cgroup_freezer: prepare freezer_change_state() for full hierarchy support
[linux-2.6/libata-dev.git] / drivers / leds / leds-lm3530.c
blobb26306f6724dcebc1605625405625aeebe022298
1 /*
2 * Copyright (C) 2011 ST-Ericsson SA.
3 * Copyright (C) 2009 Motorola, Inc.
5 * License Terms: GNU General Public License v2
7 * Simple driver for National Semiconductor LM3530 Backlight driver chip
9 * Author: Shreshtha Kumar SAHU <shreshthakumar.sahu@stericsson.com>
10 * based on leds-lm3530.c by Dan Murphy <D.Murphy@motorola.com>
13 #include <linux/i2c.h>
14 #include <linux/leds.h>
15 #include <linux/slab.h>
16 #include <linux/platform_device.h>
17 #include <linux/input.h>
18 #include <linux/led-lm3530.h>
19 #include <linux/types.h>
20 #include <linux/regulator/consumer.h>
21 #include <linux/module.h>
23 #define LM3530_LED_DEV "lcd-backlight"
24 #define LM3530_NAME "lm3530-led"
26 #define LM3530_GEN_CONFIG 0x10
27 #define LM3530_ALS_CONFIG 0x20
28 #define LM3530_BRT_RAMP_RATE 0x30
29 #define LM3530_ALS_IMP_SELECT 0x41
30 #define LM3530_BRT_CTRL_REG 0xA0
31 #define LM3530_ALS_ZB0_REG 0x60
32 #define LM3530_ALS_ZB1_REG 0x61
33 #define LM3530_ALS_ZB2_REG 0x62
34 #define LM3530_ALS_ZB3_REG 0x63
35 #define LM3530_ALS_Z0T_REG 0x70
36 #define LM3530_ALS_Z1T_REG 0x71
37 #define LM3530_ALS_Z2T_REG 0x72
38 #define LM3530_ALS_Z3T_REG 0x73
39 #define LM3530_ALS_Z4T_REG 0x74
40 #define LM3530_REG_MAX 14
42 /* General Control Register */
43 #define LM3530_EN_I2C_SHIFT (0)
44 #define LM3530_RAMP_LAW_SHIFT (1)
45 #define LM3530_MAX_CURR_SHIFT (2)
46 #define LM3530_EN_PWM_SHIFT (5)
47 #define LM3530_PWM_POL_SHIFT (6)
48 #define LM3530_EN_PWM_SIMPLE_SHIFT (7)
50 #define LM3530_ENABLE_I2C (1 << LM3530_EN_I2C_SHIFT)
51 #define LM3530_ENABLE_PWM (1 << LM3530_EN_PWM_SHIFT)
52 #define LM3530_POL_LOW (1 << LM3530_PWM_POL_SHIFT)
53 #define LM3530_ENABLE_PWM_SIMPLE (1 << LM3530_EN_PWM_SIMPLE_SHIFT)
55 /* ALS Config Register Options */
56 #define LM3530_ALS_AVG_TIME_SHIFT (0)
57 #define LM3530_EN_ALS_SHIFT (3)
58 #define LM3530_ALS_SEL_SHIFT (5)
60 #define LM3530_ENABLE_ALS (3 << LM3530_EN_ALS_SHIFT)
62 /* Brightness Ramp Rate Register */
63 #define LM3530_BRT_RAMP_FALL_SHIFT (0)
64 #define LM3530_BRT_RAMP_RISE_SHIFT (3)
66 /* ALS Resistor Select */
67 #define LM3530_ALS1_IMP_SHIFT (0)
68 #define LM3530_ALS2_IMP_SHIFT (4)
70 /* Zone Boundary Register defaults */
71 #define LM3530_ALS_ZB_MAX (4)
72 #define LM3530_ALS_WINDOW_mV (1000)
73 #define LM3530_ALS_OFFSET_mV (4)
75 /* Zone Target Register defaults */
76 #define LM3530_DEF_ZT_0 (0x7F)
77 #define LM3530_DEF_ZT_1 (0x66)
78 #define LM3530_DEF_ZT_2 (0x4C)
79 #define LM3530_DEF_ZT_3 (0x33)
80 #define LM3530_DEF_ZT_4 (0x19)
82 /* 7 bits are used for the brightness : LM3530_BRT_CTRL_REG */
83 #define MAX_BRIGHTNESS (127)
85 struct lm3530_mode_map {
86 const char *mode;
87 enum lm3530_mode mode_val;
90 static struct lm3530_mode_map mode_map[] = {
91 { "man", LM3530_BL_MODE_MANUAL },
92 { "als", LM3530_BL_MODE_ALS },
93 { "pwm", LM3530_BL_MODE_PWM },
96 /**
97 * struct lm3530_data
98 * @led_dev: led class device
99 * @client: i2c client
100 * @pdata: LM3530 platform data
101 * @mode: mode of operation - manual, ALS, PWM
102 * @regulator: regulator
103 * @brighness: previous brightness value
104 * @enable: regulator is enabled
106 struct lm3530_data {
107 struct led_classdev led_dev;
108 struct i2c_client *client;
109 struct lm3530_platform_data *pdata;
110 enum lm3530_mode mode;
111 struct regulator *regulator;
112 enum led_brightness brightness;
113 bool enable;
117 * struct lm3530_als_data
118 * @config : value of ALS configuration register
119 * @imp_sel : value of ALS resistor select register
120 * @zone : values of ALS ZB(Zone Boundary) registers
122 struct lm3530_als_data {
123 u8 config;
124 u8 imp_sel;
125 u8 zones[LM3530_ALS_ZB_MAX];
128 static const u8 lm3530_reg[LM3530_REG_MAX] = {
129 LM3530_GEN_CONFIG,
130 LM3530_ALS_CONFIG,
131 LM3530_BRT_RAMP_RATE,
132 LM3530_ALS_IMP_SELECT,
133 LM3530_BRT_CTRL_REG,
134 LM3530_ALS_ZB0_REG,
135 LM3530_ALS_ZB1_REG,
136 LM3530_ALS_ZB2_REG,
137 LM3530_ALS_ZB3_REG,
138 LM3530_ALS_Z0T_REG,
139 LM3530_ALS_Z1T_REG,
140 LM3530_ALS_Z2T_REG,
141 LM3530_ALS_Z3T_REG,
142 LM3530_ALS_Z4T_REG,
145 static int lm3530_get_mode_from_str(const char *str)
147 int i;
149 for (i = 0; i < ARRAY_SIZE(mode_map); i++)
150 if (sysfs_streq(str, mode_map[i].mode))
151 return mode_map[i].mode_val;
153 return -EINVAL;
156 static void lm3530_als_configure(struct lm3530_platform_data *pdata,
157 struct lm3530_als_data *als)
159 int i;
160 u32 als_vmin, als_vmax, als_vstep;
162 if (pdata->als_vmax == 0) {
163 pdata->als_vmin = 0;
164 pdata->als_vmax = LM3530_ALS_WINDOW_mV;
167 als_vmin = pdata->als_vmin;
168 als_vmax = pdata->als_vmax;
170 if ((als_vmax - als_vmin) > LM3530_ALS_WINDOW_mV)
171 pdata->als_vmax = als_vmax = als_vmin + LM3530_ALS_WINDOW_mV;
173 /* n zone boundary makes n+1 zones */
174 als_vstep = (als_vmax - als_vmin) / (LM3530_ALS_ZB_MAX + 1);
176 for (i = 0; i < LM3530_ALS_ZB_MAX; i++)
177 als->zones[i] = (((als_vmin + LM3530_ALS_OFFSET_mV) +
178 als_vstep + (i * als_vstep)) * LED_FULL) / 1000;
180 als->config =
181 (pdata->als_avrg_time << LM3530_ALS_AVG_TIME_SHIFT) |
182 (LM3530_ENABLE_ALS) |
183 (pdata->als_input_mode << LM3530_ALS_SEL_SHIFT);
185 als->imp_sel =
186 (pdata->als1_resistor_sel << LM3530_ALS1_IMP_SHIFT) |
187 (pdata->als2_resistor_sel << LM3530_ALS2_IMP_SHIFT);
190 static int lm3530_init_registers(struct lm3530_data *drvdata)
192 int ret = 0;
193 int i;
194 u8 gen_config;
195 u8 brt_ramp;
196 u8 brightness;
197 u8 reg_val[LM3530_REG_MAX];
198 struct lm3530_platform_data *pdata = drvdata->pdata;
199 struct i2c_client *client = drvdata->client;
200 struct lm3530_pwm_data *pwm = &pdata->pwm_data;
201 struct lm3530_als_data als;
203 memset(&als, 0, sizeof(struct lm3530_als_data));
205 gen_config = (pdata->brt_ramp_law << LM3530_RAMP_LAW_SHIFT) |
206 ((pdata->max_current & 7) << LM3530_MAX_CURR_SHIFT);
208 switch (drvdata->mode) {
209 case LM3530_BL_MODE_MANUAL:
210 gen_config |= LM3530_ENABLE_I2C;
211 break;
212 case LM3530_BL_MODE_ALS:
213 gen_config |= LM3530_ENABLE_I2C;
214 lm3530_als_configure(pdata, &als);
215 break;
216 case LM3530_BL_MODE_PWM:
217 gen_config |= LM3530_ENABLE_PWM | LM3530_ENABLE_PWM_SIMPLE |
218 (pdata->pwm_pol_hi << LM3530_PWM_POL_SHIFT);
219 break;
222 brt_ramp = (pdata->brt_ramp_fall << LM3530_BRT_RAMP_FALL_SHIFT) |
223 (pdata->brt_ramp_rise << LM3530_BRT_RAMP_RISE_SHIFT);
225 if (drvdata->brightness)
226 brightness = drvdata->brightness;
227 else
228 brightness = drvdata->brightness = pdata->brt_val;
230 if (brightness > drvdata->led_dev.max_brightness)
231 brightness = drvdata->led_dev.max_brightness;
233 reg_val[0] = gen_config; /* LM3530_GEN_CONFIG */
234 reg_val[1] = als.config; /* LM3530_ALS_CONFIG */
235 reg_val[2] = brt_ramp; /* LM3530_BRT_RAMP_RATE */
236 reg_val[3] = als.imp_sel; /* LM3530_ALS_IMP_SELECT */
237 reg_val[4] = brightness; /* LM3530_BRT_CTRL_REG */
238 reg_val[5] = als.zones[0]; /* LM3530_ALS_ZB0_REG */
239 reg_val[6] = als.zones[1]; /* LM3530_ALS_ZB1_REG */
240 reg_val[7] = als.zones[2]; /* LM3530_ALS_ZB2_REG */
241 reg_val[8] = als.zones[3]; /* LM3530_ALS_ZB3_REG */
242 reg_val[9] = LM3530_DEF_ZT_0; /* LM3530_ALS_Z0T_REG */
243 reg_val[10] = LM3530_DEF_ZT_1; /* LM3530_ALS_Z1T_REG */
244 reg_val[11] = LM3530_DEF_ZT_2; /* LM3530_ALS_Z2T_REG */
245 reg_val[12] = LM3530_DEF_ZT_3; /* LM3530_ALS_Z3T_REG */
246 reg_val[13] = LM3530_DEF_ZT_4; /* LM3530_ALS_Z4T_REG */
248 if (!drvdata->enable) {
249 ret = regulator_enable(drvdata->regulator);
250 if (ret) {
251 dev_err(&drvdata->client->dev,
252 "Enable regulator failed\n");
253 return ret;
255 drvdata->enable = true;
258 for (i = 0; i < LM3530_REG_MAX; i++) {
259 /* do not update brightness register when pwm mode */
260 if (lm3530_reg[i] == LM3530_BRT_CTRL_REG &&
261 drvdata->mode == LM3530_BL_MODE_PWM) {
262 if (pwm->pwm_set_intensity)
263 pwm->pwm_set_intensity(reg_val[i],
264 drvdata->led_dev.max_brightness);
265 continue;
268 ret = i2c_smbus_write_byte_data(client,
269 lm3530_reg[i], reg_val[i]);
270 if (ret)
271 break;
274 return ret;
277 static void lm3530_brightness_set(struct led_classdev *led_cdev,
278 enum led_brightness brt_val)
280 int err;
281 struct lm3530_data *drvdata =
282 container_of(led_cdev, struct lm3530_data, led_dev);
283 struct lm3530_platform_data *pdata = drvdata->pdata;
284 struct lm3530_pwm_data *pwm = &pdata->pwm_data;
285 u8 max_brightness = led_cdev->max_brightness;
287 switch (drvdata->mode) {
288 case LM3530_BL_MODE_MANUAL:
290 if (!drvdata->enable) {
291 err = lm3530_init_registers(drvdata);
292 if (err) {
293 dev_err(&drvdata->client->dev,
294 "Register Init failed: %d\n", err);
295 break;
299 /* set the brightness in brightness control register*/
300 err = i2c_smbus_write_byte_data(drvdata->client,
301 LM3530_BRT_CTRL_REG, brt_val);
302 if (err)
303 dev_err(&drvdata->client->dev,
304 "Unable to set brightness: %d\n", err);
305 else
306 drvdata->brightness = brt_val;
308 if (brt_val == 0) {
309 err = regulator_disable(drvdata->regulator);
310 if (err)
311 dev_err(&drvdata->client->dev,
312 "Disable regulator failed\n");
313 drvdata->enable = false;
315 break;
316 case LM3530_BL_MODE_ALS:
317 break;
318 case LM3530_BL_MODE_PWM:
319 if (pwm->pwm_set_intensity)
320 pwm->pwm_set_intensity(brt_val, max_brightness);
321 break;
322 default:
323 break;
327 static ssize_t lm3530_mode_get(struct device *dev,
328 struct device_attribute *attr, char *buf)
330 struct led_classdev *led_cdev = dev_get_drvdata(dev);
331 struct lm3530_data *drvdata;
332 int i, len = 0;
334 drvdata = container_of(led_cdev, struct lm3530_data, led_dev);
335 for (i = 0; i < ARRAY_SIZE(mode_map); i++)
336 if (drvdata->mode == mode_map[i].mode_val)
337 len += sprintf(buf + len, "[%s] ", mode_map[i].mode);
338 else
339 len += sprintf(buf + len, "%s ", mode_map[i].mode);
341 len += sprintf(buf + len, "\n");
343 return len;
346 static ssize_t lm3530_mode_set(struct device *dev, struct device_attribute
347 *attr, const char *buf, size_t size)
349 struct led_classdev *led_cdev = dev_get_drvdata(dev);
350 struct lm3530_data *drvdata;
351 struct lm3530_pwm_data *pwm;
352 u8 max_brightness;
353 int mode, err;
355 drvdata = container_of(led_cdev, struct lm3530_data, led_dev);
356 pwm = &drvdata->pdata->pwm_data;
357 max_brightness = led_cdev->max_brightness;
358 mode = lm3530_get_mode_from_str(buf);
359 if (mode < 0) {
360 dev_err(dev, "Invalid mode\n");
361 return mode;
364 drvdata->mode = mode;
366 /* set pwm to low if unnecessary */
367 if (mode != LM3530_BL_MODE_PWM && pwm->pwm_set_intensity)
368 pwm->pwm_set_intensity(0, max_brightness);
370 err = lm3530_init_registers(drvdata);
371 if (err) {
372 dev_err(dev, "Setting %s Mode failed :%d\n", buf, err);
373 return err;
376 return sizeof(drvdata->mode);
378 static DEVICE_ATTR(mode, 0644, lm3530_mode_get, lm3530_mode_set);
380 static int __devinit lm3530_probe(struct i2c_client *client,
381 const struct i2c_device_id *id)
383 struct lm3530_platform_data *pdata = client->dev.platform_data;
384 struct lm3530_data *drvdata;
385 int err = 0;
387 if (pdata == NULL) {
388 dev_err(&client->dev, "platform data required\n");
389 return -ENODEV;
392 /* BL mode */
393 if (pdata->mode > LM3530_BL_MODE_PWM) {
394 dev_err(&client->dev, "Illegal Mode request\n");
395 return -EINVAL;
398 if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
399 dev_err(&client->dev, "I2C_FUNC_I2C not supported\n");
400 return -EIO;
403 drvdata = devm_kzalloc(&client->dev, sizeof(struct lm3530_data),
404 GFP_KERNEL);
405 if (drvdata == NULL)
406 return -ENOMEM;
408 drvdata->mode = pdata->mode;
409 drvdata->client = client;
410 drvdata->pdata = pdata;
411 drvdata->brightness = LED_OFF;
412 drvdata->enable = false;
413 drvdata->led_dev.name = LM3530_LED_DEV;
414 drvdata->led_dev.brightness_set = lm3530_brightness_set;
415 drvdata->led_dev.max_brightness = MAX_BRIGHTNESS;
417 i2c_set_clientdata(client, drvdata);
419 drvdata->regulator = devm_regulator_get(&client->dev, "vin");
420 if (IS_ERR(drvdata->regulator)) {
421 dev_err(&client->dev, "regulator get failed\n");
422 err = PTR_ERR(drvdata->regulator);
423 drvdata->regulator = NULL;
424 return err;
427 if (drvdata->pdata->brt_val) {
428 err = lm3530_init_registers(drvdata);
429 if (err < 0) {
430 dev_err(&client->dev,
431 "Register Init failed: %d\n", err);
432 return err;
435 err = led_classdev_register(&client->dev, &drvdata->led_dev);
436 if (err < 0) {
437 dev_err(&client->dev, "Register led class failed: %d\n", err);
438 return err;
441 err = device_create_file(drvdata->led_dev.dev, &dev_attr_mode);
442 if (err < 0) {
443 dev_err(&client->dev, "File device creation failed: %d\n", err);
444 err = -ENODEV;
445 goto err_create_file;
448 return 0;
450 err_create_file:
451 led_classdev_unregister(&drvdata->led_dev);
452 return err;
455 static int __devexit lm3530_remove(struct i2c_client *client)
457 struct lm3530_data *drvdata = i2c_get_clientdata(client);
459 device_remove_file(drvdata->led_dev.dev, &dev_attr_mode);
461 if (drvdata->enable)
462 regulator_disable(drvdata->regulator);
463 led_classdev_unregister(&drvdata->led_dev);
464 return 0;
467 static const struct i2c_device_id lm3530_id[] = {
468 {LM3530_NAME, 0},
471 MODULE_DEVICE_TABLE(i2c, lm3530_id);
473 static struct i2c_driver lm3530_i2c_driver = {
474 .probe = lm3530_probe,
475 .remove = __devexit_p(lm3530_remove),
476 .id_table = lm3530_id,
477 .driver = {
478 .name = LM3530_NAME,
479 .owner = THIS_MODULE,
483 module_i2c_driver(lm3530_i2c_driver);
485 MODULE_DESCRIPTION("Back Light driver for LM3530");
486 MODULE_LICENSE("GPL v2");
487 MODULE_AUTHOR("Shreshtha Kumar SAHU <shreshthakumar.sahu@stericsson.com>");