u32 pseudo_palette[16];
42 #ifdef CONFIG_FB_S3_DDC
43 u8 __iomem *mmio;
44 bool ddc_registered;
45 struct i2c_adapter ddc_adapter;
46 struct i2c_algo_bit_data ddc_algo;
47 #endif
51 /* ------------------------------------------------------------------------- */
53 static const struct svga_fb_format s3fb_formats[] = {
54 { 0, {0, 6, 0}, {0, 6, 0}, {0, 6, 0}, {0, 0, 0}, 0,
55 FB_TYPE_TEXT, FB_AUX_TEXT_SVGA_STEP4, FB_VISUAL_PSEUDOCOLOR, 8, 16},
56 { 4, {0, 4, 0}, {0, 4, 0}, {0, 4, 0}, {0, 0, 0}, 0,
57 FB_TYPE_PACKED_PIXELS, 0, FB_VISUAL_PSEUDOCOLOR, 8, 16},
58 { 4, {0, 4, 0}, {0, 4, 0}, {0, 4, 0}, {0, 0, 0}, 1,
59 FB_TYPE_INTERLEAVED_PLANES, 1, FB_VISUAL_PSEUDOCOLOR, 8, 16},
60 { 8, {0, 8, 0}, {0, 8, 0}, {0, 8, 0}, {0, 0, 0}, 0,
61 FB_TYPE_PACKED_PIXELS, 0, FB_VISUAL_PSEUDOCOLOR, 4, 8},
62 {16, {10, 5, 0}, {5, 5, 0}, {0, 5, 0}, {0, 0, 0}, 0,
63 FB_TYPE_PACKED_PIXELS, 0, FB_VISUAL_TRUECOLOR, 2, 4},
64 {16, {11, 5, 0}, {5, 6, 0}, {0, 5, 0}, {0, 0, 0}, 0,
65 FB_TYPE_PACKED_PIXELS, 0, FB_VISUAL_TRUECOLOR, 2, 4},
66 {24, {16, 8, 0}, {8, 8, 0}, {0, 8, 0}, {0, 0, 0}, 0,
67 FB_TYPE_PACKED_PIXELS, 0, FB_VISUAL_TRUECOLOR, 1, 2},
68 {32, {16, 8, 0}, {8, 8, 0}, {0, 8, 0}, {0, 0, 0}, 0,
69 FB_TYPE_PACKED_PIXELS, 0, FB_VISUAL_TRUECOLOR, 1, 2},
70 SVGA_FORMAT_END
74 static const struct svga_pll s3_pll = {3, 129, 3, 33, 0, 3,
75 35000, 240000, 14318};
76 static const struct svga_pll s3_trio3d_pll = {3, 129, 3, 31, 0, 4,
77 230000, 460000, 14318};
79 static const int s3_memsizes[] = {4096, 0, 3072, 8192, 2048, 6144, 1024, 512};
81 static const char * const s3_names[] = {"S3 Unknown", "S3 Trio32", "S3 Trio64", "S3 Trio64V+",
82 "S3 Trio64UV+", "S3 Trio64V2/DX", "S3 Trio64V2/GX",
83 "S3 Plato/PX", "S3 Aurora64V+", "S3 Virge",
84 "S3 Virge/VX", "S3 Virge/DX", "S3 Virge/GX",
85 "S3 Virge/GX2", "S3 Virge/GX2+", "",
86 "S3 Trio3D/1X", "S3 Trio3D/2X", "S3 Trio3D/2X",
87 "S3 Trio3D"};
89 #define CHIP_UNKNOWN 0x00
90 #define CHIP_732_TRIO32 0x01
91 #define CHIP_764_TRIO64 0x02
92 #define CHIP_765_TRIO64VP 0x03
93 #define CHIP_767_TRIO64UVP 0x04
94 #define CHIP_775_TRIO64V2_DX 0x05
95 #define CHIP_785_TRIO64V2_GX 0x06
96 #define CHIP_551_PLATO_PX 0x07
97 #define CHIP_M65_AURORA64VP 0x08
98 #define CHIP_325_VIRGE 0x09
99 #define CHIP_988_VIRGE_VX 0x0A
100 #define CHIP_375_VIRGE_DX 0x0B
101 #define CHIP_385_VIRGE_GX 0x0C
102 #define CHIP_357_VIRGE_GX2 0x0D
103 #define CHIP_359_VIRGE_GX2P 0x0E
104 #define CHIP_360_TRIO3D_1X 0x10
105 #define CHIP_362_TRIO3D_2X 0x11
106 #define CHIP_368_TRIO3D_2X 0x12
107 #define CHIP_365_TRIO3D 0x13
109 #define CHIP_XXX_TRIO 0x80
110 #define CHIP_XXX_TRIO64V2_DXGX 0x81
111 #define CHIP_XXX_VIRGE_DXGX 0x82
112 #define CHIP_36X_TRIO3D_1X_2X 0x83
114 #define CHIP_UNDECIDED_FLAG 0x80
115 #define CHIP_MASK 0xFF
117 #define MMIO_OFFSET 0x1000000
118 #define MMIO_SIZE 0x10000
120 /* CRT timing register sets */
122 static const struct vga_regset s3_h_total_regs[] = {{0x00, 0, 7}, {0x5D, 0, 0}, VGA_REGSET_END};
123 static const struct vga_regset s3_h_display_regs[] = {{0x01, 0, 7}, {0x5D, 1, 1}, VGA_REGSET_END};
124 static const struct vga_regset s3_h_blank_start_regs[] = {{0x02, 0, 7}, {0x5D, 2, 2}, VGA_REGSET_END};
125 static const struct vga_regset s3_h_blank_end_regs[] = {{0x03, 0, 4}, {0x05, 7, 7}, VGA_REGSET_END};
126 static const struct vga_regset s3_h_sync_start_regs[] = {{0x04, 0, 7}, {0x5D, 4, 4}, VGA_REGSET_END};
127 static const struct vga_regset s3_h_sync_end_regs[] = {{0x05, 0, 4}, VGA_REGSET_END};
129 static const struct vga_regset s3_v_total_regs[] = {{0x06, 0, 7}, {0x07, 0, 0}, {0x07, 5, 5}, {0x5E, 0, 0}, VGA_REGSET_END};
130 static const struct vga_regset s3_v_display_regs[] = {{0x12, 0, 7}, {0x07, 1, 1}, {0x07, 6, 6}, {0x5E, 1, 1}, VGA_REGSET_END};
131 static const struct vga_regset s3_v_blank_start_regs[] = {{0x15, 0, 7}, {0x07, 3, 3}, {0x09, 5, 5}, {0x5E, 2, 2}, VGA_REGSET_END};
132 static const struct vga_regset s3_v_blank_end_regs[] = {{0x16, 0, 7}, VGA_REGSET_END};
133 static const struct vga_regset s3_v_sync_start_regs[] = {{0x10, 0, 7}, {0x07, 2, 2}, {0x07, 7, 7}, {0x5E, 4, 4}, VGA_REGSET_END};
134 static const struct vga_regset s3_v_sync_end_regs[] = {{0x11, 0, 3}, VGA_REGSET_END};
136 static const struct vga_regset s3_line_compare_regs[] = {{0x18, 0, 7}, {0x07, 4, 4}, {0x09, 6, 6}, {0x5E, 6, 6}, VGA_REGSET_END};
137 static const struct vga_regset s3_start_address_regs[] = {{0x0d, 0, 7}, {0x0c, 0, 7}, {0x69, 0, 4}, VGA_REGSET_END};
138 static const struct vga_regset s3_offset_regs[] = {{0x13, 0, 7}, {0x51, 4, 5}, VGA_REGSET_END}; /* set 0x43 bit 2 to 0 */
140 static const struct vga_regset s3_dtpc_regs[] = {{0x3B, 0, 7}, {0x5D, 6, 6}, VGA_REGSET_END};
142 static const struct svga_timing_regs s3_timing_regs = {
143 s3_h_total_regs, s3_h_display_regs, s3_h_blank_start_regs,
144 s3_h_blank_end_regs, s3_h_sync_start_regs, s3_h_sync_end_regs,
145 s3_v_total_regs, s3_v_display_regs, s3_v_blank_start_regs,
146 s3_v_blank_end_regs, s3_v_sync_start_regs, s3_v_sync_end_regs,
150 /* ------------------------------------------------------------------------- */
152 /* Module parameters */
155 static char *mode_option __devinitdata;
157 #ifdef CONFIG_MTRR
158 static int mtrr __devinitdata = 1;
159 #endif
161 static int fasttext = 1;
164 MODULE_AUTHOR("(c) 2006-2007 Ondrej Zajicek <santiago@crfreenet.org>");
165 MODULE_LICENSE("GPL");
166 MODULE_DESCRIPTION("fbdev driver for S3 Trio/Virge");
168 module_param(mode_option, charp, 0444);
169 MODULE_PARM_DESC(mode_option, "Default video mode ('640x480-8@60', etc)");
170 module_param_named(mode, mode_option, charp, 0444);
171 MODULE_PARM_DESC(mode, "Default video mode ('640x480-8@60', etc) (deprecated)");
173 #ifdef CONFIG_MTRR
174 module_param(mtrr, int, 0444);
175 MODULE_PARM_DESC(mtrr, "Enable write-combining with MTRR (1=enable, 0=disable, default=1)");
176 #endif
178 module_param(fasttext, int, 0644);
179 MODULE_PARM_DESC(fasttext, "Enable S3 fast text mode (1=enable, 0=disable, default=1)");
182 /* ------------------------------------------------------------------------- */
184 #ifdef CONFIG_FB_S3_DDC
186 #define DDC_REG 0xaa /* Trio 3D/1X/2X */
187 #define DDC_MMIO_REG 0xff20 /* all other chips */
188 #define DDC_SCL_OUT (1 << 0)
189 #define DDC_SDA_OUT (1 << 1)
190 #define DDC_SCL_IN (1 << 2)
191 #define DDC_SDA_IN (1 << 3)
192 #define DDC_DRIVE_EN (1 << 4)
194 static bool s3fb_ddc_needs_mmio(int chip)
196 return !(chip == CHIP_360_TRIO3D_1X ||
197 chip == CHIP_362_TRIO3D_2X ||
198 chip == CHIP_368_TRIO3D_2X);
201 static u8 s3fb_ddc_read(struct s3fb_info *par)
203 if (s3fb_ddc_needs_mmio(par->chip))
204 return readb(par->mmio + DDC_MMIO_REG);
205 else
206 return vga_rcrt(par->state.vgabase, DDC_REG);
209 static void s3fb_ddc_write(struct s3fb_info *par, u8 val)
211 if (s3fb_ddc_needs_mmio(par->chip))
212 writeb(val, par->mmio + DDC_MMIO_REG);
213 else
214 vga_wcrt(par->state.vgabase, DDC_REG, val);
217 static void s3fb_ddc_setscl(void *data, int val)
219 struct s3fb_info *par = data;
220 unsigned char reg;
222 reg = s3fb_ddc_read(par) | DDC_DRIVE_EN;
223 if (val)
224 reg |= DDC_SCL_OUT;
225 else
226 reg &= ~DDC_SCL_OUT;
227 s3fb_ddc_write(par, reg);
230 static void s3fb_ddc_setsda(void *data, int val)
232 struct s3fb_info *par = data;
233 unsigned char reg;
235 reg = s3fb_ddc_read(par) | DDC_DRIVE_EN;
236 if (val)
237 reg |= DDC_SDA_OUT;
238 else
239 reg &= ~DDC_SDA_OUT;
240 s3fb_ddc_write(par, reg);
243 static int s3fb_ddc_getscl(void *data)
245 struct s3fb_info *par = data;
247 return !!(s3fb_ddc_read(par) & DDC_SCL_IN);
250 static int s3fb_ddc_getsda(void *data)
252 struct s3fb_info *par = data;
254 return !!(s3fb_ddc_read(par) & DDC_SDA_IN);
257 static int __devinit s3fb_setup_ddc_bus(struct fb_info *info)
259 struct s3fb_info *par = info->par;
261 strlcpy(par->ddc_adapter.name, info->fix.id,
262 sizeof(par->ddc_adapter.name));
263 par->ddc_adapter.owner = THIS_MODULE;
264 par->ddc_adapter.class = I2C_CLASS_DDC;
265 par->ddc_adapter.algo_data = &par->ddc_algo;
266 par->ddc_adapter.dev.parent = info->device;
267 par->ddc_algo.setsda = s3fb_ddc_setsda;
268 par->ddc_algo.setscl = s3fb_ddc_setscl;
269 par->ddc_algo.getsda = s3fb_ddc_getsda;
270 par->ddc_algo.getscl = s3fb_ddc_getscl;
271 par->ddc_algo.udelay = 10;
272 par->ddc_algo.timeout = 20;
273 par->ddc_algo.data = par;
275 i2c_set_adapdata(&par->ddc_adapter, par);
278 * some Virge cards have external MUX to switch chip I2C bus between
279 * DDC and extension pins - switch it do DDC
281 /* vga_wseq(par->state.vgabase, 0x08, 0x06); - not needed, already unlocked */
282 if (par->chip == CHIP_357_VIRGE_GX2 ||
283 par->chip == CHIP_359_VIRGE_GX2P)
284 svga_wseq_mask(par->state.vgabase, 0x0d, 0x01, 0x03);
285 else
286 svga_wseq_mask(par->state.vgabase, 0x0d, 0x00, 0x03);
287 /* some Virge need this or the DDC is ignored */
288 svga_wcrt_mask(par->state.vgabase, 0x5c, 0x03, 0x03);
290 return i2c_bit_add_bus(&par->ddc_adapter);
292 #endif /* CONFIG_FB_S3_DDC */
295 /* ------------------------------------------------------------------------- */
297 /* Set font in S3 fast text mode */
299 static void s3fb_settile_fast(struct fb_info *info, struct fb_tilemap *map)
301 const u8 *font = map->data;
302 u8 __iomem *fb = (u8 __iomem *) info->screen_base;
303 int i, c;
305 if ((map->width != 8) || (map->height != 16) ||
306 (map->depth != 1) || (map->length != 256)) {
307 printk(KERN_ERR "fb%d: unsupported font parameters: width %d, height %d, depth %d, length %d\n",
308 info->node, map->width, map->height, map->depth, map->length);
309 return;
312 fb += 2;
313 for (i = 0; i < map->height; i++) {
314 for (c = 0; c < map->length; c++) {
315 fb_writeb(font[c * map->height + i], fb + c * 4);
317 fb += 1024;
321 static void s3fb_tilecursor(struct fb_info *info, struct fb_tilecursor *cursor)
323 struct s3fb_info *par = info->par;
325 svga_tilecursor(par->state.vgabase, info, cursor);
328 static struct fb_tile_ops s3fb_tile_ops = {
329 .fb_settile = svga_settile,
330 .fb_tilecopy = svga_tilecopy,
331 .fb_tilefill = svga_tilefill,
332 .fb_tileblit = svga_tileblit,
333 .fb_tilecursor = s3fb_tilecursor,
334 .fb_get_tilemax = svga_get_tilemax,
337 static struct fb_tile_ops s3fb_fast_tile_ops = {
338 .fb_settile = s3fb_settile_fast,
339 .fb_tilecopy = svga_tilecopy,
340 .fb_tilefill = svga_tilefill,
341 .fb_tileblit = svga_tileblit,
342 .fb_tilecursor = s3fb_tilecursor,
343 .fb_get_tilemax = svga_get_tilemax,
347 /* ------------------------------------------------------------------------- */
349 /* image data is MSB-first, fb structure is MSB-first too */
350 static inline u32 expand_color(u32 c)
352 return ((c & 1) | ((c & 2) << 7) | ((c & 4) << 14) | ((c & 8) << 21)) * 0xFF;
355 /* s3fb_iplan_imageblit silently assumes that almost everything is 8-pixel aligned */
356 static void s3fb_iplan_imageblit(struct fb_info *info, const struct fb_image *image)
358 u32 fg = expand_color(image->fg_color);
359 u32 bg = expand_color(image->bg_color);
360 const u8 *src1, *src;
361 u8 __iomem *dst1;
362 u32 __iomem *dst;
363 u32 val;
364 int x, y;
366 src1 = image->data;
367 dst1 = info->screen_base + (image->dy * info->fix.line_length)
368 + ((image->dx / 8) * 4);
370 for (y = 0; y < image->height; y++) {
371 src = src1;
372 dst = (u32 __iomem *) dst1;
373 for (x = 0; x < image->width; x += 8) {
374 val = *(src++) * 0x01010101;
375 val = (val & fg) | (~val & bg);
376 fb_writel(val, dst++);
378 src1 += image->width / 8;
379 dst1 += info->fix.line_length;
384 /* s3fb_iplan_fillrect silently assumes that almost everything is 8-pixel aligned */
385 static void s3fb_iplan_fillrect(struct fb_info *info, const struct fb_fillrect *rect)
387 u32 fg = expand_color(rect->color);
388 u8 __iomem *dst1;
389 u32 __iomem *dst;
390 int x, y;
392 dst1 = info->screen_base + (rect->dy * info->fix.line_length)
393 + ((rect->dx / 8) * 4);
395 for (y = 0; y < rect->height; y++) {
396 dst = (u32 __iomem *) dst1;
397 for (x = 0; x < rect->width; x += 8) {
398 fb_writel(fg, dst++);
400 dst1 += info->fix.line_length;
405 /* image data is MSB-first, fb structure is high-nibble-in-low-byte-first */
406 static inline u32 expand_pixel(u32 c)
408 return (((c & 1) << 24) | ((c & 2) << 27) | ((c & 4) << 14) | ((c & 8) << 17) |
409 ((c & 16) << 4) | ((c & 32) << 7) | ((c & 64) >> 6) | ((c & 128) >> 3)) * 0xF;
412 /* s3fb_cfb4_imageblit silently assumes that almost everything is 8-pixel aligned */
413 static void s3fb_cfb4_imageblit(struct fb_info *info, const struct fb_image *image)
415 u32 fg = image->fg_color * 0x11111111;
416 u32 bg = image->bg_color * 0x11111111;
417 const u8 *src1, *src;
418 u8 __iomem *dst1;
419 u32 __iomem *dst;
420 u32 val;
421 int x, y;
423 src1 = image->data;
424 dst1 = info->screen_base + (image->dy * info->fix.line_length)
425 + ((image->dx / 8) * 4);
427 for (y = 0; y < image->height; y++) {
428 src = src1;
429 dst = (u32 __iomem *) dst1;
430 for (x = 0; x < image->width; x += 8) {
431 val = expand_pixel(*(src++));
432 val = (val & fg) | (~val & bg);
433 fb_writel(val, dst++);
435 src1 += image->width / 8;
436 dst1 += info->fix.line_length;
440 static void s3fb_imageblit(struct fb_info *info, const struct fb_image *image)
442 if ((info->var.bits_per_pixel == 4) && (image->depth == 1)
443 && ((image->width % 8) == 0) && ((image->dx % 8) == 0)) {
444 if (info->fix.type == FB_TYPE_INTERLEAVED_PLANES)
445 s3fb_iplan_imageblit(info, image);
446 else
447 s3fb_cfb4_imageblit(info, image);
448 } else
449 cfb_imageblit(info, image);
452 static void s3fb_fillrect(struct fb_info *info, const struct fb_fillrect *rect)
454 if ((info->var.bits_per_pixel == 4)
455 && ((rect->width % 8) == 0) && ((rect->dx % 8) == 0)
456 && (info->fix.type == FB_TYPE_INTERLEAVED_PLANES))
457 s3fb_iplan_fillrect(info, rect);
458 else
459 cfb_fillrect(info, rect);
464 /* ------------------------------------------------------------------------- */
467 static void s3_set_pixclock(struct fb_info *info, u32 pixclock)
469 struct s3fb_info *par = info->par;
470 u16 m, n, r;
471 u8 regval;
472 int rv;
474 rv = svga_compute_pll((par->chip == CHIP_365_TRIO3D) ? &s3_trio3d_pll : &s3_pll,
475 1000000000 / pixclock, &m, &n, &r, info->node);
476 if (rv < 0) {
477 printk(KERN_ERR "fb%d: cannot set requested pixclock, keeping old value\n", info->node);
478 return;
481 /* Set VGA misc register */
482 regval = vga_r(par->state.vgabase, VGA_MIS_R);
483 vga_w(par->state.vgabase, VGA_MIS_W, regval | VGA_MIS_ENB_PLL_LOAD);
485 /* Set S3 clock registers */
486 if (par->chip == CHIP_357_VIRGE_GX2 ||
487 par->chip == CHIP_359_VIRGE_GX2P ||
488 par->chip == CHIP_360_TRIO3D_1X ||
489 par->chip == CHIP_362_TRIO3D_2X ||
490 par->chip == CHIP_368_TRIO3D_2X) {
491 vga_wseq(par->state.vgabase, 0x12, (n - 2) | ((r & 3) << 6)); /* n and two bits of r */
492 vga_wseq(par->state.vgabase, 0x29, r >> 2); /* remaining highest bit of r */
493 } else
494 vga_wseq(par->state.vgabase, 0x12, (n - 2) | (r << 5));
495 vga_wseq(par->state.vgabase, 0x13, m - 2);
497 udelay(1000);
499 /* Activate clock - write 0, 1, 0 to seq/15 bit 5 */
500 regval = vga_rseq (par->state.vgabase, 0x15); /* | 0x80; */
501 vga_wseq(par->state.vgabase, 0x15, regval & ~(1<<5));
502 vga_wseq(par->state.vgabase, 0x15, regval | (1<<5));
503 vga_wseq(par->state.vgabase, 0x15, regval & ~(1<<5));
507 /* Open framebuffer */
509 static int s3fb_open(struct fb_info *info, int user)
511 struct s3fb_info *par = info->par;
513 mutex_lock(&(par->open_lock));
514 if (par->ref_count == 0) {
515 void __iomem *vgabase = par->state.vgabase;
517 memset(&(par->state), 0, sizeof(struct vgastate));
518 par->state.vgabase = vgabase;
519 par->state.flags = VGA_SAVE_MODE | VGA_SAVE_FONTS | VGA_SAVE_CMAP;
520 par->state.num_crtc = 0x70;
521 par->state.num_seq = 0x20;
522 save_vga(&(par->state));
525 par->ref_count++;
526 mutex_unlock(&(par->open_lock));
528 return 0;
531 /* Close framebuffer */
533 static int s3fb_release(struct fb_info *info, int user)
535 struct s3fb_info *par = info->par;
537 mutex_lock(&(par->open_lock));
538 if (par->ref_count == 0) {
539 mutex_unlock(&(par->open_lock));
540 return -EINVAL;
543 if (par->ref_count == 1)
544 restore_vga(&(par->state));
546 par->ref_count--;
547 mutex_unlock(&(par->open_lock));
549 return 0;
552 /* Validate passed in var */
554 static int s3fb_check_var(struct fb_var_screeninfo *var, struct fb_info *info)
556 struct s3fb_info *par = info->par;
557 int rv, mem, step;
558 u16 m, n, r;
560 /* Find appropriate format */
561 rv = svga_match_format (s3fb_formats, var, NULL);
563 /* 32bpp mode is not supported on VIRGE VX,
564 24bpp is not supported on others */
565 if ((par->chip == CHIP_988_VIRGE_VX) ? (rv == 7) : (rv == 6))
566 rv = -EINVAL;
568 if (rv < 0) {
569 printk(KERN_ERR "fb%d: unsupported mode requested\n", info->node);
570 return rv;
573 /* Do not allow to have real resoulution larger than virtual */
574 if (var->xres > var->xres_virtual)
575 var->xres_virtual = var->xres;
577 if (var->yres > var->yres_virtual)
578 var->yres_virtual = var->yres;
580 /* Round up xres_virtual to have proper alignment of lines */
581 step = s3fb_formats[rv].xresstep - 1;
582 var->xres_virtual = (var->xres_virtual+step) & ~step;
584 /* Check whether have enough memory */
585 mem = ((var->bits_per_pixel * var->xres_virtual) >> 3) * var->yres_virtual;
586 if (mem > info->screen_size) {
587 printk(KERN_ERR "fb%d: not enough framebuffer memory (%d kB requested , %d kB available)\n",
588 info->node, mem >> 10, (unsigned int) (info->screen_size >> 10));
589 return -EINVAL;
592 rv = svga_check_timings (&s3_timing_regs, var, info->node);
593 if (rv < 0) {
594 printk(KERN_ERR "fb%d: invalid timings requested\n", info->node);
595 return rv;
598 rv = svga_compute_pll(&s3_pll, PICOS2KHZ(var->pixclock), &m, &n, &r,
599 info->node);
600 if (rv < 0) {
601 printk(KERN_ERR "fb%d: invalid pixclock value requested\n",
602 info->node);
603 return rv;
606 return 0;
609 /* Set video mode from par */
611 static int s3fb_set_par(struct fb_info *info)
613 struct s3fb_info *par = info->par;
614 u32 value, mode, hmul, offset_value, screen_size, multiplex, dbytes;
615 u32 bpp = info->var.bits_per_pixel;
616 u32 htotal, hsstart;
618 if (bpp != 0) {
619 info->fix.ypanstep = 1;
620 info->fix.line_length = (info->var.xres_virtual * bpp) / 8;
622 info->flags &= ~FBINFO_MISC_TILEBLITTING;
623 info->tileops = NULL;
625 /* in 4bpp supports 8p wide tiles only, any tiles otherwise */
626 info->pixmap.blit_x = (bpp == 4) ? (1 << (8 - 1)) : (~(u32)0);
627 info->pixmap.blit_y = ~(u32)0;
629 offset_value = (info->var.xres_virtual * bpp) / 64;
630 screen_size = info->var.yres_virtual * info->fix.line_length;
631 } else {
632 info->fix.ypanstep = 16;
633 info->fix.line_length = 0;
635 info->flags |= FBINFO_MISC_TILEBLITTING;
636 info->tileops = fasttext ? &s3fb_fast_tile_ops : &s3fb_tile_ops;
638 /* supports 8x16 tiles only */
639 info->pixmap.blit_x = 1 << (8 - 1);
640 info->pixmap.blit_y = 1 << (16 - 1);
642 offset_value = info->var.xres_virtual / 16;
643 screen_size = (info->var.xres_virtual * info->var.yres_virtual) / 64;
646 info->var.xoffset = 0;
647 info->var.yoffset = 0;
648 info->var.activate = FB_ACTIVATE_NOW;
650 /* Unlock registers */
651 vga_wcrt(par->state.vgabase, 0x38, 0x48);
652 vga_wcrt(par->state.vgabase, 0x39, 0xA5);
653 vga_wseq(par->state.vgabase, 0x08, 0x06);
654 svga_wcrt_mask(par->state.vgabase, 0x11, 0x00, 0x80);
656 /* Blank screen and turn off sync */
657 svga_wseq_mask(par->state.vgabase, 0x01, 0x20, 0x20);
658 svga_wcrt_mask(par->state.vgabase, 0x17, 0x00, 0x80);
660 /* Set default values */
661 svga_set_default_gfx_regs(par->state.vgabase);
662 svga_set_default_atc_regs(par->state.vgabase);
663 svga_set_default_seq_regs(par->state.vgabase);
664 svga_set_default_crt_regs(par->state.vgabase);
665 svga_wcrt_multi(par->state.vgabase, s3_line_compare_regs, 0xFFFFFFFF);
666 svga_wcrt_multi(par->state.vgabase, s3_start_address_regs, 0);
668 /* S3 specific initialization */
669 svga_wcrt_mask(par->state.vgabase, 0x58, 0x10, 0x10); /* enable linear framebuffer */
670 svga_wcrt_mask(par->state.vgabase, 0x31, 0x08, 0x08); /* enable sequencer access to framebuffer above 256 kB */
672 /* svga_wcrt_mask(par->state.vgabase, 0x33, 0x08, 0x08); */ /* DDR ? */
673 /* svga_wcrt_mask(par->state.vgabase, 0x43, 0x01, 0x01); */ /* DDR ? */
674 svga_wcrt_mask(par->state.vgabase, 0x33, 0x00, 0x08); /* no DDR ? */
675 svga_wcrt_mask(par->state.vgabase, 0x43, 0x00, 0x01); /* no DDR ? */
677 svga_wcrt_mask(par->state.vgabase, 0x5D, 0x00, 0x28); /* Clear strange HSlen bits */
679 /* svga_wcrt_mask(par->state.vgabase, 0x58, 0x03, 0x03); */
681 /* svga_wcrt_mask(par->state.vgabase, 0x53, 0x12, 0x13); */ /* enable MMIO */
682 /* svga_wcrt_mask(par->state.vgabase, 0x40, 0x08, 0x08); */ /* enable write buffer */
685 /* Set the offset register */
686 pr_debug("fb%d: offset register : %d\n", info->node, offset_value);
687 svga_wcrt_multi(par->state.vgabase, s3_offset_regs, offset_value);
689 if (par->chip != CHIP_357_VIRGE_GX2 &&
690 par->chip != CHIP_359_VIRGE_GX2P &&
691 par->chip != CHIP_360_TRIO3D_1X &&
692 par->chip != CHIP_362_TRIO3D_2X &&
693 par->chip != CHIP_368_TRIO3D_2X) {
694 vga_wcrt(par->state.vgabase, 0x54, 0x18); /* M parameter */
695 vga_wcrt(par->state.vgabase, 0x60, 0xff); /* N parameter */
696 vga_wcrt(par->state.vgabase, 0x61, 0xff); /* L parameter */
697 vga_wcrt(par->state.vgabase, 0x62, 0xff); /* L parameter */
700 vga_wcrt(par->state.vgabase, 0x3A, 0x35);
701 svga_wattr(par->state.vgabase, 0x33, 0x00);
703 if (info->var.vmode & FB_VMODE_DOUBLE)
704 svga_wcrt_mask(par->state.vgabase, 0x09, 0x80, 0x80);
705 else
706 svga_wcrt_mask(par->state.vgabase, 0x09, 0x00, 0x80);
708 if (info->var.vmode & FB_VMODE_INTERLACED)
709 svga_wcrt_mask(par->state.vgabase, 0x42, 0x20, 0x20);
710 else
711 svga_wcrt_mask(par->state.vgabase, 0x42, 0x00, 0x20);
713 /* Disable hardware graphics cursor */
714 svga_wcrt_mask(par->state.vgabase, 0x45, 0x00, 0x01);
715 /* Disable Streams engine */
716 svga_wcrt_mask(par->state.vgabase, 0x67, 0x00, 0x0C);
718 mode = svga_match_format(s3fb_formats, &(info->var), &(info->fix));
720 /* S3 virge DX hack */
721 if (par->chip == CHIP_375_VIRGE_DX) {
722 vga_wcrt(par->state.vgabase, 0x86, 0x80);
723 vga_wcrt(par->state.vgabase, 0x90, 0x00);
726 /* S3 virge VX hack */
727 if (par->chip == CHIP_988_VIRGE_VX) {
728 vga_wcrt(par->state.vgabase, 0x50, 0x00);
729 vga_wcrt(par->state.vgabase, 0x67, 0x50);
731 vga_wcrt(par->state.vgabase, 0x63, (mode <= 2) ? 0x90 : 0x09);
732 vga_wcrt(par->state.vgabase, 0x66, 0x90);
735 if (par->chip == CHIP_357_VIRGE_GX2 ||
736 par->chip == CHIP_359_VIRGE_GX2P ||
737 par->chip == CHIP_360_TRIO3D_1X ||
738 par->chip == CHIP_362_TRIO3D_2X ||
739 par->chip == CHIP_368_TRIO3D_2X ||
740 par->chip == CHIP_365_TRIO3D ||
741 par->chip == CHIP_375_VIRGE_DX ||
742 par->chip == CHIP_385_VIRGE_GX) {
743 dbytes = info->var.xres * ((bpp+7)/8);
744 vga_wcrt(par->state.vgabase, 0x91, (dbytes + 7) / 8);
745 vga_wcrt(par->state.vgabase, 0x90, (((dbytes + 7) / 8) >> 8) | 0x80);
747 vga_wcrt(par->state.vgabase, 0x66, 0x81);
750 if (par->chip == CHIP_357_VIRGE_GX2 ||
751 par->chip == CHIP_359_VIRGE_GX2P ||
752 par->chip == CHIP_360_TRIO3D_1X ||
753 par->chip == CHIP_362_TRIO3D_2X ||
754 par->chip == CHIP_368_TRIO3D_2X)
755 vga_wcrt(par->state.vgabase, 0x34, 0x00);
756 else /* enable Data Transfer Position Control (DTPC) */
757 vga_wcrt(par->state.vgabase, 0x34, 0x10);
759 svga_wcrt_mask(par->state.vgabase, 0x31, 0x00, 0x40);
760 multiplex = 0;
761 hmul = 1;
763 /* Set mode-specific register values */
764 switch (mode) {
765 case 0:
766 pr_debug("fb%d: text mode\n", info->node);
767 svga_set_textmode_vga_regs(par->state.vgabase);
769 /* Set additional registers like in 8-bit mode */
770 svga_wcrt_mask(par->state.vgabase, 0x50, 0x00, 0x30);
771 svga_wcrt_mask(par->state.vgabase, 0x67, 0x00, 0xF0);
773 /* Disable enhanced mode */
774 svga_wcrt_mask(par->state.vgabase, 0x3A, 0x00, 0x30);
776 if (fasttext) {
777 pr_debug("fb%d: high speed text mode set\n", info->node);
778 svga_wcrt_mask(par->state.vgabase, 0x31, 0x40, 0x40);
780 break;
781 case 1:
782 pr_debug("fb%d: 4 bit pseudocolor\n", info->node);
783 vga_wgfx(par->state.vgabase, VGA_GFX_MODE, 0x40);
785 /* Set additional registers like in 8-bit mode */
786 svga_wcrt_mask(par->state.vgabase, 0x50, 0x00, 0x30);
787 svga_wcrt_mask(par->state.vgabase, 0x67, 0x00, 0xF0);
789 /* disable enhanced mode */
790 svga_wcrt_mask(par->state.vgabase, 0x3A, 0x00, 0x30);
791 break;
792 case 2:
793 pr_debug("fb%d: 4 bit pseudocolor, planar\n", info->node);
795 /* Set additional registers like in 8-bit mode */
796 svga_wcrt_mask(par->state.vgabase, 0x50, 0x00, 0x30);
797 svga_wcrt_mask(par->state.vgabase, 0x67, 0x00, 0xF0);
799 /* disable enhanced mode */
800 svga_wcrt_mask(par->state.vgabase, 0x3A, 0x00, 0x30);
801 break;
802 case 3:
803 pr_debug("fb%d: 8 bit pseudocolor\n", info->node);
804 svga_wcrt_mask(par->state.vgabase, 0x50, 0x00, 0x30);
805 if (info->var.pixclock > 20000 ||
806 par->chip == CHIP_357_VIRGE_GX2 ||
807 par->chip == CHIP_359_VIRGE_GX2P ||
808 par->chip == CHIP_360_TRIO3D_1X ||
809 par->chip == CHIP_362_TRIO3D_2X ||
810 par->chip == CHIP_368_TRIO3D_2X)
811 svga_wcrt_mask(par->state.vgabase, 0x67, 0x00, 0xF0);
812 else {
813 svga_wcrt_mask(par->state.vgabase, 0x67, 0x10, 0xF0);
814 multiplex = 1;
816 break;
817 case 4:
818 pr_debug("fb%d: 5/5/5 truecolor\n", info->node);
819 if (par->chip == CHIP_988_VIRGE_VX) {
820 if (info->var.pixclock > 20000)
821 svga_wcrt_mask(par->state.vgabase, 0x67, 0x20, 0xF0);
822 else
823 svga_wcrt_mask(par->state.vgabase, 0x67, 0x30, 0xF0);
824 } else if (par->chip == CHIP_365_TRIO3D) {
825 svga_wcrt_mask(par->state.vgabase, 0x50, 0x10, 0x30);
826 if (info->var.pixclock > 8695) {
827 svga_wcrt_mask(par->state.vgabase, 0x67, 0x30, 0xF0);
828 hmul = 2;
829 } else {
830 svga_wcrt_mask(par->state.vgabase, 0x67, 0x20, 0xF0);
831 multiplex = 1;
833 } else {
834 svga_wcrt_mask(par->state.vgabase, 0x50, 0x10, 0x30);
835 svga_wcrt_mask(par->state.vgabase, 0x67, 0x30, 0xF0);
836 if (par->chip != CHIP_357_VIRGE_GX2 &&
837 par->chip != CHIP_359_VIRGE_GX2P &&
838 par->chip != CHIP_360_TRIO3D_1X &&
839 par->chip != CHIP_362_TRIO3D_2X &&
840 par->chip != CHIP_368_TRIO3D_2X)
841 hmul = 2;
843 break;
844 case 5:
845 pr_debug("fb%d: 5/6/5 truecolor\n", info->node);
846 if (par->chip == CHIP_988_VIRGE_VX) {
847 if (info->var.pixclock > 20000)
848 svga_wcrt_mask(par->state.vgabase, 0x67, 0x40, 0xF0);
849 else
850 svga_wcrt_mask(par->state.vgabase, 0x67, 0x50, 0xF0);
851 } else if (par->chip == CHIP_365_TRIO3D) {
852 svga_wcrt_mask(par->state.vgabase, 0x50, 0x10, 0x30);
853 if (info->var.pixclock > 8695) {
854 svga_wcrt_mask(par->state.vgabase, 0x67, 0x50, 0xF0);
855 hmul = 2;
856 } else {
857 svga_wcrt_mask(par->state.vgabase, 0x67, 0x40, 0xF0);
858 multiplex = 1;
860 } else {
861 svga_wcrt_mask(par->state.vgabase, 0x50, 0x10, 0x30);
862 svga_wcrt_mask(par->state.vgabase, 0x67, 0x50, 0xF0);
863 if (par->chip != CHIP_357_VIRGE_GX2 &&
864 par->chip != CHIP_359_VIRGE_GX2P &&
865 par->chip != CHIP_360_TRIO3D_1X &&
866 par->chip != CHIP_362_TRIO3D_2X &&
867 par->chip != CHIP_368_TRIO3D_2X)
868 hmul = 2;
870 break;
871 case 6:
872 /* VIRGE VX case */
873 pr_debug("fb%d: 8/8/8 truecolor\n", info->node);
874 svga_wcrt_mask(par->state.vgabase, 0x67, 0xD0, 0xF0);
875 break;
876 case 7:
877 pr_debug("fb%d: 8/8/8/8 truecolor\n", info->node);
878 svga_wcrt_mask(par->state.vgabase, 0x50, 0x30, 0x30);
879 svga_wcrt_mask(par->state.vgabase, 0x67, 0xD0, 0xF0);
880 break;
881 default:
882 printk(KERN_ERR "fb%d: unsupported mode - bug\n", info->node);
883 return -EINVAL;
886 if (par->chip != CHIP_988_VIRGE_VX) {
887 svga_wseq_mask(par->state.vgabase, 0x15, multiplex ? 0x10 : 0x00, 0x10);
888 svga_wseq_mask(par->state.vgabase, 0x18, multiplex ? 0x80 : 0x00, 0x80);
891 s3_set_pixclock(info, info->var.pixclock);
892 svga_set_timings(par->state.vgabase, &s3_timing_regs, &(info->var), hmul, 1,
893 (info->var.vmode & FB_VMODE_DOUBLE) ? 2 : 1,
894 (info->var.vmode & FB_VMODE_INTERLACED) ? 2 : 1,
895 hmul, info->node);
897 /* Set interlaced mode start/end register */
898 htotal = info->var.xres + info->var.left_margin + info->var.right_margin + info->var.hsync_len;
899 htotal = ((htotal * hmul) / 8) - 5;
900 vga_wcrt(par->state.vgabase, 0x3C, (htotal + 1) / 2);
902 /* Set Data Transfer Position */
903 hsstart = ((info->var.xres + info->var.right_margin) * hmul) / 8;
904 value = clamp((htotal + hsstart + 1) / 2, hsstart + 4, htotal + 1);
905 svga_wcrt_multi(par->state.vgabase, s3_dtpc_regs, value);
907 memset_io(info->screen_base, 0x00, screen_size);
908 /* Device and screen back on */
909 svga_wcrt_mask(par->state.vgabase, 0x17, 0x80, 0x80);
910 svga_wseq_mask(par->state.vgabase, 0x01, 0x00, 0x20);
912 return 0;
915 /* Set a colour register */
917 static int s3fb_setcolreg(u_int regno, u_int red, u_int green, u_int blue,
918 u_int transp, struct fb_info *fb)
920 switch (fb->var.bits_per_pixel) {
921 case 0:
922 case 4:
923 if (regno >= 16)
924 return -EINVAL;
926 if ((fb->var.bits_per_pixel == 4) &&
927 (fb->var.nonstd == 0)) {
928 outb(0xF0, VGA_PEL_MSK);
929 outb(regno*16, VGA_PEL_IW);
930 } else {
931 outb(0x0F, VGA_PEL_MSK);
932 outb(regno, VGA_PEL_IW);
934 outb(red >> 10, VGA_PEL_D);
935 outb(green >> 10, VGA_PEL_D);
936 outb(blue >> 10, VGA_PEL_D);
937 break;
938 case 8:
939 if (regno >= 256)
940 return -EINVAL;
942 outb(0xFF, VGA_PEL_MSK);
943 outb(regno, VGA_PEL_IW);
944 outb(red >> 10, VGA_PEL_D);
945 outb(green >> 10, VGA_PEL_D);
946 outb(blue >> 10, VGA_PEL_D);
947 break;
948 case 16:
949 if (regno >= 16)
950 return 0;
952 if (fb->var.green.length == 5)
953 ((u32*)fb->pseudo_palette)[regno] = ((red & 0xF800) >> 1) |
954 ((green & 0xF800) >> 6) | ((blue & 0xF800) >> 11);
955 else if (fb->var.green.length == 6)
956 ((u32*)fb->pseudo_palette)[regno] = (red & 0xF800) |
957 ((green & 0xFC00) >> 5) | ((blue & 0xF800) >> 11);
958 else return -EINVAL;
959 break;
960 case 24:
961 case 32:
962 if (regno >= 16)
963 return 0;
965 ((u32*)fb->pseudo_palette)[regno] = ((red & 0xFF00) << 8) |
966 (green & 0xFF00) | ((blue & 0xFF00) >> 8);
967 break;
968 default:
969 return -EINVAL;
972 return 0;
976 /* Set the display blanking state */
978 static int s3fb_blank(int blank_mode, struct fb_info *info)
980 struct s3fb_info *par = info->par;
982 switch (blank_mode) {
983 case FB_BLANK_UNBLANK:
984 pr_debug("fb%d: unblank\n", info->node);
985 svga_wcrt_mask(par->state.vgabase, 0x56, 0x00, 0x06);
986 svga_wseq_mask(par->state.vgabase, 0x01, 0x00, 0x20);
987 break;
988 case FB_BLANK_NORMAL:
989 pr_debug("fb%d: blank\n", info->node);
990 svga_wcrt_mask(par->state.vgabase, 0x56, 0x00, 0x06);
991 svga_wseq_mask(par->state.vgabase, 0x01, 0x20, 0x20);
992 break;
993 case FB_BLANK_HSYNC_SUSPEND:
994 pr_debug("fb%d: hsync\n", info->node);
995 svga_wcrt_mask(par->state.vgabase, 0x56, 0x02, 0x06);
996 svga_wseq_mask(par->state.vgabase, 0x01, 0x20, 0x20);
997 break;
998 case FB_BLANK_VSYNC_SUSPEND:
999 pr_debug("fb%d: vsync\n", info->node);
1000 svga_wcrt_mask(par->state.vgabase, 0x56, 0x04, 0x06);
1001 svga_wseq_mask(par->state.vgabase, 0x01, 0x20, 0x20);
1002 break;
1003 case FB_BLANK_POWERDOWN:
1004 pr_debug("fb%d: sync down\n", info->node);
1005 svga_wcrt_mask(par->state.vgabase, 0x56, 0x06, 0x06);
1006 svga_wseq_mask(par->state.vgabase, 0x01, 0x20, 0x20);
1007 break;
1010 return 0;
1014 /* Pan the display */
1016 static int s3fb_pan_display(struct fb_var_screeninfo *var, struct fb_info *info)
1018 struct s3fb_info *par = info->par;
1019 unsigned int offset;
1021 /* Calculate the offset */
1022 if (var->bits_per_pixel == 0) {
1023 offset = (var->yoffset / 16) * (var->xres_virtual / 2) + (var->xoffset / 2);
1024 offset = offset >> 2;
1025 } else {
1026 offset = (var->yoffset * info->fix.line_length) +
1027 (var->xoffset * var->bits_per_pixel / 8);
1028 offset = offset >> 2;
1031 /* Set the offset */
1032 svga_wcrt_multi(par->state.vgabase, s3_start_address_regs, offset);
1034 return 0;
1037 /* ------------------------------------------------------------------------- */
1039 /* Frame buffer operations */
1041 static struct fb_ops s3fb_ops = {
1042 .owner = THIS_MODULE,
1043 .fb_open = s3fb_open,
1044 .fb_release = s3fb_release,
1045 .fb_check_var = s3fb_check_var,
1046 .fb_set_par = s3fb_set_par,
1047 .fb_setcolreg = s3fb_setcolreg,
1048 .fb_blank = s3fb_blank,
1049 .fb_pan_display = s3fb_pan_display,
1050 .fb_fillrect = s3fb_fillrect,
1051 .fb_copyarea = cfb_copyarea,
1052 .fb_imageblit = s3fb_imageblit,
1053 .fb_get_caps = svga_get_caps,
1056 /* ------------------------------------------------------------------------- */
1058 static int __devinit s3_identification(struct s3fb_info *par)
1060 int chip = par->chip;
1062 if (chip == CHIP_XXX_TRIO) {
1063 u8 cr30 = vga_rcrt(par->state.vgabase, 0x30);
1064 u8 cr2e = vga_rcrt(par->state.vgabase, 0x2e);
1065 u8 cr2f = vga_rcrt(par->state.vgabase, 0x2f);
1067 if ((cr30 == 0xE0) || (cr30 == 0xE1)) {
1068 if (cr2e == 0x10)
1069 return CHIP_732_TRIO32;
1070 if (cr2e == 0x11) {
1071 if (! (cr2f & 0x40))
1072 return CHIP_764_TRIO64;
1073 else
1074 return CHIP_765_TRIO64VP;
1079 if (chip == CHIP_XXX_TRIO64V2_DXGX) {
1080 u8 cr6f = vga_rcrt(par->state.vgabase, 0x6f);
1082 if (! (cr6f & 0x01))
1083 return CHIP_775_TRIO64V2_DX;
1084 else
1085 return CHIP_785_TRIO64V2_GX;
1088 if (chip == CHIP_XXX_VIRGE_DXGX) {
1089 u8 cr6f = vga_rcrt(par->state.vgabase, 0x6f);
1091 if (! (cr6f & 0x01))
1092 return CHIP_375_VIRGE_DX;
1093 else
1094 return CHIP_385_VIRGE_GX;
1097 if (chip == CHIP_36X_TRIO3D_1X_2X) {
1098 switch (vga_rcrt(par->state.vgabase, 0x2f)) {
1099 case 0x00:
1100 return CHIP_360_TRIO3D_1X;
1101 case 0x01:
1102 return CHIP_362_TRIO3D_2X;
1103 case 0x02:
1104 return CHIP_368_TRIO3D_2X;
1108 return CHIP_UNKNOWN;
1112 /* PCI probe */
1114 static int __devinit s3_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
1116 struct pci_bus_region bus_reg;
1117 struct resource vga_res;
1118 struct fb_info *info;
1119 struct s3fb_info *par;
1120 int rc;
1121 u8 regval, cr38, cr39;
1122 bool found = false;
1124 /* Ignore secondary VGA device because there is no VGA arbitration */
1125 if (! svga_primary_device(dev)) {
1126 dev_info(&(dev->dev), "ignoring secondary device\n");
1127 return -ENODEV;
1130 /* Allocate and fill driver data structure */
1131 info = framebuffer_alloc(sizeof(struct s3fb_info), &(dev->dev));
1132 if (!info) {
1133 dev_err(&(dev->dev), "cannot allocate memory\n");
1134 return -ENOMEM;
1137 par = info->par;
1138 mutex_init(&par->open_lock);
1140 info->flags = FBINFO_PARTIAL_PAN_OK | FBINFO_HWACCEL_YPAN;
1141 info->fbops = &s3fb_ops;
1143 /* Prepare PCI device */
1144 rc = pci_enable_device(dev);
1145 if (rc < 0) {
1146 dev_err(info->device, "cannot enable PCI device\n");
1147 goto err_enable_device;
1150 rc = pci_request_regions(dev, "s3fb");
1151 if (rc < 0) {
1152 dev_err(info->device, "cannot reserve framebuffer region\n");
1153 goto err_request_regions;
1157 info->fix.smem_start = pci_resource_start(dev, 0);
1158 info->fix.smem_len = pci_resource_len(dev, 0);
1160 /* Map physical IO memory address into kernel space */
1161 info->screen_base = pci_iomap(dev, 0, 0);
1162 if (! info->screen_base) {
1163 rc = -ENOMEM;
1164 dev_err(info->device, "iomap for framebuffer failed\n");
1165 goto err_iomap;
1168 bus_reg.start = 0;
1169 bus_reg.end = 64 * 1024;
1171 vga_res.flags = IORESOURCE_IO;
1173 pcibios_bus_to_resource(dev, &vga_res, &bus_reg);
1175 par->state.vgabase = (void __iomem *) vga_res.start;
1177 /* Unlock regs */
1178 cr38 = vga_rcrt(par->state.vgabase, 0x38);
1179 cr39 = vga_rcrt(par->state.vgabase, 0x39);
1180 vga_wseq(par->state.vgabase, 0x08, 0x06);
1181 vga_wcrt(par->state.vgabase, 0x38, 0x48);
1182 vga_wcrt(par->state.vgabase, 0x39, 0xA5);
1184 /* Identify chip type */
1185 par->chip = id->driver_data & CHIP_MASK;
1186 par->rev = vga_rcrt(par->state.vgabase, 0x2f);
1187 if (par->chip & CHIP_UNDECIDED_FLAG)
1188 par->chip = s3_identification(par);
1190 /* Find how many physical memory there is on card */
1191 /* 0x36 register is accessible even if other registers are locked */
1192 regval = vga_rcrt(par->state.vgabase, 0x36);
1193 if (par->chip == CHIP_360_TRIO3D_1X ||
1194 par->chip == CHIP_362_TRIO3D_2X ||
1195 par->chip == CHIP_368_TRIO3D_2X ||
1196 par->chip == CHIP_365_TRIO3D) {
1197 switch ((regval & 0xE0) >> 5) {
1198 case 0: /* 8MB -- only 4MB usable for display */
1199 case 1: /* 4MB with 32-bit bus */
1200 case 2: /* 4MB */
1201 info->screen_size = 4 << 20;
1202 break;
1203 case 4: /* 2MB on 365 Trio3D */
1204 case 6: /* 2MB */
1205 info->screen_size = 2 << 20;
1206 break;
1208 } else if (par->chip == CHIP_357_VIRGE_GX2 ||
1209 par->chip == CHIP_359_VIRGE_GX2P) {
1210 switch ((regval & 0xC0) >> 6) {
1211 case 1: /* 4MB */
1212 info->screen_size = 4 << 20;
1213 break;
1214 case 3: /* 2MB */
1215 info->screen_size = 2 << 20;
1216 break;
1218 } else
1219 info->screen_size = s3_memsizes[regval >> 5] << 10;
1220 info->fix.smem_len = info->screen_size;
1222 /* Find MCLK frequency */
1223 regval = vga_rseq(par->state.vgabase, 0x10);
1224 par->mclk_freq = ((vga_rseq(par->state.vgabase, 0x11) + 2) * 14318) / ((regval & 0x1F) + 2);
1225 par->mclk_freq = par->mclk_freq >> (regval >> 5);
1227 /* Restore locks */
1228 vga_wcrt(par->state.vgabase, 0x38, cr38);
1229 vga_wcrt(par->state.vgabase, 0x39, cr39);
1231 strcpy(info->fix.id, s3_names [par->chip]);
1232 info->fix.mmio_start = 0;
1233 info->fix.mmio_len = 0;
1234 info->fix.type = FB_TYPE_PACKED_PIXELS;
1235 info->fix.visual = FB_VISUAL_PSEUDOCOLOR;
1236 info->fix.ypanstep = 0;
1237 info->fix.accel = FB_ACCEL_NONE;
1238 info->pseudo_palette = (void*) (par->pseudo_palette);
1239 info->var.bits_per_pixel = 8;
1241 #ifdef CONFIG_FB_S3_DDC
1242 /* Enable MMIO if needed */
1243 if (s3fb_ddc_needs_mmio(par->chip)) {
1244 par->mmio = ioremap(info->fix.smem_start + MMIO_OFFSET, MMIO_SIZE);
1245 if (par->mmio)
1246 svga_wcrt_mask(par->state.vgabase, 0x53, 0x08, 0x08); /* enable MMIO */
1247 else
1248 dev_err(info->device, "unable to map MMIO at 0x%lx, disabling DDC",
1249 info->fix.smem_start + MMIO_OFFSET);
1251 if (!s3fb_ddc_needs_mmio(par->chip) || par->mmio)
1252 if (s3fb_setup_ddc_bus(info) == 0) {
1253 u8 *edid = fb_ddc_read(&par->ddc_adapter);
1254 par->ddc_registered = true;
1255 if (edid) {
1256 fb_edid_to_monspecs(edid, &info->monspecs);
1257 kfree(edid);
1258 if (!info->monspecs.modedb)
1259 dev_err(info->device, "error getting mode database\n");
1260 else {
1261 const struct fb_videomode *m;
1263 fb_videomode_to_modelist(info->monspecs.modedb,
1264 info->monspecs.modedb_len,
1265 &info->modelist);
1266 m = fb_find_best_display(&info->monspecs, &info->modelist);
1267 if (m) {
1268 fb_videomode_to_var(&info->var, m);
1269 /* fill all other info->var's fields */
1270 if (s3fb_check_var(&info->var, info) == 0)
1271 found = true;
1276 #endif
1277 if (!mode_option && !found)
1278 mode_option = "640x480-8@60";
1280 /* Prepare startup mode */
1281 if (mode_option) {
1282 rc = fb_find_mode(&info->var, info, mode_option,
1283 info->monspecs.modedb, info->monspecs.modedb_len,
1284 NULL, info->var.bits_per_pixel);
1285 if (!rc || rc == 4) {
1286 rc = -EINVAL;
1287 dev_err(info->device, "mode %s not found\n", mode_option);
1288 fb_destroy_modedb(info->monspecs.modedb);
1289 info->monspecs.modedb = NULL;
1290 goto err_find_mode;
1294 fb_destroy_modedb(info->monspecs.modedb);
1295 info->monspecs.modedb = NULL;
1297 /* maximize virtual vertical size for fast scrolling */
1298 info->var.yres_virtual = info->fix.smem_len * 8 /
1299 (info->var.bits_per_pixel * info->var.xres_virtual);
1300 if (info->var.yres_virtual < info->var.yres) {
1301 dev_err(info->device, "virtual vertical size smaller than real\n");
1302 goto err_find_mode;
1305 /* maximize virtual vertical size for fast scrolling */
1306 info->var.yres_virtual = info->fix.smem_len * 8 /
1307 (info->var.bits_per_pixel * info->var.xres_virtual);
1308 if (info->var.yres_virtual < info->var.yres) {
1309 dev_err(info->device, "virtual vertical size smaller than real\n");
1310 goto err_find_mode;
1313 rc = fb_alloc_cmap(&info->cmap, 256, 0);
1314 if (rc < 0) {
1315 dev_err(info->device, "cannot allocate colormap\n");
1316 goto err_alloc_cmap;
1319 rc = register_framebuffer(info);
1320 if (rc < 0) {
1321 dev_err(info->device, "cannot register framebuffer\n");
1322 goto err_reg_fb;
1325 printk(KERN_INFO "fb%d: %s on %s, %d MB RAM, %d MHz MCLK\n", info->node, info->fix.id,
1326 pci_name(dev), info->fix.smem_len >> 20, (par->mclk_freq + 500) / 1000);
1328 if (par->chip == CHIP_UNKNOWN)
1329 printk(KERN_INFO "fb%d: unknown chip, CR2D=%x, CR2E=%x, CRT2F=%x, CRT30=%x\n",
1330 info->node, vga_rcrt(par->state.vgabase, 0x2d), vga_rcrt(par->state.vgabase, 0x2e),
1331 vga_rcrt(par->state.vgabase, 0x2f), vga_rcrt(par->state.vgabase, 0x30));
1333 /* Record a reference to the driver data */
1334 pci_set_drvdata(dev, info);
1336 #ifdef CONFIG_MTRR
1337 if (mtrr) {
1338 par->mtrr_reg = -1;
1339 par->mtrr_reg = mtrr_add(info->fix.smem_start, info->fix.smem_len, MTRR_TYPE_WRCOMB, 1);
1341 #endif
1343 return 0;
1345 /* Error handling */
1346 err_reg_fb:
1347 fb_dealloc_cmap(&info->cmap);
1348 err_alloc_cmap:
1349 err_find_mode:
1350 #ifdef CONFIG_FB_S3_DDC
1351 if (par->ddc_registered)
1352 i2c_del_adapter(&par->ddc_adapter);
1353 if (par->mmio)
1354 iounmap(par->mmio);
1355 #endif
1356 pci_iounmap(dev, info->screen_base);
1357 err_iomap:
1358 pci_release_regions(dev);
1359 err_request_regions:
1360 /* pci_disable_device(dev); */
1361 err_enable_device:
1362 framebuffer_release(info);
1363 return rc;
1367 /* PCI remove */
1369 static void __devexit s3_pci_remove(struct pci_dev *dev)
1371 struct fb_info *info = pci_get_drvdata(dev);
1372 struct s3fb_info __maybe_unused *par = info->par;
1374 if (info) {
1376 #ifdef CONFIG_MTRR
1377 if (par->mtrr_reg >= 0) {
1378 mtrr_del(par->mtrr_reg, 0, 0);
1379 par->mtrr_reg = -1;
1381 #endif
1383 unregister_framebuffer(info);
1384 fb_dealloc_cmap(&info->cmap);
1386 #ifdef CONFIG_FB_S3_DDC
1387 if (par->ddc_registered)
1388 i2c_del_adapter(&par->ddc_adapter);
1389 if (par->mmio)
1390 iounmap(par->mmio);
1391 #endif
1393 pci_iounmap(dev, info->screen_base);
1394 pci_release_regions(dev);
1395 /* pci_disable_device(dev); */
1397 pci_set_drvdata(dev, NULL);
1398 framebuffer_release(info);
1402 /* PCI suspend */
1404 static int s3_pci_suspend(struct pci_dev* dev, pm_message_t state)
1406 struct fb_info *info = pci_get_drvdata(dev);
1407 struct s3fb_info *par = info->par;
1409 dev_info(info->device, "suspend\n");
1411 console_lock();
1412 mutex_lock(&(par->open_lock));
1414 if ((state.event == PM_EVENT_FREEZE) || (par->ref_count == 0)) {
1415 mutex_unlock(&(par->open_lock));
1416 console_unlock();
1417 return 0;
1420 fb_set_suspend(info, 1);
1422 pci_save_state(dev);
1423 pci_disable_device(dev);
1424 pci_set_power_state(dev, pci_choose_state(dev, state));
1426 mutex_unlock(&(par->open_lock));
1427 console_unlock();
1429 return 0;
1433 /* PCI resume */
1435 static int s3_pci_resume(struct pci_dev* dev)
1437 struct fb_info *info = pci_get_drvdata(dev);
1438 struct s3fb_info *par = info->par;
1439 int err;
1441 dev_info(info->device, "resume\n");
1443 console_lock();
1444 mutex_lock(&(par->open_lock));
1446 if (par->ref_count == 0) {
1447 mutex_unlock(&(par->open_lock));
1448 console_unlock();
1449 return 0;
1452 pci_set_power_state(dev, PCI_D0);
1453 pci_restore_state(dev);
1454 err = pci_enable_device(dev);
1455 if (err) {
1456 mutex_unlock(&(par->open_lock));
1457 console_unlock();
1458 dev_err(info->device, "error %d enabling device for resume\n", err);
1459 return err;
1461 pci_set_master(dev);
1463 s3fb_set_par(info);
1464 fb_set_suspend(info, 0);
1466 mutex_unlock(&(par->open_lock));
1467 console_unlock();
1469 return 0;
1473 /* List of boards that we are trying to support */
1475 static struct pci_device_id s3_devices[] __devinitdata = {
1476 {PCI_DEVICE(PCI_VENDOR_ID_S3, 0x8810), .driver_data = CHIP_XXX_TRIO},
1477 {PCI_DEVICE(PCI_VENDOR_ID_S3, 0x8811), .driver_data = CHIP_XXX_TRIO},
1478 {PCI_DEVICE(PCI_VENDOR_ID_S3, 0x8812), .driver_data = CHIP_M65_AURORA64VP},
1479 {PCI_DEVICE(PCI_VENDOR_ID_S3, 0x8814), .driver_data = CHIP_767_TRIO64UVP},
1480 {PCI_DEVICE(PCI_VENDOR_ID_S3, 0x8901), .driver_data = CHIP_XXX_TRIO64V2_DXGX},
1481 {PCI_DEVICE(PCI_VENDOR_ID_S3, 0x8902), .driver_data = CHIP_551_PLATO_PX},
1483 {PCI_DEVICE(PCI_VENDOR_ID_S3, 0x5631), .driver_data = CHIP_325_VIRGE},
1484 {PCI_DEVICE(PCI_VENDOR_ID_S3, 0x883D), .driver_data = CHIP_988_VIRGE_VX},
1485 {PCI_DEVICE(PCI_VENDOR_ID_S3, 0x8A01), .driver_data = CHIP_XXX_VIRGE_DXGX},
1486 {PCI_DEVICE(PCI_VENDOR_ID_S3, 0x8A10), .driver_data = CHIP_357_VIRGE_GX2},
1487 {PCI_DEVICE(PCI_VENDOR_ID_S3, 0x8A11), .driver_data = CHIP_359_VIRGE_GX2P},
1488 {PCI_DEVICE(PCI_VENDOR_ID_S3, 0x8A12), .driver_data = CHIP_359_VIRGE_GX2P},
1489 {PCI_DEVICE(PCI_VENDOR_ID_S3, 0x8A13), .driver_data = CHIP_36X_TRIO3D_1X_2X},
1490 {PCI_DEVICE(PCI_VENDOR_ID_S3, 0x8904), .driver_data = CHIP_365_TRIO3D},
1492 {0, 0, 0, 0, 0, 0, 0}
1496 MODULE_DEVICE_TABLE(pci, s3_devices);
1498 static struct pci_driver s3fb_pci_driver = {
1499 .name = "s3fb",
1500 .id_table = s3_devices,
1501 .probe = s3_pci_probe,
1502 .remove = __devexit_p(s3_pci_remove),
1503 .suspend = s3_pci_suspend,
1504 .resume = s3_pci_resume,
1507 /* Parse user speficied options */
1509 #ifndef MODULE
1510 static int __init s3fb_setup(char *options)
1512 char *opt;
1514 if (!options || !*options)
1515 return 0;
1517 while ((opt = strsep(&options, ",")) != NULL) {
1519 if (!*opt)
1520 continue;
1521 #ifdef CONFIG_MTRR
1522 else if (!strncmp(opt, "mtrr:", 5))
1523 mtrr = simple_strtoul(opt + 5, NULL, 0);
1524 #endif
1525 else if (!strncmp(opt, "fasttext:", 9))
1526 fasttext = simple_strtoul(opt + 9, NULL, 0);
1527 else
1528 mode_option = opt;
1531 return 0;
1533 #endif
1535 /* Cleanup */
1537 static void __exit s3fb_cleanup(void)
1539 pr_debug("s3fb: cleaning up\n");
1540 pci_unregister_driver(&s3fb_pci_driver);
1543 /* Driver Initialisation */
1545 static int __init s3fb_init(void)
1548 #ifndef MODULE
1549 char *option = NULL;
1551 if (fb_get_options("s3fb", &option))
1552 return -ENODEV;
1553 s3fb_setup(option);
1554 #endif
1556 pr_debug("s3fb: initializing\n");
1557 return pci_register_driver(&s3fb_pci_driver);
1560 /* ------------------------------------------------------------------------- */
1562 /* Modularization */
1564 module_init(s3fb_init);
1565 module_exit(s3fb_cleanup);